alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

support esp32 eco revision 2 and 3

Browse Source
This commit is contained in:
suda-morris 2019-09-18 13:25:50 +08:00
parent d6e333f014
commit c0a5cb07cd
18 changed files with 230 additions and 100 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Kconfig
View File

@ -8,6 +8,10 @@ config IDF_CMAKE
bool
option env="IDF_CMAKE"
config IDF_FIRMWARE_CHIP_ID
hex
default 0x0000
menu "SDK tool configuration"
config TOOLPREFIX
string "Compiler toolchain path/prefix"
@ -132,17 +136,17 @@ choice STACK_CHECK_MODE
- In NORMAL mode (GCC flag: -fstack-protector) only functions that call alloca,
and functions with buffers larger than 8 bytes are protected.
- STRONG mode (GCC flag: -fstack-protector-strong) is like NORMAL, but includes
additional functions to be protected -- those that have local array definitions,
or have references to local frame addresses.
- In OVERALL mode (GCC flag: -fstack-protector-all) all functions are protected.
Modes have the following impact on code performance and coverage:
- performance: NORMAL > STRONG > OVERALL
- coverage: NORMAL < STRONG < OVERALL

12
components/app_update/esp_ota_ops.c
View File

@ -38,9 +38,9 @@
#include "esp_log.h"
#define OTA_MAX(a,b) ((a) >= (b) ? (a) : (b))
#define OTA_MIN(a,b) ((a) <= (b) ? (a) : (b))
#define SUB_TYPE_ID(i) (i & 0x0F)
#define OTA_MAX(a,b) ((a) >= (b) ? (a) : (b))
#define OTA_MIN(a,b) ((a) <= (b) ? (a) : (b))
#define SUB_TYPE_ID(i) (i & 0x0F)
typedef struct ota_ops_entry_ {
uint32_t handle;
@ -146,7 +146,7 @@ esp_err_t esp_ota_write(esp_ota_handle_t handle, const void *data, size_t size)
// must erase the partition before writing to it
assert(it->erased_size > 0 && "must erase the partition before writing to it");
if (it->wrote_size == 0 && it->partial_bytes == 0 && size > 0 && data_bytes[0] != ESP_IMAGE_HEADER_MAGIC) {
ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x", data_bytes[0]);
ESP_LOGE(TAG, "OTA image has invalid magic byte (expected 0xE9, saw 0x%02x)", data_bytes[0]);
return ESP_ERR_OTA_VALIDATE_FAILED;
}
@ -302,10 +302,10 @@ static esp_err_t esp_rewrite_ota_data(esp_partition_subtype_t subtype)
//named data in first sector as s_ota_select[0], second sector data as s_ota_select[1]
//e.g.
//if s_ota_select[0].ota_seq == s_ota_select[1].ota_seq == 0xFFFFFFFF,means ota info partition is in init status
//so it will boot factory application(if there is),if there's no factory application,it will boot ota[0] application
//so it will boot factory application(if there is),if there's no factory application,it will boot ota[0] application
//if s_ota_select[0].ota_seq != 0 and s_ota_select[1].ota_seq != 0,it will choose a max seq ,and get value of max_seq%max_ota_app_number
//and boot a subtype (mask 0x0F) value is (max_seq - 1)%max_ota_app_number,so if want switch to run ota[x],can use next formulas.
//for example, if s_ota_select[0].ota_seq = 4, s_ota_select[1].ota_seq = 5, and there are 8 ota application,
//for example, if s_ota_select[0].ota_seq = 4, s_ota_select[1].ota_seq = 5, and there are 8 ota application,
//current running is (5-1)%8 = 4,running ota[4],so if we want to switch to run ota[7],
//we should add s_ota_select[0].ota_seq (is 4) to 4 ,(8-1)%8=7,then it will boot ota[7]
//if A=(B - C)%D

11
components/bootloader_support/include/bootloader_common.h
View File

@ -14,6 +14,7 @@
#pragma once
#include "esp_flash_data_types.h"
#include "esp_image_format.h"
/// Type of hold a GPIO in low state
typedef enum {
@ -68,3 +69,13 @@ bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_dat
* @return Returns true if the list contains the label, false otherwise.
*/
bool bootloader_common_label_search(const char *list, char *label);
/**
* @brief Check if the image (bootloader and application) has valid chip ID and revision
*
* @param img_hdr: image header
* @return
* - ESP_OK: image and chip are matched well
* - ESP_FAIL: image doesn't match to the chip
*/
esp_err_t bootloader_common_check_chip_validity(const esp_image_header_t* img_hdr);

