alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

esp_rom: add esp32s3 rom headers

Browse Source
This commit is contained in:
morris 2020-06-11 21:35:28 +08:00
parent 9cc0f33ed5
commit be91b7c52e
20 changed files with 5426 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
components/esp_rom/include/esp32s3/rom/aes.h Normal file
View File

@ -0,0 +1,55 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#ifdef __cplusplus
extern "C" {
#endif
#define AES_BLOCK_SIZE (16)
enum AES_TYPE {
AES_ENC,
AES_DEC,
};
enum AES_BITS {
AES128,
AES192,
AES256
};
void ets_aes_enable(void);
void ets_aes_disable(void);
void ets_aes_set_endian(bool key_word_swap, bool key_byte_swap,
bool in_word_swap, bool in_byte_swap,
bool out_word_swap, bool out_byte_swap);
int ets_aes_setkey(enum AES_TYPE type, const void *key, enum AES_BITS bits);
int ets_aes_setkey_enc(const void *key, enum AES_BITS bits);
int ets_aes_setkey_dec(const void *key, enum AES_BITS bits);
void ets_aes_block(const void *input, void *output);
#ifdef __cplusplus
}
#endif

40
components/esp_rom/include/esp32s3/rom/bigint.h Normal file
View File

@ -0,0 +1,40 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#ifdef __cplusplus
extern "C" {
#endif
void ets_bigint_enable(void);
void ets_bigint_disable(void);
int ets_bigint_multiply(const uint32_t *x, const uint32_t *y, uint32_t len_words);
int ets_bigint_modmult(const uint32_t *x, const uint32_t *y, const uint32_t *m, uint32_t m_dash, const uint32_t *rb, uint32_t len_words);
int ets_bigint_modexp(const uint32_t *x, const uint32_t *y, const uint32_t *m, uint32_t m_dash, const uint32_t *rb, bool constant_time, uint32_t len_words);
void ets_bigint_wait_finish(void);
int ets_bigint_getz(uint32_t *z, uint32_t len_words);
#ifdef __cplusplus
}
#endif

1097
components/esp_rom/include/esp32s3/rom/cache.h Normal file
View File

File diff suppressed because it is too large Load Diff

122
components/esp_rom/include/esp32s3/rom/crc.h Normal file
View File

@ -0,0 +1,122 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup crc_apis, uart configuration and communication related apis
* @brief crc apis
*/
/** @addtogroup crc_apis
* @{
*/
/* Standard CRC8/16/32 algorithms. */
// CRC-8 x8+x2+x1+1 0x07
// CRC16-CCITT x16+x12+x5+1 1021 ISO HDLC, ITU X.25, V.34/V.41/V.42, PPP-FCS
// CRC32:
//G(x) = x32 +x26 + x23 + x22 + x16 + x12 + x11 + x10 + x8 + x7 + x5 + x4 + x2 + x1 + 1
//If your buf is not continuous, you can use the first result to be the second parameter.
/**
* @brief Crc32 value that is in little endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint32_t crc32_le(uint32_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc32 value that is in big endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint32_t crc32_be(uint32_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc16 value that is in little endian.
*
* @param uint16_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint16_t crc16_le(uint16_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc16 value that is in big endian.
*
* @param uint16_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint16_t crc16_be(uint16_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc8 value that is in little endian.
*
* @param uint8_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint8_t crc8_le(uint8_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc8 value that is in big endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*
* @param uint8_t const *buf : buffer to start calculate crc.
*
* @param uint32_t len : buffer length in byte.
*
* @return None
*/
uint8_t crc8_be(uint8_t crc, uint8_t const *buf, uint32_t len);
/**
* @}
*/
#ifdef __cplusplus
}
#endif

142
components/esp_rom/include/esp32s3/rom/digital_signature.h Normal file
View File

@ -0,0 +1,142 @@
// Copyright 2019-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#define ETS_DS_IV_LEN 16
/* Length of parameter 'C' stored in flash */
#define ETS_DS_C_LEN (12672 / 8)
/* Encrypted ETS data. Recommended to store in flash in this format.
*/
typedef struct {
/* RSA LENGTH register parameters
* (number of words in RSA key & operands, minus one).
*
* Max value 127 (for RSA 4096).
*
* This value must match the length field encrypted and stored in 'c',
* or invalid results will be returned. (The DS peripheral will
* always use the value in 'c', not this value, so an attacker can't
* alter the DS peripheral results this way, it will just truncate or
* extend the message and the resulting signature in software.)
*/
unsigned rsa_length;
/* IV value used to encrypt 'c' */
uint8_t iv[ETS_DS_IV_LEN];
/* Encrypted Digital Signature parameters. Result of AES-CBC encryption
of plaintext values. Includes an encrypted message digest.
*/
uint8_t c[ETS_DS_C_LEN];
} ets_ds_data_t;
typedef enum {
ETS_DS_OK,
ETS_DS_INVALID_PARAM, /* Supplied parameters are invalid */
ETS_DS_INVALID_KEY, /* HMAC peripheral failed to supply key */
ETS_DS_INVALID_PADDING, /* 'c' decrypted with invalid padding */
ETS_DS_INVALID_DIGEST, /* 'c' decrypted with invalid digest */
} ets_ds_result_t;
void ets_ds_enable(void);
void ets_ds_disable(void);
/*
* @brief Start signing a message (or padded message digest) using the Digital Signature peripheral
*
* - @param message Pointer to message (or padded digest) containing the message to sign. Should be
* (data->rsa_length + 1)*4 bytes long. @param data Pointer to DS data. Can be a pointer to data
* in flash.
*
* Caller must have already called ets_ds_enable() and ets_hmac_calculate_downstream() before calling
* this function, and is responsible for calling ets_ds_finish_sign() and then
* ets_hmac_invalidate_downstream() afterwards.
*
* @return ETS_DS_OK if signature is in progress, ETS_DS_INVALID_PARAM if param is invalid,
* EST_DS_INVALID_KEY if key or HMAC peripheral is configured incorrectly.
*/
ets_ds_result_t ets_ds_start_sign(const void *message, const ets_ds_data_t *data);
/*
* @brief Returns true if the DS peripheral is busy following a call to ets_ds_start_sign()
*
* A result of false indicates that a call to ets_ds_finish_sign() will not block.
*
* Only valid if ets_ds_enable() has been called.
*/
bool ets_ds_is_busy(void);
/* @brief Finish signing a message using the Digital Signature peripheral
*
* Must be called after ets_ds_start_sign(). Can use ets_ds_busy() to wait until
* peripheral is no longer busy.
*
* - @param signature Pointer to buffer to contain the signature. Should be
* (data->rsa_length + 1)*4 bytes long.
* - @param data Should match the 'data' parameter passed to ets_ds_start_sign()
*
* @param ETS_DS_OK if signing succeeded, ETS_DS_INVALID_PARAM if param is invalid,
* ETS_DS_INVALID_DIGEST or ETS_DS_INVALID_PADDING if there is a problem with the
* encrypted data digest or padding bytes (in case of ETS_DS_INVALID_PADDING, a
* digest is produced anyhow.)
*/
ets_ds_result_t ets_ds_finish_sign(void *signature, const ets_ds_data_t *data);
/* Plaintext parameters used by Digital Signature.
Not used for signing with DS peripheral, but can be encrypted
in-device by calling ets_ds_encrypt_params()
*/
typedef struct {
uint32_t Y[4096 / 32];
uint32_t M[4096 / 32];
uint32_t Rb[4096 / 32];
uint32_t M_prime;
uint32_t length;
} ets_ds_p_data_t;
typedef enum {
ETS_DS_KEY_HMAC, /* The HMAC key (as stored in efuse) */
ETS_DS_KEY_AES, /* The AES key (as derived from HMAC key by HMAC peripheral in downstream mode) */
} ets_ds_key_t;
/* @brief Encrypt DS parameters suitable for storing and later use with DS peripheral
*
* @param data Output buffer to store encrypted data, suitable for later use generating signatures.
* @param iv Pointer to 16 byte IV buffer, will be copied into 'data'. Should be randomly generated bytes each time.
* @param p_data Pointer to input plaintext key data. The expectation is this data will be deleted after this process is done and 'data' is stored.
* @param key Pointer to 32 bytes of key data. Type determined by key_type parameter. The expectation is the corresponding HMAC key will be stored to efuse and then permanently erased.
* @param key_type Type of key stored in 'key' (either the AES-256 DS key, or an HMAC DS key from which the AES DS key is derived using HMAC peripheral)
*
* @return ETS_DS_INVALID_PARAM if any parameter is invalid, or ETS_DS_OK if 'data' is successfully generated from the input parameters.
*/
ets_ds_result_t ets_ds_encrypt_params(ets_ds_data_t *data, const void *iv, const ets_ds_p_data_t *p_data, const void *key, ets_ds_key_t key_type);
#ifdef __cplusplus
}
#endif

391
components/esp_rom/include/esp32s3/rom/efuse.h Normal file
View File

@ -0,0 +1,391 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
/** \defgroup efuse_APIs efuse APIs
* @brief ESP32 efuse read/write APIs
* @attention
*
*/
/** @addtogroup efuse_APIs
* @{
*/
typedef enum {
ETS_EFUSE_KEY_PURPOSE_USER = 0,
ETS_EFUSE_KEY_PURPOSE_RESERVED = 1,
ETS_EFUSE_KEY_PURPOSE_XTS_AES_256_KEY_1 = 2,
ETS_EFUSE_KEY_PURPOSE_XTS_AES_256_KEY_2 = 3,
ETS_EFUSE_KEY_PURPOSE_XTS_AES_128_KEY = 4,
ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_ALL = 5,
ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_JTAG = 6,
ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_DIGITAL_SIGNATURE = 7,
ETS_EFUSE_KEY_PURPOSE_HMAC_UP = 8,
ETS_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST0 = 9,
ETS_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST1 = 10,
ETS_EFUSE_KEY_PURPOSE_SECURE_BOOT_DIGEST2 = 11,
ETS_EFUSE_KEY_PURPOSE_MAX,
} ets_efuse_purpose_t;
typedef enum {
ETS_EFUSE_BLOCK0 = 0,
ETS_EFUSE_MAC_SPI_SYS_0 = 1,
ETS_EFUSE_BLOCK_SYS_DATA = 2,
ETS_EFUSE_BLOCK_USR_DATA = 3,
ETS_EFUSE_BLOCK_KEY0 = 4,
ETS_EFUSE_BLOCK_KEY1 = 5,
ETS_EFUSE_BLOCK_KEY2 = 6,
ETS_EFUSE_BLOCK_KEY3 = 7,
ETS_EFUSE_BLOCK_KEY4 = 8,
ETS_EFUSE_BLOCK_KEY5 = 9,
ETS_EFUSE_BLOCK_KEY6 = 10,
ETS_EFUSE_BLOCK_MAX,
} ets_efuse_block_t;
/**
* @brief set timing accroding the apb clock, so no read error or write error happens.
*
* @param clock: apb clock in HZ, only accept 5M(in FPGA), 10M(in FPGA), 20M, 40M, 80M.
*
* @return : 0 if success, others if clock not accepted
*/
int ets_efuse_set_timing(uint32_t clock);
/**
* @brief Enable efuse subsystem. Called after reset. Doesn't need to be called again.
*/
void ets_efuse_start(void);
/**
* @brief Efuse read operation: copies data from physical efuses to efuse read registers.
*
* @param null
*
* @return : 0 if success, others if apb clock is not accepted
*/
int ets_efuse_read(void);
/**
* @brief Efuse write operation: Copies data from efuse write registers to efuse. Operates on a single block of efuses at a time.
*
* @note This function does not update read efuses, call ets_efuse_read() once all programming is complete.
*
* @return : 0 if success, others if apb clock is not accepted
*/
int ets_efuse_program(ets_efuse_block_t block);
/**
* @brief Set all Efuse program registers to zero.
*
* Call this before writing new data to the program registers.
*/
void ets_efuse_clear_program_registers(void);
/**
* @brief Program a block of key data to an efuse block
*
* @param key_block Block to read purpose for. Must be in range ETS_EFUSE_BLOCK_KEY0 to ETS_EFUSE_BLOCK_KEY6. Key block must be unused (@ref ets_efuse_key_block_unused).
* @param purpose Purpose to set for this key. Purpose must be already unset.
* @param data Pointer to data to write.
* @param data_len Length of data to write.
*
* @note This function also calls ets_efuse_program() for the specified block, and for block 0 (setting the purpose)
*/
int ets_efuse_write_key(ets_efuse_block_t key_block, ets_efuse_purpose_t purpose, const void *data, size_t data_len);
/* @brief Return the address of a particular efuse block's first read register
*
* @param block Index of efuse block to look up
*
* @return 0 if block is invalid, otherwise a numeric read register address
* of the first word in the block.
*/
uint32_t ets_efuse_get_read_register_address(ets_efuse_block_t block);
/**
* @brief Return the current purpose set for an efuse key block
*
* @param key_block Block to read purpose for. Must be in range ETS_EFUSE_BLOCK_KEY0 to ETS_EFUSE_BLOCK_KEY6.
*/
ets_efuse_purpose_t ets_efuse_get_key_purpose(ets_efuse_block_t key_block);
/**
* @brief Find a key block with the particular purpose set
*
* @param purpose Purpose to search for.
* @param[out] key_block Pointer which will be set to the key block if found. Can be NULL, if only need to test the key block exists.
* @return true if found, false if not found. If false, value at key_block pointer is unchanged.
*/
bool ets_efuse_find_purpose(ets_efuse_purpose_t purpose, ets_efuse_block_t *key_block);
/**
* Return true if the key block is unused, false otherwise.
*
* An unused key block is all zero content, not read or write protected,
* and has purpose 0 (ETS_EFUSE_KEY_PURPOSE_USER)
*
* @param key_block key block to check.
*
* @return true if key block is unused, false if key block or used
* or the specified block index is not a key block.
*/
bool ets_efuse_key_block_unused(ets_efuse_block_t key_block);
/**
* @brief Search for an unused key block and return the first one found.
*
* See @ref ets_efuse_key_block_unused for a description of an unused key block.
*
* @return First unused key block, or ETS_EFUSE_BLOCK_MAX if no unused key block is found.
*/
ets_efuse_block_t ets_efuse_find_unused_key_block(void);
/**
* @brief Return the number of unused efuse key blocks (0-6)
*/
unsigned ets_efuse_count_unused_key_blocks(void);
/**
* @brief Calculate Reed-Solomon Encoding values for a block of efuse data.
*
* @param data Pointer to data buffer (length 32 bytes)
* @param rs_values Pointer to write encoded data to (length 12 bytes)
*/
void ets_efuse_rs_calculate(const void *data, void *rs_values);
/**
* @brief Read spi flash pads configuration from Efuse
*
* @return
* - 0 for default SPI pins.
* - 1 for default HSPI pins.
* - Other values define a custom pin configuration mask. Pins are encoded as per the EFUSE_SPICONFIG_RET_SPICLK,
* EFUSE_SPICONFIG_RET_SPIQ, EFUSE_SPICONFIG_RET_SPID, EFUSE_SPICONFIG_RET_SPICS0, EFUSE_SPICONFIG_RET_SPIHD macros.
* WP pin (for quad I/O modes) is not saved in efuse and not returned by this function.
*/
uint32_t ets_efuse_get_spiconfig(void);
/**
* @brief Read spi flash wp pad from Efuse
*
* @return
* - 0x3f for invalid.
* - 0~46 is valid.
*/
uint32_t ets_efuse_get_wp_pad(void);
/**
* @brief Read opi flash pads configuration from Efuse
*
* @return
* - 0 for default SPI pins.
* - Other values define a custom pin configuration mask. From the LSB, every 6 bits represent a GPIO number which stand for:
* DQS, D4, D5, D6, D7 accordingly.
*/
uint32_t ets_efuse_get_opiconfig(void);
/**
* @brief Read if download mode disabled from Efuse
*
* @return
* - true for efuse disable download mode.
* - false for efuse doesn't disable download mode.
*/
bool ets_efuse_download_modes_disabled(void);
/**
* @brief Read if legacy spi flash boot mode disabled from Efuse
*
* @return
* - true for efuse disable legacy spi flash boot mode.
* - false for efuse doesn't disable legacy spi flash boot mode.
*/
bool ets_efuse_legacy_spi_boot_mode_disabled(void);
/**
* @brief Read if uart print control value from Efuse
*
* @return
* - 0 for uart force print.
* - 1 for uart print when GPIO46 is low when digital reset.
* 2 for uart print when GPIO46 is high when digital reset.
* 3 for uart force slient
*/
uint32_t ets_efuse_get_uart_print_control(void);
/**
* @brief Read which channel will used by ROM to print
*
* @return
* - 0 for UART0.
* - 1 for UART1.
*/
uint32_t ets_efuse_get_uart_print_channel(void);
/**
* @brief Read if usb download mode disabled from Efuse
*
* (Also returns true if security download mode is enabled, as this mode
* disables USB download.)
*
* @return
* - true for efuse disable usb download mode.
* - false for efuse doesn't disable usb download mode.
*/
bool ets_efuse_usb_download_mode_disabled(void);
/**
* @brief Read if tiny basic mode disabled from Efuse
*
* @return
* - true for efuse disable tiny basic mode.
* - false for efuse doesn't disable tiny basic mode.
*/
bool ets_efuse_tiny_basic_mode_disabled(void);
/**
* @brief Read if usb module disabled from Efuse
*
* @return
* - true for efuse disable usb module.
* - false for efuse doesn't disable usb module.
*/
bool ets_efuse_usb_module_disabled(void);
/**
* @brief Read if security download modes enabled from Efuse
*
* @return
* - true for efuse enable security download mode.
* - false for efuse doesn't enable security download mode.
*/
bool ets_efuse_security_download_modes_enabled(void);
/**
* @brief Return true if secure boot is enabled in EFuse
*/
bool ets_efuse_secure_boot_enabled(void);
/**
* @brief Return true if secure boot aggressive revoke is enabled in EFuse
*/
bool ets_efuse_secure_boot_aggressive_revoke_enabled(void);
/**
* @brief Return true if cache encryption (flash, PSRAM, etc) is enabled from boot via EFuse
*/
bool ets_efuse_cache_encryption_enabled(void);
/**
* @brief Return true if EFuse indicates an external phy needs to be used for USB
*/
bool ets_efuse_usb_use_ext_phy(void);
/**
* @brief Return true if EFuse indicates USB device persistence is disabled
*/
bool ets_efuse_usb_force_nopersist(void);
/**
* @brief Return true if OPI pins GPIO33-37 are powered by VDDSPI, otherwise by VDD33CPU
*/
bool ets_efuse_flash_opi_5pads_power_sel_vddspi(void);
/**
* @brief Return true if EFuse indicates an opi flash is attached.
*/
bool ets_efuse_flash_opi_mode(void);
/**
* @brief Return true if EFuse indicates to send a flash resume command.
*/
bool ets_efuse_force_send_resume(void);
/**
* @brief return the time in us ROM boot need wait flash to power on from Efuse
*
* @return
* - uint32_t the time in us.
*/
uint32_t ets_efuse_get_flash_delay_us(void);
#define EFUSE_SPICONFIG_SPI_DEFAULTS 0
#define EFUSE_SPICONFIG_HSPI_DEFAULTS 1
#define EFUSE_SPICONFIG_RET_SPICLK_MASK 0x3f
#define EFUSE_SPICONFIG_RET_SPICLK_SHIFT 0
#define EFUSE_SPICONFIG_RET_SPICLK(ret) (((ret) >> EFUSE_SPICONFIG_RET_SPICLK_SHIFT) & EFUSE_SPICONFIG_RET_SPICLK_MASK)
#define EFUSE_SPICONFIG_RET_SPIQ_MASK 0x3f
#define EFUSE_SPICONFIG_RET_SPIQ_SHIFT 6
#define EFUSE_SPICONFIG_RET_SPIQ(ret) (((ret) >> EFUSE_SPICONFIG_RET_SPIQ_SHIFT) & EFUSE_SPICONFIG_RET_SPIQ_MASK)
#define EFUSE_SPICONFIG_RET_SPID_MASK 0x3f
#define EFUSE_SPICONFIG_RET_SPID_SHIFT 12
#define EFUSE_SPICONFIG_RET_SPID(ret) (((ret) >> EFUSE_SPICONFIG_RET_SPID_SHIFT) & EFUSE_SPICONFIG_RET_SPID_MASK)
#define EFUSE_SPICONFIG_RET_SPICS0_MASK 0x3f
#define EFUSE_SPICONFIG_RET_SPICS0_SHIFT 18
#define EFUSE_SPICONFIG_RET_SPICS0(ret) (((ret) >> EFUSE_SPICONFIG_RET_SPICS0_SHIFT) & EFUSE_SPICONFIG_RET_SPICS0_MASK)
#define EFUSE_SPICONFIG_RET_SPIHD_MASK 0x3f
#define EFUSE_SPICONFIG_RET_SPIHD_SHIFT 24
#define EFUSE_SPICONFIG_RET_SPIHD(ret) (((ret) >> EFUSE_SPICONFIG_RET_SPIHD_SHIFT) & EFUSE_SPICONFIG_RET_SPIHD_MASK)
/**
* @brief Enable JTAG temporarily by writing a JTAG HMAC "key" into
* the JTAG_CTRL registers.
*
* Works if JTAG has been "soft" disabled by burning the EFUSE_SOFT_DIS_JTAG efuse.
*
* Will enable the HMAC module to generate a "downstream" HMAC value from a key already saved in efuse, and then write the JTAG HMAC "key" which will enable JTAG if the two keys match.
*
* @param jtag_hmac_key Pointer to a 32 byte array containing a valid key. Supplied by user.
* @param key_block Index of a key block containing the source for this key.
*
* @return ETS_FAILED if HMAC operation fails or invalid parameter, ETS_OK otherwise. ETS_OK doesn't necessarily mean that JTAG was enabled.
*/
int ets_jtag_enable_temporarily(const uint8_t *jtag_hmac_key, ets_efuse_block_t key_block);
/**
* @brief A crc8 algorithm used for MAC addresses in efuse
*
* @param unsigned char const *p : Pointer to original data.
*
* @param unsigned int len : Data length in byte.
*
* @return unsigned char: Crc value.
*/
unsigned char esp_crc8(unsigned char const *p, unsigned int len);
/**
* @}
*/
#ifdef __cplusplus
}
#endif

