alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
34,475 Commits 20 Branches 148 Tags 384 MiB
0a13c60466
Commit Graph

32 Commits

Author SHA1 Message Date
Darian Leung
f0219b73f9
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names 
Note: Also fixed some formatting issues in usb_wrap_struct.h
 2024-02-19 15:45:02 +08:00
Darian Leung
f2ede42191
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy 
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
 2024-02-19 15:45:01 +08:00
Song Ruo Jing
55ed548cc6 fix(console): enable to select UART1 port for console output 
This feature was only enabled for esp32, esp32s2, esp32s3 previously.
Now, enabling this feature for all targets.
 2023-11-30 11:26:09 +08:00
wuzhenghui
b7f1aa5292 fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad 2023-11-16 17:18:43 +08:00
Ivan Grokhotkov
8fe15a26d5
fix(console): switch USB PHY to OTG when OTG is used for console 
On ESP32-S3 with the default efuse settings, USB PHY is connected to
the USB_SERIAL_JTAG peripheral. If USB OTG peripheral is used for the
console, we need to additionally switch the PHY to USB OTG, otherwise
we won't get any output.

Closes https://github.com/espressif/esp-idf/issues/12437
 2023-11-14 14:19:14 +01:00
gaoxu
4541ad134d feat(uart): add RCC atomic block to uart/lp-uart peripheral 2023-10-08 10:10:02 +08:00
Ivan Grokhotkov
74fa41f434
esp_rom: add USB_OTG "port" number for S2 and S3 2023-04-12 11:08:42 +02:00
morris
b7799ec84d rom: patch uart function to switch buffer 2023-01-31 13:11:32 +08:00
jiangguangming
8f807d8964 bootloader_support: fix uart1 no printing in the 2nd bootloader stage 2022-11-10 16:24:26 +08:00
laokaiyao
8677216576 esp32h2: renaming esp32h2 to esp32h4 2022-11-08 17:05:33 +08:00
jiangguangming
8774db59f0 esp_rom: remove ESP_ROM_SUPPORT_MULTIPLE_UART 2022-10-14 14:06:40 +08:00
jiangguangming
4c3ce9f21d esp_rom: fix esp32s3 rom ets_printf bug 2022-10-14 11:43:46 +08:00
wuzhenghui
1c820b0a6d esp32c6: add bootloader support 2022-09-26 20:24:52 +08:00
songruojing
b3d8db3ae2 bootloader, esp_system: esp32c2 console uart to support 26MHz xtal 
Gets the XTAL frequency from the RTC storage register, remove UART_CLK_FREQ_ROM macro from soc.h
 2022-07-11 12:24:58 +08:00
Marius Vikhammer
ca3c056ac9 kconfig: replace deprecated options with new values 2022-03-15 16:28:53 +08:00
Michael (XIAO Xufeng)
395cd494f8 bootloader: fixed the issue custom_uart_gpio doesn't take effect 2022-03-01 17:54:34 +08:00
laokaiyao
cf049e15ed esp8684: rename target to esp32c2 2022-01-19 11:08:57 +08:00
Cao Sen Miao
bf6fa70812 ESP8684: update bootloader, bootloader_support, esp_rom 2021-11-06 17:33:44 +08:00
Omar Chebib
779e7400b0 uart: uart_set_pin function will now use IOMUX whenever possible 
By using IOMUX instead of GPIO Matrix for UART, it is now possible
on ESP32 boards to use the UART as a wake up source even if it is
not used as a console.
For other boards where this issue was not present, using IOMUX has
the advantage to be faster than using GPIO matrix, so a highest
baudrate can be used
 2021-08-04 12:48:30 +08:00
Shu Chen
c0056813f2 esp32h2: add bootloader support 2021-07-01 19:53:11 +08:00
Cao Sen Miao
f2fe0847d5 usb_serial_jtag: add initial support for S3 (including flashing, monitoring, writing, and reading) but console is not avaliable now 2021-06-18 12:42:41 +08:00
Jan Brudný
dffe49f305 bootloader: update copyright notice 2021-06-02 14:22:09 +02:00
Cao Sen Miao
8c5819dccb usb_serial_jtag: fix the bug that cannot write with usb_jtag 2021-05-13 13:40:01 +08:00
Jeroen Domburg
2c75f63f89 * ets_delay_us(1) has too much overhead; change logic 
* Fix MR comments
 2021-04-28 16:38:24 +08:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3 
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
 2021-04-08 14:01:18 +08:00
Marius Vikhammer
4ff8c7ae98 esp_rom/esp_system: Add flag for ROM multiple UART output, esp32c3 console 
From internal commit 6d894813
 2020-12-24 14:18:01 +11:00
morris
3f287800eb bootloader_support: added esp32-c3 support 2020-12-11 11:45:10 +08:00
morris
6225932201 bootloader_support: add esp32-s3 initial support 2020-09-22 15:15:03 +08:00
morris
2917651478 esp_rom: extract common ets apis into esp_rom_sys.h 2020-07-27 15:27:01 +08:00
morris
345606e7f3 esp_rom: extract common uart apis into esp_rom_uart.h 2020-07-17 16:00:59 +08:00
morris
a4d0033c03 esp_rom: extract common GPIO apis into esp_rom_gpio.h 2020-07-07 11:40:19 +08:00
Ivan Grokhotkov
5ee75165f2 esp_common: add "USB CDC" option for console output 2020-06-26 15:38:49 +02:00