Commit Graph

22 Commits

Author SHA1 Message Date
Alexey Lapshin
89218b35e4 fix(system): place idf's stray sections while linking 2024-05-20 13:31:04 +04:00
nilesh.kale
59c5b5fe6b fix(bootloader): Fix compilation issue in bootloader build during verbose+sb+fe 2024-01-18 12:15:15 +05:30
Alexey Gerenkov
e9345bcced build: Adds support for Clangs's toolchain compiler-rt 2023-06-08 16:49:37 +03:00
KonstantinKondrashov
69838403f9 esp_bootloader_format: Adds bootloader description structure to read bootloader version from app
Closes https://github.com/espressif/esp-idf/issues/8800
Closes https://github.com/espressif/esp-idf/issues/9132
2023-05-10 21:39:52 +08:00
wuzhenghui
2ad49a9be5 update bootloader.ld rom_boot ram usage info 2022-07-29 10:51:47 +08:00
Omar Chebib
3c9856bdd1 (Xtensa) Build: add .xt.prop and .xt.lit to the compiled ELF file
Adding prop and lit sections to the ELF will let the debugger and the disassembler
have more info about data bytes present in the middle of the Xtensa
instructions, usually used for padding.
2022-07-05 04:39:29 +00:00
Alexey Lapshin
69b317368e esp_system: Fix esp32c2/esp32c3/esp32h2 TLS size
The change fixes thread-local-storage size by removing .srodata section
from it. It initially was included in TLS section by mistake.
The issue was found when stack size increased after building applications
with GCC-11.1 compiler. Stack size became bigger because some new data
appeared in .srodata. See more details here:
adce62f53d
2022-06-27 03:29:08 +00:00
Ivan Grokhotkov
8ee3decdba
bootloader, esp_system: increase static allocation space for esp32s3
The previously used splits between memory allocated for ROM code,
2nd stage bootloader and the app were somewhat safe and conservative.
This resulted in some space being unavailable for static allocation
in the app.

This commit increases the space available for static allocation to the
maximum possible amount.

1. Some of the ROM code static allocation is only used in UART/USB/SPI
   download modes. This region ("shared buffers") has been placed at
   the lower end of ROM memory area, to be reusable in flash boot
   mode. The 2nd stage bootloader linker script is modified to "pack"
   all sections exactly up to the end but with roughly 8K margin between
   startup stacks.
2. Instead of calculating the sections placement and hardcoding the
   addresses in the LD script again, rewrite it to calculate the
   start address of each memory region automatically based on the
   logic above.
3. Adjust the app memory layout (SRAM_IRAM_END) accordingly,
   increasing the space available for static allocation.

Overall these changes increase the space available for static
allocation by about 78kB.

The downside of these changes is that the 2nd stage bootloader .data
segment is now directly adjacent to the startup stack on the PRO CPU.
Previously, there was effectively about 78kB of extra stack space for
the PRO CPU, before the stack would run into the data segment.
2022-06-15 17:57:11 +05:30
Armando
c1cbd7bbf6 cache/mmu: implememnt cache and mmu hal APIs in bootloader 2022-03-11 22:43:11 +08:00
KonstantinKondrashov
9605f3eb1a soc: Adds efuse hal
Replaced eFuse ROM funcs with hal layer
2022-02-24 22:20:09 +08:00
Jakob Hasse
64a355eba8 feat (bootloader): added rng sampling
Set maximum RNG query frequency to save value known from tests
2021-12-27 13:59:20 +08:00
Sachin Parekh
bf1dde7233 bootloader: Enable clock glitch detection
Reset the device when clock glitch detected. Clock glitch detection is
only active in bootloader
2021-09-02 12:25:12 +05:30
KonstantinKondrashov
4ccb5515ef fpga/bootloader: Fix LoadProhibited error when bootloader_fill_random() is not in iram_loader_seg 2021-07-16 10:50:06 +10:00
Konstantin Kondrashov
f339b3fc96 efuse(esp32): Deprecate esp_efuse_burn_new_values() & esp_efuse_write_random_key()
These functions were used only for esp32 in secure_boot and flash encryption.
Use idf efuse APIs instead of efuse regs.
2021-06-17 07:21:36 +08:00
Marius Vikhammer
8ac74082f1 soc: add dummy bytes to ensure instr prefetch always valid
The CPU might prefetch instructions, which means it in some cases
will try to fetch instruction located after the last instruction in
flash.text.

Add dummy bytes to ensure fetching these wont result in an error,
 e.g. MMU exceptions
2021-03-29 13:50:03 +08:00
KonstantinKondrashov
95564b4687 secure_boot: Secure Boot V2 verify app signature on update (without Secure boot)
- ESP32 ECO3, ESP32-S2/C3/S3
2021-03-15 12:30:20 +00:00
Renz Bagaporo
6b0a5af73e soc: move implementations to esp_hw_support 2020-10-28 22:38:50 +08:00
morris
9de6cba434 ci: add more build test for esp32-s3 2020-10-27 17:22:17 +08:00
Angus Gratton
b35cb43caf bootloader_support: Add dummy ESP32-S3 RNG support 2020-10-16 18:48:26 +11:00
Michael (XIAO Xufeng)
953c046550 esp32s3/bootloader: extend IRAM usage to 0x6000
The bootloader cannot fit in the size of iram_loader_seg when built under -O0. Extend the IRAM size to fix this.
2020-10-09 17:50:17 +08:00
Ivan Grokhotkov
7a9d2c3fb4 bootloader: fix section placement of wdt_hal
Regression from moving HAL and LL code into the new "hal" component.
2020-09-03 18:14:17 +02:00
morris
3a8f5e45f0 bootloader: add linker script for esp32s3 2020-07-20 10:51:05 +08:00