7
components/bootloader_support/include/esp_efuse.h
View File

@ -91,6 +91,13 @@ esp_err_t esp_efuse_apply_34_encoding(const uint8_t *in_bytes, uint32_t *out_wor
*/
void esp_efuse_write_random_key(uint32_t blk_wdata0_reg);
/**
* @brief Returns chip version from efuse
*
* @return chip version
*/
uint8_t esp_efuse_get_chip_ver(void);
#ifdef __cplusplus
}
#endif

21
components/bootloader_support/include/esp_image_format.h
View File

@ -55,6 +55,19 @@ typedef enum {
#define ESP_IMAGE_HEADER_MAGIC 0xE9
/**
* @brief ESP chip ID
*
*/
typedef enum {
ESP_CHIP_ID_ESP32 = 0x0000, /*!< chip ID: ESP32 */
ESP_CHIP_ID_INVALID = 0xFFFF /*!< Invalid chip ID (we defined it to make sure the esp_chip_id_t is 2 bytes size) */
} __attribute__((packed)) esp_chip_id_t;
/** @cond */
_Static_assert(sizeof(esp_chip_id_t) == 2, "esp_chip_id_t should be 16 bit");
/* Main header of binary image */
typedef struct {
uint8_t magic;
@ -71,8 +84,12 @@ typedef struct {
uint8_t wp_pin;
/* Drive settings for the SPI flash pins (read by ROM bootloader) */
uint8_t spi_pin_drv[3];
/* Reserved bytes in ESP32 additional header space, currently unused */
uint8_t reserved[11];
/*!< Chip identification number */
esp_chip_id_t chip_id;
/*!< Minimum chip revision supported by image */
uint8_t min_chip_rev;
/*!< Reserved bytes in additional header space, currently unused */
uint8_t reserved[8];
/* If 1, a SHA256 digest "simple hash" (of the entire image) is appended after the checksum. Included in image length. This digest
* is separate to secure boot and only used for detecting corruption. For secure boot signed images, the signature
* is appended after this (and the simple hash is included in the signed data). */

22
components/bootloader_support/src/bootloader_common.c
View File

@ -28,6 +28,8 @@
#include "bootloader_common.h"
#include "soc/gpio_periph.h"
#include "soc/spi_reg.h"
#include "esp_image_format.h"
#include "esp_efuse.h"
static const char* TAG = "boot_comm";
@ -146,3 +148,23 @@ bool bootloader_common_erase_part_type_data(const char *list_erase, bool ota_dat
return ret;
}
esp_err_t bootloader_common_check_chip_validity(const esp_image_header_t* img_hdr)
{
esp_err_t err = ESP_OK;
esp_chip_id_t chip_id = CONFIG_IDF_FIRMWARE_CHIP_ID;
if (chip_id != img_hdr->chip_id) {
ESP_LOGE(TAG, "image has invalid chip ID, expected at least %d, found %d", chip_id, img_hdr->chip_id);
err = ESP_FAIL;
}
uint8_t revision = esp_efuse_get_chip_ver();
if (revision < img_hdr->min_chip_rev) {
ESP_LOGE(TAG, "image has invalid chip revision, expected at least %d, found %d", revision, img_hdr->min_chip_rev);
err = ESP_FAIL;
} else if (revision != img_hdr->min_chip_rev) {
ESP_LOGI(TAG, "This chip is revision %d but project was configured for minimum revision %d. "\
"Suggest setting project minimum revision to %d if safe to do so.",
revision, img_hdr->min_chip_rev, revision);
}
return err;
}

7
components/bootloader_support/src/bootloader_init.c
View File

@ -17,6 +17,7 @@
#include <sys/param.h>
#include "esp_attr.h"
#include "esp_efuse.h"
#include "esp_log.h"
#include "rom/cache.h"
@ -126,6 +127,12 @@ static esp_err_t bootloader_main()
ESP_LOGE(TAG, "failed to load bootloader header!");
return ESP_FAIL;
}
/* Check chip ID and minimum chip revision that supported by this image */
uint8_t revision = esp_efuse_get_chip_ver();
ESP_LOGI(TAG, "Chip Revision: %d", revision);
if (bootloader_common_check_chip_validity(&fhdr) != ESP_OK) {
return ESP_FAIL;
}
bootloader_init_flash_configure(&fhdr);
#if (CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ == 240)
//Check if ESP32 is rated for a CPU frequency of 160MHz only