654
components/esp_rom/include/esp32s3/rom/ets_sys.h Normal file
View File

@ -0,0 +1,654 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup ets_sys_apis, ets system related apis
* @brief ets system apis
*/
/** @addtogroup ets_sys_apis
* @{
*/
/************************************************************************
* NOTE
* Many functions in this header files can't be run in FreeRTOS.
* Please see the comment of the Functions.
* There are also some functions that doesn't work on FreeRTOS
* without listed in the header, such as:
* xtos functions start with "_xtos_" in ld file.
*
***********************************************************************
*/
/** \defgroup ets_apis, Espressif Task Scheduler related apis
* @brief ets apis
*/
/** @addtogroup ets_apis
* @{
*/
typedef enum {
ETS_OK = 0, /**< return successful in ets*/
ETS_FAILED = 1 /**< return failed in ets*/
} ETS_STATUS;
typedef ETS_STATUS ets_status_t;
typedef uint32_t ETSSignal;
typedef uint32_t ETSParam;
typedef struct ETSEventTag ETSEvent; /**< Event transmit/receive in ets*/
struct ETSEventTag {
ETSSignal sig; /**< Event signal, in same task, different Event with different signal*/
ETSParam par; /**< Event parameter, sometimes without usage, then will be set as 0*/
};
typedef void (*ETSTask)(ETSEvent *e); /**< Type of the Task processer*/
typedef void (* ets_idle_cb_t)(void *arg); /**< Type of the system idle callback*/
/**
* @brief Start the Espressif Task Scheduler, which is an infinit loop. Please do not add code after it.
*
* @param none
*
* @return none
*/
void ets_run(void);
/**
* @brief Set the Idle callback, when Tasks are processed, will call the callback before CPU goto sleep.
*
* @param ets_idle_cb_t func : The callback function.
*
* @param void *arg : Argument of the callback.
*
* @return None
*/
void ets_set_idle_cb(ets_idle_cb_t func, void *arg);
/**
* @brief Init a task with processer, priority, queue to receive Event, queue length.
*
* @param ETSTask task : The task processer.
*
* @param uint8_t prio : Task priority, 0-31, bigger num with high priority, one priority with one task.
*
* @param ETSEvent *queue : Queue belongs to the task, task always receives Events, Queue is circular used.
*
* @param uint8_t qlen : Queue length.
*
* @return None
*/
void ets_task(ETSTask task, uint8_t prio, ETSEvent *queue, uint8_t qlen);
/**
* @brief Post an event to an Task.
*
* @param uint8_t prio : Priority of the Task.
*
* @param ETSSignal sig : Event signal.
*
* @param ETSParam par : Event parameter
*
* @return ETS_OK : post successful
* @return ETS_FAILED : post failed
*/
ETS_STATUS ets_post(uint8_t prio, ETSSignal sig, ETSParam par);
/**
* @}
*/
/** \defgroup ets_boot_apis, Boot routing related apis
* @brief ets boot apis
*/
/** @addtogroup ets_apis
* @{
*/
extern const char *const exc_cause_table[40]; ///**< excption cause that defined by the core.*/
/**
* @brief Set Pro cpu Entry code, code can be called in PRO CPU when booting is not completed.
* When Pro CPU booting is completed, Pro CPU will call the Entry code if not NULL.
*
* @param uint32_t start : the PRO Entry code address value in uint32_t
*
* @return None
*/
void ets_set_user_start(uint32_t start);
/**
* @brief Set Pro cpu Startup code, code can be called when booting is not completed, or in Entry code.
* When Entry code completed, CPU will call the Startup code if not NULL, else call ets_run.
*
* @param uint32_t callback : the Startup code address value in uint32_t
*
* @return None : post successful
*/
void ets_set_startup_callback(uint32_t callback);
/**
* @brief Set App cpu Entry code, code can be called in PRO CPU.
* When APP booting is completed, APP CPU will call the Entry code if not NULL.
*
* @param uint32_t start : the APP Entry code address value in uint32_t, stored in register APPCPU_CTRL_REG_D.
*
* @return None
*/
void ets_set_appcpu_boot_addr(uint32_t start);
/**
* @}
*/
/** \defgroup ets_printf_apis, ets_printf related apis used in ets
* @brief ets printf apis
*/
/** @addtogroup ets_printf_apis
* @{
*/
/**
* @brief Printf the strings to uart or other devices, similar with printf, simple than printf.
* Can not print float point data format, or longlong data format.
* So we maybe only use this in ROM.
*
* @param const char *fmt : See printf.
*
* @param ... : See printf.
*
* @return int : the length printed to the output device.
*/
int ets_printf(const char *fmt, ...);
/**
* @brief Set the uart channel of ets_printf(uart_tx_one_char).
* ROM will set it base on the efuse and gpio setting, however, this can be changed after booting.
*
* @param uart_no : 0 for UART0, 1 for UART1, 2 for UART2.
*
* @return None
*/
void ets_set_printf_channel(uint8_t uart_no);
/**
* @brief Get the uart channel of ets_printf(uart_tx_one_char).
*
* @return uint8_t uart channel used by ets_printf(uart_tx_one_char).
*/
uint8_t ets_get_printf_channel(void);
/**
* @brief Output a char to uart, which uart to output(which is in uart module in ROM) is not in scope of the function.
* Can not print float point data format, or longlong data format
*
* @param char c : char to output.
*
* @return None
*/
void ets_write_char_uart(char c);
/**
* @brief Ets_printf have two output functions： putc1 and putc2, both of which will be called if need ouput.
* To install putc1, which is defaulted installed as ets_write_char_uart in none silent boot mode, as NULL in silent mode.
*
* @param void (*)(char) p: Output function to install.
*
* @return None
*/
void ets_install_putc1(void (*p)(char c));
/**
* @brief Ets_printf have two output functions： putc1 and putc2, both of which will be called if need ouput.
* To install putc2, which is defaulted installed as NULL.
*
* @param void (*)(char) p: Output function to install.
*
* @return None
*/
void ets_install_putc2(void (*p)(char c));
/**
* @brief Install putc1 as ets_write_char_uart.
* In silent boot mode(to void interfere the UART attached MCU), we can call this function, after booting ok.
*
* @param None
*
* @return None
*/
void ets_install_uart_printf(void);
#define ETS_PRINTF(...) ets_printf(...)
#define ETS_ASSERT(v) do { \
if (!(v)) { \
ets_printf("%s %u \n", __FILE__, __LINE__); \
while (1) {}; \
} \
} while (0);
/**
* @}
*/
/** \defgroup ets_timer_apis, ets_timer related apis used in ets
* @brief ets timer apis
*/
/** @addtogroup ets_timer_apis
* @{
*/
typedef void ETSTimerFunc(void *timer_arg);/**< timer handler*/
typedef struct _ETSTIMER_ {
struct _ETSTIMER_ *timer_next; /**< timer linker*/
uint32_t timer_expire; /**< abstruct time when timer expire*/
uint32_t timer_period; /**< timer period, 0 means timer is not periodic repeated*/
ETSTimerFunc *timer_func; /**< timer handler*/
void *timer_arg; /**< timer handler argument*/
} ETSTimer;
/**
* @brief Init ets timer, this timer range is 640 us to 429496 ms
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param None
*
* @return None
*/
void ets_timer_init(void);
/**
* @brief In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param None
*
* @return None
*/
void ets_timer_deinit(void);
/**
* @brief Arm an ets timer, this timer range is 640 us to 429496 ms.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param ETSTimer *timer : Timer struct pointer.
*
* @param uint32_t tmout : Timer value in ms, range is 1 to 429496.
*
* @param bool repeat : Timer is periodic repeated.
*
* @return None
*/
void ets_timer_arm(ETSTimer *timer, uint32_t tmout, bool repeat);
/**
* @brief Arm an ets timer, this timer range is 640 us to 429496 ms.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param ETSTimer *timer : Timer struct pointer.
*
* @param uint32_t tmout : Timer value in us, range is 1 to 429496729.
*
* @param bool repeat : Timer is periodic repeated.
*
* @return None
*/
void ets_timer_arm_us(ETSTimer *ptimer, uint32_t us, bool repeat);
/**
* @brief Disarm an ets timer.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param ETSTimer *timer : Timer struct pointer.
*
* @return None
*/
void ets_timer_disarm(ETSTimer *timer);
/**
* @brief Set timer callback and argument.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param ETSTimer *timer : Timer struct pointer.
*
* @param ETSTimerFunc *pfunction : Timer callback.
*
* @param void *parg : Timer callback argument.
*
* @return None
*/
void ets_timer_setfn(ETSTimer *ptimer, ETSTimerFunc *pfunction, void *parg);
/**
* @brief Unset timer callback and argument to NULL.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param ETSTimer *timer : Timer struct pointer.
*
* @return None
*/
void ets_timer_done(ETSTimer *ptimer);
/**
* @brief CPU do while loop for some time.
* In FreeRTOS task, please call FreeRTOS apis.
*
* @param uint32_t us : Delay time in us.
*
* @return None
*/
void ets_delay_us(uint32_t us);
/**
* @brief Set the real CPU ticks per us to the ets, so that ets_delay_us will be accurate.
* Call this function when CPU frequency is changed.
*
* @param uint32_t ticks_per_us : CPU ticks per us.
*
* @return None
*/
void ets_update_cpu_frequency(uint32_t ticks_per_us);
/**
* @brief Set the real CPU ticks per us to the ets, so that ets_delay_us will be accurate.
*
* @note This function only sets the tick rate for the current CPU. It is located in ROM,
* so the deep sleep stub can use it even if IRAM is not initialized yet.
*
* @param uint32_t ticks_per_us : CPU ticks per us.
*
* @return None
*/
void ets_update_cpu_frequency_rom(uint32_t ticks_per_us);
/**
* @brief Get the real CPU ticks per us to the ets.
* This function do not return real CPU ticks per us, just the record in ets. It can be used to check with the real CPU frequency.
*
* @param None
*
* @return uint32_t : CPU ticks per us record in ets.
*/
uint32_t ets_get_cpu_frequency(void);
/**
* @brief Get xtal_freq value, If value not stored in RTC_STORE5, than store.
*
* @param None
*
* @return uint32_t : if stored in efuse(not 0)
* clock = ets_efuse_get_xtal_freq() * 1000000;
* else if analog_8M in efuse
* clock = ets_get_xtal_scale() * 625 / 16 * ets_efuse_get_8M_clock();
* else clock = 40M.
*/
uint32_t ets_get_xtal_freq(void);
/**
* @brief Get the apb divisor. The xtal frequency gets divided
* by this value to generate the APB clock.
* When any types of reset happens, the default value is 2.
*
* @param None
*
* @return uint32_t : 1 or 2.
*/
uint32_t ets_get_xtal_div(void);
/**
* @brief Modifies the apb divisor. The xtal frequency gets divided by this to
* generate the APB clock.
*
* @note The xtal frequency divisor is 2 by default as the glitch detector
* doesn't properly stop glitches when it is 1. Please do not set the
* divisor to 1 before the PLL is active without being aware that you
* may be introducing a security risk.
*
* @param div Divisor. 1 = xtal freq, 2 = 1/2th xtal freq.
*/
void ets_set_xtal_div(int div);
/**
* @brief Get apb_freq value, If value not stored in RTC_STORE5, than store.
*
* @param None
*
* @return uint32_t : if rtc store the value (RTC_STORE5 high 16 bits and low 16 bits with same value), read from rtc register.
* clock = (REG_READ(RTC_STORE5) & 0xffff) << 12;
* else store ets_get_detected_xtal_freq() in.
*/
uint32_t ets_get_apb_freq(void);
/**
* @}
*/
/** \defgroup ets_intr_apis, ets interrupt configure related apis
* @brief ets intr apis
*/
/** @addtogroup ets_intr_apis
* @{
*/
typedef void (* ets_isr_t)(void *);/**< interrupt handler type*/
/**
* @brief Attach a interrupt handler to a CPU interrupt number.
* This function equals to _xtos_set_interrupt_handler_arg(i, func, arg).
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param int i : CPU interrupt number.
*
* @param ets_isr_t func : Interrupt handler.
*
* @param void *arg : argument of the handler.
*
* @return None
*/
void ets_isr_attach(int i, ets_isr_t func, void *arg);
/**
* @brief Mask the interrupts which show in mask bits.
* This function equals to _xtos_ints_off(mask).
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param uint32_t mask : BIT(i) means mask CPU interrupt number i.
*
* @return None
*/
void ets_isr_mask(uint32_t mask);
/**
* @brief Unmask the interrupts which show in mask bits.
* This function equals to _xtos_ints_on(mask).
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param uint32_t mask : BIT(i) means mask CPU interrupt number i.
*
* @return None
*/
void ets_isr_unmask(uint32_t unmask);
/**
* @brief Lock the interrupt to level 2.
* This function direct set the CPU registers.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param None
*
* @return None
*/
void ets_intr_lock(void);
/**
* @brief Unlock the interrupt to level 0.
* This function direct set the CPU registers.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param None
*
* @return None
*/
void ets_intr_unlock(void);
/**
* @brief Unlock the interrupt to level 0, and CPU will go into power save mode(wait interrupt).
* This function direct set the CPU registers.
* In FreeRTOS, please call FreeRTOS apis, never call this api.
*
* @param None
*
* @return None
*/
void ets_waiti0(void);
/**
* @brief Attach an CPU interrupt to a hardware source.
* We have 4 steps to use an interrupt:
* 1.Attach hardware interrupt source to CPU. intr_matrix_set(0, ETS_WIFI_MAC_INTR_SOURCE, ETS_WMAC_INUM);
* 2.Set interrupt handler. xt_set_interrupt_handler(ETS_WMAC_INUM, func, NULL);
* 3.Enable interrupt for CPU. xt_ints_on(1 << ETS_WMAC_INUM);
* 4.Enable interrupt in the module.
*
* @param int cpu_no : The CPU which the interrupt number belongs.
*
* @param uint32_t model_num : The interrupt hardware source number, please see the interrupt hardware source table.
*
* @param uint32_t intr_num : The interrupt number CPU, please see the interrupt cpu using table.
*
* @return None
*/
void intr_matrix_set(int cpu_no, uint32_t model_num, uint32_t intr_num);
#define _ETSTR(v) # v
#define _ETS_SET_INTLEVEL(intlevel) ({ unsigned __tmp; \
__asm__ __volatile__( "rsil %0, " _ETSTR(intlevel) "\n" \
: "=a" (__tmp) : : "memory" ); \
})
#ifdef CONFIG_NONE_OS
#define ETS_INTR_LOCK() \
ets_intr_lock()
#define ETS_INTR_UNLOCK() \
ets_intr_unlock()
#define ETS_ISR_ATTACH \
ets_isr_attach
#define ETS_INTR_ENABLE(inum) \
ets_isr_unmask((1<<inum))
#define ETS_INTR_DISABLE(inum) \
ets_isr_mask((1<<inum))
#define ETS_WMAC_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_WMAC_INUM, (func), (void *)(arg))
#define ETS_TG0_T0_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_TG0_T0_INUM, (func), (void *)(arg))
#define ETS_GPIO_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_GPIO_INUM, (func), (void *)(arg))
#define ETS_UART0_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_UART0_INUM, (func), (void *)(arg))
#define ETS_WDT_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_WDT_INUM, (func), (void *)(arg))
#define ETS_SLC_INTR_ATTACH(func, arg) \
ETS_ISR_ATTACH(ETS_SLC_INUM, (func), (void *)(arg))
#define ETS_BB_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_BB_INUM)
#define ETS_BB_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_BB_INUM)
#define ETS_UART0_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_UART0_INUM)
#define ETS_UART0_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_UART0_INUM)
#define ETS_GPIO_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_GPIO_INUM)
#define ETS_GPIO_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_GPIO_INUM)
#define ETS_WDT_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_WDT_INUM)
#define ETS_WDT_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_WDT_INUM)
#define ETS_TG0_T0_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_TG0_T0_INUM)
#define ETS_TG0_T0_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_TG0_T0_INUM)
#define ETS_SLC_INTR_ENABLE() \
ETS_INTR_ENABLE(ETS_SLC_INUM)
#define ETS_SLC_INTR_DISABLE() \
ETS_INTR_DISABLE(ETS_SLC_INUM)
#endif
/**
* @}
*/
#ifndef MAC2STR
#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
#endif
#define ETS_MEM_BAR() asm volatile ( "" : : : "memory" )
typedef enum {
OK = 0,
FAIL,
PENDING,
BUSY,
CANCEL,
} STATUS;
/**
* @}
*/
#ifdef __cplusplus
}
#endif

