-Merges the addition of extended caps IE for assoc req, probe resp
and beacons in a single place. This ensures that there are no
duplicate Extended Caps IE in the frame. Moves the capability
indication for BTM and HT20/40 from supplicant to wifi libs.
-Fix issue with frequent disconections when scanning for only a single
channel.
-Prints error message and returns ESP_ERR_NOT_SUPPORTED in case
esp32c2 tries to set bandwidth to HT40.
1. Added SOC caps dependency for enabling 192 bit security in wifi enterprise example
2. Fixed authmode in log and connected event for WPA3 enterprise 192 bit security
1. Update documentation for WPA3 Enterprise and WPA3 Enterprise 192-bit
mode
2. Update documentation for WPA3 OWE and OWE transition mode
3. Update documentation related to SAE PK, SAE PWE and Transition Disable
4. Update documnetation for wifi connect API
5. Fix config paramter information for wifi scan start
6. Fix documentation related to scan threshold config setting
7. Replace ESP_ERR_WIFI_ARG error code as ESP_ERR_INVALID_ARG
8. Update documentation for 802.11R Fast transition
1) Ignore immediate assoc req received from the station while we are
processing the older one
2) Create station mutex (sta->lock) only for stations connecting with wpa3
security
3) Fix regression caused by 4cb4faa9
Some APs are configured to hide the SSID, the length field of the SSID element
in the Beacon frame is set to 0. This can cause incorrect parsing of the Beacon
by the Wi-Fi MAC hardware.
Some APs send two beacon frames with different BSSID in a TBTT cycle. After
correctly parsing the beacon of the associated AP, it continue to receive the
other beacon frame, which will cause the MAC to remain in a wait RX/TXING
state, blocking the Wi-Fi go to sleep.
Enable FTM for ESP32C2 and update wifi libs with below fixes -
1. Bugfixes in Initiator and Responder mode
2. Fix wrong RTT value in first FTM procedure without connection
3. Update FTM calibration values for ESP32S2, S3, C3 and C2
4. Update distance estimation logic
5. Add some useful command parameters in FTM example
6. Fix bug when number of FTM measurement frames received is more
than (number_of_brusts * FTMs per brust).
Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
1. Increase timeout value for NDP Accepted/Rejected events.
2. Update publisher ID incase publisher restarts(service).
3. Ignore service discovery frames with invalid/inactive service ID.
4. Update NAN documentation
1) Fix issue during split scan to allow for data tx.
2) Fix issue when parsing wpa_ie to set correct authmode when AP
supports both WPA_EAP and WPA_EAP_SHA256 authmode.
Closes https://github.com/espressif/esp-idf/issues/11202
3) Fix an occasional crash during sta roam.
4) Add home_channel_dwell_time to wifi_scan_config_t. This allows
configuration of the time spent between scanning consecutive
channels for tx.
