Handle deprecated values in sdkconfig.defaults

The issue was pointed out also in
https://github.com/espressif/esp-idf/issues/4092

components/bt/host/bluedroid/common/include/common/bluedroid_user_config.h

@@ -22,8 +22,8 @@
 /**********************************************************
  * Thread/Task reference
  **********************************************************/
-#ifdef CONFIG_BTU_TASK_STACK_SIZE
+#ifdef CONFIG_BT_BTU_TASK_STACK_SIZE
-#define UC_BTU_TASK_STACK_SIZE              CONFIG_BTU_TASK_STACK_SIZE
+#define UC_BTU_TASK_STACK_SIZE              CONFIG_BT_BTU_TASK_STACK_SIZE
 #else
 #define UC_BTU_TASK_STACK_SIZE              4096
 #endif

components/esp32/spiram_psram.c

@@ -671,7 +671,7 @@ esp_err_t IRAM_ATTR psram_enable(psram_cache_mode_t mode, psram_vaddr_mode_t vad
 
         // If flash mode is set to QIO or QOUT, the WP pin is equal the value configured in bootloader.
         // If flash mode is set to DIO or DOUT, the WP pin should config it via menuconfig.
-        #if CONFIG_FLASHMODE_QIO || CONFIG_FLASHMODE_QOUT
+        #if CONFIG_ESPTOOLPY_FLASHMODE_QIO || CONFIG_FLASHMODE_QOUT
         psram_io.psram_spiwp_sd3_io = CONFIG_BOOTLOADER_SPI_WP_PIN;
         #else
         psram_io.psram_spiwp_sd3_io = CONFIG_SPIRAM_SPIWP_SD3_PIN;

examples/bluetooth/bluedroid/ble/ble_ancs/sdkconfig.defaults

@@ -1,6 +1,6 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=

examples/bluetooth/esp_ble_mesh/ble_mesh_client_model/sdkconfig.defaults

@@ -1,20 +1,20 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_GATTS_ENABLE=y
+CONFIG_BT_GATTS_ENABLE=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -44,4 +44,4 @@ CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
 CONFIG_BLE_MESH_CFG_CLI=
 CONFIG_BLE_MESH_GENERIC_ONOFF_CLI=y
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512

examples/bluetooth/esp_ble_mesh/ble_mesh_console/ble_mesh_node/sdkconfig.defaults

@@ -1,23 +1,23 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
-CONFIG_CONSOLE_UART_BAUDRATE=921600
+CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600
 CONFIG_ESPTOOLPY_BAUD_921600B=y
-CONFIG_MONITOR_BAUD_921600B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B=y
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_GATTS_ENABLE=y
+CONFIG_BT_GATTS_ENABLE=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -45,4 +45,4 @@ CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
 CONFIG_BLE_MESH_CFG_CLI=y
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512

examples/bluetooth/esp_ble_mesh/ble_mesh_console/ble_mesh_provisioner/sdkconfig.defaults

@@ -1,18 +1,18 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -37,6 +37,6 @@ CONFIG_BLE_MESH_TX_SEG_MSG_COUNT=6
 CONFIG_BLE_MESH_RX_SEG_MSG_COUNT=1
 CONFIG_BLE_MESH_RX_SDU_MAX=384
 CONFIG_BLE_MESH_TX_SEG_MAX=32
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_GENERIC_ONOFF_CLI=y

examples/bluetooth/esp_ble_mesh/ble_mesh_fast_provision/ble_mesh_fast_prov_client/sdkconfig.defaults

@@ -1,18 +1,18 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -32,7 +32,7 @@ CONFIG_BLE_MESH_GATT_PROXY=y
 CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_GENERIC_ONOFF_CLI=y
 CONFIG_BLE_MESH_ADV_BUF_COUNT=100

examples/bluetooth/esp_ble_mesh/ble_mesh_fast_provision/ble_mesh_fast_prov_server/sdkconfig.defaults

