alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

spi_flash: New low-level flash API

Browse Source
This commit is contained in:
Angus Gratton 2017-05-24 12:35:12 +10:00 committed by bot
parent 21b04e7798
commit ce4de867d6
12 changed files with 2052 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
components/esp32/cpu_start.c
View File

@ -43,6 +43,7 @@
#include "sdkconfig.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "spi_flash_lowlevel.h"
#include "nvs_flash.h"
#include "esp_event.h"
#include "esp_spi_flash.h"
@ -388,6 +389,9 @@ void start_cpu0_default(void)
spi_flash_init();
/* init default OS-aware flash access critical section */
spi_flash_guard_set(&g_flash_guard_default_ops);
/* Todo the following needs to be properly integrated */
esp_flash_low_level_app_init();
esp_flash_init_default_chip();
#ifdef CONFIG_PM_ENABLE
esp_pm_impl_init();
#ifdef CONFIG_PM_DFS_INIT_AUTO
@ -399,7 +403,6 @@ void start_cpu0_default(void)
esp_pm_configure(&cfg);
#endif //CONFIG_PM_DFS_INIT_AUTO
#endif //CONFIG_PM_ENABLE
#if CONFIG_ESP32_ENABLE_COREDUMP
esp_core_dump_init();
size_t core_data_sz = 0;

265
components/spi_flash/include/spi_flash_lowlevel.h Normal file
View File

@ -0,0 +1,265 @@
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/spi_struct.h"
struct esp_flash_driver;
/** @brief Mode used for reading from SPI flash */
typedef enum {
ESP_FLASH_QIO, ///< Both address & data transferred using quad I/O
ESP_FLASH_QOUT, ///< Data read using quad I/O
ESP_FLASH_DIO, ///< Both address & data transferred using dual I/O
ESP_FLASH_DOUT, ///< Data read using dual I/O
ESP_FLASH_FASTRD, ///< Data read using single I/O, no limit on speed
ESP_FLASH_SLOWRD, ///< Data read using single I/O, some limits on speed
ESP_FLASH_READ_MODE_MAX,
} esp_flash_read_mode_t;
/** @brief Configured SPI flash clock speed */
typedef enum {
ESP_FLASH_80MHZ,
ESP_FLASH_40MHZ,
ESP_FLASH_26MHZ,
ESP_FLASH_20MHZ,
ESP_FLASH_SPEED_MAX,
} esp_flash_speed_t;
/** @brief Structure for describing a region of flash */
typedef struct {
uint32_t offset;
uint32_t size;
} esp_flash_region_t;
// TODO this is copied from SPI driver, should be unified somehow
typedef struct {
int mosi_io_num; ///< GPIO pin for Master Out Slave In (=spi_d) signal
int miso_io_num; ///< GPIO pin for Master In Slave Out (=spi_q) signal
int sclk_io_num; ///< GPIO pin for Spi CLocK signal
int quadwp_io_num; ///< GPIO pin for WP (Write Protect) signal which is used as D2 in 4-bit communication modes, or -1 if not used.
int quadhd_io_num; ///< GPIO pin for HD (HolD) signal which is used as D3 in 4-bit communication modes, or -1 if not used.
} esp_flash_pin_cfg_t;
/** @brief Structure to describe a SPI flash chip connected to the system.
Structure must be passed to esp_flash_init() before use.
*/
typedef struct {
spi_dev_t *spi; ///< Pointer to hardware SPI bus registers used for connection (SP1, SPI2 or SPI3). Set before initialisation.
esp_flash_speed_t speed; ///< Configured SPI flash clock speed. Set before initialisation.
esp_flash_read_mode_t read_mode; ///< Configured SPI flash read mode. Set before initialisation.
uint32_t size; ///< Size of SPI flash in bytes. If 0, size will be detected during initialisation.
const struct esp_flash_driver *drv; ///< Pointer to chip-model-specific "driver" structure. If NULL, will be detected during initialisatiopn.
const esp_flash_pin_cfg_t *pins; ///< Pin configuration for the chip
void *driver_data; ///< Currently unused, allows drivers to store driver-implementation-specific data on initialisation
} esp_flash_chip_t;
/** @brief Possible errors returned from SPI flash low-level API */
typedef enum {
FLASH_OK = 0, ///< Success
FLASH_ERR_NOT_INITIALISED, ///< esp_flash_chip_t structure not correctly initialised by esp_flash_init().
FLASH_ERR_INVALID_ARG, ///< A supplied argument was invalid.
FLASH_ERR_NOT_FOUND, ///< A requested value is not found.
FLASH_ERR_NO_RESPONSE, ///< Chip did not respond to the command, or timed out.
FLASH_ERR_UNSUPPORTED_HOST, ///< Requested operation isn't supported via this host SPI bus (chip->spi field).
FLASH_ERR_UNSUPPORTED_CHIP, ///< Requested operation isn't supported by this model of SPI flash chip.
FLASH_ERR_PROTECTED, ///< Write operation failed due to chip's write protection being enabled.
} esp_flash_err_t;
/** @brief Initialise SPI flash chip interface.
*
* This function must be called before any other API functions are called for this chip.
*
* @note Only the spi, speed & read_mode fields of the chip structure need to be initialised. Other fields will be auto-detected
* if left set to zero or NULL.
*
* @note If the chip->drv pointer is NULL, chip driver will be autodetected based on its manufacturer & product IDs. See
* esp_flash_registered_flash_drivers pointer for details of this process.
*
* @param chip Pointer to SPI flash chip to use. If NULL, esp_flash_default_chip is substituted.
* @return FLASH_OK on success, or a flash error code if initialisation fails.
*/
esp_flash_err_t esp_flash_init(esp_flash_chip_t *chip);
/** @brief Read flash ID via the common "RDID" SPI flash command.
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param[out] Pointer to receive ID value.
*
* ID is a 24-bit value. Lower 16 bits of 'id' are the chip ID, upper 8 bits are the manufacturer ID.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_read_id(const esp_flash_chip_t *chip, uint32_t *id);
/** @brief Detect flash size based on flash ID.
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param[out] Detected size in bytes.
*
* @note Most flash chips use a common format for flash ID, where the lower 4 bits specify the size as a power of 2. If
* the manufacturer doesn't follow this convention, the size may be incorrectly detected.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_detect_size(const esp_flash_chip_t *chip, uint32_t *size);
/** @brief Erase flash chip contents
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
*
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_erase_chip(const esp_flash_chip_t *chip);
/** @brief Erase a region of the flash chip
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param start Address to start erasing flash. Must be sector aligned.
* @param len Length of region to erase. Must also be sector aligned.
*
* Sector size is specifyed in chip->drv->sector_size field (typically 4096 bytes.) FLASH_ERR_INVALID_ARG will be
* returned if the start & length are not a multiple of this size.
*
* Erase is performed using block (multi-sector) erases where possible (block size is specified in
* chip->drv->block_erase_size field, typically 65536 bytes). Remaining sectors are erased using individual sector erase
* commands.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_erase_region(const esp_flash_chip_t *chip, uint32_t start, uint32_t len);
/** @brief Read if the entire chip is write protected
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param[out] write_protected Pointer to boolean, set to the value of the write protect flag.
*
* @note A correct result for this flag depends on the SPI flash chip model and driver in use (via the 'chip->drv'
* field).
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_get_chip_write_protect(const esp_flash_chip_t *chip, bool *write_protected);
/** @brief Set write protection for the SPI flash chip
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param write_protected Boolean value for the write protect flag
*
* @note Correct behaviour of this function depends on the SPI flash chip model and driver in use (via the 'chip->drv'
* field).
*
* If write protection is enabled, destructive operations will fail with FLASH_ERR_PROTECTED.
*
* Some SPI flash chips may require a power cycle before write protect status can be cleared. Otherwise,
* write protection can be removed via a follow-up call to this function.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_set_chip_write_protect(const esp_flash_chip_t *chip, bool write_protect_chip);
/** @brief Read the list of individually protectable regions of this SPI flash chip.
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param regions[out] Pointer to receive a pointer to the array of protectable regions of the chip.
* @param[out] Pointer to an integer receiving the count of protectable regions in the array returned in 'regions'.
*
* @note Correct behaviour of this function depends on the SPI flash chip model and driver in use (via the 'chip->drv'
* field).
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_get_protectable_regions(const esp_flash_chip_t *chip, const esp_flash_region_t **regions, uint32_t *num_regions);
/** @brief Detect if a region of the SPI flash chip is protected
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param region Pointer to a struct describing a protected region. This must match one of the regions returned from esp_flash_get_protectable_regions(...).
* @param[out] protected Pointer to a flag which is set based on the protected status for this region.
*
* @note It is possible for this result to be false and write operations to still fail, if protection is enabled for the entire chip.
*
* @note Correct behaviour of this function depends on the SPI flash chip model and driver in use (via the 'chip->drv'
* field).
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_get_protected_region(const esp_flash_chip_t *chip, const esp_flash_region_t *region, bool *protected);
/** @brief Update the protected status for a region of the SPI flash chip
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param region Pointer to a struct describing a protected region. This must match one of the regions returned from esp_flash_get_protectable_regions(...).
* @param protected Write protection flag to set.
*
* @note It is possible for the region protection flag to be cleared and write operations to still fail, if protection is enabled for the entire chip.
*
* @note Correct behaviour of this function depends on the SPI flash chip model and driver in use (via the 'chip->drv'
* field).
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_set_protected_region(const esp_flash_chip_t *chip, const esp_flash_region_t *region, bool protected);
/** @brief Read data from the SPI flash chip
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param buffer Pointer to a buffer where the data will be read.
* @param address Address on flash to read from. Must be less than chip->size field.
* @param length Length (in bytes) of data to read.
*
* There are no alignment constraints on buffer, address or length.
*
* @note If on-chip flash encryption is used, this function returns raw (ie encrypted) data. Use the flash cache
* to transparently decrypt data.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_read(const esp_flash_chip_t *chip, void *buffer, uint32_t address, uint32_t length);
/** @brief Write data to the SPI flash chip
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param address Address on flash to write to. Must be previously erased (SPI NOR flash can only write bits 1->0).
* @param buffer Pointer to a buffer with the data to write.
* @param length Length (in bytes) of data to write.
*
* There are no alignment constraints on buffer, address or length.
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_write(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/** @brief Encrypted and write data to the SPI flash chip using on-chip hardware flash encryption
*
* @param chip Pointer to identify flash chip. Must have been successfully initialised via esp_flash_init()
* @param address Address on flash to write to. 16 byte aligned. Must be previously erased (SPI NOR flash can only write bits 1->0).
* @param buffer Pointer to a buffer with the data to write.
* @param length Length (in bytes) of data to write. 16 byte aligned.
*
* @note Both address & length must be 16 byte aligned, as this is the encryption block size
*
* @return FLASH_OK on success, or a flash error code if operation failed.
*/
esp_flash_err_t esp_flash_write_encrypted(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/** @brief Pointer to the "default" SPI flash chip, ie the main chip attached to the MCU.
This chip is used if the 'chip' argument pass to esp_flash_xxx API functions is ever NULL.
*/
extern const esp_flash_chip_t *esp_flash_default_chip;
/** @brief Initialise the default SPI flash chip
*
* Called by OS startup code. You do not need to call this in your own applications.
*/
esp_flash_err_t esp_flash_init_default_chip();
/** Enable OS-level SPI flash protections in IDF */
void esp_flash_low_level_app_init(); /* ROM TODO move this to IDF */

