Merge branch 'bugfix/cmake_fixes' into 'feature/cmake'

cmake: Various build system & docs fixes

See merge request idf/esp-idf!2438
This commit is contained in:
Angus Gratton 2018-05-30 09:28:41 +08:00
commit f5f966d91a
31 changed files with 379 additions and 211 deletions

View File

@ -4,6 +4,9 @@
#
mainmenu "Espressif IoT Development Framework Configuration"
config IDF_CMAKE
bool
option env="IDF_CMAKE"
menu "SDK tool configuration"
config TOOLPREFIX
@ -15,6 +18,7 @@ config TOOLPREFIX
config PYTHON
string "Python 2 interpreter"
depends on !IDF_CMAKE
default "python"
help
The executable name/path that is used to run python. On some systems Python 2.x

View File

@ -1,7 +1,7 @@
set(COMPONENT_SRCDIRS ".")
set(COMPONENT_ADD_INCLUDEDIRS "include")
set(COMPONENT_REQUIRES "")
set(COMPONENT_PRIV_REQUIRES bootloader_support spi_flash)
set(COMPONENT_REQUIRES spi_flash)
set(COMPONENT_PRIV_REQUIRES bootloader_support)
register_component()

View File

@ -20,10 +20,12 @@ else()
set(COMPONENT_SRCDIRS ". hwcrypto")
set(COMPONENT_ADD_INCLUDEDIRS "include")
set(COMPONENT_REQUIRES driver) # required because esp_sleep.h uses gpio_num_t & touch_pad_t
set(COMPONENT_REQUIRES driver tcpip_adapter)
# driver is a public requirement because esp_sleep.h uses gpio_num_t & touch_pad_t
# tcpip_adapter is a public requirement because esp_event.h uses tcpip_adapter types
set(COMPONENT_PRIV_REQUIRES
app_trace bootloader_support ethernet log mbedtls nvs_flash
pthread spi_flash tcpip_adapter vfs wpa_supplicant xtensa-debug-module)
pthread spi_flash vfs wpa_supplicant xtensa-debug-module)
register_component()
@ -65,8 +67,8 @@ else()
set(LD_DIR ${CMAKE_CURRENT_SOURCE_DIR}/ld)
add_custom_command(
OUTPUT esp32_out.ld
COMMAND "${CMAKE_C_COMPILER}" -C -P -x c -E -o esp32_out.ld -I ${CMAKE_BINARY_DIR} ${LD_DIR}/esp32.ld
MAIN_DEPENDENCY ${LD_DIR}/esp32.ld
COMMAND "${CMAKE_C_COMPILER}" -C -P -x c -E -o esp32_out.ld -I ${CONFIG_DIR} ${LD_DIR}/esp32.ld
MAIN_DEPENDENCY ${LD_DIR}/esp32.ld ${SDKCONFIG_H}
COMMENT "Generating linker script..."
VERBATIM)
add_custom_target(esp32_linker_script DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/esp32_out.ld)

@ -1 +1 @@
Subproject commit 8cd9fd455e98a5c818f2796b4b83107884b7874c
Subproject commit 92a091649f7c8476580177e2a769b15d9c4c191f

View File

@ -1,7 +1,7 @@
register_config_only_component()
# Generate pre-canned flasher args files suitable for passing to esptool.py
foreach(part project app bootloader)
foreach(part project app bootloader partition_table)
configure_file(
"${CMAKE_CURRENT_LIST_DIR}/flash_${part}_args.in"
"${CMAKE_BINARY_DIR}/flash_${part}_args"

View File

@ -2,6 +2,7 @@ menu "Serial flasher config"
config ESPTOOLPY_PORT
string "Default serial port"
depends on !IDF_CMAKE
default "/dev/ttyUSB0"
help
The serial port that's connected to the ESP chip. This can be overridden by setting the ESPPORT
@ -11,6 +12,7 @@ config ESPTOOLPY_PORT
choice ESPTOOLPY_BAUD
prompt "Default baud rate"
depends on !IDF_CMAKE
default ESPTOOLPY_BAUD_115200B
help
Default baud rate to use while communicating with the ESP chip. Can be overridden by
@ -36,6 +38,7 @@ config ESPTOOLPY_BAUD_OTHER_VAL
config ESPTOOLPY_BAUD
int
depends on !IDF_CMAKE
default 115200 if ESPTOOLPY_BAUD_115200B
default 230400 if ESPTOOLPY_BAUD_230400B
default 921600 if ESPTOOLPY_BAUD_921600B
@ -44,6 +47,7 @@ config ESPTOOLPY_BAUD
config ESPTOOLPY_COMPRESSED
bool "Use compressed upload"
depends on !IDF_CMAKE
default "y"
help
The flasher tool can send data compressed using zlib, letting the ROM on the ESP chip

View File

@ -1,4 +1 @@
--flash_mode ${ESPFLASHMODE}
--flash_size ${ESPFLASHSIZE}
--flash_freq ${ESPFLASHFREQ}
${CONFIG_APP_OFFSET} ${PROJECT_NAME}.bin

View File

@ -1,4 +1 @@
--flash_mode ${ESPFLASHMODE}
--flash_size ${ESPFLASHSIZE}
--flash_freq ${ESPFLASHFREQ}
0x8000 partition_table/partition-table.bin

View File

@ -4,8 +4,14 @@
"--flash_freq", "${ESPFLASHFREQ}" ],
"flash_files" : {
"0x1000" : "bootloader/bootloader.bin",
"0x8000" : "partition_table/partition-table.bin",
"${PARTITION_TABLE_OFFSET}" : "partition_table/partition-table.bin",
"${CONFIG_APP_OFFSET}" : "${PROJECT_NAME}.bin",
"${PHY_PARTITION_OFFSET}" : "${PHY_PARTITION_BIN_FILE}"
}
},
"bootloader" : { "offset" : "0x1000",
"file" : "bootloader/bootloader.bin" },
"app" : { "offset" : "${CONFIG_APP_OFFSET}",
"file" : "${PROJECT_NAME}.bin" },
"partition_table" : { "offset" : "${PARTITION_TABLE_OFFSET}",
"file" : "partition_table/partition-table.bin" }
}

View File

@ -16,7 +16,7 @@ set(COMPONENT_SRCDIRS
${LWIP_PPP_DIRS} netif
port/freertos port/netif port/debug port)
set(COMPONENT_REQUIRES "")
set(COMPONENT_REQUIRES vfs)
set(COMPONENT_PRIV_REQUIRES ethernet tcpip_adapter)
register_component()

View File

@ -1,5 +1,3 @@
set(partition_table_offset 0x8000)
register_config_only_component()
# Set partition_csv to the configured partition source file
@ -56,5 +54,5 @@ add_custom_target(partition_table ALL DEPENDS "${final_partition_bin}")
# the list of esptool write arguments for flashing
set_property(GLOBAL APPEND_STRING PROPERTY
ESPTOOL_WRITE_FLASH_ARGS
"${partition_table_offset} ${final_partition_bin} ")
"${PARTITION_TABLE_OFFSET} ${final_partition_bin} ")

