support esp32 eco revision 2 and 3

Kconfig

@@ -8,6 +8,10 @@ config IDF_CMAKE
     bool
     option env="IDF_CMAKE"
 
+config IDF_FIRMWARE_CHIP_ID
+    hex
+    default 0x0000
+
 menu "SDK tool configuration"
 config TOOLPREFIX
     string "Compiler toolchain path/prefix"

components/app_update/esp_ota_ops.c

@@ -146,7 +146,7 @@ esp_err_t esp_ota_write(esp_ota_handle_t handle, const void *data, size_t size)
             // must erase the partition before writing to it
             assert(it->erased_size > 0 && "must erase the partition before writing to it");
             if (it->wrote_size == 0 && it->partial_bytes == 0 && size > 0 && data_bytes[0] != ESP_IMAGE_HEADER_MAGIC) {
-                ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x", data_bytes[0]);
+                ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x)", data_bytes[0]);
                 return ESP_ERR_OTA_VALIDATE_FAILED;
             }
 

components/bootloader_support/include/bootloader_common.h

@@ -14,6 +14,7 @@
 
 #pragma once
 #include "esp_flash_data_types.h"
+#include "esp_image_format.h"
 
 /// Type of hold a GPIO in low state
 typedef enum {
@@ -68,3 +69,13 @@ bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_dat
  * @return    Returns true if the list contains the label, false otherwise.
  */
 bool bootloader_common_label_search(const char *list, char *label);
+
+/**
+ * @brief Check if the image (bootloader and application) has valid chip ID and revision
+ *
+ * @param img_hdr: image header
+ * @return
+ *      - ESP_OK: image and chip are matched well
+ *      - ESP_FAIL: image doesn't match to the chip
+ */
+esp_err_t bootloader_common_check_chip_validity(const esp_image_header_t* img_hdr);

components/bootloader_support/include/esp_efuse.h

@@ -91,6 +91,13 @@ esp_err_t esp_efuse_apply_34_encoding(const uint8_t *in_bytes, uint32_t *out_wor
  */
 void esp_efuse_write_random_key(uint32_t blk_wdata0_reg);
 
+/**
+ * @brief   Returns chip version from efuse
+ *
+ * @return chip version
+ */
+uint8_t esp_efuse_get_chip_ver(void);
+
 #ifdef __cplusplus
 }
 #endif

components/bootloader_support/include/esp_image_format.h

@@ -55,6 +55,19 @@ typedef enum {
 
 #define ESP_IMAGE_HEADER_MAGIC 0xE9
 
+/**
+ * @brief ESP chip ID
+ *
+ */
+typedef enum {
+    ESP_CHIP_ID_ESP32 = 0x0000,  /*!< chip ID: ESP32 */
+    ESP_CHIP_ID_INVALID = 0xFFFF /*!< Invalid chip ID (we defined it to make sure the esp_chip_id_t is 2 bytes size) */
+} __attribute__((packed)) esp_chip_id_t;
+
+/** @cond */
+_Static_assert(sizeof(esp_chip_id_t) == 2, "esp_chip_id_t should be 16 bit");
+
+
 /* Main header of binary image */
 typedef struct {
     uint8_t magic;
@@ -71,8 +84,12 @@ typedef struct {
     uint8_t wp_pin;
     /* Drive settings for the SPI flash pins (read by ROM bootloader) */
     uint8_t spi_pin_drv[3];
-    /* Reserved bytes in ESP32 additional header space, currently unused */
+    /*!< Chip identification number */
-    uint8_t reserved[11];
+    esp_chip_id_t chip_id;
+    /*!< Minimum chip revision supported by image */
+    uint8_t min_chip_rev;
+    /*!< Reserved bytes in additional header space, currently unused */
+    uint8_t reserved[8];
     /* If 1, a SHA256 digest "simple hash" (of the entire image) is appended after the checksum. Included in image length. This digest
      * is separate to secure boot and only used for detecting corruption. For secure boot signed images, the signature
      * is appended after this (and the simple hash is included in the signed data). */

components/bootloader_support/src/bootloader_common.c

@@ -28,6 +28,8 @@
 #include "bootloader_common.h"
 #include "soc/gpio_periph.h"
 #include "soc/spi_reg.h"
+#include "esp_image_format.h"
+#include "esp_efuse.h"
 
 static const char* TAG = "boot_comm";
 
