fix: properly resolve component dependencies

There is currently a bug in the __build_resolve_and_add_req function in
tools/cmake/build.cmake where the check for registered component
requirements is incorrectly applied to the component itself rather than
its dependencies. This issue likely originated from a typo, using
component_target instead of _component_target. To prevent further
confusion, _component_target has been renamed to _req_target.

Fixing this revealed multiple incorrect dependencies for the Linux
target, which have now been resolved by explicitly specifying the
dependencies for the Linux target.

Closes https://github.com/espressif/esp-idf/issues/13447

Signed-off-by: Frantisek Hrbata <frantisek.hrbata@espressif.com>

components/console/CMakeLists.txt

@@ -7,8 +7,10 @@ set(srcs "commands.c"
 
 if(${target} STREQUAL "linux")
     list(APPEND srcs "esp_console_repl_linux.c")
+    set(requires "")
 else()
     list(APPEND srcs "esp_console_repl_chip.c")
+    set(requires vfs esp_vfs_console)
 endif()
 
 set(argtable_srcs argtable3/arg_cmd.c
@@ -31,7 +33,7 @@ idf_component_register(SRCS ${srcs}
                             ${argtable_srcs}
                     INCLUDE_DIRS ${CMAKE_CURRENT_SOURCE_DIR}
                     PRIV_INCLUDE_DIRS private_include
-                    REQUIRES vfs esp_vfs_console
+                    REQUIRES "${requires}"
                     PRIV_REQUIRES esp_driver_uart
                                   esp_driver_usb_serial_jtag
                     )

components/efuse/CMakeLists.txt

@@ -35,8 +35,13 @@ if(BOOTLOADER_BUILD)
                     PRIV_INCLUDE_DIRS "${private_include}")
 else()
     list(APPEND srcs "src/esp_efuse_startup.c")
+    if(${target} STREQUAL "linux")
+        set(priv_requires soc spi_flash esp_system esp_partition)
+    else()
+        set(priv_requires bootloader_support soc spi_flash esp_system esp_partition esp_app_format)
+    endif()
     idf_component_register(SRCS "${srcs}"
-                    PRIV_REQUIRES bootloader_support soc spi_flash esp_system esp_partition esp_app_format
+                    PRIV_REQUIRES "${priv_requires}"
                     INCLUDE_DIRS "${include_dirs}"
                     PRIV_INCLUDE_DIRS "${private_include}")
     if(NOT ${target} STREQUAL "linux")

components/efuse/test_apps/main/CMakeLists.txt

@@ -14,5 +14,5 @@ set(src_dirs "." "${dir}")
 
 idf_component_register(SRC_DIRS "${src_dirs}"
                        PRIV_INCLUDE_DIRS "." "${dir}/include" "../../private_include" "../../${target}/private_include"
-                       PRIV_REQUIRES cmock efuse bootloader_support esp_timer
+                       PRIV_REQUIRES cmock efuse esp_timer
                        WHOLE_ARCHIVE)

components/esp_driver_ana_cmpr/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 
 # Analog comparator related source files
@@ -8,8 +10,14 @@ if(CONFIG_SOC_ANA_CMPR_SUPPORTED)
     endif()
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio)
+endif()
+
 idf_component_register(SRCS ${srcs}
                            INCLUDE_DIRS "include"
-                           PRIV_REQUIRES esp_pm esp_driver_gpio
+                           PRIV_REQUIRES "${priv_requires}"
                            LDFRAGMENTS "linker.lf"
                           )

components/esp_driver_cam/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs "esp_cam_ctlr.c")
 
 set(include "include" "interface")
@@ -7,7 +9,13 @@ if(CONFIG_SOC_MIPI_CSI_SUPPORTED)
     list(APPEND include "csi/include")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_mm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${include}
-                       PRIV_REQUIRES esp_mm
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_gpio/CMakeLists.txt

