diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index e0cea70fa7..dd4049358a 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -62,7 +62,7 @@ build_ssc: expire_in: 6 mos script: - - git clone ssh://git@gitlab.espressif.cn:27227/yinling/SSC.git + - git clone $GITLAB_SSH_SERVER/yinling/SSC.git - cd SSC - git checkout ${CI_BUILD_REF_NAME} || echo "Using SSC default branch..." - make defconfig @@ -105,47 +105,33 @@ test_build_system: script: - ./make/test_build_system.sh - - -# template for test jobs -.test_template: &test_template - stage: test - when: on_success +test_report: + stage: deploy only: - master - triggers - + tags: + - test_report + allow_failure: true variables: - # need user to set SDK_NAME and CONFIG_FILE (may need to set BIN_PATH and APP_NAME later) in before_script - SCRIPT_PATH: /home/gitlab-runner/auto_test_script - BIN_PATH: ${CI_PROJECT_DIR}/SSC/build/ - APP_NAME: ssc - LOG_PATH: $CI_PROJECT_DIR/$CI_BUILD_REF - + LOG_PATH: "$CI_PROJECT_DIR/$CI_BUILD_REF" + TEST_CASE_FILE_PATH: "$CI_PROJECT_DIR/components/idf_test" + REPORT_PATH: "$CI_PROJECT_DIR/CI_Test_Report" artifacts: when: always paths: - - $LOG_PATH + - $REPORT_PATH expire_in: 6 mos - script: - - cd $SCRIPT_PATH - - python CIRunner.py -l $LOG_PATH -c $SDK_NAME/$CONFIG_FILE bin_path $APP_NAME $BIN_PATH - -sanity_test: - <<: *test_template - tags: - - ESP32 - - SSC_T1_1 - - SSC_T2_1 - - SSC_T1_WAN - before_script: - - SDK_NAME=ESP32_IDF - - CONFIG_FILE=sanity_test.yml + # clone test bench + - git clone $GITLAB_SSH_SERVER/yinling/auto_test_script.git + - cd auto_test_script + # generate report + - python CITestReport.py -l $LOG_PATH -t $TEST_CASE_FILE_PATH -p $REPORT_PATH push_master_to_github: - before_script: + before_script: - echo "Not setting up GitLab key, not fetching submodules" stage: deploy only: @@ -165,3 +151,250 @@ push_master_to_github: - echo -e "Host github.com\n\tStrictHostKeyChecking no\n" >> ~/.ssh/config - git remote add github git@github.com:espressif/esp-idf.git - git push --follow-tags github HEAD:master + + +# AUTO GENERATED PART START, DO NOT MODIFY CONTENT BELOW +# template for test jobs +.test_template: &test_template + stage: test + when: on_success + only: + - master + - triggers + allow_failure: true + + variables: + # LOCAL_ENV_CONFIG_PATH: define in template and jobs can overwrite if required + LOCAL_ENV_CONFIG_PATH: /home/gitlab-runner/LocalConfig/ESP32_IDF + BIN_PATH: "$CI_PROJECT_DIR/SSC/build/" + APP_NAME: "ssc" + LOG_PATH: "$CI_PROJECT_DIR/$CI_BUILD_REF" + # append test level folder to TEST_CASE_FILE_PATH in before_script of test job + TEST_CASE_FILE_PATH: "$CI_PROJECT_DIR/components/idf_test" + # jobs MUST set CONFIG_FILE in before_script, and overwrite the variables above if necessary + + artifacts: + when: always + paths: + - $LOG_PATH + expire_in: 6 mos + + script: + # add gitlab ssh key + - mkdir -p ~/.ssh + - chmod 700 ~/.ssh + - echo -n $GITLAB_KEY > ~/.ssh/id_rsa_base64 + - base64 --decode --ignore-garbage ~/.ssh/id_rsa_base64 > ~/.ssh/id_rsa + - chmod 600 ~/.ssh/id_rsa + - echo -e "Host gitlab.espressif.cn\n\tStrictHostKeyChecking no\n" >> ~/.ssh/config + # clone test bench + - git clone $GITLAB_SSH_SERVER/yinling/auto_test_script.git + - cd auto_test_script + # run test + - python CIRunner.py -l $LOG_PATH -c $CONFIG_FILE -e $LOCAL_ENV_CONFIG_PATH -t $TEST_CASE_FILE_PATH bin_path $APP_NAME $BIN_PATH + + +# template for overnight test jobs +.test_template_night: &test_template_night + <<: *test_template + only: + # can only be triggered + - triggers + script: + # must be night build triggers, otherwise exit without test + - test $NIGHT_BUILD = "Yes" || exit 0 + # add gitlab ssh key + - mkdir -p ~/.ssh + - chmod 700 ~/.ssh + - echo -n $GITLAB_KEY > ~/.ssh/id_rsa_base64 + - base64 --decode --ignore-garbage ~/.ssh/id_rsa_base64 > ~/.ssh/id_rsa + - chmod 600 ~/.ssh/id_rsa + - echo -e "Host gitlab.espressif.cn\n\tStrictHostKeyChecking no\n" >> ~/.ssh/config + # clone test bench + - git clone $GITLAB_SSH_SERVER/yinling/auto_test_script.git + - cd auto_test_script + # run test + - python CIRunner.py -l $LOG_PATH -c $CONFIG_FILE -e $LOCAL_ENV_CONFIG_PATH -t $TEST_CASE_FILE_PATH bin_path $APP_NAME $BIN_PATH + +IT_Function_SYS_01: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_SYS_01.yml + +IT_Function_WIFI_01: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_01.yml + +IT_Function_WIFI_02: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_02.yml + +IT_Function_TCPIP_01: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_01.yml + +IT_Function_TCPIP_02: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_02.yml + +IT_Function_TCPIP_03: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_03.yml + +IT_Function_TCPIP_04: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_04.yml + +IT_Function_TCPIP_05: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_05.yml + +IT_Function_TCPIP_06: + <<: *test_template_night + tags: + - ESP32_IDF + - SSC_T1_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_06.yml + +IT_Function_WIFI_03: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T3_PhyMode + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_03.yml + +IT_Function_WIFI_04: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_APC + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_04.yml + +IT_Function_WIFI_05: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_WEP + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_05.yml + +IT_Function_WIFI_06: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T2_PhyMode + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_WIFI_06.yml + +IT_Function_TCPIP_07: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T1_2 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_07.yml + +IT_Function_TCPIP_08: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_08.yml + +IT_Function_TCPIP_09: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_09.yml + +IT_Function_TCPIP_10: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T1_2 + - SSC_T2_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_10.yml + +IT_Function_TCPIP_11: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_11.yml + +IT_Function_TCPIP_12: + <<: *test_template + tags: + - ESP32_IDF + - SSC_T1_1 + - SSC_T1_2 + before_script: + - TEST_CASE_FILE_PATH=$TEST_CASE_FILE_PATH/integration_test + - CONFIG_FILE=$TEST_CASE_FILE_PATH/CIConfigs/IT_Function_TCPIP_12.yml diff --git a/components/bootloader/src/main/bootloader_start.c b/components/bootloader/src/main/bootloader_start.c index e0ab7f9e2a..a61ea77d59 100644 --- a/components/bootloader/src/main/bootloader_start.c +++ b/components/bootloader/src/main/bootloader_start.c @@ -411,15 +411,15 @@ void unpack_load_app(const partition_pos_t* partition) map = true; } - if(!load_rtc_memory && address >= RTC_IRAM_LOW && address < RTC_IRAM_HIGH) { - ESP_LOGD(TAG, "Skipping RTC code section at %08x\n", pos); - load = false; - } + if (!load_rtc_memory && address >= RTC_IRAM_LOW && address < RTC_IRAM_HIGH) { + ESP_LOGD(TAG, "Skipping RTC code section at %08x\n", pos); + load = false; + } - if(!load_rtc_memory && address >= RTC_DATA_LOW && address < RTC_DATA_HIGH) { - ESP_LOGD(TAG, "Skipping RTC data section at %08x\n", pos); - load = false; - } + if (!load_rtc_memory && address >= RTC_DATA_LOW && address < RTC_DATA_HIGH) { + ESP_LOGD(TAG, "Skipping RTC data section at %08x\n", pos); + load = false; + } ESP_LOGI(TAG, "section %d: paddr=0x%08x vaddr=0x%08x size=0x%05x (%6d) %s", section_index, pos, section_header.load_addr, section_header.data_len, section_header.data_len, (load)?"load":(map)?"map":""); diff --git a/components/bt/component.mk b/components/bt/component.mk index c458570503..b5a5489ed2 100644 --- a/components/bt/component.mk +++ b/components/bt/component.mk @@ -77,4 +77,4 @@ ALL_LIB_FILES := $(patsubst %,$(COMPONENT_PATH)/lib/lib%.a,$(LIBS)) $(COMPONENT_LIBRARY): $(ALL_LIB_FILES) # automatically trigger a git submodule update if BT library is missing -$(eval $(call SubmoduleRequiredForFiles,$(ALL_LIB_FILES))) +$(eval $(call SubmoduleCheck,$(ALL_LIB_FILES),$(COMPONENT_PATH)/lib)) diff --git a/components/driver/gpio.c b/components/driver/gpio.c index 320533e8d4..14dfc00b43 100644 --- a/components/driver/gpio.c +++ b/components/driver/gpio.c @@ -1,368 +1,368 @@ -// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at - -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. -#include -#include "esp_err.h" -#include "esp_intr.h" -#include "freertos/FreeRTOS.h" -#include "freertos/xtensa_api.h" -#include "driver/gpio.h" -#include "soc/soc.h" - -//TODO: move debug options to menuconfig -#define GPIO_DBG_ENABLE (0) -#define GPIO_WARNING_ENABLE (0) -#define GPIO_ERROR_ENABLE (0) -#define GPIO_INFO_ENABLE (0) -//DBG INFOR -#if GPIO_INFO_ENABLE -#define GPIO_INFO ets_printf -#else -#define GPIO_INFO(...) -#endif -#if GPIO_WARNING_ENABLE -#define GPIO_WARNING(format,...) do{\ - ets_printf("[waring][%s#%u]",__FUNCTION__,__LINE__);\ - ets_printf(format,##__VA_ARGS__);\ -}while(0) -#else -#define GPIO_WARNING(...) -#endif -#if GPIO_ERROR_ENABLE -#define GPIO_ERROR(format,...) do{\ - ets_printf("[error][%s#%u]",__FUNCTION__,__LINE__);\ - ets_printf(format,##__VA_ARGS__);\ -}while(0) -#else -#define GPIO_ERROR(...) -#endif - -const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT] = { - GPIO_PIN_REG_0, - GPIO_PIN_REG_1, - GPIO_PIN_REG_2, - GPIO_PIN_REG_3, - GPIO_PIN_REG_4, - GPIO_PIN_REG_5, - GPIO_PIN_REG_6, - GPIO_PIN_REG_7, - GPIO_PIN_REG_8, - GPIO_PIN_REG_9, - GPIO_PIN_REG_10, - GPIO_PIN_REG_11, - GPIO_PIN_REG_12, - GPIO_PIN_REG_13, - GPIO_PIN_REG_14, - GPIO_PIN_REG_15, - GPIO_PIN_REG_16, - GPIO_PIN_REG_17, - GPIO_PIN_REG_18, - GPIO_PIN_REG_19, - 0, - GPIO_PIN_REG_21, - GPIO_PIN_REG_22, - GPIO_PIN_REG_23, - 0, - GPIO_PIN_REG_25, - GPIO_PIN_REG_26, - GPIO_PIN_REG_27, - 0, - 0, - 0, - 0, - GPIO_PIN_REG_32, - GPIO_PIN_REG_33, - GPIO_PIN_REG_34, - GPIO_PIN_REG_35, - GPIO_PIN_REG_36, - GPIO_PIN_REG_37, - GPIO_PIN_REG_38, - GPIO_PIN_REG_39 -}; - -static int is_valid_gpio(int gpio_num) -{ - if(gpio_num >= GPIO_PIN_COUNT || GPIO_PIN_MUX_REG[gpio_num] == 0) { - GPIO_ERROR("GPIO io_num=%d does not exist\n",gpio_num); - return 0; - } - return 1; -} - -esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(intr_type >= GPIO_INTR_MAX) { - GPIO_ERROR("Unknown GPIO intr:%u\n",intr_type); - return ESP_ERR_INVALID_ARG; - } - GPIO.pin[gpio_num].int_type = intr_type; - return ESP_OK; -} - -esp_err_t gpio_intr_enable(gpio_num_t gpio_num) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(xPortGetCoreID() == 0) { - GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr - } else { - GPIO.pin[gpio_num].int_ena = GPIO_APP_CPU_INTR_ENA; //enable pro cpu intr - } - return ESP_OK; -} - -esp_err_t gpio_intr_disable(gpio_num_t gpio_num) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - GPIO.pin[gpio_num].int_ena = 0; //disable GPIO intr - return ESP_OK; -} - -static esp_err_t gpio_output_disable(gpio_num_t gpio_num) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(gpio_num < 32) { - GPIO.enable_w1tc = (0x1 << gpio_num); - } else { - GPIO.enable1_w1tc.data = (0x1 << (gpio_num - 32)); - } - return ESP_OK; -} - -static esp_err_t gpio_output_enable(gpio_num_t gpio_num) -{ - if(gpio_num >= 34) { - GPIO_ERROR("io_num=%d can only be input\n",gpio_num); - return ESP_ERR_INVALID_ARG; - } - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(gpio_num < 32) { - GPIO.enable_w1ts = (0x1 << gpio_num); - } else { - GPIO.enable1_w1ts.data = (0x1 << (gpio_num - 32)); - } - return ESP_OK; -} - -esp_err_t gpio_set_level(gpio_num_t gpio_num, uint32_t level) -{ - if(!GPIO_IS_VALID_GPIO(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(level) { - if(gpio_num < 32) { - GPIO.out_w1ts = (1 << gpio_num); - } else { - GPIO.out1_w1ts.data = (1 << (gpio_num - 32)); - } - } else { - if(gpio_num < 32) { - GPIO.out_w1tc = (1 << gpio_num); - } else { - GPIO.out1_w1tc.data = (1 << (gpio_num - 32)); - } - } - return ESP_OK; -} - -int gpio_get_level(gpio_num_t gpio_num) -{ - if(gpio_num < 32) { - return (GPIO.in >> gpio_num) & 0x1; - } else { - return (GPIO.in1.data >> (gpio_num - 32)) & 0x1; - } -} - -esp_err_t gpio_set_pull_mode(gpio_num_t gpio_num, gpio_pull_mode_t pull) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - esp_err_t ret = ESP_OK; - switch(pull) { - case GPIO_PULLUP_ONLY: - PIN_PULLUP_EN(GPIO_PIN_MUX_REG[gpio_num]); - PIN_PULLDWN_DIS(GPIO_PIN_MUX_REG[gpio_num]); - break; - case GPIO_PULLDOWN_ONLY: - PIN_PULLUP_DIS(GPIO_PIN_MUX_REG[gpio_num]); - PIN_PULLDWN_EN(GPIO_PIN_MUX_REG[gpio_num]); - break; - case GPIO_PULLUP_PULLDOWN: - PIN_PULLUP_EN(GPIO_PIN_MUX_REG[gpio_num]); - PIN_PULLDWN_EN(GPIO_PIN_MUX_REG[gpio_num]); - break; - case GPIO_FLOATING: - PIN_PULLUP_DIS(GPIO_PIN_MUX_REG[gpio_num]); - PIN_PULLDWN_DIS(GPIO_PIN_MUX_REG[gpio_num]); - break; - default: - GPIO_ERROR("Unknown pull up/down mode,gpio_num=%u,pull=%u\n",gpio_num,pull); - ret = ESP_ERR_INVALID_ARG; - break; - } - return ret; -} - -esp_err_t gpio_set_direction(gpio_num_t gpio_num, gpio_mode_t mode) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - if(gpio_num >= 34 && (mode & (GPIO_MODE_DEF_OUTPUT))) { - GPIO_ERROR("io_num=%d can only be input\n",gpio_num); - return ESP_ERR_INVALID_ARG; - } - esp_err_t ret = ESP_OK; - if(mode & GPIO_MODE_DEF_INPUT) { - PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]); - } else { - PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]); - } - if(mode & GPIO_MODE_DEF_OUTPUT) { - if(gpio_num < 32) { - GPIO.enable_w1ts = (0x1 << gpio_num); - } else { - GPIO.enable1_w1ts.data = (0x1 << (gpio_num - 32)); - } - } else { - if(gpio_num < 32) { - GPIO.enable_w1tc = (0x1 << gpio_num); - } else { - GPIO.enable1_w1tc.data = (0x1 << (gpio_num - 32)); - } - } - if(mode & GPIO_MODE_DEF_OD) { - GPIO.pin[gpio_num].pad_driver = 1; - } else { - GPIO.pin[gpio_num].pad_driver = 0; - } - return ret; -} - -esp_err_t gpio_config(gpio_config_t *pGPIOConfig) -{ - uint64_t gpio_pin_mask = (pGPIOConfig->pin_bit_mask); - uint32_t io_reg = 0; - uint32_t io_num = 0; - uint64_t bit_valid = 0; - if(pGPIOConfig->pin_bit_mask == 0 || pGPIOConfig->pin_bit_mask >= (((uint64_t) 1) << GPIO_PIN_COUNT)) { - GPIO_ERROR("GPIO_PIN mask error \n"); - return ESP_ERR_INVALID_ARG; - } - if((pGPIOConfig->mode) & (GPIO_MODE_DEF_OUTPUT)) { - //GPIO 34/35/36/37/38/39 can only be used as input mode; - if((gpio_pin_mask & ( GPIO_SEL_34 | GPIO_SEL_35 | GPIO_SEL_36 | GPIO_SEL_37 | GPIO_SEL_38 | GPIO_SEL_39))) { - GPIO_ERROR("GPIO34-39 can only be used as input mode\n"); - return ESP_ERR_INVALID_ARG; - } - } - do { - io_reg = GPIO_PIN_MUX_REG[io_num]; - if(((gpio_pin_mask >> io_num) & BIT(0)) && io_reg) { - GPIO_INFO("Gpio%02d |Mode:",io_num); - if((pGPIOConfig->mode) & GPIO_MODE_DEF_INPUT) { - GPIO_INFO("INPUT "); - PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[io_num]); - } else { - PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[io_num]); - } - if((pGPIOConfig->mode) & GPIO_MODE_DEF_OD) { - GPIO_INFO("OD "); - GPIO.pin[io_num].pad_driver = 1; /*0x01 Open-drain */ - } else { - GPIO.pin[io_num].pad_driver = 0; /*0x00 Normal gpio output */ - } - if((pGPIOConfig->mode) & GPIO_MODE_DEF_OUTPUT) { - GPIO_INFO("OUTPUT "); - gpio_output_enable(io_num); - } else { - gpio_output_disable(io_num); - } - GPIO_INFO("|"); - if(pGPIOConfig->pull_up_en) { - GPIO_INFO("PU "); - PIN_PULLUP_EN(io_reg); - } else { - PIN_PULLUP_DIS(io_reg); - } - if(pGPIOConfig->pull_down_en) { - GPIO_INFO("PD "); - PIN_PULLDWN_EN(io_reg); - } else { - PIN_PULLDWN_DIS(io_reg); - } - GPIO_INFO("Intr:%d |\n",pGPIOConfig->intr_type); - gpio_set_intr_type(io_num, pGPIOConfig->intr_type); - if(pGPIOConfig->intr_type) { - gpio_intr_enable(io_num); - } else { - gpio_intr_disable(io_num); - } - PIN_FUNC_SELECT(io_reg, PIN_FUNC_GPIO); /*function number 2 is GPIO_FUNC for each pin */ - } else if(bit_valid && (io_reg == 0)) { - GPIO_WARNING("io_num=%d does not exist\n",io_num); - } - io_num++; - } while(io_num < GPIO_PIN_COUNT); - return ESP_OK; -} - -esp_err_t gpio_isr_register(uint32_t gpio_intr_num, void (*fn)(void*), void * arg) -{ - if(fn == NULL) { - return ESP_ERR_INVALID_ARG; - } - ESP_INTR_DISABLE(gpio_intr_num); - intr_matrix_set(xPortGetCoreID(), ETS_GPIO_INTR_SOURCE, gpio_intr_num); - xt_set_interrupt_handler(gpio_intr_num, fn, arg); - ESP_INTR_ENABLE(gpio_intr_num); - return ESP_OK; -} - -/*only level interrupt can be used for wake-up function*/ -esp_err_t gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - esp_err_t ret = ESP_OK; - if((intr_type == GPIO_INTR_LOW_LEVEL) || (intr_type == GPIO_INTR_HIGH_LEVEL)) { - GPIO.pin[gpio_num].int_type = intr_type; - GPIO.pin[gpio_num].wakeup_enable = 0x1; - } else { - GPIO_ERROR("GPIO wakeup only support Level mode,but edge mode set. gpio_num:%u\n",gpio_num); - ret = ESP_ERR_INVALID_ARG; - } - return ret; -} - -esp_err_t gpio_wakeup_disable(gpio_num_t gpio_num) -{ - if(!is_valid_gpio(gpio_num)) { - return ESP_ERR_INVALID_ARG; - } - GPIO.pin[gpio_num].wakeup_enable = 0; - return ESP_OK; -} +// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at + +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +#include +#include "esp_err.h" +#include "esp_intr.h" +#include "freertos/FreeRTOS.h" +#include "freertos/xtensa_api.h" +#include "driver/gpio.h" +#include "soc/soc.h" + +//TODO: move debug options to menuconfig +#define GPIO_DBG_ENABLE (0) +#define GPIO_WARNING_ENABLE (0) +#define GPIO_ERROR_ENABLE (0) +#define GPIO_INFO_ENABLE (0) +//DBG INFOR +#if GPIO_INFO_ENABLE +#define GPIO_INFO ets_printf +#else +#define GPIO_INFO(...) +#endif +#if GPIO_WARNING_ENABLE +#define GPIO_WARNING(format,...) do{\ + ets_printf("[waring][%s#%u]",__FUNCTION__,__LINE__);\ + ets_printf(format,##__VA_ARGS__);\ +}while(0) +#else +#define GPIO_WARNING(...) +#endif +#if GPIO_ERROR_ENABLE +#define GPIO_ERROR(format,...) do{\ + ets_printf("[error][%s#%u]",__FUNCTION__,__LINE__);\ + ets_printf(format,##__VA_ARGS__);\ +}while(0) +#else +#define GPIO_ERROR(...) +#endif + +const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT] = { + GPIO_PIN_REG_0, + GPIO_PIN_REG_1, + GPIO_PIN_REG_2, + GPIO_PIN_REG_3, + GPIO_PIN_REG_4, + GPIO_PIN_REG_5, + GPIO_PIN_REG_6, + GPIO_PIN_REG_7, + GPIO_PIN_REG_8, + GPIO_PIN_REG_9, + GPIO_PIN_REG_10, + GPIO_PIN_REG_11, + GPIO_PIN_REG_12, + GPIO_PIN_REG_13, + GPIO_PIN_REG_14, + GPIO_PIN_REG_15, + GPIO_PIN_REG_16, + GPIO_PIN_REG_17, + GPIO_PIN_REG_18, + GPIO_PIN_REG_19, + 0, + GPIO_PIN_REG_21, + GPIO_PIN_REG_22, + GPIO_PIN_REG_23, + 0, + GPIO_PIN_REG_25, + GPIO_PIN_REG_26, + GPIO_PIN_REG_27, + 0, + 0, + 0, + 0, + GPIO_PIN_REG_32, + GPIO_PIN_REG_33, + GPIO_PIN_REG_34, + GPIO_PIN_REG_35, + GPIO_PIN_REG_36, + GPIO_PIN_REG_37, + GPIO_PIN_REG_38, + GPIO_PIN_REG_39 +}; + +static int is_valid_gpio(int gpio_num) +{ + if(gpio_num >= GPIO_PIN_COUNT || GPIO_PIN_MUX_REG[gpio_num] == 0) { + GPIO_ERROR("GPIO io_num=%d does not exist\n",gpio_num); + return 0; + } + return 1; +} + +esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(intr_type >= GPIO_INTR_MAX) { + GPIO_ERROR("Unknown GPIO intr:%u\n",intr_type); + return ESP_ERR_INVALID_ARG; + } + GPIO.pin[gpio_num].int_type = intr_type; + return ESP_OK; +} + +esp_err_t gpio_intr_enable(gpio_num_t gpio_num) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(xPortGetCoreID() == 0) { + GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr + } else { + GPIO.pin[gpio_num].int_ena = GPIO_APP_CPU_INTR_ENA; //enable pro cpu intr + } + return ESP_OK; +} + +esp_err_t gpio_intr_disable(gpio_num_t gpio_num) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + GPIO.pin[gpio_num].int_ena = 0; //disable GPIO intr + return ESP_OK; +} + +static esp_err_t gpio_output_disable(gpio_num_t gpio_num) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(gpio_num < 32) { + GPIO.enable_w1tc = (0x1 << gpio_num); + } else { + GPIO.enable1_w1tc.data = (0x1 << (gpio_num - 32)); + } + return ESP_OK; +} + +static esp_err_t gpio_output_enable(gpio_num_t gpio_num) +{ + if(gpio_num >= 34) { + GPIO_ERROR("io_num=%d can only be input\n",gpio_num); + return ESP_ERR_INVALID_ARG; + } + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(gpio_num < 32) { + GPIO.enable_w1ts = (0x1 << gpio_num); + } else { + GPIO.enable1_w1ts.data = (0x1 << (gpio_num - 32)); + } + return ESP_OK; +} + +esp_err_t gpio_set_level(gpio_num_t gpio_num, uint32_t level) +{ + if(!GPIO_IS_VALID_GPIO(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(level) { + if(gpio_num < 32) { + GPIO.out_w1ts = (1 << gpio_num); + } else { + GPIO.out1_w1ts.data = (1 << (gpio_num - 32)); + } + } else { + if(gpio_num < 32) { + GPIO.out_w1tc = (1 << gpio_num); + } else { + GPIO.out1_w1tc.data = (1 << (gpio_num - 32)); + } + } + return ESP_OK; +} + +int gpio_get_level(gpio_num_t gpio_num) +{ + if(gpio_num < 32) { + return (GPIO.in >> gpio_num) & 0x1; + } else { + return (GPIO.in1.data >> (gpio_num - 32)) & 0x1; + } +} + +esp_err_t gpio_set_pull_mode(gpio_num_t gpio_num, gpio_pull_mode_t pull) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + esp_err_t ret = ESP_OK; + switch(pull) { + case GPIO_PULLUP_ONLY: + PIN_PULLUP_EN(GPIO_PIN_MUX_REG[gpio_num]); + PIN_PULLDWN_DIS(GPIO_PIN_MUX_REG[gpio_num]); + break; + case GPIO_PULLDOWN_ONLY: + PIN_PULLUP_DIS(GPIO_PIN_MUX_REG[gpio_num]); + PIN_PULLDWN_EN(GPIO_PIN_MUX_REG[gpio_num]); + break; + case GPIO_PULLUP_PULLDOWN: + PIN_PULLUP_EN(GPIO_PIN_MUX_REG[gpio_num]); + PIN_PULLDWN_EN(GPIO_PIN_MUX_REG[gpio_num]); + break; + case GPIO_FLOATING: + PIN_PULLUP_DIS(GPIO_PIN_MUX_REG[gpio_num]); + PIN_PULLDWN_DIS(GPIO_PIN_MUX_REG[gpio_num]); + break; + default: + GPIO_ERROR("Unknown pull up/down mode,gpio_num=%u,pull=%u\n",gpio_num,pull); + ret = ESP_ERR_INVALID_ARG; + break; + } + return ret; +} + +esp_err_t gpio_set_direction(gpio_num_t gpio_num, gpio_mode_t mode) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + if(gpio_num >= 34 && (mode & (GPIO_MODE_DEF_OUTPUT))) { + GPIO_ERROR("io_num=%d can only be input\n",gpio_num); + return ESP_ERR_INVALID_ARG; + } + esp_err_t ret = ESP_OK; + if(mode & GPIO_MODE_DEF_INPUT) { + PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]); + } else { + PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]); + } + if(mode & GPIO_MODE_DEF_OUTPUT) { + if(gpio_num < 32) { + GPIO.enable_w1ts = (0x1 << gpio_num); + } else { + GPIO.enable1_w1ts.data = (0x1 << (gpio_num - 32)); + } + } else { + if(gpio_num < 32) { + GPIO.enable_w1tc = (0x1 << gpio_num); + } else { + GPIO.enable1_w1tc.data = (0x1 << (gpio_num - 32)); + } + } + if(mode & GPIO_MODE_DEF_OD) { + GPIO.pin[gpio_num].pad_driver = 1; + } else { + GPIO.pin[gpio_num].pad_driver = 0; + } + return ret; +} + +esp_err_t gpio_config(gpio_config_t *pGPIOConfig) +{ + uint64_t gpio_pin_mask = (pGPIOConfig->pin_bit_mask); + uint32_t io_reg = 0; + uint32_t io_num = 0; + uint64_t bit_valid = 0; + if(pGPIOConfig->pin_bit_mask == 0 || pGPIOConfig->pin_bit_mask >= (((uint64_t) 1) << GPIO_PIN_COUNT)) { + GPIO_ERROR("GPIO_PIN mask error \n"); + return ESP_ERR_INVALID_ARG; + } + if((pGPIOConfig->mode) & (GPIO_MODE_DEF_OUTPUT)) { + //GPIO 34/35/36/37/38/39 can only be used as input mode; + if((gpio_pin_mask & ( GPIO_SEL_34 | GPIO_SEL_35 | GPIO_SEL_36 | GPIO_SEL_37 | GPIO_SEL_38 | GPIO_SEL_39))) { + GPIO_ERROR("GPIO34-39 can only be used as input mode\n"); + return ESP_ERR_INVALID_ARG; + } + } + do { + io_reg = GPIO_PIN_MUX_REG[io_num]; + if(((gpio_pin_mask >> io_num) & BIT(0)) && io_reg) { + GPIO_INFO("Gpio%02d |Mode:",io_num); + if((pGPIOConfig->mode) & GPIO_MODE_DEF_INPUT) { + GPIO_INFO("INPUT "); + PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[io_num]); + } else { + PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[io_num]); + } + if((pGPIOConfig->mode) & GPIO_MODE_DEF_OD) { + GPIO_INFO("OD "); + GPIO.pin[io_num].pad_driver = 1; /*0x01 Open-drain */ + } else { + GPIO.pin[io_num].pad_driver = 0; /*0x00 Normal gpio output */ + } + if((pGPIOConfig->mode) & GPIO_MODE_DEF_OUTPUT) { + GPIO_INFO("OUTPUT "); + gpio_output_enable(io_num); + } else { + gpio_output_disable(io_num); + } + GPIO_INFO("|"); + if(pGPIOConfig->pull_up_en) { + GPIO_INFO("PU "); + PIN_PULLUP_EN(io_reg); + } else { + PIN_PULLUP_DIS(io_reg); + } + if(pGPIOConfig->pull_down_en) { + GPIO_INFO("PD "); + PIN_PULLDWN_EN(io_reg); + } else { + PIN_PULLDWN_DIS(io_reg); + } + GPIO_INFO("Intr:%d |\n",pGPIOConfig->intr_type); + gpio_set_intr_type(io_num, pGPIOConfig->intr_type); + if(pGPIOConfig->intr_type) { + gpio_intr_enable(io_num); + } else { + gpio_intr_disable(io_num); + } + PIN_FUNC_SELECT(io_reg, PIN_FUNC_GPIO); /*function number 2 is GPIO_FUNC for each pin */ + } else if(bit_valid && (io_reg == 0)) { + GPIO_WARNING("io_num=%d does not exist\n",io_num); + } + io_num++; + } while(io_num < GPIO_PIN_COUNT); + return ESP_OK; +} + +esp_err_t gpio_isr_register(uint32_t gpio_intr_num, void (*fn)(void*), void * arg) +{ + if(fn == NULL) { + return ESP_ERR_INVALID_ARG; + } + ESP_INTR_DISABLE(gpio_intr_num); + intr_matrix_set(xPortGetCoreID(), ETS_GPIO_INTR_SOURCE, gpio_intr_num); + xt_set_interrupt_handler(gpio_intr_num, fn, arg); + ESP_INTR_ENABLE(gpio_intr_num); + return ESP_OK; +} + +/*only level interrupt can be used for wake-up function*/ +esp_err_t gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + esp_err_t ret = ESP_OK; + if((intr_type == GPIO_INTR_LOW_LEVEL) || (intr_type == GPIO_INTR_HIGH_LEVEL)) { + GPIO.pin[gpio_num].int_type = intr_type; + GPIO.pin[gpio_num].wakeup_enable = 0x1; + } else { + GPIO_ERROR("GPIO wakeup only support Level mode,but edge mode set. gpio_num:%u\n",gpio_num); + ret = ESP_ERR_INVALID_ARG; + } + return ret; +} + +esp_err_t gpio_wakeup_disable(gpio_num_t gpio_num) +{ + if(!is_valid_gpio(gpio_num)) { + return ESP_ERR_INVALID_ARG; + } + GPIO.pin[gpio_num].wakeup_enable = 0; + return ESP_OK; +} diff --git a/components/esp32/component.mk b/components/esp32/component.mk index 6eac77afd3..b41acee60d 100644 --- a/components/esp32/component.mk +++ b/components/esp32/component.mk @@ -27,7 +27,7 @@ ALL_LIB_FILES := $(patsubst %,$(COMPONENT_PATH)/lib/lib%.a,$(LIBS)) # automatically trigger a git submodule update # if any libraries are missing -$(eval $(call SubmoduleRequiredForFiles,$(ALL_LIB_FILES))) +$(eval $(call SubmoduleCheck,$(ALL_LIB_FILES),$(COMPONENT_PATH)/lib)) # this is a hack to make sure the app is re-linked if the binary # libraries change or are updated. If they change, the main esp32 diff --git a/components/esp32/heap_alloc_caps.c b/components/esp32/heap_alloc_caps.c index 5b3ec33dba..46b1125ccb 100644 --- a/components/esp32/heap_alloc_caps.c +++ b/components/esp32/heap_alloc_caps.c @@ -15,7 +15,7 @@ #include -#include "heap_alloc_caps.h" +#include "esp_heap_alloc_caps.h" #include "spiram.h" #include "esp_log.h" @@ -40,23 +40,23 @@ Tag descriptors. These describe the capabilities of a bit of memory that's tagge Each tag contains NO_PRIOS entries; later entries are only taken if earlier ones can't fulfill the memory request. */ static const uint32_t tagDesc[][NO_PRIOS]={ - { MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT, 0 }, //Tag 0: Plain ole D-port RAM - { 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT|MALLOC_CAP_EXEC }, //Tag 1: Plain ole D-port RAM which has an alias on the I-port - { MALLOC_CAP_EXEC|MALLOC_CAP_32BIT, 0, 0 }, //Tag 2: IRAM - { MALLOC_CAP_PID2, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, //Tag 3-8: PID 2-7 IRAM - { MALLOC_CAP_PID3, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID4, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID5, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID6, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID7, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID2, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, //Tag 9-14: PID 2-7 DRAM - { MALLOC_CAP_PID3, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID4, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID5, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID6, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // - { MALLOC_CAP_PID7, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // - { MALLOC_CAP_SPISRAM, 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT|MALLOC_CAP_32BIT}, //Tag 15: SPI SRAM data - { MALLOC_CAP_INVALID, MALLOC_CAP_INVALID, MALLOC_CAP_INVALID } //End + { MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT, 0 }, //Tag 0: Plain ole D-port RAM + { 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT|MALLOC_CAP_EXEC }, //Tag 1: Plain ole D-port RAM which has an alias on the I-port + { MALLOC_CAP_EXEC|MALLOC_CAP_32BIT, 0, 0 }, //Tag 2: IRAM + { MALLOC_CAP_PID2, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, //Tag 3-8: PID 2-7 IRAM + { MALLOC_CAP_PID3, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID4, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID5, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID6, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID7, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID2, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, //Tag 9-14: PID 2-7 DRAM + { MALLOC_CAP_PID3, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID4, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID5, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID6, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // + { MALLOC_CAP_PID7, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT }, // + { MALLOC_CAP_SPISRAM, 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT|MALLOC_CAP_32BIT}, //Tag 15: SPI SRAM data + { MALLOC_CAP_INVALID, MALLOC_CAP_INVALID, MALLOC_CAP_INVALID } //End }; /* @@ -79,81 +79,81 @@ be sorted from low to high start address. This array is *NOT* const because it gets modified depending on what pools are/aren't available. */ static HeapRegionTagged_t regions[]={ - { (uint8_t *)0x3F800000, 0x20000, 15, 0}, //SPI SRAM, if available - { (uint8_t *)0x3FFAE000, 0x2000, 0, 0}, //pool 16 <- used for rom code - { (uint8_t *)0x3FFB0000, 0x8000, 0, 0}, //pool 15 <- can be used for BT - { (uint8_t *)0x3FFB8000, 0x8000, 0, 0}, //pool 14 <- can be used for BT - { (uint8_t *)0x3FFC0000, 0x2000, 0, 0}, //pool 10-13, mmu page 0 - { (uint8_t *)0x3FFC2000, 0x2000, 0, 0}, //pool 10-13, mmu page 1 - { (uint8_t *)0x3FFC4000, 0x2000, 0, 0}, //pool 10-13, mmu page 2 - { (uint8_t *)0x3FFC6000, 0x2000, 0, 0}, //pool 10-13, mmu page 3 - { (uint8_t *)0x3FFC8000, 0x2000, 0, 0}, //pool 10-13, mmu page 4 - { (uint8_t *)0x3FFCA000, 0x2000, 0, 0}, //pool 10-13, mmu page 5 - { (uint8_t *)0x3FFCC000, 0x2000, 0, 0}, //pool 10-13, mmu page 6 - { (uint8_t *)0x3FFCE000, 0x2000, 0, 0}, //pool 10-13, mmu page 7 - { (uint8_t *)0x3FFD0000, 0x2000, 0, 0}, //pool 10-13, mmu page 8 - { (uint8_t *)0x3FFD2000, 0x2000, 0, 0}, //pool 10-13, mmu page 9 - { (uint8_t *)0x3FFD4000, 0x2000, 0, 0}, //pool 10-13, mmu page 10 - { (uint8_t *)0x3FFD6000, 0x2000, 0, 0}, //pool 10-13, mmu page 11 - { (uint8_t *)0x3FFD8000, 0x2000, 0, 0}, //pool 10-13, mmu page 12 - { (uint8_t *)0x3FFDA000, 0x2000, 0, 0}, //pool 10-13, mmu page 13 - { (uint8_t *)0x3FFDC000, 0x2000, 0, 0}, //pool 10-13, mmu page 14 - { (uint8_t *)0x3FFDE000, 0x2000, 0, 0}, //pool 10-13, mmu page 15 - { (uint8_t *)0x3FFE0000, 0x4000, 1, 0x400BC000}, //pool 9 blk 1 - { (uint8_t *)0x3FFE4000, 0x4000, 1, 0x400B8000}, //pool 9 blk 0 - { (uint8_t *)0x3FFE8000, 0x8000, 1, 0x400B0000}, //pool 8 <- can be remapped to ROM, used for MAC dump - { (uint8_t *)0x3FFF0000, 0x8000, 1, 0x400A8000}, //pool 7 <- can be used for MAC dump - { (uint8_t *)0x3FFF8000, 0x4000, 1, 0x400A4000}, //pool 6 blk 1 <- can be used as trace memory - { (uint8_t *)0x3FFFC000, 0x4000, 1, 0x400A0000}, //pool 6 blk 0 <- can be used as trace memory - { (uint8_t *)0x40070000, 0x8000, 2, 0}, //pool 0 - { (uint8_t *)0x40078000, 0x8000, 2, 0}, //pool 1 - { (uint8_t *)0x40080000, 0x2000, 2, 0}, //pool 2-5, mmu page 0 - { (uint8_t *)0x40082000, 0x2000, 2, 0}, //pool 2-5, mmu page 1 - { (uint8_t *)0x40084000, 0x2000, 2, 0}, //pool 2-5, mmu page 2 - { (uint8_t *)0x40086000, 0x2000, 2, 0}, //pool 2-5, mmu page 3 - { (uint8_t *)0x40088000, 0x2000, 2, 0}, //pool 2-5, mmu page 4 - { (uint8_t *)0x4008A000, 0x2000, 2, 0}, //pool 2-5, mmu page 5 - { (uint8_t *)0x4008C000, 0x2000, 2, 0}, //pool 2-5, mmu page 6 - { (uint8_t *)0x4008E000, 0x2000, 2, 0}, //pool 2-5, mmu page 7 - { (uint8_t *)0x40090000, 0x2000, 2, 0}, //pool 2-5, mmu page 8 - { (uint8_t *)0x40092000, 0x2000, 2, 0}, //pool 2-5, mmu page 9 - { (uint8_t *)0x40094000, 0x2000, 2, 0}, //pool 2-5, mmu page 10 - { (uint8_t *)0x40096000, 0x2000, 2, 0}, //pool 2-5, mmu page 11 - { (uint8_t *)0x40098000, 0x2000, 2, 0}, //pool 2-5, mmu page 12 - { (uint8_t *)0x4009A000, 0x2000, 2, 0}, //pool 2-5, mmu page 13 - { (uint8_t *)0x4009C000, 0x2000, 2, 0}, //pool 2-5, mmu page 14 - { (uint8_t *)0x4009E000, 0x2000, 2, 0}, //pool 2-5, mmu page 15 - { NULL, 0, 0, 0} //end + { (uint8_t *)0x3F800000, 0x20000, 15, 0}, //SPI SRAM, if available + { (uint8_t *)0x3FFAE000, 0x2000, 0, 0}, //pool 16 <- used for rom code + { (uint8_t *)0x3FFB0000, 0x8000, 0, 0}, //pool 15 <- can be used for BT + { (uint8_t *)0x3FFB8000, 0x8000, 0, 0}, //pool 14 <- can be used for BT + { (uint8_t *)0x3FFC0000, 0x2000, 0, 0}, //pool 10-13, mmu page 0 + { (uint8_t *)0x3FFC2000, 0x2000, 0, 0}, //pool 10-13, mmu page 1 + { (uint8_t *)0x3FFC4000, 0x2000, 0, 0}, //pool 10-13, mmu page 2 + { (uint8_t *)0x3FFC6000, 0x2000, 0, 0}, //pool 10-13, mmu page 3 + { (uint8_t *)0x3FFC8000, 0x2000, 0, 0}, //pool 10-13, mmu page 4 + { (uint8_t *)0x3FFCA000, 0x2000, 0, 0}, //pool 10-13, mmu page 5 + { (uint8_t *)0x3FFCC000, 0x2000, 0, 0}, //pool 10-13, mmu page 6 + { (uint8_t *)0x3FFCE000, 0x2000, 0, 0}, //pool 10-13, mmu page 7 + { (uint8_t *)0x3FFD0000, 0x2000, 0, 0}, //pool 10-13, mmu page 8 + { (uint8_t *)0x3FFD2000, 0x2000, 0, 0}, //pool 10-13, mmu page 9 + { (uint8_t *)0x3FFD4000, 0x2000, 0, 0}, //pool 10-13, mmu page 10 + { (uint8_t *)0x3FFD6000, 0x2000, 0, 0}, //pool 10-13, mmu page 11 + { (uint8_t *)0x3FFD8000, 0x2000, 0, 0}, //pool 10-13, mmu page 12 + { (uint8_t *)0x3FFDA000, 0x2000, 0, 0}, //pool 10-13, mmu page 13 + { (uint8_t *)0x3FFDC000, 0x2000, 0, 0}, //pool 10-13, mmu page 14 + { (uint8_t *)0x3FFDE000, 0x2000, 0, 0}, //pool 10-13, mmu page 15 + { (uint8_t *)0x3FFE0000, 0x4000, 1, 0x400BC000}, //pool 9 blk 1 + { (uint8_t *)0x3FFE4000, 0x4000, 1, 0x400B8000}, //pool 9 blk 0 + { (uint8_t *)0x3FFE8000, 0x8000, 1, 0x400B0000}, //pool 8 <- can be remapped to ROM, used for MAC dump + { (uint8_t *)0x3FFF0000, 0x8000, 1, 0x400A8000}, //pool 7 <- can be used for MAC dump + { (uint8_t *)0x3FFF8000, 0x4000, 1, 0x400A4000}, //pool 6 blk 1 <- can be used as trace memory + { (uint8_t *)0x3FFFC000, 0x4000, 1, 0x400A0000}, //pool 6 blk 0 <- can be used as trace memory + { (uint8_t *)0x40070000, 0x8000, 2, 0}, //pool 0 + { (uint8_t *)0x40078000, 0x8000, 2, 0}, //pool 1 + { (uint8_t *)0x40080000, 0x2000, 2, 0}, //pool 2-5, mmu page 0 + { (uint8_t *)0x40082000, 0x2000, 2, 0}, //pool 2-5, mmu page 1 + { (uint8_t *)0x40084000, 0x2000, 2, 0}, //pool 2-5, mmu page 2 + { (uint8_t *)0x40086000, 0x2000, 2, 0}, //pool 2-5, mmu page 3 + { (uint8_t *)0x40088000, 0x2000, 2, 0}, //pool 2-5, mmu page 4 + { (uint8_t *)0x4008A000, 0x2000, 2, 0}, //pool 2-5, mmu page 5 + { (uint8_t *)0x4008C000, 0x2000, 2, 0}, //pool 2-5, mmu page 6 + { (uint8_t *)0x4008E000, 0x2000, 2, 0}, //pool 2-5, mmu page 7 + { (uint8_t *)0x40090000, 0x2000, 2, 0}, //pool 2-5, mmu page 8 + { (uint8_t *)0x40092000, 0x2000, 2, 0}, //pool 2-5, mmu page 9 + { (uint8_t *)0x40094000, 0x2000, 2, 0}, //pool 2-5, mmu page 10 + { (uint8_t *)0x40096000, 0x2000, 2, 0}, //pool 2-5, mmu page 11 + { (uint8_t *)0x40098000, 0x2000, 2, 0}, //pool 2-5, mmu page 12 + { (uint8_t *)0x4009A000, 0x2000, 2, 0}, //pool 2-5, mmu page 13 + { (uint8_t *)0x4009C000, 0x2000, 2, 0}, //pool 2-5, mmu page 14 + { (uint8_t *)0x4009E000, 0x2000, 2, 0}, //pool 2-5, mmu page 15 + { NULL, 0, 0, 0} //end }; //Modify regions array to disable the given range of memory. static void disable_mem_region(void *from, void *to) { - int i; - //Align from and to on word boundaries - from=(void*)((uint32_t)from&~3); - to=(void*)(((uint32_t)to+3)&~3); - for (i=0; regions[i].xSizeInBytes!=0; i++) { - void *regStart=regions[i].pucStartAddress; - void *regEnd=regions[i].pucStartAddress+regions[i].xSizeInBytes; - if (regStart>=from && regEnd<=to) { - //Entire region falls in the range. Disable entirely. - regions[i].xTag=-1; - } else if (regStart>=from && regEnd>to && regStartfrom && regEnd<=to) { - //End of the region falls in the range. Modify length. - regions[i].xSizeInBytes-=(uint8_t *)regEnd-(uint8_t *)from; - } else if (regStartto) { - //Range punches a hole in the region! We do not support this. - ESP_EARLY_LOGE(TAG, "region %d: hole punching is not supported!", i); - regions[i].xTag=-1; //Just disable memory region. That'll teach them! - } - } + int i; + //Align from and to on word boundaries + from=(void*)((uint32_t)from&~3); + to=(void*)(((uint32_t)to+3)&~3); + for (i=0; regions[i].xSizeInBytes!=0; i++) { + void *regStart=regions[i].pucStartAddress; + void *regEnd=regions[i].pucStartAddress+regions[i].xSizeInBytes; + if (regStart>=from && regEnd<=to) { + //Entire region falls in the range. Disable entirely. + regions[i].xTag=-1; + } else if (regStart>=from && regEnd>to && regStartfrom && regEnd<=to) { + //End of the region falls in the range. Modify length. + regions[i].xSizeInBytes-=(uint8_t *)regEnd-(uint8_t *)from; + } else if (regStartto) { + //Range punches a hole in the region! We do not support this. + ESP_EARLY_LOGE(TAG, "region %d: hole punching is not supported!", i); + regions[i].xTag=-1; //Just disable memory region. That'll teach them! + } + } } @@ -170,52 +170,52 @@ ToDo: The regions are different when stuff like trace memory, BT, ... is used. M Same with loading of apps. Same with using SPI RAM. */ void heap_alloc_caps_init() { - int i; - //Disable the bits of memory where this code is loaded. - disable_mem_region(&_bss_start, &_heap_start); - disable_mem_region((void*)0x3ffae000, (void*)0x3ffb0000); //knock out ROM data region - disable_mem_region((void*)0x40070000, (void*)0x40078000); //CPU0 cache region - disable_mem_region((void*)0x40078000, (void*)0x40080000); //CPU1 cache region - disable_mem_region((void*)0x40080000, (void*)0x400a0000); //pool 2-5 + int i; + //Disable the bits of memory where this code is loaded. + disable_mem_region(&_bss_start, &_heap_start); + disable_mem_region((void*)0x3ffae000, (void*)0x3ffb0000); //knock out ROM data region + disable_mem_region((void*)0x40070000, (void*)0x40078000); //CPU0 cache region + disable_mem_region((void*)0x40078000, (void*)0x40080000); //CPU1 cache region + disable_mem_region((void*)0x40080000, (void*)0x400a0000); //pool 2-5 - // TODO: this region should be checked, since we don't need to knock out all region finally - disable_mem_region((void*)0x3ffe0000, (void*)0x3ffe8000); //knock out ROM data region + // TODO: this region should be checked, since we don't need to knock out all region finally + disable_mem_region((void*)0x3ffe0000, (void*)0x3ffe8000); //knock out ROM data region #if CONFIG_MEMMAP_BT - disable_mem_region((void*)0x3ffb0000, (void*)0x3ffc0000); //knock out BT data region + disable_mem_region((void*)0x3ffb0000, (void*)0x3ffc0000); //knock out BT data region #endif #if CONFIG_MEMMAP_TRACEMEM - disable_mem_region((void*)0x3fff8000, (void*)0x40000000); //knock out trace mem region + disable_mem_region((void*)0x3fff8000, (void*)0x40000000); //knock out trace mem region #endif #if 0 - enable_spi_sram(); + enable_spi_sram(); #else - disable_mem_region((void*)0x3f800000, (void*)0x3f820000); //SPI SRAM not installed + disable_mem_region((void*)0x3f800000, (void*)0x3f820000); //SPI SRAM not installed #endif - //The heap allocator will treat every region given to it as separate. In order to get bigger ranges of contiguous memory, - //it's useful to coalesce adjacent regions that have the same tag. + //The heap allocator will treat every region given to it as separate. In order to get bigger ranges of contiguous memory, + //it's useful to coalesce adjacent regions that have the same tag. - for (i=1; regions[i].xSizeInBytes!=0; i++) { - if (regions[i].pucStartAddress == (regions[i-1].pucStartAddress + regions[i-1].xSizeInBytes) && - regions[i].xTag == regions[i-1].xTag ) { - regions[i-1].xTag=-1; - regions[i].pucStartAddress=regions[i-1].pucStartAddress; - regions[i].xSizeInBytes+=regions[i-1].xSizeInBytes; - } - } + for (i=1; regions[i].xSizeInBytes!=0; i++) { + if (regions[i].pucStartAddress == (regions[i-1].pucStartAddress + regions[i-1].xSizeInBytes) && + regions[i].xTag == regions[i-1].xTag ) { + regions[i-1].xTag=-1; + regions[i].pucStartAddress=regions[i-1].pucStartAddress; + regions[i].xSizeInBytes+=regions[i-1].xSizeInBytes; + } + } - ESP_EARLY_LOGI(TAG, "Initializing heap allocator:"); - for (i=0; regions[i].xSizeInBytes!=0; i++) { - if (regions[i].xTag != -1) { - ESP_EARLY_LOGI(TAG, "Region %02d: %08X len %08X tag %d", i, - (int)regions[i].pucStartAddress, regions[i].xSizeInBytes, regions[i].xTag); - } - } - //Initialize the malloc implementation. - vPortDefineHeapRegionsTagged( regions ); + ESP_EARLY_LOGI(TAG, "Initializing heap allocator:"); + for (i=0; regions[i].xSizeInBytes!=0; i++) { + if (regions[i].xTag != -1) { + ESP_EARLY_LOGI(TAG, "Region %02d: %08X len %08X tag %d", i, + (int)regions[i].pucStartAddress, regions[i].xSizeInBytes, regions[i].xTag); + } + } + //Initialize the malloc implementation. + vPortDefineHeapRegionsTagged( regions ); } /* @@ -223,7 +223,7 @@ Standard malloc() implementation. Will return ho-hum byte-accessible data memory */ void *pvPortMalloc( size_t xWantedSize ) { - return pvPortMallocCaps( xWantedSize, MALLOC_CAP_8BIT ); + return pvPortMallocCaps( xWantedSize, MALLOC_CAP_8BIT ); } /* @@ -231,30 +231,30 @@ Routine to allocate a bit of memory with certain capabilities. caps is a bitfiel */ void *pvPortMallocCaps( size_t xWantedSize, uint32_t caps ) { - int prio; - int tag, j; - void *ret=NULL; - uint32_t remCaps; - for (prio=0; prio,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: AP mode, DHCP on, will autogen a TC with initial condition + APSTA1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 31.0 + tag: APM1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: AP mode, PC join AP, DHCP on, will autogen a TC with initial + condition APSTA2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 38.0 + tag: APM2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: AP mode, will NOT autogen a TC with initial condition + APSTA1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 31.0 + tag: APO1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: AP mode, will NOT autogen a TC with initial condition + APSTA2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 38.0 + tag: APO2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + initial condition detail: AP only mode, running BIN0 (located on flash id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: APOBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: testing ap on sta + ap mode (autogen by APM1) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 59.0 + tag: APSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: testing ap on sta + ap mode, PC join AP (autogen by APM2) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 66.0 + tag: APSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 5 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + initial condition detail: StationSoftAP mode + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: ATAP1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 5 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, PC join Target AP, multi link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 R *] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: ATAP3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 10 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, PC join Target AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 45.0 + tag: ATAP4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, both PC join Target AP, single link, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAP5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, both PC join Target AP, multi link, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAP6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:2'] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + initial condition detail: SoftAP mode, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 59.0 + tag: ATAPO1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + initial condition detail: SoftAP mode, PC join Target AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 R *] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 66.0 + tag: ATAPO3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: SoftAP mode, PC join Target AP, single link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 73.0 + tag: ATAPO4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: SoftAP mode, both PC join Target AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAPO5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: SoftAP mode, both PC join Target AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAPO6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: ATAPSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode, DHCP client on + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: ATAPSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode, connected to AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 94.0 + tag: ATAPSTA3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, connected to AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 101.0 + tag: ATAPSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, connected to AP, multi link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 129.0 + tag: ATAPSTA5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, connected to AP, single link, use + static ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 136.0 + tag: ATAPSTA6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + initial condition detail: 'first time usage. Use restore function. ' + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 143.0 + tag: ATFTU + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: none + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATNone + test script: InitCondBase +- check cmd set: + - '' + - - DELAY 0.1 + - [dummy] + force restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + initial condition detail: none 2 + restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 108.0 + tag: ATNone2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: same as STA1, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATOSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: same as STA4, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ATOSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:1 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + initial condition detail: same as OT2_1, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 52.0 + tag: ATOT2_1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: station mode, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: station mode, DHCP client on, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + initial condition detail: station mode, connected to AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 38.0 + tag: ATSTA3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: station mode, connected to AP, single link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ATSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: station mode, connected to AP, multi link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 115.0 + tag: ATSTA5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: station mode, connected to AP, single link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 122.0 + tag: ATSTA6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:1 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + initial condition detail: Target 1 in StationSoftAP mode, Target 2 in station mode, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 52.0 + tag: ATT2_1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:3 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=3 + - [R AT2 L OK] + initial condition detail: Target 1 in SoftAP mode, Target 2 in StationSoftAP mode, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=3 + - [R AT2 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 80.0 + tag: ATT2_2 + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] op -S -o 1 + - ['P SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] sta -D + - ['P SSC[1-] C +QAP:OK'] + initial condition detail: all mesh node disabled + restore cmd set: + - '' + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] op -S -o 1 + - ['P SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] sta -D + - ['P SSC[1-] C +QAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: DISABLED + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + force restore cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC[1-] mesh -A -s -k + - ['P SSC[1-] C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 2 + - ['P SSC1 C +MESH:ENABLED'] + - - SOC SOC1 MACCEPT GSOC1 + - [R SOC_COM L OK] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - ['P SSC[2-] C +MESH:ENABLED'] + - - DELAY 60 + - [''] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + - - SSC SSC[1-] mesh -O -t 1 -o 1 + - ['P SSC[1-] C +MESH:OK'] + initial condition detail: all mesh node enabled as ONLINE, mesh network established + restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC[1-] mesh -A -s -k + - ['P SSC[1-] C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 2 + - ['P SSC1 C +MESH:ENABLED'] + - - SOC SOC1 MACCEPT GSOC1 + - [R SOC_COM L OK] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - ['P SSC[2-] C +MESH:ENABLED'] + - - DELAY 60 + - [''] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + - - SSC SSC[1-] mesh -O -t 1 -o 1 + - ['P SSC[1-] C +MESH:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ENABLED_1 + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC1 mesh -A -s -k + - ['P SSC1 C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 1 + - ['P SSC1 C +MESH:ENABLED'] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - [''] + - - DELAY 60 + - ['P SSC[2-] C +MESH:ENABLED'] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + initial condition detail: root as LOCAL, rest node as ONLINE, mesh network established + restore cmd set: + - '' + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC1 mesh -A -s -k + - ['P SSC1 C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 1 + - ['P SSC1 C +MESH:ENABLED'] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - [''] + - - DELAY 60 + - ['P SSC[2-] C +MESH:ENABLED'] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: ENABLED_2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['R SSC[1-] C !!!ready!!!'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -m -o 2 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + initial condition detail: one target in AP mode and espnow is de-initialized + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -m -o 2 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: NOW1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1-] op -Q + - ['R SSC[1-] C +CURMODE:2'] + - - SSC SSC[1-] mac -Q -o 3 + - ['R SSC[1-] P ]_ap_mac> P ]_mac>'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['R SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] op -S -o 3 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 + - ['R SSC[1-] C +MAC:AP,OK'] + - - SSC SSC[1-] mac -S -m ]_mac> -o 1 + - ['R SSC[1-] C +MAC:STA,OK'] + - - SSC SSC[1-] op -S -o 2 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + initial condition detail: multiple () targets in AP mode, espnow is initialized + with self role slave + restore cmd set: + - '' + - - SSC SSC[1-] op -S -o 3 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 + - ['R SSC[1-] C +MAC:AP,OK'] + - - SSC SSC[1-] mac -S -m ]_mac> -o 1 + - ['R SSC[1-] C +MAC:STA,OK'] + - - SSC SSC[1-] op -S -o 2 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: NOW2 + test script: InitCondBase +- check cmd set: + - '' + - - DELAY 0.1 + - [dummy] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + initial condition detail: none + restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + restore post cmd set: + - '' + - - DELAY 0.1 + - [dummy] + script path: InitCondBase.py + start: 10.0 + tag: None + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + initial condition detail: one target and simple is de-inited + restore cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: PAIR1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1,2] op -Q + - ['R SSC[1,2] C +MODE:[2,1]'] + - - SSC SSC[1,2] mac -Q -o 3 + - ['R SSC[1,2] P P '] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC[1,2] reboot + - ['R SSC[1,2] C !!!ready!!!'] + - - SSC SSC[1,2] op -S -o 3 + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] op -S -o [2,1] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + initial condition detail: target1 in AP mode, target2 in STA mode, two targets de-init + and init simple pair + restore cmd set: + - '' + - - SSC SSC[1,2] op -S -o 3 + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] op -S -o [2,1] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 38.0 + tag: PAIR2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1,2] op -Q + - ['R SSC[1,2] C +MODE:[3,3]'] + - - SSC SSC[1,2] mac -Q -o 3 + - ['R SSC[1,2] P P '] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC[1,2] reboot + - ['R SSC[1,2] C !!!ready!!!'] + - - SSC SSC[1,2] op -S -o [3,3] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + initial condition detail: target1 and target2 in STA+AP mode, two targets de-init + and init simple pair + restore cmd set: + - '' + - - SSC SSC[1,2] op -S -o [3,3] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 45.0 + tag: PAIR3 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: testing sta on sta + ap mode, quit AP (autogen by STAM1) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 45.0 + tag: STAAP1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: testing sta on sta + ap mode, join AP, DHCP on (autogen + by STAM2) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 52.0 + tag: STAAP2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: APSTA mode, connected to AP, running BIN0 (located on + flash id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: STAAPBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: sta mode, quit AP, DHCP on, will autogen a TC with initial + condition STAAP1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 17.0 + tag: STAM1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: sta mode, join AP, DHCP on, will autogen a TC with initial + condition STAAP2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 24.0 + tag: STAM2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: STA mode, connected to AP, running BIN0 (located on flash + id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: STAMBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: sta mode, quit AP, will NOT autogen a TC with initial + condition STAAP1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 17.0 + tag: STAO1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: sta mode, join AP, DHCP on, will NOT autogen a TC with + initial condition STAAP2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 24.0 + tag: STAO2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:1'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: same as T2_1 but will NOT autogen a TC with initial condition + T2_2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 73.0 + tag: T2O_1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:1'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: target 1 as SoftAP, target 2 as STA, will autogen a TC + with initial condition T2_2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 73.0 + tag: T2_1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:3'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 3 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: target 1 as AP+STA, target 2 as AP+STA (autogen) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 3 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 80.0 + tag: T2_2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1-3] op -Q + - ['R SSC[1-3] C +CURMODE:3'] + - - SSC SSC[1-3] phy -Q -o 3 + - ['R SSC[1-3] C STA,n,40 C AP,n,40'] + force restore cmd set: + - '' + - - SSC SSC[1-3] reboot + - ['R SSC[1-3] C !!!ready!!!'] + - - SSC SSC[1-3] op -S -o 3 + - ['R SSC[1-3] C +MODE:OK'] + - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 + - ['R SSC[1-3] C +PHY:OK'] + initial condition detail: '1. target 1 and target 2 set to AP+STA mode, target 3 + set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + restore cmd set: + - '' + - - SSC SSC[1-3] op -S -o 3 + - ['R SSC[1-3] C +MODE:OK'] + - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 + - ['R SSC[1-3] C +PHY:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 sta -R -r 1 + - [R SSC1 C OK] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: T3_PHY1 + test script: InitCondBase diff --git a/components/idf_test/integration_test/KnownIssues b/components/idf_test/integration_test/KnownIssues new file mode 100644 index 0000000000..08bc48f185 --- /dev/null +++ b/components/idf_test/integration_test/KnownIssues @@ -0,0 +1,66 @@ + +# NOT SUPPORT + +# ICMP send Ping not supported +TCPIP_ICMP_0101 +^TCPIP_ICMP_0101 + +# IGMP cases are not supported for now +TCPIP_IGMP_0101 +TCPIP_IGMP_0102 +TCPIP_IGMP_0103 +TCPIP_IGMP_0104 +TCPIP_IGMP_0201 +TCPIP_IGMP_0202 +TCPIP_IGMP_0203 +TCPIP_IGMP_0204 +^TCPIP_IGMP_0101 +^TCPIP_IGMP_0102 +^TCPIP_IGMP_0103 +^TCPIP_IGMP_0104 +^TCPIP_IGMP_0201 +^TCPIP_IGMP_0202 +^TCPIP_IGMP_0203 +^TCPIP_IGMP_0204 + +# BUG + +# auth change event +WIFI_CONN_0801 + +# disconnect reason +WIFI_CONN_0904 +^WIFI_CONN_0904 +WIFI_CONN_0901 +^WIFI_CONN_0901 + +# Wifi connect issue +WIFI_CONN_0104 +^WIFI_CONN_0104 + +# DHCP issues +^TCPIP_DHCP_0301 +TCPIP_DHCP_0301 +TCPIP_DHCP_0101 +TCPIP_DHCP_0207 +^TCPIP_DHCP_0207 +TCPIP_DHCP_0208 +^TCPIP_DHCP_0208 + +# TCP issue +TCPIP_TCP_0402 +^TCPIP_TCP_0406 +^TCPIP_TCP_0401 +TCPIP_TCP_0210 +^TCPIP_TCP_0210 +TCPIP_TCP_0103 + + +# UDP issue +TCPIP_UDP_0103 +^TCPIP_UDP_0103 +TCPIP_UDP_0110 +^TCPIP_UDP_0110 + + + diff --git a/components/idf_test/integration_test/TestCaseAll.yml b/components/idf_test/integration_test/TestCaseAll.yml new file mode 100644 index 0000000000..0835c146bd --- /dev/null +++ b/components/idf_test/integration_test/TestCaseAll.yml @@ -0,0 +1,14718 @@ +test cases: +- CI ready: 'Yes' + ID: SYS_MISC_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + comment: '' + execution time: 0.0 + expected result: 重启成功 + initial condition: None + initial condition description (auto): none + level: Integration + module: System + steps: 系统重启 + sub module: Misc + summary: test reboot function + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: sw reboot + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: SYS_MISC_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ram -H + - ['R SSC1 RE FREEHEAP:\d+\r\n'] + comment: '' + execution time: 0.0 + expected result: ' + + 可以查询到一个数值 + + ' + initial condition: None + initial condition description (auto): none + level: Integration + module: System + steps: 查询空闲ram + sub module: Misc + summary: get heap size test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: 'get heap size ' + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -i 0.0.0.0 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -Q + - ['R SSC1 C +STAIP:0.0.0.0'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 ip -Q + - ['R SSC1 RE "\+STAIP:%%s"%%()'] + comment: '' + execution time: 0.0 + expected result: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n\ + 4.target1 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: TCPIP + steps: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1\ + \ 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" + sub module: DHCP + summary: dhcp client function test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ + \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ + 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + sub module: DHCP + summary: dhcp server function test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 3 + - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] + - - SSC SSC1 dhcp -Q -o 3 + - ['R SSC1 C +DHCP:STA,STARTED C +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED NC +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 NC +DHCP:STA,STARTED C +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -E -o 3 + - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] + - - SSC SSC1 dhcp -Q -o 3 + - ['R SSC1 C +DHCP:STA,STOPPED C +DHCP:AP,STOPPED'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.STA&AP STARTED + + 4.STA STARTED + + 5.AP STARTED + + 6.OK + + 7.STA&AP STOPPED' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: TCPIP + steps: '1.target1 设置mode 为sta+softAP mode + + 2.target1 打开DHCP 3 + + 3.target1 查询DHCP 状态 + + 4.target1 查询sta DHCP 状态 + + 5.target1 查询softAP DHCP 状态 + + 6.target1 关闭 DHCP 3 + + 7.target1 查询 DHCP 状态' + sub module: DHCP + summary: dhcp status query + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.1 -e 192.168.4.10 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.4.5 -e 192.168.4.2 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.5 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + comment: '' + execution time: 0.0 + expected result: '1.target1 关闭DHCP 2 OK + + 2.target1 设置ip 成功 + + 3.