306
components/esp_rom/include/esp32s3/rom/gpio.h Normal file
View File

@ -0,0 +1,306 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/gpio_reg.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup gpio_apis, uart configuration and communication related apis
* @brief gpio apis
*/
/** @addtogroup gpio_apis
* @{
*/
#define GPIO_REG_READ(reg) READ_PERI_REG(reg)
#define GPIO_REG_WRITE(reg, val) WRITE_PERI_REG(reg, val)
#define GPIO_ID_PIN0 0
#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n))
#define GPIO_PIN_ADDR(i) (GPIO_PIN0_REG + i*4)
#define GPIO_FUNC_IN_HIGH 0x38
#define GPIO_FUNC_IN_LOW 0x3C
#define GPIO_ID_IS_PIN_REGISTER(reg_id) \
((reg_id >= GPIO_ID_PIN0) && (reg_id <= GPIO_ID_PIN(GPIO_PIN_COUNT-1)))
#define GPIO_REGID_TO_PINIDX(reg_id) ((reg_id) - GPIO_ID_PIN0)
typedef enum {
GPIO_PIN_INTR_DISABLE = 0,
GPIO_PIN_INTR_POSEDGE = 1,
GPIO_PIN_INTR_NEGEDGE = 2,
GPIO_PIN_INTR_ANYEDGE = 3,
GPIO_PIN_INTR_LOLEVEL = 4,
GPIO_PIN_INTR_HILEVEL = 5
} GPIO_INT_TYPE;
#define GPIO_OUTPUT_SET(gpio_no, bit_value) \
((gpio_no < 32) ? gpio_output_set(bit_value<<gpio_no, (bit_value ? 0 : 1)<<gpio_no, 1<<gpio_no,0) : \
gpio_output_set_high(bit_value<<(gpio_no - 32), (bit_value ? 0 : 1)<<(gpio_no - 32), 1<<(gpio_no -32),0))
#define GPIO_DIS_OUTPUT(gpio_no) ((gpio_no < 32) ? gpio_output_set(0,0,0, 1<<gpio_no) : gpio_output_set_high(0,0,0, 1<<(gpio_no - 32)))
#define GPIO_INPUT_GET(gpio_no) ((gpio_no < 32) ? ((gpio_input_get()>>gpio_no)&BIT0) : ((gpio_input_get_high()>>(gpio_no - 32))&BIT0))
/* GPIO interrupt handler, registered through gpio_intr_handler_register */
typedef void (* gpio_intr_handler_fn_t)(uint32_t intr_mask, bool high, void *arg);
/**
* @brief Initialize GPIO. This includes reading the GPIO Configuration DataSet
* to initialize "output enables" and pin configurations for each gpio pin.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void gpio_init(void);
/**
* @brief Change GPIO(0-31) pin output by setting, clearing, or disabling pins, GPIO0<->BIT(0).
* There is no particular ordering guaranteed; so if the order of writes is significant,
* calling code should divide a single call into multiple calls.
*
* @param uint32_t set_mask : the gpios that need high level.
*
* @param uint32_t clear_mask : the gpios that need low level.
*
* @param uint32_t enable_mask : the gpios that need be changed.
*
* @param uint32_t disable_mask : the gpios that need diable output.
*
* @return None
*/
void gpio_output_set(uint32_t set_mask, uint32_t clear_mask, uint32_t enable_mask, uint32_t disable_mask);
/**
* @brief Change GPIO(32-39) pin output by setting, clearing, or disabling pins, GPIO32<->BIT(0).
* There is no particular ordering guaranteed; so if the order of writes is significant,
* calling code should divide a single call into multiple calls.
*
* @param uint32_t set_mask : the gpios that need high level.
*
* @param uint32_t clear_mask : the gpios that need low level.
*
* @param uint32_t enable_mask : the gpios that need be changed.
*
* @param uint32_t disable_mask : the gpios that need diable output.
*
* @return None
*/
void gpio_output_set_high(uint32_t set_mask, uint32_t clear_mask, uint32_t enable_mask, uint32_t disable_mask);
/**
* @brief Sample the value of GPIO input pins(0-31) and returns a bitmask.
*
* @param None
*
* @return uint32_t : bitmask for GPIO input pins, BIT(0) for GPIO0.
*/
uint32_t gpio_input_get(void);
/**
* @brief Sample the value of GPIO input pins(32-39) and returns a bitmask.
*
* @param None
*
* @return uint32_t : bitmask for GPIO input pins, BIT(0) for GPIO32.
*/
uint32_t gpio_input_get_high(void);
/**
* @brief Register an application-specific interrupt handler for GPIO pin interrupts.
* Once the interrupt handler is called, it will not be called again until after a call to gpio_intr_ack.
* Please do not call this function in SDK.
*
* @param gpio_intr_handler_fn_t fn : gpio application-specific interrupt handler
*
* @param void *arg : gpio application-specific interrupt handler argument.
*
* @return None
*/
void gpio_intr_handler_register(gpio_intr_handler_fn_t fn, void *arg);
/**
* @brief Get gpio interrupts which happens but not processed.
* Please do not call this function in SDK.
*
* @param None
*
* @return uint32_t : bitmask for GPIO pending interrupts, BIT(0) for GPIO0.
*/
uint32_t gpio_intr_pending(void);
/**
* @brief Get gpio interrupts which happens but not processed.
* Please do not call this function in SDK.
*
* @param None
*
* @return uint32_t : bitmask for GPIO pending interrupts, BIT(0) for GPIO32.
*/
uint32_t gpio_intr_pending_high(void);
/**
* @brief Ack gpio interrupts to process pending interrupts.
* Please do not call this function in SDK.
*
* @param uint32_t ack_mask: bitmask for GPIO ack interrupts, BIT(0) for GPIO0.
*
* @return None
*/
void gpio_intr_ack(uint32_t ack_mask);
/**
* @brief Ack gpio interrupts to process pending interrupts.
* Please do not call this function in SDK.
*
* @param uint32_t ack_mask: bitmask for GPIO ack interrupts, BIT(0) for GPIO32.
*
* @return None
*/
void gpio_intr_ack_high(uint32_t ack_mask);
/**
* @brief Set GPIO to wakeup the ESP32.
* Please do not call this function in SDK.
*
* @param uint32_t i: gpio number.
*
* @param GPIO_INT_TYPE intr_state : only GPIO_PIN_INTR_LOLEVEL\GPIO_PIN_INTR_HILEVEL can be used
*
* @return None
*/
void gpio_pin_wakeup_enable(uint32_t i, GPIO_INT_TYPE intr_state);
/**
* @brief disable GPIOs to wakeup the ESP32.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void gpio_pin_wakeup_disable(void);
/**
* @brief set gpio input to a signal, one gpio can input to several signals.
*
* @param uint32_t gpio : gpio number, 0~0x2f
* gpio == 0x3C, input 0 to signal
* gpio == 0x3A, input nothing to signal
* gpio == 0x38, input 1 to signal
*
* @param uint32_t signal_idx : signal index.
*
* @param bool inv : the signal is inv or not
*
* @return None
*/
void gpio_matrix_in(uint32_t gpio, uint32_t signal_idx, bool inv);
/**
* @brief set signal output to gpio, one signal can output to several gpios.
*
* @param uint32_t gpio : gpio number, 0~0x2f
*
* @param uint32_t signal_idx : signal index.
* signal_idx == 0x100, cancel output put to the gpio
*
* @param bool out_inv : the signal output is invert or not
*
* @param bool oen_inv : the signal output enable is invert or not
*
* @return None
*/
void gpio_matrix_out(uint32_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv);
/**
* @brief Select pad as a gpio function from IOMUX.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_select_gpio(uint32_t gpio_num);
/**
* @brief Set pad driver capability.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @param uint32_t drv : 0-3
*
* @return None
*/
void gpio_pad_set_drv(uint32_t gpio_num, uint32_t drv);
/**
* @brief Pull up the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_pullup(uint32_t gpio_num);
/**
* @brief Pull down the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_pulldown(uint32_t gpio_num);
/**
* @brief Unhold the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_unhold(uint32_t gpio_num);
/**
* @brief Hold the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_hold(uint32_t gpio_num);
/**
* @brief enable gpio pad input.
*
* @param uint32_t gpio_num : gpio number, 0~0x2f
*
* @return None
*/
void gpio_pad_input_enable(uint32_t gpio_num);
/**
* @}
*/
#ifdef __cplusplus
}
#endif

59
components/esp_rom/include/esp32s3/rom/hmac.h Normal file
View File

@ -0,0 +1,59 @@
// Copyright 2018-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "efuse.h"
void ets_hmac_enable(void);
void ets_hmac_disable(void);
/* Use the "upstream" HMAC key (ETS_EFUSE_KEY_PURPOSE_HMAC_UP)
to digest a message.
*/
int ets_hmac_calculate_message(ets_efuse_block_t key_block, const void *message, size_t message_len, uint8_t *hmac);
/* Calculate a downstream HMAC message to temporarily enable JTAG, or
to generate a Digital Signature data decryption key.
- purpose must be ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_DIGITAL_SIGNATURE
or ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_JTAG
- key_block must be in range ETS_EFUSE_BLOCK_KEY0 toETS_EFUSE_BLOCK_KEY6.
This efuse block must have the corresponding purpose set in "purpose", or
ETS_EFUSE_KEY_PURPOSE_HMAC_DOWN_ALL.
The result of this HMAC calculation is only made available "downstream" to the
corresponding hardware module, and cannot be accessed by software.
*/
int ets_hmac_calculate_downstream(ets_efuse_block_t key_block, ets_efuse_purpose_t purpose);
/* Invalidate a downstream HMAC value previously calculated by ets_hmac_calculate_downstream().
*
* - purpose must match a previous call to ets_hmac_calculate_downstream().
*
* After this function is called, the corresponding internal operation (JTAG or DS) will no longer
* have access to the generated key.
*/
int ets_hmac_invalidate_downstream(ets_efuse_purpose_t purpose);
#ifdef __cplusplus
}
#endif

87
components/esp_rom/include/esp32s3/rom/libc_stubs.h Normal file
View File

@ -0,0 +1,87 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <stdarg.h>
#include <reent.h>
#include <errno.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief ESP32-S3 ROM code contains implementations of some of C library functions.
* Whenever a function in ROM needs to use a syscall, it calls a pointer to the corresponding syscall
* implementation defined in the following struct.
*
* The table itself, by default, is not allocated in RAM. There are two pointers, `syscall_table_ptr_pro` and
* `syscall_table_ptr_app`, which can be set to point to the locations of syscall tables of CPU 0 (aka PRO CPU)
* and CPU 1 (aka APP CPU). Location of these pointers in .bss segment of ROM code is defined in linker script.
*
* So, before using any of the C library functions (except for pure functions and memcpy/memset functions),
* application must allocate syscall table structure for each CPU being used, and populate it with pointers
* to actual implementations of corresponding syscalls.
*
*/
struct syscall_stub_table {
struct _reent *(*__getreent)(void);
void *(*_malloc_r)(struct _reent *r, size_t);
void (*_free_r)(struct _reent *r, void *);
void *(*_realloc_r)(struct _reent *r, void *, size_t);
void *(*_calloc_r)(struct _reent *r, size_t, size_t);
void (*_abort)(void);
int (*_system_r)(struct _reent *r, const char *);
int (*_rename_r)(struct _reent *r, const char *, const char *);
clock_t (*_times_r)(struct _reent *r, struct tms *);
int (*_gettimeofday_r) (struct _reent *r, struct timeval *, void *);
void (*_raise_r)(struct _reent *r);
int (*_unlink_r)(struct _reent *r, const char *);
int (*_link_r)(struct _reent *r, const char *, const char *);
int (*_stat_r)(struct _reent *r, const char *, struct stat *);
int (*_fstat_r)(struct _reent *r, int, struct stat *);
void *(*_sbrk_r)(struct _reent *r, ptrdiff_t);
int (*_getpid_r)(struct _reent *r);
int (*_kill_r)(struct _reent *r, int, int);
void (*_exit_r)(struct _reent *r, int);
int (*_close_r)(struct _reent *r, int);
int (*_open_r)(struct _reent *r, const char *, int, int);
int (*_write_r)(struct _reent *r, int, const void *, int);
int (*_lseek_r)(struct _reent *r, int, int, int);
int (*_read_r)(struct _reent *r, int, void *, int);
void (*_lock_init)(_lock_t *lock);
void (*_lock_init_recursive)(_lock_t *lock);
void (*_lock_close)(_lock_t *lock);
void (*_lock_close_recursive)(_lock_t *lock);
void (*_lock_acquire)(_lock_t *lock);
void (*_lock_acquire_recursive)(_lock_t *lock);
int (*_lock_try_acquire)(_lock_t *lock);
int (*_lock_try_acquire_recursive)(_lock_t *lock);
void (*_lock_release)(_lock_t *lock);
void (*_lock_release_recursive)(_lock_t *lock);
int (*_printf_float)(struct _reent *data, void *pdata, FILE *fp, int (*pfunc) (struct _reent *, FILE *, const char *, size_t len), va_list *ap);
int (*_scanf_float) (struct _reent *rptr, void *pdata, FILE *fp, va_list *ap);
};
extern struct syscall_stub_table *syscall_table_ptr;
#define syscall_table_ptr_pro syscall_table_ptr
#define syscall_table_ptr_app syscall_table_ptr
#ifdef __cplusplus
} // extern "C"
#endif

173
components/esp_rom/include/esp32s3/rom/lldesc.h Normal file
View File

@ -0,0 +1,173 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include "sys/queue.h"
#ifdef __cplusplus
extern "C" {
#endif
#define LLDESC_TX_MBLK_SIZE 268 /* */
#define LLDESC_RX_SMBLK_SIZE 64 /* small block size, for small mgmt frame */
#define LLDESC_RX_MBLK_SIZE 524 /* rx is large sinec we want to contain mgmt frame in one block*/
#define LLDESC_RX_AMPDU_ENTRY_MBLK_SIZE 64 /* it is a small buffer which is a cycle link*/
#define LLDESC_RX_AMPDU_LEN_MBLK_SIZE 256 /*for ampdu entry*/
#ifdef ESP_MAC_5
#define LLDESC_TX_MBLK_NUM 116 /* 64K / 256 */
#define LLDESC_RX_MBLK_NUM 82 /* 64K / 512 MAX 172*/
#define LLDESC_RX_AMPDU_ENTRY_MBLK_NUM 4
#define LLDESC_RX_AMPDU_LEN_MLBK_NUM 12
#else
#ifdef SBUF_RXTX
#define LLDESC_TX_MBLK_NUM_MAX (2 * 48) /* 23K / 260 - 8 */
#define LLDESC_RX_MBLK_NUM_MAX (2 * 48) /* 23K / 524 */
#define LLDESC_TX_MBLK_NUM_MIN (2 * 16) /* 23K / 260 - 8 */
#define LLDESC_RX_MBLK_NUM_MIN (2 * 16) /* 23K / 524 */
#endif
#define LLDESC_TX_MBLK_NUM 10 //(2 * 32) /* 23K / 260 - 8 */
#ifdef IEEE80211_RX_AMPDU
#define LLDESC_RX_MBLK_NUM 30
#else
#define LLDESC_RX_MBLK_NUM 10
#endif /*IEEE80211_RX_AMPDU*/
#define LLDESC_RX_AMPDU_ENTRY_MBLK_NUM 4
#define LLDESC_RX_AMPDU_LEN_MLBK_NUM 8
#endif /* !ESP_MAC_5 */
/*
* SLC2 DMA Desc struct, aka lldesc_t
*
* --------------------------------------------------------------
* | own | EoF | sub_sof | 5'b0 | length [11:0] | size [11:0] |
* --------------------------------------------------------------
* | buf_ptr [31:0] |
* --------------------------------------------------------------
* | next_desc_ptr [31:0] |
* --------------------------------------------------------------
*/
/* this bitfield is start from the LSB!!! */
typedef struct lldesc_s {
volatile uint32_t size : 12,
length: 12,
offset: 5, /* h/w reserved 5bit, s/w use it as offset in buffer */
sosf : 1, /* start of sub-frame */
eof : 1, /* end of frame */
owner : 1; /* hw or sw */
volatile uint8_t *buf; /* point to buffer data */
union {
volatile uint32_t empty;
STAILQ_ENTRY(lldesc_s) qe; /* pointing to the next desc */
};
} lldesc_t;
typedef struct tx_ampdu_entry_s {
uint32_t sub_len : 12,
dili_num : 7,
: 1,
null_byte: 2,
data : 1,
enc : 1,
seq : 8;
} tx_ampdu_entry_t;
typedef struct lldesc_chain_s {
lldesc_t *head;
lldesc_t *tail;
} lldesc_chain_t;
#ifdef SBUF_RXTX
enum sbuf_mask_s {
SBUF_MOVE_NO = 0,
SBUF_MOVE_TX2RX,
SBUF_MOVE_RX2TX,
} ;
#define SBUF_MOVE_STEP 8
#endif
#define LLDESC_SIZE sizeof(struct lldesc_s)
/* SLC Descriptor */
#define LLDESC_OWNER_MASK 0x80000000
#define LLDESC_OWNER_SHIFT 31
#define LLDESC_SW_OWNED 0
#define LLDESC_HW_OWNED 1
#define LLDESC_EOF_MASK 0x40000000
#define LLDESC_EOF_SHIFT 30
#define LLDESC_SOSF_MASK 0x20000000
#define LLDESC_SOSF_SHIFT 29
#define LLDESC_LENGTH_MASK 0x00fff000
#define LLDESC_LENGTH_SHIFT 12
#define LLDESC_SIZE_MASK 0x00000fff
#define LLDESC_SIZE_SHIFT 0
#define LLDESC_ADDR_MASK 0x000fffff
void lldesc_build_chain(uint8_t *descptr, uint32_t desclen, uint8_t *mblkptr, uint32_t buflen, uint32_t blksz, uint8_t owner,
lldesc_t **head,
#ifdef TO_HOST_RESTART
lldesc_t **one_before_tail,
#endif
lldesc_t **tail);
lldesc_t *lldesc_num2link(lldesc_t *head, uint16_t nblks);
lldesc_t *lldesc_set_owner(lldesc_t *head, uint16_t nblks, uint8_t owner);
static inline uint32_t lldesc_get_chain_length(lldesc_t *head)
{
lldesc_t *ds = head;
uint32_t len = 0;
while (ds) {
len += ds->length;
ds = STAILQ_NEXT(ds, qe);
}
return len;
}
static inline void lldesc_config(lldesc_t *ds, uint8_t owner, uint8_t eof, uint8_t sosf, uint16_t len)
{
ds->owner = owner;
ds->eof = eof;
ds->sosf = sosf;
ds->length = len;
}
#define LLDESC_CONFIG(_desc, _owner, _eof, _sosf, _len) \
do { \
(_desc)->owner = (_owner); \
(_desc)->eof = (_eof); \
(_desc)->sosf = (_sosf); \
(_desc)->length = (_len); \
} while(0)
#define LLDESC_FROM_HOST_CLEANUP(ds) LLDESC_CONFIG((ds), LLDESC_HW_OWNED, 0, 0, 0)
#define LLDESC_MAC_RX_CLEANUP(ds) LLDESC_CONFIG((ds), LLDESC_HW_OWNED, 0, 0, (ds)->size)
#define LLDESC_TO_HOST_CLEANUP(ds) LLDESC_CONFIG((ds), LLDESC_HW_OWNED, 0, 0, 0)
#ifdef __cplusplus
}
#endif

