mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
spi_flash_test: remove threshold from unit test
This commit is contained in:
Michael (XIAO Xufeng)
parent
39f39ac53d
commit
cc2c92a7ab
@ -33,87 +33,6 @@
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING 30
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA 27
|
||||
|
||||
/*
|
||||
* Flash Performance value
|
||||
* 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
|
||||
* These thresholds are set to about 70% of the average test data, under certain condition.
|
||||
* Contact Espressif for details.
|
||||
*/
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
//Collect data and correct it later
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B 35300
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB (697*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB (6780*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE 11200
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B 20100
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B 35200
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB (754*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB (6650*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE 45300
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B 16200
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
|
||||
//The single_core config is much faster than other configs. Use the value of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B 33600
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB (484*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB (1512*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE 49600
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B 73500
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B (261*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB (470*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB (261*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE 30900
|
||||
#endif
|
||||
|
||||
// floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV 70
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT 140
|
||||
|
||||
@ -29,85 +29,6 @@
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING 32
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA 30
|
||||
|
||||
/*
|
||||
* Flash Performance value
|
||||
* 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
|
||||
* These thresholds are set to about 70% of the average test data, under certain condition.
|
||||
* Contact Espressif for details.
|
||||
*/
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
|
||||
// rom options is much slower. use its 70%
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B 42200
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
|
||||
// legacy & suspend config are much faster. use the 70% of slower configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B (179*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB (622*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB (6536*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE 23700
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B 46400
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
|
||||
// legacy & suspend config are much faster. use the 70% of slower configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B (183*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB (605*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB (6676*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE 22900
|
||||
#endif
|
||||
|
||||
// No SPI1 tests for C3
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE 0
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B 43300
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
|
||||
// rom options is much slower. use its 70%
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B 99500
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB (300*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB (754*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE 33900
|
||||
#endif
|
||||
|
||||
// floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV 70
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT 140
|
||||
|
||||
@ -25,82 +25,3 @@
|
||||
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING 32
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA 30
|
||||
|
||||
/*
|
||||
* Flash Performance value
|
||||
* 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
|
||||
* These thresholds are set to about 70% of the average test data, under certain condition.
|
||||
* Contact Espressif for details.
|
||||
*/
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
|
||||
//Great variation, use the 70% of min value
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B 33300
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
|
||||
// legacy config is much faster. use the 70% of slower configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B (239*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
|
||||
// Weird data. Use 70% average of slower configs.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB (546*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB (1191*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE 19500
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
|
||||
//release config is much faster than other configs. Use 70% average of other configs
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B 46300
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B (249*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB (851*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB (11480*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE 40100
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B 30500
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B (183*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB (474*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB (1283*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE 44100
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B 47800
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B (252*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
|
||||
// write with large RAM buffer tests has lower performance value than normal performance tests
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB (398*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB (1204*1000)
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE 22100
|
||||
#endif
|
||||
|
||||
@ -24,82 +24,6 @@
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING 32
|
||||
#define IDF_PERFORMANCE_MAX_SPI_PER_TRANS_NO_POLLING_NO_DMA 30
|
||||
|
||||
/*
|
||||
* Flash Performance value
|
||||
* 4 subsections: legacy, normal (new driver after v4.0), SPI1 (external but on SPI1), external (SPI2)
|
||||
* These thresholds are set to about 70% of the average test data, under certain condition.
|
||||
* Contact Espressif for details.
|
||||
*
|
||||
* Currently all performance data on S3 are set to 0 for now. Update to a proper value later.
|
||||
*/
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_WR_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_RD_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE 0
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_WR_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_RD_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_ERASE 0
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_WR_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_RD_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_SPI1_ERASE 0
|
||||
#endif
|
||||
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_4B 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_WR_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_RD_2KB 0
|
||||
#endif
|
||||
#ifndef IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE
|
||||
//erase performance is highly depending on the chip vendor. Use 70% of the minimal value.