30
components/bootloader_support/src/efuse.c
View File

@ -15,6 +15,7 @@
#include "esp_log.h"
#include <string.h>
#include "bootloader_random.h"
#include "soc/apb_ctrl_reg.h"
#define EFUSE_CONF_WRITE 0x5A5A /* efuse_pgm_op_ena, force no rd/wr disable */
#define EFUSE_CONF_READ 0x5AA5 /* efuse_read_op_ena, release force */
@ -112,3 +113,32 @@ void esp_efuse_write_random_key(uint32_t blk_wdata0_reg)
bzero(buf, sizeof(buf));
bzero(raw, sizeof(raw));
}
// Returns chip version from efuse
uint8_t esp_efuse_get_chip_ver(void)
{
uint8_t eco_bit0, eco_bit1, eco_bit2;
eco_bit0 = (REG_READ(EFUSE_BLK0_RDATA3_REG) & 0xF000) >> 15;
eco_bit1 = (REG_READ(EFUSE_BLK0_RDATA5_REG) & 0x100000) >> 20;
eco_bit2 = (REG_READ(APB_CTRL_DATE_REG) & 0x80000000) >> 31;
uint32_t combine_value = (eco_bit2 << 2) | (eco_bit1 << 1) | eco_bit0;
uint8_t chip_ver = 0;
switch (combine_value) {
case 0:
chip_ver = 0;
break;
case 1:
chip_ver = 1;
break;
case 3:
chip_ver = 2;
break;
case 7:
chip_ver = 3;
break;
default:
chip_ver = 0;
break;
}
return chip_ver;
}

4
components/bootloader_support/src/esp_image_format.c
View File

@ -24,6 +24,7 @@
#include <bootloader_random.h>
#include <bootloader_sha.h>
#include "bootloader_util.h"
#include "bootloader_common.h"
/* Checking signatures as part of verifying images is necessary:
- Always if secure boot is enabled
@ -253,6 +254,9 @@ static esp_err_t verify_image_header(uint32_t src_addr, const esp_image_header_t
}
err = ESP_ERR_IMAGE_INVALID;
}
if (bootloader_common_check_chip_validity(image) != ESP_OK) {
err = ESP_ERR_IMAGE_INVALID;
}
if (!silent) {
if (image->spi_mode > ESP_IMAGE_SPI_MODE_SLOW_READ) {
ESP_LOGW(TAG, "image at 0x%x has invalid SPI mode %d", src_addr, image->spi_mode);