35
components/esp_rom/include/esp32s3/rom/md5_hash.h Normal file
View File

@ -0,0 +1,35 @@
/*
* MD5 internal definitions
* Copyright (c) 2003-2005, Jouni Malinen <j@w1.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Alternatively, this software may be distributed under the terms of BSD
* license.
*
* See README and COPYING for more details.
*/
#pragma once
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
struct MD5Context {
uint32_t buf[4];
uint32_t bits[2];
uint8_t in[64];
};
void MD5Init(struct MD5Context *context);
void MD5Update(struct MD5Context *context, unsigned char const *buf, unsigned len);
void MD5Final(unsigned char digest[16], struct MD5Context *context);
#ifdef __cplusplus
}
#endif

757
components/esp_rom/include/esp32s3/rom/miniz.h Normal file
View File

@ -0,0 +1,757 @@
#pragma once
#include <stdlib.h>
// Defines to completely disable specific portions of miniz.c:
// If all macros here are defined the only functionality remaining will be CRC-32, adler-32, tinfl, and tdefl.
// Define MINIZ_NO_STDIO to disable all usage and any functions which rely on stdio for file I/O.
#define MINIZ_NO_STDIO
// If MINIZ_NO_TIME is specified then the ZIP archive functions will not be able to get the current time, or
// get/set file times, and the C run-time funcs that get/set times won't be called.
// The current downside is the times written to your archives will be from 1979.
#define MINIZ_NO_TIME
// Define MINIZ_NO_ARCHIVE_APIS to disable all ZIP archive API's.
#define MINIZ_NO_ARCHIVE_APIS
// Define MINIZ_NO_ARCHIVE_APIS to disable all writing related ZIP archive API's.
#define MINIZ_NO_ARCHIVE_WRITING_APIS
// Define MINIZ_NO_ZLIB_APIS to remove all ZLIB-style compression/decompression API's.
#define MINIZ_NO_ZLIB_APIS
// Define MINIZ_NO_ZLIB_COMPATIBLE_NAME to disable zlib names, to prevent conflicts against stock zlib.
#define MINIZ_NO_ZLIB_COMPATIBLE_NAMES
// Define MINIZ_NO_MALLOC to disable all calls to malloc, free, and realloc.
// Note if MINIZ_NO_MALLOC is defined then the user must always provide custom user alloc/free/realloc
// callbacks to the zlib and archive API's, and a few stand-alone helper API's which don't provide custom user
// functions (such as tdefl_compress_mem_to_heap() and tinfl_decompress_mem_to_heap()) won't work.
#define MINIZ_NO_MALLOC
#if defined(__TINYC__) && (defined(__linux) || defined(__linux__))
// TODO: Work around "error: include file 'sys\utime.h' when compiling with tcc on Linux
#define MINIZ_NO_TIME
#endif
#if !defined(MINIZ_NO_TIME) && !defined(MINIZ_NO_ARCHIVE_APIS)
#include <time.h>
#endif
//Hardcoded options for Xtensa - JD
#define MINIZ_X86_OR_X64_CPU 0
#define MINIZ_LITTLE_ENDIAN 1
#define MINIZ_USE_UNALIGNED_LOADS_AND_STORES 0
#define MINIZ_HAS_64BIT_REGISTERS 0
#define TINFL_USE_64BIT_BITBUF 0
#if defined(_M_IX86) || defined(_M_X64) || defined(__i386__) || defined(__i386) || defined(__i486__) || defined(__i486) || defined(i386) || defined(__ia64__) || defined(__x86_64__)
// MINIZ_X86_OR_X64_CPU is only used to help set the below macros.
#define MINIZ_X86_OR_X64_CPU 1
#endif
#if (__BYTE_ORDER__==__ORDER_LITTLE_ENDIAN__) || MINIZ_X86_OR_X64_CPU
// Set MINIZ_LITTLE_ENDIAN to 1 if the processor is little endian.
#define MINIZ_LITTLE_ENDIAN 1
#endif
#if MINIZ_X86_OR_X64_CPU
// Set MINIZ_USE_UNALIGNED_LOADS_AND_STORES to 1 on CPU's that permit efficient integer loads and stores from unaligned addresses.
#define MINIZ_USE_UNALIGNED_LOADS_AND_STORES 1
#endif
#if defined(_M_X64) || defined(_WIN64) || defined(__MINGW64__) || defined(_LP64) || defined(__LP64__) || defined(__ia64__) || defined(__x86_64__)
// Set MINIZ_HAS_64BIT_REGISTERS to 1 if operations on 64-bit integers are reasonably fast (and don't involve compiler generated calls to helper functions).
#define MINIZ_HAS_64BIT_REGISTERS 1
#endif
#ifdef __cplusplus
extern "C" {
#endif
// ------------------- zlib-style API Definitions.
// For more compatibility with zlib, miniz.c uses unsigned long for some parameters/struct members. Beware: mz_ulong can be either 32 or 64-bits!
typedef unsigned long mz_ulong;
// mz_free() internally uses the MZ_FREE() macro (which by default calls free() unless you've modified the MZ_MALLOC macro) to release a block allocated from the heap.
void mz_free(void *p);
#define MZ_ADLER32_INIT (1)
// mz_adler32() returns the initial adler-32 value to use when called with ptr==NULL.
mz_ulong mz_adler32(mz_ulong adler, const unsigned char *ptr, size_t buf_len);
#define MZ_CRC32_INIT (0)
// mz_crc32() returns the initial CRC-32 value to use when called with ptr==NULL.
mz_ulong mz_crc32(mz_ulong crc, const unsigned char *ptr, size_t buf_len);
// Compression strategies.
enum { MZ_DEFAULT_STRATEGY = 0, MZ_FILTERED = 1, MZ_HUFFMAN_ONLY = 2, MZ_RLE = 3, MZ_FIXED = 4 };
// Method
#define MZ_DEFLATED 8
#ifndef MINIZ_NO_ZLIB_APIS
// Heap allocation callbacks.
// Note that mz_alloc_func parameter types purpsosely differ from zlib's: items/size is size_t, not unsigned long.
typedef void *(*mz_alloc_func)(void *opaque, size_t items, size_t size);
typedef void (*mz_free_func)(void *opaque, void *address);
typedef void *(*mz_realloc_func)(void *opaque, void *address, size_t items, size_t size);
#define MZ_VERSION "9.1.15"
#define MZ_VERNUM 0x91F0
#define MZ_VER_MAJOR 9
#define MZ_VER_MINOR 1
#define MZ_VER_REVISION 15
#define MZ_VER_SUBREVISION 0
// Flush values. For typical usage you only need MZ_NO_FLUSH and MZ_FINISH. The other values are for advanced use (refer to the zlib docs).
enum { MZ_NO_FLUSH = 0, MZ_PARTIAL_FLUSH = 1, MZ_SYNC_FLUSH = 2, MZ_FULL_FLUSH = 3, MZ_FINISH = 4, MZ_BLOCK = 5 };
// Return status codes. MZ_PARAM_ERROR is non-standard.
enum { MZ_OK = 0, MZ_STREAM_END = 1, MZ_NEED_DICT = 2, MZ_ERRNO = -1, MZ_STREAM_ERROR = -2, MZ_DATA_ERROR = -3, MZ_MEM_ERROR = -4, MZ_BUF_ERROR = -5, MZ_VERSION_ERROR = -6, MZ_PARAM_ERROR = -10000 };
// Compression levels: 0-9 are the standard zlib-style levels, 10 is best possible compression (not zlib compatible, and may be very slow), MZ_DEFAULT_COMPRESSION=MZ_DEFAULT_LEVEL.
enum { MZ_NO_COMPRESSION = 0, MZ_BEST_SPEED = 1, MZ_BEST_COMPRESSION = 9, MZ_UBER_COMPRESSION = 10, MZ_DEFAULT_LEVEL = 6, MZ_DEFAULT_COMPRESSION = -1 };
// Window bits
#define MZ_DEFAULT_WINDOW_BITS 15
struct mz_internal_state;
// Compression/decompression stream struct.
typedef struct mz_stream_s {
const unsigned char *next_in; // pointer to next byte to read
unsigned int avail_in; // number of bytes available at next_in
mz_ulong total_in; // total number of bytes consumed so far
unsigned char *next_out; // pointer to next byte to write
unsigned int avail_out; // number of bytes that can be written to next_out
mz_ulong total_out; // total number of bytes produced so far
char *msg; // error msg (unused)
struct mz_internal_state *state; // internal state, allocated by zalloc/zfree
mz_alloc_func zalloc; // optional heap allocation function (defaults to malloc)
mz_free_func zfree; // optional heap free function (defaults to free)
void *opaque; // heap alloc function user pointer
int data_type; // data_type (unused)
mz_ulong adler; // adler32 of the source or uncompressed data
mz_ulong reserved; // not used
} mz_stream;
typedef mz_stream *mz_streamp;
// Returns the version string of miniz.c.
const char *mz_version(void);
// mz_deflateInit() initializes a compressor with default options:
// Parameters:
// pStream must point to an initialized mz_stream struct.
// level must be between [MZ_NO_COMPRESSION, MZ_BEST_COMPRESSION].
// level 1 enables a specially optimized compression function that's been optimized purely for performance, not ratio.
// (This special func. is currently only enabled when MINIZ_USE_UNALIGNED_LOADS_AND_STORES and MINIZ_LITTLE_ENDIAN are defined.)
// Return values:
// MZ_OK on success.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_PARAM_ERROR if the input parameters are bogus.
// MZ_MEM_ERROR on out of memory.
int mz_deflateInit(mz_streamp pStream, int level);
// mz_deflateInit2() is like mz_deflate(), except with more control:
// Additional parameters:
// method must be MZ_DEFLATED
// window_bits must be MZ_DEFAULT_WINDOW_BITS (to wrap the deflate stream with zlib header/adler-32 footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate/no header or footer)
// mem_level must be between [1, 9] (it's checked but ignored by miniz.c)
int mz_deflateInit2(mz_streamp pStream, int level, int method, int window_bits, int mem_level, int strategy);
// Quickly resets a compressor without having to reallocate anything. Same as calling mz_deflateEnd() followed by mz_deflateInit()/mz_deflateInit2().
int mz_deflateReset(mz_streamp pStream);
// mz_deflate() compresses the input to output, consuming as much of the input and producing as much output as possible.
// Parameters:
// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members.
// flush may be MZ_NO_FLUSH, MZ_PARTIAL_FLUSH/MZ_SYNC_FLUSH, MZ_FULL_FLUSH, or MZ_FINISH.
// Return values:
// MZ_OK on success (when flushing, or if more input is needed but not available, and/or there's more output to be written but the output buffer is full).
// MZ_STREAM_END if all input has been consumed and all output bytes have been written. Don't call mz_deflate() on the stream anymore.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_PARAM_ERROR if one of the parameters is invalid.
// MZ_BUF_ERROR if no forward progress is possible because the input and/or output buffers are empty. (Fill up the input buffer or free up some output space and try again.)
int mz_deflate(mz_streamp pStream, int flush);
// mz_deflateEnd() deinitializes a compressor:
// Return values:
// MZ_OK on success.
// MZ_STREAM_ERROR if the stream is bogus.
int mz_deflateEnd(mz_streamp pStream);
// mz_deflateBound() returns a (very) conservative upper bound on the amount of data that could be generated by deflate(), assuming flush is set to only MZ_NO_FLUSH or MZ_FINISH.
mz_ulong mz_deflateBound(mz_streamp pStream, mz_ulong source_len);
// Single-call compression functions mz_compress() and mz_compress2():
// Returns MZ_OK on success, or one of the error codes from mz_deflate() on failure.
int mz_compress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len);
int mz_compress2(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len, int level);
// mz_compressBound() returns a (very) conservative upper bound on the amount of data that could be generated by calling mz_compress().
mz_ulong mz_compressBound(mz_ulong source_len);
// Initializes a decompressor.
int mz_inflateInit(mz_streamp pStream);
// mz_inflateInit2() is like mz_inflateInit() with an additional option that controls the window size and whether or not the stream has been wrapped with a zlib header/footer:
// window_bits must be MZ_DEFAULT_WINDOW_BITS (to parse zlib header/footer) or -MZ_DEFAULT_WINDOW_BITS (raw deflate).
int mz_inflateInit2(mz_streamp pStream, int window_bits);
// Decompresses the input stream to the output, consuming only as much of the input as needed, and writing as much to the output as possible.
// Parameters:
// pStream is the stream to read from and write to. You must initialize/update the next_in, avail_in, next_out, and avail_out members.
// flush may be MZ_NO_FLUSH, MZ_SYNC_FLUSH, or MZ_FINISH.
// On the first call, if flush is MZ_FINISH it's assumed the input and output buffers are both sized large enough to decompress the entire stream in a single call (this is slightly faster).
// MZ_FINISH implies that there are no more source bytes available beside what's already in the input buffer, and that the output buffer is large enough to hold the rest of the decompressed data.
// Return values:
// MZ_OK on success. Either more input is needed but not available, and/or there's more output to be written but the output buffer is full.
// MZ_STREAM_END if all needed input has been consumed and all output bytes have been written. For zlib streams, the adler-32 of the decompressed data has also been verified.
// MZ_STREAM_ERROR if the stream is bogus.
// MZ_DATA_ERROR if the deflate stream is invalid.
// MZ_PARAM_ERROR if one of the parameters is invalid.
// MZ_BUF_ERROR if no forward progress is possible because the input buffer is empty but the inflater needs more input to continue, or if the output buffer is not large enough. Call mz_inflate() again
// with more input data, or with more room in the output buffer (except when using single call decompression, described above).
int mz_inflate(mz_streamp pStream, int flush);
// Deinitializes a decompressor.
int mz_inflateEnd(mz_streamp pStream);
// Single-call decompression.
// Returns MZ_OK on success, or one of the error codes from mz_inflate() on failure.
int mz_uncompress(unsigned char *pDest, mz_ulong *pDest_len, const unsigned char *pSource, mz_ulong source_len);
// Returns a string description of the specified error code, or NULL if the error code is invalid.
const char *mz_error(int err);
// Redefine zlib-compatible names to miniz equivalents, so miniz.c can be used as a drop-in replacement for the subset of zlib that miniz.c supports.
// Define MINIZ_NO_ZLIB_COMPATIBLE_NAMES to disable zlib-compatibility if you use zlib in the same project.
#ifndef MINIZ_NO_ZLIB_COMPATIBLE_NAMES
typedef unsigned char Byte;
typedef unsigned int uInt;
typedef mz_ulong uLong;
typedef Byte Bytef;
typedef uInt uIntf;
typedef char charf;
typedef int intf;
typedef void *voidpf;
typedef uLong uLongf;
typedef void *voidp;
typedef void *const voidpc;
#define Z_NULL 0
#define Z_NO_FLUSH MZ_NO_FLUSH
#define Z_PARTIAL_FLUSH MZ_PARTIAL_FLUSH
#define Z_SYNC_FLUSH MZ_SYNC_FLUSH
#define Z_FULL_FLUSH MZ_FULL_FLUSH
#define Z_FINISH MZ_FINISH
#define Z_BLOCK MZ_BLOCK
#define Z_OK MZ_OK
#define Z_STREAM_END MZ_STREAM_END
#define Z_NEED_DICT MZ_NEED_DICT
#define Z_ERRNO MZ_ERRNO
#define Z_STREAM_ERROR MZ_STREAM_ERROR
#define Z_DATA_ERROR MZ_DATA_ERROR
#define Z_MEM_ERROR MZ_MEM_ERROR
#define Z_BUF_ERROR MZ_BUF_ERROR
#define Z_VERSION_ERROR MZ_VERSION_ERROR
#define Z_PARAM_ERROR MZ_PARAM_ERROR
#define Z_NO_COMPRESSION MZ_NO_COMPRESSION
#define Z_BEST_SPEED MZ_BEST_SPEED
#define Z_BEST_COMPRESSION MZ_BEST_COMPRESSION
#define Z_DEFAULT_COMPRESSION MZ_DEFAULT_COMPRESSION
#define Z_DEFAULT_STRATEGY MZ_DEFAULT_STRATEGY
#define Z_FILTERED MZ_FILTERED
#define Z_HUFFMAN_ONLY MZ_HUFFMAN_ONLY
#define Z_RLE MZ_RLE
#define Z_FIXED MZ_FIXED
#define Z_DEFLATED MZ_DEFLATED
#define Z_DEFAULT_WINDOW_BITS MZ_DEFAULT_WINDOW_BITS
#define alloc_func mz_alloc_func
#define free_func mz_free_func
#define internal_state mz_internal_state
#define z_stream mz_stream
#define deflateInit mz_deflateInit
#define deflateInit2 mz_deflateInit2
#define deflateReset mz_deflateReset
#define deflate mz_deflate
#define deflateEnd mz_deflateEnd
#define deflateBound mz_deflateBound
#define compress mz_compress
#define compress2 mz_compress2
#define compressBound mz_compressBound
#define inflateInit mz_inflateInit
#define inflateInit2 mz_inflateInit2
#define inflate mz_inflate
#define inflateEnd mz_inflateEnd
#define uncompress mz_uncompress
#define crc32 mz_crc32
#define adler32 mz_adler32
#define MAX_WBITS 15
#define MAX_MEM_LEVEL 9
#define zError mz_error
#define ZLIB_VERSION MZ_VERSION
#define ZLIB_VERNUM MZ_VERNUM
#define ZLIB_VER_MAJOR MZ_VER_MAJOR
#define ZLIB_VER_MINOR MZ_VER_MINOR
#define ZLIB_VER_REVISION MZ_VER_REVISION
#define ZLIB_VER_SUBREVISION MZ_VER_SUBREVISION
#define zlibVersion mz_version
#define zlib_version mz_version()
#endif // #ifndef MINIZ_NO_ZLIB_COMPATIBLE_NAMES
#endif // MINIZ_NO_ZLIB_APIS
// ------------------- Types and macros
typedef unsigned char mz_uint8;
typedef signed short mz_int16;
typedef unsigned short mz_uint16;
typedef unsigned int mz_uint32;
typedef unsigned int mz_uint;
typedef long long mz_int64;
typedef unsigned long long mz_uint64;
typedef int mz_bool;
#define MZ_FALSE (0)
#define MZ_TRUE (1)
// An attempt to work around MSVC's spammy "warning C4127: conditional expression is constant" message.
#ifdef _MSC_VER
#define MZ_MACRO_END while (0, 0)
#else
#define MZ_MACRO_END while (0)
#endif
// ------------------- ZIP archive reading/writing
#ifndef MINIZ_NO_ARCHIVE_APIS
enum {
MZ_ZIP_MAX_IO_BUF_SIZE = 64 * 1024,
MZ_ZIP_MAX_ARCHIVE_FILENAME_SIZE = 260,
MZ_ZIP_MAX_ARCHIVE_FILE_COMMENT_SIZE = 256
};
typedef struct {
mz_uint32 m_file_index;
mz_uint32 m_central_dir_ofs;
mz_uint16 m_version_made_by;
mz_uint16 m_version_needed;
mz_uint16 m_bit_flag;
mz_uint16 m_method;
#ifndef MINIZ_NO_TIME
time_t m_time;
#endif
mz_uint32 m_crc32;
mz_uint64 m_comp_size;
mz_uint64 m_uncomp_size;
mz_uint16 m_internal_attr;
mz_uint32 m_external_attr;
mz_uint64 m_local_header_ofs;
mz_uint32 m_comment_size;
char m_filename[MZ_ZIP_MAX_ARCHIVE_FILENAME_SIZE];
char m_comment[MZ_ZIP_MAX_ARCHIVE_FILE_COMMENT_SIZE];
} mz_zip_archive_file_stat;
typedef size_t (*mz_file_read_func)(void *pOpaque, mz_uint64 file_ofs, void *pBuf, size_t n);
typedef size_t (*mz_file_write_func)(void *pOpaque, mz_uint64 file_ofs, const void *pBuf, size_t n);
struct mz_zip_internal_state_tag;
typedef struct mz_zip_internal_state_tag mz_zip_internal_state;
typedef enum {
MZ_ZIP_MODE_INVALID = 0,
MZ_ZIP_MODE_READING = 1,
MZ_ZIP_MODE_WRITING = 2,
MZ_ZIP_MODE_WRITING_HAS_BEEN_FINALIZED = 3
} mz_zip_mode;
typedef struct mz_zip_archive_tag {
mz_uint64 m_archive_size;
mz_uint64 m_central_directory_file_ofs;
mz_uint m_total_files;
mz_zip_mode m_zip_mode;
mz_uint m_file_offset_alignment;
mz_alloc_func m_pAlloc;
mz_free_func m_pFree;
mz_realloc_func m_pRealloc;
void *m_pAlloc_opaque;
mz_file_read_func m_pRead;
mz_file_write_func m_pWrite;
void *m_pIO_opaque;
mz_zip_internal_state *m_pState;
} mz_zip_archive;
typedef enum {
MZ_ZIP_FLAG_CASE_SENSITIVE = 0x0100,
MZ_ZIP_FLAG_IGNORE_PATH = 0x0200,
MZ_ZIP_FLAG_COMPRESSED_DATA = 0x0400,
MZ_ZIP_FLAG_DO_NOT_SORT_CENTRAL_DIRECTORY = 0x0800
} mz_zip_flags;
// ZIP archive reading
// Inits a ZIP archive reader.
// These functions read and validate the archive's central directory.
mz_bool mz_zip_reader_init(mz_zip_archive *pZip, mz_uint64 size, mz_uint32 flags);
mz_bool mz_zip_reader_init_mem(mz_zip_archive *pZip, const void *pMem, size_t size, mz_uint32 flags);
#ifndef MINIZ_NO_STDIO
mz_bool mz_zip_reader_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint32 flags);
#endif
// Returns the total number of files in the archive.
mz_uint mz_zip_reader_get_num_files(mz_zip_archive *pZip);
// Returns detailed information about an archive file entry.
mz_bool mz_zip_reader_file_stat(mz_zip_archive *pZip, mz_uint file_index, mz_zip_archive_file_stat *pStat);
// Determines if an archive file entry is a directory entry.
mz_bool mz_zip_reader_is_file_a_directory(mz_zip_archive *pZip, mz_uint file_index);
mz_bool mz_zip_reader_is_file_encrypted(mz_zip_archive *pZip, mz_uint file_index);
// Retrieves the filename of an archive file entry.
// Returns the number of bytes written to pFilename, or if filename_buf_size is 0 this function returns the number of bytes needed to fully store the filename.
mz_uint mz_zip_reader_get_filename(mz_zip_archive *pZip, mz_uint file_index, char *pFilename, mz_uint filename_buf_size);
// Attempts to locates a file in the archive's central directory.
// Valid flags: MZ_ZIP_FLAG_CASE_SENSITIVE, MZ_ZIP_FLAG_IGNORE_PATH
// Returns -1 if the file cannot be found.
int mz_zip_reader_locate_file(mz_zip_archive *pZip, const char *pName, const char *pComment, mz_uint flags);
// Extracts a archive file to a memory buffer using no memory allocation.
mz_bool mz_zip_reader_extract_to_mem_no_alloc(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size);
mz_bool mz_zip_reader_extract_file_to_mem_no_alloc(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags, void *pUser_read_buf, size_t user_read_buf_size);