设置dhcp 地址池 OK + + 4.ERROR + + 5.ERROR + + 6.ERROR + + 7.target1 打开DHCP ok' + initial condition: APM1 + initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial + condition APSTA1 + level: Integration + module: TCPIP + steps: "1.target1 关闭DHCP 2 \n2.target1 设置ip \n3.设置dhcp 地址池\n4.设置dhcp错误的参数\n5.设置dhcp错误的参数\n\ + 6.设置dhcp错误的参数\n7.target1 打开DHCP ok" + sub module: DHCP + summary: server dhcp lease test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 3 4 "['01','02','03']" "[2,3,4]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3,4: get IP from dhcp pool with correct sequence' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP Server on Target1 + + 3. target change mac, connect to Target1 + + 4. Loop step3' + sub module: DHCP + summary: dhcp server ip pool + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 2 4 "['01','02']" "[2,3]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - DELAY 20 + - [''] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:0.0.0.0'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4.1 succeed + + 4.2 failed' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP Server on Target1(.4.2 - .4.3) + + 3. target change mac, connect to Target1 + + 4. Loop step3 twice' + sub module: DHCP + summary: dhcp server ip pool empty + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + - - DELAY 90 + - [''] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + - - SSC SSC2 sta -D + - ['R SSC2 C +JAP:DISCONNECTED'] + - - DELAY 60 + - [''] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. get IP 192.168.4.2 + + 5. succeed + + 6. succeed + + 8. get IP 192.168.4.2' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP timeout as 1 minute + + 3. target2 connect to target1 + + 4. wait 90 seconds + + 5. check if target2 IP is same + + 6. target2 disconnect + + 7. wait 60s + + 8. target2 change mac and connect to target1' + sub module: DHCP + summary: dhcp server timeout test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0205 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 + - ['P SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. target2 wifi disconnected' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 + + 3. disable DHCP server, do config and enable' + sub module: DHCP + summary: disconnect STA if config dhcp server + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0206 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 4 4 "['01','02','03','01']" "[2,3,4,2]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 4. get IP 192.168.4.2 - 192.168.4.4 + + 5. get IP 192.168.4.2' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. disable DHCP server, do config and enable + + 3. target2 change mac, connect to softap, disconnect + + 4. Loop step3 twice + + 5. change to first mac, connect to softap' + sub module: DHCP + summary: dhcp server assign same IP to same MAC when it's not released + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0207 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - WIFI DISCONN2 + - ['R PC_COM NC ERROR C +WIFIDISCONN:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. get IP 192.168.4.2 + + 4. succeed + + 5. succeed + + 6. get IP 192.168.4.2' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. disable DHCP server, do config and enable + + 3. PC WIFI NIC connect to target1 softap + + 4. target2 connect to target1 softap and disnnect + + 5. PC release IP and disconnected + + 6. target2 change mac and connect to target1' + sub module: DHCP + summary: dhcp server prefer assign released IP to new client + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0208 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC2 sta -D + - ['R SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. get IP 192.168.4.2 + + 5. can only find target2 with IP 192.168.4.2' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. PC NIC connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. target2 connect to target1 softap + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig and new client able to get first IP in pool + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0209 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - DELAY 20 + - [''] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client and new client able to get IP + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0210 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - WIFI CONN2 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client able to get IP (discover with requested + IP) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0211 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - DELAY 10 + - [''] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client able to renew IP (direct send request) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -i 192.168.123.123 -o 1 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.JAP CONNETED + + 4.OK + + 5.等待10s，JAP fail' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: TCPIP + steps: '1.target1 关闭DHCP 1 + + 2.target1 设置sta ip 192.168.123.123 + + 4.target1 jap AP + + 5.target1 设置sta ip 0.0.0.0 + + 6.target1 jap AP' + sub module: DHCP + summary: sta dhcp static ip interaction + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: interaction + test point 2: static IP and DHCP interaction test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DHCP_0302 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -i 192.168.123.123 -o 2 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.10 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 ap -S -s -p -t + - [''] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -i 192.168.4.1 -o 2 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.10 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target 1 OK + + 2.target1 ERROR + + 3.target1 ERROR + + 4.target2 jap target1 OK + + 5.target1 OK + + 6.target1 OK + + 7.target1 OK + + 8.target2 jap target1 OK' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n3.target1 设置地址池\n\ + 4.target1下设置ssid 和pwd 加密方式\n5.target2 连接target1 \n6.target1 关闭DHCP 2\n7.target1\ + \ 设置softAP ip \n8.target1 设置正确的地址池\n9.target2 连接target1 " + sub module: DHCP + summary: ap dhcp static ip interaction + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: interaction + test point 2: static IP and DHCP interaction test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DNS_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 C +HOSTIP:OK,115.29.202.58'] + comment: '' + execution time: 0.0 + expected result: 1.OK + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: 1. get host name "espressif.cn" + sub module: DNS + summary: get host by name test + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DNS_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p 9001 + - ['R SSC1 RE \+CONNECT:\d+,OK'] + - - SSC SSC1 soc -S -s -l 10 + - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. get host name "espressif.cn" + + 2. connect, send, recv1. get host name "espressif.cn" + + 2. connect, send, recv' + sub module: DNS + summary: TCP connect to iot.espressif.com + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_DNS_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] + - - SSC SSC1 soc -B -t UDP + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p 9003 -l 10 + - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. get host name "espressif.cn" + + 2. sendto, recvfrom1. get host name "espressif.cn" + + 2. sendto, recvfrom' + sub module: DNS + summary: UDP send to iot.expressif.com + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_ICMP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ping -i + - ['R SSC1 C +PING:OK'] + - - SSC SSC1 ping -i -c 2 + - ['R SSC1 C +PING:OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.ping -i + + 2.ping -i -c 2' + sub module: ICMP + summary: ping function test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: ping function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -J -h -m 223.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. join group with correct host addr and wrong multicast addr + + 3. join group with wrong host addr and correct multicast addr + + 4. join group with wrong host addr and wrong multicast addr' + sub module: IGMP + summary: station IGMP join group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.2 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed + + 5. succeed' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. leave group with correct host addr and wrong multicast addr + + 3. leave group with wrong host addr and correct multicast addr + + 4. leave group with wrong host addr and wrong multicast addr + + 5. leave group with correct host addr and correct multicast addr' + sub module: IGMP + summary: station IGMP leave group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -J -h -m 223.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. join group with correct host addr and wrong multicast addr + + 3. join group with wrong host addr and correct multicast addr + + 4. join group with wrong host addr and wrong multicast addr' + sub module: IGMP + summary: softAP IGMP join group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.2 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed + + 5. succeed' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. leave group with correct host addr and wrong multicast addr + + 3. leave group with wrong host addr and correct multicast addr + + 4. leave group with wrong host addr and wrong multicast addr + + 5. leave group with correct host addr and correct multicast addr' + sub module: IGMP + summary: softAP IGMP leave group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC1 SENDTO 1 224.1.1.1 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. able to recv packet' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. join group + + 2. create UDP socket using multicast addr + + 3. PC send UDP packet to multicast addr' + sub module: IGMP + summary: station IGMP recv packets + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. target1 recv multicast packet' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. target2 set to sta mode and join AP + + 2. target1 join group and create UDP socket using multicast addr + + 3. target2 create UDP socket + + 4. target2 send to multicast addr' + sub module: IGMP + summary: station send multicast packets + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC1 SENDTO 1 224.1.1.1 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. able to recv packet' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. join group + + 2. create UDP socket using multicast addr + + 3. PC send UDP packet to multicast addr' + sub module: IGMP + summary: softAP IGMP recv packets + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IGMP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. target1 recv multicast packet' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: TCPIP + steps: '1. target2 join SoftAP + + 2. target1 join group and create UDP socket using multicast addr + + 3. target2 create UDP socket + + 4. target2 send to multicast addr' + sub module: IGMP + summary: softAP send multicast packets + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.123.123'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ERROR + + 3.OK + + 4.OK + + 5.STAIP:192.168.123.123' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: TCPIP + steps: '1.target1 打开DHCP 1 + + 2.target1 设置sta ip 192.168.123.123 + + 4.target1 关闭DHCP 1 + + 5.target1 设置sta ip 192.168.123.123 + + 6.target1 查询 当前sta ip ' + sub module: IP + summary: sta set and query static ip test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: set and query static IP + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_IP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 2 + - ['R SSC1 C +APIP:192.168.123.123'] + - - SSC SSC1 ip -S -o 2 -i + - ['R SSC1 C +IP:OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ERROR + + 3.OK + + 4.OK + + 5.APIP:192.168.123.123 + + 6.OK' + initial condition: APM1 + initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial + condition APSTA1 + level: Integration + module: TCPIP + steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n4.target1 关闭DHCP\ + \ 2\n5.target1 设置softAP ip 192.168.123.123\n6.target1 查询 当前sta ip \n7.target1\ + \ 设置softAP ip 为target_ap_ip" + sub module: IP + summary: ap set and query static ip test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: set and query static IP + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i 123.456.678.789 -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.ERROR + + 6.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 + + 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' + sub module: TCP + summary: STA mode, connect test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC1 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] + - - SOC SOC1 CONNECT + - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.PC TCP client accept + + 4.error' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.target1上创建TCP socket，bind到本地端口 + + 2.target1上使用步骤1创建的socket,创建TCP 监听 + + 3.PC TCP 连接到target1 , + + 4.PC tcp 连接到不存在的port ,' + sub module: TCP + summary: STA mode, server listen test. use different kinds of port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SOC SOC2 SEND 5 + - [R SSC1 SL +5] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] + - - SOC SOC2 SEND 146000 + - [R SSC1 SL +146000] + - - SSC SSC1 soc -S -s -l 1460 -n 100 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc上回accept + + 4.OK + + 5.target收到5 byte + + 6.PC收到5 byte + + 7.target收到 146000 byte + + 8.OK,PC 回SOC_RECV=SOC2,RECV_LEN=字节数' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.PC send 5 bytes to 8266 + + 6.8266 send 5 bytes to PC + + 7. PC send 100 * 1460 data to 8266, + + 8.8266 send 100 * 1460 to PC. ' + sub module: TCP + summary: STA mode, send/recv basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h W + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h R + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept OK + + 4.OK + + 5.OK + + 6.OK,pc tcp server accept OK + + 7.OK + + 8.OK + + 9.OK,pc tcp server accept OK + + 10.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1 shutdown socket1 B + + 5.target1上创建TCP socket + + 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 7.target1 shutdown socket2 W + + 8.target1上创建TCP socket + + 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1 shutdown socket3 R' + sub module: TCP + summary: STA mode, shutdown basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK + + 6.OK + + 7.target1关闭socket1 + + 8.target1关闭socket2 + + 9.OK + + 10.OK,pc tcp server accept成功 + + 11.target1关闭socket1 + + 12.OK + + 13.OK,pc tcp server accept成功 + + 14.OK + + 15.target1关闭socket1' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ + 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ + 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ + 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" + sub module: TCP + summary: STA mode, close for different types of TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0106 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4 OK + + 5.OK,pc tcp server accept成功 + + 6.OK + + 7.OK,pc tcp server accept成功 + + 8 OK + + 9.OK,pc tcp server accept成功 + + 10.OK + + 11.OK,pc tcp server accept成功' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 6.target1上创建TCP socket3 + + 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 8.target1上创建TCP socket4 + + 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1上创建TCP socket5 + + 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' + sub module: TCP + summary: STA mode, create max TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0107 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC3 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC4 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC5 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC6 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + comment: '' + execution time: 0.0 + expected result: '1.+BIND:0，OK,0.0.0.0 + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK,pc tcp server accept成功 + + 5.OK,pc tcp server accept成功 + + 6.OK,pc tcp server accept成功 + + 7.OK,pc tcp server accept成功' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ + \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6\ + \ " + sub module: TCP + summary: STA mode, accept max TCP client by server test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0110 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i 123.456.678.789 -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.ERROR + + 6.ERROR' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 + + 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' + sub module: TCP + summary: AP mode, connect test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0111 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC1 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] + - - SOC SOC1 CONNECT 0 + - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.PC TCP client accept + + 4.error' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.target1上创建TCP socket，bind到本地端口 + + 2.target1上使用步骤1创建的socket,创建TCP 监听 + + 3.PC TCP 连接到target1 , + + 4.PC tcp 连接到不存在的port ,' + sub module: TCP + summary: AP mode, server listen test. use different kinds of port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0112 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SOC SOC2 SEND 5 + - [R SSC1 SL +5] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] + - - SOC SOC2 SEND 146000 + - [R SSC1 SL +146000] + - - SSC SSC1 soc -S -s -l 1460 -n 100 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.target收到5byte数据 + + 6.PC收到5byte数据 + + 7.target收到146000 byte数据 + + 8.OK,PC 收到146000 byte数据' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.PC send 5 bytes to 8266 + + 6.8266 send 5 bytes to PC + + 7. PC send 100 * 1460 data to 8266, + + 8.8266 send 100 * 1460 to PC. ' + sub module: TCP + summary: AP mode, send/recv basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0113 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h W + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h R + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK,pc tcp server accept成功 + + 7.OK + + 8.OK + + 9.OK,pc tcp server accept成功 + + 10.OK' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1 shutdown socket1 B + + 5.target1上创建TCP socket + + 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 7.target1 shutdown socket2 W + + 8.target1上创建TCP socket + + 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1 shutdown socket3 R' + sub module: TCP + summary: AP mode, shutdown basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0114 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK + + 6.OK,target1上accept 成功 + + 7.target1关闭socket1 + + 8.target1关闭socket2 + + 9.OK + + 10.OK,pc tcp server accept成功 + + 11.target1关闭socket1 + + 12.OK + + 13.OK,pc tcp server accept成功 + + 14.OK + + 15.target1关闭socket1' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ + 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ + 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ + 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" + sub module: TCP + summary: AP mode, close for different types of TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0115 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4 OK + + 5.OK,pc tcp server accept成功 + + 6.OK + + 7.OK,pc tcp server accept成功 + + 8 OK + + 9.OK,pc tcp server accept成功 + + 10.OK + + 11.OK,pc tcp server accept成功' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 6.target1上创建TCP socket3 + + 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 8.target1上创建TCP socket4 + + 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1上创建TCP socket5 + + 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' + sub module: TCP + summary: AP mode, create max TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0116 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC3 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC4 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC5 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC6 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + comment: '' + execution time: 0.0 + expected result: '1.+BIND:0，OK,0.0.0.0 + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK,pc tcp server accept成功 + + 5.OK,pc tcp server accept成功 + + 6.OK,pc tcp server accept成功 + + 7.OK,pc tcp server accept成功' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ + \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6\ + \ " + sub module: TCP + summary: AP mode, accept max TCP client by server test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['P SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.OK + + 9.OK + + 10.OK + + 11.OK + + 12.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去连接 PC的ip， + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket,创建TCP 监听 + + 6.target1上使用步骤4创建的socket，去连接 PC的ip， + + 7.target1上创建TCP socket + + 8.target1上使用步骤7创建的socket，去连接 PC的ip， + + 9.target1上关闭步骤7创建的socket + + 10.target1上使用步骤7创建的socket，去连接 PC的ip， + + 11.target1上关闭所有创建的socket + + 12.target1上使用步骤2创建的socket，去连接 PC的ip，' + sub module: TCP + summary: STA mode, connect test. use socket in state that can't connect + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -L -s 1000 + - ['R SSC1 RE LISTEN:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去建立TCP 监听 + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket，去连接 PC的ip， + + 6.target1上使用步骤4创建的socket,创建TCP 监听 + + 7.target1上shutdown 步骤4的socket + + 8.target1上使用步骤4创建的socket,创建TCP 监听 + + 9.target1上使用不存在socket,创建TCP 监听' + sub module: TCP + summary: STA mode, server listen test. use socket in state that can't listen + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -S -s 1000 + - ['R SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK + + 5.ERROR + + 6.OK + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket1， + + 3.target1上使用步骤2创建的socket1，去发送数据 + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去发送数据 + + 6.target1上使用步骤4创建的socket2,创建TCP连接，连接成功 + + 7.target1上shutdown 步骤4的socket2 + + 8.target1往socket2发送错误命令发送数据 + + 9.target1上不指定socket往上发送数据' + sub module: TCP + summary: send test. use socket in state that can't send + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC2 SEND 146000 + - [P SOC_COM R *] + - - SSC SSC1 soc -W -s -o 1 + - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc server accept OK + + 4.OK + + 5.OK + + 6.OK + + 7.target收到146000 byte + + ' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.target上不进行recv + + 6.PC send 100 * 1460 data to target, + + 7.在target上开始recv' + sub module: TCP + summary: STA mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0206 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK + + 9.PC OK, target1 +ACCEPT:3,2,,port + + 10.+SOCINFO:,,, + + +SOCINFO:,,, + + +SOCINFO:, + + +SOCINFO:,,, + + +SOCINF0ALL' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ + \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" + sub module: TCP + summary: STA mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0207 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['P SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2 OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.OK + + 9.OK + + 10.OK + + 11.OK + + 12.ERROR' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去连接 PC的ip， + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket,创建TCP 监听 + + 6.target1上使用步骤4创建的socket，去连接 PC的ip， + + 7.target1上创建TCP socket + + 8.target1上使用步骤7创建的socket，去连接 PC的ip， + + 9.target1上关闭步骤7创建的socket + + 10.target1上使用步骤7创建的socket，去连接 PC的ip， + + 11.target1上关闭所有创建的socket + + 12.target1上使用步骤2创建的socket，去连接 PC的ip，' + sub module: TCP + summary: AP mode, connect test. use socket in state that can't connect + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0208 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -L -s 1000 + - ['R SSC1 RE LISTEN:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4 OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去建立TCP 监听 + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket，去连接 PC的ip， + + 6.target1上使用步骤4创建的socket,创建TCP 监听 + + 7.target1上shutdown 步骤4的socket + + 8.target1上使用步骤4创建的socket,创建TCP 监听 + + 9.target1上使用不存在socket,创建TCP 监听' + sub module: TCP + summary: AP mode, server listen test. use socket in state that can't listen + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0210 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC2 SEND 146000 + - [P SOC_COM R *] + - - SSC SSC1 soc -W -s -o 1 + - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 6.OK + + 7.收到 146000 数据 + + ' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.target停止调用recv + + 6.PC send 100 * 1460 data to 8266, + + 7.target重新调用recv' + sub module: TCP + summary: AP mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0212 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK + + 9.PC OK, target1 +ACCEPT:3,2,,port + + 10.+SOCINFO:,,, + + +SOCINFO:,,, + + +SOCINFO:, + + +SOCINFO:,,, + + +SOCINF0ALL' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ + \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" + sub module: TCP + summary: AP mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0401 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.断开与AP 连接 + + 6.8266往PC上发送5字节数据' + sub module: TCP + summary: do TCP send after WIFI disconnected + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0402 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.断开与AP 连接 + + 6.关闭建立的socket1连接' + sub module: TCP + summary: "close TCP socket after WIFI \ndisconnected" + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0403 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ + \ \n6.8266往PC上发送5字节数据" + sub module: TCP + summary: do TCP send after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0404 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ + \ \n6.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0405 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -S -s -l 1 + - [''] + - - DELAY 5400 + - ['P SSC1 RE CLOSED:\d+,0'] + comment: '' + execution time: 1.5 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.TCP连接断开' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.PC 网卡 disable + + 6.target1上使用socket1发送数据，等待 90 分钟' + sub module: TCP + summary: do TCP send after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0406 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.PC上网卡禁止掉 \n6.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0407 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ + \ ip \n7.查询sta ip 地址是否生效\n8.8266往PC上发送5字节数据" + sub module: TCP + summary: do TCP send after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0408 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ + \ ip \n7.查询sta ip 地址是否生效\n8.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0411 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.target1上创建TCP socket2 + + 6.8266往PC socket2上发送5字节数据 + + 7.8266往PC socket1上发送5字节数据' + sub module: TCP + summary: do TCP send after socket changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_TCP_0412 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.target1上创建TCP socket2 + + 6.关闭socket1 连接 + + 7.关闭socket2连接' + sub module: TCP + summary: close TCP send after socket changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 C BIND:ERROR'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上创建TCP socket3, target_udp_port1' + sub module: UDP + summary: STA mode, udp bind test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC2 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 10 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 10] + - - SSC SSC1 soc -S -s -i -p -l 10 + - ['P SSC1 RE SEND:(\d+),OK', P SOC2 UL 10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.PC上SOC2 UDP传输，bing + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 + + 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' + sub module: UDP + summary: STA mode, sendto test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] + - - SSC SSC1 soc -S -s -i -p -l 1472 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] + - - SSC SSC1 soc -S -s -i -p -l 1473 + - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] + - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没有到UDP包 + + 6.