|
||||
#define IDF_PERFORMANCE_MIN_FLASH_SPEED_BYTE_PER_SEC_EXT_ERASE 0
|
||||
#endif
|
||||
|
||||
// floating point instructions per divide and per sqrt (configured for worst-case with PSRAM workaround)
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_DIV 70
|
||||
#define IDF_PERFORMANCE_MAX_CYCLES_PER_SQRT 140
|
||||
|
||||
@ -1044,6 +1044,37 @@ static uint32_t measure_read(const char* name, const esp_partition_t* part, uint
|
||||
return time_measure_end(&time_ctx);
|
||||
}
|
||||
|
||||
static const char* get_chip_vendor(uint32_t id)
|
||||
{
|
||||
switch (id)
|
||||
{
|
||||
case 0x20:
|
||||
return "XMC";
|
||||
break;
|
||||
case 0x68:
|
||||
return "BOYA";
|
||||
break;
|
||||
case 0xC8:
|
||||
return "GigaDevice";
|
||||
break;
|
||||
case 0x9D:
|
||||
return "ISSI";
|
||||
break;
|
||||
case 0xC2:
|
||||
return "MXIC";
|
||||
break;
|
||||
case 0xEF:
|
||||
return "Winbond";
|
||||
break;
|
||||
case 0xA1:
|
||||
return "Fudan Micro";
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return "generic";
|
||||
}
|
||||
|
||||
#define MEAS_WRITE(n) (measure_write("write in "#n"-byte chunks", part, data_to_write, n))
|
||||
#define MEAS_READ(n) (measure_read("read in "#n"-byte chunks", part, data_read, n))
|
||||
|
||||
@ -1068,37 +1099,35 @@ static void test_flash_read_write_performance(const esp_partition_t *part)
|
||||
|
||||
TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);
|
||||
|
||||
#if !CONFIG_SPIRAM && !CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
|
||||
# define CHECK_DATA(bus, suffix) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##suffix, "%d", speed_##suffix)
|
||||
# define CHECK_ERASE(bus, var) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##ERASE, "%d", var)
|
||||
#else
|
||||
# define CHECK_DATA(bus, suffix) ((void)speed_##suffix)
|
||||
# define CHECK_ERASE(bus, var) ((void)var)
|
||||
#endif
|
||||
#define LOG_DATA(bus, suffix, chip) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_"#bus#suffix, "%d, flash_chip: %s", speed_##suffix, chip)
|
||||
#define LOG_ERASE(bus, var, chip) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_"#bus"ERASE", "%d, flash_chip: %s", var, chip)
|
||||
|
||||
// Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
|
||||
#define CHECK_PERFORMANCE(bus) do {\
|
||||
CHECK_DATA(bus, WR_4B); \
|
||||
CHECK_DATA(bus, RD_4B); \
|
||||
CHECK_DATA(bus, WR_2KB); \
|
||||
CHECK_DATA(bus, RD_2KB); \
|
||||
CHECK_ERASE(bus, erase_1); \
|
||||
CHECK_ERASE(bus, erase_2); \
|
||||
#define LOG_PERFORMANCE(bus, chip) do {\
|
||||
LOG_DATA(bus, WR_4B, chip); \
|
||||
LOG_DATA(bus, RD_4B, chip); \
|
||||
LOG_DATA(bus, WR_2KB, chip); \
|
||||
LOG_DATA(bus, RD_2KB, chip); \
|
||||
LOG_ERASE(bus, erase_1, chip); \
|
||||
LOG_ERASE(bus, erase_2, chip); \
|
||||
} while (0)
|
||||
|
||||
spi_host_device_t host_id;
|
||||
int cs_id;
|
||||
uint32_t id;
|
||||
esp_flash_read_id(chip, &id);
|
||||
const char *chip_name = get_chip_vendor(id >> 16);
|
||||
|
||||
get_chip_host(chip, &host_id, &cs_id);
|
||||
if (host_id != SPI1_HOST) {
|
||||
// Chips on other SPI buses
|
||||
CHECK_PERFORMANCE(EXT_);
|
||||
LOG_PERFORMANCE(EXT_, chip_name);
|
||||
} else if (cs_id == 0) {
|
||||
// Main flash
|
||||
CHECK_PERFORMANCE();
|
||||
LOG_PERFORMANCE(,chip_name);
|
||||
} else {
|
||||
// Other cs pins on SPI1
|
||||
CHECK_PERFORMANCE(SPI1_);
|
||||
LOG_PERFORMANCE(SPI1_, chip_name);
|
||||
}
|
||||
free(data_to_write);
|
||||
free(data_read);
|
||||
|
||||
@ -312,23 +312,17 @@ TEST_CASE("Test spi_flash read/write performance", "[spi_flash]")
|
||||
|
||||
TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);
|
||||
|
||||
// Data checks are disabled when PSRAM is used or in Freertos compliance check test
|
||||
#if !CONFIG_SPIRAM && !CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
|
||||
# define CHECK_DATA(suffix) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_LEGACY_##suffix, "%d", speed_##suffix)
|
||||
# define CHECK_ERASE(var) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE, "%d", var)
|
||||
#else
|
||||
# define CHECK_DATA(suffix) ((void)speed_##suffix)
|
||||
# define CHECK_ERASE(var) ((void)var)
|
||||
#endif
|
||||
#define LOG_DATA(suffix) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_"#suffix, "%d", speed_##suffix)
|
||||
#define LOG_ERASE(var) IDF_LOG_PERFORMANCE("FLASH_SPEED_BYTE_PER_SEC_LEGACY_ERASE", "%d", var)
|
||||
|
||||
CHECK_DATA(WR_4B);
|
||||
CHECK_DATA(RD_4B);
|
||||
CHECK_DATA(WR_2KB);
|
||||
CHECK_DATA(RD_2KB);
|
||||
LOG_DATA(WR_4B);
|
||||
LOG_DATA(RD_4B);
|
||||
LOG_DATA(WR_2KB);
|
||||
LOG_DATA(RD_2KB);
|
||||
|
||||
// Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
|
||||
CHECK_ERASE(erase_1);
|
||||
CHECK_ERASE(erase_2);
|
||||
LOG_ERASE(erase_1);
|
||||
LOG_ERASE(erase_2);
|
||||
|
||||
free(data_to_write);
|
||||
free(data_read);
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user