// Extracts a archive file to a memory buffer.
mz_bool mz_zip_reader_extract_to_mem(mz_zip_archive *pZip, mz_uint file_index, void *pBuf, size_t buf_size, mz_uint flags);
mz_bool mz_zip_reader_extract_file_to_mem(mz_zip_archive *pZip, const char *pFilename, void *pBuf, size_t buf_size, mz_uint flags);
// Extracts a archive file to a dynamically allocated heap buffer.
void *mz_zip_reader_extract_to_heap(mz_zip_archive *pZip, mz_uint file_index, size_t *pSize, mz_uint flags);
void *mz_zip_reader_extract_file_to_heap(mz_zip_archive *pZip, const char *pFilename, size_t *pSize, mz_uint flags);
// Extracts a archive file using a callback function to output the file's data.
mz_bool mz_zip_reader_extract_to_callback(mz_zip_archive *pZip, mz_uint file_index, mz_file_write_func pCallback, void *pOpaque, mz_uint flags);
mz_bool mz_zip_reader_extract_file_to_callback(mz_zip_archive *pZip, const char *pFilename, mz_file_write_func pCallback, void *pOpaque, mz_uint flags);
#ifndef MINIZ_NO_STDIO
// Extracts a archive file to a disk file and sets its last accessed and modified times.
// This function only extracts files, not archive directory records.
mz_bool mz_zip_reader_extract_to_file(mz_zip_archive *pZip, mz_uint file_index, const char *pDst_filename, mz_uint flags);
mz_bool mz_zip_reader_extract_file_to_file(mz_zip_archive *pZip, const char *pArchive_filename, const char *pDst_filename, mz_uint flags);
#endif
// Ends archive reading, freeing all allocations, and closing the input archive file if mz_zip_reader_init_file() was used.
mz_bool mz_zip_reader_end(mz_zip_archive *pZip);
// ZIP archive writing
#ifndef MINIZ_NO_ARCHIVE_WRITING_APIS
// Inits a ZIP archive writer.
mz_bool mz_zip_writer_init(mz_zip_archive *pZip, mz_uint64 existing_size);
mz_bool mz_zip_writer_init_heap(mz_zip_archive *pZip, size_t size_to_reserve_at_beginning, size_t initial_allocation_size);
#ifndef MINIZ_NO_STDIO
mz_bool mz_zip_writer_init_file(mz_zip_archive *pZip, const char *pFilename, mz_uint64 size_to_reserve_at_beginning);
#endif
// Converts a ZIP archive reader object into a writer object, to allow efficient in-place file appends to occur on an existing archive.
// For archives opened using mz_zip_reader_init_file, pFilename must be the archive's filename so it can be reopened for writing. If the file can't be reopened, mz_zip_reader_end() will be called.
// For archives opened using mz_zip_reader_init_mem, the memory block must be growable using the realloc callback (which defaults to realloc unless you've overridden it).
// Finally, for archives opened using mz_zip_reader_init, the mz_zip_archive's user provided m_pWrite function cannot be NULL.
// Note: In-place archive modification is not recommended unless you know what you're doing, because if execution stops or something goes wrong before
// the archive is finalized the file's central directory will be hosed.
mz_bool mz_zip_writer_init_from_reader(mz_zip_archive *pZip, const char *pFilename);
// Adds the contents of a memory buffer to an archive. These functions record the current local time into the archive.
// To add a directory entry, call this method with an archive name ending in a forwardslash with empty buffer.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
mz_bool mz_zip_writer_add_mem(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, mz_uint level_and_flags);
mz_bool mz_zip_writer_add_mem_ex(mz_zip_archive *pZip, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags, mz_uint64 uncomp_size, mz_uint32 uncomp_crc32);
#ifndef MINIZ_NO_STDIO
// Adds the contents of a disk file to an archive. This function also records the disk file's modified time into the archive.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
mz_bool mz_zip_writer_add_file(mz_zip_archive *pZip, const char *pArchive_name, const char *pSrc_filename, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags);
#endif
// Adds a file to an archive by fully cloning the data from another archive.
// This function fully clones the source file's compressed data (no recompression), along with its full filename, extra data, and comment fields.
mz_bool mz_zip_writer_add_from_zip_reader(mz_zip_archive *pZip, mz_zip_archive *pSource_zip, mz_uint file_index);
// Finalizes the archive by writing the central directory records followed by the end of central directory record.
// After an archive is finalized, the only valid call on the mz_zip_archive struct is mz_zip_writer_end().
// An archive must be manually finalized by calling this function for it to be valid.
mz_bool mz_zip_writer_finalize_archive(mz_zip_archive *pZip);
mz_bool mz_zip_writer_finalize_heap_archive(mz_zip_archive *pZip, void **pBuf, size_t *pSize);
// Ends archive writing, freeing all allocations, and closing the output file if mz_zip_writer_init_file() was used.
// Note for the archive to be valid, it must have been finalized before ending.
mz_bool mz_zip_writer_end(mz_zip_archive *pZip);
// Misc. high-level helper functions:
// mz_zip_add_mem_to_archive_file_in_place() efficiently (but not atomically) appends a memory blob to a ZIP archive.
// level_and_flags - compression level (0-10, see MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc.) logically OR'd with zero or more mz_zip_flags, or just set to MZ_DEFAULT_COMPRESSION.
mz_bool mz_zip_add_mem_to_archive_file_in_place(const char *pZip_filename, const char *pArchive_name, const void *pBuf, size_t buf_size, const void *pComment, mz_uint16 comment_size, mz_uint level_and_flags);
// Reads a single file from an archive into a heap block.
// Returns NULL on failure.
void *mz_zip_extract_archive_file_to_heap(const char *pZip_filename, const char *pArchive_name, size_t *pSize, mz_uint zip_flags);
#endif // #ifndef MINIZ_NO_ARCHIVE_WRITING_APIS
#endif // #ifndef MINIZ_NO_ARCHIVE_APIS
// ------------------- Low-level Decompression API Definitions
// Decompression flags used by tinfl_decompress().
// TINFL_FLAG_PARSE_ZLIB_HEADER: If set, the input has a valid zlib header and ends with an adler32 checksum (it's a valid zlib stream). Otherwise, the input is a raw deflate stream.
// TINFL_FLAG_HAS_MORE_INPUT: If set, there are more input bytes available beyond the end of the supplied input buffer. If clear, the input buffer contains all remaining input.
// TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF: If set, the output buffer is large enough to hold the entire decompressed stream. If clear, the output buffer is at least the size of the dictionary (typically 32KB).
// TINFL_FLAG_COMPUTE_ADLER32: Force adler-32 checksum computation of the decompressed bytes.
enum {
TINFL_FLAG_PARSE_ZLIB_HEADER = 1,
TINFL_FLAG_HAS_MORE_INPUT = 2,
TINFL_FLAG_USING_NON_WRAPPING_OUTPUT_BUF = 4,
TINFL_FLAG_COMPUTE_ADLER32 = 8
};
// High level decompression functions:
// tinfl_decompress_mem_to_heap() decompresses a block in memory to a heap block allocated via malloc().
// On entry:
// pSrc_buf, src_buf_len: Pointer and size of the Deflate or zlib source data to decompress.
// On return:
// Function returns a pointer to the decompressed data, or NULL on failure.
// *pOut_len will be set to the decompressed data's size, which could be larger than src_buf_len on uncompressible data.
// The caller must call mz_free() on the returned block when it's no longer needed.
void *tinfl_decompress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags);
// tinfl_decompress_mem_to_mem() decompresses a block in memory to another block in memory.
// Returns TINFL_DECOMPRESS_MEM_TO_MEM_FAILED on failure, or the number of bytes written on success.
#define TINFL_DECOMPRESS_MEM_TO_MEM_FAILED ((size_t)(-1))
size_t tinfl_decompress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags);
// tinfl_decompress_mem_to_callback() decompresses a block in memory to an internal 32KB buffer, and a user provided callback function will be called to flush the buffer.
// Returns 1 on success or 0 on failure.
typedef int (*tinfl_put_buf_func_ptr)(const void *pBuf, int len, void *pUser);
int tinfl_decompress_mem_to_callback(const void *pIn_buf, size_t *pIn_buf_size, tinfl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
struct tinfl_decompressor_tag; typedef struct tinfl_decompressor_tag tinfl_decompressor;
// Max size of LZ dictionary.
#define TINFL_LZ_DICT_SIZE 32768
// Return status.
typedef enum {
TINFL_STATUS_BAD_PARAM = -3,
TINFL_STATUS_ADLER32_MISMATCH = -2,
TINFL_STATUS_FAILED = -1,
TINFL_STATUS_DONE = 0,
TINFL_STATUS_NEEDS_MORE_INPUT = 1,
TINFL_STATUS_HAS_MORE_OUTPUT = 2
} tinfl_status;
// Initializes the decompressor to its initial state.
#define tinfl_init(r) do { (r)->m_state = 0; } MZ_MACRO_END
#define tinfl_get_adler32(r) (r)->m_check_adler32
// Main low-level decompressor coroutine function. This is the only function actually needed for decompression. All the other functions are just high-level helpers for improved usability.
// This is a universal API, i.e. it can be used as a building block to build any desired higher level decompression API. In the limit case, it can be called once per every byte input or output.
tinfl_status tinfl_decompress(tinfl_decompressor *r, const mz_uint8 *pIn_buf_next, size_t *pIn_buf_size, mz_uint8 *pOut_buf_start, mz_uint8 *pOut_buf_next, size_t *pOut_buf_size, const mz_uint32 decomp_flags);
// Internal/private bits follow.
enum {
TINFL_MAX_HUFF_TABLES = 3, TINFL_MAX_HUFF_SYMBOLS_0 = 288, TINFL_MAX_HUFF_SYMBOLS_1 = 32, TINFL_MAX_HUFF_SYMBOLS_2 = 19,
TINFL_FAST_LOOKUP_BITS = 10, TINFL_FAST_LOOKUP_SIZE = 1 << TINFL_FAST_LOOKUP_BITS
};
typedef struct {
mz_uint8 m_code_size[TINFL_MAX_HUFF_SYMBOLS_0];
mz_int16 m_look_up[TINFL_FAST_LOOKUP_SIZE], m_tree[TINFL_MAX_HUFF_SYMBOLS_0 * 2];
} tinfl_huff_table;
#if MINIZ_HAS_64BIT_REGISTERS
#define TINFL_USE_64BIT_BITBUF 1
#endif
#if TINFL_USE_64BIT_BITBUF
typedef mz_uint64 tinfl_bit_buf_t;
#define TINFL_BITBUF_SIZE (64)
#else
typedef mz_uint32 tinfl_bit_buf_t;
#define TINFL_BITBUF_SIZE (32)
#endif
struct tinfl_decompressor_tag {
mz_uint32 m_state, m_num_bits, m_zhdr0, m_zhdr1, m_z_adler32, m_final, m_type, m_check_adler32, m_dist, m_counter, m_num_extra, m_table_sizes[TINFL_MAX_HUFF_TABLES];
tinfl_bit_buf_t m_bit_buf;
size_t m_dist_from_out_buf_start;
tinfl_huff_table m_tables[TINFL_MAX_HUFF_TABLES];
mz_uint8 m_raw_header[4], m_len_codes[TINFL_MAX_HUFF_SYMBOLS_0 + TINFL_MAX_HUFF_SYMBOLS_1 + 137];
};
// ------------------- Low-level Compression API Definitions
// Set TDEFL_LESS_MEMORY to 1 to use less memory (compression will be slightly slower, and raw/dynamic blocks will be output more frequently).
#define TDEFL_LESS_MEMORY 1
// tdefl_init() compression flags logically OR'd together (low 12 bits contain the max. number of probes per dictionary search):
// TDEFL_DEFAULT_MAX_PROBES: The compressor defaults to 128 dictionary probes per dictionary search. 0=Huffman only, 1=Huffman+LZ (fastest/crap compression), 4095=Huffman+LZ (slowest/best compression).
enum {
TDEFL_HUFFMAN_ONLY = 0, TDEFL_DEFAULT_MAX_PROBES = 128, TDEFL_MAX_PROBES_MASK = 0xFFF
};
// TDEFL_WRITE_ZLIB_HEADER: If set, the compressor outputs a zlib header before the deflate data, and the Adler-32 of the source data at the end. Otherwise, you'll get raw deflate data.
// TDEFL_COMPUTE_ADLER32: Always compute the adler-32 of the input data (even when not writing zlib headers).
// TDEFL_GREEDY_PARSING_FLAG: Set to use faster greedy parsing, instead of more efficient lazy parsing.
// TDEFL_NONDETERMINISTIC_PARSING_FLAG: Enable to decrease the compressor's initialization time to the minimum, but the output may vary from run to run given the same input (depending on the contents of memory).
// TDEFL_RLE_MATCHES: Only look for RLE matches (matches with a distance of 1)
// TDEFL_FILTER_MATCHES: Discards matches <= 5 chars if enabled.
// TDEFL_FORCE_ALL_STATIC_BLOCKS: Disable usage of optimized Huffman tables.
// TDEFL_FORCE_ALL_RAW_BLOCKS: Only use raw (uncompressed) deflate blocks.
// The low 12 bits are reserved to control the max # of hash probes per dictionary lookup (see TDEFL_MAX_PROBES_MASK).
enum {
TDEFL_WRITE_ZLIB_HEADER = 0x01000,
TDEFL_COMPUTE_ADLER32 = 0x02000,
TDEFL_GREEDY_PARSING_FLAG = 0x04000,
TDEFL_NONDETERMINISTIC_PARSING_FLAG = 0x08000,
TDEFL_RLE_MATCHES = 0x10000,
TDEFL_FILTER_MATCHES = 0x20000,
TDEFL_FORCE_ALL_STATIC_BLOCKS = 0x40000,
TDEFL_FORCE_ALL_RAW_BLOCKS = 0x80000
};
// High level compression functions:
// tdefl_compress_mem_to_heap() compresses a block in memory to a heap block allocated via malloc().
// On entry:
// pSrc_buf, src_buf_len: Pointer and size of source block to compress.
// flags: The max match finder probes (default is 128) logically OR'd against the above flags. Higher probes are slower but improve compression.
// On return:
// Function returns a pointer to the compressed data, or NULL on failure.
// *pOut_len will be set to the compressed data's size, which could be larger than src_buf_len on uncompressible data.
// The caller must free() the returned block when it's no longer needed.
void *tdefl_compress_mem_to_heap(const void *pSrc_buf, size_t src_buf_len, size_t *pOut_len, int flags);
// tdefl_compress_mem_to_mem() compresses a block in memory to another block in memory.
// Returns 0 on failure.
size_t tdefl_compress_mem_to_mem(void *pOut_buf, size_t out_buf_len, const void *pSrc_buf, size_t src_buf_len, int flags);
// Compresses an image to a compressed PNG file in memory.
// On entry:
// pImage, w, h, and num_chans describe the image to compress. num_chans may be 1, 2, 3, or 4.
// The image pitch in bytes per scanline will be w*num_chans. The leftmost pixel on the top scanline is stored first in memory.
// level may range from [0,10], use MZ_NO_COMPRESSION, MZ_BEST_SPEED, MZ_BEST_COMPRESSION, etc. or a decent default is MZ_DEFAULT_LEVEL
// If flip is true, the image will be flipped on the Y axis (useful for OpenGL apps).
// On return:
// Function returns a pointer to the compressed data, or NULL on failure.
// *pLen_out will be set to the size of the PNG image file.
// The caller must mz_free() the returned heap block (which will typically be larger than *pLen_out) when it's no longer needed.
void *tdefl_write_image_to_png_file_in_memory_ex(const void *pImage, int w, int h, int num_chans, size_t *pLen_out, mz_uint level, mz_bool flip);
void *tdefl_write_image_to_png_file_in_memory(const void *pImage, int w, int h, int num_chans, size_t *pLen_out);
// Output stream interface. The compressor uses this interface to write compressed data. It'll typically be called TDEFL_OUT_BUF_SIZE at a time.
typedef mz_bool (*tdefl_put_buf_func_ptr)(const void *pBuf, int len, void *pUser);
// tdefl_compress_mem_to_output() compresses a block to an output stream. The above helpers use this function internally.
mz_bool tdefl_compress_mem_to_output(const void *pBuf, size_t buf_len, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
enum { TDEFL_MAX_HUFF_TABLES = 3, TDEFL_MAX_HUFF_SYMBOLS_0 = 288, TDEFL_MAX_HUFF_SYMBOLS_1 = 32, TDEFL_MAX_HUFF_SYMBOLS_2 = 19, TDEFL_LZ_DICT_SIZE = 32768, TDEFL_LZ_DICT_SIZE_MASK = TDEFL_LZ_DICT_SIZE - 1, TDEFL_MIN_MATCH_LEN = 3, TDEFL_MAX_MATCH_LEN = 258 };
// TDEFL_OUT_BUF_SIZE MUST be large enough to hold a single entire compressed output block (using static/fixed Huffman codes).
#if TDEFL_LESS_MEMORY
enum { TDEFL_LZ_CODE_BUF_SIZE = 24 * 1024, TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13 ) / 10, TDEFL_MAX_HUFF_SYMBOLS = 288, TDEFL_LZ_HASH_BITS = 12, TDEFL_LEVEL1_HASH_SIZE_MASK = 4095, TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3, TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS };
#else
enum { TDEFL_LZ_CODE_BUF_SIZE = 64 * 1024, TDEFL_OUT_BUF_SIZE = (TDEFL_LZ_CODE_BUF_SIZE * 13 ) / 10, TDEFL_MAX_HUFF_SYMBOLS = 288, TDEFL_LZ_HASH_BITS = 15, TDEFL_LEVEL1_HASH_SIZE_MASK = 4095, TDEFL_LZ_HASH_SHIFT = (TDEFL_LZ_HASH_BITS + 2) / 3, TDEFL_LZ_HASH_SIZE = 1 << TDEFL_LZ_HASH_BITS };
#endif
// The low-level tdefl functions below may be used directly if the above helper functions aren't flexible enough. The low-level functions don't make any heap allocations, unlike the above helper functions.
typedef enum {
TDEFL_STATUS_BAD_PARAM = -2,
TDEFL_STATUS_PUT_BUF_FAILED = -1,
TDEFL_STATUS_OKAY = 0,
TDEFL_STATUS_DONE = 1,
} tdefl_status;
// Must map to MZ_NO_FLUSH, MZ_SYNC_FLUSH, etc. enums
typedef enum {
TDEFL_NO_FLUSH = 0,
TDEFL_SYNC_FLUSH = 2,
TDEFL_FULL_FLUSH = 3,
TDEFL_FINISH = 4
} tdefl_flush;
// tdefl's compression state structure.
typedef struct {
tdefl_put_buf_func_ptr m_pPut_buf_func;
void *m_pPut_buf_user;
mz_uint m_flags, m_max_probes[2];
int m_greedy_parsing;
mz_uint m_adler32, m_lookahead_pos, m_lookahead_size, m_dict_size;
mz_uint8 *m_pLZ_code_buf, *m_pLZ_flags, *m_pOutput_buf, *m_pOutput_buf_end;
mz_uint m_num_flags_left, m_total_lz_bytes, m_lz_code_buf_dict_pos, m_bits_in, m_bit_buffer;
mz_uint m_saved_match_dist, m_saved_match_len, m_saved_lit, m_output_flush_ofs, m_output_flush_remaining, m_finished, m_block_index, m_wants_to_finish;
tdefl_status m_prev_return_status;
const void *m_pIn_buf;
void *m_pOut_buf;
size_t *m_pIn_buf_size, *m_pOut_buf_size;
tdefl_flush m_flush;
const mz_uint8 *m_pSrc;
size_t m_src_buf_left, m_out_buf_ofs;
mz_uint8 m_dict[TDEFL_LZ_DICT_SIZE + TDEFL_MAX_MATCH_LEN - 1];
mz_uint16 m_huff_count[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
mz_uint16 m_huff_codes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
mz_uint8 m_huff_code_sizes[TDEFL_MAX_HUFF_TABLES][TDEFL_MAX_HUFF_SYMBOLS];
mz_uint8 m_lz_code_buf[TDEFL_LZ_CODE_BUF_SIZE];
mz_uint16 m_next[TDEFL_LZ_DICT_SIZE];
mz_uint16 m_hash[TDEFL_LZ_HASH_SIZE];
mz_uint8 m_output_buf[TDEFL_OUT_BUF_SIZE];
} tdefl_compressor;
// Initializes the compressor.
// There is no corresponding deinit() function because the tdefl API's do not dynamically allocate memory.
// pBut_buf_func: If NULL, output data will be supplied to the specified callback. In this case, the user should call the tdefl_compress_buffer() API for compression.
// If pBut_buf_func is NULL the user should always call the tdefl_compress() API.
// flags: See the above enums (TDEFL_HUFFMAN_ONLY, TDEFL_WRITE_ZLIB_HEADER, etc.)
tdefl_status tdefl_init(tdefl_compressor *d, tdefl_put_buf_func_ptr pPut_buf_func, void *pPut_buf_user, int flags);
// Compresses a block of data, consuming as much of the specified input buffer as possible, and writing as much compressed data to the specified output buffer as possible.
tdefl_status tdefl_compress(tdefl_compressor *d, const void *pIn_buf, size_t *pIn_buf_size, void *pOut_buf, size_t *pOut_buf_size, tdefl_flush flush);
// tdefl_compress_buffer() is only usable when the tdefl_init() is called with a non-NULL tdefl_put_buf_func_ptr.
// tdefl_compress_buffer() always consumes the entire input buffer.
tdefl_status tdefl_compress_buffer(tdefl_compressor *d, const void *pIn_buf, size_t in_buf_size, tdefl_flush flush);
tdefl_status tdefl_get_prev_return_status(tdefl_compressor *d);
mz_uint32 tdefl_get_adler32(tdefl_compressor *d);
// Can't use tdefl_create_comp_flags_from_zip_params if MINIZ_NO_ZLIB_APIS isn't defined, because it uses some of its macros.
#ifndef MINIZ_NO_ZLIB_APIS
// Create tdefl_compress() flags given zlib-style compression parameters.
// level may range from [0,10] (where 10 is absolute max compression, but may be much slower on some files)
// window_bits may be -15 (raw deflate) or 15 (zlib)
// strategy may be either MZ_DEFAULT_STRATEGY, MZ_FILTERED, MZ_HUFFMAN_ONLY, MZ_RLE, or MZ_FIXED
mz_uint tdefl_create_comp_flags_from_zip_params(int level, int window_bits, int strategy);
#endif // #ifndef MINIZ_NO_ZLIB_APIS
#ifdef __cplusplus
}
#endif

