Commit Graph

479 Commits

Author SHA1 Message Date
ninh
27aa6c289f components/pm: Add slp gpio configure workaround 2021-01-15 15:34:45 +08:00
Michael (XIAO Xufeng)
ea996df725 Merge branch 'feature/rmt_support_user_context_in_translator' into 'master'
rmt: support user context in translator

Closes IDFGH-4135 and IDFGH-3237

See merge request espressif/esp-idf!10894
2021-01-14 19:26:26 +08:00
morris
95e712039c rmt: add workaround to get user context in a graceful way 2021-01-14 11:01:41 +08:00
Nishanth Samala
21bb6f2334 rmt: support rmt user context in translator
Merges https://github.com/espressif/esp-idf/pull/6002
2021-01-14 10:51:25 +08:00
morris
e6d23a35ec gdma: dynamic alloc DMA channels 2021-01-13 10:52:27 +08:00
Armando
2d37bfa126 driver: Add adc_digi single conversion mode
- add lock for single read and continuous read APIs
- update onetime read start singal delay for hardware limitation[*]
- move adc_caps to soc_caps.h
- update license dates

[*] There is a hardware limitation. If the APB clock frequency is high, the
step of this reg signal: ``onetime_start`` may not be captured by the
ADC digital controller (when its clock frequency is too slow). A rough
estimate for this step should be at least 3 ADC digital controller
clock cycle.
2020-12-23 09:53:24 +11:00
Angus Gratton
f09b8ae7a4 driver: Add esp32c3 ADC driver
Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00
Angus Gratton
27a9cf861e driver: Add esp32c3 drivers (except ADC/DAC) and update tests
Some ESP32-C3 drivers are still pending.

Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00
Cao Sen Miao
d6f0b4af6f adc_i2s: solve the i2s_adc issue when using wifi 2020-12-07 10:45:04 +08:00
Ivan Grokhotkov
d890a516a1 driver: add notes about GPIO36/39 issue (ECO 3.11) workaround
Closes IDFGH-1917
Closes https://github.com/espressif/esp-idf/issues/4117
2020-12-07 10:45:04 +08:00
Angus Gratton
5228d9f9ce esp32c3: Apply one-liner/small changes for ESP32-C3 2020-12-01 10:58:50 +11:00
chaijie
a48b5246cc ESP32: Fix xtal 32k not oscillate or oscillate too slowly issue
ESP32 in revision0 and revision1 uses touchpad to provide
current to oscillate xtal 32k. But revision2 and revision3
do not need to do that.
Note: touchpad can not work and toupad/ULP wakeup sources
are not available when toupad provides current to xtal 32k
2020-11-23 19:38:11 +08:00
Cao Sen Miao
6eee601cf6 i2c: Add supports on esp32s3 2020-11-12 11:32:45 +08:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
morris
1be923acb4 rmt: rename always_on to aware_dfs 2020-11-05 19:00:55 +08:00
morris
ff976867b3 rmt: split TX and RX in LL driver
Split TX and RX function in LL driver.
Channel number is encoded in driver layer.
Added channel signal list in periph.c
2020-11-05 19:00:55 +08:00
Michael (XIAO Xufeng)
9a394e1aa0 Merge branch 'feature/spi_bringup_esp32s3' into 'master'
spi: bringup on esp32s3

See merge request espressif/esp-idf!10107
2020-10-27 00:51:42 +08:00
Armando
f7e91ef6c1 spi: esp32s3 bringup for spi 2020-10-26 11:28:34 +08:00
morris
bb1369b922 dedicated gpio: add driver 2020-10-20 21:06:09 +08:00
morris
153e819e8a pcnt: add rotary encoder example 2020-10-19 11:56:18 +08:00
Michael (XIAO Xufeng)
1966f00f0b soc: updates caps usage
We should define caps as 1 if true. When use the caps macros, #if and
 #if ! should be used instead of #ifdef/#ifndef.
2020-10-17 16:10:17 +08:00
Michael (XIAO Xufeng)
647dea9395 soc: combine xxx_caps.h into one soc_caps.h
During HAL layer refactoring and new chip bringup, we have several
caps.h for each part, to reduce the conflicts to minimum. But this is
The capabilities headers will be relataive stable once completely
written (maybe after the featues are supported by drivers).