176
components/spi_flash/include/spi_flash_lowlevel_driver.h Normal file
View File

@ -0,0 +1,176 @@
#pragma once
#include "spi_flash_lowlevel.h"
/** @brief SPI flash driver definition structure.
*
* The driver structure contains chip-specific pointers to functions to perform SPI flash operations, and some
* chip-specific numeric values.
*
* @note This is not a public API. Driver-specific functions are called from the public API (declared in
* spi_flash_lowlevel.h). They assume the caller has already validated arguments and enabled relevant protections
* (disabling flash cache, prevent concurrent SPI access, etc.)
*
* Do not call driver functions directly in other contexts.
*
* A generic driver and it's related operations are defined in spi_flash_lowlevel_generic.h which can be used as
* building blocks for written new/specific SPI flash chip drivers.
*
* @note All of these functions may be called with SPI flash cache disabled, so must only ever access IRAM/DRAM/ROM.
*/
typedef struct esp_flash_driver {
/* Probe to detect if a supported SPI flash chip is found.
*
* Attempts to configure 'chip' with these operations and probes for a matching SPI flash chip.
*
* Auto-detection of a SPI flash chip calls this function in turn on each registered driver (see esp_flash_registered_flash_drivers).
*
* ID - as read by spi_flash_generic_read_id() - is supplied so each probe
* function doesn't need to unnecessarily read ID, but probe is permitted
* to interrogate flash in any non-destructive way.
*
* It is permissible for the driver to modify the 'chip' structure if probing succeeds (specifically, to assign something to the
* driver_data pointer if that is useful for the driver.)
*
* @return FLASH_OK if probing was successful, an error otherwise. Driver may
* assume that returning FLASH_OK means it has claimed this chip.
*/
esp_flash_err_t (*probe)(esp_flash_chip_t *chip, uint32_t flash_id);
/* Read SPI flash ID
*
* Sends RDID (or an equivalent command) to the device.
*/
esp_flash_err_t (*read_id)(const esp_flash_chip_t *chip, uint32_t *id);
/* Detect SPI flash size
*
* Interrogate the chip to detect it's size.
*/
esp_flash_err_t (*detect_size)(const esp_flash_chip_t *chip, uint32_t *size);
/* Erase the entire chip
Caller has verified the chip is not write protected.
*/
esp_flash_err_t (*erase_chip)(const esp_flash_chip_t *chip);
/* Erase a sector of the chip. Sector size is specified in the 'sector_size' field.
sector_address is an offset in bytes.
Caller has verified that this sector should be non-write-protected.
*/
esp_flash_err_t (*erase_sector)(const esp_flash_chip_t *chip, uint32_t sector_address);
/* Erase a multi-sector block of the chip. Block size is specified in the 'block_erase_size' field.
sector_address is an offset in bytes.
Caller has verified that this block should be non-write-protected.
*/
esp_flash_err_t (*erase_block)(const esp_flash_chip_t *chip, uint32_t block_address);
uint32_t sector_size; /* Sector is minimum erase size */
uint32_t block_erase_size; /* Optimal (fastest) block size for multi-sector erases on this chip */
/* Read the write protect status of the entire chip. */
esp_flash_err_t (*get_chip_write_protect)(const esp_flash_chip_t *chip, bool *write_protected);
/* Set the write protect status of the entire chip. */
esp_flash_err_t (*set_chip_write_protect)(const esp_flash_chip_t *chip, bool write_protect_chip);
/* Number of individually write protectable regions on this chip. Range 0-63. */
uint8_t num_protectable_regions;
/* Pointer to an array describing each protectable region. Should have num_protectable_regions elements. */
const esp_flash_region_t *protectable_regions;
/* Get a bitmask describing all protectable regions on the chip. Each bit represents one entry in the
protectable_regions array, ie bit (1<<N) is set then the region at array entry N is write protected. */
esp_flash_err_t (*get_protected_regions)(const esp_flash_chip_t *chip, uint64_t *regions);
/* Set protectable regions on the chip. Each bit represents on entry in the protectable regions array. */
esp_flash_err_t (*set_protected_regions)(const esp_flash_chip_t *chip, uint64_t regions);
/* Read data from the chip.
*
* Before calling this function, the caller will have called chip->drv->set_read_mode(chip) in order to configure the chip's read mode correctly.
*/
esp_flash_err_t (*read)(const esp_flash_chip_t *chip, void *buffer, uint32_t address, uint32_t length);
/* Write any amount of data to the chip.
*/
esp_flash_err_t (*write)(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/* Use the page program command to write data to the chip.
*
* This function is expected to be called by chip->drv->write (if the
* chip->drv->write implementation doesn't call it then it can be left as NULL.)
*
* - The length argument supplied to this function is at most 'page_size' bytes.
*
* - The region between 'address' and 'address + length' will not cross a page_size aligned boundary (the write
* implementation is expected to split such a write into two before calling page_program.)
*/
esp_flash_err_t (*page_program)(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/* Page size as written by the page_program function. Usually 256 bytes. */
uint32_t page_size;
/* Perform an encrypted write to the chip, using internal flash encryption hardware. */
esp_flash_err_t (*write_encrypted)(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/* Set the write enable flag. This function is called internally by other functions in this structure, before a destructive
operation takes place. */
esp_flash_err_t (*write_enable)(const esp_flash_chip_t *chip);
/* Wait for the SPI flash chip to be idle (any write operation to be complete.) This function is both called from the higher-level API functions, and from other functions in this structure.
timeout_ms should be a timeout (in milliseconds) before the function returns FLASH_ERR_NO_RESPONSE. This is useful to avoid hanging
if the chip is otherwise unresponsive (ie returns all 0xFF or similar.)
*/
esp_flash_err_t (*wait_idle)(const esp_flash_chip_t *chip, unsigned timeout_ms);
/* Configure both the SPI host and the chip for the read mode specified in chip->read_mode.
*
* This function is called by the higher-level API before the 'read' function is called.
*
* Can return FLASH_ERR_UNSUPPORTED_HOST or FLASH_ERR_UNSUPPORTED_CHIP if the specified mode is unsupported.
*/
esp_flash_err_t (*set_read_mode)(const esp_flash_chip_t *chip);
} esp_flash_driver_t;
/* Pointer to an array of pointers to all known drivers for flash chips. This array is used
by esp_flash_init() to detect the flash chip driver, if none is supplied by the caller.
Array is terminated with a NULL pointer.
This pointer can be overwritten with a pointer to a new array, to update the list of known flash chips.
*/
extern const esp_flash_driver_t **esp_flash_registered_flash_drivers;
/* Provide OS-level integration hooks for accessing flash chips
inside a running OS */
typedef struct
{
/* Call this function before commencing any flash operation.
Does not need to be recursive (ie is called at most once for each call to 'end'.
*/
esp_flash_err_t (*start)(const esp_flash_chip_t *chip);
/* Call this function after completing any flash operation. */
esp_flash_err_t (*end)(const esp_flash_chip_t *chip);
/* Delay for at least 'ms' milliseconds.
This function will be called in between 'start' and 'end'.
*/
esp_flash_err_t (*delay_ms)(unsigned ms);
} esp_flash_os_functions_t;
/* The default (ie initial boot) no-OS ROM esp_flash_os_functions_t */
const esp_flash_os_functions_t esp_flash_noos_functions;
/* Pointer to the current esp_flash_os_functions_t structure in use.
Can be changed at runtime to reflect different running conditions.
*/
extern const esp_flash_os_functions_t *esp_flash_os_functions;