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 + + 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 + + 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' + sub module: UDP + summary: STA mode, sendto test with different length + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SOC SOC1 SENDTO 1 + - [R SSC1 SL +1] + - - SOC SOC1 SENDTO 1472 + - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] + - - SOC SOC1 SENDTO 1473 + - [P SSC1 NC +RECVFROM, P SOC_COM C OK] + - - SOC SOC2 BIND + - [R SOC_COM L OK] + - - SOC SOC2 SENDTO 1472 + - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没收到UDP包 + + 6.OK + + 7.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.PC往8266上发送1字节数据 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1473字节数据 + + 6.PC上SOC2 UDP传输，bing + + 7.PC往8266上发送1472字节数据' + sub module: UDP + summary: STA mode, recvfrom basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.关闭socket1' + sub module: UDP + summary: STA mode, close UDP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0106 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok + + 3.ok + + 4.ok + + 5.ok' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 + + 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 + + 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 + + 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' + sub module: UDP + summary: STA mode, create max udp socket test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0107 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上查询创建socket信息' + sub module: UDP + summary: STA mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0108 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 C BIND:ERROR'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上创建TCP socket3, target_udp_port1' + sub module: UDP + summary: AP mode, udp bind test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0109 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC2 ip + - ['R SSC2 A :STAIP:(.+)\r\n'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - [R SOC1 UL 5] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['R SSC2 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.PC上SOC2 UDP传输，bing + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 + + 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' + sub module: UDP + summary: AP mode, sendto test. use different ip, port + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0110 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] + - - SSC SSC1 soc -S -s -i -p -l 1472 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] + - - SSC SSC1 soc -S -s -i -p -l 1473 + - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] + - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 + -j 20 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没收到UDP包 + + 6.OK' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 + + 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 + + 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' + sub module: UDP + summary: AP mode, sendto test with different length + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0111 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC2 ip + - ['R SSC2 A :STAIP:(.+)\r\n'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SOC SOC1 SENDTO 5 + - ['R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] + - - SSC SSC2 soc -S -s -i -p -l 5 + - ['R SSC1 RE "RECVFROM:%%s,5,%%s,%%u"%%(,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没收到UDP包 + + 6.OK + + 7.OK' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.PC往8266上发送1字节数据 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1473字节数据 + + 6.PC上SOC2 UDP传输，bing + + 7.PC往8266上发送1472字节数据' + sub module: UDP + summary: AP mode, recvfrom basic test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0112 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.关闭socket1' + sub module: UDP + summary: AP mode, close UDP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0113 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok + + 3.ok + + 4.ok + + 5.ok' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 + + 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 + + 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 + + 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' + sub module: UDP + summary: AP mode, create max udp socket test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0114 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上查询创建socket信息' + sub module: UDP + summary: AP mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.PC OK + + 5.PC OK + + 6.PC OK + + 7.PC OK + + 8.PC OK SOC_CLOSE=SOC1' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上关闭工作线程 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1472字节数据 + + 6.PC往8266上发送1472字节数据 + + 7.PC往8266上发送1472字节数据 + + 8.PC往8266上发送1472字节数据' + sub module: UDP + summary: STA mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: use UDP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.PC OK + + 5.PC OK + + 6.PC OK + + 7.PC OK + + 8.PC OK SOC_CLOSE=SOC1' + initial condition: APM2 + initial condition description (auto): AP mode, PC join AP, DHCP on, will autogen + a TC with initial condition APSTA2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上关闭工作线程 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1472字节数据 + + 6.PC往8266上发送1472字节数据 + + 7.PC往8266上发送1472字节数据 + + 8.PC往8266上发送1472字节数据' + sub module: UDP + summary: AP mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: use UDP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 + + 4.断开与AP 连接 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据' + sub module: UDP + summary: do UDP send after WIFI disconnected + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0302 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK + + ' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 + + 4.断开与AP 连接 + + 5.关闭建立的socket1连接' + sub module: UDP + summary: "close UDP socket after WIFI \ndisconnected" + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0303 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.ERROR' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.修改8266的Mode为softAP mode \n5.8266往PC上发送5字节数据" + sub module: UDP + summary: do UDP send after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0304 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.修改8266的Mode为softAP mode \n5.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0305 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.PC上网卡禁止掉 \n5.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0306 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据" + sub module: UDP + summary: do UDP send after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: TCPIP_UDP_0307 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_ADDR_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 1 -m 44:55:66:77:88:99 + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 mac -S -o 2 -m 22:33:44:55:66:77 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 mac -Q -o 3 + - ['R SSC1 C +STAMAC:44:55:66:77:88:99 C +APMAC:22:33:44:55:66:77'] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ok + + 3.ok + + 4.ok + + 5.ok + + 6.ok' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: "1.target1 设置mode 为sta+softAP mode\n2.target1 设置sta mode 下的mac \n3.target1\ + \ 设置softAP mode 下的mac\n4.target1 查询softAP+sta 下的mac\n5.target1 设置sta mode 下的mac\ + \ 为target1_mac\n6.target1 设置softAP mode 下的mac 为target1_ap_mac\n" + sub module: MAC Address + summary: set mac, query mac + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: mac address function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_ADDR_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 mac -S -o 2 -m 44:55:66:77:88:99 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - [''] + - - SSC SSC2 sta -S -b 44:55:66:77:88:99 + - ['R SSC2 RE \+SCAN:.+,44:55:66:77:88:99,'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -Q -o 1 + - ['R SSC2 A :\+STAMAC:(.+)\r\n'] + - - SSC SSC2 mac -S -o 1 -m 22:33:44:55:66:77 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -L + - ['R SSC1 C +LSTA:22:33:44:55:66:77'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ok + + 3.ok + + 4.ok + + 5.ok + + 6.ok + + 7.ok + + 8.ok + + 9.ok' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: "1.target1 设置sta mode下的mac 44:55:66:77:88:99\n2.target1下设置ssid 和pwd 加密方式\n\ + 3.target2 查询mac为44:55:66:77:88:99的ssid\n4.target1 设置sta mode下的mac target_ap_mac\n\ + 5.target2 查询sta mode 下的mac 为target2_mac_tmp\n6.target2 设置sta mode 下的mac 为22:33:44:55:66:77\n\ + 7.target2 jap target1\n8.target1 查询连接到的sta \n9.target2 设置sta mode 下的mac 为 target2_mac\n" + sub module: MAC Address + summary: set mac and do scan/JAP/SAP + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: mac address function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -t 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 2 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] + - - SSC SSC1 ap -S -s -p -t 5 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set\ + \ AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2\ + \ jap succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1\ + \ set AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target\ + \ 2 上查询到target_ssid" + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid\ + \ 和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk\ + \ \n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2\ + \ jap target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid\ + \ 和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid" + sub module: WIFI Connect + summary: station SAP+JAP test, different encryption + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -t 0 -n 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -t 0 -n 13 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -n 15 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - ['R SSC2 RE "\+SCAN:%%s,.+,\d+,1"%%()'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP,set channel 1 + + 2.target 2 jap succeed + + 3.target1 set AP,set channel 10 + + 4.target 2 jap succeed + + 5.target1 set AP,set channel 15 + + 6.target 2 上查询到target_ssid' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1. target1下设置ssid 和pwd 加密方式,set channel 1 + + 2.target2 jap target 1 + + 3.target1下设置ssid 和pwd 加密方式,set channel 10 + + 4.target2 jap target 1 + + 5.target1下设置ssid 和pwd 加密方式,set channel 15 + + 6.target 2 上查询target_ssid' + sub module: WIFI Connect + summary: station SAP+JAP test, different channel + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -h + 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 P , R SSC2 C +SCANDONE] + - - SSC SSC1 ap -S -s -p -t -h + 1 + - ['R SSC1 C +SAP:OK'] + - - DELAY 3 + - [''] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 C +SCANDONE] + - - DELAY 3 + - [''] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 NP C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP,set ssid broad cast + + 2.target 2上scan target_ap_mac + + 3.target1 set AP,set ssid hidden, + + 4.target 2上不能scan target_ap_mac' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1. target1下设置ssid 和pwd 加密方式,set ssid broad cast + + 2.target 2上scan target_ap_mac + + 3. target1下设置ssid 和pwd 加密方式,set ssid hidden, + + 4.target 2上scan target_ap_mac' + sub module: WIFI Connect + summary: station SAP+JAP test, ssid hidden + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -m + 1 + - ['R SSC1 C +SAP:OK'] + - - WIFI DISCONN + - ['R PC_COM C +WIFIDISCONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - WIFI CONN + + - ['R PC_COM C +WIFICONN:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP,set max allowed sta as 1 + + 2. use PC disconnect, + + 3.target 2 jap succeed + + 4.PC WIFI can not CONN' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1 + + 2.use PC disconnect target1 + + 3.target 2 jap target1 + + 4.PC WIFI CONNECT target1' + sub module: WIFI Connect + summary: station SAP test, max allowed sta + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:OK'] + - - SSC SSC1 sta -Q + - ['R SSC1 C +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target1 jion AP 成功 + + 2.查询JAP的状态 + + 3.target1 断开AP + + 4.查询target1 JAP 是DISCONN' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: '1.target1 jion AP 成功 + + 2.查询JAP的状态 + + 3.target1 断开AP + + 4.查询target1 JAP 是DISCONN' + sub module: WIFI Connect + summary: JAP query test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: query JAP status + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -h + 0 -m 8 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP + + 2.target 1上查询到跟设置AP时一致 + + ' + initial condition: APM1 + initial condition description (auto): AP mode, DHCP on, will autogen a TC with initial + condition APSTA1 + level: Integration + module: WIFI MAC + steps: '1. target1 set AP + + 2.target 1上查询到跟设置AP时一致 + + ' + sub module: WIFI Connect + summary: AP config query test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: query AP config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0401 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -R -a 0 + - ['R SSC1 C +AUTORECONN:OK'] + - - SSC SSC1 sta -R -a 2 + - ['R SSC1 C +AUTORECONN:0'] + - - SSC SSC1 reboot + - [''] + - - DELAY 15 + - [''] + - - SSC SSC1 sta -Q + - ['R SSC1 C JAP:DISCONNECTED'] + - - SSC SSC1 sta -R -a 1 + - ['R SSC1 C +AUTORECONN:OK'] + - - SSC SSC1 sta -R -a 2 + - ['R SSC1 C +AUTORECONN:1'] + - - SSC SSC1 reboot + - ['R SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.设置autoreconn,关闭 + + 2.查询当前autoreconn状态是否关闭 + + 3.重启系统，等待15s + + 4.查询target1 未自动重连AP + + 5.设置autoreconn,开启 + + 6.查询当前autoreconn状态是否开启 + + 7.系统重启后target1 自动重连AP' + initial condition: STAM2 + initial condition description (auto): sta mode, join AP, DHCP on, will autogen a + TC with initial condition STAAP2 + level: Integration + module: WIFI MAC + steps: '1.设置autoreconn,关闭 + + 2.查询当前autoreconn状态是否关闭 + + 3.重启系统，等待15s + + 4.查询target1 未自动重连AP + + 5.设置autoreconn,开启 + + 6.查询当前autoreconn状态是否开启 + + 7.系统重启后target1 自动重连AP' + sub module: WIFI Connect + summary: auto reconnect test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: power on auto reconnect test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0501 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - [''] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 15 + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 0 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC2 sta -R -r 2 + - ['R SSC2 C +RECONN:0'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - [''] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 15 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + comment: '' + execution time: 0.0 + expected result: '1.设置reconn,开启（此功能不需要重启系统） + + 2.target1 set AP + + 3.target2 JAP target1 成功 + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.成功 + + 7.查询reconn状态，关闭 + + 8.修改mode 成功 + + 9.等待15s，target2 不会自动重连target1' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1\ + \ \n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n\ + 7.查询reconn状态，关闭\n8.target1 修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode" + sub module: WIFI Connect + summary: reconnect policy test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: reconnect policy test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0502 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 5 + - ['R SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP + + 2.target2 jap target 1 + + 3.设置reconn,开启（此功能不需要重启系统） + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.target2 断开target1 连接' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式 + + 2.target2 jap target 1 + + 3.设置reconn,开启（此功能不需要重启系统） + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.target2 断开target1 连接' + sub module: WIFI Connect + summary: will not do reconnect after manually disconnected + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: reconnect policy test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0601 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -L + - ['R SSC1 C +LSTA:', 'R SSC1 C +LSTA:', R SSC1 C +LSTADONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP + + 2.PC WIFI CONNECTED + + 3.target2 jap target 1 + + 4.查询到两个sta 连接到target1 上' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1. target1下设置ssid 和pwd 加密方式 + + 2.PC WIFI CONNECTED target1 + + 3.target2 jap target 1 + + 4.查询到两个sta 连接到target1 上' + sub module: WIFI Connect + summary: list stations connected to soft ap test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: list SoftAP connected station + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0801 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -S -s -p -t 2 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,2,0'] + - - SSC SSC1 ap -S -s -p -t 3 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,3,2'] + - - SSC SSC1 ap -S -s -p -t 4 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,4,3'] + - - SSC SSC1 ap -S -s -p -t 0 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,0,4'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. auth change event old mode 0 new mode 2 + + 4. auth change event old mode 2 new mode 3 + + 5. auth change event old mode 3 new mode 4 + + 6. auth change event old mode 4 new mode 0' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1. set target1 softap auth mode 0 + + 2. target2 connect to target1 + + 3. set target1 softap auth mode 2, wait sta connected + + 4. set target1 softap auth mode 3, wait sta connected + + 5. set target1 softap auth mode 4, wait sta connected + + 6. set target1 softap auth mode 0, wait sta connected' + sub module: WIFI Connect + summary: test auth change event + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi auth changed event test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0901 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: basic function + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 sta -D + - ['R SSC1 RE JAP:DISCONNECTED,\d+,8'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE JAP:DISCONNECTED,\d+,15'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE JAP:DISCONNECTED,\d+,201'] + comment: '' + execution time: 0.0 + expected result: '1. disconnect event reason REASON_ASSOC_LEAVE + + 2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT + + 3. disconnect event reason REASON_NO_AP_FOUND' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: '1. sta connect to AP, and disconnect + + 2. connect to AP with wrong password + + 3. connect to AP not exist' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT, + REASON_NO_AP_FOUND + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0902 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - APC OFF + - [P PC_COM L OK, 'R SSC1 RE JAP:DISCONNECTED,\d+,200'] + - - APC ON + - [P PC_COM L OK] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. disconnect event REASON_BEACON_TIMEOUT' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: '1. connect to AP + + 2. AP power off' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_BEACON_TIMEOUT + test environment: SSC_T1_APC + test environment description (auto): "PC has 1 wired NIC connected to AP.\nPC has\ + \ 1 wired NIC connected to APC (static IP within the same subnet with APC). \n\ + APC control AP power supply. \nPC has 1 WiFi NIC. \n1 SSC target connect with\ + \ PC by UART." + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0903 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p bacfd + - ['R SSC1 RE JAP:DISCONNECTED,\d+,2'] + comment: '' + execution time: 0.0 + expected result: 1. disconect event reason REASON_AUTH_EXPIRE + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: 1. connect WEP ap with error password (valid wep password) + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_AUTH_EXPIRE + test environment: SSC_T1_WEP + test environment description (auto): '1 SSC target connect with PC by UART. + + One WEP share key AP placed near SSC1.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_CONN_0904 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 3 -m 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p 1234567890 + - ['R SSC2 RE JAP:DISCONNECTED,\d+,204'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - WIFI CONN + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE JAP:DISCONNECTED,\d+,5'] + - - WIFI DISCONN + - [P PC_COM C OK, 'R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -S -s -p -t 3 -m 1 + - ['P SSC1 C +SAP:OK', 'P SSC2 RE JAP:DISCONNECTED,\d+,4'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. disconnect event REASON_HANDSHAKE_TIMEOUT + + 3. succeed + + 4. succeed + + 5. disconnect event REASON_ASSOC_TOOMANY + + 6. succeed, target2 connect succeed + + 7. disconnect event REASON_ASSOC_EXPIRE' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1. config target1 softap max sta allowed 1 + + 2. target2 connect to target1 with wrong password + + 3. target2 disconnect + + 4. PC WIFI NIC connect to target1 + + 5. target2 connect to target1 with correct password + + 6. PC WIFI NIC disconnect + + 7. reconfig softap' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT, + REASON_ASSOC_EXPIRE + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_MODE_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC2 sta -S + - [R SSC2 NP C +SCANDONE] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:OK'] + comment: '' + execution time: 0.0 + expected result: '1.target1下设置ssid 和pwd 、加密方式成功 + + 2.修改target 1的mode 为sta mode + + 3.target1的dhcp打开 + + 4.target1成功连接上AP + + 5.target2上不能查询到target_ssid + + 6.target1断开AP' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式 + + 2.修改target1的mode 为sta mode + + 3.target1的dhcp打开 + + 4.target1连接AP + + 5.target2查询target_ssid + + 6.target1断开AP' + sub module: WIFI Mode + summary: mode switch test (sta mode) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi mode fucntion + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_MODE_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - [R SSC2 P , R SSC2 C +SCANDONE] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:ERROR'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP + + 2.target 2 上查询到target_ssid + + 3. target1 can''t join AP + + 4. target1 can''t QAP' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式 + + 2.target 2 上查询target_ssid + + 3.target1 join AP + + 4.target1 DISCONN AP' + sub module: WIFI Mode + summary: mode switch test (AP mode) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi mode fucntion + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_MODE_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC2 sta -S + - [R SSC2 P , R SSC2 C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 change to AP mode + + 2.target1 set AP + + 3.target 1 的dhcp 打开 + + 4.target 1 成功连接上AP + + 5.target 2 上查询到target_ssid' + initial condition: T2O_1 + initial condition description (auto): same as T2_1 but will NOT autogen a TC with + initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1 change to AP mode + + 2.target1下设置ssid 和pwd 加密方式 + + 3.target1 的dhcp 打开 + + 4.target1 连接AP + + 5.target2 上查询target_ssid' + sub module: WIFI Mode + summary: mode switch test (STA+AP mode) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi mode fucntion + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0401 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 20 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC1 NC +JAP:DISCONNECTED', 'P SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, both bandwidth 20M, STA not disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht20, in channel1, ext AP 11n ht20, in channel2 + + 2. STA connect to ext AP + + 3. AP get connected' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, both bandwidth 20M, STA connect to + AP then Softap get connected + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0402 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 20 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 NC +JAP:DISCONNECTED', 'P SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, both bandwidth 20M, SoftAP not get + disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht20, in channel1, ext AP 11n ht20, in channel2 + + 2. AP get connected + + 3. STA connect to ext AP' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, both bandwidth 20M, Softap get connected + than STA connect to AP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0403 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 20 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC1 NC +JAP:DISCONNECTED', 'P SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, SoftAP 20M, STA 40M, STA not disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht20, in channel1, ext AP 11n ht40, in channel2 + + 2. STA connect to ext AP + + 3. AP get connected' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, SoftAP 20M, ext AP 40M, STA connect + to AP then Softap get connected + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0404 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 20 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 NC +JAP:DISCONNECTED', 'P SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, SoftAP 20M, STA 40M, SoftAP not + get disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht20, in channel1, ext AP 11n ht40, in channel2 + + 2. AP get connected + + 3. STA connect to ext AP' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, SoftAP 20M, ext AP 40M, Softap get + connected than STA connect to AP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0405 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 40 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC1 NC +JAP:DISCONNECTED', 'P SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, both bandwidth 40M, STA not disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht40, in channel1, ext AP 11n ht40, in channel2 + + 2. STA connect to ext AP + + 3. AP get connected' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, both bandwidth 40M, STA connect to + AP then Softap get connected + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0406 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 40 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 NC +JAP:DISCONNECTED', 'P SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, both bandwidth 40M, SoftAP not get + disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht40, in channel1, ext AP 11n ht40, in channel2 + + 2. AP get connected + + 3. STA connect to ext AP' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, both bandwidth 40M, Softap get connected + than STA connect to AP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0407 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 40 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC1 NC +JAP:DISCONNECTED', 'P SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, SoftAP 40M, STA 20M, STA not disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht40, in channel1, ext AP 11n ht20, in channel2 + + 2. STA connect to ext AP + + 3. AP get connected' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, SoftAP 40M, ext AP 20M, STA connect + to AP then Softap get connected + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0408 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 phy -S -o 1 -m n -b 40 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 NC +JAP:DISCONNECTED', 'P SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: 3. SoftAP and STA in channel2, SoftAP 40M, STA 20M, SoftAP not + get disconnected + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. SoftAP 11n ht40, in channel1, ext AP 11n ht20, in channel2 + + 2. AP get connected + + 3. STA connect to ext AP' + sub module: Phy Mode + summary: SoftAP ext AP in defferent channel, SoftAP 40M, ext AP 20M, Softap get + connected than STA connect to AP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP initial channel test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0501 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2 20M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA and SoftAP set to 20M + + 2. target 2 STA connect to ap_channel1_20 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_20' + sub module: Phy Mode + summary: SoftAP STA in channel1 20M, STA changed to channel2 20M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0502 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2; SoftAP in 20M, STA in 40M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA set to 40M, SoftAP set to 20M + + 2. target 2 STA connect to ap_channel1_20 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_40' + sub module: Phy Mode + summary: SoftAP STA in channel1 20M, STA changed to channel2 40M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0503 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2 20M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA set to 40M, SoftAP set to 20M + + 2. target 2 STA connect to ap_channel1_40 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_20' + sub module: Phy Mode + summary: SoftAP STA in channel1, SoftAP 20M, STA 40M, STA changed to channel2 20M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0504 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2 20M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA and SoftAP set to 40M + + 2. target 2 STA connect to ap_channel1_40 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_20' + sub module: Phy Mode + summary: SoftAP STA in channel1, SoftAP 20M, STA 40M, STA changed to channel2 40M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0505 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2; SoftAP in 20M, STA in 40M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA set to 40M ,SoftAP set to 20M + + 2. target 2 STA connect to ap_channel1_40 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_20' + sub module: Phy Mode + summary: SoftAP STA in channel1, SoftAP 40M, STA 40M, STA changed to channel2 20M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_PHY_0506 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 phy -S -o 2 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC3 sta -C -s -p + - ['R SSC3 C +JAP:CONNECTED'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - ['P SSC2 C +JAP:CONNECTED', 'P SSC[1,3] NC +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: 4. all STA not get disconnected; target 1 SoftAP and STA both in + channel2 40M + initial condition: T3_PHY1 + initial condition description (auto): '1. target 1 and target 2 set to AP+STA mode, + target 3 set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + level: Integration + module: WIFI MAC + steps: '1. target 1 STA and SoftAP set to 40M + + 2. target 2 STA connect to ap_channel1_40 + + 3. target 1/3 STA connect to target 2/1 SoftAP + + 4. target 2 STA connect to ap_channel2_40' + sub module: Phy Mode + summary: SoftAP STA in channel1, SoftAP 40M, STA 40M, STA changed to channel2 40M + test environment: SSC_T3_PhyMode + test environment description (auto): '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: STA+SoftAP dynamic channel switch test + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -S -s .,juhg123 + - ['R SSC2 NC +SCAN: C +SCANDONE'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -s + - ['R SSC2 C +SCAN:', R SSC2 P , 'R SSC2 NC +SCAN: C +SCANDONE'] + comment: '' + execution time: 0.0 + expected result: '1.target 2上不能scan .,juhg123 + + 2.target1 set AP + + 3.target2上查询到' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target 2 scan .,juhg123 + + 2.target1下设置ssid 和pwd 加密方式 + + 3.target2 scan ' + sub module: WIFI Scan + summary: scan with scan config ssid + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -S -b ff:ff:ff:ff:ff:11 + - ['R SSC2 NC +SCAN: C +SCANDONE'] + - - SSC SSC2 sta -S -b + - ['R SSC2 RE "\+SCAN:.