@@ -1,20 +1,20 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_GATTS_ENABLE=y
+CONFIG_BT_GATTS_ENABLE=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -40,7 +40,7 @@ CONFIG_BLE_MESH_GATT_PROXY=y
 CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_CRPL=60
 CONFIG_BLE_MESH_MSG_CACHE_SIZE=60

examples/bluetooth/esp_ble_mesh/ble_mesh_node/sdkconfig.defaults

@@ -1,20 +1,20 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_GATTS_ENABLE=y
+CONFIG_BT_GATTS_ENABLE=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -42,4 +42,4 @@ CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
 CONFIG_BLE_MESH_CFG_CLI=y
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512

examples/bluetooth/esp_ble_mesh/ble_mesh_provisioner/sdkconfig.defaults

@@ -1,18 +1,18 @@
 # Override some defaults so BT stack is enabled
 # by default in this example
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -37,6 +37,6 @@ CONFIG_BLE_MESH_TX_SEG_MSG_COUNT=6
 CONFIG_BLE_MESH_RX_SEG_MSG_COUNT=6
 CONFIG_BLE_MESH_RX_SDU_MAX=384
 CONFIG_BLE_MESH_TX_SEG_MAX=32
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_GENERIC_ONOFF_CLI=y

examples/bluetooth/esp_ble_mesh/ble_mesh_vendor_models/fast_prov_vendor_model/sdkconfig.defaults

@@ -20,7 +20,7 @@ CONFIG_BLE_MESH_GATT_PROXY=y
 CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_CRPL=60
 CONFIG_BLE_MESH_MSG_CACHE_SIZE=60

examples/bluetooth/esp_ble_mesh/ble_mesh_wifi_coexist/sdkconfig.defaults

@@ -5,20 +5,20 @@ CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
 CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240
 CONFIG_MEMMAP_SMP=y
 CONFIG_BT_ENABLED=y
-CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
+CONFIG_BTDM_CTRL_MODE_BLE_ONLY=y
-CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY=
+CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY=
-CONFIG_BTDM_CONTROLLER_MODE_BTDM=
+CONFIG_BTDM_CTRL_MODE_BTDM=
-CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=n
+CONFIG_BTDM_MODEM_SLEEP=n
-CONFIG_BLE_SCAN_DUPLICATE=y
+CONFIG_BTDM_BLE_SCAN_DUPL=y
-CONFIG_SCAN_DUPLICATE_TYPE=2
+CONFIG_BTDM_SCAN_DUPL_TYPE=2
-CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR=y
+CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE=y
-CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=200
-CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
+CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
-CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=200
+CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=200
-CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
+CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
-CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
+CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
-CONFIG_GATTS_ENABLE=y
+CONFIG_BT_GATTS_ENABLE=y
-CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
+CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL=y
 CONFIG_BLE_MESH=y
 CONFIG_BLE_MESH_HCI_5_0=y
 CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
@@ -40,7 +40,7 @@ CONFIG_BLE_MESH_GATT_PROXY=y
 CONFIG_BLE_MESH_RELAY=y
 CONFIG_BLE_MESH_LOW_POWER=
 CONFIG_BLE_MESH_FRIEND=
-CONFIG_BTU_TASK_STACK_SIZE=4512
+CONFIG_BT_BTU_TASK_STACK_SIZE=4512
 CONFIG_BLE_MESH_CFG_CLI=y
 CONFIG_BLE_MESH_GENERIC_ONOFF_CLI=y
 CONFIG_BLE_MESH_CRPL=60
@@ -53,7 +53,7 @@ CONFIG_BLE_MESH_TX_SEG_MAX=32
 CONFIG_BLE_MESH_NO_LOG=n
 CONFIG_BLE_MESH_STACK_TRACE_LEVEL=0
 
-CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4096
+CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096
 
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=16
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=64
@@ -66,17 +66,17 @@ CONFIG_ESP32_WIFI_RX_BA_WIN=32
 CONFIG_FREERTOS_UNICORE=
 CONFIG_FREERTOS_HZ=1000
 
