alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

Merge branch 'bugfix/fix_dig_gpio_unable_hold_bug_v3.2' into 'release/v3.2'

Browse Source 
Bugfix/fix digital gpio unable hold bug  (backport v3.2)

See merge request idf/esp-idf!4355
This commit is contained in:
Angus Gratton 2019-03-06 12:10:38 +08:00
commit d99d92e170
2 changed files with 46 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
components/driver/gpio.c
View File

@ -539,6 +539,20 @@ esp_err_t gpio_hold_dis(gpio_num_t gpio_num)
return r == ESP_OK ? ESP_OK : ESP_ERR_NOT_SUPPORTED;
}
void gpio_deep_sleep_hold_en(void)
{
portENTER_CRITICAL(&gpio_spinlock);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
portEXIT_CRITICAL(&gpio_spinlock);
}
void gpio_deep_sleep_hold_dis(void)
{
portENTER_CRITICAL(&gpio_spinlock);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
portEXIT_CRITICAL(&gpio_spinlock);
}
void gpio_iomux_in(uint32_t gpio, uint32_t signal_idx)
{
GPIO.func_in_sel_cfg[signal_idx].sig_in_sel = 0;

35
components/driver/include/driver/gpio.h
View File

@ -537,13 +537,17 @@ esp_err_t gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t streng
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength);
/**
* @brief Set gpio pad hold function.
* @brief Enable gpio pad hold function.
*
* The gpio pad hold function works in both input and output modes, but must be output-capable gpios.
* If pad hold enabled:
* in output mode: the output level of the pad will be force locked and can not be changed.
* in input mode: the input value read will not change, regardless the changes of input signal.
*
* The state of digital gpio cannot be held during Deep-sleep, and it will resume the hold function
* when the chip wakes up from Deep-sleep. If the digital gpio also needs to be held during Deep-sleep,
* `gpio_deep_sleep_hold_en` should also be called.
*
* Power down or call gpio_hold_dis will disable this function.
*
* @param gpio_num GPIO number, only support output-capable GPIOs
@ -555,7 +559,15 @@ esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* stren
esp_err_t gpio_hold_en(gpio_num_t gpio_num);
/**
* @brief Unset gpio pad hold function.
* @brief Disable gpio pad hold function.
*
* When the chip is woken up from Deep-sleep, the gpio will be set to the default mode, so, the gpio will output
* the default level if this function is called. If you dont't want the level changes, the gpio should be configured to
* a known state before this function is called.
* e.g.
* If you hold gpio18 high during Deep-sleep, after the chip is woken up and `gpio_hold_dis` is called,
* gpio18 will output low level(because gpio18 is input mode by default). If you don't want this behavior,
* you should configure gpio18 as output mode and set it to hight level before calling `gpio_hold_dis`.
*
* @param gpio_num GPIO number, only support output-capable GPIOs
*
@ -563,7 +575,24 @@ esp_err_t gpio_hold_en(gpio_num_t gpio_num);
* - ESP_OK Success
* - ESP_ERR_NOT_SUPPORTED Not support pad hold function
*/
esp_err_t gpio_hold_dis(gpio_num_t gpio_num);
esp_err_t gpio_hold_dis(gpio_num_t gpio_num);
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* When the chip is in Deep-sleep mode, all digital gpio will hold the state before sleep, and when the chip is woken up,
* the status of digital gpio will not be held. Note that the pad hold feature only works when the chip is in Deep-sleep mode,
* when not in sleep mode, the digital gpio state can be changed even you have called this function.
*
* Power down or call gpio_hold_dis will disable this function, otherwise, the digital gpio hold feature works as long as the chip enter Deep-sleep.
*/
void gpio_deep_sleep_hold_en(void);
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
*/
void gpio_deep_sleep_hold_dis(void);
/**
* @brief Set pad input to a peripheral signal through the IOMUX.