43
components/esp_rom/include/esp32s3/rom/rsa_pss.h Normal file
View File

@ -0,0 +1,43 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
#define ETS_SIG_LEN 384 /* Bytes */
#define ETS_DIGEST_LEN 32 /* SHA-256, bytes */
typedef struct {
uint8_t n[384]; /* Public key modulus */
uint32_t e; /* Public key exponent */
uint8_t rinv[384];
uint32_t mdash;
} ets_rsa_pubkey_t;
bool ets_rsa_pss_verify(const ets_rsa_pubkey_t *key, const uint8_t *sig, const uint8_t *digest);
void ets_mgf1_sha256(const uint8_t *mgfSeed, size_t seedLen, size_t maskLen, uint8_t *mask);
bool ets_emsa_pss_verify(const uint8_t *encoded_message, const uint8_t *mhash);
#ifdef __cplusplus
}
#endif

213
components/esp_rom/include/esp32s3/rom/rtc.h Normal file
View File

@ -0,0 +1,213 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdbool.h>
#include <stdint.h>
#include "ets_sys.h"
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup rtc_apis, rtc registers and memory related apis
* @brief rtc apis
*/
/** @addtogroup rtc_apis
* @{
*/
/**************************************************************************************
* Note: *
* Some Rtc memory and registers are used, in ROM or in internal library. *
* Please do not use reserved or used rtc memory or registers. *
* *
*************************************************************************************
* RTC Memory & Store Register usage
*************************************************************************************
* rtc memory addr type size usage
* 0x3f421000(0x50000000) Slow SIZE_CP Co-Processor code/Reset Entry
* 0x3f421000+SIZE_CP Slow 8192-SIZE_CP
*
* 0x3ff80000(0x40070000) Fast 8192 deep sleep entry code
*
*************************************************************************************
* RTC store registers usage
* RTC_CNTL_STORE0_REG Reserved
* RTC_CNTL_STORE1_REG RTC_SLOW_CLK calibration value
* RTC_CNTL_STORE2_REG Boot time, low word
* RTC_CNTL_STORE3_REG Boot time, high word
* RTC_CNTL_STORE4_REG External XTAL frequency
* RTC_CNTL_STORE5_REG APB bus frequency
* RTC_CNTL_STORE6_REG FAST_RTC_MEMORY_ENTRY
* RTC_CNTL_STORE7_REG FAST_RTC_MEMORY_CRC
*************************************************************************************
*/
#define RTC_SLOW_CLK_CAL_REG RTC_CNTL_STORE1_REG
#define RTC_BOOT_TIME_LOW_REG RTC_CNTL_STORE2_REG
#define RTC_BOOT_TIME_HIGH_REG RTC_CNTL_STORE3_REG
#define RTC_XTAL_FREQ_REG RTC_CNTL_STORE4_REG
#define RTC_APB_FREQ_REG RTC_CNTL_STORE5_REG
#define RTC_ENTRY_ADDR_REG RTC_CNTL_STORE6_REG
#define RTC_MEMORY_CRC_REG RTC_CNTL_STORE7_REG
typedef enum {
AWAKE = 0, //<CPU ON
LIGHT_SLEEP = BIT0, //CPU waiti, PLL ON. We don't need explicitly set this mode.
DEEP_SLEEP = BIT1 //CPU OFF, PLL OFF, only specific timer could wake up
} SLEEP_MODE;
typedef enum {
NO_MEAN = 0,
POWERON_RESET = 1, /**<1, Vbat power on reset*/
RTC_SW_SYS_RESET = 3, /**<3, Software reset digital core*/
DEEPSLEEP_RESET = 5, /**<5, Deep Sleep reset digital core*/
TG0WDT_SYS_RESET = 7, /**<7, Timer Group0 Watch dog reset digital core*/
TG1WDT_SYS_RESET = 8, /**<8, Timer Group1 Watch dog reset digital core*/
RTCWDT_SYS_RESET = 9, /**<9, RTC Watch dog Reset digital core*/
INTRUSION_RESET = 10, /**<10, Instrusion tested to reset CPU*/
TG0WDT_CPU_RESET = 11, /**<11, Time Group0 reset CPU*/
RTC_SW_CPU_RESET = 12, /**<12, Software reset CPU*/
RTCWDT_CPU_RESET = 13, /**<13, RTC Watch dog Reset CPU*/
RTCWDT_BROWN_OUT_RESET = 15, /**<15, Reset when the vdd voltage is not stable*/
RTCWDT_RTC_RESET = 16, /**<16, RTC Watch dog reset digital core and rtc module*/
TG1WDT_CPU_RESET = 17, /**<17, Time Group1 reset CPU*/
SUPER_WDT_RESET = 18, /**<18, super watchdog reset digital core and rtc module*/
GLITCH_RTC_RESET = 19, /**<19, glitch reset digital core and rtc module*/
EFUSE_RESET = 20, /**<20, efuse reset digital core*/
} RESET_REASON;
typedef enum {
NO_SLEEP = 0,
EXT_EVENT0_TRIG = BIT0,
EXT_EVENT1_TRIG = BIT1,
GPIO_TRIG = BIT2,
TIMER_EXPIRE = BIT3,
SDIO_TRIG = BIT4,
MAC_TRIG = BIT5,
UART0_TRIG = BIT6,
UART1_TRIG = BIT7,
TOUCH_TRIG = BIT8,
SAR_TRIG = BIT9,
BT_TRIG = BIT10,
RISCV_TRIG = BIT11,
XTAL_DEAD_TRIG = BIT12,
RISCV_TRAP_TRIG = BIT13,
USB_TRIG = BIT14
} WAKEUP_REASON;
typedef enum {
DISEN_WAKEUP = NO_SLEEP,
EXT_EVENT0_TRIG_EN = EXT_EVENT0_TRIG,
EXT_EVENT1_TRIG_EN = EXT_EVENT1_TRIG,
GPIO_TRIG_EN = GPIO_TRIG,
TIMER_EXPIRE_EN = TIMER_EXPIRE,
SDIO_TRIG_EN = SDIO_TRIG,
MAC_TRIG_EN = MAC_TRIG,
UART0_TRIG_EN = UART0_TRIG,
UART1_TRIG_EN = UART1_TRIG,
TOUCH_TRIG_EN = TOUCH_TRIG,
SAR_TRIG_EN = SAR_TRIG,
BT_TRIG_EN = BT_TRIG,
RISCV_TRIG_EN = RISCV_TRIG,
XTAL_DEAD_TRIG_EN = XTAL_DEAD_TRIG,
RISCV_TRAP_TRIG_EN = RISCV_TRAP_TRIG,
USB_TRIG_EN = USB_TRIG
} WAKEUP_ENABLE;
/**
* @brief Get the reset reason for CPU.
*
* @param int cpu_no : CPU no.
*
* @return RESET_REASON
*/
RESET_REASON rtc_get_reset_reason(int cpu_no);
/**
* @brief Get the wakeup cause for CPU.
*
* @param int cpu_no : CPU no.
*
* @return WAKEUP_REASON
*/
WAKEUP_REASON rtc_get_wakeup_cause(void);
/**
* @brief Get CRC for Fast RTC Memory.
*
* @param uint32_t start_addr : 0 - 0x7ff for Fast RTC Memory.
*
* @param uint32_t crc_len : 0 - 0x7ff, 0 for 4 byte, 0x7ff for 0x2000 byte.
*
* @return uint32_t : CRC32 result
*/
uint32_t calc_rtc_memory_crc(uint32_t start_addr, uint32_t crc_len);
/**
* @brief Set CRC of Fast RTC memory 0-0x7ff into RTC STORE7.
*
* @param None
*
* @return None
*/
void set_rtc_memory_crc(void);
/**
* @brief Fetch entry from RTC memory and RTC STORE reg
*
* @param uint32_t * entry_addr : the address to save entry
*
* @param RESET_REASON reset_reason : reset reason this time
*
* @return None
*/
void rtc_boot_control(uint32_t *entry_addr, RESET_REASON reset_reason);
/**
* @brief Software Reset digital core.
*
* It is not recommended to use this function in esp-idf, use
* esp_restart() instead.
*
* @param None
*
* @return None
*/
void software_reset(void);
/**
* @brief Software Reset digital core.
*
* It is not recommended to use this function in esp-idf, use
* esp_restart() instead.
*
* @param int cpu_no : The CPU to reset, 0 for PRO CPU, 1 for APP CPU.
*
* @return None
*/
void software_reset_cpu(int cpu_no);
/**
* @}
*/
#ifdef __cplusplus
}
#endif