Now ESP32 and ESP32-S2 drivers are relative stable, making it a good
time to combine all these caps.h into one soc_caps.h

This cleanup also move HAL config and pin config into separated files,
to make the responsibilities of these headers more clear. This is
helpful for the stabilities of soc_caps.h because we want to make it
public some day.
2020-10-17 16:10:15 +08:00
Michael (XIAO Xufeng)
ecca44df93 Merge branch 'bugfix/fix_adc-dma_reading_gap_for_esp32' into 'master'
bugfix(adc): missing ranges of ADC-DMA codes in ESP32

Closes DIG-53

See merge request espressif/esp-idf!10521
2020-10-16 23:02:35 +08:00
fuzhibo
9cd5e6f8c9 bugfix(adc): missing ranges of ADC codes in ESP32 2020-10-12 07:41:03 +00:00
Darian Leung
4c57f50fe4 TWAI: ISR runs when cache is disabled
This commit adds the feature where the TWAI ISR will continue to
run even if the cache is disabled. Whilst cache is disabled, any
received messages will go into the RX queue, and any pending TX
messages in the TX queue will be transmitted. This feature should
be enabled using the CONFIG_TWAI_ISR_IN_IRAM option.
2020-10-10 14:19:32 +08:00
Michael (XIAO Xufeng)
91af5eaf4f Merge branch 'refactor/twai_hal_state' into 'master'
Refactor TWAI HAL to store state information

Closes IDF-1633

See merge request espressif/esp-idf!9789
2020-09-03 23:22:30 +08:00
Wu Bo Wen
658b56a690 doc/adc: modifications in the adc documentation and adc headers 2020-09-02 11:30:48 +00:00
Darian Leung
7398390049 TWAI: Track HW state in HAL
This commit refactors the TWAI HAL such that it
now tracks  harwdare state instead of the driver
layer. Some HAL and LL cleanup was also done.
2020-09-02 13:03:41 +08:00
Michael (XIAO Xufeng)
2b323e7180 Merge branch 'bugfix/fix_dac_driver_ut' into 'master'
Driver(dac): fix DAC-DMA driver and unit test

Closes IDF-1407

See merge request espressif/esp-idf!8814
2020-08-31 00:05:34 +08:00
fuzhibo
0914dfbb6a dfiver(dac): add dac dma driver and unit test 2020-08-26 06:23:24 +00:00
fuzhibo
bd92e95160 driver(adc): add adc-dma code for esp32 2020-08-26 03:54:02 +00:00
dongyou
97ae87df41 wifi, bt: move esp_phy_common_clock_disable into periph_ctrl and put it into IRAM
Replace periph_module_enable/disable by periph_wifi_bt_common_module_enable which are in IRAM.
AddIRAM_ATTR periph_ll_wifi_bt_module_enable_clk_clear_rstandIRAM_ATTR periph_ll_wifi_bt_module_disable_clk_set_rstto fit O0 optimization level.
Delete duplicated spinlock and counter.
2020-08-05 11:04:16 +08:00
Michael (XIAO Xufeng)
1aabab0160 Merge branch 'bugfix/i2c_const_function_signature' into 'master'
I2C: add const to signature of master_write function

Closes IDFGH-3324

See merge request espressif/esp-idf!9306
2020-07-27 16:31:20 +08:00
Michael (XIAO Xufeng)
f6dd63d03d spi_slave_hd: new driver for spi slave in half duplex mode 2020-07-11 00:00:50 +08:00
Michael (XIAO Xufeng)
a50ea8ad55 spi: allow force pins being configured throug GPIO matrix 2020-07-11 00:00:47 +08:00
morris
a4d0033c03 esp_rom: extract common GPIO apis into esp_rom_gpio.h 2020-07-07 11:40:19 +08:00
Peter Schaefer
f08743e452 Added const for pointer in master_write method, so that a const array can be passed to this fcn.
Signed-off-by: wubowen <wubowen@espressif.com>

