Mahavir Jain
426f03de5f
Merge branch 'fix/prov_ble_read_offset_v4.0' into 'release/v4.0'
...
BLE provisioning: Add check for valid ble read offset (v4.0)
See merge request espressif/esp-idf!9746
2020-07-30 16:11:21 +08:00
Mahavir Jain
d3034e8172
Merge branch 'bugfix/convert-string-to-bytes_v4.0' into 'release/v4.0'
...
components: convert string to bytes to fix TypeError (backport v4.0)
See merge request espressif/esp-idf!9732
2020-07-30 16:11:02 +08:00
Michael (XIAO Xufeng)
fcb0206c59
Merge branch 'bugfix/mcpwm_fault_init_copypaste_typo_bp4.0' into 'release/v4.0'
...
MCPWM: Fix PWM-fault init function that read config incorrectly (backport v4.0)
See merge request espressif/esp-idf!9552
2020-07-30 15:55:11 +08:00
Angus Gratton
0dc46879c5
Merge branch 'bugfix/esp_flash_write_performance_regression_4.0' into 'release/v4.0'
...
esp_flash: fix the write performance regression (Backport v4.0)
See merge request espressif/esp-idf!9616
2020-07-29 15:30:13 +08:00
ronghulin
4e7d7426aa
bugfix: fix softap mode wpa memory leak
2020-07-29 14:17:12 +08:00
Michael (XIAO Xufeng)
818a2f8768
ci: resume esp_flash unit tests
2020-07-29 10:00:23 +08:00
Michael (XIAO Xufeng)
7dfb6adf27
sdmmc: fix the probe issue that forbid sdspi working in highspeed mode
...
SD cards don't support CMD7 (select_card) in SPI mode. Highspeed probe
of sdspi will fail in this step and stop working in highspeed mode.
Remove the CMD7 in enable_hs_mode_and_check to fix this issue.
Please note that, on ESP32, you have to use the IOMUX pins to use sdspi
in 40MHz, otherwise the initialization process will report reading issue
and fail.
2020-07-28 12:19:51 +08:00
yiying
9c82e7c875
docs: add a note about ESP-IDF FreeRTOS version
2020-07-27 20:24:43 +08:00
Chinmay Chhajed
5fe10f1ff8
Bluedroid: Fixes cases having fallback to link up event.
...
Signed-off-by: Chinmay Chhajed <chinmay.chhajed@espressif.com>
2020-07-27 14:03:20 +05:30
wangcheng
ebacef4304
component/bt: add connect parameter, fix instant reverse, fix tx default octets, fix assert(1024,0), fix assert(512,0)
2020-07-24 12:05:29 +08:00
Prasad Alatkar
9566e4ec19
NimBLE: Add Non-Resolvable private address support and misc bug fixes (Backport v4.0)
...
- Merges https://github.com/espressif/esp-nimble/pull/12
- Fixes repeated pairing failure in RPA feature
Closes https://github.com/espressif/esp-idf/issues/5530
2020-07-23 11:31:52 +05:30
Angus Gratton
7abb8e7fc3
Merge branch 'docs/doc138_backport_v4.0' into 'release/v4.0'
...
Fix incorrect redirect link in getting started guide (backport v4.0)
See merge request espressif/esp-idf!9704
2020-07-23 13:24:20 +08:00
Angus Gratton
8cfc9f1609
Merge branch 'bugfix/prov_retry_failures_v4.0' into 'release/v4.0'
...
ci: Add retries for all provisioning methods, some refactors (v4.0)
See merge request espressif/esp-idf!9389
2020-07-23 13:17:21 +08:00
Jiang Jiang Jian
e5526e2953
Merge branch 'bugfix/wpa3_to_wpa2_transition_fix_v4.0' into 'release/v4.0'
...
Fix WPA3 and WPA2 transition related failures (Backport v4.0)
See merge request espressif/esp-idf!9534
2020-07-23 09:52:46 +08:00
Prasad Alatkar
8b5fb43d93
BLE provisioning: Add check for valid ble read offset
2020-07-22 19:42:09 +05:30
Angus Gratton
3b0a62a752
Merge branch 'ci/test_spi_speed_psram_enabled_4.0' into 'release/v4.0'
...
driver test: disable the spi master performance test when psram is used (v4.0)
See merge request espressif/esp-idf!9637
2020-07-22 17:28:24 +08:00
yiying
61bc60213e
docs: change redirection link in get-started
...
