lly
1e29d86dd3
ble_mesh: Add net_buf_simple_init_with_data [Zephyr]
2020-06-01 13:57:41 +08:00
lly
8a8caebf51
ble_mesh: Optimize model recv operations [Zephyr]
...
Previously the model recv operation is a littl fuzzy.
With the changes, the model recv operation is splitted into:
- find op
- check app_idx
- check dst
- check length
- update info & handle message
2020-06-01 13:57:33 +08:00
lly
9aae4d3ba3
ble_mesh: Local model (un)subscribes group address
2020-05-29 09:40:19 +00:00
lly
2190c2c368
ble_mesh: Define a macro for invalid company id
2020-05-29 09:40:19 +00:00
Jiang Jiang Jian
8f2d1e7f92
Merge branch 'bugfix/collection_of_confirmed_fixes_from_baidu_project' into 'master'
...
Bugfix/collection of confirmed fixes from baidu project
Closes BT-826, BT-542, BCI-31, BCI-34, BT-840, and AUD-1857
See merge request espressif/esp-idf!8675
2020-05-28 12:23:58 +08:00
lly
6768c2b7a1
ble_mesh: Check the result of creating timer
2020-05-27 09:30:34 +00:00
Island
3b85d4ef24
Merge branch 'bugfix/ble_mesh_sync_zephyr_fixes' into 'master'
...
Bugfix/ble mesh sync zephyr fixes
Closes BLEMESH-215
See merge request espressif/esp-idf!8912
2020-05-27 17:26:00 +08:00
Island
d82f3372a0
Merge branch 'bugfix/ble_mesh_not_use_same_private_key' into 'master'
...
ble_mesh: Not using pre-initialized private key
Closes BLEMESH-214
See merge request espressif/esp-idf!8905
2020-05-27 17:25:39 +08:00
Island
02376b97d4
Merge branch 'bugfix/ble_mesh_uses_deprecated_config' into 'master'
...
ble_mesh: Fix using old config for duplicate scan
Closes BLEMESH-213
See merge request espressif/esp-idf!8898
2020-05-27 17:23:55 +08:00
Island
7b12d96169
Merge branch 'bugfix/ble_mesh_comp_data_store_restore' into 'master'
...
ble_mesh: Same func for storing/restoring comp data
See merge request espressif/esp-idf!8882
2020-05-27 17:23:21 +08:00
lly
0cfb6c138b
ble_mesh: Transport tx fields overflow [Zephyr]
...
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
2020-05-26 11:42:31 +08:00
lly
f863a1b328
ble_mesh: Friend with unknown appkey [Zephyr]
...
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
2020-05-26 11:16:01 +08:00
lly
05c287e05c
ble_mesh: Not using pre-initialized private key
2020-05-26 10:46:22 +08:00
lly
3c1487be0e
ble_mesh: Fix using old config for duplicate scan
2020-05-25 16:48:15 +08:00
Angus Gratton
084e170a8f
Merge branch 'refactor/esp_ipc' into 'master'
...
Split esp_ipc to a seaparate component
Closes IDF-1295
See merge request espressif/esp-idf!8520
2020-05-25 15:03:04 +08:00
lly
bbbdbb8699
ble_mesh: Same func for storing/restoring comp data
2020-05-25 13:27:08 +08:00
lly
af37aee5bf
ble_mesh: Fix Provisioner failed to publish
2020-05-22 15:32:12 +08:00
lly
b1f3843ed6
ble_mesh: Clear two more vars during proxy server deinit
2020-05-20 11:35:26 +00:00
lly
d5b126667a
ble_mesh: Add missing sdkconfig.h
2020-05-20 11:35:26 +00:00
lly
4e60919a66
ble_mesh: Init device name during proxy server init
...
Device name will be reset when deinit mesh stack. If not
initializing device name during the next mesh stack init,
it will fail to set the device name when using bluedroid.
2020-05-20 11:35:26 +00:00
lly
a0ce8c64b0
ble_mesh: Add init flag for friend init/deinit
...
Since bt_mesh_friend_init() will only be invoked when
a device is provisioned or Provisioner is enabled, so
we add a flag to indicate if the friend functionality
is initialized in case deinit before initialization.
2020-05-20 11:35:26 +00:00
Jiang Jiang Jian
05f4668ad0
Merge branch 'nimble/update_nimble_submodule' into 'master'
...
NimBLE: Include upstream fixes and use macros for log level filtering
See merge request espressif/esp-idf!8448
2020-05-20 11:23:46 +08:00
Darian Leung
11d96b39d0
esp_ipc: Move to new component
...
This commit moves esp_ipc into a separate component.