151
components/spi_flash/include/spi_flash_lowlevel_generic.h Normal file
View File

@ -0,0 +1,151 @@
#pragma once
#include "spi_flash_lowlevel_driver.h"
/* The 'generic' SPI flash operations are a lowest common subset of SPI flash commands, that work across most chips.
*
* These can be used as-is vai the esp_flash_common_chip_driver driver, or they can be used as "base driver" functions when
* creating a new esp_flash_driver_t driver structure.
*
*
* All of the functions in this header are internal functions, not part of a public API. See spi_flash_lowlevel.h for
* the public API.
*/
/* SPI commands (actual on-wire commands not SPI controller bitmasks)
Suitable for use with spi_flash_common_command static function.
*/
#define CMD_RDID 0x9F
#define CMD_WRSR 0x01
#define CMD_WRSR2 0x31 /* Not all SPI flash uses this command */
#define CMD_WREN 0x06
#define CMD_WRDI 0x04
#define CMD_RDSR 0x05
#define CMD_RDSR2 0x35 /* Not all SPI flash uses this command */
#define CMD_FASTRD_QIO 0xEB
#define CMD_FASTRD_QUAD 0x6B
#define CMD_FASTRD_DIO 0xBB
#define CMD_FASTRD_DUAL 0x3B
#define CMD_FASTRD 0x0B
#define CMD_READ 0x03 /* Speed limited */
#define CMD_CHIP_ERASE 0xC7
#define CMD_SECTOR_ERASE 0x20
#define CMD_LARGE_BLOCK_ERASE 0xD8 /* 64KB block erase command */
#define SR_WIP (1<<0) /* Status register write-in-progress bit */
#define SR_WREN (1<<1) /* Status register write enable bit */
/** @brief Execute a simple SPI flash command against the chip.
*
* @param chip Pointer to the chip to use.
* @param command Command to execute (an on-wire hex command.)
* @param mosi_data Up to 32 bits of MOSI data to write after the command.
* @param mosi_len Length of MOSI data (in bits.)
* @param miso_len Length of MISO data (in bits.)
* @return MISO value read back, if any (depending on miso_len value.)
*/
uint32_t spi_flash_common_command(const esp_flash_chip_t *chip, uint8_t command, uint32_t mosi_data, uint8_t mosi_len, uint8_t miso_len);
/** @brief Returns true if the pin configuration for this chip uses the GPIO matrix for any signals. */
bool spi_flash_uses_gpio_matrix(const esp_flash_chip_t *chip);
/** @brief Generic probe function
*
* If chip->drv_read_id succeeds, the probe succeeds.
*/
esp_flash_err_t spi_flash_generic_probe(esp_flash_chip_t *chip, uint32_t flash_id);
/** @brief Generic implementation of esp_flash_driver_t->read_id
*
* Uses the RDID command (9Fh) supported by most SPI flash chips.
*
* Results of all-zeroes or all-ones are considered failures (probably no chip attached.)
*/
esp_flash_err_t spi_flash_generic_read_id(const esp_flash_chip_t *chip, uint32_t *id);
/** @brief Generic size detection function
*
* Tries to detect the size of chip by using the lower 4 bits of the chip->drv->read_id result = N, and assuming size is 2 ^ N.
*/
esp_flash_err_t spi_flash_generic_detect_size(const esp_flash_chip_t *chip, uint32_t *size);
/** @brief Erase chip by using the generic erase chip (C7h) command. */
esp_flash_err_t spi_flash_generic_erase_chip(const esp_flash_chip_t *chip);
/** @brief Erase sector by using the generic sector erase (20h) command. */
esp_flash_err_t spi_flash_generic_erase_sector(const esp_flash_chip_t *chip, uint32_t start_address);
/** @brief Erase block by using the generic 64KB block erase (D8h) command */
esp_flash_err_t spi_flash_generic_erase_block(const esp_flash_chip_t *chip, uint32_t start_address);
/** @brief Read from flash by using a read command that matches the programmed read mode. */
esp_flash_err_t spi_flash_generic_read(const esp_flash_chip_t *chip, void *buffer, uint32_t address, uint32_t length);
/** @brief Perform a page program using the page program (02h) command. */
esp_flash_err_t spi_flash_generic_page_program(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/** @brief Perform a generic write. Split the write buffer into
one page operations, and call chip->drv->page-program() for each.
*/
esp_flash_err_t spi_flash_generic_write(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/** @brief Perform a write using on-chip flash encryption */
esp_flash_err_t spi_flash_generic_write_encrypted(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length);
/** @brief Send the write enable (06h) command and verify the expected bit (1) in the status register is set. */
esp_flash_err_t spi_flash_generic_write_enable(const esp_flash_chip_t *chip);
/** @brief Wait for the SPI host hardware state machine to be idle.
This isn't a flash driver operation, but it's called by spi_flash_generic_wait_idle() and may be useful when implementing alternative drivers.
timeout_ms will be decremented if the function needs to wait until the host hardware is idle.
*/
esp_flash_err_t spi_flash_generic_wait_host_idle(const esp_flash_chip_t *chip, uint32_t *timeout_ms);
/** @brief Read flash status via the RDSR command (05h) and wait for bit 0 (write in progress bit) to be cleared. */
esp_flash_err_t spi_flash_generic_wait_idle(const esp_flash_chip_t *chip, uint32_t timeout_ms);
/** @brief Utility function to configure the SPI host hardware registers for the specified read mode.
Called by spi_flash_generic_set_read_mode() but may also be useful
when implementing other SPI flash drivers.
Note that calling this configures SPI host registers, so if running any other commands as part of set_read_mode() then these must be run before calling this function.
*/
esp_flash_err_t spi_flash_common_configure_host_read_mode(const esp_flash_chip_t *chip);
/** @brief Utility function for set_read_mode driver function
*
* Most setting of read mode follows a common pattern, except for how to enable Quad I/O modes (QIO/QOUT).
* These use different commands to read/write the status register, and a different bit is set/cleared.
*
* This is a generic utility function to implement set_read_mode() for this pattern. Also configures host
* registers via spi_flash_common_configure_host_read_mode().
*
* @param qe_rdsr_command SPI flash command to read status register
* @param qe_wrsr_command SPI flash command to write status register
* @param qe_sr_bitwidth Width of the status register these commands operate on, in bits.
* @param qe_sr_bit Bit mask for enabling Quad Enable functions on this chio.
*/
esp_flash_err_t spi_flash_common_set_read_mode(const esp_flash_chip_t *chip, uint8_t qe_rdsr_command, uint8_t qe_wrsr_command, uint8_t qe_sr_bitwidth, unsigned qe_sr_bit);
/** @brief Set the specified SPI read mode.
*
* Includes setting SPI host hardware registers, but also setting quad enable status register bit if needed.
*/
esp_flash_err_t spi_flash_generic_set_read_mode(const esp_flash_chip_t *chip);
/** @brief Returns true if chip is configured for Quad I/O or
Quad Fast Read */
inline static bool spi_flash_is_quad_mode(const esp_flash_chip_t *chip)
{
return chip->read_mode == ESP_FLASH_QIO || chip->read_mode == ESP_FLASH_QOUT;
}
/* Generic SPI flash driver, uses all the above functions for its operations. In default autodetection, this is used as
a catchall if a more specific driver is not found.
*/
extern const esp_flash_driver_t esp_flash_generic_chip_driver;