Merges https://github.com/espressif/esp-idf/pull/5307

explicitly convert a const ptr to non-const because we actually don't modify it.
2020-07-06 03:37:39 +00:00
fuzhibo
8d922847af driver(adc): esp32s2 support API adc2_vref_to_gpio 2020-07-01 06:21:45 +00:00
Darian Leung
97721d469c TWAI: Add ESP32-S2 support
This commit adds TWAI driver support for the
ESP32-S2. The following features were added:

- Expanded BRP support
- Expanded CLKOUT Divider Support
- Updated example READMEs
2020-06-30 16:56:03 +08:00
Michael (XIAO Xufeng)
0d725c14cc Merge branch 'bugfix/fix_uart_read_write_different_in_buffer_type_issue' into 'master'
Bugfix(driver): fix uart_read_byte and uart_write_byte different in buffer type issue

Closes IDFGH-2418

See merge request espressif/esp-idf!8925
2020-06-15 15:55:53 +08:00
Angus Gratton
1c09cb6769 Merge branch 'bugfix/doc_macro_definitions' into 'master'
doc: Fix macro definitions for different targets

See merge request espressif/esp-idf!8999
2020-06-12 16:37:41 +08:00
Angus Gratton
8193b188e8 driver: Fix some doxygen warnings 2020-06-12 14:31:37 +10:00
chenjianqiang
c11621e64e timer: add return task awoken for timer callback 2020-06-11 16:02:55 +08:00
houwenxiang
61e3259f22 Driver(UART): fix uart_read_byte and uart_write_byte different in buffer type issue. 2020-06-10 16:22:06 +08:00
fuzhibo
3cc2d0e9a4 Driver(adc): Disable the synchronization operation function of ADC1 and DAC
Closes IDF-1585
2020-06-01 16:23:47 +08:00
houwenxiang
b35d9002f3 driver(I2S): Fix i2s_comm_format_t configuration parameter does not match the TRM bug.
When I2S `i2s_comm_format_t` is set to `I2S_COMM_FORMAT_I2S_MSB`, the data should launch at first BCK. But not in fact, this MR fixed this issue.

For compatibility, several nwe parameters have been added, and the old parameters will be removed in the future.

    closes https://github.com/espressif/esp-idf/issues/5065

    closes https://github.com/espressif/esp-idf/issues/4957

    closes https://github.com/espressif/esp-idf/issues/2978

    closes https://github.com/espressif/esp-idf/issues/5136

    Merges https://github.com/espressif/esp-idf/pull/4522
2020-05-18 19:55:30 +08:00
Michael (XIAO Xufeng)
9d98111652 Merge branch 'bugfix/spi_bus_lock_missing_semphrstatic' into 'master'
spi: fix config break and reduce overhead of the bus lock on SPI1

Closes IDFGH-3017

See merge request espressif/esp-idf!8221
2020-04-27 12:57:19 +08:00
morris
e0b9f7be6d periph_clk_gating: add reference counter 2020-04-23 19:29:15 +08:00
michael
fdf983e0c4 spi: fix config break and reduce overhead of the bus lock on SPI1
The SPI bus lock on SPI1 introduces two side effects:

1. The device lock for the main flash requires the
`CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION` to be selected, however this
option is disabled by default in earlier IDF versions. Some developers
may find their project cannot be built by their old sdkconfig files.

2. Usually we don't need the lock on the SPI1 bus, due to it's
restrictions. However the overhead still exists in this case, the IRAM
cost for static version of semaphore functions, and the time cost when
getting and releasing the lock.

This commit:

1. Add a CONFIG_SPI_FLASH_BYPASS_MAIN_LOCK option, which will forbid the
space cost, as well as the initialization of the main bus lock.

2. When the option is not selected, the bus lock is used, the
`CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION` will be selected explicitly.

3. Revert default value of `CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION`
to `n`.

introduced in 49a48644e4.

Closes https://github.com/espressif/esp-idf/issues/5046
2020-04-22 16:06:13 +08:00
dowster
7b02fdf45a Fix typo with sigmadelta.h #ifdef 2020-04-17 22:52:00 -05:00