Merge branch 'refactor/remove_esp32comp_dep_on_efuse' into 'master'

G0: target components (components/esp32*) don't depend on efuse anymore

See merge request espressif/esp-idf!17623
This commit is contained in:
Omar Chebib 2022-03-31 17:40:25 +08:00
commit fa55cf608b
10 changed files with 44 additions and 40 deletions

View File

@ -14,11 +14,6 @@
#include "hal/efuse_ll.h"
#include "sdkconfig.h"
#ifdef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
#include "esp_efuse.h"
#include "esp_efuse_table.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
@ -44,28 +39,7 @@ typedef enum {
*
* @return true if flash encryption is enabled.
*/
static inline /** @cond */ IRAM_ATTR /** @endcond */ bool esp_flash_encryption_enabled(void)
{
uint32_t flash_crypt_cnt = 0;
#ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
flash_crypt_cnt = efuse_ll_get_flash_crypt_cnt();
#else
#if CONFIG_IDF_TARGET_ESP32
esp_efuse_read_field_blob(ESP_EFUSE_FLASH_CRYPT_CNT, &flash_crypt_cnt, ESP_EFUSE_FLASH_CRYPT_CNT[0]->bit_count);
#else
esp_efuse_read_field_blob(ESP_EFUSE_SPI_BOOT_CRYPT_CNT, &flash_crypt_cnt, ESP_EFUSE_SPI_BOOT_CRYPT_CNT[0]->bit_count);
#endif
#endif
/* __builtin_parity is in flash, so we calculate parity inline */
bool enabled = false;
while (flash_crypt_cnt) {
if (flash_crypt_cnt & 1) {
enabled = !enabled;
}
flash_crypt_cnt >>= 1;
}
return enabled;
}
bool esp_flash_encryption_enabled(void);
/* @brief Update on-device flash encryption
*

View File

@ -32,7 +32,7 @@ void esp_flash_encryption_init_checks()
ESP_LOGE(TAG, "Flash encryption eFuse bit was not enabled in bootloader but CONFIG_SECURE_FLASH_ENC_ENABLED is on");
abort();
}
#endif
#endif // CONFIG_SECURE_FLASH_CHECK_ENC_EN_IN_APP
// First check is: if Release mode flash encryption & secure boot are enabled then
// FLASH_CRYPT_CNT *must* be write protected. This will have happened automatically
@ -65,12 +65,42 @@ void esp_flash_encryption_init_checks()
ESP_LOGE(TAG, "Mismatch found in security options in bootloader menuconfig and efuse settings. Device is not secure.");
#else
ESP_LOGW(TAG, "Flash encryption mode is DEVELOPMENT (not secure)");
#endif
#endif // CONFIG_SECURE_FLASH_ENCRYPTION_MODE_RELEASE
} else if (mode == ESP_FLASH_ENC_MODE_RELEASE) {
ESP_LOGI(TAG, "Flash encryption mode is RELEASE");
}
}
#endif // BOOTLOADER_BUILD
/**
* This former inlined function must not be defined in the header file anymore.
* As it depends on efuse component, any use of it outside of `bootloader_support`,
* would require the caller component to include `efuse` as part of its `REQUIRES` or
* `PRIV_REQUIRES` entries.
* Attribute IRAM_ATTR must be specified for the app build.
*/
bool IRAM_ATTR esp_flash_encryption_enabled(void)
{
uint32_t flash_crypt_cnt = 0;
#ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
flash_crypt_cnt = efuse_ll_get_flash_crypt_cnt();
#else
#if CONFIG_IDF_TARGET_ESP32
esp_efuse_read_field_blob(ESP_EFUSE_FLASH_CRYPT_CNT, &flash_crypt_cnt, ESP_EFUSE_FLASH_CRYPT_CNT[0]->bit_count);
#else
esp_efuse_read_field_blob(ESP_EFUSE_SPI_BOOT_CRYPT_CNT, &flash_crypt_cnt, ESP_EFUSE_SPI_BOOT_CRYPT_CNT[0]->bit_count);
#endif
#endif
/* __builtin_parity is in flash, so we calculate parity inline */
bool enabled = false;
while (flash_crypt_cnt) {
if (flash_crypt_cnt & 1) {
enabled = !enabled;
}
flash_crypt_cnt >>= 1;
}
return enabled;
}
void esp_flash_write_protect_crypt_cnt(void)
{

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES xtensa "${legacy_reqs}"

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES riscv "${legacy_reqs}"

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES riscv "${legacy_reqs}"

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES riscv "${legacy_reqs}"

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES xtensa "${legacy_reqs}"

View File

@ -6,7 +6,7 @@ endif()
if(NOT BOOTLOADER_BUILD)
# [refactor-todo] propagate these requirements for compatibility
# remove in the future
set(legacy_reqs efuse soc)
set(legacy_reqs soc)
endif()
idf_component_register(REQUIRES xtensa "${legacy_reqs}"

View File

@ -31,14 +31,14 @@ endif()
if(CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN_EMBED)
idf_component_register(SRCS "${srcs}"
INCLUDE_DIRS "include" "${idf_target}/include"
PRIV_REQUIRES nvs_flash
PRIV_REQUIRES nvs_flash efuse
LDFRAGMENTS "${ldfragments}"
EMBED_FILES "${build_dir}/phy_multiple_init_data.bin"
)
else()
idf_component_register(SRCS "${srcs}"
INCLUDE_DIRS "include" "${idf_target}/include"
PRIV_REQUIRES nvs_flash
PRIV_REQUIRES nvs_flash efuse
LDFRAGMENTS "${ldfragments}"
)
endif()

View File

@ -11,7 +11,7 @@ Update fragment file grammar
Please follow the :ref:`migrate linker script fragment files grammar<ldgen-migrate-lf-grammar>` chapter for migrating v3.x grammar to the new one.
Dependency on driver component shall be explicit
------------------------------------------------
Component dependencies that shall be explicit
---------------------------------------------
In previous versions of ESP-IDF, target components (``components/esp32*``) had a dependency on ``driver`` component. Since target components were part of common requirements (:ref:`more info about common requirements <component-common-requirements>`), all components in the project implicitly had a dependency on ``driver`` component. Now that the dependency of target components on ``driver`` has been removed, every component which depends on ``driver`` has to declare this dependency explicitly. This can be done by adding ``REQUIRES driver`` or ``PRIV_REQUIRES driver`` in ``idf_component_register`` call inside component's ``CMakeLists.txt``. See :ref:`Component Requirements` for more information on specifying component requirements.
In previous versions of ESP-IDF, target components (``components/esp32*``) had a dependency on ``driver`` and ``efuse`` components. Since target components were part of common requirements (:ref:`more info about common requirements <component-common-requirements>`), all components in the project implicitly had a dependency on ``driver`` and ``efuse``. Now that the dependency of target components on these components has been removed, every component depending on ``driver`` or ``efuse`` has to declare this dependency explicitly. This can be done by adding ``REQUIRES <component_name>`` or ``PRIV_REQUIRES <component_name>`` in ``idf_component_register`` call inside component's ``CMakeLists.txt``. See :ref:`Component Requirements` for more information on specifying requirements.