Commit Graph

12 Commits

Author SHA1 Message Date
Ivan Grokhotkov
bc04b1f53b examples: don't enable buffering on stdout in console examples
newlib uses significantly more stack space when printing to an
unbuffered stream. To reduce the amount of stack space required to
use the console, don’t disable buffering. linenoise should support
unbuffered stdout instead.
2019-03-15 11:31:22 +08:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
morris
9163e454f1 example_test: using try block to pass the python style check 2018-11-30 10:13:58 +08:00
morris
2b165f99c4 i2c_tool: add i2c_tool example test
1. add example test for i2c-tools
2. make command line arguments number configurable
2018-11-30 10:08:28 +08:00
morris
6d1e23796f i2c/i2c-tools: add i2c-tools example
1. add command i2cconfig
2. add command i2cdetect
3. add command i2cget
4. add command i2cset
5. add command i2cdump
6. add README.md
2018-10-16 16:13:21 +08:00
morris
89d7f7bc89 doc/i2c-example: cleanup readme of i2c example
1. Update i2c README to add more detail according to the template.[TW#26530]
2. Move some specific configuration to KConfig
2018-10-12 10:24:39 +08:00
Renz Christian Bagaporo
d9939cedd9 cmake: make main a component again 2018-09-11 09:44:12 +08:00
Angus Gratton
800bffb8b0 cmake: Add CMakeLists.txt files for all examples
Generating using convert_to_cmake.py, with some minor cleanup
2018-04-30 09:59:20 +10:00
Roland Dobai
27a63c492f Examples: Demonstrate the usage of esp_err_to_name 2018-03-13 14:27:00 +01:00
Wangjialin
ed1e32f583 bugfix(i2c): add I2C hardware reset if the hw FSM get stuck
Reported from different sources from github or bbs:

https://github.com/espressif/esp-idf/issues/680

https://github.com/espressif/esp-idf/issues/922

We tested reading several sensor or other I2C slave devices, if the power and SDA/SCL wires are in proper condition, everything works find with reading the slave.
If we remove the power supply for the slave during I2C is reading, or directly connect SDA or SCL to ground, this would  cause the I2C FSM get stuck in wrong state, all we can do is the reset the I2C hardware in this case.
After this commit, no matter whether the power supply of I2C slave is removed or SDA / SCL are shorted to ground, the driver can recover from wrong state.

We are not sure whether this the save issue with the reported one yet, but to make the driver more robust.

Further information:

1. For I2C master mode, we have tested different situations, e.g., to short the SDA/SCL directly to GND/VCC, to short the SDA to SCL, to un-plug the slave device, to power off the slave device. Under all of those situations, this version of driver can recover and keep working.
2. Some slave device will die by accident and keep the SDA in low level, in this case, master should send several clock to make the slave release the bus.
3. Slave mode of ESP32 might also get in wrong state that held the SDA low, in this case, master device could send a stop signal to make esp32 slave release the bus.

Modifications:

1. Disable I2C_MASTER_TRAN_COMP interrupt to void extra interrupt.
2. Disable un-used timeout interrupt for slave.
3. Add bus reset if error detected for master mode.
4. Add bus clear if SDA level is low when error detected.
5. Modify the argument type of i2c_set_pin.
6. add API to set timeout value
7. add parameter check for timing APIs
2017-10-21 02:10:59 +08:00
Angus Gratton
821c70f5d7 examples: Standardise naming of files, symbols, etc. in examples
* Use "example" in all example function & variable names,
  ie use i2c_example_xxx instead of i2c_xxx for example functions.
  Closes #198 https://github.com/espressif/esp-idf/issues/198
* Mark example functions, etc. static
* Replace uses of "test" & "demo" with "example"
* Split the UART example into two
* Rename "main" example files to end with "_main.c" for disambiguation
2017-03-27 17:42:05 +11:00
Krzysztof Budzynski
382999b378 Moved examples to new folders / categories. Removed example numbers from example names 2017-01-16 23:08:35 +01:00