145
components/esp32/Kconfig
View File

@ -1,5 +1,33 @@
menu "ESP32-specific"
choice ESP32_REV_MIN
prompt "Minimum Supported ESP32 Revision"
default ESP32_REV_MIN_0
help
Minimum revision that ESP-IDF would support.
ESP-IDF performs different strategy on different esp32 revision.
config ESP32_REV_MIN_0
bool "Rev 0"
config ESP32_REV_MIN_1
bool "Rev 1"
config ESP32_REV_MIN_2
bool "Rev 2"
config ESP32_REV_MIN_3
bool "Rev 3"
endchoice
config ESP32_REV_MIN
int
default 0 if ESP32_REV_MIN_0
default 1 if ESP32_REV_MIN_1
default 2 if ESP32_REV_MIN_2
default 3 if ESP32_REV_MIN_3
config ESP32_DPORT_WORKAROUND
bool
default "y" if !FREERTOS_UNICORE && ESP32_REV_MIN < 2
choice ESP32_DEFAULT_CPU_FREQ_MHZ
prompt "CPU frequency"
default ESP32_DEFAULT_CPU_FREQ_160
@ -24,7 +52,7 @@ config SPIRAM_SUPPORT
bool "Support for external, SPI-connected RAM"
default "n"
help
This enables support for an external SPI RAM chip, connected in parallel with the
This enables support for an external SPI RAM chip, connected in parallel with the
main SPI flash chip.
menu "SPI RAM config"
@ -117,11 +145,10 @@ config SPIRAM_CACHE_WORKAROUND
when the cache line needs to be fetched from external RAM and an interrupt occurs. This enables a
fix in the compiler (-mfix-esp32-psram-cache-issue) that makes sure the specific code that is vulnerable
to this will not be emitted.
This will also not use any bits of newlib that are located in ROM, opting for a version that is compiled
with the workaround and located in flash instead.
config SPIRAM_MALLOC_ALWAYSINTERNAL
int "Maximum malloc() size, in bytes, to always put in internal memory"
depends on SPIRAM_USE_MALLOC
@ -132,7 +159,7 @@ config SPIRAM_MALLOC_ALWAYSINTERNAL
than this size in internal memory, while allocations larger than this will be done from external RAM.
If allocation from the preferred region fails, an attempt is made to allocate from the non-preferred
region instead, so malloc() will not suddenly fail when either internal or external memory is full.
config WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
bool "Try to allocate memories of WiFi and LWIP in SPIRAM firstly. If failed, allocate internal memory"
depends on SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC
@ -148,12 +175,12 @@ config SPIRAM_MALLOC_RESERVE_INTERNAL
help
Because the external/internal RAM allocation strategy is not always perfect, it sometimes may happen
that the internal memory is entirely filled up. This causes allocations that are specifically done in
internal memory, for example the stack for new tasks or memory to service DMA or have memory that's
also available when SPI cache is down, to fail. This option reserves a pool specifically for requests
internal memory, for example the stack for new tasks or memory to service DMA or have memory that's
also available when SPI cache is down, to fail. This option reserves a pool specifically for requests
like that; the memory in this pool is not given out when a normal malloc() is called.
Set this to 0 to disable this feature.
Note that because FreeRTOS stacks are forced to internal memory, they will also use this memory pool;
be sure to keep this in mind when adjusting this value.
@ -213,8 +240,8 @@ choice ESP32_COREDUMP_TO_FLASH_OR_UART
help
Select place to store core dump: flash, uart or none (to disable core dumps generation).
If core dump is configured to be stored in flash and custom partition table is used add
corresponding entry to your CSV. For examples, please see predefined partition table CSV descriptions
If core dump is configured to be stored in flash and custom partition table is used add
corresponding entry to your CSV. For examples, please see predefined partition table CSV descriptions
in the components/partition_table directory.
config ESP32_ENABLE_COREDUMP_TO_FLASH
@ -253,18 +280,18 @@ choice NUMBER_OF_UNIVERSAL_MAC_ADDRESS
default FOUR_UNIVERSAL_MAC_ADDRESS
help
Configure the number of universally administered (by IEEE) MAC addresses.
During initialisation, MAC addresses for each network interface are generated or derived from a
During initialisation, MAC addresses for each network interface are generated or derived from a
single base MAC address.
If the number of universal MAC addresses is four, all four interfaces (WiFi station, WiFi softap,
Bluetooth and Ethernet) receive a universally administered MAC address. These are generated
If the number of universal MAC addresses is four, all four interfaces (WiFi station, WiFi softap,
Bluetooth and Ethernet) receive a universally administered MAC address. These are generated
sequentially by adding 0, 1, 2 and 3 (respectively) to the final octet of the base MAC address.
If the number of universal MAC addresses is two, only two interfaces (WiFi station and Bluetooth)
receive a universally administered MAC address. These are generated sequentially by adding 0
and 1 (respectively) to the base MAC address. The remaining two interfaces (WiFi softap and Ethernet)
receive local MAC addresses. These are derived from the universal WiFi station and Bluetooth MAC
If the number of universal MAC addresses is two, only two interfaces (WiFi station and Bluetooth)
