Commit Graph

158 Commits

Author SHA1 Message Date
Konstantin Kondrashov
32da455384 soc: Fix check_long_hold_gpio and move def to soc
Fix factory_reset_pin init as input
Move definition a structure rtc_gpio_desc to soc

Closes https://github.com/espressif/esp-idf/issues/2030
2018-06-22 09:20:27 +05:00
Ivan Grokhotkov
4b91c82cc4 Merge branch 'feat/sdio_pullup' into 'master'
feature(sdio): add features to make SDIO slave compatible with more devkits

See merge request idf/esp-idf!2454
2018-06-20 13:58:56 +08:00
michael
5b37a96ddc feature(sdio): allow to enable internal pullups of the SDIO host and slave as a debug feature
NOTE: the internal pullups are not totally reliable, please do add external pullups on your bus.
2018-06-14 12:04:22 +08:00
Michael (XIAO Xufeng)
ebfda40b7c refactor(spi): move pin information into soc folder 2018-06-14 11:29:15 +08:00
Michael (XIAO Xufeng)
939e5693a5 chore(spi): fix the terms of native to iomux 2018-06-06 06:08:39 +00:00
michael
5cf7d3768d feat(spi_master): fine tune the timing of SPI 2018-06-06 06:08:39 +00:00
Angus Gratton
3e1a93e5a7 soc: rtc_vddsdio_get_config() In default configuration, VDD_SDIO LDO is always enabled
When using bootstrapping pin to enable VDD_SDIO, the internal LDO is always enabled at either 1.8V
or 3.3V.
2018-05-25 15:14:13 +10:00
Angus Gratton
d775cc4c4c soc: Fix description of rtc_config_t.tieh, add macros
Usage of TIEH was correct but description had 1.8V & 3.3V backwards.

Add macro definitions for TIEH values to improve readability.
2018-05-25 14:58:37 +10:00
Angus Gratton
b8312a26c0 Merge branch 'feature/sdio_slave' into 'master'
feature(sdio_slave): add support for sdio_slave

See merge request idf/esp-idf!1829
2018-05-22 09:43:35 +08:00
Konstantin Kondrashov
e5b280f173 dport: Bigfix dport_read code move to IRAM
A new method of workaround an error with DPORT is to ensure that the APB is read and followed by the DPORT register without interruptions and pauses. This fix places this implementation in the IRAM to exclude errors associated with the cache miss.
2018-05-21 22:00:51 +05:00
Michael (XIAO Xufeng)
c73575de4f feat(sdio_slave): add headers for sdio slave components: slc, host, hinf 2018-05-21 23:48:33 +08:00
wangmengyang
22e21b38f7 component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
2018-05-19 15:37:26 +08:00
Angus Gratton
7ae1e9463e Merge branch 'bugfix/rtc_xtal_tests' into 'master'
ci: Only run XTAL unit tests assuming board has an XTAL

See merge request idf/esp-idf!2401
2018-05-15 18:44:46 +08:00
Angus Gratton
05e09a5bac ci: Only run XTAL unit tests assuming board has an XTAL, run less repeats 2018-05-15 15:43:24 +08:00
Angus Gratton
d1066e9d7f Merge branch 'feature/dport_access' into 'master'
soc: Dport access with pre-read register APB

See merge request idf/esp-idf!2257
2018-05-15 15:32:28 +08:00
Angus Gratton
662fe55996 Merge branch 'bugfix/select_rtc_slow_clk' into 'master'
esp32/clk: Fix starting rtc oscillator if it bad

See merge request idf/esp-idf!2215
2018-05-15 12:57:22 +08:00
Konstantin Kondrashov
9ad0760b9d esp32/clk:Fix starting rtc oscillator if it is bad
If the RTC crystal is bad or has no matched capacitance, then you do not need to start such the crystal. It is necessary to determine this case, output an error (about impossibility to start from the oscillator) and start from the internal RC of the chain.

Reduced the default value of the number of bootstrap cycles. Because we can oscillating the oscillator which then stops. (in Kconfig). Changed from 100 to 5.

The number of calibration cycles has been increased. It is the main criterion for estimating the launch of an oscillator. A large increase leads to an increase in the load time, as well as the stability of recognition of this case. (in Kconfig).
Changed from 1024 to 3000.
2018-05-15 08:59:15 +05:00
Konstantin Kondrashov
8f80cc733d soc: Change DPORT access
When two CPUs read the area of the DPORT and the area of the APB, the result is corrupted for the CPU that read the APB area.
And another CPU has valid data.

