alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-21 06:56:11 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
31,905 Commits 19 Branches 147 Tags 378 MiB
2e34e6c02c
Commit Graph

31905 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
harshal.patil
85e18aa755
fix(mbedtls/gcm): Avoid using GCM hardware when config MBEDTLS_HARDWARE_GCM is disabled 2024-02-16 11:55:02 +05:30
harshal.patil
7e4d273e45
fix(mbedtls/gcm): Fix build failure when config MBEDTLS_HARDWARE_GCM is disabled 2024-02-16 11:55:01 +05:30
Ondrej Kosta
8d8fd2b765 feat(esp_eth): added SPI Ethernet module polling mode 
Closes https://github.com/espressif/esp-idf/issues/12682
 2024-02-15 14:27:45 +00:00
Mahavir Jain
83ec466b26 fix(ota): additional checks for secure version in anti-rollback case 
Some additional checks related to secure version of the application in
anti-rollback case have been added to avoid any attempts to boot lower
security version but valid application (e.g., passive partition image).

- Read secure_version under sha256 protection

- First check has been added in the bootloader to ensure correct secure
  version after application verification and loading stage. This check
  happens before setting up the flash cache mapping and handling over
  the final control to application. This check ensures that application
  was not swapped (e.g., to lower security version but valid image) just
  before the load stage in bootloader.

- Second check has been added in the application startup code to ensure
  that currently booting app has higher security version than the one
  programmed in the eFuse for anti-rollback scenario. This will ensure
  that only the legit application boots-up on the device for
  anti-rollback case.
 2024-02-15 15:10:28 +02:00
Bogdan Kolendovskyy
5b9b27ff75 esp_eth: Add functions to access PHY using MDIO 
Specifically:
  - Set/get address
  - Read/write data at address with specified MDIO access function
  - Read/write both address and data with a single call
 2024-02-13 12:47:46 +01:00
Rahul Tank
0b0648eddb fix(nimble): Removed double free of packet 2024-02-13 14:40:51 +05:30
Bogdan Kolendovskyy
7cb91c19cd fix(esp_eth): ip101-specific reset_hw to match reset timings from datasheet 
IP101 requires 10ms reset assertion time and 10ms post-reset delay to properly initialize.
 2024-02-09 15:04:12 +01:00
Adam Múdry
910c82b27c fix(examples): Disable formatting SD cards in storage examples by default 2024-02-08 14:22:45 +01:00
Roshan Bangar
52d36bee61 Blufi : fix blufi deinit 2024-02-08 17:14:00 +05:30
luomanruo
f5a0d5d0bc ble(update): 
Update h2 lib to eb112893
Update c6 lib to eb112893
 2024-02-07 17:29:32 +08:00
gongyantao
aad082a795 fix(bt/bluedroid): fix dangling pointer issue when logging remove section 2024-02-07 14:58:08 +08:00
InfiniteYuan
34b0450241 ble_mesh: example: fix the structure init order to meet C++ requirements 
Closes https://github.com/espressif/esp-idf/issues/8110
 2024-02-07 13:05:23 +08:00
InfiniteYuan
88fc51f107 ble_mesh: stack: fix the structure init order to meet C++ requirements 2024-02-07 10:21:31 +08:00
Sudeep Mohanty
746b8bf98f fix(ulp_riscv): Updated RTC I2C to use open-drain IOs 
This commit updates the RTC I2C driver in the ULP RISC-V to initialize
all I2C IOs in open-drain mode.
 2024-02-06 08:42:12 +01:00
InfiniteYuan
4a2290fce0 feat: ble mesh: improve ble mesh deinit when nimble enable 2024-02-06 14:44:32 +08:00
InfiniteYuan
31ca7c9a8c ble_mesh: update ble mesh ble adv type 2024-02-06 14:15:53 +08:00
morris
4ae845cd3e fix(rgb_lcd): relax the check for the data line GPIO 
There are a bunch of cases you might want some pins not exposed.

Eg.

  * Reading say 8 bit data and outputting the top 5 bits, discarding the rest by not mapping those data pins to output pins

 * Not using hsync/vsync because sync data is embedded within the data bits for more timing flexibility (eg. interlacing).

 * Using the LCD module as a high speed parallel data output bus, with no need for sync/control pins.

Removing this validation makes these cases work.

Merges https://github.com/espressif/esp-idf/pull/13103
 2024-02-06 10:35:11 +08:00
zhiweijian
add7c68104 feat(ble/controller): Add API to get BLE controller status on ESP32 2024-02-05 16:07:19 +08:00
zhiweijian
fd8bfba10a Fixed xQueueSemaphoreTask assert when deinit host during scan 2024-02-05 16:06:37 +08:00
nilesh.kale
fee1e43f09 feat(mbedtls): updated mbedtls version from 3.5.0 to 3.5.2 
This updates the submodule mbedtls to its latest version 3.5.2.
 2024-02-05 12:50:43 +05:30
Jiang Jiang Jian
7380f96017 Merge branch 'bugfix/bugfix_for_radio_spinel' into 'release/v5.1' 
fix(openthread): fix openthread configurations for radio spinle on 5.1

See merge request espressif/esp-idf!28872
 2024-02-05 14:15:15 +08:00
Jiang Jiang Jian
eb4fa7234f Merge branch 'backport/openthread_related_mr_v51' into 'release/v5.1' 
Backport openthread fix to v5.1