receive a universally administered MAC address. These are generated sequentially by adding 0
and 1 (respectively) to the base MAC address. The remaining two interfaces (WiFi softap and Ethernet)
receive local MAC addresses. These are derived from the universal WiFi station and Bluetooth MAC
addresses, respectively.
When using the default (Espressif-assigned) base MAC address, either setting can be used. When using
a custom universal MAC address range, the correct setting will depend on the allocation of MAC
When using the default (Espressif-assigned) base MAC address, either setting can be used. When using
a custom universal MAC address range, the correct setting will depend on the allocation of MAC
addresses in this range (either 2 or 4 per device.)
config TWO_UNIVERSAL_MAC_ADDRESS
@ -274,7 +301,7 @@ config FOUR_UNIVERSAL_MAC_ADDRESS
endchoice
config NUMBER_OF_UNIVERSAL_MAC_ADDRESS
int
int
default 2 if TWO_UNIVERSAL_MAC_ADDRESS
default 4 if FOUR_UNIVERSAL_MAC_ADDRESS
@ -322,10 +349,10 @@ config TIMER_TASK_STACK_SIZE
to dispatch callbacks of timers created using ets_timer and esp_timer
APIs. If you are seing stack overflow errors in timer task, increase
this value.
Note that this is not the same as FreeRTOS timer task. To configure
FreeRTOS timer task size, see "FreeRTOS timer task stack size" option
in "FreeRTOS" menu.
in "FreeRTOS" menu.
choice NEWLIB_STDOUT_LINE_ENDING
prompt "Line ending for UART output"
@ -334,15 +361,15 @@ choice NEWLIB_STDOUT_LINE_ENDING
This option allows configuring the desired line endings sent to UART
when a newline ('\n', LF) appears on stdout.
Three options are possible:
CRLF: whenever LF is encountered, prepend it with CR
LF: no modification is applied, stdout is sent as is
CR: each occurence of LF is replaced with CR
This option doesn't affect behavior of the UART driver (drivers/uart.h).
config NEWLIB_STDOUT_LINE_ENDING_CRLF
bool "CRLF"
config NEWLIB_STDOUT_LINE_ENDING_LF
@ -358,15 +385,15 @@ choice NEWLIB_STDIN_LINE_ENDING
This option allows configuring which input sequence on UART produces
a newline ('\n', LF) on stdin.
Three options are possible:
CRLF: CRLF is converted to LF
LF: no modification is applied, input is sent to stdin as is
CR: each occurence of CR is replaced with LF
This option doesn't affect behavior of the UART driver (drivers/uart.h).
config NEWLIB_STDIN_LINE_ENDING_CRLF
bool "CRLF"
config NEWLIB_STDIN_LINE_ENDING_LF
@ -401,7 +428,7 @@ choice CONSOLE_UART
default CONSOLE_UART_DEFAULT
help
Select whether to use UART for console output (through stdout and stderr).
- Default is to use UART0 on pins GPIO1(TX) and GPIO3(RX).
- If "Custom" is selected, UART0 or UART1 can be chosen,
and any pins can be selected.
@ -515,10 +542,10 @@ config ESP32_DEBUG_OCDAWARE
config ESP32_DEBUG_STUBS_ENABLE
bool "OpenOCD debug stubs"
default OPTIMIZATION_LEVEL_DEBUG
default OPTIMIZATION_LEVEL_DEBUG
depends on !ESP32_TRAX
help
Debug stubs are used by OpenOCD to execute pre-compiled onboard code which does some useful debugging,
Debug stubs are used by OpenOCD to execute pre-compiled onboard code which does some useful debugging,
e.g. GCOV data dump.
config INT_WDT
@ -552,7 +579,7 @@ config TASK_WDT
help
The Task Watchdog Timer can be used to make sure individual tasks are still
running. Enabling this option will cause the Task Watchdog Timer to be
initialized automatically at startup. The Task Watchdog timer can be
initialized automatically at startup. The Task Watchdog timer can be
initialized after startup as well (see Task Watchdog Timer API Reference)
config TASK_WDT_PANIC
@ -658,7 +685,7 @@ choice ESP32_TIME_SYSCALL
continue in deep sleep. Time will be reported at 1 microsecond
resolution. This is the default, and the recommended option.
- If only high-resolution timer is used, gettimeofday will
provide time at microsecond resolution.
provide time at microsecond resolution.
Time will not be preserved when going into deep sleep mode.
- If only RTC timer is used, timekeeping will continue in
deep sleep, but time will be measured at 6.(6) microsecond
@ -717,7 +744,7 @@ config ESP32_RTC_CLK_CAL_CYCLES
by the calibration routine. Higher numbers increase calibration
precision, which may be important for applications which spend a lot of
time in deep sleep. Lower numbers reduce startup time.
When this option is set to 0, clock calibration will not be performed at
startup, and approximate clock frequencies will be assumed:
@ -732,15 +759,15 @@ config ESP32_RTC_XTAL_BOOTSTRAP_CYCLES
default 5
range 0 32768
help
To reduce the startup time of an external RTC crystal,
we bootstrap it with a 32kHz square wave for a fixed number of cycles.
Setting 0 will disable bootstrapping (if disabled, the crystal may take
To reduce the startup time of an external RTC crystal,
we bootstrap it with a 32kHz square wave for a fixed number of cycles.
Setting 0 will disable bootstrapping (if disabled, the crystal may take
longer to start up or fail to oscillate under some conditions).
If this value is too high, a faulty crystal may initially start and then fail.