7
components/spi_flash/linker.lf
View File

@ -1,5 +1,10 @@
[mapping:spi_flash]
archive: libspi_flash.a
entries:
entries:
spi_flash_rom_patch (noflash_text)
spi_flash_lowlevel_api (noflash)
spi_flash_lowlevel_generic (noflash)
spi_flash_lowlevel_issi (noflash)
spi_flash_lowlevel_idf_app (noflash)
spi_flash_driver_hs (noflash)

552
components/spi_flash/spi_flash_lowlevel_api.c Normal file
View File

@ -0,0 +1,552 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include <stdio.h>
#include <sys/param.h>
#include <string.h>
#include "spi_flash_lowlevel_driver.h"
#include "spi_flash_lowlevel_generic.h"
#include "soc/spi_reg.h"
#define MAX_WRITE_CHUNK 8192 /* write in chunks */
/* Static function to notify OS of a new SPI flash operation.
If returns an error result, caller must abort. If returns FLASH_OK, caller must
call spiflash_end() before returning.
*/
static esp_flash_err_t spiflash_start(const esp_flash_chip_t *chip)
{
if (esp_flash_os_functions != NULL
&& esp_flash_os_functions->start != NULL) {
esp_flash_err_t err = esp_flash_os_functions->start(chip);
if (err != FLASH_OK) {
return err;
}
}
return FLASH_OK;
}
/* Static function to notify OS that SPI flash operation is complete.
*/
static esp_flash_err_t spiflash_end(const esp_flash_chip_t *chip, esp_flash_err_t err)
{
if (esp_flash_os_functions != NULL
&& esp_flash_os_functions->end != NULL) {
esp_flash_err_t end_err = esp_flash_os_functions->end(chip);
if (err == FLASH_OK) {
err = end_err; // Only return the 'end' error if we haven't already failed
}
}
return err;
}
/* Return true if regions 'a' and 'b' overlap at all, based on their start offsets and lengths. */
inline static bool regions_overlap(uint32_t a_start, uint32_t a_len,uint32_t b_start, uint32_t b_len);
/* Top-level API functions, calling into driver functions via chip->drv */
static esp_flash_err_t detect_spi_flash_chip(esp_flash_chip_t *chip);
esp_flash_err_t esp_flash_init(esp_flash_chip_t *chip)
{
if (chip->spi == NULL) {
return FLASH_ERR_INVALID_ARG;
}
// TODO: configure SPI host clock speed, pin configuration
if (chip->drv == NULL) {
// Detect driver
esp_flash_err_t err = detect_spi_flash_chip(chip);
if (err != FLASH_OK) {
return err;
}
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
if (chip->size == 0) {
// Detect flash size
err = chip->drv->detect_size(chip, &chip->size);
}
if (err == FLASH_OK) {
// Try to set the flash mode to whatever default mode was chosen
// (this isn't necessary at this point for functionality, but init will fail
// if this mode can't be set on this chip.)
err = chip->drv->set_read_mode(chip);
}
// Done: all fields on 'chip' are initialised
return spiflash_end(chip, err);
}
static esp_flash_err_t detect_spi_flash_chip(esp_flash_chip_t *chip)
{
esp_flash_err_t err;
uint32_t flash_id;
int retries = 10;
do {
err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
// Send generic RDID command twice, check for a matching result and retry in case we just powered on (inner
// function fails if it sees all-ones or all-zeroes.)
err = spi_flash_generic_read_id(chip, &flash_id);
if (err == FLASH_OK) { // check we see the same ID twice, in case of transient power-on errors
uint32_t new_id;
err = spi_flash_generic_read_id(chip, &new_id);
if (err == FLASH_OK && (new_id != flash_id)) {
err = FLASH_ERR_NOT_INITIALISED;
}
}
err = spiflash_end(chip, err);
} while (err != FLASH_OK && retries-- > 0);
// Detect the chip and set the driver structure for it
const esp_flash_driver_t **drivers = esp_flash_registered_flash_drivers;
while (*drivers != NULL && chip->drv == NULL) {
chip->drv = *drivers;
// start/end SPI operation each time, for multitasking
// and also so esp_flash_registered_flash_drivers can live in flash
err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
if (chip->drv->probe(chip, flash_id) != FLASH_OK) {
chip->drv = NULL;
}
// if probe succeeded, chip->drv stays set
drivers++;
err = spiflash_end(chip, err);
if (err != FLASH_OK) {
return err;
}
}
return (chip->drv == NULL) ? FLASH_ERR_NOT_FOUND : FLASH_OK;
}
// Convenience macro for beginning of all API functions,
// check that the 'chip' parameter is properly initialised
// and supports the operation in question
#define VERIFY_OP(OP) do { \
if (chip == NULL) { \
chip = esp_flash_default_chip; \
} \
if (chip == NULL || chip->drv == NULL) { \
return FLASH_ERR_NOT_INITIALISED; \
} \
if (chip->drv->OP == NULL) { \
return FLASH_ERR_UNSUPPORTED_CHIP; \
} \
} while (0)
esp_flash_err_t esp_flash_read_id(const esp_flash_chip_t *chip, uint32_t *id)
{
printf("chip %p esp_flash_default_chip %p\n",
chip, esp_flash_default_chip);
VERIFY_OP(read_id);
if (id == NULL) {
return FLASH_ERR_INVALID_ARG;
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->read_id(chip, id);
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_detect_size(const esp_flash_chip_t *chip, uint32_t *size)
{
VERIFY_OP(detect_size);
if (size == NULL) {
return FLASH_ERR_INVALID_ARG;
}
*size = 0;
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->detect_size(chip, size);
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_erase_chip(const esp_flash_chip_t *chip)
{
VERIFY_OP(erase_chip);
bool write_protect = false;
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = esp_flash_get_chip_write_protect(chip, &write_protect);
if (err == FLASH_OK && write_protect) {
err = FLASH_ERR_PROTECTED;
}
if (err == FLASH_OK) {
err = chip->drv->erase_chip(chip);
}
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_erase_region(const esp_flash_chip_t *chip, uint32_t start, uint32_t len)
{
VERIFY_OP(erase_sector);
uint32_t block_erase_size = chip->drv->erase_block == NULL ? 0 : chip->drv->block_erase_size;
uint32_t sector_size = chip->drv->sector_size;
bool write_protect = false;
if (sector_size == 0 || (block_erase_size % sector_size) != 0) {
return FLASH_ERR_NOT_INITIALISED;
}
if (start > chip->size || start + len > chip->size) {
return FLASH_ERR_INVALID_ARG;
}
if ((start % chip->drv->sector_size) != 0 || (len % chip->drv->sector_size) != 0) {
// Can only erase multiples of the sector size, starting at sector boundary
return FLASH_ERR_INVALID_ARG;
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
// Check for write protection on whole chip
if (chip->drv->get_chip_write_protect != NULL) {
err = chip->drv->get_chip_write_protect(chip, &write_protect);
if (err == FLASH_OK && write_protect) {
err = FLASH_ERR_PROTECTED;
}
}
// Check for write protected regions overlapping the erase region
if (err == FLASH_OK && chip->drv->get_protected_regions != NULL && chip->drv->num_protectable_regions > 0) {
uint64_t protected = 0;
err = chip->drv->get_protected_regions(chip, &protected);
if (protected != 0) {
for (int i = 0; i < chip->drv->num_protectable_regions && err == FLASH_OK; i++) {