@@ -1,6 +1,9 @@
 idf_build_get_property(target IDF_TARGET)
 
 if(${target} STREQUAL "linux")
+    # TODO: Remove this once all components have their requirements explicitly defined
+    # and using set(COMPONENTS main).
+    idf_component_register()
     return() # This component is not supported by the POSIX/Linux simulator
 endif()
 

components/esp_driver_gptimer/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_GPTIMER_SUPPORTED)
@@ -9,8 +11,14 @@ if(CONFIG_SOC_TIMER_SUPPORT_ETM)
     list(APPEND srcs "src/gptimer_etm.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(requires "")
+else()
+    set(requires esp_pm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       REQUIRES "esp_pm"
+                       REQUIRES "${requires}"
                        LDFRAGMENTS "linker.lf"
                       )

components/esp_driver_i2c/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(include "include")
 
@@ -13,8 +15,14 @@ if(CONFIG_SOC_I2C_SUPPORTED)
 
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires esp_ringbuf)
+else()
+    set(priv_requires esp_driver_gpio esp_pm esp_ringbuf)
+endif()
+
 idf_component_register(SRCS ${srcs}
                     INCLUDE_DIRS ${include}
-                    PRIV_REQUIRES esp_driver_gpio esp_pm esp_ringbuf
+                    PRIV_REQUIRES "${priv_requires}"
                     LDFRAGMENTS "linker.lf"
                     )

components/esp_driver_jpeg/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 
@@ -21,7 +23,13 @@ if(CONFIG_SOC_JPEG_CODEC_SUPPORTED)
     endif()
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_mm esp_pm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_mm" "esp_pm"
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_ledc/CMakeLists.txt

@@ -1,3 +1,4 @@
+idf_build_get_property(target IDF_TARGET)
 
 set(srcs)
 set(public_include "include")
@@ -6,9 +7,15 @@ if(CONFIG_SOC_LEDC_SUPPORTED)
     list(APPEND srcs "src/ledc.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio)
+endif()
+
 idf_component_register(
     SRCS ${srcs}
     INCLUDE_DIRS ${public_include}
-    PRIV_REQUIRES "esp_pm" "esp_driver_gpio"
+    PRIV_REQUIRES "${priv_requires}"
     LDFRAGMENTS "linker.lf"
 )

components/esp_driver_mcpwm/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_MCPWM_SUPPORTED)
@@ -14,8 +16,14 @@ if(CONFIG_SOC_MCPWM_SUPPORTED)
     endif()
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_pm" "esp_driver_gpio"
+                       PRIV_REQUIRES "${priv_requires}"
                        LDFRAGMENTS "linker.lf"
                       )

components/esp_driver_parlio/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_PARLIO_SUPPORTED)
@@ -6,7 +8,13 @@ if(CONFIG_SOC_PARLIO_SUPPORTED)
                      "src/parlio_rx.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio esp_mm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_pm" "esp_driver_gpio" "esp_mm"
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_pcnt/CMakeLists.txt

@@ -1,11 +1,19 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_PCNT_SUPPORTED)
     list(APPEND srcs "src/pulse_cnt.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_pm" "esp_driver_gpio"
+                       PRIV_REQUIRES "${priv_requires}"
                        LDFRAGMENTS "linker.lf"
                       )

components/esp_driver_ppa/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_PPA_SUPPORTED)
@@ -7,7 +9,14 @@ if(CONFIG_SOC_PPA_SUPPORTED)
                      "src/ppa_fill.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_mm esp_pm)
+endif()
+
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES esp_mm esp_pm
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_rmt/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_RMT_SUPPORTED)
@@ -7,8 +9,14 @@ if(CONFIG_SOC_RMT_SUPPORTED)
                      "src/rmt_tx.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio esp_mm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_pm" "esp_driver_gpio" "esp_mm"
+                       PRIV_REQUIRES "${priv_requires}"
                        LDFRAGMENTS "linker.lf"
                       )

components/esp_driver_sdio/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 
 set(public_include "include")
@@ -7,7 +9,13 @@ if(CONFIG_SOC_SDIO_SLAVE_SUPPORTED)
     list(APPEND srcs "src/sdio_slave.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires esp_ringbuf)
+else()
+    set(priv_requires esp_driver_gpio esp_ringbuf)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES esp_driver_gpio esp_ringbuf
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_sdm/CMakeLists.txt