-CONFIG_INT_WDT=
+CONFIG_ESP_INT_WDT=
-CONFIG_TASK_WDT=
+CONFIG_ESP_TASK_WDT=
 
-CONFIG_TCP_SND_BUF_DEFAULT=65534
+CONFIG_LWIP_TCP_SND_BUF_DEFAULT=65534
-CONFIG_TCP_WND_DEFAULT=65534
+CONFIG_LWIP_TCP_WND_DEFAULT=65534
-CONFIG_TCP_RECVMBOX_SIZE=64
+CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
-CONFIG_UDP_RECVMBOX_SIZE=64
+CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
-CONFIG_TCPIP_RECVMBOX_SIZE=64
+CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
 CONFIG_LWIP_ETHARP_TRUST_IP_MAC=
 
-CONFIG_FLASHMODE_QIO=y
+CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
 CONFIG_LWIP_IRAM_OPTIMIZATION=y
 

make/project_config.mk

@@ -46,6 +46,16 @@ $(SDKCONFIG): defconfig
 endif
 endif
 
+ifneq ("$(wildcard $(SDKCONFIG_DEFAULTS))","")
+ifeq ($(OS),Windows_NT)
+DEFAULTS_ARG:=--defaults $(shell cygpath -m $(SDKCONFIG_DEFAULTS))
+else
+DEFAULTS_ARG:=--defaults $(SDKCONFIG_DEFAULTS)
+endif
+else
+DEFAULTS_ARG:=
+endif
+
 # macro for running confgen.py
 define RunConfGen
 	mkdir -p $(BUILD_DIR_BASE)/include/config
@@ -57,6 +67,7 @@ define RunConfGen
 		--env "COMPONENT_KCONFIGS_PROJBUILD=$(strip $(COMPONENT_KCONFIGS_PROJBUILD))" \
 		--env "COMPONENT_SDKCONFIG_RENAMES=$(strip $(COMPONENT_SDKCONFIG_RENAMES))" \
 		--env "IDF_CMAKE=n" \
+		$(DEFAULTS_ARG) \
 		--output config ${SDKCONFIG} \
 		--output makefile $(SDKCONFIG_MAKEFILE) \
 		--output header $(BUILD_DIR_BASE)/include/sdkconfig.h
@@ -106,9 +117,6 @@ endif
 # defconfig creates a default config, based on SDKCONFIG_DEFAULTS if present
 defconfig: | check_python_dependencies
 	$(summary) DEFCONFIG
-ifneq ("$(wildcard $(SDKCONFIG_DEFAULTS))","")
-	cat $(SDKCONFIG_DEFAULTS) >> $(SDKCONFIG)  # append defaults to sdkconfig, will override existing values
-endif
 	$(call RunConfGen)
 