@@ -146,3 +148,23 @@ bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_dat
 
     return ret;
 }
+
+esp_err_t bootloader_common_check_chip_validity(const esp_image_header_t* img_hdr)
+{
+    esp_err_t err = ESP_OK;
+    esp_chip_id_t chip_id = CONFIG_IDF_FIRMWARE_CHIP_ID;
+    if (chip_id != img_hdr->chip_id) {
+        ESP_LOGE(TAG, "image has invalid chip ID, expected at least %d, found %d", chip_id, img_hdr->chip_id);
+        err = ESP_FAIL;
+    }
+    uint8_t revision = esp_efuse_get_chip_ver();
+    if (revision < img_hdr->min_chip_rev) {
+        ESP_LOGE(TAG, "image has invalid chip revision, expected at least %d, found %d", revision, img_hdr->min_chip_rev);
+        err = ESP_FAIL;
+    } else if (revision != img_hdr->min_chip_rev) {
+        ESP_LOGI(TAG, "This chip is revision %d but project was configured for minimum revision %d. "\
+                 "Suggest setting project minimum revision to %d if safe to do so.",
+                 revision, img_hdr->min_chip_rev, revision);
+    }
+    return err;
+}

components/bootloader_support/src/bootloader_init.c

@@ -17,6 +17,7 @@
 #include <sys/param.h>
 
 #include "esp_attr.h"
+#include "esp_efuse.h"
 #include "esp_log.h"
 
 #include "rom/cache.h"
@@ -126,6 +127,12 @@ static esp_err_t bootloader_main()
         ESP_LOGE(TAG, "failed to load bootloader header!");
         return ESP_FAIL;
     }
+    /* Check chip ID and minimum chip revision that supported by this image */
+    uint8_t revision = esp_efuse_get_chip_ver();
+    ESP_LOGI(TAG, "Chip Revision: %d", revision);
+    if (bootloader_common_check_chip_validity(&fhdr) != ESP_OK) {
+        return ESP_FAIL;
+    }
     bootloader_init_flash_configure(&fhdr);
 #if (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ == 240)
     //Check if ESP32 is rated for a CPU frequency of 160MHz only

components/bootloader_support/src/efuse.c

@@ -15,6 +15,7 @@
 #include "esp_log.h"
 #include <string.h>
 #include "bootloader_random.h"
+#include "soc/apb_ctrl_reg.h"
 
 #define EFUSE_CONF_WRITE 0x5A5A /* efuse_pgm_op_ena, force no rd/wr disable */
 #define EFUSE_CONF_READ 0x5AA5 /* efuse_read_op_ena, release force */
@@ -112,3 +113,32 @@ void esp_efuse_write_random_key(uint32_t blk_wdata0_reg)
     bzero(buf, sizeof(buf));
     bzero(raw, sizeof(raw));
 }
+
+// Returns chip version from efuse
+uint8_t esp_efuse_get_chip_ver(void)
+{
+    uint8_t eco_bit0, eco_bit1, eco_bit2;
+    eco_bit0 = (REG_READ(EFUSE_BLK0_RDATA3_REG) & 0xF000) >> 15;
+    eco_bit1 = (REG_READ(EFUSE_BLK0_RDATA5_REG) & 0x100000) >> 20;
+    eco_bit2 = (REG_READ(APB_CTRL_DATE_REG) & 0x80000000) >> 31;
+    uint32_t combine_value = (eco_bit2 << 2) | (eco_bit1 << 1) | eco_bit0;
+    uint8_t chip_ver = 0;
+    switch (combine_value) {
+    case 0:
+        chip_ver = 0;
+        break;
+    case 1:
+        chip_ver = 1;
+        break;
+    case 3:
+        chip_ver = 2;
+        break;
+    case 7:
+        chip_ver = 3;
+        break;
+    default:
+        chip_ver = 0;
+        break;
+    }
+    return chip_ver;
+}

components/bootloader_support/src/esp_image_format.c

@@ -24,6 +24,7 @@
 #include <bootloader_random.h>
 #include <bootloader_sha.h>
 #include "bootloader_util.h"
+#include "bootloader_common.h"
 