const esp_flash_region_t *region = &chip->drv->protectable_regions[i];
if ((protected & (1LL << i))
&& regions_overlap(start, len, region->offset, region->size)) {
err = FLASH_ERR_PROTECTED;
}
}
}
}
// Don't lock the SPI flash for the entire erase, as this may be very long
err = spiflash_end(chip, err);
while (err == FLASH_OK && len >= sector_size) {
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
// If possible erase an entire multi-sector block
if (block_erase_size > 0 && len >= block_erase_size && (start % block_erase_size) == 0) {
err = chip->drv->erase_block(chip, start);
start += block_erase_size;
len -= block_erase_size;
}
else {
// Otherwise erase individual sector only
err = chip->drv->erase_sector(chip, start);
start += sector_size;
len -= sector_size;
}
err = spiflash_end(chip, err);
}
return err;
}
esp_flash_err_t esp_flash_get_chip_write_protect(const esp_flash_chip_t *chip, bool *write_protected)
{
VERIFY_OP(get_chip_write_protect);
if (write_protected == NULL) {
return FLASH_ERR_INVALID_ARG;
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->get_chip_write_protect(chip, write_protected);
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_set_chip_write_protect(const esp_flash_chip_t *chip, bool write_protect_chip)
{
VERIFY_OP(set_chip_write_protect);
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->set_chip_write_protect(chip, write_protect_chip);
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_get_protectable_regions(const esp_flash_chip_t *chip, const esp_flash_region_t **regions, uint32_t *num_regions)
{
if(num_regions != NULL) {
*num_regions = 0; // In case caller doesn't check result
}
VERIFY_OP(get_protected_regions);
if(regions == NULL || num_regions == NULL) {
return FLASH_ERR_INVALID_ARG;
}
*num_regions = chip->drv->num_protectable_regions;
*regions = chip->drv->protectable_regions;
return FLASH_OK;
}
static esp_flash_err_t find_region(const esp_flash_chip_t *chip, const esp_flash_region_t *region, uint8_t *index)
{
if (region == NULL) {
return FLASH_ERR_INVALID_ARG;
}
for(*index = 0; *index < chip->drv->num_protectable_regions; (*index)++) {
if (memcmp(&chip->drv->protectable_regions[*index],
region, sizeof(esp_flash_region_t)) == 0) {
return FLASH_OK;
}
}
return FLASH_ERR_NOT_FOUND;
}
esp_flash_err_t esp_flash_get_protected_region(const esp_flash_chip_t *chip, const esp_flash_region_t *region, bool *protected)
{
VERIFY_OP(get_protected_regions);
if (protected == NULL) {
return FLASH_ERR_INVALID_ARG;
}
uint8_t index;
esp_flash_err_t err = find_region(chip, region, &index);
if (err != FLASH_OK) {
return err;
}
uint64_t protection_mask = 0;
err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->get_protected_regions(chip, &protection_mask);
if (err == FLASH_OK) {
*protected = protection_mask & (1LL << index);
}
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_set_protected_region(const esp_flash_chip_t *chip, const esp_flash_region_t *region, bool protected)
{
VERIFY_OP(set_protected_regions);
uint8_t index;
esp_flash_err_t err = find_region(chip, region, &index);
if (err != FLASH_OK) {
return err;
}
uint64_t protection_mask = 0;
err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->get_protected_regions(chip, &protection_mask);
if (err == FLASH_OK) {
if (protected) {
protection_mask |= (1LL << index);
} else {
protection_mask &= ~(1LL << index);
}
err = chip->drv->set_protected_regions(chip, protection_mask);
}
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_read(const esp_flash_chip_t *chip, void *buffer, uint32_t address, uint32_t length)
{
VERIFY_OP(read);
if (buffer == NULL || address > chip->size || address+length > chip->size) {
return FLASH_ERR_INVALID_ARG;
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
if (err == FLASH_OK) {
err = chip->drv->set_read_mode(chip);
}
if (err == FLASH_OK) {
err = chip->drv->read(chip, buffer, address, length);
}
return spiflash_end(chip, err);
}
esp_flash_err_t esp_flash_write(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length)
{
VERIFY_OP(write);
if (buffer == NULL || address > chip->size || address+length > chip->size) {
return FLASH_ERR_INVALID_ARG;
}
/* If 'chip' is connected to the main SPI bus, we can only write directly from regions that are accessible
with cache disabled. */
#ifdef ESP_PLATFORM
bool direct_write = ( chip->spi != &SPI1
|| ( (uintptr_t) address >= 0x3FFAE000
&& (uintptr_t) address < 0x40000000 ) );
#else
bool direct_write = true;
#endif
esp_flash_err_t err = FLASH_OK;
/* Write output in chunks, either by buffering on stack or
by artificially cutting into MAX_WRITE_CHUNK parts (in an OS
environment, this prevents writing from causing interrupt or higher priority task
starvation.) */
while(err == FLASH_OK && length > 0) {
uint32_t write_len;
const void *write_buf;
if (direct_write) {
write_len = MIN(length, MAX_WRITE_CHUNK);
write_buf = buffer;
} else {
uint32_t buf[8];
write_len = MIN(length, sizeof(buf));
memcpy(buf, buffer, write_len);
write_buf = buf;
}
err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->write(chip, address, write_buf, write_len);
address += write_len;
buffer = (void *)((intptr_t)buffer + write_len);
length -= write_len;
err = spiflash_end(chip, err);
}
return err;
}
esp_flash_err_t esp_flash_write_encrypted(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length)
{
VERIFY_OP(write_encrypted);
if (chip->spi != 0) {
// Encrypted operations have to use SPI0
return FLASH_ERR_UNSUPPORTED_HOST;
}
if (buffer == NULL || address > chip->size || address+length > chip->size) {
return FLASH_ERR_INVALID_ARG;
}
esp_flash_err_t err = spiflash_start(chip);
if (err != FLASH_OK) {
return err;
}
err = chip->drv->write_encrypted(chip, address, buffer, length);
return spiflash_end(chip, err);
}
inline static bool regions_overlap(uint32_t a_start, uint32_t a_len,uint32_t b_start, uint32_t b_len)
{
uint32_t a_end = a_start + a_len;
uint32_t b_end = b_start + b_len;
return ((a_start >= b_start && a_start <= b_end)
|| (a_end >= b_start && a_end <= b_end)
|| (b_start >= a_start && b_start <= a_end)
|| (b_end >= a_start && b_end <= a_end));
}
const esp_flash_chip_t *esp_flash_default_chip;
static esp_flash_chip_t default_chip;
esp_flash_err_t esp_flash_init_default_chip()
{
default_chip.spi = &SPI1;
default_chip.read_mode = ESP_FLASH_FASTRD; // TODO: initialise properly
default_chip.speed = ESP_FLASH_20MHZ; // TODO: initialise properly
// ROM TODO: account for non-standard default pins in efuse
// ROM TODO: to account for chips which are slow to power on, maybe keep probing in a loop here
esp_flash_err_t err = esp_flash_init(&default_chip);
if (err != FLASH_OK) {
return err;
}
esp_flash_default_chip = &default_chip;
return FLASH_OK;
}
const esp_flash_os_functions_t *esp_flash_os_functions = &esp_flash_noos_functions;

