Commit Graph

22 Commits

Author SHA1 Message Date
Ivan Grokhotkov
15a6145961 Merge branch 'feature/get_chip_ver' into 'master'
add API to get chip info

This change adds an API to get chip info, such as chip model, enabled capabilities, size of embedded flash, silicon revision.

Hello_world example is modified to print out the information about the chip. The example is also simplified by moving all code into the main task.

Ref TW12031.

See merge request !549
2017-05-11 12:05:55 +08:00
Ivan Grokhotkov
c742f7d860 Merge branch 'feature/base_mac_address' into 'master'
Optimize configuration of base MAC address

Application developer can call APIs to configure base MAC address
instead of using menuconfig.

See merge request !744
2017-05-11 12:01:51 +08:00
XiaXiaotian
b22067a8f0 Optimize configuration of base MAC address
Application developer can call APIs to configure base MAC address
    instead of using menuconfig.
2017-05-10 10:15:07 +08:00
Tian Hao
26a3cb93c7 component/soc : move dport access header files to soc
1. move dport access header files to soc
2. reduce dport register write protection. Only protect read operation
2017-05-09 18:06:00 +08:00
Tian Hao
f7e8856520 component/esp32 : fix dualcore bug
1. When dual core cpu run access DPORT register, must do protection.
2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro.
2017-05-08 21:53:43 +08:00
Ivan Grokhotkov
2260c714e7 add esp_chip_info API 2017-05-05 17:28:30 +08:00
XiaXiaotian
5553fbd537 add base MAC address storage choice.
Base MAC address can be stored in default manufacture-defined or customer
    pre-defined place in EFUSE and other place e.g. flash or EEPROM.
    If choose to use base MAC address which is stored in other place, please
    call esp_base_mac_addr_set_external() before initializing WiFi/BT/Ehternet.
2017-04-21 14:55:11 +08:00
XiaXiaotian
03e2618d35 Add customer MAC address that read from efuse 2017-04-17 21:24:15 +08:00
Ivan Grokhotkov
7ee8ee8b7e soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
Jiang Jiang Jian
3b8c9a407f Merge branch 'feature/add_user_set_mac' into 'master'
Feature/add user set mac

1. Add menuconfig for user to set mac address of wifi, bt and ethernet.
2. Add the number of MAC address generated from efuse for user to choose.
3. Add MAC address derive method.

See merge request !542
2017-03-02 17:34:14 +08:00
XiaXiaotian
d3eede2110 mac address: add the number of MAC address generated from efuse for user to choose
1. Add the number of MAC address generated from efuse for user to choose.

2. Add MAC address derive method.
2017-03-02 15:54:35 +08:00
XiaXiaotian
fabe0493c2 mac address: add user set mac address
add menuconfig for user to set mac address of wifi, bt and ethernet.
2017-03-01 20:51:49 +08:00
Angus Gratton
98f8594151 esp32 dport_reg.h: Fix typo in register bit names 2017-03-01 12:01:07 +11:00
Wu Jian Gang
f4d5d151aa esp32: add get idf version api 2017-01-17 16:52:42 +08:00
Ivan Grokhotkov
6538252552 Merge branch 'bugfix/panic_reset_hangs' into 'master'
Panic handler: Use same reset path as esp_restart(), disabling hardware

Closes #223 https://github.com/espressif/esp-idf/issues/223

See merge request !417
2017-01-16 10:40:47 +08:00
Angus Gratton
ea19838d3a Build: Handle WiFi & BT enabled/disabled combos gracefully as possible
If using WIFI_INIT_CONFIG_DEFAULT, error message will point out lack
of WiFi. Otherwise linker errors on WiFi symbols should help give a
clue as to what is broken.

Piggy-backs on changes in !420, ref github #230 #237
2017-01-16 13:03:17 +11:00
Angus Gratton
e53d307814 Panic handler: Use same reset path as esp_restart(), disabling hardware
Closes #223 https://github.com/espressif/esp-idf/issues/223
2017-01-13 14:37:36 +11:00
shangke
0e701e1cac ethernet: support flow control 2017-01-10 15:19:18 +08:00
Angus Gratton
2e3ca1c2f7 bootloader: Boost bootloader CPU to 80MHz
Partially needed to use RNG, also useful to improve boot performance.
2017-01-04 16:07:19 +11:00
Ivan Grokhotkov
b57aecdfe9 uart_tx_wait_idle: fix issue with last character not transmitted
- ROM function uart_tx_wait_idle may have a bug which causes the function to return before the final character is fully transmitted.
  This replaces uart_tx_wait_idle declaration with a static inline definition which fixes the issue.
- Also replaces the use of uart_tx_flush with uart_tx_wait_idle in esp_restart, to remove garbage in console output on restart.
- rtc_printf is temporary replaced with a no-op, pending a new release of librtc.a. Current release assumes that UART0 is used for output,
  and switches UART0 baud rate while doing frequency changes and printing some log output. This doesn’t work if a different UART is used for output.
2016-12-08 01:42:37 +08:00
Ivan Grokhotkov
df6edb50e9 implement esp_deep_sleep, fix build issues 2016-11-22 21:54:49 +08:00
Ivan Grokhotkov
8b2f933a51 Implement system_* APIs in IDF 2016-11-22 21:14:36 +08:00