 /* Checking signatures as part of verifying images is necessary:
    - Always if secure boot is enabled
@@ -253,6 +254,9 @@ static esp_err_t verify_image_header(uint32_t src_addr, const esp_image_header_t
         }
         err = ESP_ERR_IMAGE_INVALID;
     }
+    if (bootloader_common_check_chip_validity(image) != ESP_OK) {
+        err = ESP_ERR_IMAGE_INVALID;
+    }
     if (!silent) {
         if (image->spi_mode > ESP_IMAGE_SPI_MODE_SLOW_READ) {
             ESP_LOGW(TAG, "image at 0x%x has invalid SPI mode %d", src_addr, image->spi_mode);

components/esp32/Kconfig

@@ -1,5 +1,33 @@
 menu "ESP32-specific"
 
+choice ESP32_REV_MIN
+    prompt "Minimum Supported ESP32 Revision"
+    default ESP32_REV_MIN_0
+    help
+        Minimum revision that ESP-IDF would support.
+        ESP-IDF performs different strategy on different esp32 revision.
+
+    config ESP32_REV_MIN_0
+        bool "Rev 0"
+    config ESP32_REV_MIN_1
+        bool "Rev 1"
+    config ESP32_REV_MIN_2
+        bool "Rev 2"
+    config ESP32_REV_MIN_3
+        bool "Rev 3"
+endchoice
+
+config ESP32_REV_MIN
+    int
+    default 0 if ESP32_REV_MIN_0
+    default 1 if ESP32_REV_MIN_1
+    default 2 if ESP32_REV_MIN_2
+    default 3 if ESP32_REV_MIN_3
+
+config ESP32_DPORT_WORKAROUND
+    bool
+    default "y" if !FREERTOS_UNICORE  && ESP32_REV_MIN < 2
+
 choice ESP32_DEFAULT_CPU_FREQ_MHZ
     prompt "CPU frequency"
     default ESP32_DEFAULT_CPU_FREQ_160
@@ -121,7 +149,6 @@ config SPIRAM_CACHE_WORKAROUND
         This will also not use any bits of newlib that are located in ROM, opting for a version that is compiled
         with the workaround and located in flash instead.
 
-
 config SPIRAM_MALLOC_ALWAYSINTERNAL
     int "Maximum malloc() size, in bytes, to always put in internal memory"
     depends on SPIRAM_USE_MALLOC

components/esp32/dport_access.c

@@ -249,7 +249,7 @@ void IRAM_ATTR esp_dport_access_read_buffer(uint32_t *buff_out, uint32_t address
  */
 uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     uint32_t apb;
@@ -295,7 +295,7 @@ uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
  */
 uint32_t IRAM_ATTR esp_dport_access_sequence_reg_read(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     uint32_t apb;

components/esp32/include/esp_dport_access.h

@@ -33,7 +33,7 @@ uint32_t esp_dport_access_sequence_reg_read(uint32_t reg);
 //only call in case of panic().
 void esp_dport_access_int_abort(void);
 
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
 #define DPORT_STALL_OTHER_CPU_START()
 #define DPORT_STALL_OTHER_CPU_END()
 #define DPORT_INTERRUPT_DISABLE()

components/esp32/system_api.c

@@ -16,6 +16,7 @@
 
 #include "esp_system.h"
 #include "esp_attr.h"
+#include "esp_efuse.h"
 #include "esp_wifi.h"
 #include "esp_wifi_internal.h"
 #include "esp_log.h"
@@ -377,35 +378,27 @@ const char* esp_get_idf_version(void)
     return IDF_VER;
 }
 