View File

@ -0,0 +1 @@
set(PARTITION_TABLE_OFFSET 0x8000)

View File

@ -130,6 +130,23 @@ You can also use an IDE with CMake integration. The IDE will want to know the pa
When adding custom non-build steps like "flash" to the IDE, it is recommended to execute ``idf.py`` for these "special" commands.
.. setting-python-interpreter:
Setting the Python Interpreter
------------------------------
Currently, ESP-IDF only works with Python 2.7. If you have a system where the default ``python`` interpreter is Python 3.x, this can lead to problems.
If using ``idf.py``, running ``idf.py`` as ``python2 $IDF_PATH/tools/idf.py ...`` will work around this issue (``idf.py`` will tell other Python processes to use the same Python interpreter). You can set up a shell alias or another script to simplify the command.
If using CMake directly, running ``cmake -D PYTHON=python2 ...`` will cause CMake to override the default Python interpreter.
If using an IDE with CMake, setting the ``PYTHON`` value as a CMake cache override in the IDE UI will override the default Python interpreter.
To manage the Python version more generally via the command line, check out the tools pyenv_ or virtualenv_. These let you change the default python version.
.. _example-project-structure:
Example Project
===============
@ -190,6 +207,8 @@ Minimal project::
project(myProject)
.. _project-mandatory-parts:
Mandatory Parts
---------------
@ -758,12 +777,23 @@ For project components (not part of ESP-IDF), there are a few options:
The best option will depend on your particular project and its users.
Build System Metadata
=====================
For integration into IDEs and other build systems, when CMake runs the build process generates a number of metadata files in the ``build/`` directory. To regenerate these files, run ``cmake`` or ``idf.py reconfigure`` (or any other ``idf.py`` build command).
- ``compile_commands.json`` is a standard format JSON file which describes every source file which is compiled in the project. A CMake feature generates this file, and many IDEs know how to parse it.
- ``project_description.json`` contains some general information about the ESP-IDF project, configured paths, etc.
- ``flasher_args.json`` contains esptool.py arguments to flash the project's binary files. There are also ``flash_*_args`` files which can be used directly with esptool.py. See `Flash arguments`_.
- ``CMakeCache.txt`` is the CMake cache file which contains other information about the CMake process, toolchain, etc.
- ``config/sdkconfig.json`` is a JSON-formatted version of the project configuration values.
.. _gnu-make-to-cmake:
Migrating from ESP-IDF GNU Make System
======================================
Some aspects of the CMake-based ESP-IDF build system are very similar to the older GNU Make-based system. For example, to adapt a ``component.mk`` file to ``CMakeLists.txt`` variables like ``COMPONENT_SRCS`` and ``COMPONENT_SRCDIRS`` can stay the same and the syntax only needs changing to CMake syntax.
Some aspects of the CMake-based ESP-IDF build system are very similar to the older GNU Make-based system. For example, to adapt a ``component.mk`` file to ``CMakeLists.txt`` variables like ``COMPONENT_ADD_INCLUDEDIRS`` and ``COMPONENT_SRCDIRS`` can stay the same and the syntax only needs changing to CMake syntax.
Automatic Conversion Tool
-------------------------
@ -782,6 +812,14 @@ It does so by running ``make`` to expand the ESP-IDF build system variables whic
The conversion tool is not capable of dealing with complex Makefile logic or unusual targets. These will need to be converted by hand.
'main' is no longer a component
-------------------------------
In the GNU Make build system ``main`` is a component with a ``component.mk`` file like other components.
Due to CMake requirements for building executables, ``main`` source files are now linked directly into the final binary. The source files in ``main`` must be listed in the ``MAIN_SRCS`` variable (see :ref:`project mandatory variables <project-mandatory-parts>` for more details). At least one source file has to be listed here (although it doesn't need to contain anything in particular).
In general, it's better not to have too many source files in ``MAIN_SRCS``. If you find that you are adding many source files here, see if you reorganize and group some into project components (see the :ref:`example project structure <example-project-structure>`, above).
No Longer Available in CMake
----------------------------
@ -793,10 +831,10 @@ Some features are significantly different or removed in the CMake-based system.
- ``CC``, ``LD``, ``AR``, ``OBJCOPY``: Full paths to each tool from the gcc xtensa cross-toolchain. Use ``CMAKE_C_COMPILER``, ``CMAKE_C_LINK_EXECUTABLE``, ``CMAKE_OBJCOPY``, etc instead. `Full list here <cmake language variables_>`_.
- ``HOSTCC``, ``HOSTLD``, ``HOSTAR``: Full names of each tool from the host native toolchain. These are no longer provided, external projects should detect any required host toolchain manually.
- ``COMPONENT_ADD_LDFLAGS``: Used to override linker flags. Use the CMake `target_link_libraries`_ command instead.
- ``COMPONENT_ADD_LINKER_DEPS``: List of files that linking should depend on. `target_link_libraries`_ will usually infer these dependencies automatically for files like linker scripts.
- ``COMPONENT_SUBMODULES``: No longer used by ESP-IDF components, the build system will automatically enumerate all submodules in the repo.
- ``COMPONENT_ADD_LINKER_DEPS``: List of files that linking should depend on. `target_link_libraries`_ will usually infer these dependencies automatically. For linker scripts, use the provided custom CMake function ``target_linker_scripts``.
- ``COMPONENT_SUBMODULES``: No longer used, the build system will automatically enumerate all submodules in the ESP-IDF repo.
- ``COMPONENT_EXTRA_INCLUDES``: Used to be an alternative to ``COMPONENT_PRIV_INCLUDEDIRS`` for absolute paths. Use ``COMPONENT_PRIV_INCLUDEDIRS`` for all cases now (can be relative or absolute).
- ``COMPONENT_OBJS``: Used to be specified as a list of object files. Now specified as an optional list of source files via ``COMPONENT_SRCS``.
- ``COMPONENT_OBJS``: Previously, component sources could be specified as a list of object files. Now they can be specified as an list of source files via ``COMPONENT_SRCS``.
- ``COMPONENT_EXTRA_CLEAN``: Set property ``ADDITIONAL_MAKE_CLEAN_FILES`` instead but note :ref:`CMake has some restrictions around this functionality <ADDITIONAL_MAKE_CLEAN_FILES_note>`.
- ``COMPONENT_OWNBUILDTARGET`` & ``COMPONENT_OWNCLEANTARGET``: Use CMake `ExternalProject`_ instead. See :ref:`component-build-full-override` for full details.
- ``COMPONENT_CONFIG_ONLY``: Call ``register_config_only_component()`` instead. See `Configuration-Only Components`_.
@ -816,17 +854,6 @@ No Longer Necessary
It is no longer necessary to set ``COMPONENT_SRCDIRS`` if setting ``COMPONENT_SRCS`` (in fact, in the CMake-based system ``COMPONENT_SRCDIRS`` is ignored if ``COMPONENT_SRCS`` is set).
Build System Metadata
=====================
For integration into IDEs and other build systems, when cmake runs the build process generates a number of metadata files in the ``build/`` directory. To regenerate these files, run ``cmake`` or ``idf.py reconfigure`` (or any other ``idf.py`` build command).
- ``compile_commands.json`` is a standard format JSON file which describes every source file which is compiled in the project. A CMake feature generates this file, and many IDEs know how to parse it.
- ``project_description.json`` contains some general information about the ESP-IDF project, configured paths, etc.
- ``flasher_args.json`` contains esptool.py arguments to flash the project's binary files. There are also ``flash_*_args`` files which can be used directly with esptool.py. See `Flash arguments`_.
- ``CMakeCache.txt`` is the CMake cache file which contains other information about the CMake process, toolchain, etc.
- ``sdkconfig.json`` is a JSON-formatted version of the project configuration values.
.. _esp-idf-template: https://github.com/espressif/esp-idf-template
.. _cmake: https://cmake.org
.. _ninja: https://ninja-build.org
@ -848,3 +875,6 @@ For integration into IDEs and other build systems, when cmake runs the build pro
.. _target_link_libraries: https://cmake.org/cmake/help/v3.5/command/target_link_libraries.html#command:target_link_libraries
.. _cmake_toolchain_file: https://cmake.org/cmake/help/v3.5/variable/CMAKE_TOOLCHAIN_FILE.html
.. _quirc: https://github.com/dlbeer/quirc
.. _pyenv: https://github.com/pyenv/pyenv#README
.. _virtualenv: https://virtualenv.pypa.io/en/stable/

