doc: fix wrong register description regarding to ethernet SMI

components/soc/esp32/include/soc/emac_mac_struct.h

@@ -79,7 +79,7 @@ typedef volatile struct {
         struct {
             uint32_t miibusy : 1;   /*This bit should read logic 0 before writing to PHY Addr Register and PHY data Register.During a PHY register access  the software sets this bit to 1'b1 to indicate that a Read or Write access is in progress. PHY data Register is invalid until this bit is cleared by the MAC. Therefore PHY data Register (MII Data) should be kept valid until the MAC clears this bit during a PHY Write operation. Similarly for a read operation  the contents of Register 5 are not valid until this bit is cleared. The subsequent read or write operation should happen only after the previous operation is complete. Because there is no acknowledgment from the PHY to MAC after a read or write operation is completed  there is no change in the functionality of this bit even when the PHY is not Present.*/
             uint32_t miiwrite : 1;  /*When set  this bit indicates to the PHY that this is a Write operation using the MII Data register. If this bit is not set  it indicates that this is a Read operation  that is  placing the data in the MII Data register.*/
-            uint32_t miicsrclk : 4; /*CSR clock range: 1.0 MHz ~ 2.5 MHz.  4'b0000: When the APB clock frequency is 80 MHz  the MDC clock frequency is APB CLK/42  4'b0000: When the APB clock frequency is 40 MHz  the MDC clock frequency is APB CLK/26.*/
+            uint32_t miicsrclk : 4; /*CSR clock range: 1.0 MHz ~ 2.5 MHz.  4'b0000: When the APB clock frequency is 80 MHz  the MDC clock frequency is APB CLK/42  4'b0011: When the APB clock frequency is 40 MHz  the MDC clock frequency is APB CLK/26.*/
             uint32_t miireg : 5;    /*These bits select the desired MII register in the selected PHY device.*/
             uint32_t miidev : 5;    /*This field indicates which of the 32 possible PHY devices are being accessed.*/
             uint32_t reserved16 : 16;