alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-20 00:36:01 -04:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

rtcio: Add a test case to test RTCIO's hold ability after deep sleep wakeup

Browse Source
This commit is contained in:
Song Ruo Jing 2022-10-27 14:52:23 +08:00
parent a05e8996ab
commit dd311381a4
2 changed files with 51 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
components/driver/test_apps/gpio/main/test_rtcio.c
View File

@ -304,3 +304,52 @@ TEST_CASE("RTCIO_output_hold_test", "[rtcio]")
}
ESP_LOGI(TAG, "RTCIO hold test over");
}
// It is not necessary to test every rtcio pin, it will take too much ci testing time for deep sleep
// Only tests on s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX] pin
// (ESP32: IO25, ESP32S2, S3: IO6) these pads' default configuration is low level
#define TEST_RTCIO_DEEP_SLEEP_PIN_INDEX 5
static void rtcio_deep_sleep_hold_test_first_stage(void)
{
printf("configure rtcio pin to hold during deep sleep");
int io_num = s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX];
TEST_ESP_OK(esp_sleep_enable_timer_wakeup(2000000));
gpio_config_t io_conf = {
.intr_type = GPIO_INTR_DISABLE,
.mode = GPIO_MODE_INPUT_OUTPUT,
.pin_bit_mask = (1ULL << io_num),
.pull_down_en = 0,
.pull_up_en = 0,
};
gpio_config(&io_conf);
gpio_set_level(io_num, 1);
// Enable global persistence
TEST_ESP_OK(gpio_hold_en(io_num));
esp_deep_sleep_start();
}
static void rtcio_deep_sleep_hold_test_second_stage(void)
{
int io_num = s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX];
// Check reset reason is waking up from deepsleep
TEST_ASSERT_EQUAL(ESP_RST_DEEPSLEEP, esp_reset_reason());
// Pin should stay at high level after the deep sleep
TEST_ASSERT_EQUAL_INT(1, gpio_get_level(io_num));
gpio_hold_dis(io_num);
}
/*
* Test rtcio hold function during deep sleep.
* This test case can only check the hold state after waking up from deep sleep
* If you want to check that the rtcio hold function works properly during deep sleep,
* please use logic analyzer or oscillscope
*/
TEST_CASE_MULTIPLE_STAGES("RTCIO_deep_sleep_output_hold_test", "[rtcio]",
rtcio_deep_sleep_hold_test_first_stage,
rtcio_deep_sleep_hold_test_second_stage)

7
components/driver/test_apps/gpio/pytest_gpio.py
View File

@ -2,7 +2,6 @@
# SPDX-License-Identifier: CC0-1.0
import pytest
from pytest_embedded import Dut
@pytest.mark.supported_targets
@ -15,7 +14,5 @@ from pytest_embedded import Dut
],
indirect=True,
)
def test_gpio(dut: Dut) -> None:
dut.expect_exact('Press ENTER to see the list of tests')
dut.write('*')
dut.expect_unity_test_output(timeout=300)
def test_gpio(case_tester) -> None: # type: ignore
case_tester.run_all_cases(timeout=300)