2020-05-18 16:51:45 +08:00
weitianhua
8fc05d0665
Fix ASSERT for RXDESC and save the log for debug
2020-05-18 06:51:51 +00:00
weitianhua
8d1032ccac
Fix ASSERT in ld_acl at line 302 forclkoff1 and localval
2020-05-18 06:51:51 +00:00
weitianhua
77cc105c72
Fix ld_acl schedule bug to parity shift
2020-05-18 06:51:51 +00:00
weitianhua
55877684a0
Fix ASSERT(64,0) in rwble.c
2020-05-18 06:51:51 +00:00
weitianhua
0811851378
Fix ASSERT in ld_pscan.c at line 1032
2020-05-18 06:51:51 +00:00
weitianhua
b20f254483
Free lmp tx buf in EM in the procedure of handling LMP_detach_Req when not received the last acknowledge from peer device and seperate them by ACL State
2020-05-18 06:51:51 +00:00
weitianhua
190ff3ae37
Fix that when slave initiate unsniff procedure and meet transaction collision, no mode change event is repoerted
2020-05-18 06:51:51 +00:00
weitianhua
70fa5b4ac5
Fix int_wdt due to disable interrupt too long time
2020-05-18 06:51:51 +00:00
weitianhua
c18ed5cbee
Fix Connection fail in loop
2020-05-18 06:51:51 +00:00
weitianhua
7aeb3d329a
Set AFH in BTDM Task when WiFi changes channel
2020-05-18 06:51:51 +00:00
weitianhua
e0e1154b62
Fix ASSERT(25,0) in lc_task.c
2020-05-18 06:51:51 +00:00
weitianhua
899e49b90e
Disable frequent warning log in ld_acl
2020-05-18 06:51:51 +00:00
weitianhua
b45f2d3913
Move default log level to WARNING instead ERROR in BT Controller
2020-05-18 06:51:51 +00:00
Jiang Jiang Jian
bef57a8ddc
Merge branch 'bugfix/V3.1.7_ble_bug_mr' into 'master'
...
component/bt: fix notify malloc failed , fix no BLE_AUTH_CMPL_EVT and fix bluedroid btc deinit crash
See merge request espressif/esp-idf!8729
2020-05-16 19:52:34 +08:00
zhiweijian
ec6c7558ef
add congest direct callback and fix malloc failed when multi_connection notify performance test
2020-05-15 15:35:39 +08:00
lly
25a6ea9600
ble_mesh: Remove patch for the bug of an App
2020-05-14 10:24:15 +08:00
Angus Gratton
6ccd7dbc59
Merge branch 'nimble/config_option_sdkconfig_rename' into 'master'
...
Add NimBLE config options in sdkconfig.rename
Closes IDF-1650
See merge request espressif/esp-idf!8653
2020-05-14 09:30:16 +08:00
wangcheng
418b32e71b
master missing BLE_AUTH_CMPL_EVT after restart
2020-05-13 20:33:24 +08:00
wangcheng
a5ac789725
fix bta_dm_deinit_cb crash
2020-05-13 20:18:27 +08:00
Island
c946ca8b45
Merge branch 'bugfix/ble_mesh_node_old_version_to_new' into 'master'
...
ble_mesh: Fix mesh node device role restore
Closes BLEMESH-188
See merge request espressif/esp-idf!8314
2020-05-12 20:36:55 +08:00
Island
1d22f17da3
Merge branch 'bugfix/ble_mesh_not_ignore_msg_in_fast_prov' into 'master'
...
ble_mesh: Not ignore msg when fast prov is enabled
Closes BLEMESH-196
See merge request espressif/esp-idf!8698
2020-05-12 20:36:41 +08:00
lly
f7ef701856
ble_mesh: Fix mesh node device role restore
...
Old version of BLE Mesh has no device role storage, because
previously we only support storing mesh node info.
If the binary of the node is upgraded from old version to a
new version (support storing provisioner info), the mesh info
of the node will not be restored because mesh role does not
exist in the flash.
2020-05-12 19:25:57 +08:00
lly
6b9c0dda08
ble_mesh: Fix typos
2020-05-12 16:23:13 +08:00
lly
d937b415e3
ble_mesh: Not ignore msg when fast prov is enabled
...
When fast provisioning is enabled, Provisioner shall not
ignore messages from the nodes whose addresses are not in
the provisioning database. Because other nodes which are
not provisioned by the Primary Provisioner will send node
address messages to the Primary Provisioner.
2020-05-12 11:22:07 +08:00
Prasad Alatkar
2ef489005b
NimBLE: Include upstream fixes and use macros for log level filtering
...
Change list:
- Reduces the size of the compiled binary, PR: https://github.com/espressif/esp-nimble/pull/6
- Null pointer check, PR: https://github.com/apache/mynewt-nimble/pull/701
- Pairing procedure abort on unexpected req: https://github.com/apache/mynewt-nimble/pull/710
- Fix conn flags after pairing: https://github.com/apache/mynewt-nimble/pull/730
- Remove notification for update process timeout (Vol 6, Part B, section 5.2 ):
https://github.com/apache/mynewt-nimble/pull/782
- CCCD fix : https://github.com/apache/mynewt-nimble/pull/790 and
https://github.com/apache/mynewt-nimble/pull/804
- Host based Privacy (RPA) fix: https://github.com/espressif/esp-nimble/pull/7
Closes https://github.com/espressif/esp-nimble/issues/10
Closes https://github.com/espressif/esp-idf/issues/4413
2020-05-11 05:36:50 +00:00
lly
c2fd80b8f4
ble_mesh: Fix not update prov addr in fast prov
...
When using fast provisioning, the Provisioner functionality
will be enabled. Unicast addresses within the pre-allocated
range will be used for provisioning nodes. And during the
address assignment, the allocated unicast address will be
checked that if it's duplicated with other nodes addresses
and the Provisioner's own addresses.
So before starting using fast provisioning, we need to update
the Provisioner address.
2020-05-11 02:29:18 +00:00
lly
97f11600e3
ble_mesh: net_key_status only pull one key idx [Zephyr]
...
Fixes bug where the config client's net_key_status handler would attempt
to pull two key indexes from a message which only holds one.
2020-05-11 02:29:18 +00:00