The method of eliminating this error.
Before reading the registers of the DPORT, make a preliminary reading of the APB register.
In this case, the joint access of the two CPUs to the registers of the APB and the DPORT is successful.
2018-05-14 17:54:57 +05:00
jack
c384fa2492 rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
2018-05-14 16:45:03 +08:00
Jiang Jiang Jian
db90f49758 Merge branch 'bugfix/update_emac_h' into 'master'
update emac_reg_v2.h

See merge request idf/esp-idf!2050
2018-05-07 16:16:52 +08:00
Ivan Grokhotkov
94250e42a0 sleep: optimize light sleep wakeup latency 2018-04-26 19:36:47 +08:00
Ivan Grokhotkov
ac623a9756 soc/rtc: restore dbg attenuation when waking from sleep
This fixes inability to enter deep sleep after waking up from light sleep
2018-04-26 18:52:46 +08:00
Ivan Grokhotkov
d38b22b11b soc/rtc, sleep: don’t lower the bias for wakeup state
This fixes watchdog resets occurring during wakeup from light sleep.
2018-04-26 18:52:45 +08:00
Ivan Grokhotkov
b0a91630fb soc/rtc: allow main XTAL to be powered on in sleep 2018-04-26 18:52:45 +08:00
Ivan Grokhotkov
3c78faa0a9 soc/rtc: don’t switch frequency in rtc_sleep_init 2018-04-26 18:52:45 +08:00
shangke
5fc130f2c0 update emac_reg_v2.h 2018-04-25 14:54:09 +08:00
Ivan Grokhotkov
52f9a5ca16 Merge branch 'bugfix/sdspi_wp_cd_pins' into 'master'
sdmmc, sdspi: fix handling of CD and WP

See merge request idf/esp-idf!2285
2018-04-24 20:53:47 +08:00
Ivan Grokhotkov
85ab4fc83e sdmmc host: add handling of CD and WP pins
Previous version of the code only connected CD and WP to the
peripheral, in fact the hardware does not use the values of these
signals automatically. This adds code to read CD and WP values when
command is executed and return errors if card is not present, or
write command is executed when WP signal is active.
2018-04-24 19:08:44 +08:00
Ivan Grokhotkov
9c7207ed3c Merge branch 'bugfix/soc_clk_out_fields' into 'master'
soc/io_mux: make CLK_OUT fields compatible with REG_SET/GET_FIELD

See merge request idf/esp-idf!2133
2018-04-13 19:42:20 +08:00
Ivan Grokhotkov
ee600784c5 sdmmc: add SDIO support
- Add SDIO support at protocol layer (probing, data transfer, interrupts)
- Add SDIO interrupts support in SDMMC host
- Add test (communicate with ESP32 in SDIO download mode)
2018-04-11 11:07:13 +08:00
Ivan Grokhotkov
2522c1b2f9 Merge branch 'bugfix/rtc_clk_fixes' into 'master'
Power management and RTC fixes

See merge request idf/esp-idf!2131
2018-04-10 18:17:02 +08:00
Angus Gratton
53234ef2bc Merge branch 'refactor/rtc_split_module' into 'master'
bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.

See merge request idf/esp-idf!1848
2018-04-04 09:00:58 +08:00
Angus Gratton
da27816314 Merge branch 'feat/add_efuse_cpu_freq_rating' into 'master'
efuse/add cpu freq rating

See merge request idf/esp-idf!1994
2018-03-29 05:59:52 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
Ivan Grokhotkov
b007b89b84 soc/io_mux: make CLK_OUT fields compatible with REG_SET/GET_FIELD 2018-03-27 12:10:18 +08:00
Ivan Grokhotkov
43b5fdd5c9 soc/rtc: fix switching between 80/160 and 240MHz
Previous code contained a check for PLL frequency to be 240MHz, while
in fact 240MHz was a CPU frequency; corresponding PLL frequency is
480MHz. Fixed the comparison and replaced integer MHz values with an
enum.
2018-03-27 10:55:59 +08:00
Ivan Grokhotkov
48d55e22e7 soc/rtc: run 32k XTAL startup test only in PSRAM config
PSRAM tests run on ESP-WROVER-KIT boards, which have the 32k XTAL
installed.
2018-03-26 10:14:13 +08:00
Ivan Grokhotkov
887b6e2925 Merge branch 'bugfix/rtc_clk_32k_bootstrap' into 'master'
bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC

See merge request idf/esp-idf!2085
2018-03-21 18:38:49 +08:00
Konstantin Kondrashov
f7df532ec0 bugfix/rtc_clk_32k_bootstrap: Fix starting 32k RTC
1. External 32kHz crystal is started for too long or it may not start at all. It is often observed at the first start.
2. At the first start, it is possible that the crystal did not start. And the recorded period was recorded as 0. Which led to a division error by zero during the transition to the deep sleep mode (Maybe somewhere else).
3. Added a unit test to test a new method of oscillation an external crystal.
4. Added a new method of oscillating of an external crystal. The legs of the crystal are fed with a 32 kHz frequency.