102
components/esp_rom/include/esp32s3/rom/secure_boot.h Normal file
View File

@ -0,0 +1,102 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "rsa_pss.h"
#ifdef __cplusplus
extern "C" {
#endif
struct ets_secure_boot_sig_block;
struct ets_secure_boot_signature_t;
typedef struct ets_secure_boot_sig_block ets_secure_boot_sig_block_t;
typedef struct ets_secure_boot_signature ets_secure_boot_signature_t;
typedef struct ets_secure_boot_key_digests ets_secure_boot_key_digests_t;
/* Verify bootloader image (reconfigures cache to map,
loads trusted key digests from efuse)
If allow_key_revoke is true and aggressive revoke efuse is set,
any failed signature has its associated key revoked in efuse.
If result is ETS_OK, the "simple hash" of the bootloader
is copied into verified_hash.
*/
int ets_secure_boot_verify_bootloader(uint8_t *verified_hash, bool allow_key_revoke);
/* Verify bootloader image (reconfigures cache to map), with
key digests provided as parameters.)
Can be used to verify secure boot status before enabling
secure boot permanently.
If result is ETS_OK, the "simple hash" of the bootloader is
copied into verified_hash.
*/
int ets_secure_boot_verify_bootloader_with_keys(uint8_t *verified_hash, const ets_secure_boot_key_digests_t *trusted_keys);
/* Verify supplied signature against supplied digest, using
supplied trusted key digests.
Doesn't reconfigure cache or any other hardware access.
*/
int ets_secure_boot_verify_signature(const ets_secure_boot_signature_t *sig, const uint8_t *image_digest, const ets_secure_boot_key_digests_t *trusted_keys);
/* Read key digests from efuse. Any revoked/missing digests will be
marked as NULL
Returns 0 if at least one valid digest was found.
*/
int ets_secure_boot_read_key_digests(ets_secure_boot_key_digests_t *trusted_keys);
#define ETS_SECURE_BOOT_V2_SIGNATURE_MAGIC 0xE7
/* Secure Boot V2 signature block (up to 3 can be appended) */
struct ets_secure_boot_sig_block {
uint8_t magic_byte;
uint8_t version;
uint8_t _reserved1;
uint8_t _reserved2;
uint8_t image_digest[32];
ets_rsa_pubkey_t key;
uint8_t signature[384];
uint32_t block_crc;
uint8_t _padding[16];
};
_Static_assert(sizeof(ets_secure_boot_sig_block_t) == 1216, "ets_secure_boot_sig_block_t should occupy 1216 Bytes in memory");
#define SECURE_BOOT_NUM_BLOCKS 3
/* V2 Secure boot signature sector (up to 3 blocks) */
struct ets_secure_boot_signature {
ets_secure_boot_sig_block_t block[SECURE_BOOT_NUM_BLOCKS];
uint8_t _padding[4096 - (sizeof(ets_secure_boot_sig_block_t) * SECURE_BOOT_NUM_BLOCKS)];
};
_Static_assert(sizeof(ets_secure_boot_signature_t) == 4096, "ets_secure_boot_signature_t should occupy 4096 Bytes in memory");
struct ets_secure_boot_key_digests {
const void *key_digests[3];
bool allow_key_revoke;
};
#ifdef __cplusplus
}
#endif

63
components/esp_rom/include/esp32s3/rom/sha.h Normal file
View File

@ -0,0 +1,63 @@
// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "ets_sys.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
SHA1 = 0,
SHA2_224,
SHA2_256,
SHA2_384,
SHA2_512,
SHA2_512224,
SHA2_512256,
SHA2_512T,
SHA_TYPE_MAX
} SHA_TYPE;
typedef struct SHAContext {
bool start;
bool in_hardware; // Is this context currently in peripheral? Needs to be manually cleared if multiple SHAs are interleaved
SHA_TYPE type;
uint32_t state[16]; // For SHA1/SHA224/SHA256, used 8, other used 16
unsigned char buffer[128]; // For SHA1/SHA224/SHA256, used 64, other used 128
uint32_t total_bits[4];
} SHA_CTX;
void ets_sha_enable(void);
void ets_sha_disable(void);
ets_status_t ets_sha_init(SHA_CTX *ctx, SHA_TYPE type);
ets_status_t ets_sha_starts(SHA_CTX *ctx, uint16_t sha512_t);
void ets_sha_get_state(SHA_CTX *ctx);
void ets_sha_process(SHA_CTX *ctx, const unsigned char *input);
void ets_sha_update(SHA_CTX *ctx, const unsigned char *input, uint32_t input_bytes, bool update_ctx);
ets_status_t ets_sha_finish(SHA_CTX *ctx, unsigned char *output);
#ifdef __cplusplus
}
#endif

554
components/esp_rom/include/esp32s3/rom/spi_flash.h Normal file
View File

@ -0,0 +1,554 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "esp_attr.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup spi_flash_apis, spi flash operation related apis
* @brief spi_flash apis
*/
/** @addtogroup spi_flash_apis
* @{
*/
/*************************************************************
* Note
*************************************************************
* 1. ESP32 chip have 4 SPI slave/master, however, SPI0 is
* used as an SPI master to access Flash and ext-SRAM by
* Cache module. It will support Decryto read for Flash,
* read/write for ext-SRAM. And SPI1 is also used as an
* SPI master for Flash read/write and ext-SRAM read/write.
* It will support Encrypto write for Flash.
* 2. As an SPI master, SPI support Highest clock to 80M,
* however, Flash with 80M Clock should be configured
* for different Flash chips. If you want to use 80M
* clock We should use the SPI that is certified by
* Espressif. However, the certification is not started
* at the time, so please use 40M clock at the moment.
* 3. SPI Flash can use 2 lines or 4 lines mode. If you
* use 2 lines mode, you can save two pad SPIHD and
* SPIWP for gpio. ESP32 support configured SPI pad for
* Flash, the configuration is stored in efuse and flash.
* However, the configurations of pads should be certified
* by Espressif. If you use this function, please use 40M
* clock at the moment.
* 4. ESP32 support to use Common SPI command to configure
* Flash to QIO mode, if you failed to configure with fix
* command. With Common SPI Command, ESP32 can also provide
* a way to use same Common SPI command groups on different
* Flash chips.
* 5. This functions are not protected by packeting, Please use the
*************************************************************
*/
#define PERIPHS_SPI_FLASH_CMD SPI_MEM_CMD_REG(1)
#define PERIPHS_SPI_FLASH_ADDR SPI_MEM_ADDR_REG(1)
#define PERIPHS_SPI_FLASH_CTRL SPI_MEM_CTRL_REG(1)
#define PERIPHS_SPI_FLASH_CTRL1 SPI_MEM_CTRL1_REG(1)
#define PERIPHS_SPI_FLASH_STATUS SPI_MEM_RD_STATUS_REG(1)
#define PERIPHS_SPI_FLASH_USRREG SPI_MEM_USER_REG(1)
#define PERIPHS_SPI_FLASH_USRREG1 SPI_MEM_USER1_REG(1)
#define PERIPHS_SPI_FLASH_USRREG2 SPI_MEM_USER2_REG(1)
#define PERIPHS_SPI_FLASH_C0 SPI_MEM_W0_REG(1)
#define PERIPHS_SPI_FLASH_C1 SPI_MEM_W1_REG(1)
#define PERIPHS_SPI_FLASH_C2 SPI_MEM_W2_REG(1)
#define PERIPHS_SPI_FLASH_C3 SPI_MEM_W3_REG(1)
#define PERIPHS_SPI_FLASH_C4 SPI_MEM_W4_REG(1)
#define PERIPHS_SPI_FLASH_C5 SPI_MEM_W5_REG(1)
#define PERIPHS_SPI_FLASH_C6 SPI_MEM_W6_REG(1)
#define PERIPHS_SPI_FLASH_C7 SPI_MEM_W7_REG(1)
#define PERIPHS_SPI_FLASH_TX_CRC SPI_MEM_TX_CRC_REG(1)
#define SPI0_R_QIO_DUMMY_CYCLELEN 5
#define SPI0_R_QIO_ADDR_BITSLEN 23
#define SPI0_R_FAST_DUMMY_CYCLELEN 7
#define SPI0_R_DIO_DUMMY_CYCLELEN 3
#define SPI0_R_FAST_ADDR_BITSLEN 23
#define SPI0_R_SIO_ADDR_BITSLEN 23
#define SPI1_R_QIO_DUMMY_CYCLELEN 5
#define SPI1_R_QIO_ADDR_BITSLEN 23
#define SPI1_R_FAST_DUMMY_CYCLELEN 7
#define SPI1_R_DIO_DUMMY_CYCLELEN 3
#define SPI1_R_DIO_ADDR_BITSLEN 23
#define SPI1_R_FAST_ADDR_BITSLEN 23
#define SPI1_R_SIO_ADDR_BITSLEN 23
#define ESP_ROM_SPIFLASH_W_SIO_ADDR_BITSLEN 23
#define ESP_ROM_SPIFLASH_TWO_BYTE_STATUS_EN SPI_MEM_WRSR_2B
//SPI address register
#define ESP_ROM_SPIFLASH_BYTES_LEN 24
#define ESP_ROM_SPIFLASH_BUFF_BYTE_WRITE_NUM 32
#define ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM 16
#define ESP_ROM_SPIFLASH_BUFF_BYTE_READ_BITS 0xf
//SPI status register
#define ESP_ROM_SPIFLASH_BUSY_FLAG BIT0
#define ESP_ROM_SPIFLASH_WRENABLE_FLAG BIT1
#define ESP_ROM_SPIFLASH_BP0 BIT2
#define ESP_ROM_SPIFLASH_BP1 BIT3
#define ESP_ROM_SPIFLASH_BP2 BIT4
#define ESP_ROM_SPIFLASH_WR_PROTECT (ESP_ROM_SPIFLASH_BP0|ESP_ROM_SPIFLASH_BP1|ESP_ROM_SPIFLASH_BP2)
#define ESP_ROM_SPIFLASH_QE BIT9
#define FLASH_ID_GD25LQ32C 0xC86016
typedef enum {
ESP_ROM_SPIFLASH_QIO_MODE = 0,
ESP_ROM_SPIFLASH_QOUT_MODE,
ESP_ROM_SPIFLASH_DIO_MODE,
ESP_ROM_SPIFLASH_DOUT_MODE,
ESP_ROM_SPIFLASH_FASTRD_MODE,
ESP_ROM_SPIFLASH_SLOWRD_MODE
} esp_rom_spiflash_read_mode_t;
typedef enum {
ESP_ROM_SPIFLASH_RESULT_OK,
ESP_ROM_SPIFLASH_RESULT_ERR,
ESP_ROM_SPIFLASH_RESULT_TIMEOUT
} esp_rom_spiflash_result_t;
typedef struct {
uint32_t device_id;
uint32_t chip_size; // chip size in bytes
uint32_t block_size;
uint32_t sector_size;
uint32_t page_size;
uint32_t status_mask;
} esp_rom_spiflash_chip_t;
typedef struct {
uint8_t data_length;
uint8_t read_cmd0;
uint8_t read_cmd1;
uint8_t write_cmd;
uint16_t data_mask;
uint16_t data;
} esp_rom_spiflash_common_cmd_t;
/**
* @brief Fix the bug in SPI hardware communication with Flash/Ext-SRAM in High Speed.
* Please do not call this function in SDK.
*
* @param uint8_t spi: 0 for SPI0(Cache Access), 1 for SPI1(Flash read/write).
*
* @param uint8_t freqdiv: Pll is 80M, 4 for 20M, 3 for 26.7M, 2 for 40M, 1 for 80M.
*
* @return None
*/
void esp_rom_spiflash_fix_dummylen(uint8_t spi, uint8_t freqdiv);
/**
* @brief Select SPI Flash to QIO mode when WP pad is read from Flash.
* Please do not call this function in SDK.
*
* @param uint8_t wp_gpio_num: WP gpio number.
*
* @param uint32_t ishspi: 0 for spi, 1 for hspi, flash pad decided by strapping
* else, bit[5:0] spiclk, bit[11:6] spiq, bit[17:12] spid, bit[23:18] spics0, bit[29:24] spihd
*
* @return None
*/
void esp_rom_spiflash_select_qiomode(uint8_t wp_gpio_num, uint32_t ishspi);
/**
* @brief Set SPI Flash pad drivers.
* Please do not call this function in SDK.
*
* @param uint8_t wp_gpio_num: WP gpio number.
*
* @param uint32_t ishspi: 0 for spi, 1 for hspi, flash pad decided by strapping
* else, bit[5:0] spiclk, bit[11:6] spiq, bit[17:12] spid, bit[23:18] spics0, bit[29:24] spihd
*
* @param uint8_t *drvs: drvs[0]-bit[3:0] for cpiclk, bit[7:4] for spiq, drvs[1]-bit[3:0] for spid, drvs[1]-bit[7:4] for spid
* drvs[2]-bit[3:0] for spihd, drvs[2]-bit[7:4] for spiwp.
* Values usually read from falsh by rom code, function usually callde by rom code.
* if value with bit(3) set, the value is valid, bit[2:0] is the real value.
*
* @return None
*/
void esp_rom_spiflash_set_drvs(uint8_t wp_gpio_num, uint32_t ishspi, uint8_t *drvs);
/**
* @brief Select SPI Flash function for pads.
* Please do not call this function in SDK.
*
* @param uint32_t ishspi: 0 for spi, 1 for hspi, flash pad decided by strapping
* else, bit[5:0] spiclk, bit[11:6] spiq, bit[17:12] spid, bit[23:18] spics0, bit[29:24] spihd
*
* @return None
*/
void esp_rom_spiflash_select_padsfunc(uint32_t ishspi);
/**
* @brief SPI Flash init, clock divisor is 4, use 1 line Slow read mode.
* Please do not call this function in SDK.
*
* @param uint32_t ishspi: 0 for spi, 1 for hspi, flash pad decided by strapping
* else, bit[5:0] spiclk, bit[11:6] spiq, bit[17:12] spid, bit[23:18] spics0, bit[29:24] spihd
*
* @param uint8_t legacy: In legacy mode, more SPI command is used in line.
*
* @return None
*/
void esp_rom_spiflash_attach(uint32_t ishspi, bool legacy);
/**
* @brief SPI Read Flash status register. We use CMD 0x05 (RDSR).
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_chip_t *spi : The information for Flash, which is exported from ld file.
*
* @param uint32_t *status : The pointer to which to return the Flash status value.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : read OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : read error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : read timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_read_status(esp_rom_spiflash_chip_t *spi, uint32_t *status);
/**
* @brief SPI Read Flash status register bits 8-15. We use CMD 0x35 (RDSR2).
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_chip_t *spi : The information for Flash, which is exported from ld file.
*
* @param uint32_t *status : The pointer to which to return the Flash status value.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : read OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : read error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : read timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_read_statushigh(esp_rom_spiflash_chip_t *spi, uint32_t *status);
/**
* @brief Write status to Falsh status register.
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_chip_t *spi : The information for Flash, which is exported from ld file.
*
* @param uint32_t status_value : Value to .
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : write OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : write error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : write timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_write_status(esp_rom_spiflash_chip_t *spi, uint32_t status_value);
/**
* @brief Use a command to Read Flash status register.
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_chip_t *spi : The information for Flash, which is exported from ld file.
*
* @param uint32_t*status : The pointer to which to return the Flash status value.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : read OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : read error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : read timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_read_user_cmd(uint32_t *status, uint8_t cmd);
/**
* @brief Config SPI Flash read mode when init.
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_read_mode_t mode : QIO/QOUT/DIO/DOUT/FastRD/SlowRD.
*
* This function does not try to set the QIO Enable bit in the status register, caller is responsible for this.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : config OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : config error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : config timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_config_readmode(esp_rom_spiflash_read_mode_t mode);
/**
* @brief Config SPI Flash clock divisor.
* Please do not call this function in SDK.
*
* @param uint8_t freqdiv: clock divisor.
*
* @param uint8_t spi: 0 for SPI0, 1 for SPI1.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : config OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : config error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : config timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_config_clk(uint8_t freqdiv, uint8_t spi);
/**
* @brief Send CommonCmd to Flash so that is can go into QIO mode, some Flash use different CMD.
* Please do not call this function in SDK.
*
* @param esp_rom_spiflash_common_cmd_t *cmd : A struct to show the action of a command.
*
* @return uint16_t 0 : do not send command any more.
* 1 : go to the next command.
* n > 1 : skip (n - 1) commands.
*/
uint16_t esp_rom_spiflash_common_cmd(esp_rom_spiflash_common_cmd_t *cmd);
/**
* @brief Unlock SPI write protect.
* Please do not call this function in SDK.
*
* @param None.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Unlock OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Unlock error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Unlock timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_unlock(void);
/**
* @brief SPI write protect.
* Please do not call this function in SDK.
*
* @param None.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Lock OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Lock error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Lock timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_lock(void);
/**
* @brief Update SPI Flash parameter.
* Please do not call this function in SDK.
*
* @param uint32_t deviceId : Device ID read from SPI, the low 32 bit.
*
* @param uint32_t chip_size : The Flash size.
*
* @param uint32_t block_size : The Flash block size.
*
* @param uint32_t sector_size : The Flash sector size.
*
* @param uint32_t page_size : The Flash page size.
*
* @param uint32_t status_mask : The Mask used when read status from Flash(use single CMD).
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Update OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Update error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Update timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_config_param(uint32_t deviceId, uint32_t chip_size, uint32_t block_size,
uint32_t sector_size, uint32_t page_size, uint32_t status_mask);
/**
* @brief Erase whole flash chip.
* Please do not call this function in SDK.
*
* @param None
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Erase OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Erase error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Erase timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_erase_chip(void);
/**
* @brief Erase a 64KB block of flash
* Uses SPI flash command D8H.
* Please do not call this function in SDK.
*
* @param uint32_t block_num : Which block to erase.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Erase OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Erase error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Erase timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_erase_block(uint32_t block_num);
/**
* @brief Erase a sector of flash.
* Uses SPI flash command 20H.
* Please do not call this function in SDK.
*
* @param uint32_t sector_num : Which sector to erase.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Erase OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Erase error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Erase timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_erase_sector(uint32_t sector_num);
/**
* @brief Erase some sectors.
* Please do not call this function in SDK.
*
* @param uint32_t start_addr : Start addr to erase, should be sector aligned.
*
* @param uint32_t area_len : Length to erase, should be sector aligned.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Erase OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Erase error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Erase timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_erase_area(uint32_t start_addr, uint32_t area_len);
/**
* @brief Write Data to Flash, you should Erase it yourself if need.
* Please do not call this function in SDK.
*
* @param uint32_t dest_addr : Address to write, should be 4 bytes aligned.
*
* @param const uint32_t *src : The pointer to data which is to write.
*
* @param uint32_t len : Length to write, should be 4 bytes aligned.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Write OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Write error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Write timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_write(uint32_t dest_addr, const uint32_t *src, int32_t len);
/**
* @brief Read Data from Flash, you should Erase it yourself if need.
* Please do not call this function in SDK.
*
* @param uint32_t src_addr : Address to read, should be 4 bytes aligned.
*
* @param uint32_t *dest : The buf to read the data.
*
* @param uint32_t len : Length to read, should be 4 bytes aligned.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Read OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Read error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Read timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_read(uint32_t src_addr, uint32_t *dest, int32_t len);
/**
* @brief SPI1 go into encrypto mode.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void esp_rom_spiflash_write_encrypted_enable(void);
/**
* @brief Prepare 32 Bytes data to encrpto writing, you should Erase it yourself if need.
* Please do not call this function in SDK.
*
* @param uint32_t flash_addr : Address to write, should be 32 bytes aligned.
*
* @param uint32_t *data : The pointer to data which is to write.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Prepare OK.
* ESP_ROM_SPIFLASH_RESULT_ERR : Prepare error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Prepare timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_prepare_encrypted_data(uint32_t flash_addr, uint32_t *data);
/**
* @brief SPI1 go out of encrypto mode.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void esp_rom_spiflash_write_encrypted_disable(void);
/**
* @brief Write data to flash with transparent encryption.
* @note Sectors to be written should already be erased.
*
* @note Please do not call this function in SDK.
*
* @param uint32_t flash_addr : Address to write, should be 32 byte aligned.
*
* @param uint32_t *data : The pointer to data to write. Note, this pointer must
* be 32 bit aligned and the content of the data will be
* modified by the encryption function.
*
* @param uint32_t len : Length to write, should be 32 bytes aligned.
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Data written successfully.
* ESP_ROM_SPIFLASH_RESULT_ERR : Encryption write error.
* ESP_ROM_SPIFLASH_RESULT_TIMEOUT : Encrypto write timeout.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_write_encrypted(uint32_t flash_addr, uint32_t *data, uint32_t len);
/* TODO: figure out how to map these to their new names */
typedef enum {
SPI_ENCRYPT_DESTINATION_FLASH,
SPI_ENCRYPT_DESTINATION_PSRAM,
} SpiEncryptDest;
typedef esp_rom_spiflash_result_t SpiFlashOpResult;
SpiFlashOpResult SPI_Encrypt_Write(uint32_t flash_addr, const void *data, uint32_t len);
SpiFlashOpResult SPI_Encrypt_Write_Dest(SpiEncryptDest dest, uint32_t flash_addr, const void *data, uint32_t len);
void SPI_Write_Encrypt_Enable(void);
void SPI_Write_Encrypt_Disable(void);
/** @brief Wait until SPI flash write operation is complete
*
* @note Please do not call this function in SDK.
*
* Reads the Write In Progress bit of the SPI flash status register,
* repeats until this bit is zero (indicating write complete).
*
* @return ESP_ROM_SPIFLASH_RESULT_OK : Write is complete
* ESP_ROM_SPIFLASH_RESULT_ERR : Error while reading status.
*/
esp_rom_spiflash_result_t esp_rom_spiflash_wait_idle(esp_rom_spiflash_chip_t *spi);
/** @brief Enable Quad I/O pin functions
*
* @note Please do not call this function in SDK.
*
* Sets the HD & WP pin functions for Quad I/O modes, based on the
* efuse SPI pin configuration.
*
* @param wp_gpio_num - Number of the WP pin to reconfigure for quad I/O.
*
* @param spiconfig - Pin configuration, as returned from ets_efuse_get_spiconfig().
* - If this parameter is 0, default SPI pins are used and wp_gpio_num parameter is ignored.
* - If this parameter is 1, default HSPI pins are used and wp_gpio_num parameter is ignored.
* - For other values, this parameter encodes the HD pin number and also the CLK pin number. CLK pin selection is used
* to determine if HSPI or SPI peripheral will be used (use HSPI if CLK pin is the HSPI clock pin, otherwise use SPI).
* Both HD & WP pins are configured via GPIO matrix to map to the selected peripheral.
*/
void esp_rom_spiflash_select_qio_pins(uint8_t wp_gpio_num, uint32_t spiconfig);
/** @brief Global esp_rom_spiflash_chip_t structure used by ROM functions
*
*/
extern esp_rom_spiflash_chip_t g_rom_flashchip;
/**
* @}
*/
#ifdef __cplusplus
}
#endif