-static void get_chip_info_esp32(esp_chip_info_t* out_info)
+void esp_chip_info(esp_chip_info_t* out_info)
 {
-    uint32_t reg = REG_READ(EFUSE_BLK0_RDATA3_REG);
+    uint32_t efuse_rd3 = REG_READ(EFUSE_BLK0_RDATA3_REG);
     memset(out_info, 0, sizeof(*out_info));
 
     out_info->model = CHIP_ESP32;
-    if ((reg & EFUSE_RD_CHIP_VER_REV1_M) != 0) {
+    out_info->revision = esp_efuse_get_chip_ver();
-        out_info->revision = 1;
+
-    }
+    if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
-    if ((reg & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
         out_info->cores = 2;
     } else {
         out_info->cores = 1;
     }
     out_info->features = CHIP_FEATURE_WIFI_BGN;
-    if ((reg & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
+    if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
         out_info->features |= CHIP_FEATURE_BT | CHIP_FEATURE_BLE;
     }
-    int package = (reg & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
+    int package = (efuse_rd3 & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
     if (package == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
         package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
         package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
         out_info->features |= CHIP_FEATURE_EMB_FLASH;
     }
 }
-
-void esp_chip_info(esp_chip_info_t* out_info)
-{
-    // Only ESP32 is supported now, in the future call one of the
-    // chip-specific functions based on sdkconfig choice
-    return get_chip_info_esp32(out_info);
-}

components/esptool_py/Makefile.projbuild

@@ -31,6 +31,10 @@ endif
 
 ESPTOOL_ELF2IMAGE_OPTIONS :=
 
+ifdef CONFIG_ESP32_REV_MIN
+ESPTOOL_ELF2IMAGE_OPTIONS += --min-rev $(CONFIG_ESP32_REV_MIN)
+endif
+
 ifdef CONFIG_SECURE_BOOT_ENABLED
 ifndef CONFIG_SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
 ifndef IS_BOOTLOADER_BUILD

components/esptool_py/esptool

@@ -1 +1 @@
-Subproject commit 9ad444a6e06e58833d5e6044c1d5f3eb3dd56023
+Subproject commit 4f1e825d2d1ee33b896b3977905fb29ac6cc0794

components/esptool_py/project_include.cmake

@@ -16,6 +16,10 @@ set(ESPTOOLPY_ELF2IMAGE_FLASH_OPTIONS
     --flash_size ${ESPFLASHSIZE}
     )
 
+if(CONFIG_ESP32_REV_MIN)
+    set(ESPTOOLPY_ELF2IMAGE_OPTIONS ${ESPTOOLPY_ELF2IMAGE_OPTIONS} --min-rev ${CONFIG_ESP32_REV_MIN})
+endif()
+
 if(CONFIG_ESPTOOLPY_FLASHSIZE_DETECT)
     # Set ESPFLASHSIZE to 'detect' *after* elf2image options are generated,
     # as elf2image can't have 'detect' as an option...

components/soc/esp32/include/soc/dport_access.h

@@ -73,7 +73,7 @@ extern "C" {
  */
 static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_reg_read(reg);
@@ -106,7 +106,7 @@ static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
  */
 static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_sequence_reg_read(reg);
@@ -166,7 +166,7 @@ static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
  */
 static inline uint32_t IRAM_ATTR DPORT_READ_PERI_REG(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_reg_read(reg);

components/soc/esp32/include/soc/soc.h

@@ -150,7 +150,7 @@
 
 #define IS_DPORT_REG(_r) (((_r) >= DR_REG_DPORT_BASE) && (_r) <= DR_REG_DPORT_END)
 
-#if !defined( BOOTLOADER_BUILD ) && !defined( CONFIG_FREERTOS_UNICORE ) && defined( ESP_PLATFORM )
+#if !defined( BOOTLOADER_BUILD ) && defined( CONFIG_ESP32_DPORT_WORKAROUND ) && defined( ESP_PLATFORM )
 #define ASSERT_IF_DPORT_REG(_r, OP)  TRY_STATIC_ASSERT(!IS_DPORT_REG(_r), (Cannot use OP for DPORT registers use DPORT_##OP));
 #else
 #define ASSERT_IF_DPORT_REG(_r, OP)