View File

@ -39,16 +39,20 @@ If you got here from section :ref:`get-started-setup-path`, while installing s/w
Linux and MacOS
---------------
Set up ``IDF_PATH`` and add ``idf.py`` to the PATH by adding the following two lines to ``~/.profile`` file::
Set up ``IDF_PATH`` and add ``idf.py`` to the PATH by adding the following two lines to your ``~/.profile`` file::
export IDF_PATH=~/esp/esp-idf
export PATH="$PATH:$IDF_PATH/tools"
.. note::
``~/.profile`` means a file named ``.profile`` in your user's home directory (which is abbreviated ``~`` in the shell).
Log off and log in back to make this change effective.
.. note::
If you have ``/bin/bash`` set as login shell, and both ``.bash_profile`` and ``.profile`` exist, then update ``.bash_profile`` instead.
Not all shells use ``.profile``. If you have ``/bin/bash`` and ``.bash_profile`` exists then update this file instead. For ``zsh``, update ``.zprofile``. Other shells may use other profile files (consult the shell's documentation).
Run the following command to check if ``IDF_PATH`` is set::

View File

@ -54,6 +54,8 @@ MacOS ::
ls /dev/cu.*
.. note: MacOS users: if you don't see the serial port then check you have the USB/serial drivers installed as shown in the Getting Started guide for your particular development board. For MacOS High Sierra (10.13), you may also have to explicitly allow the drivers to load. Open System Preferences -> Security & Privacy -> General and check if there is a message shown here about "System Software from developer ..." where the developer name is Silicon Labs or FTDI.
.. _linux-dialout-group:
Adding user to ``dialout`` on Linux
@ -69,7 +71,7 @@ Make sure you re-login to enable read and write permissions for the serial port.
Verify serial connection
------------------------
Now verify that the serial connection is operational. You can do this using a serial terminal program. In this example we will use `PuTTY SSH Client <http://www.putty.org/>`_ that is avilable for both Windows and Linux. You can use other serial program and set communication parameters like below.
Now verify that the serial connection is operational. You can do this using a serial terminal program. Windows and Linux users can use the `PuTTY SSH Client <http://www.putty.org/>`_ for this. Alternatively, any other serial program can be used with the communication parameters shown below.
Run terminal, set identified serial port, baud rate = 115200, data bits = 8, stop bits = 1, and parity = N. Below are example screen shots of setting the port and such transmission parameters (in short described as 115200-8-1-N) on Windows and Linux. Remember to select exactly the same serial port you have identified in steps above.