If this value is too high, a faulty crystal may initially start and then fail.
If this value is too low, an otherwise good crystal may not start.
To accurately determine if the crystal has started,
To accurately determine if the crystal has started,
set a larger "Number of cycles for RTC_SLOW_CLK calibration" (about 3000).
config ESP32_DEEP_SLEEP_WAKEUP_DELAY
@ -754,9 +781,9 @@ config ESP32_DEEP_SLEEP_WAKEUP_DELAY
time to pass between power on and first read operation. By default,
without any extra delay, this time is approximately 900us, although
some flash chip types need more than that.
By default extra delay is set to 2000us. When optimizing startup time
for applications which require it, this value may be reduced.
for applications which require it, this value may be reduced.
If you are seeing "flash read err, 1000" message printed to the
console after deep sleep reset, try increasing this value.
@ -902,8 +929,8 @@ config ESP32_WIFI_STATIC_RX_BUFFER_NUM
until esp_wifi_deinit is called.
WiFi hardware use these buffers to receive all 802.11 frames.
A higher number may allow higher throughput but increases memory use. If ESP32_WIFI_AMPDU_RX_ENABLED
is enabled, this value is recommended to set equal or bigger than ESP32_WIFI_RX_BA_WIN in order to
A higher number may allow higher throughput but increases memory use. If ESP32_WIFI_AMPDU_RX_ENABLED
is enabled, this value is recommended to set equal or bigger than ESP32_WIFI_RX_BA_WIN in order to
achieve better throughput and compatibility with both stations and APs.
config ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
@ -987,8 +1014,8 @@ config ESP32_WIFI_CSI_ENABLED
bool "WiFi CSI(Channel State Information)"
default n
help
Select this option to enable CSI(Channel State Information) feature. CSI takes about
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable
Select this option to enable CSI(Channel State Information) feature. CSI takes about
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable
this feature in order to save memory.
config ESP32_WIFI_AMPDU_TX_ENABLED
@ -1005,7 +1032,7 @@ config ESP32_WIFI_TX_BA_WIN
default 6
help
Set the size of WiFi Block Ack TX window. Generally a bigger value means higher throughput but
more memory. Most of time we should NOT change the default value unless special reason, e.g.
more memory. Most of time we should NOT change the default value unless special reason, e.g.
test the maximum UDP TX throughput with iperf etc. For iperf test in shieldbox, the recommended
value is 9~12.
@ -1023,10 +1050,10 @@ config ESP32_WIFI_RX_BA_WIN
default 6 if !WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
default 16 if WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
help
Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better
Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better
compatibility but more memory. Most of time we should NOT change the default value unless special reason, e.g.
test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the recommended
value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first, the default
value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first, the default
and minimum value should be 16 to achieve better throughput and compatibility with both stations and APs.
config ESP32_WIFI_NVS_ENABLED
@ -1091,7 +1118,7 @@ config ESP32_PHY_CALIBRATION_AND_DATA_STORAGE
help
If this option is enabled, NVS will be initialized and calibration data will be loaded from there.
PHY calibration will be skipped on deep sleep wakeup. If calibration data is not found, full calibration
will be performed and stored in NVS. Normally, only partial calibration will be performed.
will be performed and stored in NVS. Normally, only partial calibration will be performed.
If this option is disabled, full calibration will be performed.
If it's easy that your board calibrate bad data, choose 'n'.
@ -1115,7 +1142,7 @@ config ESP32_PHY_INIT_DATA_IN_PARTITION
into the application binary.
If unsure, choose 'n'.
config ESP32_PHY_MAX_WIFI_TX_POWER
int "Max WiFi TX power (dBm)"
range 0 20
@ -1148,7 +1175,7 @@ config PM_ENABLE
This option has run-time overhead (increased interrupt latency,
longer time to enter idle state), and it also reduces accuracy of
RTOS ticks and timers used for timekeeping.
Enable this option if application uses power management APIs.
Enable this option if application uses power management APIs.
config PM_DFS_INIT_AUTO
bool "Enable dynamic frequency scaling (DFS) at startup"
@ -1185,7 +1212,7 @@ config PM_PROFILING
This feature can be used to analyze which locks are preventing the chip
from going into a lower power state, and see what time the chip spends
in each power saving mode. This feature does incur some run-time
overhead, so should typically be disabled in production builds.
overhead, so should typically be disabled in production builds.
config PM_TRACE
bool "Enable debug tracing of PM using GPIOs"
@ -1198,6 +1225,6 @@ config PM_TRACE
This feature is intended to be used when analyzing/debugging behavior
of power management implementation, and should be kept disabled in
applications.
endmenu # "Power Management"