@@ -1,11 +1,19 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_SDM_SUPPORTED)
     list(APPEND srcs "src/sdm.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires "")
+else()
+    set(priv_requires esp_pm esp_driver_gpio)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       PRIV_REQUIRES "esp_pm" "esp_driver_gpio"
+                       PRIV_REQUIRES "${priv_requires}"
                        LDFRAGMENTS "linker.lf"
                       )

components/esp_driver_sdmmc/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 
 set(public_include "include")
@@ -8,8 +10,16 @@ if(CONFIG_SOC_SDMMC_HOST_SUPPORTED)
                      "src/sdmmc_host.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(requires "")
+    set(priv_requires esp_timer)
+else()
+    set(requires sdmmc esp_driver_gpio)
+    set(priv_requires esp_timer esp_pm esp_mm)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       REQUIRES sdmmc esp_driver_gpio
+                       REQUIRES "${requires}"
-                       PRIV_REQUIRES esp_timer esp_pm esp_mm
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_sdspi/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 
 set(public_include "include")
@@ -8,8 +10,16 @@ if(CONFIG_SOC_GPSPI_SUPPORTED)
                      "src/sdspi_transaction.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(requires "")
+    set(priv_requires esp_timer)
+else()
+    set(requires sdmmc esp_driver_spi esp_driver_gpio)
+    set(priv_requires esp_timer)
+endif()
+
 idf_component_register(SRCS ${srcs}
                        INCLUDE_DIRS ${public_include}
-                       REQUIRES sdmmc esp_driver_spi esp_driver_gpio
+                       REQUIRES "${requires}"
-                       PRIV_REQUIRES esp_timer
+                       PRIV_REQUIRES "${priv_requires}"
                       )

components/esp_driver_uart/CMakeLists.txt

@@ -1,13 +1,21 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(public_include "include")
 if(CONFIG_SOC_UART_SUPPORTED)
     list(APPEND srcs "src/uart.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires esp_ringbuf)
+else()
+    set(priv_requires esp_pm esp_driver_gpio esp_ringbuf)
+endif()
+
 idf_component_register(
     SRCS ${srcs}
     INCLUDE_DIRS ${public_include}
-    PRIV_REQUIRES esp_pm esp_driver_gpio esp_ringbuf
+    PRIV_REQUIRES "${priv_requires}"
     LDFRAGMENTS "linker.lf"
 )
 

components/esp_driver_usb_serial_jtag/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(target IDF_TARGET)
+
 set(srcs)
 set(include "include")
 
@@ -7,9 +9,15 @@ if(CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED)
                      "src/usb_serial_jtag_connection_monitor.c")
 endif()
 
+if(${target} STREQUAL "linux")
+    set(priv_requires esp_ringbuf esp_timer)
+else()
+    set(priv_requires esp_driver_gpio esp_ringbuf esp_pm esp_timer)
+endif()
+
 idf_component_register(SRCS ${srcs}
                     INCLUDE_DIRS ${include}
-                    PRIV_REQUIRES esp_driver_gpio esp_ringbuf esp_pm esp_timer
+                    PRIV_REQUIRES "${priv_requires}"
                     )
 
 if(CONFIG_VFS_SUPPORT_IO AND CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED)

components/esp_phy/CMakeLists.txt

@@ -6,6 +6,7 @@ endif()
 
 if(IDF_TARGET STREQUAL "esp32p4" OR IDF_TARGET STREQUAL "esp32c61")
     # TODO: IDF-7460, IDF-8851, IDF-9553
+    idf_component_register()
     return()
 endif()
 

components/nvs_flash/CMakeLists.txt

@@ -14,9 +14,16 @@ set(srcs "src/nvs_api.cpp"
          "src/nvs_types.cpp"
          "src/nvs_platform.cpp")
 
+set(requires esp_partition)
+if(${target} STREQUAL "linux")
+    set(priv_requires spi_flash)
+else()
+    set(priv_requires spi_flash newlib)
+endif()
+
 idf_component_register(SRCS "${srcs}"
-                    REQUIRES "esp_partition"
+                    REQUIRES "${requires}"
-                    PRIV_REQUIRES spi_flash newlib
+                    PRIV_REQUIRES "${priv_requires}"
                     INCLUDE_DIRS "include"
                     "../spi_flash/include"
                     PRIV_INCLUDE_DIRS "private_include")

examples/get-started/hello_world/main/CMakeLists.txt

@@ -1,2 +1,3 @@
 idf_component_register(SRCS "hello_world_main.c"
+                    PRIV_REQUIRES spi_flash
                     INCLUDE_DIRS "")

examples/protocols/https_mbedtls/main/CMakeLists.txt

@@ -2,4 +2,5 @@
 #
 # (If this was a component, we would set COMPONENT_EMBED_TXTFILES here.)
 idf_component_register(SRCS "https_mbedtls_example_main.c"
+                    PRIV_REQUIRES esp_event nvs_flash esp_netif mbedtls
                     INCLUDE_DIRS ".")