View File

@ -2,7 +2,7 @@
Get Started
***********
This document is intended to help users set up the software environment for developement of applications using hardware based on the Espressif ESP32. Through a simple example we would like to illustrate how to use ESP-IDF (Espressif IoT Development Framework), including the menu based configuration, compiling the ESP-IDF and firmware download to ESP32 boards.
This document is intended to help users set up the software environment for development of applications using hardware based on the Espressif ESP32. Through a simple example we would like to illustrate how to use ESP-IDF (Espressif IoT Development Framework), including the menu based configuration, compiling the ESP-IDF and firmware download to ESP32 boards.
.. note::
The CMake-based build system is currently in preview release. Documentation may have missing gaps, and you may enocunter bugs (please report these). To view documentation for the older GNU Make based build system, switch versions to the 'latest' master branch or a stable release.
@ -22,7 +22,8 @@ What You Need
To develop applications for ESP32 you need:
* **PC** loaded with either Windows, Linux or Mac operating system
* **Toolchain** to build the **Application** for ESP32
* **Toolchain** to compile code for ESP32
* **Build tools** CMake and Ninja to build a full **Application** for ESP32
* **ESP-IDF** that essentially contains API for ESP32 and scripts to operate the **Toolchain**
* A text editor to write programs (**Projects**) in C, e.g. `Eclipse <https://www.eclipse.org/>`_
* The **ESP32** board itself and a **USB cable** to connect it to the **PC**
@ -34,28 +35,23 @@ To develop applications for ESP32 you need:
Development of applications for ESP32
Preparation of development environment consists of three steps:
Development Environment Steps:
1. Setup of **Toolchain**
2. Getting of **ESP-IDF** from GitHub
3. Installation and configuration of **Eclipse**
2. Getting **ESP-IDF** from GitHub
You may skip the last step, if you prefer to use different editor.
Having environment set up, you are ready to start the most interesting part - the application development. This process may be summarized in four steps:
Once the development environment is set up, we will follow these steps to create an ESP-IDF application:
1. Configuration of a **Project** and writing the code
2. Compilation of the **Project** and linking it to build an **Application**
3. Flashing (uploading) of the **Application** to **ESP32**
4. Monitoring / debugging of the **Application**
See instructions below that will walk you through these steps.
3. Flashing (uploading) the compiled **Application** to **ESP32** over a USB/serial connection
4. Monitoring / debugging of the **Application** output via USB/serial
Guides
======
Development Board Guides
========================
If you have one of ESP32 development boards listed below, click on provided links to get you up and running.
If you have one of ESP32 development boards listed below, click on the link for hardware setup:
.. toctree::
:maxdepth: 1
@ -125,7 +121,7 @@ ESP-IDF will be downloaded into ``~/esp/esp-idf``.
.. highlight:: batch
For Windows Command Prompt users, the equivalent commands are::
For **Windows Command Prompt** users, the equivalent commands are::
mkdir %userprofile%\esp
cd %userprofile%\esp
@ -176,7 +172,7 @@ Copy :example:`get-started/hello_world` to ``~/esp`` directory::
.. highlight:: batch
For Windows Command Prompt users, the equivalent commands are::
For **Windows Command Prompt** users, the equivalent commands are::
cd %userprofile%\esp
xcopy /e /i %IDF_PATH%\examples\get-started\hello_world hello_world
@ -187,7 +183,7 @@ It is also possible to build examples in-place, without copying them first.
.. important::
The esp-idf build system does not support spaces in paths to esp-idf or to projects.
The esp-idf build system does not support spaces in the path to either esp-idf or to projects.
.. _get-started-connect:
@ -197,7 +193,6 @@ Connect
You are almost there. To be able to proceed further, connect ESP32 board to PC, check under what serial port the board is visible and verify if serial communication works. If you are not sure how to do it, check instructions in section :doc:`establish-serial-connection`. Note the port number, as it will be required in the next step.
.. _get-started-configure:
Configure
@ -212,9 +207,9 @@ Being in terminal window, go to directory of ``hello_world`` application by typi
.. highlight:: batch
For Windows Command Prompt users::
For **Windows Command Prompt** users::
cd %userprofile%\esp
cd %userprofile%\esp\hello_world
idf.py menuconfig
.. note:: If you get an error about ``idf.py`` not being found, check the ``tools`` directory is part of your Path as described above in :ref:`get-started-setup-path`. If there is no ``idf.py`` in the ``tools`` directory, check you have the correct branch for the CMake preview as shown under :ref:`get-started-get-esp-idf`.
@ -235,7 +230,7 @@ If previous steps have been done correctly, the following menu will be displayed
Here are couple of tips on navigation and use of ``menuconfig``:
* Use up & down arrow keys to navigate the menu.
* Use Enter key to go into a submenu, Escape key to go out or to exit.
* Use Enter key to go into a submenu, Escape key to go up a level or exit.
* Type ``?`` to see a help screen. Enter key exits the help screen.
* Use Space key, or ``Y`` and ``N`` keys to enable (Yes) and disable (No) configuration items with checkboxes "``[*]``"
* Pressing ``?`` while highlighting a configuration item displays help about that item.
@ -247,18 +242,52 @@ Here are couple of tips on navigation and use of ``menuconfig``:
.. _get-started-build-flash:
Build and Flash
===============
Build The Project and Flash
===========================
.. highlight:: bash
Now you can build and flash the application. Run::
Now you can build the project. Run::
idf.py build
This command will compile the application and all the ESP-IDF components, generate bootloader, partition table, and application binaries.
.. highlight: none
::
$ idf.py build
Running cmake in directory /path/to/hello_world/build
Executing "cmake -G Ninja --warn-uninitialized /path/to/hello_world"...
Warn about uninitialized values.
-- Found Git: /usr/bin/git (found version "2.17.0")
-- Building empty aws_iot component due to configuration
-- Component names: ...
-- Component paths: ...
... (more lines of build system output)
[527/527] Generating hello-world.bin
esptool.py v2.3.1
Project build complete. To flash, run this command:
../../../components/esptool_py/esptool/esptool.py -p (PORT) -b 921600 write_flash --flash_mode dio --flash_size detect --flash_freq 40m 0x10000 build/hello-world.bin build 0x1000 build/bootloader/bootloader.bin 0x8000 build/partition_table/partition-table.bin
or run 'idf.py flash'
If there are no errors, the build will finish by generating the firmware binary .bin file.
Flash To A Device
=================
Now you can flash the application to the ESP32 board. Run::
idf.py -p PORT flash
Replace PORT with the name of your ESP32 board's serial port. On Windows, serial ports have names like ``COM1``. On MacOS, they start with ``/dev/cu.``. On Linux, they start with ``/dev/tty``. (See :doc:`establish-serial-connection` for full details.)
This will compile the application and all the ESP-IDF components, generate bootloader, partition table, and application binaries, and flash these binaries to your ESP32 board.
This step will flash the binaries that you just built to your ESP32 board.
.. note:: Running ``idf.py build`` before ``idf.py flash`` is not actually necessary, the flash step will automatically build the project if required before flashing.
.. highlight:: none
@ -295,7 +324,7 @@ This will compile the application and all the ESP-IDF components, generate bootl
If there are no issues, at the end of build process, you should see messages describing progress of flashing the project binary image onto the ESP32. Finally, the module will be reset and "hello_world" application will be running there.
If you'd like to use the Eclipse IDE instead of running ``idf.py``, check out the :doc:`Eclipse guide <eclipse-setup>`.
.. (Not currently supported) If you'd like to use the Eclipse IDE instead of running ``idf.py``, check out the :doc:`Eclipse guide <eclipse-setup>`.
.. _get-started-build-monitor:
@ -303,9 +332,9 @@ If you'd like to use the Eclipse IDE instead of running ``idf.py``, check out th
Monitor
=======
To see if "hello_world" application is indeed running, type ``idf.py monitor``. This command is launching :doc:`IDF Monitor <idf-monitor>` application::
To see if "hello_world" application is indeed running, type ``idf.py -p PORT monitor``. This command is launching :doc:`IDF Monitor <idf-monitor>` application::
$ idf.py monitor
$ idf.py -p /dev/ttyUSB0 monitor
Running idf_monitor in directory [...]/esp/hello_world/build
Executing "python [...]/esp-idf/tools/idf_monitor.py -b 115200 [...]/esp/hello_world/build/hello-world.elf"...
--- idf_monitor on /dev/ttyUSB0 115200 ---
@ -335,7 +364,7 @@ To exit the monitor use shortcut ``Ctrl+]``.
e<><65><EFBFBD>)(Xn@<40>y.!<21><>(<28>PW+)<29><>Hn9a؅/9<>!<21>t5<74><35>P<EFBFBD>~<7E>k<EFBFBD><6B>e<EFBFBD>ea<65>5<EFBFBD>jA
~zY<7A><59>Y(1<>,1<15><> e<><65><EFBFBD>)(Xn@<40>y.!Dr<44>zY(<28>jpi<70>|<7C>+z5Ymvp
or monitor fails shortly after upload, your board is likely using 26MHz crystal, while the ESP-IDF assumes default of 40MHz. Exit the monitor, go back to the :ref:`menuconfig <get-started-configure>`, change :ref:`CONFIG_ESP32_XTAL_FREQ_SEL` to 26MHz, then :ref:`build and flash <get-started-build-flash>` the application again. This is found under ``idf.py menuconfig`` under Component config --> ESP32-specific --> Main XTAL frequency.
or monitor fails shortly after upload, your board is likely using 26MHz crystal. Most development board designs use 40MHz and the ESP-IDF uses this default value. Exit the monitor, go back to the :ref:`menuconfig <get-started-configure>`, change :ref:`CONFIG_ESP32_XTAL_FREQ_SEL` to 26MHz, then :ref:`build and flash <get-started-build-flash>` the application again. This is found under ``idf.py menuconfig`` under Component config --> ESP32-specific --> Main XTAL frequency.
.. note::
@ -367,9 +396,9 @@ Another solution is to update only what has changed. This method is useful if yo
.. highlight:: batch
For Windows Command Prompt users::
For **Windows Command Prompt** users::
cd %userprofile%\esp
cd %userprofile%\esp\esp-idf
git pull
git submodule update --init --recursive
@ -377,7 +406,7 @@ The ``git pull`` command is fetching and merging changes from ESP-IDF repository
.. highlight:: bash
If you would like to use specific release of ESP-IDF, e.g. `v2.1`, run::
To use a specific release of ESP-IDF, e.g. `v2.1`, run::
cd ~/esp
git clone https://github.com/espressif/esp-idf.git esp-idf-v2.1
@ -387,7 +416,7 @@ If you would like to use specific release of ESP-IDF, e.g. `v2.1`, run::
.. highlight:: batch
For Windows Command Prompt users::
For **Windows Command Prompt** users::
cd %userprofile%\esp
git clone https://github.com/espressif/esp-idf.git esp-idf-v2.1