+,%%s"%%()', 'R SSC2 NC +SCAN: C +SCANDONE'] + comment: '' + execution time: 0.0 + expected result: '1.target2 上不能查询到此mac + + 2.target2上查询到' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target2 上查询此macff:ff:ff:ff:ff:11 + + 2.target2上查询' + sub module: WIFI Scan + summary: scan with scan config bssid + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -n 6 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -n 5 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -n 6 + - ['R SSC2 C +SCAN:', R SSC2 P ] + comment: '' + execution time: 0.0 + expected result: '1.target1 QAP + + 2. target1 set AP,set channel 6 + + 3.target2 上scan不到 channel 5 + + 4.target2 上查询channel 6的' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1 断开连接AP + + 2.target1下设置ssid 和pwd 加密方式,set channel 6 + + 3.target2 上scan channel 5 + + 4.target2 上查询channel 6的' + sub module: WIFI Scan + summary: scan with scan config channel + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 P C +SCANDONE] + - - SSC SSC2 sta -S -h 1 + - [R SSC2 P C +SCANDONE] + - - SSC SSC1 ap -S -s -p 123456789 -h 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -h 1 + - [R SSC2 P C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP,set ssid broad cast + + 2.target 2上scan + + 3.target 2上scan + + 4.target1 set AP,set ssid hidden, + + 5.target 2上不能查询到 + + 6.target 2上查询到' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式,set ssid broad cast + + 2.target 2上scan + + 3.target 2上scan + + 4.target1下设置ssid 和pwd 加密方式,set ssid hidden, + + 5.target 2上查询 + + 6.target 2上查询' + sub module: WIFI Scan + summary: scan with scan config show hidden + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 -n 11 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -s -b -n 11 + - [R SSC2 P C +SCANDONE] + - - SSC SSC2 sta -S -s -b -n 11 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -s -b ff:ff:ff:ff:ff:11 -n 11 + - [R SSC2 P , R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -s -b -n 10 + - [R SSC2 P , R SSC2 NP C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 QAP + + 2. target1 set AP,set ssid broad cast,set channel 11 + + 3.target2 上查询到 + + 4.target2 上查询不到 + + 5.target2 上查询不到 + + 6.target2 上查询不到' + initial condition: T2_1 + initial condition description (auto): target 1 as SoftAP, target 2 as STA, will + autogen a TC with initial condition T2_2 + level: Integration + module: WIFI MAC + steps: '1.target1 QAP + + 2. target1 set AP,set ssid broad cast,set channel 11 + + 3.target2 上查询到 + + 4.target2 上查询不到 + + 5.target2 上查询不到 + + 6.target2 上查询不到' + sub module: WIFI Scan + summary: scan with several configs + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0201 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 phy -S -o 1 -m b + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 sta -S + - [R SSC1 P P P P ] + - - SSC SSC1 phy -S -o 1 -m g + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 sta -S + - [R SSC1 P P P P ] + - - SSC SSC1 phy -S -o 1 -m n -b 20 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 sta -S + - [R SSC1 P P P P ] + - - SSC SSC1 phy -S -o 1 -m n -b 40 + - ['R SSC1 C +PHY:OK'] + - - SSC SSC1 sta -S + - [R SSC1 P P P P ] + comment: '' + execution time: 0.0 + expected result: '3. find all 3 ext APs + + 5. find all 3 ext APs + + 7. find all 3 ext APs + + 9. find all 3 ext APs' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: '1. 3 ext APs in 11b, 11g, 11n mode + + 2. STA in 11b mode + + 3. do all channel scan + + 4. STA in 11g mode + + 5. do all channel scan + + 6. STA in 11n ht20 mode + + 7. do all channel scan + + 8. STA in 11n ht40 mode + + 9. do all channel scan' + sub module: WIFI Scan + summary: STA in differnt PHY mode to scan AP in different PHY mode + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: basic function + test point 2: Scan in different mode and channel + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0301 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -S + - [''] + - - SSC SSC1 sta -S + - [P SSC1 C +SCANFAIL, 'P SSC1 P +SCAN:', R SSC1 C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1. second scan failed + + 2. first scan succeed' + initial condition: STAM1 + initial condition description (auto): sta mode, quit AP, DHCP on, will autogen a + TC with initial condition STAAP1 + level: Integration + module: WIFI MAC + steps: '1. do all channel scan + + 2. do scan before scan finished' + sub module: WIFI Scan + summary: reject scan request before scan finished + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: interaction + test point 2: Scan interact with other WiFi operation + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0302 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -n 1000000 -j 5 + - [''] + - - SSC SSC2 phy -S -o 1 -m b + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -S -n + - [R SSC2 P ] + - - SSC SSC2 phy -S -o 1 -m g + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -S -n + - [R SSC2 P ] + - - SSC SSC2 phy -S -o 1 -m n -b 20 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -S -n + - [R SSC2 P ] + - - SSC SSC2 phy -S -o 1 -m n -b 40 + - ['R SSC2 C +PHY:OK'] + - - SSC SSC2 sta -S -n + - [R SSC2 P ] + comment: '' + execution time: 0.0 + expected result: 3. target 2 able to scan AP + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. target 1 connect to AP + + 2. target 1 start sending UDP packets + + 3. target 2 scan in AP channel in 11b.g,n,ht40 mode' + sub module: WIFI Scan + summary: scan in congest channel + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: interaction + test point 2: Scan interact with other WiFi operation + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0303 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:OK'] + - - SSC SSC1 sta -S + - [P SSC1 C +SCANDONE, 'P SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:OK'] + - - SSC SSC1 sta -S + - [''] + - - SSC SSC1 sta -C -s -p + - [P SSC1 C +SCANDONE, 'P SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '2. scan succeed, JAP succeed + + 5. JAP succeed, scan succeed' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. target 1 STA join AP + + 2. target 1 STA scan before JAP succeed + + 3. target 1 quite AP + + 4. target 1 scan + + 5. target 1 JAP before scan succeed' + sub module: WIFI Scan + summary: scan during JAP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: interaction + test point 2: Scan interact with other WiFi operation + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: WIFI_SCAN_0304 + SDK: ESP32_IDF + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:OK'] + - - SSC SSC1 sta -S + - [P SSC1 C +SCANDONE, 'P SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC1 sta -S + - [''] + - - SSC SSC2 sta -C -s -p + - [P SSC1 C +SCANDONE, 'P SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '2. scan succeed, JAP succeed + + 5. JAP succeed, scan succeed' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. target 2 STA join target 1 SoftAP + + 2. target 1 STA scan before target 2 JAP succeed + + 3. target 2 STA QAP + + 4. target 1 STA scan + + 5. target 2 STA JAP before target 1 STA scan succeed' + sub module: WIFI Scan + summary: scan during ext STA join SoftAP + test environment: SSC_T2_PhyMode + test environment description (auto): '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.' + test point 1: interaction + test point 2: Scan interact with other WiFi operation + version: v1 (2015-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -i 0.0.0.0 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -Q + - ['R SSC1 C +STAIP:0.0.0.0'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 ip -Q + - ['R SSC1 RE "\+STAIP:%%s"%%()'] + comment: '' + execution time: 0.0 + expected result: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n\ + 4.target1 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: TCPIP + steps: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1\ + \ 打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip" + sub module: DHCP + summary: dhcp client function test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 20 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target\ + \ 1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n\ + 4.target1 打开DHCP OK\n5.target2 jap target 1,ok" + sub module: DHCP + summary: dhcp server function test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 3 + - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] + - - SSC SSC1 dhcp -Q -o 3 + - ['R SSC1 C +DHCP:STA,STARTED C +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED NC +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 NC +DHCP:STA,STARTED C +DHCP:AP,STARTED'] + - - SSC SSC1 dhcp -E -o 3 + - ['R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK'] + - - SSC SSC1 dhcp -Q -o 3 + - ['R SSC1 C +DHCP:STA,STOPPED C +DHCP:AP,STOPPED'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.STA&AP STARTED + + 4.STA STARTED + + 5.AP STARTED + + 6.OK + + 7.STA&AP STOPPED' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: TCPIP + steps: '1.target1 设置mode 为sta+softAP mode + + 2.target1 打开DHCP 3 + + 3.target1 查询DHCP 状态 + + 4.target1 查询sta DHCP 状态 + + 5.target1 查询softAP DHCP 状态 + + 6.target1 关闭 DHCP 3 + + 7.target1 查询 DHCP 状态' + sub module: DHCP + summary: dhcp status query + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP client function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.1 -e 192.168.4.10 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.4.5 -e 192.168.4.2 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.5 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + comment: '' + execution time: 0.0 + expected result: '1.target1 关闭DHCP 2 OK + + 2.target1 设置ip 成功 + + 3.设置dhcp 地址池 OK + + 4.ERROR + + 5.ERROR + + 6.ERROR + + 7.target1 打开DHCP ok' + initial condition: APSTA1 + initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) + level: Integration + module: TCPIP + steps: "1.target1 关闭DHCP 2 \n2.target1 设置ip \n3.设置dhcp 地址池\n4.设置dhcp错误的参数\n5.设置dhcp错误的参数\n\ + 6.设置dhcp错误的参数\n7.target1 打开DHCP ok" + sub module: DHCP + summary: server dhcp lease test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 3 4 "['01','02','03']" "[2,3,4]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3,4: get IP from dhcp pool with correct sequence' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP Server on Target1 + + 3. target change mac, connect to Target1 + + 4. Loop step3' + sub module: DHCP + summary: dhcp server ip pool + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 2 4 "['01','02']" "[2,3]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - DELAY 20 + - [''] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:0.0.0.0'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4.1 succeed + + 4.2 failed' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP Server on Target1(.4.2 - .4.3) + + 3. target change mac, connect to Target1 + + 4. Loop step3 twice' + sub module: DHCP + summary: dhcp server ip pool empty + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + - - DELAY 90 + - [''] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + - - SSC SSC2 sta -D + - ['R SSC2 C +JAP:DISCONNECTED'] + - - DELAY 60 + - [''] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. get IP 192.168.4.2 + + 5. succeed + + 6. succeed + + 8. get IP 192.168.4.2' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. config DHCP timeout as 1 minute + + 3. target2 connect to target1 + + 4. wait 90 seconds + + 5. check if target2 IP is same + + 6. target2 disconnect + + 7. wait 60s + + 8. target2 change mac and connect to target1' + sub module: DHCP + summary: dhcp server timeout test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0205 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1 + - ['P SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. target2 wifi disconnected' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 + + 3. disable DHCP server, do config and enable' + sub module: DHCP + summary: disconnect STA if config dhcp server + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0206 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - LOOP 4 4 "['01','02','03','01']" "[2,3,4,2]" + - [''] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s} + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.{%s}'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 4. get IP 192.168.4.2 - 192.168.4.4 + + 5. get IP 192.168.4.2' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. disable DHCP server, do config and enable + + 3. target2 change mac, connect to softap, disconnect + + 4. Loop step3 twice + + 5. change to first mac, connect to softap' + sub module: DHCP + summary: dhcp server assign same IP to same MAC when it's not released + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0207 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - WIFI DISCONN2 + - ['R PC_COM NC ERROR C +WIFIDISCONN:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 ip -Q -o 1 + - ['R SSC2 C +STAIP:192.168.4.2'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. get IP 192.168.4.2 + + 4. succeed + + 5. succeed + + 6. get IP 192.168.4.2' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. disable DHCP server, do config and enable + + 3. PC WIFI NIC connect to target1 softap + + 4. target2 connect to target1 softap and disnnect + + 5. PC release IP and disconnected + + 6. target2 change mac and connect to target1' + sub module: DHCP + summary: dhcp server prefer assign released IP to new client + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0208 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['P SSC1 C +DHCP:AP,OK', 'P SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC2 sta -D + - ['R SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. get IP 192.168.4.2 + + 5. can only find target2 with IP 192.168.4.2' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. PC NIC connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. target2 connect to target1 softap + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig and new client able to get first IP in pool + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0209 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - DELAY 20 + - [''] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client and new client able to get IP + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0210 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - WIFI CONN2 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client able to get IP (discover with requested + IP) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0211 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN 192.168.4.2 + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - DELAY 10 + - [''] + - - SSC SSC1 ap -L + - [R SSC1 C 192.168.4.2 C 192.168.4.3 P P ] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. succeed + + 5. find target2 and PC' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. config softap to a random ssid + + 2. target2 connect to target1 softap + + 3. disable DHCP server, do config and enable + + 4. PC NIC connect to target1 softap try to renew IP 192.168.4.2 + + 5. softap list connected station' + sub module: DHCP + summary: dhcp server reconfig, old client able to renew IP (direct send request) + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DHCP server function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -i 192.168.123.123 -o 1 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 ip -S -i 0.0.0.0 -o 1 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 sta -C -s -p + - [''] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC1 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.JAP CONNETED + + 4.OK + + 5.等待10s，JAP fail' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: TCPIP + steps: '1.target1 关闭DHCP 1 + + 2.target1 设置sta ip 192.168.123.123 + + 4.target1 jap AP + + 5.target1 设置sta ip 0.0.0.0 + + 6.target1 jap AP' + sub module: DHCP + summary: sta dhcp static ip interaction + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: interaction + test point 2: static IP and DHCP interaction test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DHCP_0302 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -i 192.168.123.123 -o 2 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.10 + - ['R SSC1 C +DHCP:LEASE,ERROR'] + - - SSC SSC1 ap -S -s -p -t + - [''] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -i 192.168.4.1 -o 2 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.10 + - ['R SSC1 C +DHCP:LEASE,OK'] + - - SSC SSC2 sta -C -s -p + - [''] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target 1 OK + + 2.target1 ERROR + + 3.target1 ERROR + + 4.target2 jap target1 OK + + 5.target1 OK + + 6.target1 OK + + 7.target1 OK + + 8.target2 jap target1 OK' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n3.target1 设置地址池\n\ + 4.target1下设置ssid 和pwd 加密方式\n5.target2 连接target1 \n6.target1 关闭DHCP 2\n7.target1\ + \ 设置softAP ip \n8.target1 设置正确的地址池\n9.target2 连接target1" + sub module: DHCP + summary: ap dhcp static ip interaction + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: interaction + test point 2: static IP and DHCP interaction test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DNS_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 C +HOSTIP:OK,115.29.202.58'] + comment: '' + execution time: 0.0 + expected result: 1.OK + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: 1. get host name "espressif.cn" + sub module: DNS + summary: get host by name test + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DNS_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p 9001 + - ['R SSC1 RE \+CONNECT:\d+,OK'] + - - SSC SSC1 soc -S -s -l 10 + - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. get host name "espressif.cn" + + 2. connect, send, recv1. get host name "espressif.cn" + + 2. connect, send, recv' + sub module: DNS + summary: TCP connect to iot.espressif.com + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_DNS_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 3/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -H -d iot.espressif.cn + - ['R SSC1 A :\+HOSTIP:OK,(.+)\r\n'] + - - SSC SSC1 soc -B -t UDP + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p 9003 -l 10 + - ['P SSC1 RE \+SEND:\d+,OK', P SSC1 SL +10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. get host name "espressif.cn" + + 2. sendto, recvfrom1. get host name "espressif.cn" + + 2. sendto, recvfrom' + sub module: DNS + summary: UDP send to iot.expressif.com + test environment: SSC_T1_2 + test environment description (auto): 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: DNS function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_ICMP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ping -i + - ['R SSC1 C +PING:OK'] + - - SSC SSC1 ping -i -c 2 + - ['R SSC1 C +PING:OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.ping -i + + 2.ping -i -c 2' + sub module: ICMP + summary: ping function test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: ping function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -J -h -m 223.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. join group with correct host addr and wrong multicast addr + + 3. join group with wrong host addr and correct multicast addr + + 4. join group with wrong host addr and wrong multicast addr' + sub module: IGMP + summary: station IGMP join group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.2 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed + + 5. succeed' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. leave group with correct host addr and wrong multicast addr + + 3. leave group with wrong host addr and correct multicast addr + + 4. leave group with wrong host addr and wrong multicast addr + + 5. leave group with correct host addr and correct multicast addr' + sub module: IGMP + summary: station IGMP leave group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -J -h -m 223.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -J -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. join group with correct host addr and wrong multicast addr + + 3. join group with wrong host addr and correct multicast addr + + 4. join group with wrong host addr and wrong multicast addr' + sub module: IGMP + summary: softAP IGMP join group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 igmp -L -h -m 224.1.1.2 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 224.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h 192.168.237.77 -m 240.1.1.1 + - ['R SSC1 C +IGMP:ERROR'] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. success + + 2. failed + + 3. failed + + 4. failed + + 5. succeed' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. join group with correct host addr and multicast addr + + 2. leave group with correct host addr and wrong multicast addr + + 3. leave group with wrong host addr and correct multicast addr + + 4. leave group with wrong host addr and wrong multicast addr + + 5. leave group with correct host addr and correct multicast addr' + sub module: IGMP + summary: softAP IGMP leave group address check + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP API parameter check + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC1 SENDTO 1 224.1.1.1 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. able to recv packet' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. join group + + 2. create UDP socket using multicast addr + + 3. PC send UDP packet to multicast addr' + sub module: IGMP + summary: station IGMP recv packets + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. target1 recv multicast packet' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. target2 set to sta mode and join AP + + 2. target1 join group and create UDP socket using multicast addr + + 3. target2 create UDP socket + + 4. target2 send to multicast addr' + sub module: IGMP + summary: station send multicast packets + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC1 SENDTO 1 224.1.1.1 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. able to recv packet' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. join group + + 2. create UDP socket using multicast addr + + 3. PC send UDP packet to multicast addr' + sub module: IGMP + summary: softAP IGMP recv packets + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IGMP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 igmp -J -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + - - SSC SSC1 soc -B -t UDP -i 224.1.1.1 -p + - ['R SSC1 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -B -t UDP -p + - ['R SSC2 A :\+BIND:(\d+),OK'] + - - SSC SSC2 soc -S -s -i 224.1.1.1 -p -l 10 + - [R SSC1 SL +1] + - - SSC SSC1 igmp -L -h -m 224.1.1.1 + - ['R SSC1 C +IGMP:OK'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. succeed + + 4. target1 recv multicast packet' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: TCPIP + steps: '1. target2 join SoftAP + + 2. target1 join group and create UDP socket using multicast addr + + 3. target2 create UDP socket + + 4. target2 send to multicast addr' + sub module: IGMP + summary: softAP send multicast packets + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: IGMP send/recv test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.123.123 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.123.123'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ERROR + + 3.OK + + 4.OK + + 5.STAIP:192.168.123.123' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: TCPIP + steps: '1.target1 打开DHCP 1 + + 2.target1 设置sta ip 192.168.123.123 + + 4.target1 关闭DHCP 1 + + 5.target1 设置sta ip 192.168.123.123 + + 6.target1 查询 当前sta ip' + sub module: IP + summary: sta set and query static ip test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: set and query static IP + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_IP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 dhcp -S -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 + - ['R SSC1 C +IP:ERROR'] + - - SSC SSC1 dhcp -E -o 2 + - ['R SSC1 C +DHCP:AP,OK'] + - - SSC SSC1 ip -S -o 2 -i 192.168.123.123 + - ['R SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 2 + - ['R SSC1 C +APIP:192.168.123.123'] + - - SSC SSC1 ip -S -o 2 -i + - ['R SSC1 C +IP:OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ERROR + + 3.OK + + 4.OK + + 5.APIP:192.168.123.123 + + 6.OK' + initial condition: APSTA1 + initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) + level: Integration + module: TCPIP + steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n4.target1 关闭DHCP\ + \ 2\n5.target1 设置softAP ip 192.168.123.123\n6.target1 查询 当前sta ip \n7.target1\ + \ 设置softAP ip 为target_ap_ip" + sub module: IP + summary: ap set and query static ip test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: set and query static IP + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i 123.456.678.789 -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.ERROR + + 6.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 + + 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' + sub module: TCP + summary: STA mode, connect test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC1 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] + - - SOC SOC1 CONNECT + - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.PC TCP client accept + + 4.error' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.target1上创建TCP socket，bind到本地端口 + + 2.target1上使用步骤1创建的socket,创建TCP 监听 + + 3.PC TCP 连接到target1 , + + 4.PC tcp 连接到不存在的port ,' + sub module: TCP + summary: STA mode, server listen test. use different kinds of port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SOC SOC2 SEND 5 + - [R SSC1 SL +5] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] + - - SOC SOC2 SEND 146000 + - [R SSC1 SL +146000] + - - SSC SSC1 soc -S -s -l 1460 -n 100 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc上回accept + + 4.OK + + 5.target收到5 byte + + 6.PC收到5 byte + + 7.target收到 146000 byte + + 8.OK,PC 回SOC_RECV=SOC2,RECV_LEN=字节数' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.PC send 5 bytes to 8266 + + 6.8266 send 5 bytes to PC + + 7. PC send 100 * 1460 data to 8266, + + 8.8266 send 100 * 1460 to PC.' + sub module: TCP + summary: STA mode, send/recv basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h W + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h R + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept OK + + 4.OK + + 5.OK + + 6.OK,pc tcp server accept OK + + 7.OK + + 8.OK + + 9.OK,pc tcp server accept OK + + 10.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1 shutdown socket1 B + + 5.target1上创建TCP socket + + 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 7.target1 shutdown socket2 W + + 8.target1上创建TCP socket + + 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1 shutdown socket3 R' + sub module: TCP + summary: STA mode, shutdown basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK + + 6.OK + + 7.target1关闭socket1 + + 8.target1关闭socket2 + + 9.OK + + 10.OK,pc tcp server accept成功 + + 11.target1关闭socket1 + + 12.OK + + 13.OK,pc tcp server accept成功 + + 14.OK + + 15.target1关闭socket1' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ + 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ + 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ + 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" + sub module: TCP + summary: STA mode, close for different types of TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0106 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4 OK + + 5.OK,pc tcp server accept成功 + + 6.OK + + 7.OK,pc tcp server accept成功 + + 8 OK + + 9.OK,pc tcp server accept成功 + + 10.OK + + 11.OK,pc tcp server accept成功' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 6.target1上创建TCP socket3 + + 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 8.target1上创建TCP socket4 + + 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1上创建TCP socket5 + + 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' + sub module: TCP + summary: STA mode, create max TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0107 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC3 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC4 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC5 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC6 CONNECT + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + comment: '' + execution time: 0.0 + expected result: '1.