feat: enable RSA support for c5

This commit enables RSA peripheral support for ESP32-C5.
This commit is contained in:
nilesh.kale 2024-02-22 15:47:27 +05:30
parent 5e47ed70c2
commit ef3b40c5f1
4 changed files with 221 additions and 4 deletions

View File

@ -0,0 +1,180 @@
/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include <string.h>
#include <sys/param.h>
#include "hal/assert.h"
#include "hal/mpi_types.h"
#include "soc/pcr_reg.h"
#include "soc/pcr_struct.h"
#include "soc/rsa_reg.h"
#include "soc/mpi_periph.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Enable the bus clock for MPI peripheral module
*
* @param enable true to enable the module, false to disable the module
*/
static inline void mpi_ll_enable_bus_clock(bool enable)
{
PCR.rsa_conf.rsa_clk_en = enable;
}
/**
* @brief Reset the MPI peripheral module
*/
static inline void mpi_ll_reset_register(void)
{
PCR.rsa_conf.rsa_rst_en = 1;
PCR.rsa_conf.rsa_rst_en = 0;
// Clear reset on digital signature also, otherwise RSA is held in reset
PCR.ds_conf.ds_rst_en = 0;
PCR.ecdsa_conf.ecdsa_rst_en = 0;
}
static inline size_t mpi_ll_calculate_hardware_words(size_t words)
{
return words;
}
static inline void mpi_ll_clear_power_control_bit(void)
{
REG_CLR_BIT(PCR_RSA_PD_CTRL_REG, PCR_RSA_MEM_PD);
}
static inline void mpi_ll_set_power_control_bit(void)
{
REG_SET_BIT(PCR_RSA_PD_CTRL_REG, PCR_RSA_MEM_PD);
}
static inline void mpi_ll_enable_interrupt(void)
{
REG_WRITE(RSA_INT_ENA_REG, 1);
}
static inline void mpi_ll_disable_interrupt(void)
{
REG_WRITE(RSA_INT_ENA_REG, 0);
}
static inline void mpi_ll_clear_interrupt(void)
{
REG_WRITE(RSA_INT_CLR_REG, 1);
}
static inline bool mpi_ll_check_memory_init_complete(void)
{
return REG_READ(RSA_QUERY_CLEAN_REG) == 0;
}
static inline void mpi_ll_start_op(mpi_op_t op)
{
REG_WRITE(MPI_LL_OPERATIONS[op], 1);
}
static inline bool mpi_ll_get_int_status(void)
{
return REG_READ(RSA_QUERY_IDLE_REG) == 0;
}
/* Copy MPI bignum (p) to hardware memory block at 'mem_base'.
If num_words is higher than the number of words (n) in the bignum then
these additional words will be zeroed in the memory buffer.
*/
static inline void mpi_ll_write_to_mem_block(mpi_param_t param, size_t offset, const uint32_t* p, size_t n, size_t num_words)
{
uint32_t mem_base = MPI_LL_BLOCK_BASES[param] + offset;
uint32_t* pbase = (uint32_t*) mem_base;
uint32_t copy_words = MIN(num_words, n);
/* Copy MPI data to memory block registers */
for (int i = 0; i < copy_words; i++) {
pbase[i] = p[i];
}
/* Zero any remaining memory block data */
for (int i = copy_words; i < num_words; i++) {
pbase[i] = 0;
}
}
static inline void mpi_ll_write_m_prime(uint32_t Mprime)
{
REG_WRITE(RSA_M_PRIME_REG, Mprime);
}
static inline void mpi_ll_write_rinv(uint32_t rinv)
{
REG_WRITE(MPI_LL_BLOCK_BASES[MPI_PARAM_Z], rinv);
}
static inline void mpi_ll_write_at_offset(mpi_param_t param, int offset, uint32_t value)
{
uint32_t mem_base = MPI_LL_BLOCK_BASES[param] + offset;
REG_WRITE(mem_base, value);
}
/* Read MPI bignum (p) back from hardware memory block.
Reads z_words words from block.
*/
static inline void mpi_ll_read_from_mem_block(uint32_t* p, size_t n, size_t num_words)
{
uint32_t mem_base = MPI_LL_BLOCK_BASES[MPI_PARAM_Z];
/* Copy data from memory block registers */
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < num_words; i++) {
p[i] = REG_READ(mem_base + (i * REG_WIDTH));
}
/* Zero any remaining limbs in the bignum, if the buffer is bigger
than num_words */
for (size_t i = num_words; i < n; i++) {
p[i] = 0;
}
}
static inline void mpi_ll_set_mode(size_t length)
{
REG_WRITE(RSA_MODE_REG, length);
}
static inline void mpi_ll_disable_constant_time(void)
{
REG_WRITE(RSA_CONSTANT_TIME_REG, 0);
}
static inline void mpi_ll_enable_constant_time(void)
{
REG_WRITE(RSA_CONSTANT_TIME_REG, 1);
}
static inline void mpi_ll_disable_search(void)
{
REG_WRITE(RSA_SEARCH_ENABLE_REG, 0);
}
static inline void mpi_ll_enable_search(void)
{
REG_WRITE(RSA_SEARCH_ENABLE_REG, 1);
}
static inline void mpi_ll_set_search_position(size_t pos)
{
REG_WRITE(RSA_SEARCH_POS_REG, pos);
}
#ifdef __cplusplus
}
#endif