View File

@ -8,6 +8,8 @@ Standard Setup of Toolchain for Mac OS
Install Prerequisites
=====================
ESP-IDF will use the version of Python installed by default on Mac OS.
- install pip::
sudo easy_install pip
@ -30,6 +32,13 @@ Install Prerequisites
- It is strongly recommended to also install ccache_ for faster builds. If you have HomeBrew_, this can be done via ``brew install ccache`` or ``sudo port install ccache`` on MacPorts_.
.. note::
If an error like this is shown during any step::
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
Then you will need to install the XCode command line tools to continue. You can install these by running ``xcode-select --install``.
Toolchain Setup
===============

View File

@ -45,10 +45,10 @@ Once Python is installed, open a Windows Command Prompt from the Start menu and
pip install pyserial
MConf
^^^^^
MConf for IDF
^^^^^^^^^^^^^
Download the ESP-IDF customized version of the configuration tool mconf from the `mconf releases page <mconf>`_.
Download the configuration tool mconf-idf from the `kconfig-frontends releases page <mconf-idf>`_. This is the ``mconf`` configuration tool with some minor customizations for ESP-IDF.
This tool will also need to be unzipped to a directory which is then `added to your Path <add-directory-windows-path>`_.

View File

@ -23,9 +23,9 @@ ESP-IDF Tools Installer
The easiest way to install ESP-IDF's prerequisites is to download the ESP-IDF Tools installer from this URL:
https://dl.espressif.com/dl/esp-idf-tools-setup-1.0.exe
https://dl.espressif.com/dl/esp-idf-tools-setup-1.1.exe
The installer will automatically install the ESP32 Xtensa gcc toolchain, Ninja_ build tool, and a customized configuration tool called mconf. The installer can also download and run installers for CMake_ and Python_ 2.7 if these are not already installed on the computer.
The installer will automatically install the ESP32 Xtensa gcc toolchain, Ninja_ build tool, and a configuration tool called mconf-idf_. The installer can also download and run installers for CMake_ and Python_ 2.7 if these are not already installed on the computer.
By default, the installer updates the Windows ``Path`` environment variable so all of these tools can be run from anywhere. If you disable this option, you will need to configure the environment where you are using ESP-IDF (terminal or chosen IDE) with the correct paths.
@ -68,5 +68,5 @@ For advanced users who want to customize the install process:
.. _ninja: https://ninja-build.org/
.. _Python: https://www.python.org/downloads/windows/
.. _Git for Windows: https://gitforwindows.org/
.. _mconf: https://github.com/espressif/kconfig-frontends/releases/
.. _mconf-idf: https://github.com/espressif/kconfig-frontends/releases/
.. _Github Desktop: https://desktop.github.com/

View File

@ -15,11 +15,11 @@ SDKCONFIG ?= $(PROJECT_PATH)/sdkconfig
# overrides (usually used for esp-idf examples)
SDKCONFIG_DEFAULTS ?= $(PROJECT_PATH)/sdkconfig.defaults
# Workaround to run make parallel (-j). mconf and conf cannot be made simultaneously
$(KCONFIG_TOOL_DIR)/mconf: $(KCONFIG_TOOL_DIR)/conf
# Workaround to run make parallel (-j). mconf-idf and conf-idf cannot be made simultaneously
$(KCONFIG_TOOL_DIR)/mconf-idf: $(KCONFIG_TOOL_DIR)/conf-idf
# reset MAKEFLAGS as the menuconfig makefile uses implicit compile rules
$(KCONFIG_TOOL_DIR)/mconf $(KCONFIG_TOOL_DIR)/conf: $(wildcard $(KCONFIG_TOOL_DIR)/*.c)
$(KCONFIG_TOOL_DIR)/mconf-idf $(KCONFIG_TOOL_DIR)/conf-idf: $(wildcard $(KCONFIG_TOOL_DIR)/*.c)
MAKEFLAGS="" CC=$(HOSTCC) LD=$(HOSTLD) \
$(MAKE) -C $(KCONFIG_TOOL_DIR)
@ -36,13 +36,14 @@ $(SDKCONFIG): defconfig
endif
endif
# macro for the commands to run kconfig tools conf or mconf.
# macro for the commands to run kconfig tools conf-idf or mconf-idf.
# $1 is the name (& args) of the conf tool to run
define RunConf
mkdir -p $(BUILD_DIR_BASE)/include/config
cd $(BUILD_DIR_BASE); KCONFIG_AUTOHEADER=$(abspath $(BUILD_DIR_BASE)/include/sdkconfig.h) \
COMPONENT_KCONFIGS="$(COMPONENT_KCONFIGS)" KCONFIG_CONFIG=$(SDKCONFIG) \
COMPONENT_KCONFIGS_PROJBUILD="$(COMPONENT_KCONFIGS_PROJBUILD)" \
IDF_CMAKE=n \
$(KCONFIG_TOOL_DIR)/$1 $(IDF_PATH)/Kconfig
endef
@ -58,7 +59,7 @@ ifndef MAKE_RESTARTS
# depend on any prerequisite that may cause a make restart as part of
# the prerequisite's own recipe.
menuconfig: $(KCONFIG_TOOL_DIR)/mconf
menuconfig: $(KCONFIG_TOOL_DIR)/mconf-idf
$(summary) MENUCONFIG
ifdef BATCH_BUILD
@echo "Can't run interactive configuration inside non-interactive build process."
@ -67,25 +68,25 @@ ifdef BATCH_BUILD
@echo "See esp-idf documentation for more details."
@exit 1
else
$(call RunConf,mconf)
$(call RunConf,mconf-idf)
endif
# defconfig creates a default config, based on SDKCONFIG_DEFAULTS if present
defconfig: $(KCONFIG_TOOL_DIR)/conf
defconfig: $(KCONFIG_TOOL_DIR)/conf-idf
$(summary) DEFCONFIG
ifneq ("$(wildcard $(SDKCONFIG_DEFAULTS))","")
cat $(SDKCONFIG_DEFAULTS) >> $(SDKCONFIG) # append defaults to sdkconfig, will override existing values
endif
$(call RunConf,conf --olddefconfig)
$(call RunConf,conf-idf --olddefconfig)
# if neither defconfig or menuconfig are requested, use the GENCONFIG rule to
# ensure generated config files are up to date
$(SDKCONFIG_MAKEFILE) $(BUILD_DIR_BASE)/include/sdkconfig.h: $(KCONFIG_TOOL_DIR)/conf $(SDKCONFIG) $(COMPONENT_KCONFIGS) $(COMPONENT_KCONFIGS_PROJBUILD) | $(call prereq_if_explicit,defconfig) $(call prereq_if_explicit,menuconfig)
$(SDKCONFIG_MAKEFILE) $(BUILD_DIR_BASE)/include/sdkconfig.h: $(KCONFIG_TOOL_DIR)/conf-idf $(SDKCONFIG) $(COMPONENT_KCONFIGS) $(COMPONENT_KCONFIGS_PROJBUILD) | $(call prereq_if_explicit,defconfig) $(call prereq_if_explicit,menuconfig)
$(summary) GENCONFIG
ifdef BATCH_BUILD # can't prompt for new config values like on terminal
$(call RunConf,conf --olddefconfig)
$(call RunConf,conf-idf --olddefconfig)
endif
$(call RunConf,conf --silentoldconfig)
$(call RunConf,conf-idf --silentoldconfig)
touch $(SDKCONFIG_MAKEFILE) $(BUILD_DIR_BASE)/include/sdkconfig.h # ensure newer than sdkconfig
else # "$(MAKE_RESTARTS)" != ""