+BIND:0，OK,0.0.0.0 + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK,pc tcp server accept成功 + + 5.OK,pc tcp server accept成功 + + 6.OK,pc tcp server accept成功 + + 7.OK,pc tcp server accept成功' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ + \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6" + sub module: TCP + summary: STA mode, accept max TCP client by server test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0110 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK', P SOC1 C +ACCEPT] + - - SSC SSC1 soc -B -t TCP -i 0.0.0.0 -p 0 + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i 123.456.678.789 -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.ERROR + + 6.ERROR' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.target1上创建TCP socket，bind到本地ip 0.0.0.0,本地端口 0 + + 5.target1上使用步骤4创建的socket,去连接不存在的ip，test_tcp_port1 + + 6.target1上使用步骤2创建的socket，去连接 PC的ip，远端端口不存在。' + sub module: TCP + summary: AP mode, connect test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0111 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC1 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+', P SOC_COM C OK] + - - SOC SOC1 CONNECT 0 + - [P SOC_COM C ERROR, P SSC1 NC ACCEPT] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.PC TCP client accept + + 4.error' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.target1上创建TCP socket，bind到本地端口 + + 2.target1上使用步骤1创建的socket,创建TCP 监听 + + 3.PC TCP 连接到target1 , + + 4.PC tcp 连接到不存在的port ,' + sub module: TCP + summary: AP mode, server listen test. use different kinds of port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0112 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SOC SOC2 SEND 5 + - [R SSC1 SL +5] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 5] + - - SOC SOC2 SEND 146000 + - [R SSC1 SL +146000] + - - SSC SSC1 soc -S -s -l 1460 -n 100 + - ['P SSC1 RE SEND:\d+,OK', P SOC2 RL 146000] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.target收到5byte数据 + + 6.PC收到5byte数据 + + 7.target收到146000 byte数据 + + 8.OK,PC 收到146000 byte数据' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.PC send 5 bytes to 8266 + + 6.8266 send 5 bytes to PC + + 7. PC send 100 * 1460 data to 8266, + + 8.8266 send 100 * 1460 to PC.' + sub module: TCP + summary: AP mode, send/recv basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0113 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h W + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h R + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK,pc tcp server accept成功 + + 7.OK + + 8.OK + + 9.OK,pc tcp server accept成功 + + 10.OK' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1 shutdown socket1 B + + 5.target1上创建TCP socket + + 6.target1上使用步骤5创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 7.target1 shutdown socket2 W + + 8.target1上创建TCP socket + + 9.target1上使用步骤8创建的socket，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1 shutdown socket3 R' + sub module: TCP + summary: AP mode, shutdown basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0114 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK + + 6.OK,target1上accept 成功 + + 7.target1关闭socket1 + + 8.target1关闭socket2 + + 9.OK + + 10.OK,pc tcp server accept成功 + + 11.target1关闭socket1 + + 12.OK + + 13.OK,pc tcp server accept成功 + + 14.OK + + 15.target1关闭socket1' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1关闭socket1\n\ + 4.target1上创建TCP socket 端口随机\n5.target1上使用步骤4创建的socket1，去监听\n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n7.target1关闭socket1\n8.target1关闭socket2\n\ + 9.target1上创建TCP socket1\n10.target1上使用步骤10创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT\n\ + 11.target1关闭socket1\n12.target1上创建TCP socket1\n13.target1上使用步骤13创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n14.target1shutdown socket1\n15.target1关闭socket1" + sub module: TCP + summary: AP mode, close for different types of TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0115 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4 OK + + 5.OK,pc tcp server accept成功 + + 6.OK + + 7.OK,pc tcp server accept成功 + + 8 OK + + 9.OK,pc tcp server accept成功 + + 10.OK + + 11.OK,pc tcp server accept成功' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 6.target1上创建TCP socket3 + + 7.target1上使用步骤6创建的socket3，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 8.target1上创建TCP socket4 + + 9.target1上使用步骤8创建的socket4，去连接 PC的ip，test_tcp_port1,PC有ACCEPT + + 10.target1上创建TCP socket5 + + 11.target1上使用步骤10创建的socket5，去连接 PC的ip，test_tcp_port1,PC有ACCEPT' + sub module: TCP + summary: AP mode, create max TCP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0116 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC3 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC4 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC5 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + - - SOC SOC6 CONNECT 0 + - ['R SSC1 RE ACCEPT:(\d+),\d+,.+,\d+'] + comment: '' + execution time: 0.0 + expected result: '1.+BIND:0，OK,0.0.0.0 + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK,pc tcp server accept成功 + + 5.OK,pc tcp server accept成功 + + 6.OK,pc tcp server accept成功 + + 7.OK,pc tcp server accept成功' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: "1.target1上创建TCP socket 端口随机\n2.target1上使用步骤4创建的socket1，去监听\n3.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket2 \n4.PC CONNECT, ,tcp 连接创建成功，创建socket3\ + \ \n5.PC CONNECT, ,tcp 连接创建成功，创建socket4 \n6.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket5 \n7.PC CONNECT, ,tcp 连接创建成功，创建socket6" + sub module: TCP + summary: AP mode, accept max TCP client by server test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['P SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.OK + + 9.OK + + 10.OK + + 11.OK + + 12.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去连接 PC的ip， + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket,创建TCP 监听 + + 6.target1上使用步骤4创建的socket，去连接 PC的ip， + + 7.target1上创建TCP socket + + 8.target1上使用步骤7创建的socket，去连接 PC的ip， + + 9.target1上关闭步骤7创建的socket + + 10.target1上使用步骤7创建的socket，去连接 PC的ip， + + 11.target1上关闭所有创建的socket + + 12.target1上使用步骤2创建的socket，去连接 PC的ip，' + sub module: TCP + summary: STA mode, connect test. use socket in state that can't connect + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -L -s 1000 + - ['R SSC1 RE LISTEN:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去建立TCP 监听 + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket，去连接 PC的ip， + + 6.target1上使用步骤4创建的socket,创建TCP 监听 + + 7.target1上shutdown 步骤4的socket + + 8.target1上使用步骤4创建的socket,创建TCP 监听 + + 9.target1上使用不存在socket,创建TCP 监听' + sub module: TCP + summary: STA mode, server listen test. use socket in state that can't listen + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0203 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -S -s + - ['R SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -S -s 1000 + - ['R SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK + + 5.ERROR + + 6.OK + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket1， + + 3.target1上使用步骤2创建的socket1，去发送数据 + + 4.target1上创建TCP socket2 + + 5.target1上使用步骤4创建的socket2，去发送数据 + + 6.target1上使用步骤4创建的socket2,创建TCP连接，连接成功 + + 7.target1上shutdown 步骤4的socket2 + + 8.target1往socket2发送错误命令发送数据 + + 9.target1上不指定socket往上发送数据' + sub module: TCP + summary: send test. use socket in state that can't send + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0204 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC2 SEND 146000 + - [P SOC_COM R *] + - - SSC SSC1 soc -W -s -o 1 + - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc server accept OK + + 4.OK + + 5.OK + + 6.OK + + 7.target收到146000 byte' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.target上不进行recv + + 6.PC send 100 * 1460 data to target, + + 7.在target上开始recv' + sub module: TCP + summary: STA mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0206 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK + + 9.PC OK, target1 +ACCEPT:3,2,,port + + 10.+SOCINFO:,,, + + +SOCINFO:,,, + + +SOCINFO:, + + +SOCINFO:,,, + + +SOCINF0ALL' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ + \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" + sub module: TCP + summary: STA mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0207 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [SOCR SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s -h B + - ['P SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 soc -C -s -i -p + - ['P SSC1 RE CONNECT:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2 OK + + 3.ERROR + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.OK + + 9.OK + + 10.OK + + 11.OK + + 12.ERROR' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去连接 PC的ip， + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket,创建TCP 监听 + + 6.target1上使用步骤4创建的socket，去连接 PC的ip， + + 7.target1上创建TCP socket + + 8.target1上使用步骤7创建的socket，去连接 PC的ip， + + 9.target1上关闭步骤7创建的socket + + 10.target1上使用步骤7创建的socket，去连接 PC的ip， + + 11.target1上关闭所有创建的socket + + 12.target1上使用步骤2创建的socket，去连接 PC的ip，' + sub module: TCP + summary: AP mode, connect test. use socket in state that can't connect + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0208 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,ERROR'] + - - SSC SSC1 soc -L -s 1000 + - ['R SSC1 RE LISTEN:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4 OK + + 5.OK + + 6.ERROR + + 7.OK + + 8.ERROR + + 9.ERROR' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建UDP传输socket，bind到本地ip 0.0.0.0, + + 3.target1上使用步骤2创建的socket，去建立TCP 监听 + + 4.target1上创建TCP socket + + 5.target1上使用步骤4创建的socket，去连接 PC的ip， + + 6.target1上使用步骤4创建的socket,创建TCP 监听 + + 7.target1上shutdown 步骤4的socket + + 8.target1上使用步骤4创建的socket,创建TCP 监听 + + 9.target1上使用不存在socket,创建TCP 监听' + sub module: TCP + summary: AP mode, server listen test. use socket in state that can't listen + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0210 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC2 SEND 146000 + - [P SOC_COM R *] + - - SSC SSC1 soc -W -s -o 1 + - ['P SSC1 RE WORKTHREAD:\d+,OK', P SSC1 SL +2920] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 6.OK + + 7.收到 146000 数据' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1. PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket + + 3.target1上使用步骤2创建的socket，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1 创建好TCP 连接，有ACCEPT + + 5.target停止调用recv + + 6.PC send 100 * 1460 data to 8266, + + 7.target重新调用recv' + sub module: TCP + summary: AP mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0212 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -i + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SSC SSC1 soc -D -s + - ['R SSC1 RE SHUTDOWN:\d+,OK'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -L -s + - ['R SSC1 RE LISTEN:\d+,OK'] + - - SOC SOC2 CONNECT 0 + - ['R SSC1 A :ACCEPT:(\d+),\d+,.+,\d+'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,2,%%s,\d+,%%s,%%d"%%(,,,)', + 'P SSC1 RE "SOCINFO:%%s,2,.+,\d+,.+,\d+"%%()', 'P SSC1 RE "SOCINFO:%%s,82,.+,%%d,.+,\d+"%%(,)', + 'P SSC1 RE "SOCINFO:%%s,2,%%s,%%d,%%s,\d+"%%(,,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK,pc tcp server accept成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK + + 9.PC OK, target1 +ACCEPT:3,2,,port + + 10.+SOCINFO:,,, + + +SOCINFO:,,, + + +SOCINFO:, + + +SOCINFO:,,, + + +SOCINF0ALL' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1,本地ip target_ip\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n4.target1上创建TCP socket2,本地ip target_ip\n5.target1上使用步骤4创建的socket2，去连接\ + \ PC的ip，test_tcp_port1,PC有ACCEPT\n6.target1 shutdown socket2 \n7.target1上创建TCP\ + \ socket3,本地端口random_port\n8.target1上使用步骤7创建的socket3，去监听\n9.PC CONNECT,\ + \ ,tcp 连接创建成功，创建socket4 \n10.target1 查询the socket information" + sub module: TCP + summary: AP mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use TCP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0401 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.断开与AP 连接 + + 6.8266往PC上发送5字节数据' + sub module: TCP + summary: do TCP send after WIFI disconnected + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0402 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.断开与AP 连接 + + 6.关闭建立的socket1连接' + sub module: TCP + summary: "close TCP socket after WIFI \ndisconnected" + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0403 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ + \ \n6.8266往PC上发送5字节数据" + sub module: TCP + summary: do TCP send after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0404 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.修改8266的Mode为softAP mode\ + \ \n6.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0405 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -S -s -l 1 + - [''] + - - DELAY 5400 + - ['P SSC1 RE CLOSED:\d+,0'] + comment: '' + execution time: 1.5 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.TCP连接断开' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.PC 网卡 disable + + 6.target1上使用socket1发送数据，等待 90 分钟' + sub module: TCP + summary: do TCP send after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0406 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.PC上网卡禁止掉 \n6.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0407 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ + \ ip \n7.查询sta ip 地址是否生效\n8.8266往PC上发送5字节数据" + sub module: TCP + summary: do TCP send after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0408 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK', 'P SSC1 RE CLOSED:\d+,0'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK + + 8.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上建立TCP 监听 test_tcp_port1\n2.target1上创建TCP socket1\n3.target1上使用步骤2创建的socket1，去连接\ + \ PC的ip，test_tcp_port1\n4.PC与target1创建好TCP 连接，有ACCEPT\n5.关闭8266的DHCP 1\n6.设置sta\ + \ ip \n7.查询sta ip 地址是否生效\n8.关闭建立的socket1连接" + sub module: TCP + summary: close TCP socket after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0411 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + - - SSC SSC1 soc -S -s -l 5 + - ['P SSC1 RE SEND:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.ERROR + + 7.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.target1上创建TCP socket2 + + 6.8266往PC socket2上发送5字节数据 + + 7.8266往PC socket1上发送5字节数据' + sub module: TCP + summary: do TCP send after socket changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_TCP_0412 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -C -s -i -p + - ['R SSC1 RE CONNECT:\d+,OK'] + - - SOC SOC1 ACCEPT SOC2 + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t TCP + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上建立TCP 监听 test_tcp_port1 + + 2.target1上创建TCP socket1 + + 3.target1上使用步骤2创建的socket1，去连接 PC的ip，test_tcp_port1 + + 4.PC与target1创建好TCP 连接，有ACCEPT + + 5.target1上创建TCP socket2 + + 6.关闭socket1 连接 + + 7.关闭socket2连接' + sub module: TCP + summary: close TCP send after socket changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: TCP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 C BIND:ERROR'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上创建TCP socket3, target_udp_port1' + sub module: UDP + summary: STA mode, udp bind test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SOC SOC2 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 10 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 10] + - - SSC SSC1 soc -S -s -i -p -l 10 + - ['P SSC1 RE SEND:(\d+),OK', P SOC2 UL 10] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.PC上SOC2 UDP传输，bing + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上使用步骤3创建的socket1，往pc_ip，test_tcp_port1上发送10字节数据 + + 5.target1上使用步骤3创建的socket1，往pc_ip2，test_tcp_port2上发送10字节数据' + sub module: UDP + summary: STA mode, sendto test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] + - - SSC SSC1 soc -S -s -i -p -l 1472 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] + - - SSC SSC1 soc -S -s -i -p -l 1473 + - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] + - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 -j 20 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没有到UDP包 + + 6.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 + + 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 + + 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' + sub module: UDP + summary: STA mode, sendto test with different length + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SOC SOC1 SENDTO 1 + - [R SSC1 SL +1] + - - SOC SOC1 SENDTO 1472 + - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] + - - SOC SOC1 SENDTO 1473 + - [P SSC1 NC +RECVFROM, P SOC_COM C OK] + - - SOC SOC2 BIND + - [R SOC_COM L OK] + - - SOC SOC2 SENDTO 1472 + - ['R SSC1 RE "RECVFROM:%%s,1472,%%s,%%u"%%(,,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没收到UDP包 + + 6.OK + + 7.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.PC往8266上发送1字节数据 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1473字节数据 + + 6.PC上SOC2 UDP传输，bing + + 7.PC往8266上发送1472字节数据' + sub module: UDP + summary: STA mode, recvfrom basic test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.关闭socket1' + sub module: UDP + summary: STA mode, close UDP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0106 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok + + 3.ok + + 4.ok + + 5.ok' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 + + 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 + + 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 + + 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' + sub module: UDP + summary: STA mode, create max udp socket test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0107 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上查询创建socket信息' + sub module: UDP + summary: STA mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0108 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -i 0.0.0.0 -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 C BIND:ERROR'] + - - SSC SSC1 soc -B -t TCP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.ERROR + + 4.OK' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip 0.0.0.0 target_udp_port2 + + 3.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 4.target1上创建TCP socket3, target_udp_port1' + sub module: UDP + summary: AP mode, udp bind test. use different ip, port + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0110 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1] + - - SSC SSC1 soc -S -s -i -p -l 1472 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 1472] + - - SSC SSC1 soc -S -s -i -p -l 1473 + - ['P SSC1 RE SEND:(\d+),OK', P SOC_COM NC SOC_RECVFROM] + - - SSC SSC1 soc -S -s -i -p -l 1472 -n 10 + -j 20 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 14720] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK,没收到UDP包 + + 6.OK' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1字节数据 + + 4.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472字节数据 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1473字节数据 + + 6.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送1472*10字节数据' + sub module: UDP + summary: AP mode, sendto test with different length + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0112 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.关闭socket1' + sub module: UDP + summary: AP mode, close UDP sockets test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0113 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 RE BIND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.ok + + 2.ok + + 3.ok + + 4.ok + + 5.ok' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上UDP传输，Bind socket2,本地ip target_udp_port2 + + 3.target1上UDP传输，Bind socket3,本地ip target_udp_port3 + + 4.target1上UDP传输，Bind socket4,本地ip target_udp_port4 + + 5.target1上UDP传输，Bind socket5,本地ip target_udp_port5' + sub module: UDP + summary: AP mode, create max udp socket test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0114 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -I + - ['P SSC1 RE "SOCINFO:%%s,1,.+,%%d"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 2.target1上查询创建socket信息' + sub module: UDP + summary: AP mode, get active socket info test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: use UDP SAP (socket/espconn API) with different parameter + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.PC OK + + 5.PC OK + + 6.PC OK + + 7.PC OK + + 8.PC OK SOC_CLOSE=SOC1' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上关闭工作线程 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1472字节数据 + + 6.PC往8266上发送1472字节数据 + + 7.PC往8266上发送1472字节数据 + + 8.PC往8266上发送1472字节数据' + sub module: UDP + summary: STA mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: use UDP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0202 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -W -s -o 0 + - ['R SSC1 RE WORKTHREAD:\d+,OK'] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + - - SOC SOC1 SENDTO 1472 + - [''] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.PC OK + + 5.PC OK + + 6.PC OK + + 7.PC OK + + 8.PC OK SOC_CLOSE=SOC1' + initial condition: APSTA2 + initial condition description (auto): testing ap on sta + ap mode, PC join AP (autogen + by APM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上关闭工作线程 + + 4.PC往8266上发送1472字节数据 + + 5.PC往8266上发送1472字节数据 + + 6.PC往8266上发送1472字节数据 + + 7.PC往8266上发送1472字节数据 + + 8.PC往8266上发送1472字节数据' + sub module: UDP + summary: AP mode, recv buffer test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: use UDP SAP (socket/espconn API) in different state + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -i -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:\d+,ERROR'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 + + 4.断开与AP 连接 + + 5.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据' + sub module: UDP + summary: do UDP send after WIFI disconnected + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0302 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 sta -D + - ['P SSC1 C +QAP:OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: '1.PC上SOC1 UDP传输，bing + + 2.target1上UDP传输，Bind socket1,本地ip target_udp_port1 + + 3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据 + + 4.断开与AP 连接 + + 5.关闭建立的socket1连接' + sub module: UDP + summary: "close UDP socket after WIFI \ndisconnected" + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0303 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.ERROR' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.修改8266的Mode为softAP mode \n5.8266往PC上发送5字节数据" + sub module: UDP + summary: do UDP send after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0304 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 op -S -o 2 + - ['P SSC1 C +MODE:OK'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.修改8266的Mode为softAP mode \n5.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after mode changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0305 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - NIC DISABLED + - [R PC_COM C OK] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK + + 4.OK + + 5.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.PC上网卡禁止掉 \n5.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after PC NIC disabled + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0306 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -S -s -i -p -l 1 + - ['P SSC1 RE SEND:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.8266往PC上发送5字节数据" + sub module: UDP + summary: do UDP send after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^TCPIP_UDP_0307 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: 1/5 + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SOC SOC1 BIND + - [R SOC_COM L OK] + - - SSC SSC1 soc -B -t UDP -p + - ['R SSC1 A :BIND:(\d+),OK'] + - - SSC SSC1 soc -S -s -i -p -l 5 + - ['P SSC1 RE SEND:(\d+),OK', P SOC1 UL 5] + - - SSC SSC1 dhcp -E -o 1 + - ['R SSC1 C +DHCP:STA,OK'] + - - SSC SSC1 ip -S -o 1 -i 192.168.111.210 + - ['P SSC1 C +IP:OK'] + - - SSC SSC1 ip -Q -o 1 + - ['R SSC1 C +STAIP:192.168.111.210'] + - - SSC SSC1 soc -T -s + - ['R SSC1 RE CLOSE:\d+,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.OK + + 3.OK; PC TCP server accept 成功 + + 4.OK + + 5.OK + + 6.OK + + 7.OK' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: TCPIP + steps: "1.PC上SOC1 UDP传输，bing \n2.target1上UDP传输，Bind socket1,本地ip\ + \ target_udp_port1\n3.target1上使用步骤2创建的socket1，往pc_ip，test_tcp_port1上发送5字节数据\n\ + 4.关闭8266的DHCP 1\n5.设置sta ip \n6.查询sta ip 地址是否生效\n7.关闭建立的socket1连接" + sub module: UDP + summary: close UDP socket after IP changed + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: UDP handling abnormal event + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_ADDR_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 1 -m 44:55:66:77:88:99 + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 mac -S -o 2 -m 22:33:44:55:66:77 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 mac -Q -o 3 + - ['R SSC1 C +STAMAC:44:55:66:77:88:99 C +APMAC:22:33:44:55:66:77'] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ok + + 3.ok + + 4.ok + + 5.ok + + 6.ok' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: "1.target1 设置mode 为sta+softAP mode\n2.target1 设置sta mode 下的mac \n3.target1\ + \ 设置softAP mode 下的mac\n4.target1 查询softAP+sta 下的mac\n5.target1 设置sta mode 下的mac\ + \ 为target1_mac\n6.target1 设置softAP mode 下的mac 为target1_ap_mac" + sub module: MAC Address + summary: set mac, query mac + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: mac address function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_ADDR_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 mac -S -o 2 -m 44:55:66:77:88:99 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - [''] + - - SSC SSC2 sta -S -b 44:55:66:77:88:99 + - ['R SSC2 RE \+SCAN:.+,44:55:66:77:88:99,'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -Q -o 1 + - ['R SSC2 A :\+STAMAC:(.+)\r\n'] + - - SSC SSC2 mac -S -o 1 -m 22:33:44:55:66:77 + - ['R SSC2 C +MAC:STA,OK'] + - - SSC SSC2 sta -C -s -p + - ['P SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -L + - ['R SSC1 C +LSTA:22:33:44:55:66:77'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + comment: '' + execution time: 0.0 + expected result: '1.OK + + 2.ok + + 3.ok + + 4.ok + + 5.ok + + 6.ok + + 7.ok + + 8.ok + + 9.ok' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: "1.target1 设置sta mode下的mac 44:55:66:77:88:99\n2.target1下设置ssid 和pwd 加密方式\n\ + 3.target2 查询mac为44:55:66:77:88:99的ssid\n4.target1 设置sta mode下的mac target_ap_mac\n\ + 5.target2 查询sta mode 下的mac 为target2_mac_tmp\n6.target2 设置sta mode 下的mac 为22:33:44:55:66:77\n\ + 7.target2 jap target1\n8.target1 查询连接到的sta \n9.target2 设置sta mode 下的mac 为 target2_mac" + sub module: MAC Address + summary: set mac and do scan/JAP/SAP + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: mac address function test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -t 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 2 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 4 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 ap -S -s -p -t 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] + - - SSC SSC1 ap -S -s -p -t 5 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S + - ['R SSC2 RE "\+SCAN:%%s,.+,0,\d+"%%()'] + comment: '' + execution time: 0.0 + expected result: "1.target1 set AP,open, \n2.target 2 jap succeed\n3.target1 set\ + \ AP,wpa_psk \n4.target 2 jap succeed\n5.target1 set AP, wpa2_psk \n6.target 2\ + \ jap succeed\n7.target1 set AP,wap_wpa2_psk\n8.target 2 jap succeed\n9.target1\ + \ set AP,加密方式为t 1\n10.target 2 上查询到target_ssid\n11.target1 set AP,加密方式为t 5\n12.target\ + \ 2 上查询到target_ssid" + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: "1.target1下设置ssid 和pwd,加密方式 open\n2.target2 jap target1\n3.target1下设置ssid\ + \ 和pwd,加密方式 wpa_psk \n4.target2 jap target1\n5.target1下设置ssid 和pwd,加密方式 wpa2_psk\ + \ \n6.target 2 jap target1\n7.target1下设置ssid 和pwd,加密方式 wap_wpa2_psk\n8.target2\ + \ jap target1\n9.target1下设置ssid 和pwd,加密方式 wep \n10.target2上查询target_ssid\n11.target1下设置ssid\ + \ 和pwd,加密方式 t 5 错误的加密方式\n12.target2上查询 target_ssid" + sub module: WIFI Connect + summary: station SAP+JAP test, different encryption + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -h + 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 P , R SSC2 C +SCANDONE] + - - SSC SSC1 ap -S -s -p -t -h + 1 + - ['R SSC1 C +SAP:OK'] + - - DELAY 3 + - [''] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 C +SCANDONE] + - - DELAY 3 + - [''] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 NP C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP,set ssid broad cast + + 2.target 2上scan target_ap_mac + + 3.target1 set AP,set ssid hidden, + + 4.target 2上不能scan target_ap_mac' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. target1下设置ssid 和pwd 加密方式,set ssid broad cast + + 2.target 2上scan target_ap_mac + + 3. target1下设置ssid 和pwd 加密方式,set ssid hidden, + + 4.target 2上scan target_ap_mac' + sub module: WIFI Connect + summary: station SAP+JAP test, ssid hidden + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -m + 1 + - ['R SSC1 C +SAP:OK'] + - - WIFI DISCONN + - ['R PC_COM C +WIFIDISCONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - WIFI CONN + + - ['R PC_COM C +WIFICONN:ERROR'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP,set max allowed sta as 1 + + 2. use PC disconnect, + + 3.target 2 jap succeed + + 4.PC WIFI can not CONN' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式,set max allowed sta as 1 + + 2.use PC disconnect target1 + + 3.target 2 jap target1 + + 4.PC WIFI CONNECT target1' + sub module: WIFI Connect + summary: station SAP test, max allowed sta + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: SAP/JAP with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0201 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:OK'] + - - SSC SSC1 sta -Q + - ['R SSC1 C +JAP:DISCONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target1 jion AP 成功 + + 2.