8
components/esp32/dport_access.c
View File

@ -16,7 +16,7 @@
* DPORT access is used for do protection when dual core access DPORT internal register and APB register via DPORT simultaneously
* This function will be initialize after FreeRTOS startup.
* When cpu0 want to access DPORT register, it should notify cpu1 enter in high-priority interrupt for be mute. When cpu1 already in high-priority interrupt,
* cpu0 can access DPORT register. Currently, cpu1 will wait for cpu0 finish access and exit high-priority interrupt.
* cpu0 can access DPORT register. Currently, cpu1 will wait for cpu0 finish access and exit high-priority interrupt.
*/
#include <stdint.h>
@ -116,7 +116,7 @@ void IRAM_ATTR esp_dport_access_stall_other_cpu_end(void)
{
#ifndef CONFIG_FREERTOS_UNICORE
int cpu_id = xPortGetCoreID();
if (dport_core_state[0] == DPORT_CORE_STATE_IDLE
|| dport_core_state[1] == DPORT_CORE_STATE_IDLE) {
return;
@ -249,7 +249,7 @@ void IRAM_ATTR esp_dport_access_read_buffer(uint32_t *buff_out, uint32_t address
*/
uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
uint32_t apb;
@ -295,7 +295,7 @@ uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
*/
uint32_t IRAM_ATTR esp_dport_access_sequence_reg_read(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
uint32_t apb;

2
components/esp32/include/esp_dport_access.h
View File

@ -33,7 +33,7 @@ uint32_t esp_dport_access_sequence_reg_read(uint32_t reg);
//only call in case of panic().
void esp_dport_access_int_abort(void);
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
#define DPORT_STALL_OTHER_CPU_START()
#define DPORT_STALL_OTHER_CPU_END()
#define DPORT_INTERRUPT_DISABLE()

31
components/esp32/system_api.c
View File

@ -16,6 +16,7 @@
#include "esp_system.h"
#include "esp_attr.h"
#include "esp_efuse.h"
#include "esp_wifi.h"
#include "esp_wifi_internal.h"
#include "esp_log.h"
@ -227,7 +228,7 @@ esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type)
ESP_LOGW(TAG, "incorrect mac type");
break;
}
return ESP_OK;
}
@ -318,10 +319,10 @@ void IRAM_ATTR esp_restart_noos()
WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
// Reset wifi/bluetooth/ethernet/sdio (bb/mac)
DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG,
DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG,
DPORT_BB_RST | DPORT_FE_RST | DPORT_MAC_RST |
DPORT_BT_RST | DPORT_BTMAC_RST | DPORT_SDIO_RST |
DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST |
DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST |
DPORT_RW_BTMAC_RST | DPORT_RW_BTLP_RST);
DPORT_REG_WRITE(DPORT_CORE_RST_EN_REG, 0);
@ -377,35 +378,27 @@ const char* esp_get_idf_version(void)
return IDF_VER;
}
static void get_chip_info_esp32(esp_chip_info_t* out_info)
void esp_chip_info(esp_chip_info_t* out_info)
{
uint32_t reg = REG_READ(EFUSE_BLK0_RDATA3_REG);
uint32_t efuse_rd3 = REG_READ(EFUSE_BLK0_RDATA3_REG);
memset(out_info, 0, sizeof(*out_info));
out_info->model = CHIP_ESP32;
if ((reg & EFUSE_RD_CHIP_VER_REV1_M) != 0) {
out_info->revision = 1;
}
if ((reg & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
out_info->revision = esp_efuse_get_chip_ver();
if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
out_info->cores = 2;
} else {
out_info->cores = 1;
}
out_info->features = CHIP_FEATURE_WIFI_BGN;
if ((reg & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
out_info->features |= CHIP_FEATURE_BT | CHIP_FEATURE_BLE;
}
int package = (reg & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
int package = (efuse_rd3 & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
if (package == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
out_info->features |= CHIP_FEATURE_EMB_FLASH;
}
}
void esp_chip_info(esp_chip_info_t* out_info)
{
// Only ESP32 is supported now, in the future call one of the
// chip-specific functions based on sdkconfig choice
return get_chip_info_esp32(out_info);
}