View File

@ -98,8 +98,6 @@ function(idf_set_global_compiler_options)
# go into the final binary so have no impact on size)
add_compile_options(-ggdb)
add_compile_options("-I${CMAKE_BINARY_DIR}") # for sdkconfig.h
# Enable ccache if it's on the path
if(NOT CCACHE_DISABLE)
find_program(CCACHE_FOUND ccache)

View File

@ -1,27 +1,41 @@
include(ExternalProject)
macro(kconfig_set_variables)
set(CONFIG_DIR ${CMAKE_BINARY_DIR}/config)
set_default(SDKCONFIG ${PROJECT_PATH}/sdkconfig)
set(SDKCONFIG_HEADER ${CMAKE_BINARY_DIR}/sdkconfig.h)
set(SDKCONFIG_CMAKE ${CMAKE_BINARY_DIR}/sdkconfig.cmake)
set(SDKCONFIG_JSON ${CMAKE_BINARY_DIR}/sdkconfig.json)
set(SDKCONFIG_HEADER ${CONFIG_DIR}/sdkconfig.h)
set(SDKCONFIG_CMAKE ${CONFIG_DIR}/sdkconfig.cmake)
set(SDKCONFIG_JSON ${CONFIG_DIR}/sdkconfig.json)
set(ROOT_KCONFIG ${IDF_PATH}/Kconfig)
set_default(SDKCONFIG_DEFAULTS "${SDKCONFIG}.defaults")
# ensure all source files can include sdkconfig.h
include_directories("${CONFIG_DIR}")
endmacro()
if(CMAKE_HOST_WIN32)
# Prefer a prebuilt mconf on Windows
# Prefer a prebuilt mconf-idf on Windows
find_program(WINPTY winpty)
find_program(MCONF mconf-idf)
# Fall back to the old binary which was called 'mconf' not 'mconf-idf'
if(NOT MCONF)
find_program(MCONF mconf)
if(MCONF)
message(WARNING "Falling back to mconf binary '${MCONF}' not mconf-idf. "
"This is probably because an old version of IDF mconf is installed and this is fine. "
"However if there are config problems please check the Getting Started guide for your platform.")
endif()
endif()
if(NOT MCONF)
find_program(NATIVE_GCC gcc)
if(NOT NATIVE_GCC)
message(FATAL_ERROR
"Windows requires a prebuilt ESP-IDF-specific mconf for your platform "
"on the PATH, or an MSYS2 version of gcc on the PATH to build mconf. "
"Windows requires a prebuilt mconf-idf for your platform "
"on the PATH, or an MSYS2 version of gcc on the PATH to build mconf-idf. "
"Consult the setup docs for ESP-IDF on Windows.")
endif()
elseif(WINPTY)
@ -32,23 +46,32 @@ endif()
if(NOT MCONF)
# Use the existing Makefile to build mconf (out of tree) when needed
#
set(MCONF kconfig_bin/mconf)
set(MCONF kconfig_bin/mconf-idf)
externalproject_add(mconf
externalproject_add(mconf-idf
SOURCE_DIR ${IDF_PATH}/tools/kconfig
CONFIGURE_COMMAND ""
BINARY_DIR "kconfig_bin"
BUILD_COMMAND make -f ${IDF_PATH}/tools/kconfig/Makefile mconf
BUILD_COMMAND make -f ${IDF_PATH}/tools/kconfig/Makefile mconf-idf
BUILD_BYPRODUCTS ${MCONF}
INSTALL_COMMAND ""
EXCLUDE_FROM_ALL 1
)
set(menuconfig_depends DEPENDS mconf)
file(GLOB mconf_srcfiles ${IDF_PATH}/tools/kconfig/*.c)
externalproject_add_stepdependencies(mconf-idf build
${mconf_srcfiles}
${IDF_PATH}/tools/kconfig/Makefile
${CMAKE_CURRENT_LIST_FILE})
unset(mconf_srcfiles)
set(menuconfig_depends DEPENDS mconf-idf)
endif()
# Find all Kconfig files for all components
function(kconfig_process_config)
file(MAKE_DIRECTORY "${CMAKE_BINARY_DIR}/include/config")
file(MAKE_DIRECTORY "${CONFIG_DIR}")
set(kconfigs)
set(kconfigs_projbuild)
@ -83,9 +106,10 @@ function(kconfig_process_config)
${defaults_arg}
--create-config-if-missing
--env "COMPONENT_KCONFIGS=${kconfigs}"
--env "COMPONENT_KCONFIGS_PROJBUILD=${kconfigs_projbuild}")
--env "COMPONENT_KCONFIGS_PROJBUILD=${kconfigs_projbuild}"
--env "IDF_CMAKE=y")
# Generate the menuconfig target (uses C-based mconf tool, either prebuilt or via mconf target above)
# Generate the menuconfig target (uses C-based mconf-idf tool, either prebuilt or via mconf-idf target above)
add_custom_target(menuconfig
${menuconfig_depends}
# create any missing config file, with defaults if necessary
@ -93,6 +117,7 @@ function(kconfig_process_config)
COMMAND ${CMAKE_COMMAND} -E env
"COMPONENT_KCONFIGS=${kconfigs}"
"COMPONENT_KCONFIGS_PROJBUILD=${kconfigs_projbuild}"
"IDF_CMAKE=y"
"KCONFIG_CONFIG=${SDKCONFIG}"
${MCONF} ${ROOT_KCONFIG}
VERBATIM