 # if neither defconfig or menuconfig are requested, use the GENCONFIG rule to

tools/ci/check_deprecated_kconfigs.py

@@ -0,0 +1,99 @@
+#!/usr/bin/env python
+#
+# Copyright 2019 Espressif Systems (Shanghai) PTE LTD
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from __future__ import print_function
+from __future__ import unicode_literals
+import argparse
+import os
+import sys
+from io import open
+
+# FILES_TO_CHECK used as "startswith" pattern to match sdkconfig.defaults variants
+FILES_TO_CHECK = ('sdkconfig.ci', 'sdkconfig.defaults')
+
+# ignored directories (makes sense only when run on IDF_PATH)
+# Note: IGNORE_DIRS is a tuple in order to be able to use it directly with the startswith() built-in function which
+# accepts tuples but no lists.
+IGNORE_DIRS = (
+)
+
+
+def _parse_path(path, sep=' '):
+    ret = set()
+    with open(path, 'r', encoding='utf-8') as f:
+        for line in f:
+            line = line.strip()
+            if not line.startswith('#') and len(line) > 0:
+                ret.add(line.split(sep)[0])
+    return ret
+
+
+def _valid_directory(path):
+    if not os.path.isdir(path):
+        raise argparse.ArgumentTypeError("{} is not a valid directory!".format(path))
+    return path
+
+
+def main():
+    default_path = os.getenv('IDF_PATH', None)
+
+    parser = argparse.ArgumentParser(description='Kconfig options checker')
+    parser.add_argument('--directory', '-d', help='Path to directory to check recursively  '
+                        '(for example $IDF_PATH)',
+                        type=_valid_directory,
+                        required=default_path is None,
+                        default=default_path)
+    args = parser.parse_args()
+
+    # IGNORE_DIRS makes sense when the required directory is IDF_PATH
+    check_ignore_dirs = default_path is not None and os.path.abspath(args.directory) == os.path.abspath(default_path)
+
+    ignores = 0
+    files_to_check = []
+    deprecated_options = set()
+    errors = []
+
+    for root, dirnames, filenames in os.walk(args.directory):
+        for filename in filenames:
+            full_path = os.path.join(root, filename)
+            path_in_idf = os.path.relpath(full_path, args.directory)
+
+            if filename.startswith(FILES_TO_CHECK):
+                if check_ignore_dirs and path_in_idf.startswith(IGNORE_DIRS):
+                    print('{}: Ignored'.format(path_in_idf))
+                    ignores += 1
+                    continue
+                files_to_check.append(full_path)
+            elif filename == 'sdkconfig.rename':
+                deprecated_options |= _parse_path(full_path)
+
+    for path in files_to_check:
+        used_options = _parse_path(path, '=')
+        used_deprecated_options = deprecated_options & used_options
+        if len(used_deprecated_options) > 0:
+            errors.append('{}: The following options are deprecated: {}'.format(path,
+                                                                                ', '.join(used_deprecated_options)))
+
+    if ignores > 0:
+        print('{} files have been ignored.'.format(ignores))
+
+    if len(errors) > 0:
+        print('\n\n'.join(errors))
+        sys.exit(1)
+
+
+if __name__ == "__main__":
+    main()

tools/ci/config/check.yml

@@ -69,6 +69,11 @@ check_kconfigs:
     - ${IDF_PATH}/tools/ci/multirun_with_pyenv.sh ${IDF_PATH}/tools/test_check_kconfigs.py
     - ${IDF_PATH}/tools/check_kconfigs.py
 
+check_deprecated_kconfig_options:
+  extends: .check_job_template_with_filter
+  script:
+    - ${IDF_PATH}/tools/ci/check_deprecated_kconfigs.py
+
 check_ut_cmake_make:
   extends: .check_job_template_with_filter
   stage: check

tools/ci/executable-list.txt

@@ -34,6 +34,7 @@ tools/ci/build_examples.sh
 tools/ci/build_examples_cmake.sh
 tools/ci/check-executable.sh
 tools/ci/check-line-endings.sh
+tools/ci/check_deprecated_kconfigs.py
 tools/ci/check_examples_cmake_make.sh
 tools/ci/check_idf_version.sh
 tools/ci/check_ut_cmake_make.sh

tools/ci/test_build_system.sh

@@ -350,7 +350,28 @@ endmenu\n" >> ${IDF_PATH}/Kconfig;
     pushd ${IDF_PATH}
     git checkout -- sdkconfig.rename Kconfig
     popd
-    make defconfig
+
+    print_status "Handling deprecated Kconfig options in sdkconfig.defaults"
+    make clean;
+    rm -f sdkconfig;
+    echo "CONFIG_TEST_OLD_OPTION=7" > sdkconfig.defaults;
+    echo "CONFIG_TEST_OLD_OPTION CONFIG_TEST_NEW_OPTION" > ${IDF_PATH}/sdkconfig.rename;
+    echo -e "\n\
+menu \"test\"\n\
+    config TEST_NEW_OPTION\n\
+        int \"TEST_NEW_OPTION\"\n\
+        range 0 10\n\
+        default 5\n\
+        help\n\
+            TEST_NEW_OPTION description\n\
+endmenu\n" >> ${IDF_PATH}/Kconfig;
+    make defconfig > /dev/null;
+    grep "CONFIG_TEST_OLD_OPTION=7" sdkconfig || failure "CONFIG_TEST_OLD_OPTION=7 should be in sdkconfig for backward compatibility"
+    grep "CONFIG_TEST_NEW_OPTION=7" sdkconfig || failure "CONFIG_TEST_NEW_OPTION=7 should be in sdkconfig"
+    rm -f sdkconfig.defaults;
+    pushd ${IDF_PATH}
+    git checkout -- sdkconfig.rename Kconfig
+    popd
 