This link is supposed to go to Step 3, but it goes to Step 2.
2020-07-22 17:17:38 +08:00
martin.gano
2595326978
components: convert string to bytes to fix TypeError There is a string passed as an argument for function, but a format of a string seemingly refers to bytes therefore it needs to be converted to bytes Solves https://esp32.com/viewtopic.php?f=13&t=16529
...
(cherry picked from commit cb0bdb8bba
)
2020-07-22 11:04:22 +02:00
Jiang Jiang Jian
53605395cf
Merge branch 'bugfix/collection_of_confirmed_fixes_from_baidu_project_4.0' into 'release/v4.0'
...
Backport MR for baidu project for release/v4.0
See merge request espressif/esp-idf!8989
2020-07-22 16:34:19 +08:00
Angus Gratton
b994331b83
Merge branch 'ci/workaround_multiple_ci_failures_v4.0' into 'release/v4.0'
...
CI: workaround multiple ci failures (v4.0)
See merge request espressif/esp-idf!9686
2020-07-22 11:55:24 +08:00
Michael (XIAO Xufeng)
69059ea2cc
driver test: disable the spi master performance test when psram is used
2020-07-21 05:43:45 +00:00
Renz Christian Bagaporo
34f4b5a4d3
ci: pushd and cd in one go in idf_build_process defaults test
2020-07-20 18:24:05 +08:00
Renz Bagaporo
d30f3b6edd
cmake: fix setting defaults in idf_build_process
...
Closes https://github.com/espressif/esp-idf/issues/5053
2020-07-20 18:24:05 +08:00
Renz Bagaporo
948795265d
ci: test idf_build_process defaults set properly
2020-07-20 18:24:02 +08:00
He Yin Ling
ce88e9d3fe
CI: do not run cases likely to fail
2020-07-19 14:58:28 +08:00
He Yin Ling
83895b4e78
CI: disable cases with test env SSC_T5_1
2020-07-19 14:58:28 +08:00
He Yin Ling
53852b555e
CI: temp allow mesh job to fail as runner is not stable
2020-07-19 14:58:27 +08:00
He Yin Ling
087a1e339e
CI: remove incorrect MTU related cases
2020-07-19 14:58:27 +08:00
Island
712aa3daa7
Merge branch 'bugfix/ble_mesh_health_current_status_recv_v4.0' into 'release/v4.0'
...
ble_mesh: stack: Fix recv health current status incorrectly (v4.0)
See merge request espressif/esp-idf!9665
2020-07-17 16:14:44 +08:00
boblane
9a88eef632
fix esp_bt_gap_get_bond_device_list bug
...
Closes https://github.com/espressif/esp-idf/issues/5395
2020-07-17 15:12:57 +08:00
lly
beda5f0fd4
ble_mesh: stack: Fix recv health current status incorrectly
2020-07-17 14:06:41 +08:00
DerfJagged
a1cf4fa871
Support for more Bluetooth HID devices
...
Some Bluetooth devices - such as an Xbox One S controller (model 1708) - report more than two external features pages and are rejected immediately. Pages 1 and 2 are marked as unhandled in btm_devctl.c anyway, so there is no reason to block devices with more pages.
(IDFGH-3515)
Signed-off-by: liqigan <liqigan@espressif.com>
Merges https://github.com/espressif/esp-idf/pull/5481
Closes https://github.com/espressif/esp-idf/issues/5470
2020-07-17 10:23:52 +08:00
Angus Gratton
bf1394eeb8
Merge branch 'feature/toolchain_2020r2_v4.0' into 'release/v4.0'
...
Update toolchain to esp-2020r2 (backport v4.0)
See merge request espressif/esp-idf!9001
2020-07-16 16:22:17 +08:00
Island
0dc0c54acd
Merge branch 'bugfix/ble_mesh_misc_updates_v4.0' into 'release/v4.0'
...