View File

@ -9,7 +9,7 @@
#
function(set_default variable default_value)
if(NOT ${variable})
if($ENV{${variable}})
if(DEFINED ENV{${variable}} AND NOT "$ENV{${variable}}" STREQUAL "")
set(${variable} $ENV{${variable}} PARENT_SCOPE)
else()
set(${variable} ${default_value} PARENT_SCOPE)
@ -132,7 +132,7 @@ endmacro()
# Append a single line to the file specified
# The line ending is determined by the host OS
function(file_append_line file line)
if(ENV{MSYSTEM} OR CMAKE_HOST_WIN32)
if(DEFINED ENV{MSYSTEM} OR CMAKE_HOST_WIN32)
set(line_ending "\r\n")
else() # unix
set(line_ending "\n")

View File

@ -309,6 +309,54 @@ def fullclean(action, args):
else:
os.remove(f)
def print_closing_message(args):
# print a closing message of some kind
#
if "flash" in str(args.actions):
print("Done")
return
# Otherwise, if we built any binaries print a message about
# how to flash them
def print_flashing_message(title, key):
print("\n%s build complete. To flash, run this command:" % title)
with open(os.path.join(args.build_dir, "flasher_args.json")) as f:
flasher_args = json.load(f)
def flasher_path(f):
return os.path.relpath(os.path.join(args.build_dir, f))
if key != "project":
cmd = ""
if key == "bootloader":
cmd = " ".join(flasher_args["write_flash_args"]) + " "
cmd += flasher_args[key]["offset"] + " "
cmd += flasher_path(flasher_args[key]["file"])
else:
cmd = " ".join(flasher_args["write_flash_args"]) + " "
for o,f in flasher_args["flash_files"].items():
cmd += o + " " + flasher_path(f) + " "
print("%s -p %s -b %s write_flash %s" % (
os.path.relpath("%s/components/esptool_py/esptool/esptool.py" % os.environ["IDF_PATH"]),
args.port or "(PORT)",
args.baud,
cmd.strip()))
print("or run 'idf.py %s'" % (key + "-flash" if key != "project" else "flash",))
if "all" in args.actions or "build" in args.actions:
print_flashing_message("Project", "project")
else:
if "app" in args.actions:
print_flashing_message("App", "app")
if "partition_table" in args.actions:
print_flashing_message("Partition Table", "partition_table")
if "bootloader" in args.actions:
print_flashing_message("Bootloader", "bootloader")
ACTIONS = {
# action name : ( function (or alias), dependencies, order-only dependencies )
"all" : ( build_target, [], [ "reconfigure", "menuconfig", "clean", "fullclean" ] ),
@ -343,8 +391,10 @@ def get_commandline_options():
result.append(a)
return result
def main():
if sys.version_info[0] != 2 or sys.version_info[1] != 7:
raise FatalError("ESP-IDF currently only supports Python 2.7, and this is Python %d.%d.%d. Search for 'Setting the Python Interpreter' in the ESP-IDF docs for some tips to handle this." % sys.version_info[:3])
parser = argparse.ArgumentParser(description='ESP-IDF build management tool')
parser.add_argument('-p', '--port', help="Serial port",
default=os.environ.get('ESPPORT', None))
@ -391,10 +441,12 @@ def main():
completed_actions.add(action)
while len(args.actions) > 0:
execute_action(args.actions[0], args.actions[1:])
args.actions.pop(0)
actions = list(args.actions)
while len(actions) > 0:
execute_action(actions[0], actions[1:])
actions.pop(0)
print_closing_message(args)
if __name__ == "__main__":
try:

View File

@ -3,8 +3,8 @@
# esp-idf serial output monitor tool. Does some helpful things:
# - Looks up hex addresses in ELF file with addr2line
# - Reset ESP32 via serial RTS line (Ctrl-T Ctrl-R)
# - Run "make/idf.py flash" (Ctrl-T Ctrl-F)
# - Run "make/idf.py app-flash" (Ctrl-T Ctrl-A)
# - Run "make (or idf.py) flash" (Ctrl-T Ctrl-F)
# - Run "make (or idf.py) app-flash" (Ctrl-T Ctrl-A)
# - If gdbstub output is detected, gdb is automatically loaded
#
# Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD

View File

@ -16,7 +16,9 @@ gconf.glade.h
# configuration programs
#
conf
conf-idf
mconf
mconf-idf
nconf
qconf
gconf