34
components/spi_flash/spi_flash_lowlevel_driver.c Normal file
View File

@ -0,0 +1,34 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include "spi_flash_lowlevel_driver.h"
extern const esp_flash_driver_t esp_flash_generic_chip_driver;
extern const esp_flash_driver_t esp_flash_issi_chip_driver;
/* Default registered chip drivers.
Note these are tested in order and first match is taken, so generic/catchall entries
should go last.
Note that the esp_flash_registered_flash_ops pointer can be
changed to point to a different array of registered ops, if desired.
*/
static const esp_flash_driver_t *default_registered_flash_drivers[] = {
&esp_flash_issi_chip_driver,
&esp_flash_generic_chip_driver,
NULL,
};
const esp_flash_driver_t **esp_flash_registered_flash_drivers = default_registered_flash_drivers;

498
components/spi_flash/spi_flash_lowlevel_generic.c Normal file
View File

@ -0,0 +1,498 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include <sys/param.h> // For MIN/MAX
#include <xtensa/hal.h>
#include "spi_flash_lowlevel_driver.h"
#include "spi_flash_lowlevel_generic.h"
#define SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT 4000
#define SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT 500
#define SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT 1000
#define DEFAULT_IDLE_TIMEOUT 200
#define DEFAULT_PAGE_PROGRAM_TIMEOUT 500
/* Hardware host-specific constants */
#define MAX_WRITE_BYTES 32
#define MAX_READ_BYTES 64
#define ADDRESS_MASK_24BIT 0xFFFFFF
uint32_t spi_flash_common_command(const esp_flash_chip_t *chip, uint8_t command, uint32_t mosi_data, uint8_t mosi_len, uint8_t miso_len)
{
typeof(chip->spi->user2) user2 = {
.usr_command_value = command,
.usr_command_bitlen = (8 -1),
};
chip->spi->user2 = user2;
typeof(chip->spi->user) user = {
.usr_miso = miso_len > 0,
.usr_mosi = mosi_len > 0,
.usr_dummy = 0,
.usr_command = 1,
};
chip->spi->user = user;
chip->spi->ctrl.val = 0;
chip->spi->miso_dlen.usr_miso_dbitlen = miso_len ? (miso_len - 1) : 0;
chip->spi->mosi_dlen.usr_mosi_dbitlen = mosi_len ? (mosi_len - 1) : 0;
// TODO: there's a bug(?) here where if multiple bytes are written
// with each byte MSB-first (correct), but the bytes are
// written out LSB first...
//
// May be easier to just document this in the function interface...
chip->spi->data_buf[0] = mosi_data;
if (spi_flash_uses_gpio_matrix(chip)) {
/* When flash pins are mapped via GPIO matrix, need a dummy cycle before reading via MISO */
if (chip->speed == ESP_FLASH_80MHZ) {
chip->spi->user.usr_dummy = 1;
chip->spi->user1.usr_dummy_cyclelen = 1;
} else {
chip->spi->user.usr_dummy = 1;
chip->spi->user1.usr_dummy_cyclelen = 0;
}
}
chip->spi->cmd.usr = 1;
while(chip->spi->cmd.usr != 0)
{ }
uint32_t miso = chip->spi->data_buf[0];
return miso;
}
esp_flash_err_t spi_flash_generic_probe(esp_flash_chip_t *chip, uint32_t flash_id)
{
// This is the catch-all probe function, claim the chip always if nothing
// else has claimed it yet.
return FLASH_OK;
}
esp_flash_err_t spi_flash_generic_read_id(const esp_flash_chip_t *chip, uint32_t *id)
{
uint32_t raw_flash_id = spi_flash_common_command(chip, CMD_RDID, 0, 0, 24);
if (raw_flash_id == 0xFFFFFF || raw_flash_id == 0) {
return FLASH_ERR_NO_RESPONSE;
}
// Byte swap the flash id as it's usually written the other way around
uint8_t mfg_id = raw_flash_id & 0xFF;
uint16_t flash_id = (raw_flash_id >> 16) | (raw_flash_id & 0xFF00);
*id = ((uint32_t)mfg_id << 16) | flash_id;
return FLASH_OK;
}
esp_flash_err_t spi_flash_generic_detect_size(const esp_flash_chip_t *chip, uint32_t *size)
{
uint32_t id = 0;
*size = 0;
esp_flash_err_t err = chip->drv->read_id(chip, &id);
if (err != FLASH_OK) {
return err;
}
/* Can't detect size unless the high byte of the product ID matches the same convention, which is usually 0x40 or
* 0xC0 or similar. */
if ((id & 0x0F00) != 0) {
return FLASH_ERR_UNSUPPORTED_CHIP;
}
*size = 1 << (id & 0xFF);
return FLASH_OK;
}
esp_flash_err_t spi_flash_generic_erase_chip(const esp_flash_chip_t *chip)
{
esp_flash_err_t err;
err = chip->drv->write_enable(chip);
if (err == FLASH_OK) {
err = chip->drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
}
if (err == FLASH_OK) {
chip->spi->ctrl.val = 0;
chip->spi->cmd.flash_ce = 1;
while(chip->spi->cmd.val != 0) { }
err = chip->drv->wait_idle(chip, SPI_FLASH_GENERIC_CHIP_ERASE_TIMEOUT);
}
return err;
}
esp_flash_err_t spi_flash_generic_erase_sector(const esp_flash_chip_t *chip, uint32_t start_address)
{
esp_flash_err_t err = chip->drv->write_enable(chip);
if (err == FLASH_OK) {
err = chip->drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
}
if (err == FLASH_OK) {
chip->spi->user1.usr_addr_bitlen = (24 - 1);
chip->spi->addr = start_address & ADDRESS_MASK_24BIT;
chip->spi->ctrl.val = 0;
chip->spi->cmd.flash_se = 1;
while(chip->spi->cmd.val != 0) { }
err = chip->drv->wait_idle(chip, SPI_FLASH_GENERIC_SECTOR_ERASE_TIMEOUT);
}
return err;
}
esp_flash_err_t spi_flash_generic_erase_block(const esp_flash_chip_t *chip, uint32_t start_address)
{
esp_flash_err_t err = chip->drv->write_enable(chip);
if (err == FLASH_OK) {
err = chip->drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
}
if (err == FLASH_OK) {
chip->spi->user1.usr_addr_bitlen = (24 - 1);
chip->spi->addr = start_address & ADDRESS_MASK_24BIT;
chip->spi->cmd.flash_be = 1;
while(chip->spi->cmd.val != 0) { }
err = chip->drv->wait_idle(chip, SPI_FLASH_GENERIC_BLOCK_ERASE_TIMEOUT);
}
return err;
}
esp_flash_err_t spi_flash_generic_read(const esp_flash_chip_t *chip, void *buffer, uint32_t address, uint32_t length)
{
esp_flash_err_t err = FLASH_OK;
while (err == FLASH_OK && length > 0) {
uint32_t read_len = MIN(length, MAX_READ_BYTES);
chip->spi->miso_dlen.usr_miso_dbitlen = (read_len * 8) - 1;
chip->spi->addr = address << 8;
chip->spi->cmd.usr = 1;
while(chip->spi->cmd.val != 0) {}
if(((intptr_t)buffer % 4 == 0) && (read_len % 4 == 0)) {
// If everything is word-aligned, do a faster memcpy
xthal_memcpy(buffer, (void *)chip->spi->data_buf, read_len);
length -= read_len;
buffer = (void *)((intptr_t)buffer + read_len);
address += read_len;
} else {
// Otherwise, slow(er) path copies word by word
for (int i = 0; i < (read_len+3)/4; i++) {
int word_len = MIN(sizeof(uint32_t), length);
uint32_t word = chip->spi->data_buf[i];
xthal_memcpy(buffer, &word, word_len);
length -= word_len;
buffer = (void *)((intptr_t)buffer + word_len);
address += word_len;
}
}
}
return err;
}
esp_flash_err_t spi_flash_generic_page_program(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length)
{
esp_flash_err_t err;
err = chip->drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
if (err == FLASH_OK) {
err = chip->drv->write_enable(chip);
}
if (err == FLASH_OK) {
// Perform the actual Page Program command
chip->spi->user.usr_dummy = 0;
chip->spi->user1.usr_addr_bitlen = (24 - 1);
chip->spi->addr = (address & ADDRESS_MASK_24BIT) | (length << 24);
// Load data registers, word at a time
int num_words = (length+3) / 4;
for (int i = 0; i < num_words; i++) {
uint32_t word = 0;
uint32_t word_len = MIN(length, sizeof(word));
xthal_memcpy(&word, buffer, word_len);
