fix(riscv): Updated RISC-V functions to set interrupt threshold for CLIC targets
Closes IDFCI-2033, IDFCI-2034, IDF-8090, and IDF-8117
See merge request espressif/esp-idf!29055
This commit introduce SOC_MEM_NON_CONTIGUOUS_SRAM flag (that enebled for
esp32p4). If SOC_MEM_NON_CONTIGUOUS_SRAM is enabled:
- LDFLAGS+=--enable-non-contiguous-regions
- ldgen.py replaces "arrays[*]" from sections.ld.in with objects under
SURROUND keyword. (e.g. from linker.lf: data -> dram0_data SURROUND(foo))
- "mapping[*]" - refers to all other data
If SOC_MEM_NON_CONTIGUOUS_SRAM, sections.ld.in file should contain at
least one block of code like this (otherwise it does not make sense):
.dram0.bss (NOLOAD) :
{
arrays[dram0_bss]
mapping[dram0_bss]
} > sram_low
.dram1.bss (NOLOAD) :
{
/* do not place here arrays[dram0_bss] because it may be splited
* between segments */
mapping[dram0_bss]
} > sram_high
This commit added the RISC-V utility functions to set the interrupt
threshold for CLIC targets by using direct register value writes.
This makes the functions more efficient during run-time.
This is done to improve the critical section enter and exit performance on esp32p4.
This commit does the following:
- removes the xCoreID member from the TCB when building for single-core
- xCoreID is no longer hard set to 0 when calling "PinnedToCore" task creation
functions in single-core
- Tidy up or add missing xCoreID asserts for functions that take xCoreID as an
argument:
- Functions that set/query a variable of a particular core will call
taskVALID_CORE_ID() to ensure ) 0 <= xCoreID < configNUMBER_OF_CORES
- Task creation functions that accept xCoreID also call taskVALID_CORE_ID()
but also allow tskNO_AFFINITY.
- Fix TaskStatus_t
- Remove xCoreID from TaskStatus_t if configTASKLIST_INCLUDE_COREID is not
defined.
- Set xCoreID to 0 when calling vTaskGetInfo() in single-core builds
This commit mainly targets the ESP32-P4. It adds supports for coprocessors on
RISC-V based targets. The coprocessor save area, describing the used coprocessors
is stored at the end of the stack of each task (highest address) whereas each
coprocessor save area is allocated at the beginning of the task (lowest address).
The context of each coprocessor is saved lazily, by the task that want to use it.
Following the upgrade to FreeRTOS kernel v10.5.1, this commit updates the
version numbers, licenses, and SBOM files of FreeRTOS files to reflect v10.5.1.
Note:
- Updated licenses as v10.5.1 now uses SPDX format
- Removed CVE-2021-43997 as it was fixed post v10.4.5
This commit makes v10.5.1 the default FreeRTOS kernel in ESP-IDF by removing
the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option and v10.4.3 specific code
blocks.
This commit fixes an issue where xPortCanYield() function may not be
able to detect an ISR context when HW interrupt nesting is active on
a CLIC interrupt controller such as on esp32p4.
This commit adds beta support for the FreeRTOS v10.5.1 kernel which can be
enabled by enabling the CONFIG_FREERTOS_USE_KERNEL_10_5_1 option.
The following changes have been made:
- Updated freertos/CMakeLists.txt to build v10.5.1 kernel with v10.4.3. ports
- Updated existing Xtensa and RISC-V ports to work with V10.5.1
- Modifications to other ESP-IDF components to work with v10.5.1
- Added some ESP-IDF specific tracing changes to v10.5.1 kernel
- Make CONFIG_FREERTOS_USE_KERNEL_10_5_1 a public option
Note: The beta release is missing some minor fixes, performance improvements,
and features. Using this beta release for production is not recommended.
Closes https://github.com/espressif/esp-idf/issues/7137
This commit updates the xPortCanYield() for esp32p4 by correcting the
return condition. Previously, the API would return true if an ISR of
priority 1 was received which is incorrect.
Previously, TLSP deletion callbacks were...
- Stored in a seprate TCB member "pvThreadLocalStoragePointersDelCallback"
- Called separately via multipole prvDeleteTLS() insertions in tasks.c
This commit refactors how TLSP deletion callbacks are stored and called:
- TLSP deletion callbacks are now stored in "pvThreadLocalStoragePointers"
directly. configNUM_THREAD_LOCAL_STORAGE_POINTERS is doubled in size so that
the deletion callbacks are stored in the latter half of the array
- The callbacks are now called via "portCLEAN_UP_TCB()". As such, the
prvDeleteTLS() additions are no longer needed and the function can be removed
- Removed some legacy TLSP tests using the old method of storing the callback
pointers.
This commit reduces the source code diff between IDF FreeRTOS and upstream
vanilla FreeRTOS, in preparation for v10.5.1 upgrade.
Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
- add hardware stack guard based on assist-debug module
- enable hardware stack guard by default
- disable hardware stack guard for freertos ci.release test
- refactor rtos_int_enter/rtos_int_exit to change SP register inside them
- fix panic_reason.h header for RISC-V
- update docs to include information about the new feature
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
This commit refactors the pxPortInitialiseStack() function of the riscv
FreeRTOS ports (both IDF and SMP FreeRTOS).
- Each stack area is now separated into their own functions
- Each function will individually
- Push the stack pointer to allocate the stack area
- Initiaze the allocated stack area
- Each stack area's size and usage is now clearly documented in code
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
This commit fixes the function declaration naming from esprv_intc_set_threshold()
to esprv_intc_int_set_threshold(), thus allowing the underlying ROM funciton to be
exposed via the header.
This commit removes the riscv_interrupts.h header is it has become redundant. The previously
exposed API has been handled as follows:
- "riscv_interrupt_enable()" and "riscv_interrupt_disable()" have been removed. These functions
were declarations only and never had any implementation.
- "riscv_global_interrupts_enable()" and "riscv_global_interrupts_disable()" renamed to
"rv_utils_intr_global_enable()" and "rv_utils_intr_global_disable()" respectively and now
placed in rv_utils.h
This commit synchronizes multiple functions in tasks.c with upstream v10.4.3
that contain minor differences.
The following functions have had their parameter names or code formatting
updated:
- xTaskCreateStaticPinnedToCore()
- xTaskCreatePinnedToCore()
- prvInitialiseNewTask()
- prvTaskIsTaskSuspended()
- vTaskStartScheduler()
- xTaskResumeAll()
- xTaskCheckForTimeOut()
- uxTaskResetEventItemValue()
The following functions have had their missing "xAlreadyYielded" restored
- xTaskDelayUntil()
- vTaskDelay()
The following functions have had their critical section/interrupt disdable
usage update
- vTaskSuspendAll()
- xTaskGetTickCountFromISR()
- xTaskGetApplicationTaskTagFromISR()
