Merge branch 'bugfix/support_cert_test' into 'master'

All chip support cert_test

Closes WIFI-5432, IDFGH-12197, and IDFHG-10756

See merge request espressif/esp-idf!27977

components/esp_phy/CMakeLists.txt

@@ -73,6 +73,19 @@ if(CONFIG_ESP_PHY_ENABLED)
 
         idf_component_get_property(esp_phy_lib esp_phy COMPONENT_LIB)
 
+        if(CONFIG_ESP_PHY_ENABLE_CERT_TEST)
+            if(CONFIG_IDF_TARGET_ESP32)
+                target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
+                librftest.a $<TARGET_FILE:${esp_phy_lib}>)
+            elseif(CONFIG_IDF_TARGET_ESP32S2)
+                target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> librftest.a
+                librfate.a $<TARGET_FILE:${esp_phy_lib}>)
+            else()
+                target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
+                librfate.a librftest.a $<TARGET_FILE:${esp_phy_lib}>)
+            endif()
+        endif()
+
         if(CONFIG_IDF_TARGET_ESP32)
             target_link_libraries(${COMPONENT_LIB} PUBLIC rtc)
             target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a librtc.a
@@ -85,11 +98,6 @@ if(CONFIG_ESP_PHY_ENABLED)
             target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libphy.a
             $<TARGET_FILE:${esp_phy_lib}>)
         endif()
-
-    if(CONFIG_ESP_PHY_ENABLE_CERT_TEST)
-        target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${esp_phy_lib}> libbttestmode.a
-        librfate.a librftest.a $<TARGET_FILE:${esp_phy_lib}>)
-    endif()
     endif()
 
    if(CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION)

components/esp_phy/Kconfig

@@ -130,7 +130,6 @@ menu "PHY"
         config ESP_PHY_ENABLE_CERT_TEST
             bool "Enable RF certification test functions"
             default n
-            depends on IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
             help
                 If enabled, you can use RF certification test APIs.
 

components/esp_phy/include/esp_phy_cert_test.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -63,7 +63,7 @@ typedef struct {
     uint32_t phy_rx_correct_count; /*!< The number of desired packets received */
     int phy_rx_rssi;               /*!< Average RSSI of desired packets */
     uint32_t phy_rx_total_count;   /*!< The number of total packets received */
-    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the lastest Wi-Fi RX info; 2 means the lastest BLE RX info. */
+    uint32_t phy_rx_result_flag;   /*!< 0 means no RX info; 1 means the latest Wi-Fi RX info; 2 means the latest BLE RX info. */
 } esp_phy_rx_result_t;
 
 /**
@@ -120,7 +120,7 @@ void esp_phy_cbw40m_en(bool en);
 void esp_phy_wifi_tx(uint32_t chan, esp_phy_wifi_rate_t rate, int8_t backoff, uint32_t length_byte, uint32_t packet_delay, uint32_t packet_num);
 
 /**
- * @brief Test start/stop command, used to stop transmitting or reciving state.
+ * @brief Test start/stop command, used to stop transmitting or receiving state.
  *
  * @param value:
  *     Value should be set to 3 before TX/RX.

components/esp_phy/lib

@@ -1 +1 @@
-Subproject commit b526a0d7204fb36cb322ead9b1096ffd6a097dc9
+Subproject commit 8608fcf54d51e81f2e74ebf335fa33f61953f7c8

examples/phy/.build-test-rules.yml

@@ -8,7 +8,9 @@ examples/phy/antenna:
     - if: IDF_TARGET in ["esp32p4", "esp32h2"]
       reason: not supported
 examples/phy/cert_test:
-  enable:
-    - if: IDF_TARGET in ["esp32c3", "esp32s3"]
+  disable:
+    - if: IDF_TARGET in ["esp32p4"]
+      reason: not supported
+    - if: IDF_TARGET in ["esp32c5", "esp32c61"]
       temporary: true
-      reason: the other targets are not tested yet
+      reason: not supported yet  # TODO: [ESP32C5] IDF-8851

examples/phy/cert_test/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C3 | ESP32-S3 |
-| ----------------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-S2 | ESP32-S3 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
 
 # Certification Test Example
 

examples/phy/cert_test/main/cert_test.c

@@ -38,7 +38,9 @@ void app_main(void)
     register_phy_cmd();
 
     /* rftest.a requirements */
+#ifndef CONFIG_IDF_TARGET_ESP32H2
     esp_wifi_power_domain_on();
+#endif
 
     esp_phy_rftest_config(1);
     esp_phy_rftest_init();

examples/phy/cert_test/sdkconfig.defaults

@@ -2,3 +2,4 @@ CONFIG_ESP_TASK_WDT_EN=n
 
 CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_ENABLE_CERT_TEST=y
+CONFIG_BT_ENABLED=y

examples/phy/cert_test/sdkconfig.defaults.esp32s3

@@ -0,0 +1,4 @@
+#
+# ESP32S3-specific
+#
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096