4
components/esptool_py/Makefile.projbuild
View File

@ -31,6 +31,10 @@ endif
ESPTOOL_ELF2IMAGE_OPTIONS :=
ifdef CONFIG_ESP32_REV_MIN
ESPTOOL_ELF2IMAGE_OPTIONS += --min-rev $(CONFIG_ESP32_REV_MIN)
endif
ifdef CONFIG_SECURE_BOOT_ENABLED
ifndef CONFIG_SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
ifndef IS_BOOTLOADER_BUILD

2
components/esptool_py/esptool

@ -1 +1 @@
Subproject commit 9ad444a6e06e58833d5e6044c1d5f3eb3dd56023
Subproject commit 4f1e825d2d1ee33b896b3977905fb29ac6cc0794

4
components/esptool_py/project_include.cmake
View File

@ -16,6 +16,10 @@ set(ESPTOOLPY_ELF2IMAGE_FLASH_OPTIONS
--flash_size ${ESPFLASHSIZE}
)
if(CONFIG_ESP32_REV_MIN)
set(ESPTOOLPY_ELF2IMAGE_OPTIONS ${ESPTOOLPY_ELF2IMAGE_OPTIONS} --min-rev ${CONFIG_ESP32_REV_MIN})
endif()
if(CONFIG_ESPTOOLPY_FLASHSIZE_DETECT)
# Set ESPFLASHSIZE to 'detect' *after* elf2image options are generated,
# as elf2image can't have 'detect' as an option...

8
components/soc/esp32/include/soc/dport_access.h
View File

@ -48,7 +48,7 @@ extern "C" {
// After completing read operations, use DPORT_STALL_OTHER_CPU_END().
// This method uses stall other CPU while reading DPORT registers.
// Useful for compatibility, as well as for large consecutive readings.
// This method is slower, but must be used if ROM functions or
// This method is slower, but must be used if ROM functions or
// other code is called which accesses DPORT without any other workaround.
// *) The pre-readable APB register before reading the DPORT register
// helps synchronize the operation of the two CPUs,
@ -73,7 +73,7 @@ extern "C" {
*/
static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_reg_read(reg);
@ -106,7 +106,7 @@ static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
*/
static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_sequence_reg_read(reg);
@ -166,7 +166,7 @@ static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
*/
static inline uint32_t IRAM_ATTR DPORT_READ_PERI_REG(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_reg_read(reg);

2
components/soc/esp32/include/soc/soc.h
View File

@ -150,7 +150,7 @@
#define IS_DPORT_REG(_r) (((_r) >= DR_REG_DPORT_BASE) && (_r) <= DR_REG_DPORT_END)
#if !defined( BOOTLOADER_BUILD ) && !defined( CONFIG_FREERTOS_UNICORE ) && defined( ESP_PLATFORM )
#if !defined( BOOTLOADER_BUILD ) && defined( CONFIG_ESP32_DPORT_WORKAROUND ) && defined( ESP_PLATFORM )
#define ASSERT_IF_DPORT_REG(_r, OP) TRY_STATIC_ASSERT(!IS_DPORT_REG(_r), (Cannot use OP for DPORT registers use DPORT_##OP));
#else
#define ASSERT_IF_DPORT_REG(_r, OP)