See merge request espressif/esp-idf!28819
 2024-02-05 14:15:00 +08:00
chenjianhua
4e4f494ca7 feat(bt/bluedroid): Support get status of bluedroid host 2024-02-04 16:50:36 +08:00
chenjianhua
cf1008a064 fix(bt/example): Fixed UART HCI when flow control is off on ESP32C3 2024-02-04 16:50:27 +08:00
chenjianhua
ad7a2831b2 feat(bt/bluedroid): Make the max number of bond device to be configurable 2024-02-04 16:50:18 +08:00
zhanghaipeng
a95d480780 fix(ble/controller): Fixed tx count in direct test mode on ESP32-C3 and ESP32-S3 
- Fixed tx count in direct test mode on ESP32-C3 and ESP32-S3
- fixed modem sleep enter failed sometimes
 2024-02-04 14:30:19 +08:00
chenjianhua
f86a5ffb2a fix(bt): Update bt lib for ESP32-C3 and ESP32-S3(91980c2) 
- Fixed scheduling when modem sleep wakeup delayed
- Fixed IRQ FIFO overflow when enter critical
- Fixed clock sync timeout for modem sleep
- Fixed directed adv with RPA when privacy disabled
- Fixed instant passed for connection update and PHY update
 2024-02-04 14:30:10 +08:00
Xu Si Yu
3c6ee5a957 fix(openthread): fix openthread configurations for radio spinle on 5.1 2024-02-04 11:50:41 +08:00
Marius Vikhammer
1e3c43297d docs(build): add cannonical stable url to all docs 2024-02-02 10:36:33 +08:00
morris
8ab2edda00 fix(mcpwm): reset GPIO used by generator after delete 
Closes https://github.com/espressif/esp-idf/issues/12980
 2024-02-01 17:49:18 +08:00
Fu Hanxi
d2b1e5b577
ci: limit idf-build-apps version to 1.x in pre-commit config file 2024-02-01 09:56:42 +01:00
zwx
5c74483fb6 feat(openthread): disable the rx on when idle in coex scenario 2024-02-01 14:53:57 +08:00
zwx
d117ae0d21 fix(openthread): fix RCP handle timeout crashing issue 
* update openthread upstream
 2024-02-01 14:17:04 +08:00
zwx
ff1fd81e2f fix(openthread): support uart ISR in IRAM 2024-02-01 14:16:00 +08:00
zwx
1cc34e69d7 fix(802154): fix pending tx will be delayed issue 2024-02-01 14:16:00 +08:00
Kapil Gupta
8a01702d65 fix(wifi): add low memory options for eap enterprise 2024-02-01 10:05:06 +05:30
Brian Whitman
6319f9ab2c fix(rgb_lcd): don't assume 16 bit width on panels for restart logic 
Merges https://github.com/espressif/esp-idf/pull/13020
 2024-01-31 18:56:14 +08:00
Jan Beran
91b1a362ea feat: Use python-reorder-imports instead of isort 2024-01-31 09:27:47 +01:00
morris
dcf0d5b67c feat(rmt): added a help function for allocating encoder memory 
The encoder memory location should respect the RMT_MEM_ALLOC_CAPS,
which is affected by some Kconfig options, like ISR_IRAM_SAFE

Closes https://github.com/espressif/esp-idf/issues/13032
 2024-01-30 17:03:54 +08:00
xiongweichao
05d196938d fix(bt/bluedroid): Fixed SPP connection failure 
The connection failure is caused by the BTU and application layer status being out of sync.
 2024-01-30 15:42:39 +08:00
xiongweichao
2c9dccc64e fix(ble): Fixed macro definition error for 136K clock drift 2024-01-30 15:37:01 +08:00
xiongweichao
75dcda2750 fix(ble): Fixed Bluetooth not waking up due to clock drift 2024-01-30 15:36:53 +08:00
Sudeep Mohanty
300cd0c34f fix(lp_i2c): Fixed an issue where the LP_I2C IO lines were not in open-drain mode 
This commit fixes an issue where in the LP I2C IO lines were not
initialized in open-drain mode.

Closes https://github.com/espressif/esp-idf/issues/12969
 2024-01-29 09:48:39 +01:00
igor.udot
6cf7528125 ci: change known_failure_cases workflow 2024-01-29 16:26:28 +08:00
Jiang Jiang Jian
7cbee80fb9 Merge branch 'bugfix/fix_ble_tx_2m_problem_causing_by_phy_wifi_enable_set_v5.1' into 'release/v5.1' 
fix(esp_phy): Fixed BLE TX 2M problem causing by phy_wifi_enable_set() (backport v5.1)

See merge request espressif/esp-idf!28679
 2024-01-29 14:46:58 +08:00
Shu Chen
0b28bdb8f0 Merge branch 'backport/154_receive_handle_done_v5.1' into 'release/v5.1' 
Backport/154 receive handle done v5.1

See merge request espressif/esp-idf!28718
 2024-01-29 14:30:16 +08:00
Harshit Malpani
276ebe98a0
fix: fix esp_http_client_example build failure 
Fixed the build failure of esp_http_client_example for ESP32-C6 when
build with Wi-Fi enabled
 2024-01-29 11:36:26 +05:30
Harshit Malpani
3cfbbbd978
fix(esp_http_client): Fix http digest auth without qop 
Closes https://github.com/espressif/esp-idf/issues/12962
 2024-01-29 11:11:02 +05:30
morris
1daeac210b feat(rmt): support update bytes encoder configurations at runtime 
Closes https://github.com/espressif/esp-idf/issues/12775
 2024-01-29 13:28:53 +08:00
Gabor Kiss-Vamosi
4ef3261dd3 fix misformatted link 2024-01-29 13:16:01 +08:00