tools/cmake/build.cmake

@@ -262,13 +262,14 @@ endfunction()
 # Resolve the requirement component to the component target created for that component.
 #
 function(__build_resolve_and_add_req var component_target req type)
-    __component_get_target(_component_target ${req})
+    __component_get_target(_req_target ${req})
-    __component_get_property(_component_registered ${component_target} __COMPONENT_REGISTERED)
+    __component_get_property(_req_registered ${_req_target} __COMPONENT_REGISTERED)
-    if(NOT _component_target OR NOT _component_registered)
+    if(NOT _req_target OR NOT _req_registered)
-        message(FATAL_ERROR "Failed to resolve component '${req}'.")
+        __component_get_property(_component_name ${component_target} COMPONENT_NAME)
+        message(FATAL_ERROR "Failed to resolve component '${req}' required by component '${_component_name}'.")
     endif()
-    __component_set_property(${component_target} ${type} ${_component_target} APPEND)
+    __component_set_property(${component_target} ${type} ${_req_target} APPEND)
-    set(${var} ${_component_target} PARENT_SCOPE)
+    set(${var} ${_req_target} PARENT_SCOPE)
 endfunction()
 
 #
@@ -449,7 +450,7 @@ endfunction()
 #                       if PROJECT_DIR is set and CMAKE_SOURCE_DIR/sdkconfig if not
 # @param[in, optional] SDKCONFIG_DEFAULTS (single value) config defaults file to use for the build; defaults
 #                       to none (Kconfig defaults or previously generated config are used)
-# @param[in, optional] BUILD_DIR (single value) directory for build artifacts; defautls to CMAKE_BINARY_DIR
+# @param[in, optional] BUILD_DIR (single value) directory for build artifacts; defaults to CMAKE_BINARY_DIR
 # @param[in, optional] COMPONENTS (multivalue) select components to process among the components
 #                       known by the build system
 #                       (added via `idf_build_component`). This argument is used to trim the build.

tools/idf_py_actions/hints.yml

@@ -216,7 +216,7 @@
 
 -
     re: "Failed to resolve component '(?!esp_ipc)(\\w+)'"
-    hint: "The component {} could not be found. This could be because: component name was misspelled, the component was not added to the build, the component has been moved to the IDF component manager or has been removed and refactored into some other component.\nPlease look out for component in 'https://components.espressif.com' and add using 'idf.py add-dependency' command.\nRefer to the migration guide for more details about moved components.\nRefer to the build-system guide for more details about how components are found and included in the build."
+    hint: "The component {} could not be found. This could be because: component name was misspelled, the component was not added to the build, the component has been moved to the IDF component manager, the component has been removed and refactored into some other component or the component may not be supported by the selected target.\nPlease look out for component in 'https://components.espressif.com' and add using 'idf.py add-dependency' command.\nRefer to the migration guide for more details about moved components.\nRefer to the build-system guide for more details about how components are found and included in the build."
     match_to_output: True
 
 -

tools/test_build_system/test_components.py

@@ -87,21 +87,21 @@ def test_component_properties_are_set(idf_py: IdfPyFunc, test_app_copy: Path) ->
     assert 'SRCS:{}'.format((test_app_copy / 'main' / 'build_test_app.c').as_posix()) in ret.stdout, 'Component properties should be set'
 
