alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

support c6 eco1 fosc calibration

Browse Source 
support c6 eco1 fosc calibration

support c6 eco1 fosc calibration

support c6 eco1 fosc calibration

Apply suggestion

Apply

support c6 eco1 fosc calibration

support c6 eco1 fosc calibration
This commit is contained in:
hongshuqing 2023-04-14 18:16:14 +08:00
parent c49c165bca
commit e3148369f3
4 changed files with 32 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/esp_hw_support/port/esp32c6/rtc_clk_init.c
View File

@ -73,6 +73,8 @@ void rtc_clk_init(rtc_clk_config_t cfg)
REGI2C_WRITE_MASK(I2C_DIG_REG, I2C_DIG_REG_SCK_DCAP, cfg.slow_clk_dcap);
REG_SET_FIELD(LP_CLKRST_RC32K_CNTL_REG, LP_CLKRST_RC32K_DFREQ, cfg.rc32k_dfreq);
clk_ll_rc_fast_tick_conf();
rtc_xtal_freq_t xtal_freq = cfg.xtal_freq;
esp_rom_uart_tx_wait_idle(0);
rtc_clk_xtal_freq_update(xtal_freq);

11
components/esp_hw_support/port/esp32c6/rtc_time.c
View File

@ -13,6 +13,8 @@
#include "soc/timer_group_reg.h"
#include "esp_rom_sys.h"
#include "assert.h"
#include "hal/efuse_hal.h"
#include "soc/chip_revision.h"
static const char *TAG = "rtc_time";
@ -130,6 +132,15 @@ uint32_t rtc_clk_cal_internal(rtc_cal_sel_t cal_clk, uint32_t slowclk_cycles)
while (true) {
if (GET_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_RDY)) {
cal_val = REG_GET_FIELD(TIMG_RTCCALICFG1_REG(0), TIMG_RTC_CALI_VALUE);
/*The Fosc CLK of calibration circuit is divided by 32 for ECO1.
So we need to multiply the frequency of the Fosc for ECO1 and above chips by 32 times.
And ensure that this modification will not affect ECO0.*/
if (ESP_CHIP_REV_ABOVE(efuse_hal_chip_revision(), 1)) {
if (cal_clk == RTC_CAL_RC_FAST) {
cal_val = cal_val >> 5;
}
}
break;
}
if (GET_PERI_REG_MASK(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT)) {

17
components/hal/esp32c6/include/hal/clk_tree_ll.h
View File

@ -40,6 +40,13 @@ extern "C" {
.dbuf = 1, \
}
/*
Set the frequency division factor of ref_tick
The FOSC of rtc calibration uses the 32 frequency division clock for ECO1,
So the frequency division factor of ref_tick must be greater than or equal to 32
*/
#define REG_FOSC_TICK_NUM 255
/**
* @brief XTAL32K_CLK enable modes
*/
@ -798,6 +805,16 @@ static inline __attribute__((always_inline)) uint32_t clk_ll_rtc_slow_load_cal(v
return REG_READ(RTC_SLOW_CLK_CAL_REG);
}
/*
Set the frequency division factor of ref_tick
*/
static inline void clk_ll_rc_fast_tick_conf(void)
{
PCR.ctrl_tick_conf.fosc_tick_num = REG_FOSC_TICK_NUM;
}
#ifdef __cplusplus
}
#endif

3
components/soc/esp32c6/include/soc/rtc.h
View File

@ -150,6 +150,7 @@ typedef struct rtc_cpu_freq_config_s {
#define RTC_VDDSDIO_TIEH_1_8V 0 //!< TIEH field value for 1.8V VDDSDIO
#define RTC_VDDSDIO_TIEH_3_3V 1 //!< TIEH field value for 3.3V VDDSDIO
/**
* @brief Clock source to be calibrated using rtc_clk_cal function
*
@ -177,7 +178,7 @@ typedef struct {
uint32_t clk_rtc_clk_div : 8;
uint32_t clk_8m_clk_div : 3; //!< RC_FAST clock divider (division is by clk_8m_div+1, i.e. 0 means ~20MHz frequency)
uint32_t slow_clk_dcap : 8; //!< RC_SLOW clock adjustment parameter (higher value leads to lower frequency)
uint32_t clk_8m_dfreq : 8; //!< RC_FAST clock adjustment parameter (higher value leads to higher frequency)
uint32_t clk_8m_dfreq : 10; //!< RC_FAST clock adjustment parameter (higher value leads to higher frequency)
uint32_t rc32k_dfreq : 10; //!< Internal RC32K clock adjustment parameter (higher value leads to higher frequency)
} rtc_clk_config_t;