View File

@ -55,6 +55,14 @@ config SOC_SYSTIMER_SUPPORTED
bool
default y
config SOC_MPI_SUPPORTED
bool
default y
config SOC_RSA_SUPPORTED
bool
default y
config SOC_ECC_SUPPORTED
bool
default y
@ -339,6 +347,14 @@ config SOC_RMT_SUPPORT_XTAL
bool
default y
config SOC_MPI_MEM_BLOCKS_NUM
int
default 4
config SOC_MPI_OPERATIONS_NUM
int
default 3
config SOC_RSA_MAX_BIT_LEN
int
default 3072

View File

@ -46,9 +46,9 @@
#define SOC_I2C_SUPPORTED 1
#define SOC_SYSTIMER_SUPPORTED 1 // TODO: [ESP32C5] IDF-8707
// #define SOC_AES_SUPPORTED 1 // TODO: [ESP32C5] IDF-8627
// #define SOC_MPI_SUPPORTED 1
#define SOC_MPI_SUPPORTED 1
// #define SOC_SHA_SUPPORTED 1 // TODO: [ESP32C5] IDF-8624
// #define SOC_RSA_SUPPORTED 1 // TODO: [ESP32C5] IDF-8620
#define SOC_RSA_SUPPORTED 1
// #define SOC_HMAC_SUPPORTED 1 // TODO: [ESP32C5] IDF-8616
// #define SOC_DIG_SIGN_SUPPORTED 1 // TODO: [ESP32C5] IDF-8619
#define SOC_ECC_SUPPORTED 1
@ -341,8 +341,8 @@
// #define SOC_PARLIO_TX_RX_SHARE_INTERRUPT 1 /*!< TX and RX unit share the same interrupt source number */
/*--------------------------- MPI CAPS ---------------------------------------*/
// #define SOC_MPI_MEM_BLOCKS_NUM (4)
// #define SOC_MPI_OPERATIONS_NUM (3)
#define SOC_MPI_MEM_BLOCKS_NUM (4)
#define SOC_MPI_OPERATIONS_NUM (3)
/*--------------------------- RSA CAPS ---------------------------------------*/
#define SOC_RSA_MAX_BIT_LEN (3072)

View File

@ -0,0 +1,21 @@
/*
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/rsa_reg.h"
#include "soc/mpi_periph.h"
const uint32_t MPI_LL_BLOCK_BASES[4] = {
RSA_X_MEM,
RSA_Y_MEM,
RSA_Z_MEM,
RSA_M_MEM,
};
const uint32_t MPI_LL_OPERATIONS[3] = {
RSA_SET_START_MULT_REG,
RSA_SET_START_MODMULT_REG,
RSA_SET_START_MODEXP_REG,
};