     print_status "All tests completed"
     if [ -n "${FAILURES}" ]; then

tools/ci/test_build_system_cmake.sh

@@ -438,6 +438,28 @@ endmenu\n" >> ${IDF_PATH}/Kconfig;
     git checkout -- sdkconfig.rename Kconfig
     popd
 
+    print_status "Handling deprecated Kconfig options in sdkconfig.defaults"
+    idf.py clean;
+    rm -f sdkconfig;
+    echo "CONFIG_TEST_OLD_OPTION=7" > sdkconfig.defaults;
+    echo "CONFIG_TEST_OLD_OPTION CONFIG_TEST_NEW_OPTION" > ${IDF_PATH}/sdkconfig.rename;
+    echo -e "\n\
+menu \"test\"\n\
+    config TEST_NEW_OPTION\n\
+        int \"TEST_NEW_OPTION\"\n\
+        range 0 10\n\
+        default 5\n\
+        help\n\
+            TEST_NEW_OPTION description\n\
+endmenu\n" >> ${IDF_PATH}/Kconfig;
+    idf.py build > /dev/null;
+    grep "CONFIG_TEST_OLD_OPTION=7" sdkconfig || failure "CONFIG_TEST_OLD_OPTION=7 should be in sdkconfig for backward compatibility"
+    grep "CONFIG_TEST_NEW_OPTION=7" sdkconfig || failure "CONFIG_TEST_NEW_OPTION=7 should be in sdkconfig"
+    rm -f sdkconfig.defaults;
+    pushd ${IDF_PATH}
+    git checkout -- sdkconfig.rename Kconfig
+    popd
+
     print_status "Confserver can be invoked by idf.py"
     echo '{"version": 1}' | idf.py confserver || failure "Couldn't load confserver"
 

tools/kconfig_new/confgen.py

@@ -227,6 +227,10 @@ def main():
     config.disable_redun_warnings()
     config.disable_override_warnings()
 
+    sdkconfig_renames = [args.sdkconfig_rename] if args.sdkconfig_rename else []
+    sdkconfig_renames += os.environ.get("COMPONENT_SDKCONFIG_RENAMES", "").split()
+    deprecated_options = DeprecatedOptions(config.config_prefix, path_rename_files=sdkconfig_renames)
+
     if len(args.defaults) > 0:
         # always load defaults first, so any items which are not defined in that config
         # will have the default defined in the defaults file
@@ -234,11 +238,16 @@ def main():
             print("Loading defaults file %s..." % name)
             if not os.path.exists(name):
                 raise RuntimeError("Defaults file not found: %s" % name)
-            config.load_config(name, replace=False)
+            try:
-
+                with tempfile.NamedTemporaryFile(prefix="confgen_tmp", delete=False) as f:
-    sdkconfig_renames = [args.sdkconfig_rename] if args.sdkconfig_rename else []
+                    temp_file = f.name
-    sdkconfig_renames += os.environ.get("COMPONENT_SDKCONFIG_RENAMES", "").split()
+                deprecated_options.replace(sdkconfig_in=name, sdkconfig_out=temp_file)
-    deprecated_options = DeprecatedOptions(config.config_prefix, path_rename_files=sdkconfig_renames)
+                config.load_config(temp_file, replace=False)
+            finally:
+                try:
+                    os.remove(temp_file)
+                except OSError:
+                    pass
 
     # If config file previously exists, load it
     if args.config and os.path.exists(args.config):