chip->spi->data_buf[i] = word;
length -= word_len;
buffer = (void *)((intptr_t)buffer + word_len);
}
chip->spi->cmd.flash_pp = 1;
while (chip->spi->cmd.val != 0) { }
err = chip->drv->wait_idle(chip, DEFAULT_PAGE_PROGRAM_TIMEOUT);
}
return err;
}
esp_flash_err_t spi_flash_generic_write(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length)
{
esp_flash_err_t err = FLASH_OK;
const uint32_t page_size = chip->drv->page_size;
while (err == FLASH_OK && length > 0) {
uint32_t page_len = MIN(MAX_WRITE_BYTES, MIN(page_size, length));
if ((address + page_len) / page_size != address / page_size) {
// Most flash chips can't page write across a page boundary
page_len = page_size - (address % page_size);
}
err = chip->drv->page_program(chip, address, buffer, page_len);
address += page_len;
buffer = (void *)((intptr_t)buffer + page_len);
length -= page_len;
}
return err;
}
esp_flash_err_t spi_flash_generic_write_encrypted(const esp_flash_chip_t *chip, uint32_t address, const void *buffer, uint32_t length)
{
return FLASH_ERR_UNSUPPORTED_HOST; // TODO
}
esp_flash_err_t spi_flash_generic_write_enable(const esp_flash_chip_t *chip)
{
esp_flash_err_t err = FLASH_OK;
err = chip->drv->wait_idle(chip, DEFAULT_IDLE_TIMEOUT);
if (err == FLASH_OK) {
chip->spi->cmd.flash_wren = 1;
while(chip->spi->cmd.val != 0) { }
}
uint8_t status = spi_flash_common_command(chip, CMD_RDSR, 0, 0, 8);
if ((status & SR_WREN) == 0) {
// WREN flag has not been set!
err = FLASH_ERR_NOT_FOUND;
}
return err;
}
esp_flash_err_t spi_flash_generic_wait_host_idle(const esp_flash_chip_t *chip, uint32_t *timeout_ms)
{
while(chip->spi->ext2.st != 0 && *timeout_ms > 0) {
if (*timeout_ms > 1) {
esp_flash_os_functions->delay_ms(1);
}
(*timeout_ms)--;
}
// Not clear if this is necessary, or only necessary if
// chip->spi == SPI1. But probably doesn't hurt...
while(SPI0.ext2.st != 0 && *timeout_ms > 0) {
if (*timeout_ms > 1) {
esp_flash_os_functions->delay_ms(1);
}
(*timeout_ms)--;
}
return (*timeout_ms > 0) ? FLASH_OK : FLASH_ERR_NO_RESPONSE;
}
esp_flash_err_t spi_flash_generic_wait_idle(const esp_flash_chip_t *chip, uint32_t timeout_ms)
{
timeout_ms++; // allow at least one pass before timeout, last one has no sleep cycle
uint8_t status = 0;
while(timeout_ms > 0) {
esp_flash_err_t err = spi_flash_generic_wait_host_idle(chip, &timeout_ms);
if (err != FLASH_OK) {
return err;
}
status = spi_flash_common_command(chip, CMD_RDSR, 0, 0, 8);
if ((status & SR_WIP) == 0) {
break; // Write in progress is complete
}
if (timeout_ms > 1) {
esp_flash_os_functions->delay_ms(1);
}
timeout_ms--;
}
return (timeout_ms > 0) ? FLASH_OK : FLASH_ERR_NO_RESPONSE;
}
esp_flash_err_t spi_flash_common_configure_host_read_mode(const esp_flash_chip_t *chip)
{
int dummy_cyclelen, addr_bitlen, read_command;
switch(chip->read_mode) {
case ESP_FLASH_QIO:
addr_bitlen = 32;
dummy_cyclelen = 4; // TODO check this works
read_command = CMD_FASTRD_QIO;
break;
case ESP_FLASH_QOUT:
addr_bitlen = 24;
dummy_cyclelen = 8; // TODO check this works
read_command = CMD_FASTRD_QUAD;
break;
case ESP_FLASH_DIO:
addr_bitlen = 32;
dummy_cyclelen = 0;
read_command = CMD_FASTRD_DIO;
break;
case ESP_FLASH_DOUT:
addr_bitlen = 24;
dummy_cyclelen = 8;
read_command = CMD_FASTRD_DUAL;
break;
case ESP_FLASH_FASTRD:
addr_bitlen = 24;
dummy_cyclelen = 8;
read_command = CMD_FASTRD;
break;
case ESP_FLASH_SLOWRD:
addr_bitlen = 24;
dummy_cyclelen = 0;
read_command = CMD_READ;
break;
default:
return FLASH_ERR_NOT_INITIALISED;
}
// Add dummy cycles to compensate for GPIO matrix
// latency, if necessary...
if (spi_flash_uses_gpio_matrix(chip)) {
if (chip->speed == ESP_FLASH_80MHZ) {
dummy_cyclelen += 2;
} else if (chip->speed == ESP_FLASH_40MHZ) {
dummy_cyclelen += 1;
}
}
chip->spi->user1.usr_dummy_cyclelen = (dummy_cyclelen - 1);
chip->spi->user1.usr_addr_bitlen = (addr_bitlen - 1);
chip->spi->user2.usr_command_value = read_command;
chip->spi->user2.usr_command_bitlen = (8 - 1);
typeof (chip->spi->user) user = {
.usr_command = 1,
.usr_mosi = 0,
.usr_miso = 1,
.usr_dummy = (dummy_cyclelen > 0) ? 1 : 0,
.usr_addr = 1,
};
chip->spi->user = user;
typeof (chip->spi->ctrl) ctrl = {
.fread_qio = (chip->read_mode == ESP_FLASH_QIO),
.fread_quad = (chip->read_mode == ESP_FLASH_QOUT),
.fread_dio = (chip->read_mode == ESP_FLASH_DIO),
.fread_dual = (chip->read_mode == ESP_FLASH_DOUT),
.fastrd_mode = (chip->read_mode != ESP_FLASH_SLOWRD),
};
chip->spi->ctrl = ctrl;
return FLASH_OK;
}
#include <rom/ets_sys.h>
esp_flash_err_t spi_flash_common_set_read_mode(const esp_flash_chip_t *chip, uint8_t qe_rdsr_command, uint8_t qe_wrsr_command, uint8_t qe_sr_bitwidth, unsigned qe_sr_bit)
{
if (spi_flash_is_quad_mode(chip)) {
// Ensure quad modes are enabled, using the Quad Enable parameters supplied.
unsigned sr = spi_flash_common_command(chip, qe_rdsr_command, 0, 0, qe_sr_bitwidth);
ets_printf("before 0x%x\n", sr);
if ((sr & qe_sr_bit) == 0) {
sr |= qe_sr_bit;
spi_flash_common_command(chip, qe_wrsr_command, sr, qe_sr_bitwidth, 0);
/* Check the new QE bit has stayed set */
sr = spi_flash_common_command(chip, qe_rdsr_command, 0, 0, qe_sr_bitwidth);
ets_printf("after 0x%x\n", sr);
if ((sr & qe_sr_bit) == 0) {
return FLASH_ERR_NO_RESPONSE;
}
}
}
// Configure the host, and return
return spi_flash_common_configure_host_read_mode(chip);
}
esp_flash_err_t spi_flash_generic_set_read_mode(const esp_flash_chip_t *chip)
{
// On "generic" chips, this involves checking
// bit 1 (QE) of RDSR2 (35h) result
// (it works this way on GigaDevice & Fudan Micro chips, probably others...)
const uint8_t BIT_QE = 1<<1;
return spi_flash_common_set_read_mode(chip, CMD_RDSR2, CMD_WRSR2, 8, BIT_QE);
}
bool spi_flash_uses_gpio_matrix(const esp_flash_chip_t *chip)
{
if (chip->pins == NULL) {
return false;
}
if (chip->pins->mosi_io_num != -1
|| chip->pins->miso_io_num != -1
|| chip->pins->sclk_io_num != -1) {
return true;
}
if (spi_flash_is_quad_mode(chip)) {
if (chip->pins->quadwp_io_num != -1
|| chip->pins->quadhd_io_num != -1) {
return true;
}
}
return false;
}
const esp_flash_driver_t esp_flash_generic_chip_driver = {
.probe = spi_flash_generic_probe,
.read_id = spi_flash_generic_read_id,
.detect_size = spi_flash_generic_detect_size,
.erase_chip = spi_flash_generic_erase_chip,
.erase_sector = spi_flash_generic_erase_sector,
.erase_block = spi_flash_generic_erase_block,
.sector_size = 4 * 1024,
.block_erase_size = 64 * 1024,
// TODO: figure out if generic chip-wide protection bits exist across some manufacturers
.get_chip_write_protect = NULL,
.set_chip_write_protect = NULL,
// Chip write protection regions do not appear to be standardised
// at all, this is implemented in chip-specific drivers only.
.num_protectable_regions = 0,
.protectable_regions = NULL,
.get_protected_regions = NULL,
.set_protected_regions = NULL,
.read = spi_flash_generic_read,
.write = spi_flash_generic_write,
.page_program = spi_flash_generic_page_program,
.page_size = 256,
.write_encrypted = spi_flash_generic_write_encrypted,
.write_enable = spi_flash_generic_write_enable,
.wait_idle = spi_flash_generic_wait_idle,
.set_read_mode = spi_flash_generic_set_read_mode,
};