查询JAP的状态 + + 3.target1 断开AP + + 4.查询target1 JAP 是DISCONN' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: WIFI MAC + steps: '1.target1 jion AP 成功 + + 2.查询JAP的状态 + + 3.target1 断开AP + + 4.查询target1 JAP 是DISCONN' + sub module: WIFI Connect + summary: JAP query test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: query JAP status + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0301 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t -h + 0 -m 8 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,3,0,8,\d+"%%(,)'] + comment: '' + execution time: 0.0 + expected result: '1. target1 set AP + + 2.target 1上查询到跟设置AP时一致' + initial condition: APSTA1 + initial condition description (auto): testing ap on sta + ap mode (autogen by APM1) + level: Integration + module: WIFI MAC + steps: '1. target1 set AP + + 2.target 1上查询到跟设置AP时一致' + sub module: WIFI Connect + summary: AP config query test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: query AP config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0401 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -R -a 0 + - ['R SSC1 C +AUTORECONN:OK'] + - - SSC SSC1 sta -R -a 2 + - ['R SSC1 C +AUTORECONN:0'] + - - SSC SSC1 reboot + - [''] + - - DELAY 15 + - [''] + - - SSC SSC1 sta -Q + - ['R SSC1 C JAP:DISCONNECTED'] + - - SSC SSC1 sta -R -a 1 + - ['R SSC1 C +AUTORECONN:OK'] + - - SSC SSC1 sta -R -a 2 + - ['R SSC1 C +AUTORECONN:1'] + - - SSC SSC1 reboot + - ['R SSC1 C +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.设置autoreconn,关闭 + + 2.查询当前autoreconn状态是否关闭 + + 3.重启系统，等待15s + + 4.查询target1 未自动重连AP + + 5.设置autoreconn,开启 + + 6.查询当前autoreconn状态是否开启 + + 7.系统重启后target1 自动重连AP' + initial condition: STAAP2 + initial condition description (auto): testing sta on sta + ap mode, join AP, DHCP + on (autogen by STAM2) + level: Integration + module: WIFI MAC + steps: '1.设置autoreconn,关闭 + + 2.查询当前autoreconn状态是否关闭 + + 3.重启系统，等待15s + + 4.查询target1 未自动重连AP + + 5.设置autoreconn,开启 + + 6.查询当前autoreconn状态是否开启 + + 7.系统重启后target1 自动重连AP' + sub module: WIFI Connect + summary: auto reconnect test + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: power on auto reconnect test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0501 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - [''] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 15 + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 0 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC2 sta -R -r 2 + - ['R SSC2 C +RECONN:0'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - [''] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 15 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + comment: '' + execution time: 0.0 + expected result: '1.设置reconn,开启（此功能不需要重启系统） + + 2.target1 set AP + + 3.target2 JAP target1 成功 + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.成功 + + 7.查询reconn状态，关闭 + + 8.修改mode 成功 + + 9.等待15s，target2 不会自动重连target1' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: "1.设置reconn,开启（此功能不需要重启系统）\n2.target1下设置ssid 和pwd 加密方式\n3.target2 JAP target1\ + \ \n4.target1 修改mode 为sta mode\n5.等待10s，target1 修改mode 为softAP mode\n6.设置reconn，关闭\n\ + 7.查询reconn状态，关闭\n8.target1 修改mode 为sta mode\n9.等待15s，target1 修改mode 为softAP mode" + sub module: WIFI Connect + summary: reconnect policy test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: reconnect policy test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0502 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -R -r 1 + - ['R SSC2 C +RECONN:OK'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - DELAY 5 + - ['R SSC2 C +JAP:DISCONNECTED'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - DELAY 10 + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - DELAY 10 + - [P PC_COM C +DELAYDONE, 'P SSC2 NC +JAP:CONNECTED'] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP + + 2.target2 jap target 1 + + 3.设置reconn,开启（此功能不需要重启系统） + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.target2 断开target1 连接' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式 + + 2.target2 jap target 1 + + 3.设置reconn,开启（此功能不需要重启系统） + + 4.target2 断开target1 连接 + + 5.等待10s，target2 自动重连target1 + + 6.target2 断开target1 连接' + sub module: WIFI Connect + summary: will not do reconnect after manually disconnected + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: abnormal/special use + test point 2: reconnect policy test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0601 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -L + - ['R SSC1 C +LSTA:', 'R SSC1 C +LSTA:', R SSC1 C +LSTADONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP + + 2.PC WIFI CONNECTED + + 3.target2 jap target 1 + + 4.查询到两个sta 连接到target1 上' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. target1下设置ssid 和pwd 加密方式 + + 2.PC WIFI CONNECTED target1 + + 3.target2 jap target 1 + + 4.查询到两个sta 连接到target1 上' + sub module: WIFI Connect + summary: list stations connected to soft ap test + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: list SoftAP connected station + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0801 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -S -s -p -t 2 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,2,0'] + - - SSC SSC1 ap -S -s -p -t 3 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,3,2'] + - - SSC SSC1 ap -S -s -p -t 4 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,4,3'] + - - SSC SSC1 ap -S -s -p -t 0 + - ['P SSC1 C +SAP:OK', 'P SSC2 C +JAP:AUTHCHANGED,0,4'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. succeed + + 3. auth change event old mode 0 new mode 2 + + 4. auth change event old mode 2 new mode 3 + + 5. auth change event old mode 3 new mode 4 + + 6. auth change event old mode 4 new mode 0' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. set target1 softap auth mode 0 + + 2. target2 connect to target1 + + 3. set target1 softap auth mode 2, wait sta connected + + 4. set target1 softap auth mode 3, wait sta connected + + 5. set target1 softap auth mode 4, wait sta connected + + 6. set target1 softap auth mode 0, wait sta connected' + sub module: WIFI Connect + summary: test auth change event + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi auth changed event test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0901 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: basic function + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - SSC SSC1 sta -D + - ['R SSC1 RE JAP:DISCONNECTED,\d+,8'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE JAP:DISCONNECTED,\d+,15'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE JAP:DISCONNECTED,\d+,201'] + comment: '' + execution time: 0.0 + expected result: '1. disconnect event reason REASON_ASSOC_LEAVE + + 2. disconnect event reason REASON_4WAY_HANDSHAKE_TIMEOUT + + 3. disconnect event reason REASON_NO_AP_FOUND' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: WIFI MAC + steps: '1. sta connect to AP, and disconnect + + 2. connect to AP with wrong password + + 3. connect to AP not exist' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_ASSOC_LEAVE, REASON_4WAY_HANDSHAKE_TIMEOUT, + REASON_NO_AP_FOUND + test environment: SSC_T1_1 + test environment description (auto): 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0902 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p + - ['R SSC1 C +JAP:CONNECTED'] + - - APC OFF + - [P PC_COM L OK, 'R SSC1 RE JAP:DISCONNECTED,\d+,200'] + - - APC ON + - [P PC_COM L OK] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. disconnect event REASON_BEACON_TIMEOUT' + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: WIFI MAC + steps: '1. connect to AP + + 2. AP power off' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_BEACON_TIMEOUT + test environment: SSC_T1_APC + test environment description (auto): "PC has 1 wired NIC connected to AP.\nPC has\ + \ 1 wired NIC connected to APC (static IP within the same subnet with APC). \n\ + APC control AP power supply. \nPC has 1 WiFi NIC. \n1 SSC target connect with\ + \ PC by UART." + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0903 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -C -s -p bacfd + - ['R SSC1 RE JAP:DISCONNECTED,\d+,2'] + comment: '' + execution time: 0.0 + expected result: 1. disconect event reason REASON_AUTH_EXPIRE + initial condition: STAAP1 + initial condition description (auto): testing sta on sta + ap mode, quit AP (autogen + by STAM1) + level: Integration + module: WIFI MAC + steps: 1. connect WEP ap with error password (valid wep password) + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_AUTH_EXPIRE + test environment: SSC_T1_WEP + test environment description (auto): '1 SSC target connect with PC by UART. + + One WEP share key AP placed near SSC1.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_CONN_0904 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p -t 3 -m 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -C -s -p 1234567890 + - ['R SSC2 RE JAP:DISCONNECTED,\d+,204'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:OK'] + - - WIFI CONN + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - SSC SSC2 sta -C -s -p + - ['R SSC2 RE JAP:DISCONNECTED,\d+,5'] + - - WIFI DISCONN + - [P PC_COM C OK, 'R SSC2 C +JAP:CONNECTED'] + - - SSC SSC1 ap -S -s -p -t 3 -m 1 + - ['P SSC1 C +SAP:OK', 'P SSC2 RE JAP:DISCONNECTED,\d+,4'] + comment: '' + execution time: 0.0 + expected result: '1. succeed + + 2. disconnect event REASON_HANDSHAKE_TIMEOUT + + 3. succeed + + 4. succeed + + 5. disconnect event REASON_ASSOC_TOOMANY + + 6. succeed, target2 connect succeed + + 7. disconnect event REASON_ASSOC_EXPIRE' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1. config target1 softap max sta allowed 1 + + 2. target2 connect to target1 with wrong password + + 3. target2 disconnect + + 4. PC WIFI NIC connect to target1 + + 5. target2 connect to target1 with correct password + + 6. PC WIFI NIC disconnect + + 7. reconfig softap' + sub module: WIFI Connect + summary: test wifi disconnect reason REASON_ASSOC_TOOMANY, REASON_HANDSHAKE_TIMEOUT, + REASON_ASSOC_EXPIRE + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: wifi disconnect reason test + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_SCAN_0101 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -S -s .,juhg123 + - ['R SSC2 NC +SCAN: C +SCANDONE'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -s + - ['R SSC2 C +SCAN:', R SSC2 P , 'R SSC2 NC +SCAN: C +SCANDONE'] + comment: '' + execution time: 0.0 + expected result: '1.target 2上不能scan .,juhg123 + + 2.target1 set AP + + 3.target2上查询到' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target 2 scan .,juhg123 + + 2.target1下设置ssid 和pwd 加密方式 + + 3.target2 scan ' + sub module: WIFI Scan + summary: scan with scan config ssid + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_SCAN_0102 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC2 sta -S -b ff:ff:ff:ff:ff:11 + - ['R SSC2 NC +SCAN: C +SCANDONE'] + - - SSC SSC2 sta -S -b + - ['R SSC2 RE "\+SCAN:.+,%%s"%%()', 'R SSC2 NC +SCAN: C +SCANDONE'] + comment: '' + execution time: 0.0 + expected result: '1.target2 上不能查询到此mac + + 2.target2上查询到' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target2 上查询此macff:ff:ff:ff:ff:11 + + 2.target2上查询' + sub module: WIFI Scan + summary: scan with scan config bssid + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_SCAN_0103 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -n 6 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -n 5 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -n 6 + - ['R SSC2 C +SCAN:', R SSC2 P ] + comment: '' + execution time: 0.0 + expected result: '1.target1 QAP + + 2. target1 set AP,set channel 6 + + 3.target2 上scan不到 channel 5 + + 4.target2 上查询channel 6的' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target1 断开连接AP + + 2.target1下设置ssid 和pwd 加密方式,set channel 6 + + 3.target2 上scan channel 5 + + 4.target2 上查询channel 6的' + sub module: WIFI Scan + summary: scan with scan config channel + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_SCAN_0104 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 P C +SCANDONE] + - - SSC SSC2 sta -S -h 1 + - [R SSC2 P C +SCANDONE] + - - SSC SSC1 ap -S -s -p 123456789 -h 1 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -h 0 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -h 1 + - [R SSC2 P C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 set AP,set ssid broad cast + + 2.target 2上scan + + 3.target 2上scan + + 4.target1 set AP,set ssid hidden, + + 5.target 2上不能查询到 + + 6.target 2上查询到' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target1下设置ssid 和pwd 加密方式,set ssid broad cast + + 2.target 2上scan + + 3.target 2上scan + + 4.target1下设置ssid 和pwd 加密方式,set ssid hidden, + + 5.target 2上查询 + + 6.target 2上查询' + sub module: WIFI Scan + summary: scan with scan config show hidden + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) +- CI ready: 'Yes' + ID: ^WIFI_SCAN_0105 + SDK: '8266_NonOS + + 8266_RTOS + + ESP32_IDF' + Test App: SSC + allow fail: '' + auto test: 'Yes' + category: Function + cmd set: + - '' + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 ap -S -s -p 123456789 -t 3 -h 0 -n 11 + - ['R SSC1 C +SAP:OK'] + - - SSC SSC2 sta -S -s -b -n 11 + - [R SSC2 P C +SCANDONE] + - - SSC SSC2 sta -S -s -b -n 11 + - [R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -s -b ff:ff:ff:ff:ff:11 -n 11 + - [R SSC2 P , R SSC2 NP C +SCANDONE] + - - SSC SSC2 sta -S -s -b -n 10 + - [R SSC2 P , R SSC2 NP C +SCANDONE] + comment: '' + execution time: 0.0 + expected result: '1.target1 QAP + + 2. target1 set AP,set ssid broad cast,set channel 11 + + 3.target2 上查询到 + + 4.target2 上查询不到 + + 5.target2 上查询不到 + + 6.target2 上查询不到' + initial condition: T2_2 + initial condition description (auto): target 1 as AP+STA, target 2 as AP+STA (autogen) + level: Integration + module: WIFI MAC + steps: '1.target1 QAP + + 2. target1 set AP,set ssid broad cast,set channel 11 + + 3.target2 上查询到 + + 4.target2 上查询不到 + + 5.target2 上查询不到 + + 6.target2 上查询不到' + sub module: WIFI Scan + summary: scan with several configs + test environment: SSC_T2_1 + test environment description (auto): 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.' + test point 1: basic function + test point 2: scan with different config + version: v1 (2016-8-15) diff --git a/components/idf_test/integration_test/TestEnvAll.yml b/components/idf_test/integration_test/TestEnvAll.yml new file mode 100644 index 0000000000..afa6cb812a --- /dev/null +++ b/components/idf_test/integration_test/TestEnvAll.yml @@ -0,0 +1,275 @@ +test environment: +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_1, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_2, + test environment detail: 'PC has 1 WiFi NIC. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_3, + test environment detail: 'Able to access WAN after connect to AP. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_ADC, + test environment detail: 'PC has 1 wired NIC connected to AP. + + Analog input connect to AT1 TOUT. + + Multimeter connect to input, able to measure input voltage. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_APC1, + test environment detail: "PC has 1 wired NIC connected to AP.\nPC has 1 wired NIC\ + \ connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply. \nPC has 1 WiFi NIC. \n1 AT target connect with PC by UART\ + \ (AT and LOG port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_APC2, + test environment detail: "Able to access WAN after connect to AP.\nPC has 1 wired\ + \ NIC connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply.\nPC has 1 WiFi NIC.\n1 AT target connect with PC by UART (AT\ + \ and LOG port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_HighSpeedUART, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 AT target connect with PC by high speed UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_SmartConfigIOT, + test environment detail: '1 AT target connect with PC by UART (AT and LOG port). + + PC has 1 wired NIC connect to Common AP. + + Several AP are placed near AT target. + + Several smart phone installed test APK are placed near AT target.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_JAP, + test environment detail: "Several AP are placed near AT target.\nPC has 1 wired\ + \ NIC connected to APC (static IP within the same subnet with APC).\nAPC control\ + \ power supply for all APs. \n2 AT target connect with PC by UART (AT and LOG\ + \ port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_Sleep, + test environment detail: 'AP support DTIM placed with AT target. + + 2 AT target connect with PC by UART (AT and LOG port). + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of AT1. + + AT1''s light sleep wakeup pin and wakeup indication connect with AT2''s GPIO.', + test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_SmartConfig, + test environment detail: '2 AT target connect with PC by UART (AT and LOG port). + + PC has 1 WiFi NIC. + + One HT20 AP and One HT40 AP are placed near target.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: IR_T2_1, test environment detail: '[TBD] 本测试为非自动测试, 红外能够做到数据收发吻合即可通过', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: NVS_T1_1, + test environment detail: '1 NVS target connect with PC by UART. + + 1 SSC target connect with PC by UART. + + SSC2 GPIO connect to NVS1 power control pin.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: PWM_T1_1, test environment detail: "[TBD]\ + \ 1. PWM OS SDK 以及 Non-OS SDK的测试建议分开进行, 放在不同的文件夹, 防止文件命名混淆\n2. 分析CSV文件的Python脚本只能分析单个channel\ + \ \n3. 如果Init脚本打印\"Network Error\" 检查TCP Server是不是正常发送data", test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_1, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_2, + test environment detail: 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_8089, + test environment detail: 'PC has 1 wired NIC connected to AP. + + 1 8089 tablet able to run iperf test placed near SSC1. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_ADC, + test environment detail: 'PC has 1 wired NIC connected to AP. + + Analog input connect to SSC1 TOUT. + + Multimeter connect to input, able to measure input voltage. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_APC, + test environment detail: "PC has 1 wired NIC connected to AP.\nPC has 1 wired NIC\ + \ connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply. \nPC has 1 WiFi NIC. \n1 SSC target connect with PC by UART.", + test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_Enterprise, + test environment detail: "AP use WPA2-Etherprise is placed near SSC1. \n1 SSC target\ + \ connect with PC by UART.", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_IOT1, + test environment detail: 'PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART. + + AP todo IOT test are placed near SSC1.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T1_InitData, + test environment detail: '2 SSC target connect with PC by UART. + + SSC1 use 40M crystal oscillator. + + SSC2 use normal 26M crystal oscillator. + + SSC2 GPIO connect to SSC1 power control pin.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_ShieldBox, + test environment detail: 'refer to figure. + + All APs and APC should be set to the same IP subnet. + + PC wired NIC should set static IP address within the same subnet with AP. + + Must use onboard wired NIC.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_TempBox, + test environment detail: '1 SSC target connect with PC by UART. + + Put SSC target to temperature box.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: SSC_T1_Timer, test environment detail: '[TBD] + 通过串口工具调节Timer, 将GPIO_13端口连接到逻辑分析仪', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_VDD33, + test environment detail: '1 SSC target connect with PC by UART. + + Multimeter connect to VDD33, able to measure voltage.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_WEP, + test environment detail: '1 SSC target connect with PC by UART. + + One WEP share key AP placed near SSC1.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO1, test environment detail: '[TBD] 2个ESP_8266通过UART连到PC, ESP_8266的 + GPIO_6相连', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO2, test environment detail: '[TBD] 1. 2个ESP_8266通过UART连到PC, ESP_8266的 + GPIO_15通过面包板相连 + + 2. 可借助面包板, 将GPIO_15, 以及中断函数被打开的8266板的GPIO_2 相连', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO3, test environment detail: '[TBD] 2个ESP_8266通过UART连到PC, ESP_8266之间需要测试的Target_GPIO相连', + test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_PhyMode, + test environment detail: '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_ShieldBox, + test environment detail: '2 SSC target connect with PC by UART. + + Put them to Shield box.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_Sleep1, + test environment detail: 'AP support DTIM placed with AT target. + + 2 SSC target connect with PC by UART. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of SSC1. + + SSC1''s light sleep wakeup pin and wakeup indication connect with AT2''s GPIO. + + SSC1''s XPD connect with RSTB.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_Sleep2, + test environment detail: 'AP support DTIM placed with AT target. + + 2 SSC target connect with PC by UART. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of SSC1. + + SSC1''s RSTB pin connect with AT2''s GPIO.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_SmartConfig, + test environment detail: '2 SSC target connect with PC by UART. + + PC has 1 WiFi NIC. + + One HT20 AP and One HT40 AP are placed near target.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 3.0, script path: EnvBase.py, tag: SSC_T3_PhyMode, + test environment detail: '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 5.0, script path: EnvBase.py, tag: SSC_T5_1, + test environment detail: 5 SSC target connect with PC by UART., test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T6_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 6 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: TempSensor_T1_1, + test environment detail: 'Tempeture sensor target connect with PC by UART. + + AP support DTIM placed with AT target. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of TempSensor1. + + PC has 1 wired NIC connected to switch. + + APC, AP also connect with swtich. + + All devices connected with switch use the same IP subnet. + + APC control AP power supply.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: UART_T1_1, test environment detail: '[TBD] + 将ESP_8266通过UART连到PC', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: UART_T1_2, test environment detail: '[TBD] ESP_8266通过UART_0通过USB, UART_1 TXD + 通过 TTLcable 连到PC', test script: EnvBase} +- {PC OS: linux, Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: WebServer_T1_1, + test environment detail: 'Web Server target connect with PC by UART. + + PC has 1 wired NIC connected to switch. + + APC, AP also connect with swtich. + + All devices connected with switch use same IP subnet. + + APC control AP power supply.', test script: EnvBase} +- {PC OS: linux, Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: WebServer_T1_2, + test environment detail: 'Web Server target connect with PC by UART. + + 4 PC with WiFi NIC placed near WebServer1.', test script: EnvBase} diff --git a/components/idf_test/uint_test/InitialConditionAll.yml b/components/idf_test/uint_test/InitialConditionAll.yml new file mode 100644 index 0000000000..ba06af9f87 --- /dev/null +++ b/components/idf_test/uint_test/InitialConditionAll.yml @@ -0,0 +1,2935 @@ +initial condition: +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: AP mode, DHCP on, will autogen a TC with initial condition + APSTA1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 31.0 + tag: APM1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: AP mode, PC join AP, DHCP on, will autogen a TC with initial + condition APSTA2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 38.0 + tag: APM2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: AP mode, will NOT autogen a TC with initial condition + APSTA1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 31.0 + tag: APO1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: AP mode, will NOT autogen a TC with initial condition + APSTA2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 38.0 + tag: APO2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + initial condition detail: AP only mode, running BIN0 (located on flash id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: APOBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + initial condition detail: testing ap on sta + ap mode (autogen by APM1) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 59.0 + tag: APSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 ap -Q + - ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(,)'] + - - SSC SSC1 ap -L + - ['R SSC1 RE "\+LSTA:.+,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + initial condition detail: testing ap on sta + ap mode, PC join AP (autogen by APM2) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC1 ap -S -s -p -t + - ['R SSC1 C +SAP:OK'] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 66.0 + tag: APSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 5 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + initial condition detail: StationSoftAP mode + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: ATAP1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 5 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, PC join Target AP, multi link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 R *] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: ATAP3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - DELAY 10 + - [''] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, PC join Target AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 45.0 + tag: ATAP4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, both PC join Target AP, single link, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAP5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, both PC join Target AP, multi link, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAP6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:2'] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + initial condition detail: SoftAP mode, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 59.0 + tag: ATAPO1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + initial condition detail: SoftAP mode, PC join Target AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 R *] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 66.0 + tag: ATAPO3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 L OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATC AT1 CWSAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + - - WIFI CONN + + - ['R PC_COM NC ERROR C +WIFICONN:OK'] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: SoftAP mode, PC join Target AP, single link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWLIF + - [R AT1 P ] + - - ATS AT1 AT+CWDHCP_DEF=0,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 73.0 + tag: ATAPO4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: SoftAP mode, both PC join Target AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAPO5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: SoftAP mode, both PC join Target AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATAPO6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: ATAPSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode, DHCP client on + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: ATAPSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + initial condition detail: StationSoftAP mode, connected to AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 94.0 + tag: ATAPSTA3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: StationSoftAP mode, connected to AP, single link, use + dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CWDHCP_DEF=2,1 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 101.0 + tag: ATAPSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, connected to AP, multi link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 129.0 + tag: ATAPSTA5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:3'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: StationSoftAP mode, connected to AP, single link, use + static ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 136.0 + tag: ATAPSTA6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + initial condition detail: 'first time usage. Use restore function. ' + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+RESTORE + - [R AT1 L OK, R AT1 C ready] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 143.0 + tag: ATFTU + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT + - [R AT1 L OK] + - - ATS AT1 AT + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+RST + - [R AT1 L OK] + initial condition detail: none + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 3.0 + tag: ATNone + test script: InitCondBase +- check cmd set: + - '' + - - DELAY 0.1 + - [dummy] + force restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + initial condition detail: none 2 + restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 108.0 + tag: ATNone2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: same as STA1, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATOSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: same as STA4, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ATOSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:1 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + