Commit Graph

16 Commits

Author SHA1 Message Date
Darian Leung
2bb30e6493 refactor(usb): Deprecate CONFIG_USB_OTG_SUPPORTED, use SOC_USB_OTG_SUPPORTED instead
Previously, USB build dependencies used the CONFIG_USB_OTG_SUPPORTED. However,
they could depend on `soc_caps.h` instead.
2024-01-01 21:37:34 +08:00
chenjianxing
97cfa54e77 esp_phy: update esp32c2 phy lib to fix some issues
1. improve Wi-Fi rx 11b pkts for AC-DC power supply modules.
2. fix Wi-Fi disconnect in low temperature.
3. fix RTC_SW_CPU_RST occur in Wi-Fi start and stop process.
2023-06-12 11:45:48 +08:00
muhaidong
f1cec643a7 esp_phy: add menuconfig of phy calibration mode 2023-03-20 11:16:37 +08:00
muhaidong
7207194442 disable reduce PHY TX power when brownout reset 2023-03-20 11:10:32 +08:00
Ivan Grokhotkov
e0009e6d9e Specification Kconfig description 2023-03-08 11:01:49 +08:00
xiehang
9c8b7fc0dd esp_phy: Update esp32c3/s3 phy lib and add test lib 2023-03-08 11:01:31 +08:00
Li Shuai
200f69e6eb auto beacon: support esp32c6 autobeacon (advanced DTIM sleep feature)
modem retention: Support esp32c6 wifi MAC and baseband sleep retention

sleep_modem: wifi MAC modem wakeup protect in modem state before PMU trigger sleep enable request

sleep modem: provide a interface to get whether the Modem power domain is allowed to power off during sleep

add i2c_ana master header file to project

auto beacon: release PMU's lock on root clock source (it is locked in the PLL)

wifi receiving beacon frame in PMU modem state strongly depends on the BBPLL
clock, PMU will forcibly lock the root clock source as PLL, when the root
clock source of the software system is selected as PLL, we need to release
the root clock source locking.

When it is judged that the PLL is locked by PMU after wakeing up from the PMU
modem state, switch the root clock source to the PLL in the sleep process (a
critical section).

auto beacon: fix the failure to receive broadcast/multicast frames in modem state

When the multicast field in the beacon frame received in the PMU modem state is
True, the PMU switches to the PMU active state (the PMU waits for the HP LDO to
stabilize and then restores the MAC context) and starts to receive
broadcast/multicast frames (Broadcast/Multicast frames will be sent after a
minimum delay of 48 us after the beacon frame), because the PMU waits for the HP
LDO to stabilize too long (~154 us), which will cause broadcast/multicast frame
reception to be missed.

auto beacon: select the PLL clock source as the REGDMA backup clock source when the PMU switches to ACTIVE from MODEM state

update Digital Peripheral (M2A switch) REGDMA restore time parameter

auto beacon: fix the issue that only channel 1 can connect to AP in modem state
2023-03-04 00:17:40 +08:00
zhangwenxu
2816ff14e4 ieee802154: add support for esp32h2 2023-02-27 15:32:32 +08:00
Marius Vikhammer
bb88338118 system: move kconfig options out of target component
Moved the following kconfig options out of the target component:
 * ESP32_X_BROWNOUT_* -> esp_system
 * ESP32_X_DEBUG_OCDAWARE -> esp_system
 * APP_NO_BLOBS -> build type (main kconfig)
2022-03-02 01:22:26 +00:00
Cao Sen Miao
f82ab4c757 usb_serial_jtag: can print when wifi enabled by default
Closes https://github.com/espressif/esp-idf/issues/8131
2021-12-27 14:52:07 +08:00
chenjianxing
65f3bf4a8a esp_phy: fix esp32s3 phy work with USB-OTG issue 2021-11-17 11:08:01 +08:00
chenjianxing
5918bb73d9 esp_phy: fix esp32c3/s3 phy USB & RSSI issue 2021-10-26 15:22:01 +08:00
chenjianxing
2a09234957 esp_phy: rename esp_phy component prefix 2021-10-13 13:10:49 +08:00
chenjianxing
09a034d61b esp_wifi: support multi phy init data bin embedded 2021-10-13 13:10:47 +08:00
Li Shuai
d73a09cd8b light sleep: add wifi mac sleep support for esp32s3 2021-08-04 21:58:33 +08:00
Shu Chen
6061a547e5 esp_phy: decouple esp_phy component from esp_wifi and bt
* add esp-phy-lib submodule
* move libphy.a and phy_init.c from esp_wifi to esp_phy
* move librtc.a from esp_wifi to esp_phy
* move libbtbb.a from bt to esp_phy
* corresponding updates to build system
2021-06-03 16:17:31 +08:00