LWIP has two definess for setting max number of sntp servers:
- Total number of handled servers
- max number of sntp's picked via DHCP
by default both values are equal to 1, but could be set separately
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
This commit brings two esp-lwip fixes to IDF:
1) Add configuration to disable DHCP client identification
2195f7416f
This config could be used to disable option 61 in DHCP packets, so that
clients will be identified by their chaddr only.
(This is the lwip upstream original behaviour)
2) Fix server_idx increasing to DNS_MAX_SERVERS and trigger the LWIP_ASSERT
5a567d52f7
When lwip doesn't have DNS server and resolve a domain address, the server_idx
will increase to DNS_MAX_SERVERS, which will trigger the LWIP_ASSERT and make device crash.
Closes https://github.com/espressif/esp-idf/issues/6878
If silent assert configuration is enabled, LWIP asserts are now 'silent' also.
Also updates KConfig to note that LWIP asserts are also disabled when asserts
are disabled globally (this was already the behaviour, but the config item
suggested otherwise.)
Progress towards https://github.com/espressif/esp-idf/issues/5873
This caused some unsigned int prints out to be printed as singed integer which made the logs unreadable, for example sequence numbers in TCP packet headers
LWIP_HOOK_FILENAME is used in IDF to define standard and default hooks for IDF port in LWIP.
Added ESP_IDF_LWIP_HOOK_FILENAME to customize additional hooks in lwip
Closes https://github.com/espressif/esp-idf/issues/6261
Added lwIP hooks which could be optionally overwritten in the
application code. These three options are provided in Kconfig:
* NONE: No hook support
* DEFAULT: Default implementation is provided. If IDF doesn't
have a specific hook implementation, an empty stub is provided, which
could be overwritten by strong implementation in application code.
* CUSTOM: Hooks are declared only to be implemented in application code.
Merges https://github.com/espressif/esp-idf/pull/6034
* If CONFIG_VFS_SUPPORT_IO=y, keep everything as it is now
* If CONFIG_VFS_SUPPORT_IO=n, defined syscalls which LwIP can
implement, such as read/write/close
* Make LWIP-only select implementation dependent on
CONFIG_VFS_SUPPORT_SELECT, deprecate CONFIG_LWIP_USE_ONLY_LWIP_SELECT
Make the link local negotiation for IPV6 in PPP optional and
configurable.
This is because some modems do not support the IPV6 negotiation and
sending IPV6CP frames would in some cases break the network
configuration phase, resulting in a timeout during the Phase Network.
Please note that this does not disable the IPV6 support for the outgoing
communication (IPV6 is still enabled even if this option is not
selected) but just for the local link between lwIP and modem.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4782
Closes https://github.com/espressif/esp-idf/issues/1065
On startup of the common interface (ethernet, wifi), the lwip netif hostname was assigned to confg value .
Fixed to assign to esp-netif hostname if it exists
Closes https://github.com/espressif/esp-idf/issues/4737
SOMAXCONN is expected to be defined in this header, but for the esp32
port is found in net/if.h from newlib.
Avoid the issue by including the net/if.h header in sys/socket.h so that
compatibility is preserved.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4637
Some applications (i.e. Azure IoT SDK) are expecting this header to
exist and to contain the tcp constants and description.
The esp32 did not wrap the lwip/tcp.h header, thus this commit adds a
compatibility layer.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4637
esp_common/esp_compiler: renamed esp_macros file to a more specific one
esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate
components/freertos: placed likely macros around port and critical sections
component/freertos: placed likely macros on lists module
components/freertos: placed unlikely macros inside of assertion points, they likely wont fail
components/freertos: added likely macros on queue modules
FreeRTOS queues are one of most hot code path, because to queues itself tend to
be used a lot by the applications, besides that, queues are the basic primitive
to form both mutexes and semaphores, The focus here is to place likely
macros inside lowest level send and receive routines, since they're common
from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue)
components/lwip: placed likely/unlikey on net-interfaces code
components/fatfs: added unlikely macros on disk drivers code
components/spiffs: added unlikely macros on low level fs driver
components/freertos: added likely/unlikely macros on timers and ticker
freertos/event_group: placed likely/unlikely macros on hot event group code paths
components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc
components/bt: placed unlikely macros around bt HCI functions calling
components/lwip: added likely/unlikely macros on OS port code section
components/freertos: fix code style on tick handler
LwIP has support for IP_PKTINFO, but it cannot be activated as it is
not configurable. This fix adds in the ability to configure it.
Merges https://github.com/espressif/esp-idf/pull/3983
This MR removes the common dependency from every IDF components to the SOC component.
Currently, in the ``idf_functions.cmake`` script, we include the header path of SOC component by default for all components.
But for better code organization (or maybe also benifits to the compiling speed), we may remove the dependency to SOC components for most components except the driver and kernel related components.
In CMAKE, we have two kinds of header visibilities (set by include path visibility):
(Assume component A --(depends on)--> B, B is the current component)
1. public (``COMPONENT_ADD_INCLUDEDIRS``): means this path is visible to other depending components (A) (visible to A and B)
2. private (``COMPONENT_PRIV_INCLUDEDIRS``): means this path is only visible to source files inside the component (visible to B only)
and we have two kinds of depending ways:
(Assume component A --(depends on)--> B --(depends on)--> C, B is the current component)
1. public (```COMPONENT_REQUIRES```): means B can access to public include path of C. All other components rely on you (A) will also be available for the public headers. (visible to A, B)
2. private (``COMPONENT_PRIV_REQUIRES``): means B can access to public include path of C, but don't propagate this relation to other components (A). (visible to B)
1. remove the common requirement in ``idf_functions.cmake``, this makes the SOC components invisible to all other components by default.
2. if a component (for example, DRIVER) really needs the dependency to SOC, add a private dependency to SOC for it.
3. some other components that don't really depends on the SOC may still meet some errors saying "can't find header soc/...", this is because it's depended component (DRIVER) incorrectly include the header of SOC in its public headers. Moving all this kind of #include into source files, or private headers
4. Fix the include requirements for some file which miss sufficient #include directives. (Previously they include some headers by the long long long header include link)
This is a breaking change. Previous code may depends on the long include chain.
You may need to include the following headers for some files after this commit:
- soc/soc.h
- soc/soc_memory_layout.h
- driver/gpio.h
- esp_sleep.h
The major broken include chain includes:
1. esp_system.h no longer includes esp_sleep.h. The latter includes driver/gpio.h and driver/touch_pad.h.
2. ets_sys.h no longer includes soc/soc.h
3. freertos/portmacro.h no longer includes soc/soc_memory_layout.h
some peripheral headers no longer includes their hw related headers, e.g. rom/gpio.h no longer includes soc/gpio_pins.h and soc/gpio_reg.h
BREAKING CHANGE