View File

@ -43,7 +43,7 @@ endif
endif # MING32
endif # MSYSTEM
default: mconf conf
default: mconf-idf conf-idf
xconfig: qconf
$< $(silent) $(Kconfig)
@ -51,41 +51,41 @@ xconfig: qconf
gconfig: gconf
$< $(silent) $(Kconfig)
menuconfig: mconf
menuconfig: mconf-idf
$< $(silent) $(Kconfig)
config: conf
config: conf-idf
$< $(silent) --oldaskconfig $(Kconfig)
nconfig: nconf
$< $(silent) $(Kconfig)
silentoldconfig: conf
silentoldconfig: conf-idf
mkdir -p include/config include/generated
$< $(silent) --$@ $(Kconfig)
localyesconfig localmodconfig: streamline_config.pl conf
localyesconfig localmodconfig: streamline_config.pl conf-idf
mkdir -p include/config include/generated
perl $< --$@ . $(Kconfig) > .tmp.config
if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
mv -f .tmp.config .config; \
conf $(silent) --silentoldconfig $(Kconfig); \
conf-idf $(silent) --silentoldconfig $(Kconfig); \
mv -f .config.old.1 .config.old) \
else \
mv -f .tmp.config .config; \
conf $(silent) --silentoldconfig $(Kconfig); \
conf-idf $(silent) --silentoldconfig $(Kconfig); \
fi
rm -f .tmp.config
# These targets map 1:1 to the commandline options of 'conf'
# These targets map 1:1 to the commandline options of 'conf-idf'
simple-targets := oldconfig allnoconfig allyesconfig allmodconfig \
alldefconfig randconfig listnewconfig olddefconfig
PHONY += $(simple-targets)
$(simple-targets): conf
$(simple-targets): conf-idf
$< $(silent) --$@ $(Kconfig)
PHONY += oldnoconfig savedefconfig defconfig
@ -95,10 +95,10 @@ PHONY += oldnoconfig savedefconfig defconfig
# counter-intuitive name.
oldnoconfig: olddefconfig
savedefconfig: conf
savedefconfig: conf-idf
$< $(silent) --$@=defconfig $(Kconfig)
defconfig: conf
defconfig: conf-idf
ifeq ($(KBUILD_DEFCONFIG),)
$< $(silent) --defconfig $(Kconfig)
else
@ -111,12 +111,12 @@ else
endif
endif
%_defconfig: conf
%_defconfig: conf-idf
$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
configfiles=$(wildcard $(srctree)/kernel/configs/$@ $(srctree)/arch/$(SRCARCH)/configs/$@)
%.config: conf
%.config: conf-idf
$(if $(call configfiles),, $(error No configuration exists for this target on this architecture))
$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m .config $(configfiles)
+yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
@ -178,10 +178,10 @@ lxdialog/%.o: $(SRCDIR)/lxdialog/%.c
# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf: Used for defconfig, oldconfig and related targets
# conf-idf: Used for defconfig, oldconfig and related targets
# nconf: Used for the nconfig target.
# Utilizes ncurses
# mconf: Used for the menuconfig target
# mconf-idf: Used for the menuconfig target
# Utilizes the lxdialog package
# qconf: Used for the xconfig target
# Based on Qt which needs to be installed to compile it
@ -200,14 +200,15 @@ qconf-cxxobjs := qconf.o
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
hostprogs-y := conf nconf mconf kxgettext qconf gconf
hostprogs-y := conf-idf nconf mconf-idf kxgettext qconf gconf
all-objs := $(conf-objs) $(mconf-objs) $(lxdialog)
all-deps := $(all-objs:.o=.d)
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
clean-files += $(all-objs) $(all-deps) conf mconf
clean-files += $(all-objs) $(all-deps) conf-idf mconf-idf conf mconf
# (note: cleans both mconf & conf (old names) and conf-idf & mconf-idf (new names))
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
PHONY += dochecklxdialog
@ -324,10 +325,10 @@ gconf.glade.h: gconf.glade
gconf.glade
mconf: lxdialog $(mconf-objs)
mconf-idf: lxdialog $(mconf-objs)
$(CC) -o $@ $(mconf-objs) $(LOADLIBES_mconf)
conf: $(conf-objs)
conf-idf: $(conf-objs)
$(CC) -o $@ $(conf-objs) $(LOADLIBES_conf)
zconf.tab.c: zconf.lex.c

View File

@ -980,11 +980,17 @@ static int handle_exit(void)
}
/* fall through */
case -1:
if (!silent)
if (!silent) {
const char *is_cmake = getenv("IDF_CMAKE");
const char *build_msg;
if (is_cmake && is_cmake[0] == 'y')
build_msg = _("Ready to use CMake (or 'idf.py build') to build the project.");
else
build_msg = _("Execute 'make' to start the build or try 'make help'.");
printf(_("\n\n"
"*** End of the configuration.\n"
"*** Execute 'make' to start the build or try 'make help'."
"\n\n"));
"*** %s\n\n"), build_msg);
}
res = 0;
break;
default:

View File

@ -924,7 +924,7 @@ class Kconfig(object):
def write_node(node):
item = node.item
if isinstance(item, Symbol):
if isinstance(item, Symbol) and item.env_var is None:
config_string = item.config_string
if config_string:
write(config_string)

View File

@ -13,14 +13,14 @@ set -e
cd `dirname $0`
pushd dl
wget --continue "https://dl.espressif.com/dl/xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip"
wget --continue "https://github.com/espressif/kconfig-frontends/releases/download/v4.6.0.0-idf-20180319/mconf-v4.6.0.0-idf-20180319-win32.zip"
wget --continue "https://github.com/espressif/kconfig-frontends/releases/download/v4.6.0.0-idf-20180525/mconf-v4.6.0.0-idf-20180525-win32.zip"
wget --continue "https://github.com/ninja-build/ninja/releases/download/v1.8.2/ninja-win.zip"
popd
rm -rf input/*
pushd input
unzip ../dl/xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip
unzip ../dl/mconf-v4.6.0.0-idf-20180319-win32.zip
unzip ../dl/mconf-v4.6.0.0-idf-20180525-win32.zip
unzip ../dl/ninja-win.zip
popd

View File

@ -2,8 +2,8 @@
[Setup]
AppName=ESP-IDF Tools
AppVersion=1.0
OutputBaseFilename=esp-idf-tools-setup-1.0
AppVersion=1.1
OutputBaseFilename=esp-idf-tools-setup-1.1
DefaultDirName={pf}\Espressif\ESP-IDF Tools
DefaultGroupName=ESP-IDF Tools
@ -22,7 +22,7 @@ Name: "custom"; Description: "Custom installation"; Flags: iscustom
[Components]
Name: toolchain; Description: ESP32 Xtensa GCC Cross-Toolchain; Types: full custom;
Name: mconf; Description: ESP-IDF console menuconfig tool; Types: full custom;
Name: mconf_idf; Description: ESP-IDF console menuconfig tool; Types: full custom;
Name: ninja; Description: Install Ninja build v1.8.2; Types: full custom
[Tasks]
@ -42,7 +42,7 @@ Name: python64; Description: Download and Run Python 2.7.14 Installer and instal
[Files]
Components: toolchain; Source: "input\xtensa-esp32-elf\*"; DestDir: "{app}\toolchain\"; Flags: recursesubdirs;
Components: mconf; Source: "input\mconf-v4.6.0.0-idf-20180319-win32\*"; DestDir: "{app}\mconf\";
Components: mconf_idf; Source: "input\mconf-v4.6.0.0-idf-20180525-win32\*"; DestDir: "{app}\mconf-idf\";
Components: ninja; Source: "input\ninja.exe"; DestDir: "{app}";
[Run]
@ -61,13 +61,13 @@ Root: HKCU; Subkey: "Environment"; \
ValueType: expandsz; ValueName: "Path"; ValueData: "{app};{olddata}"; Check: not IsInPath('{app}'); \
Components: ninja; Tasks: addpath\user
; mconf path
; mconf-idf path
Root: HKLM; Subkey: "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"; \
ValueType: expandsz; ValueName: "Path"; ValueData: "{app}\mconf;{olddata}"; Check: not IsInPath('{app}\mconf'); \
Components: mconf; Tasks: addpath\allusers
ValueType: expandsz; ValueName: "Path"; ValueData: "{app}\mconf-idf;{olddata}"; Check: not IsInPath('{app}\mconf-idf'); \
Components: mconf_idf; Tasks: addpath\allusers
Root: HKCU; Subkey: "Environment"; \
ValueType: expandsz; ValueName: "Path"; ValueData: "{app}\mconf;{olddata}"; Check: not IsInPath('{app}\mconf'); \
Components: mconf; Tasks: addpath\user
ValueType: expandsz; ValueName: "Path"; ValueData: "{app}\mconf-idf;{olddata}"; Check: not IsInPath('{app}\mconf-idf'); \
Components: mconf_idf; Tasks: addpath\user
; toolchain path
Root: HKLM; Subkey: "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"; \