Bugfix/ble mesh misc updates (v4.0)
See merge request espressif/esp-idf!9642
2020-07-16 14:03:15 +08:00
lly
235cdd2ff0
ble_mesh: ci: Enable friend & low power in build check
2020-07-16 11:04:58 +08:00
lly
f3566fd2af
ble_mesh: stack: Only keep func pointer for very common log
...
Currently only keep func pointer for the followings:
- Invalid parameter (mesh btc & mesh stack)
- Out of memory (mesh btc & mesh stack)
- Unknown act (mesh btc)
- Invalid model user data (mesh stack)
- BT_DBG("%s", __func__) (mesh btc & mesh stack)
- A few other specific situations (buf ref debug, send status check)
2020-07-16 11:04:57 +08:00
lly
f10c62d84d
ble_mesh: stack: Make proxy server & client functions clear
2020-07-16 11:04:57 +08:00
Island
775fd14310
Merge branch 'bugfix/ble_mesh_add_misc_check_v4.0' into 'release/v4.0'
...
Bugfix/ble mesh add misc check (v4.0)
See merge request espressif/esp-idf!9631
2020-07-16 10:51:49 +08:00
Nachiket Kukade
e9a07592fc
wpa_supplicant: Fix WPA3 and WPA2 transition related failures
...
1. If Device is connected to AP in WPA3-PSK mode, AP switching
security to WPA2-PSK causes connection failures even after reset.
Fix is to not store WPA3's PMK in NVS for caching.
2. AP switching back to WPA3 causes even more connection failures.
This is due to device not clearing Supplicant level PMK Cache when
it is no longer valid. Fix is to clear the Cache when 4-way handshake
fails and to check Key Mgmt of Cache before using.
3. When AP switches from WPA3 to WPA2, device's PMF config in
Supplicant remains enabled. This may cause failures during
4-way handshake. So clear PMF config in when PMF is no longer used.
2020-07-15 13:40:03 +00:00
Ivan Grokhotkov
48ea44f3d1
Merge branch 'feature/light_sleep_reject_v4.0' into 'release/v4.0'
...
sleep: enable sleep reject when entering light sleep (v4.0)
See merge request espressif/esp-idf!9501
2020-07-15 20:08:55 +08:00
Anton Maklakov
009492ca9a
Merge branch 'bugfix/fix_static_analysis_rules_v4.0' into 'release/v4.0'
...
static analysis: Apply current limits of known defects (v4.0)
See merge request espressif/esp-idf!9277
2020-07-15 16:56:22 +08:00
David Čermák
e4501dc0ec
Merge branch 'bugfix/ws_send_abort_v4.0' into 'release/v4.0'
...
websocket client: the client now aborts the connection if send fails. (v4.0)
See merge request espressif/esp-idf!9171
2020-07-15 16:38:05 +08:00
lly
1df9502301
ble_mesh: stack: Add proxy cfg pdu length check
2020-07-15 16:11:32 +08:00
lly
d04a8da916
ble_mesh: stack: Rework using dev flag to check scan status
...
Different bluetooth host has different behaviors, so it's better
to maintain a scan check mechanism of BLE Mesh itself.
Fixes an issue when only PB-GATT is enabled for node, which will
output a scan error log when the device is provisioned.
2020-07-15 16:11:31 +08:00
lly
6e79097b4a
ble_mesh: example: Add result check during mesh init
2020-07-15 16:11:29 +08:00
lly
c8601fface
ble_mesh: stack: Add more checks about input prov bearers
2020-07-15 16:11:27 +08:00
Island
cf98746771
Merge branch 'feat/ble_mesh_use_iram_for_mem_alloc_v4.0' into 'release/v4.0'
...
Feat/ble mesh use diff ram for mem alloc (v4.0)
See merge request espressif/esp-idf!9618
2020-07-15 16:07:00 +08:00
Michael (XIAO Xufeng)
7f99280b40
spi_flash: add unit test for read/write performance (no performance
...
check)
2020-07-15 14:41:02 +08:00
aleks
59c6afda95
espcoredump: fix error reported for blank partition
2020-07-15 08:30:28 +02:00
lly
1e528fa739
ble_mesh: stack: Rename mesh adv queue and relay queue
2020-07-15 11:10:14 +08:00