The new method eliminates these errors.

Added unit test: `\esp-idf\components\soc\esp32\test\test_rtc_clk.c`: `make TEST_COMPONENTS=soc`
- 8 Test starting external RTC crystal. Will pass.

`Bootstrap cycles for external 32kHz crystal` - is specified in the file Kconfig by default 100.

QA tested a new method of oscillation the crystal on 25 boards. The supply of square waves on the crystal showed a 100% result in contrast to the previous method of launching the crystal. After the tests, the old method was deleted.

Closes TW19143
2018-03-21 13:27:56 +05:00
Ivan Grokhotkov
1618dbc9a5 soc/rtc: wait for frequency switch to complete
The fast path of CPU frequency switch function, used in DFS, was not
waiting for the frequency switch to complete when switching from XTAL
to PLL. This resulted in incorrect reads from peripherals on APB,
where two consecutive reads could return the same value. For example,
in esp_timer, read of FRC_COUNT_REG would return same value as the
preceding read of FRC_ALARM_REG, causing time to jump by the value of
FRC_ALARM_REG / apb_freq_mhz.
2018-03-20 18:27:32 +08:00
Darian Leung
8b1277c55f efuse/add cpu freq rating
This commit adds support for CPU max freqeuency rating
bits in CPU. Bootloader will now print an error if attempting
to 160MHz rated ESP32 at 240MHz.

EFUSE_CHIP_VER_RESERVE has been replaced by the
frequency rating bits. Dependancies on EFUSE_CHIP_VER_RESERVE
have been changed to use EFUSE_CHIP_VER_PKG
2018-03-07 12:16:51 +08:00
Darian Leung
0c9e2c0fba esp_adc_cal/Remove lookup table
This commit removes the lookup table mode due to inferior performance when compared
to linear mode under attenuation 0, 1 and 2. However small portions of the lookup table
are kept for the higher voltages of atten 3 (above ADC reading 2880). That voltage range
in atten 3 has non linear characteristics making the LUT performan better than linear mode.
2018-02-22 20:01:41 +08:00
Darian Leung
73cdfbfe79 esp_adc_cal/Add eFuse functionality
This commit updates the esp_adc_cal ocmponent to support new calibration methods
which utilize calibratoin values stored in eFuse. This commit includes LUT mode
2018-02-13 21:22:48 +08:00
Ivan Grokhotkov
e381c6adde Merge branch 'bugfix/fix_i2s_adc_mode' into 'master'
driver(i2s): fix broken i2s adc mode

See merge request idf/esp-idf!1653
2018-02-11 12:58:58 +08:00
Wangjialin
451f69cc2e driver(i2s): fix broken i2s adc mode
1. Move i2s reset code from i2s_stop to i2s_start.
2. add RTC API to set sw mode for ADC
3. add description for adc_power_always_on()
4. add lock for i2s dma and RTC ADC functions.
5. add ADC read task in example

reported from bbs:  https://esp32.com/viewtopic.php?f=13&t=3490&p=17522#p17522
reported from github: https://github.com/espressif/esp-idf/issues/1333
2018-02-07 17:17:20 +08:00
Jeroen Domburg
70ab924dbb Especially when internal memory fills up, some FreeRTOS structures (queues etc) get allocated in psram. These structures also contain a spinlock, which needs an atomic-compare-swap operation to work. The psram hardware, however, does not support this operation. As a workaround, this patch detects these spinlocks and will, instead of S32C1I, use equivalent C-code to simulate the behaviour, with an (internal) mux for atomicity. 2018-02-02 17:11:06 +08:00
Angus Gratton
4297c337f9 esp32: Add IO_MUX_GPIOxx register names to match iomux names used in TRM
The TRM describes IOMUX registers are IO_MUX_x_REG for x in GPIO0-39.

Until now ESP-IDF describes them as PERIPHS_IO_MUX_(pinname)_U

This commit adds additional IOMUX register names which match the ones used in the TRM.
2018-01-30 17:09:37 +08:00
Ivan Grokhotkov
ffaf145056 Merge branch 'bugfix/xtal_freq_estimation' into 'master'
soc/rtc_clk: fix loss of precision in estimation of XTAL frequency

See merge request !1763
2018-01-23 15:37:47 +08:00
kooho
492db0591d Fix uart fifo overflow bug 2018-01-12 14:42:54 +08:00
Ivan Grokhotkov
914ab07567 Merge branch 'feature/ulp_i2c_reg' into 'master'
soc,ulp: add register definitions of RTC_I2C peripheral

See merge request !1762
2018-01-11 12:08:25 +08:00