initial condition detail: same as OT2_1, but will not autogen STA+AP STA test case + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 52.0 + tag: ATOT2_1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: station mode, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATSTA1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + initial condition detail: station mode, DHCP client on, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 10.0 + tag: ATSTA2 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + initial condition detail: station mode, connected to AP, multi link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 38.0 + tag: ATSTA3 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CWDHCP_CUR? + - ['R AT1 C DHCP:3'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + initial condition detail: station mode, connected to AP, single link, use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATS AT1 AT+CWDHCP_DEF=1,1 + - [R AT1 R *] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ATSTA4 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:1'] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: station mode, connected to AP, multi link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=1 + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 115.0 + tag: ATSTA5 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 L +CWMODE_CUR:1'] + - - ATS AT1 AT+CWJAP_CUR? + - ['R AT1 C +CWJAP_CUR:', R AT1 P ] + - - ATS AT1 AT+CIPMUX? + - ['R AT1 L +CIPMUX:0'] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + initial condition detail: station mode, connected to AP, single link, use static + ip + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=1 + - [R AT1 L OK] + - - ATC AT1 CWJAP_DEF + - [R AT1 L OK] + - - ATS AT1 AT+CIPSERVER=0 + - [R AT1 R *] + - - ATC AT1 CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMUX=0 + - [R AT1 L OK] + - - ATS AT1 AT+CIPCLOSE + - [R AT1 R *] + - - ATS AT1 AT+CIPMODE=0 + - [R AT1 R *] + - - ATC AT1 CIPSTA_DEF + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 122.0 + tag: ATSTA6 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:3 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:1 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + initial condition detail: Target 1 in StationSoftAP mode, Target 2 in station mode, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=3 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=1 + - [R AT2 L OK] + - - ATS AT1 AT+CWQAP + - [R AT1 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 52.0 + tag: ATT2_1 + test script: InitCondBase +- check cmd set: + - '' + - - ATS AT1 AT+CWMODE_CUR? + - ['R AT1 C +CWMODE_CUR:2 C OK'] + - - ATS AT2 AT+CWMODE_CUR? + - ['R AT2 C +CWMODE_CUR:3 C OK'] + - - ATS AT1 AT+CWJAP_CUR? + - [R AT1 NC OK L ERROR] + force restore cmd set: + - '' + - - ATS AT1 AT+RST + - [R AT1 C ready] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=3 + - [R AT2 L OK] + initial condition detail: Target 1 in SoftAP mode, Target 2 in StationSoftAP mode, + use dhcp + restore cmd set: + - '' + - - ATSO AT1 +++ + - [''] + - - ATS AT1 AT + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - ATS AT1 AT+CWMODE_DEF=2 + - [R AT1 L OK] + - - ATS AT2 AT+CWMODE_DEF=3 + - [R AT2 L OK] + restore post cmd set: + - '' + - - ATS AT1 AT+CWSTOPSMART + - [R AT1 R *] + - - ATS AT1 AT+SAVETRANSLINK=0 + - [R AT1 R *] + - - AT+SYSRAM + - ['R AT1 A :(\d+)'] + script path: InitCondBase.py + start: 80.0 + tag: ATT2_2 + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] op -S -o 1 + - ['P SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] sta -D + - ['P SSC[1-] C +QAP:OK'] + initial condition detail: all mesh node disabled + restore cmd set: + - '' + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] op -S -o 1 + - ['P SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] sta -D + - ['P SSC[1-] C +QAP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: DISABLED + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + force restore cmd set: + - '' + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC[1-] mesh -A -s -k + - ['P SSC[1-] C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 2 + - ['P SSC1 C +MESH:ENABLED'] + - - SOC SOC1 MACCEPT GSOC1 + - [R SOC_COM L OK] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - ['P SSC[2-] C +MESH:ENABLED'] + - - DELAY 60 + - [''] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + - - SSC SSC[1-] mesh -O -t 1 -o 1 + - ['P SSC[1-] C +MESH:OK'] + initial condition detail: all mesh node enabled as ONLINE, mesh network established + restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SOC SOC1 LISTEN + - [R SOC_COM L OK] + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC[1-] mesh -A -s -k + - ['P SSC[1-] C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 2 + - ['P SSC1 C +MESH:ENABLED'] + - - SOC SOC1 MACCEPT GSOC1 + - [R SOC_COM L OK] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - ['P SSC[2-] C +MESH:ENABLED'] + - - DELAY 60 + - [''] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + - - SSC SSC[1-] mesh -O -t 1 -o 1 + - ['P SSC[1-] C +MESH:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: ENABLED_1 + test script: InitCondBase +- check cmd set: + - '' + - - ASSERT + - [dummy] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['P SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC1 mesh -A -s -k + - ['P SSC1 C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 1 + - ['P SSC1 C +MESH:ENABLED'] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - [''] + - - DELAY 60 + - ['P SSC[2-] C +MESH:ENABLED'] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + initial condition detail: root as LOCAL, rest node as ONLINE, mesh network established + restore cmd set: + - '' + - - SSC SSC[1-] mesh -E -o 0 + - ['P SSC[1-] C +MESH:DISABLED'] + - - SSC SSC[1-] mesh -I -g -a 4 -k -i + -p -h 5 + - ['P SSC[1-] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK'] + - - SSC SSC1 mesh -A -s -k + - ['P SSC1 C +MESHINIT:AP,OK'] + - - SSC SSC1 mesh -E -o 1 -t 1 + - ['P SSC1 C +MESH:ENABLED'] + - - SSC SSC[2-] mesh -E -o 1 -t 2 + - [''] + - - DELAY 60 + - ['P SSC[2-] C +MESH:ENABLED'] + - - SSC SSC[1-] mesh -C + - ['P SSC[1-] C +MESH:CONNECTED'] + - - SSC SSC[1-] mesh -Q -t 4 + - ['R SSC[1-] T '] + - - MESHTREE + - ['R PC_COM RE "MESHTREE:%%s%20nodes"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: ENABLED_2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['R SSC[1-] C !!!ready!!!'] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -m -o 2 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + initial condition detail: one target in AP mode and espnow is de-initialized + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 mac -S -m -o 2 + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC1 espnow -D + - ['R SSC1 C +ESPNOW:'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: NOW1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1-] op -Q + - ['R SSC[1-] C +CURMODE:2'] + - - SSC SSC[1-] mac -Q -o 3 + - ['R SSC[1-] P ]_ap_mac> P ]_mac>'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + force restore cmd set: + - '' + - - SSC SSC[1-] reboot + - ['R SSC[1-] C !!!ready!!!'] + - - SSC SSC[1-] op -S -o 3 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 + - ['R SSC[1-] C +MAC:AP,OK'] + - - SSC SSC[1-] mac -S -m ]_mac> -o 1 + - ['R SSC[1-] C +MAC:STA,OK'] + - - SSC SSC[1-] op -S -o 2 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + initial condition detail: multiple () targets in AP mode, espnow is initialized + with self role slave + restore cmd set: + - '' + - - SSC SSC[1-] op -S -o 3 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] mac -S -m ]_ap_mac> -o 2 + - ['R SSC[1-] C +MAC:AP,OK'] + - - SSC SSC[1-] mac -S -m ]_mac> -o 1 + - ['R SSC[1-] C +MAC:STA,OK'] + - - SSC SSC[1-] op -S -o 2 + - ['R SSC[1-] C +MODE:OK'] + - - SSC SSC[1-] espnow -D + - ['R SSC[1-] C +ESPNOW:'] + - - SSC SSC[1-] espnow -I + - ['R SSC[1-] C +ESPNOW:OK'] + - - SSC SSC[1-] espnow -R -t Set -r 2 + - ['R SSC[1-] C +ESPNOW:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: NOW2 + test script: InitCondBase +- check cmd set: + - '' + - - DELAY 0.1 + - [dummy] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + initial condition detail: none + restore cmd set: + - '' + - - DELAY 0.1 + - [dummy] + restore post cmd set: + - '' + - - DELAY 0.1 + - [dummy] + script path: InitCondBase.py + start: 10.0 + tag: None + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + initial condition detail: one target and simple is de-inited + restore cmd set: + - '' + - - SSC SSC1 sp -D + - ['R SSC1 C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 31.0 + tag: PAIR1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1,2] op -Q + - ['R SSC[1,2] C +MODE:[2,1]'] + - - SSC SSC[1,2] mac -Q -o 3 + - ['R SSC[1,2] P P '] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC[1,2] reboot + - ['R SSC[1,2] C !!!ready!!!'] + - - SSC SSC[1,2] op -S -o 3 + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] op -S -o [2,1] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + initial condition detail: target1 in AP mode, target2 in STA mode, two targets de-init + and init simple pair + restore cmd set: + - '' + - - SSC SSC[1,2] op -S -o 3 + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] op -S -o [2,1] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 38.0 + tag: PAIR2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1,2] op -Q + - ['R SSC[1,2] C +MODE:[3,3]'] + - - SSC SSC[1,2] mac -Q -o 3 + - ['R SSC[1,2] P P '] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + force restore cmd set: + - '' + - - SSC SSC[1,2] reboot + - ['R SSC[1,2] C !!!ready!!!'] + - - SSC SSC[1,2] op -S -o [3,3] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + initial condition detail: target1 and target2 in STA+AP mode, two targets de-init + and init simple pair + restore cmd set: + - '' + - - SSC SSC[1,2] op -S -o [3,3] + - ['R SSC[1,2] C +MODE:OK'] + - - SSC SSC[1,2] mac -S -m -o 2 + - ['R SSC[1,2] C +MAC:AP,OK'] + - - SSC SSC[1,2] mac -S -m -o 1 + - ['R SSC[1,2] C +MAC:STA,OK'] + - - SSC SSC[1,2] sp -D + - ['R SSC[1,2] C +SP:OK'] + - - SSC SSC[1,2] sp -I + - ['R SSC[1,2] C +SP:OK'] + restore post cmd set: + - '' + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 45.0 + tag: PAIR3 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: testing sta on sta + ap mode, quit AP (autogen by STAM1) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 45.0 + tag: STAAP1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: testing sta on sta + ap mode, join AP, DHCP on (autogen + by STAM2) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 52.0 + tag: STAAP2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: APSTA mode, connected to AP, running BIN0 (located on + flash id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 24.0 + tag: STAAPBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: sta mode, quit AP, DHCP on, will autogen a TC with initial + condition STAAP1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 17.0 + tag: STAM1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: sta mode, join AP, DHCP on, will autogen a TC with initial + condition STAAP2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 24.0 + tag: STAM2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 1 + - ['R SSC1 C BIN_ID,0'] + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + force restore cmd set: + - '' + - - SSC SSC1 upgrade -R -r 1 -s + - [R SSC1 NC ERROR C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SOC SOC1 ULISTEN + - [R SOC_COM L OK] + - - SOC SOC1 SETOPT REPLY BIN + - [R SOC_COM C OK] + - - SSC SSC1 upgrade -I -b 0 -f 0 + - ['P SSC1 C +UPGRADE:OK'] + - - SSC SSC1 upgrade -U -i -p -u + - ['P SSC1 C +UPGRADE:SUCCEED'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: STA mode, connected to AP, running BIN0 (located on flash + id 0) + restore cmd set: + - '' + - - SSC SSC1 upgrade -Q -t 2 -b 0 + - ['R SSC1 C BIN_INFO,0'] + - - SSC SSC1 upgrade -R -b 0 + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 upgrade -D + - ['R SSC1 C +UPGRADE:OK'] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 17.0 + tag: STAMBIN0 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + initial condition detail: sta mode, quit AP, will NOT autogen a TC with initial + condition STAAP1 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 sta -D + - ['R SSC1 C +QAP:'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 17.0 + tag: STAO1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:1'] + - - SSC SSC1 sta -Q + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + - - SSC SSC1 dhcp -Q -o 1 + - ['R SSC1 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 1 + - [R SSC1 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + initial condition detail: sta mode, join AP, DHCP on, will NOT autogen a TC with + initial condition STAAP2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 1 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC1 dhcp -S -o 1 + - [R SSC1 C +DHCP] + - - SSC SSC1 mac -S -o 1 -m + - ['R SSC1 C +MAC:STA,OK'] + - - SSC SSC1 sta -C -s -p + - ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%()'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 24.0 + tag: STAO2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:1'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: same as T2_1 but will NOT autogen a TC with initial condition + T2_2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 73.0 + tag: T2O_1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:2'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:1'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: target 1 as SoftAP, target 2 as STA, will autogen a TC + with initial condition T2_2 + restore cmd set: + - '' + - - SSC SSC1 op -S -o 2 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 1 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [''] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 73.0 + tag: T2_1 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC1 op -Q + - ['R SSC1 C +CURMODE:3'] + - - SSC SSC2 op -Q + - ['R SSC2 C +CURMODE:3'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -Q -o 2 + - ['R SSC1 C +DHCP:AP,STARTED'] + - - SSC SSC2 dhcp -Q -o 1 + - ['R SSC2 C +DHCP:STA,STARTED'] + - - SSC SSC1 mac -Q -o 2 + - [R SSC1 P ] + - - SSC SSC2 mac -Q -o 1 + - [R SSC2 P ] + force restore cmd set: + - '' + - - SSC SSC1 reboot + - [R SSC1 C !!!ready!!!] + - - SSC SSC2 reboot + - [R SSC2 C !!!ready!!!] + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 3 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + initial condition detail: target 1 as AP+STA, target 2 as AP+STA (autogen) + restore cmd set: + - '' + - - SSC SSC1 op -S -o 3 + - ['R SSC1 C +MODE:OK'] + - - SSC SSC2 op -S -o 3 + - ['R SSC2 C +MODE:OK'] + - - SSC SSC2 sta -D + - ['R SSC2 C +QAP:'] + - - SSC SSC2 soc -T + - [R SSC2 C +CLOSEALL] + - - SSC SSC1 dhcp -S -o 2 + - [R SSC1 C +DHCP] + - - SSC SSC2 dhcp -S -o 1 + - [R SSC2 C +DHCP] + - - SSC SSC1 mac -S -o 2 -m + - ['R SSC1 C +MAC:AP,OK'] + - - SSC SSC2 mac -S -o 1 -m + - ['R SSC2 C +MAC:STA,OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 ram + - ['R SSC1 C +FREEHEAP:'] + script path: InitCondBase.py + start: 80.0 + tag: T2_2 + test script: InitCondBase +- check cmd set: + - '' + - - SSC SSC[1-3] op -Q + - ['R SSC[1-3] C +CURMODE:3'] + - - SSC SSC[1-3] phy -Q -o 3 + - ['R SSC[1-3] C STA,n,40 C AP,n,40'] + force restore cmd set: + - '' + - - SSC SSC[1-3] reboot + - ['R SSC[1-3] C !!!ready!!!'] + - - SSC SSC[1-3] op -S -o 3 + - ['R SSC[1-3] C +MODE:OK'] + - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 + - ['R SSC[1-3] C +PHY:OK'] + initial condition detail: '1. target 1 and target 2 set to AP+STA mode, target 3 + set to STA mode + + 2. all interface of target 2,3 set to 11n ht40 + + 3. config softAP of target 1 and target 2' + restore cmd set: + - '' + - - SSC SSC[1-3] op -S -o 3 + - ['R SSC[1-3] C +MODE:OK'] + - - SSC SSC[1-3] phy -S -o 3 -m n -b 40 + - ['R SSC[1-3] C +PHY:OK'] + restore post cmd set: + - '' + - - SSC SSC1 soc -T + - [R SSC1 C +CLOSEALL] + - - SSC SSC1 sta -R -r 1 + - [R SSC1 C OK] + - - SSC SSC1 ram + - ['R SSC1 A :(\d+)'] + script path: InitCondBase.py + start: 87.0 + tag: T3_PHY1 + test script: InitCondBase diff --git a/components/idf_test/uint_test/TestCaseAll.yml b/components/idf_test/uint_test/TestCaseAll.yml new file mode 100644 index 0000000000..2b2c65e0bd --- /dev/null +++ b/components/idf_test/uint_test/TestCaseAll.yml @@ -0,0 +1 @@ +test cases: [] diff --git a/components/idf_test/uint_test/TestEnvAll.yml b/components/idf_test/uint_test/TestEnvAll.yml new file mode 100644 index 0000000000..afa6cb812a --- /dev/null +++ b/components/idf_test/uint_test/TestEnvAll.yml @@ -0,0 +1,275 @@ +test environment: +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_1, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_2, + test environment detail: 'PC has 1 WiFi NIC. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_3, + test environment detail: 'Able to access WAN after connect to AP. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_ADC, + test environment detail: 'PC has 1 wired NIC connected to AP. + + Analog input connect to AT1 TOUT. + + Multimeter connect to input, able to measure input voltage. + + 1 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_APC1, + test environment detail: "PC has 1 wired NIC connected to AP.\nPC has 1 wired NIC\ + \ connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply. \nPC has 1 WiFi NIC. \n1 AT target connect with PC by UART\ + \ (AT and LOG port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_APC2, + test environment detail: "Able to access WAN after connect to AP.\nPC has 1 wired\ + \ NIC connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply.\nPC has 1 WiFi NIC.\n1 AT target connect with PC by UART (AT\ + \ and LOG port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_HighSpeedUART, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 AT target connect with PC by high speed UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: AT_T1_SmartConfigIOT, + test environment detail: '1 AT target connect with PC by UART (AT and LOG port). + + PC has 1 wired NIC connect to Common AP. + + Several AP are placed near AT target. + + Several smart phone installed test APK are placed near AT target.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 AT target connect with PC by UART (AT and LOG port).', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_JAP, + test environment detail: "Several AP are placed near AT target.\nPC has 1 wired\ + \ NIC connected to APC (static IP within the same subnet with APC).\nAPC control\ + \ power supply for all APs. \n2 AT target connect with PC by UART (AT and LOG\ + \ port).", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_Sleep, + test environment detail: 'AP support DTIM placed with AT target. + + 2 AT target connect with PC by UART (AT and LOG port). + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of AT1. + + AT1''s light sleep wakeup pin and wakeup indication connect with AT2''s GPIO.', + test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: AT_T2_SmartConfig, + test environment detail: '2 AT target connect with PC by UART (AT and LOG port). + + PC has 1 WiFi NIC. + + One HT20 AP and One HT40 AP are placed near target.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: IR_T2_1, test environment detail: '[TBD] 本测试为非自动测试, 红外能够做到数据收发吻合即可通过', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: NVS_T1_1, + test environment detail: '1 NVS target connect with PC by UART. + + 1 SSC target connect with PC by UART. + + SSC2 GPIO connect to NVS1 power control pin.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: PWM_T1_1, test environment detail: "[TBD]\ + \ 1. PWM OS SDK 以及 Non-OS SDK的测试建议分开进行, 放在不同的文件夹, 防止文件命名混淆\n2. 分析CSV文件的Python脚本只能分析单个channel\ + \ \n3. 如果Init脚本打印\"Network Error\" 检查TCP Server是不是正常发送data", test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_1, + test environment detail: 'PC has 2 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_2, + test environment detail: 'Able to access WAN after connect to AP. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_8089, + test environment detail: 'PC has 1 wired NIC connected to AP. + + 1 8089 tablet able to run iperf test placed near SSC1. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_ADC, + test environment detail: 'PC has 1 wired NIC connected to AP. + + Analog input connect to SSC1 TOUT. + + Multimeter connect to input, able to measure input voltage. + + 1 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_APC, + test environment detail: "PC has 1 wired NIC connected to AP.\nPC has 1 wired NIC\ + \ connected to APC (static IP within the same subnet with APC). \nAPC control\ + \ AP power supply. \nPC has 1 WiFi NIC. \n1 SSC target connect with PC by UART.", + test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_Enterprise, + test environment detail: "AP use WPA2-Etherprise is placed near SSC1. \n1 SSC target\ + \ connect with PC by UART.", test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_IOT1, + test environment detail: 'PC has 1 WiFi NIC. + + 1 SSC target connect with PC by UART. + + AP todo IOT test are placed near SSC1.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T1_InitData, + test environment detail: '2 SSC target connect with PC by UART. + + SSC1 use 40M crystal oscillator. + + SSC2 use normal 26M crystal oscillator. + + SSC2 GPIO connect to SSC1 power control pin.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_ShieldBox, + test environment detail: 'refer to figure. + + All APs and APC should be set to the same IP subnet. + + PC wired NIC should set static IP address within the same subnet with AP. + + Must use onboard wired NIC.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_TempBox, + test environment detail: '1 SSC target connect with PC by UART. + + Put SSC target to temperature box.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: SSC_T1_Timer, test environment detail: '[TBD] + 通过串口工具调节Timer, 将GPIO_13端口连接到逻辑分析仪', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_VDD33, + test environment detail: '1 SSC target connect with PC by UART. + + Multimeter connect to VDD33, able to measure voltage.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T1_WEP, + test environment detail: '1 SSC target connect with PC by UART. + + One WEP share key AP placed near SSC1.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 2 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO1, test environment detail: '[TBD] 2个ESP_8266通过UART连到PC, ESP_8266的 + GPIO_6相连', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO2, test environment detail: '[TBD] 1. 2个ESP_8266通过UART连到PC, ESP_8266的 + GPIO_15通过面包板相连 + + 2. 可借助面包板, 将GPIO_15, 以及中断函数被打开的8266板的GPIO_2 相连', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: SSC_T2_GPIO3, test environment detail: '[TBD] 2个ESP_8266通过UART连到PC, ESP_8266之间需要测试的Target_GPIO相连', + test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_PhyMode, + test environment detail: '2 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with phy mode 11b, 11g, 11n HT20, 11n HT40. + + Put 4 APs near SSC targets.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_ShieldBox, + test environment detail: '2 SSC target connect with PC by UART. + + Put them to Shield box.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_Sleep1, + test environment detail: 'AP support DTIM placed with AT target. + + 2 SSC target connect with PC by UART. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of SSC1. + + SSC1''s light sleep wakeup pin and wakeup indication connect with AT2''s GPIO. + + SSC1''s XPD connect with RSTB.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_Sleep2, + test environment detail: 'AP support DTIM placed with AT target. + + 2 SSC target connect with PC by UART. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of SSC1. + + SSC1''s RSTB pin connect with AT2''s GPIO.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 2.0, script path: EnvBase.py, tag: SSC_T2_SmartConfig, + test environment detail: '2 SSC target connect with PC by UART. + + PC has 1 WiFi NIC. + + One HT20 AP and One HT40 AP are placed near target.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 3.0, script path: EnvBase.py, tag: SSC_T3_PhyMode, + test environment detail: '3 SSC target connect with PC by UART. + + PC has one WiFi NIC support capture wlan packet using libpcap. + + Set 4 AP with (HT20, channel1), (HT20, channel2), (HT40, channel1), (HT40, channel2). + + Put 4 APs near SSC targets.', test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 5.0, script path: EnvBase.py, tag: SSC_T5_1, + test environment detail: 5 SSC target connect with PC by UART., test script: EnvBase} +- {PC OS: '', Special: N, Target Count: 1.0, script path: EnvBase.py, tag: SSC_T6_1, + test environment detail: 'PC has 1 wired NIC connected to AP. + + PC has 1 WiFi NIC. + + 6 SSC target connect with PC by UART.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: TempSensor_T1_1, + test environment detail: 'Tempeture sensor target connect with PC by UART. + + AP support DTIM placed with AT target. + + Multimeter connect with PC via GPIB. + + Series multimeter between GND and VCC of TempSensor1. + + PC has 1 wired NIC connected to switch. + + APC, AP also connect with swtich. + + All devices connected with switch use the same IP subnet. + + APC control AP power supply.', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: SSC_1, additional param list: '', + basic param list: '', script path: EnvBase.py, tag: UART_T1_1, test environment detail: '[TBD] + 将ESP_8266通过UART连到PC', test script: EnvBase} +- {PC OS: '', Special: Y, Target Count: 1.0, UART ports: 'SSC1 + + SSC2', additional param list: '', basic param list: '', script path: EnvBase.py, + tag: UART_T1_2, test environment detail: '[TBD] ESP_8266通过UART_0通过USB, UART_1 TXD + 通过 TTLcable 连到PC', test script: EnvBase} +- {PC OS: linux, Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: WebServer_T1_1, + test environment detail: 'Web Server target connect with PC by UART. + + PC has 1 wired NIC connected to switch. + + APC, AP also connect with swtich. + + All devices connected with switch use same IP subnet. + + APC control AP power supply.', test script: EnvBase} +- {PC OS: linux, Special: Y, Target Count: 1.0, script path: EnvBase.py, tag: WebServer_T1_2, + test environment detail: 'Web Server target connect with PC by UART. + + 4 PC with WiFi NIC placed near WebServer1.', test script: EnvBase} diff --git a/components/lwip/api/sockets.c b/components/lwip/api/sockets.c index 91a5222e68..350847b57c 100755 --- a/components/lwip/api/sockets.c +++ b/components/lwip/api/sockets.c @@ -1442,8 +1442,15 @@ lwip_sendto(int s, const void *data, size_t size, int flags, #ifdef LWIP_ESP8266 /*fix the code for getting the UDP proto's remote information by liuh at 2014.8.27*/ if (NETCONNTYPE_GROUP(netconn_type(sock->conn)) == NETCONN_UDP){ - buf.addr.u_addr.ip4.addr = sock->conn->pcb.udp->remote_ip.u_addr.ip4.addr; - remote_port = sock->conn->pcb.udp->remote_port; + if(NETCONNTYPE_ISIPV6(netconn_type(sock->conn))) { + memcpy(&buf.addr.u_addr.ip6.addr, sock->conn->pcb.udp->remote_ip.u_addr.ip6.addr,16); + remote_port = sock->conn->pcb.udp->remote_port; + IP_SET_TYPE(&buf.addr, IPADDR_TYPE_V6); + } else { + buf.addr.u_addr.ip4.addr = sock->conn->pcb.udp->remote_ip.u_addr.ip4.addr; + remote_port = sock->conn->pcb.udp->remote_port; + IP_SET_TYPE(&buf.addr, IPADDR_TYPE_V4); + } } else { #endif remote_port = 0; diff --git a/make/common.mk b/make/common.mk index a515584a9b..14aa4074b3 100644 --- a/make/common.mk +++ b/make/common.mk @@ -23,19 +23,27 @@ summary := @echo details := @true endif -# Pseudo-target to handle the case where submodules need to be -# re-initialised. +# Pseudo-target to check a git submodule has been properly initialised # -# $(eval $(call SubmoduleRequiredForFiles,FILENAMES)) to create a target that -# automatically runs 'git submodule update --init' if those files -# are missing, and fails if this is not possible. -define SubmoduleRequiredForFiles +# $(eval $(call SubmoduleCheck,FILENAMES,SUBMODULE_PATH)) to create a target that +# automatically runs 'git submodule update --init SUBMODULE_PATH' if any of +# the files in FILENAMES are missing, and fails if this is not possible. +# +# Will also print a WARNING if the submodule at SUBMODULE_PATH appears +# to require an update. +define SubmoduleCheck $(1): - @echo "WARNING: Missing submodule for $$@..." + @echo "WARNING: Missing submodule $(2) for $$@..." $(Q) [ -d ${IDF_PATH}/.git ] || ( echo "ERROR: esp-idf must be cloned from git to work."; exit 1) $(Q) [ -x $(which git) ] || ( echo "ERROR: Need to run 'git submodule --init' in esp-idf root directory."; exit 1) @echo "Attempting 'git submodule update --init' in esp-idf root directory..." - cd ${IDF_PATH} && git submodule update --init + cd ${IDF_PATH} && git submodule update --init $(2) + +# Parse 'git submodule status' output for out-of-date submodule. +# Status output prefixes status line with '+' if the submodule commit doesn't match +ifneq ("$(shell cd ${IDF_PATH} && git submodule status $(2) | grep '^+')","") +$$(info WARNING: git submodule $2 may be out of date. Run 'git submodule update' to update.) +endif endef diff --git a/make/project.mk b/make/project.mk index 35dccaf248..d91165cfd7 100644 --- a/make/project.mk +++ b/make/project.mk @@ -165,7 +165,7 @@ CPPFLAGS = -DESP_PLATFORM -Og -g3 -Wpointer-arith -Werror -Wno-error=unused-func CFLAGS = $(CPPFLAGS) -std=gnu99 -g3 -fstrict-volatile-bitfields # CXXFLAGS uses by C++ only -CXXFLAGS = $(CPPFLAGS) -Og -std=gnu++11 -g3 -fno-exceptions -fstrict-volatile-bitfields +CXXFLAGS = $(CPPFLAGS) -Og -std=gnu++11 -g3 -fno-exceptions -fstrict-volatile-bitfields -fno-rtti export CFLAGS CPPFLAGS CXXFLAGS