60
components/spi_flash/spi_flash_lowlevel_idf_app.c Normal file
View File

@ -0,0 +1,60 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdarg.h>
#include "spi_flash_lowlevel_driver.h"
#include "rom/ets_sys.h"
#include "esp_attr.h"
#include "esp_spi_flash.h"
static esp_flash_err_t start(const esp_flash_chip_t *chip)
{
if (chip->spi == &SPI1) {
g_flash_guard_default_ops.start();
}
// TODO figure out if we can coexist with the SPI master driver here, for other peripherals
return FLASH_OK;
}
static esp_flash_err_t end(const esp_flash_chip_t *chip)
{
if (chip->spi == &SPI1) {
g_flash_guard_default_ops.end();
}
// TODO figure out if we can coexist with the SPI master driver here, for other peripherals
return FLASH_OK;
}
static esp_flash_err_t delay_ms(unsigned ms)
{
ets_delay_us(1000 * ms);
return FLASH_OK;
}
const esp_flash_os_functions_t default_os_functions = {
.start = start,
.end = end,
.delay_ms = delay_ms,
};
void esp_flash_low_level_app_init()
{
esp_flash_os_functions = &default_os_functions;
}

74
components/spi_flash/spi_flash_lowlevel_issi.c Normal file
View File

@ -0,0 +1,74 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include "spi_flash_lowlevel_driver.h"
#include "spi_flash_lowlevel_generic.h"
/* Driver for ISSI flash chip, as used in ESP32 D2WD */
esp_flash_err_t issi_probe(esp_flash_chip_t *chip, uint32_t flash_id)
{
/* Check manufacturer and product IDs match our desired masks */
const uint8_t MFG_ID = 0x9D;
if (flash_id >> 16 != MFG_ID) {
return FLASH_ERR_NOT_FOUND;
}
const uint16_t FLASH_ID_MASK = 0xCF00;
const uint16_t FLASH_ID_VALUE = 0x4000;
if ((flash_id & FLASH_ID_MASK) != FLASH_ID_VALUE) {
return FLASH_ERR_NOT_FOUND;
}
return FLASH_OK;
}
esp_flash_err_t issi_set_read_mode(const esp_flash_chip_t *chip)
{
/* ISSI uses bit 6 of "basic" SR as Quad Enable */
const uint8_t BIT_QE = 1<<6;
return spi_flash_common_set_read_mode(chip, CMD_RDSR, CMD_WRSR, 8, BIT_QE);
}
const esp_flash_driver_t esp_flash_issi_chip_driver = {
.probe = issi_probe,
.read_id = spi_flash_generic_read_id,
.detect_size = spi_flash_generic_detect_size,
.erase_chip = spi_flash_generic_erase_chip,
.erase_sector = spi_flash_generic_erase_sector,
.erase_block = spi_flash_generic_erase_block,
.sector_size = 4 * 1024,
.block_erase_size = 64 * 1024,
// TODO: support get/set chip write protect for ISSI flash
.get_chip_write_protect = NULL,
.set_chip_write_protect = NULL,
// TODO support protected regions on ISSI flash
.num_protectable_regions = 0,
.protectable_regions = NULL,
.get_protected_regions = NULL,
.set_protected_regions = NULL,
.read = spi_flash_generic_read,
.write = spi_flash_generic_write,
.page_program = spi_flash_generic_page_program,
.page_size = 256,
.write_encrypted = spi_flash_generic_write_encrypted,
.write_enable = spi_flash_generic_write_enable,
.wait_idle = spi_flash_generic_wait_idle,
.set_read_mode = issi_set_read_mode,
};

51
components/spi_flash/spi_flash_lowlevel_noos.c Normal file
View File

@ -0,0 +1,51 @@
// Copyright 2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdarg.h>
#include "spi_flash_lowlevel_driver.h"
#include "rom/ets_sys.h"
#include "rom/cache.h"
#include "esp_attr.h"
#include "esp_spi_flash.h"
static esp_flash_err_t start(const esp_flash_chip_t *chip)
{
if (chip->spi == &SPI1) {
Cache_Read_Disable(0);
Cache_Read_Disable(1);
}
return FLASH_OK;
}
static esp_flash_err_t end(const esp_flash_chip_t *chip)
{
if (chip->spi == &SPI1) {
Cache_Flush(0);
Cache_Flush(1);
Cache_Read_Enable(0);
Cache_Read_Enable(1);
}
return FLASH_OK;
}
static esp_flash_err_t delay_ms(unsigned ms)
{
ets_delay_us(1000 * ms);
return FLASH_OK;
}
const esp_flash_os_functions_t esp_flash_noos_functions = {
.start = start,
.end = end,
.delay_ms = delay_ms,
};

181
components/spi_flash/test/test_low_level.c Normal file
View File

@ -0,0 +1,181 @@
#include <stdio.h>
#include <string.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
#include <unity.h>
#include <spi_flash_lowlevel.h>
#include <esp_attr.h>
#include <test_utils.h>
static uint8_t sector_buf[4096];
TEST_CASE("SPI flash metadata functions", "[spi_flash_ll]")
{
uint32_t id, size;
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read_id(NULL, &id) );
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_detect_size(NULL, &size) );
printf("Flash ID %08x detected size %d bytes\n", id, size);
}
static uint32_t erase_test_region(int num_sectors)
{
const esp_partition_t *part = get_test_data_partition();
uint32_t offs = part->address;
/* chip should be initialised */
TEST_ASSERT(esp_flash_default_chip != NULL
&& esp_flash_default_chip->drv != NULL);
TEST_ASSERT(num_sectors * 4096 <= part->size);
bzero(sector_buf, sizeof(sector_buf));
printf("Erase @ 0x%x...\n", offs);
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_erase_region(NULL, offs, num_sectors * 4096) );
printf("Verify erased...\n");
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, sector_buf, offs, sizeof(sector_buf)) );
printf("Buffer starts 0x%02x 0x%02x 0x%02x 0x%02x\n", sector_buf[0], sector_buf[1], sector_buf[2], sector_buf[3]);
for (int i = 0; i < sizeof(sector_buf); i++) {
TEST_ASSERT_EQUAL_HEX8(0xFF, sector_buf[i]);
}
return offs;
}
TEST_CASE("SPI flash simple read/write", "[spi_flash_ll]")
{
uint32_t offs = erase_test_region(1);
for (int i =0 ; i < sizeof(sector_buf); i++) {
sector_buf[i] = i & 0xFF;
}
printf("Write...\n");
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, offs, sector_buf, sizeof(sector_buf)) );
bzero(sector_buf, sizeof(sector_buf));
printf("Read back...\n");
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, sector_buf, offs, sizeof(sector_buf)) );
printf("Buffer starts 0x%02x 0x%02x 0x%02x 0x%02x\n", sector_buf[0], sector_buf[1], sector_buf[2], sector_buf[3]);
for (int i = 0; i < sizeof(sector_buf); i++) {
TEST_ASSERT_EQUAL_HEX8(i & 0xFF, sector_buf[i]);
}
}
TEST_CASE("SPI flash unaligned read/write", "[spi_flash_ll]")
{
uint32_t offs = erase_test_region(2);
const char *msg = "i am a message";
TEST_ASSERT(strlen(msg)+1 % 4 != 0);
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, offs+1, msg, strlen(msg)+1) );
char buf[strlen(msg) + 1];
memset(buf, 0xEE, sizeof(buf));
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, buf, offs+1, strlen(msg)+1) );
TEST_ASSERT_EQUAL_STRING_LEN(msg, buf, strlen(msg));
TEST_ASSERT(memcmp(buf, msg, strlen(msg)+1) == 0);
}
TEST_CASE("SPI flash single byte reads/writes", "[spi_flash_ll]")
{
uint32_t offs = erase_test_region(2);
for (unsigned v = 0; v < 512; v++) {
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, offs+v, &v, 1) );
}
for (unsigned v = 0; v < 512; v++) {
uint8_t readback;
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, &readback, offs+v, 1) );
TEST_ASSERT_EQUAL_HEX8(v, readback);
}
}
/* this test is notable because it generates a lot of unaligned reads/writes,
and also reads/writes across both a sector boundary & many page boundaries.
*/
TEST_CASE("SPI flash three byte reads/writes", "[spi_flash_ll]")
{
uint32_t offs = erase_test_region(2);
for (uint32_t v = 0; v < 2000; v++) {
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, offs+3*v, &v, 3) );
}
for (uint32_t v = 0; v < 2000; v++) {
uint32_t readback;
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, &readback, offs+3*v, 3) );
TEST_ASSERT_EQUAL_HEX32(v & 0xFFFFFF, readback & 0xFFFFFF);
}
}
TEST_CASE("SPI flash erase large region", "[spi_flash_ll]")
{
const esp_partition_t *part = get_test_data_partition();
/* Write some noise at the start and the end of the region */
const char *ohai = "OHAI";
uint32_t readback;
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, part->address, ohai, 5));
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, part->address + part->size - 5, ohai, 5));
/* sanity check what we just wrote */
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, &readback, part->address + part->size - 5, 4));
TEST_ASSERT_EQUAL_HEX32(*((const uint32_t*)ohai), readback);
/* Erase whole region */
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_erase_region(NULL, part->address, part->size));
/* ensure both areas we wrote are now all-FFs */
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, &readback, part->address, 4));
TEST_ASSERT_EQUAL_HEX32(0xFFFFFFFF, readback);
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(NULL, &readback, part->address + part->size - 5, 4));
TEST_ASSERT_EQUAL_HEX32(0xFFFFFFFF, readback);
}
TEST_CASE("SPI flash test reading with all speed/mode permutations", "[spi_flash_ll]")
{
/* Note: this only works if the SPI flash chip supports all these modes & speeds */
uint32_t offs = erase_test_region(1);
/* Write some test data */
const char *message = "This is some test data.";
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_write(NULL, offs, message, strlen(message)+1) );
// Start by copying the default chip to a structure we can tweak
esp_flash_chip_t chip = *esp_flash_default_chip;
for (chip.read_mode = 0;
chip.read_mode != ESP_FLASH_READ_MODE_MAX;
chip.read_mode++) {
for (chip.speed = 0;
chip.speed != ESP_FLASH_SPEED_MAX;
chip.speed++) {
printf("mode %d speed %d\n", chip.read_mode, chip.speed);
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_init(&chip) );
char *buf[strlen(message)+1];
memset(buf, 0xFF, sizeof(buf));
TEST_ASSERT_EQUAL(FLASH_OK, esp_flash_read(&chip, buf, offs, sizeof(buf)) );
TEST_ASSERT_EQUAL_STRING_LEN(message, buf, strlen(message));
}
}
}