 
-def test_component_overriden_dir(idf_py: IdfPyFunc, test_app_copy: Path, default_idf_env: EnvDict) -> None:
+def test_component_overridden_dir(idf_py: IdfPyFunc, test_app_copy: Path, default_idf_env: EnvDict) -> None:
-    logging.info('Getting component overriden dir')
+    logging.info('Getting component overridden dir')
     (test_app_copy / 'components' / 'hal').mkdir(parents=True)
     (test_app_copy / 'components' / 'hal' / 'CMakeLists.txt').write_text('\n'.join([
-        'idf_component_get_property(overriden_dir ${COMPONENT_NAME} COMPONENT_OVERRIDEN_DIR)',
+        'idf_component_get_property(overridden_dir ${COMPONENT_NAME} COMPONENT_OVERRIDEN_DIR)',
-        'message(STATUS overriden_dir:${overriden_dir})']))
+        'message(STATUS overridden_dir:${overridden_dir})', 'idf_component_register()']))
     ret = idf_py('reconfigure')
     idf_path = Path(default_idf_env.get('IDF_PATH'))
     # no registration, overrides registration as well
-    assert 'overriden_dir:{}'.format((idf_path / 'components' / 'hal').as_posix()) in ret.stdout, 'Failed to get overriden dir'
+    assert 'overridden_dir:{}'.format((idf_path / 'components' / 'hal').as_posix()) in ret.stdout, 'Failed to get overridden dir'
     append_to_file((test_app_copy / 'components' / 'hal' / 'CMakeLists.txt'), '\n'.join([
         '',
-        'idf_component_register(KCONFIG ${overriden_dir}/Kconfig)',
+        'idf_component_register(KCONFIG ${overridden_dir}/Kconfig)',
         'idf_component_get_property(kconfig ${COMPONENT_NAME} KCONFIG)',
-        'message(STATUS kconfig:${overriden_dir}/Kconfig)']))
+        'message(STATUS kconfig:${overridden_dir}/Kconfig)']))
     ret = idf_py('reconfigure', check=False)
     assert 'kconfig:{}'.format((idf_path / 'components' / 'hal').as_posix()) in ret.stdout, 'Failed to verify original `main` directory'
 

tools/test_idf_py/error_output.yml

@@ -47,7 +47,7 @@
     "HINT: The struct 'esp_tls_t' has now been made private - its elements can be only be accessed/modified through respective getter/setter functions. Please refer to the migration guide for more information."
 
 "Failed to resolve component 'component'\n":
-    "HINT: The component component could not be found. This could be because: component name was misspelled, the component was not added to the build, the component has been moved to the IDF component manager or has been removed and refactored into some other component.\nPlease look out for component in 'https://components.espressif.com' and add using 'idf.py add-dependency' command.\nRefer to the migration guide for more details about moved components.\nRefer to the build-system guide for more details about how components are found and included in the build."
+    "HINT: The component component could not be found. This could be because: component name was misspelled, the component was not added to the build, the component has been moved to the IDF component manager, the component has been removed and refactored into some other component or the component may not be supported by the selected target.\nPlease look out for component in 'https://components.espressif.com' and add using 'idf.py add-dependency' command.\nRefer to the migration guide for more details about moved components.\nRefer to the build-system guide for more details about how components are found and included in the build."
 
 'fatal error: tmp/atca_mbedtls_wrap.h: No such file or directory\n':
     "HINT: To use CONFIG_ESP_TLS_USE_SECURE_ELEMENT option, please install `esp-cryptoauthlib` using 'idf.py add-dependency espressif/esp-cryptoauthlib'"

tools/unit-test-app/components/test_utils/CMakeLists.txt

@@ -1,3 +1,5 @@
+idf_build_get_property(arch IDF_TARGET_ARCH)
+
 set(srcs "memory_checks.c"
          "test_runner.c"
          "test_utils.c")
@@ -13,8 +15,14 @@ else()
     list(APPEND srcs "ref_clock_impl_timergroup.c")
 endif()
 
+if("${arch}" STREQUAL "xtensa")
+    set(priv_requires perfmon esp_driver_pcnt esp_driver_gptimer esp_driver_rmt esp_netif)
+else()
+    set(priv_requires esp_driver_pcnt esp_driver_gptimer esp_driver_rmt esp_netif)
+endif()
+
 idf_component_register(SRCS ${srcs}
                     INCLUDE_DIRS include
                     REQUIRES esp_partition idf_test cmock
-                    PRIV_REQUIRES perfmon esp_driver_pcnt esp_driver_gptimer esp_driver_rmt esp_netif)
+                    PRIV_REQUIRES "${priv_requires}")
 target_compile_options(${COMPONENT_LIB} PRIVATE "-Wno-format")