97
components/esp_rom/include/esp32s3/rom/tjpgd.h Normal file
View File

@ -0,0 +1,97 @@
/*----------------------------------------------------------------------------/
/ TJpgDec - Tiny JPEG Decompressor include file (C)ChaN, 2012
/----------------------------------------------------------------------------*/
#ifndef _TJPGDEC
#define _TJPGDEC
/*---------------------------------------------------------------------------*/
/* System Configurations */
#define JD_SZBUF 512 /* Size of stream input buffer */
#define JD_FORMAT 0 /* Output pixel format 0:RGB888 (3 BYTE/pix), 1:RGB565 (1 WORD/pix) */
#define JD_USE_SCALE 1 /* Use descaling feature for output */
#define JD_TBLCLIP 1 /* Use table for saturation (might be a bit faster but increases 1K bytes of code size) */
/*---------------------------------------------------------------------------*/
#ifdef __cplusplus
extern "C" {
#endif
/* These types must be 16-bit, 32-bit or larger integer */
typedef int INT;
typedef unsigned int UINT;
/* These types must be 8-bit integer */
typedef char CHAR;
typedef unsigned char UCHAR;
typedef unsigned char BYTE;
/* These types must be 16-bit integer */
typedef short SHORT;
typedef unsigned short USHORT;
typedef unsigned short WORD;
typedef unsigned short WCHAR;
/* These types must be 32-bit integer */
typedef long LONG;
typedef unsigned long ULONG;
typedef unsigned long DWORD;
/* Error code */
typedef enum {
JDR_OK = 0, /* 0: Succeeded */
JDR_INTR, /* 1: Interrupted by output function */
JDR_INP, /* 2: Device error or wrong termination of input stream */
JDR_MEM1, /* 3: Insufficient memory pool for the image */
JDR_MEM2, /* 4: Insufficient stream input buffer */
JDR_PAR, /* 5: Parameter error */
JDR_FMT1, /* 6: Data format error (may be damaged data) */
JDR_FMT2, /* 7: Right format but not supported */
JDR_FMT3 /* 8: Not supported JPEG standard */
} JRESULT;
/* Rectangular structure */
typedef struct {
WORD left, right, top, bottom;
} JRECT;
/* Decompressor object structure */
typedef struct JDEC JDEC;
struct JDEC {
UINT dctr; /* Number of bytes available in the input buffer */
BYTE *dptr; /* Current data read ptr */
BYTE *inbuf; /* Bit stream input buffer */
BYTE dmsk; /* Current bit in the current read byte */
BYTE scale; /* Output scaling ratio */
BYTE msx, msy; /* MCU size in unit of block (width, height) */
BYTE qtid[3]; /* Quantization table ID of each component */
SHORT dcv[3]; /* Previous DC element of each component */
WORD nrst; /* Restart inverval */
UINT width, height; /* Size of the input image (pixel) */
BYTE *huffbits[2][2]; /* Huffman bit distribution tables [id][dcac] */
WORD *huffcode[2][2]; /* Huffman code word tables [id][dcac] */
BYTE *huffdata[2][2]; /* Huffman decoded data tables [id][dcac] */
LONG *qttbl[4]; /* Dequaitizer tables [id] */
void *workbuf; /* Working buffer for IDCT and RGB output */
BYTE *mcubuf; /* Working buffer for the MCU */
void *pool; /* Pointer to available memory pool */
UINT sz_pool; /* Size of momory pool (bytes available) */
UINT (*infunc)(JDEC *, BYTE *, UINT); /* Pointer to jpeg stream input function */
void *device; /* Pointer to I/O device identifiler for the session */
};
/* TJpgDec API functions */
JRESULT jd_prepare (JDEC *, UINT(*)(JDEC *, BYTE *, UINT), void *, UINT, void *);
JRESULT jd_decomp (JDEC *, UINT(*)(JDEC *, void *, JRECT *), BYTE);
#ifdef __cplusplus
}
#endif
#endif /* _TJPGDEC */

436
components/esp_rom/include/esp32s3/rom/uart.h Normal file
View File

@ -0,0 +1,436 @@
// Copyright 2010-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include "ets_sys.h"
#include "soc/soc.h"
#include "soc/uart_reg.h"
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup uart_apis, uart configuration and communication related apis
* @brief uart apis
*/
/** @addtogroup uart_apis
* @{
*/
#define RX_BUFF_SIZE 0x400
#define TX_BUFF_SIZE 100
//uart int enalbe register ctrl bits
#define UART_RCV_INTEN BIT0
#define UART_TRX_INTEN BIT1
#define UART_LINE_STATUS_INTEN BIT2
//uart int identification ctrl bits
#define UART_INT_FLAG_MASK 0x0E
//uart fifo ctrl bits
#define UART_CLR_RCV_FIFO BIT1
#define UART_CLR_TRX_FIFO BIT2
#define UART_RCVFIFO_TRG_LVL_BITS BIT6
//uart line control bits
#define UART_DIV_LATCH_ACCESS_BIT BIT7
//uart line status bits
#define UART_RCV_DATA_RDY_FLAG BIT0
#define UART_RCV_OVER_FLOW_FLAG BIT1
#define UART_RCV_PARITY_ERR_FLAG BIT2
#define UART_RCV_FRAME_ERR_FLAG BIT3
#define UART_BRK_INT_FLAG BIT4
#define UART_TRX_FIFO_EMPTY_FLAG BIT5
#define UART_TRX_ALL_EMPTY_FLAG BIT6 // include fifo and shift reg
#define UART_RCV_ERR_FLAG BIT7
//send and receive message frame head
#define FRAME_FLAG 0x7E
typedef enum {
UART_LINE_STATUS_INT_FLAG = 0x06,
UART_RCV_FIFO_INT_FLAG = 0x04,
UART_RCV_TMOUT_INT_FLAG = 0x0C,
UART_TXBUFF_EMPTY_INT_FLAG = 0x02
} UartIntType; //consider bit0 for int_flag
typedef enum {
RCV_ONE_BYTE = 0x0,
RCV_FOUR_BYTE = 0x1,
RCV_EIGHT_BYTE = 0x2,
RCV_FOURTEEN_BYTE = 0x3
} UartRcvFifoTrgLvl;
typedef enum {
FIVE_BITS = 0x0,
SIX_BITS = 0x1,
SEVEN_BITS = 0x2,
EIGHT_BITS = 0x3
} UartBitsNum4Char;
typedef enum {
ONE_STOP_BIT = 1,
ONE_HALF_STOP_BIT = 2,
TWO_STOP_BIT = 3
} UartStopBitsNum;
typedef enum {
NONE_BITS = 0,
ODD_BITS = 2,
EVEN_BITS = 3
} UartParityMode;
typedef enum {
STICK_PARITY_DIS = 0,
STICK_PARITY_EN = 2
} UartExistParity;
typedef enum {
BIT_RATE_9600 = 9600,
BIT_RATE_19200 = 19200,
BIT_RATE_38400 = 38400,
BIT_RATE_57600 = 57600,
BIT_RATE_115200 = 115200,
BIT_RATE_230400 = 230400,
BIT_RATE_460800 = 460800,
BIT_RATE_921600 = 921600
} UartBautRate;
typedef enum {
NONE_CTRL,
HARDWARE_CTRL,
XON_XOFF_CTRL
} UartFlowCtrl;
typedef enum {
EMPTY,
UNDER_WRITE,
WRITE_OVER
} RcvMsgBuffState;
typedef struct {
uint8_t *pRcvMsgBuff;
uint8_t *pWritePos;
uint8_t *pReadPos;
uint8_t TrigLvl;
RcvMsgBuffState BuffState;
} RcvMsgBuff;
typedef struct {
uint32_t TrxBuffSize;
uint8_t *pTrxBuff;
} TrxMsgBuff;
typedef enum {
BAUD_RATE_DET,
WAIT_SYNC_FRM,
SRCH_MSG_HEAD,
RCV_MSG_BODY,
RCV_ESC_CHAR,
} RcvMsgState;
typedef struct {
UartBautRate baut_rate;
UartBitsNum4Char data_bits;
UartExistParity exist_parity;
UartParityMode parity; // chip size in byte
UartStopBitsNum stop_bits;
UartFlowCtrl flow_ctrl;
uint8_t buff_uart_no; //indicate which uart use tx/rx buffer
RcvMsgBuff rcv_buff;
// TrxMsgBuff trx_buff;
RcvMsgState rcv_state;
int received;
} UartDevice;
/**
* @brief Init uart device struct value and reset uart0/uart1 rx.
* Please do not call this function in SDK.
*
* @param rxBuffer, must be a pointer to RX_BUFF_SIZE bytes or NULL
*
* @return None
*/
void uartAttach(void *rxBuffer);
/**
* @brief Init uart0 or uart1 for UART download booting mode.
* Please do not call this function in SDK.
*
* @param uint8_t uart_no : 0 for UART0, else for UART1.
*
* @param uint32_t clock : clock used by uart module, to adjust baudrate.
*
* @return None
*/
void Uart_Init(uint8_t uart_no, uint32_t clock);
/**
* @brief Modify uart baudrate.
* This function will reset RX/TX fifo for uart.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @param uint32_t DivLatchValue : (clock << 4)/baudrate.
*
* @return None
*/
void uart_div_modify(uint8_t uart_no, uint32_t DivLatchValue);
/**
* @brief Init uart0 or uart1 for UART download booting mode.
* Please do not call this function in SDK.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @param uint8_t is_sync : 0, only one UART module, easy to detect, wait until detected;
* 1, two UART modules, hard to detect, detect and return.
*
* @return None
*/
int uart_baudrate_detect(uint8_t uart_no, uint8_t is_sync);
/**
* @brief Switch printf channel of uart_tx_one_char.
* Please do not call this function when printf.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @return None
*/
void uart_tx_switch(uint8_t uart_no);
/**
* @brief Switch message exchange channel for UART download booting.
* Please do not call this function in SDK.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @return None
*/
void uart_buff_switch(uint8_t uart_no);
/**
* @brief Output a char to printf channel, wait until fifo not full.
*
* @param None
*
* @return OK.
*/
STATUS uart_tx_one_char(uint8_t TxChar);
/**
* @brief Output a char to message exchange channel, wait until fifo not full.
* Please do not call this function in SDK.
*
* @param None
*
* @return OK.
*/
STATUS uart_tx_one_char2(uint8_t TxChar);
/**
* @brief Wait until uart tx full empty.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @return None.
*/
void uart_tx_flush(uint8_t uart_no);
/**
* @brief Wait until uart tx full empty and the last char send ok.
*
* @param uart_no : 0 for UART0, 1 for UART1, 2 for UART2
*
* The function defined in ROM code has a bug, so we define the correct version
* here for compatibility.
*/
void uart_tx_wait_idle(uint8_t uart_no);
/**
* @brief Get an input char from message channel.
* Please do not call this function in SDK.
*
* @param uint8_t *pRxChar : the pointer to store the char.
*
* @return OK for successful.
* FAIL for failed.
*/
STATUS uart_rx_one_char(uint8_t *pRxChar);
/**
* @brief Get an input char from message channel, wait until successful.
* Please do not call this function in SDK.
*
* @param None
*
* @return char : input char value.
*/
char uart_rx_one_char_block(void);
/**
* @brief Get an input string line from message channel.
* Please do not call this function in SDK.
*
* @param uint8_t *pString : the pointer to store the string.
*
* @param uint8_t MaxStrlen : the max string length, incude '\0'.
*
* @return OK.
*/
STATUS UartRxString(uint8_t *pString, uint8_t MaxStrlen);
/**
* @brief Process uart recevied information in the interrupt handler.
* Please do not call this function in SDK.
*
* @param void *para : the message receive buffer.
*
* @return None
*/
void uart_rx_intr_handler(void *para);
/**
* @brief Get an char from receive buffer.
* Please do not call this function in SDK.
*
* @param RcvMsgBuff *pRxBuff : the pointer to the struct that include receive buffer.
*
* @param uint8_t *pRxByte : the pointer to store the char.
*
* @return OK for successful.
* FAIL for failed.
*/
STATUS uart_rx_readbuff( RcvMsgBuff *pRxBuff, uint8_t *pRxByte);
/**
* @brief Get all chars from receive buffer.
* Please do not call this function in SDK.
*
* @param uint8_t *pCmdLn : the pointer to store the string.
*
* @return OK for successful.
* FAIL for failed.
*/
STATUS UartGetCmdLn(uint8_t *pCmdLn);
/**
* @brief Get uart configuration struct.
* Please do not call this function in SDK.
*
* @param None
*
* @return UartDevice * : uart configuration struct pointer.
*/
UartDevice *GetUartDevice(void);
/**
* @brief Send an packet to download tool, with SLIP escaping.
* Please do not call this function in SDK.
*
* @param uint8_t *p : the pointer to output string.
*
* @param int len : the string length.
*
* @return None.
*/
void send_packet(uint8_t *p, int len);
/**
* @brief Receive an packet from download tool, with SLIP escaping.
* Please do not call this function in SDK.
*
* @param uint8_t *p : the pointer to input string.
*
* @param int len : If string length > len, the string will be truncated.
*
* @param uint8_t is_sync : 0, only one UART module;
* 1, two UART modules.
*
* @return int : the length of the string.
*/
int recv_packet(uint8_t *p, int len, uint8_t is_sync);
/**
* @brief Send an packet to download tool, with SLIP escaping.
* Please do not call this function in SDK.
*
* @param uint8_t *pData : the pointer to input string.
*
* @param uint16_t DataLen : the string length.
*
* @return OK for successful.
* FAIL for failed.
*/
STATUS SendMsg(uint8_t *pData, uint16_t DataLen);
/**
* @brief Receive an packet from download tool, with SLIP escaping.
* Please do not call this function in SDK.
*
* @param uint8_t *pData : the pointer to input string.
*
* @param uint16_t MaxDataLen : If string length > MaxDataLen, the string will be truncated.
*
* @param uint8_t is_sync : 0, only one UART module;
* 1, two UART modules.
*
* @return OK for successful.
* FAIL for failed.
*/
STATUS RcvMsg(uint8_t *pData, uint16_t MaxDataLen, uint8_t is_sync);
/**
* @brief Check if this UART is in download connection.
* Please do not call this function in SDK.
*
* @param uint8_t uart_no : 0 for UART0, 1 for UART1.
*
* @return ETS_NO_BOOT = 0 for no.
* SEL_UART_BOOT = BIT(1) for yes.
*/
uint8_t UartConnCheck(uint8_t uart_no);
/**
* @brief Initialize the USB ACM UART
* Needs to be fed a buffer of at least 128 bytes, plus any rx buffer you may want to have.
*
* @param cdc_acm_work_mem Pointer to work mem for CDC-ACM code
* @param cdc_acm_work_mem_len Length of work mem
*/
void Uart_Init_USB(void *cdc_acm_work_mem, int cdc_acm_work_mem_len);
/**
* @brief Install handler to reset the chip when a RTS change has been detected on the CDC-ACM 'UART'.
*/
void uart_usb_enable_reset_on_rts(void);
extern UartDevice UartDev;
/**
* @}
*/
#ifdef __cplusplus
}
#endif