alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-19 14:26:01 -04:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

esp32h4: remove esp32h4 target from peripherals

Browse Source
This commit is contained in:
laokaiyao 2023-04-17 18:47:30 +08:00
parent 2300982af9
commit b7053b46ef
242 changed files with 54 additions and 103861 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

257
components/bootloader_support/bootloader_flash/src/bootloader_flash_config_esp32h4.c
View File

@ -1,257 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include <assert.h>
#include "string.h"
#include "sdkconfig.h"
#include "esp_err.h"
#include "esp_log.h"
#include "esp_rom_gpio.h"
#include "esp_rom_efuse.h"
#include "esp32h4/rom/gpio.h"
#include "esp32h4/rom/spi_flash.h"
#include "esp32h4/rom/efuse.h"
#include "soc/gpio_periph.h"
#include "soc/efuse_reg.h"
#include "soc/spi_reg.h"
#include "soc/spi_mem_reg.h"
#include "soc/soc_caps.h"
#include "flash_qio_mode.h"
#include "bootloader_flash_config.h"
#include "bootloader_common.h"
#include "bootloader_flash_priv.h"
#include "bootloader_init.h"
#include "hal/mmu_hal.h"
#include "hal/cache_hal.h"
#include "hal/mmu_ll.h"
#define FLASH_IO_MATRIX_DUMMY_40M 0
#define FLASH_IO_MATRIX_DUMMY_80M 0
void bootloader_flash_update_id()
{
esp_rom_spiflash_chip_t *chip = &rom_spiflash_legacy_data->chip;
chip->device_id = bootloader_read_flash_id();
}
void IRAM_ATTR bootloader_flash_cs_timing_config()
{
SET_PERI_REG_MASK(SPI_MEM_USER_REG(0), SPI_MEM_CS_HOLD_M | SPI_MEM_CS_SETUP_M);
SET_PERI_REG_BITS(SPI_MEM_CTRL2_REG(0), SPI_MEM_CS_HOLD_TIME_V, 0, SPI_MEM_CS_HOLD_TIME_S);
SET_PERI_REG_BITS(SPI_MEM_CTRL2_REG(0), SPI_MEM_CS_SETUP_TIME_V, 0, SPI_MEM_CS_SETUP_TIME_S);
SET_PERI_REG_MASK(SPI_MEM_USER_REG(1), SPI_MEM_CS_HOLD_M | SPI_MEM_CS_SETUP_M);
SET_PERI_REG_BITS(SPI_MEM_CTRL2_REG(1), SPI_MEM_CS_HOLD_TIME_V, 1, SPI_MEM_CS_HOLD_TIME_S);
SET_PERI_REG_BITS(SPI_MEM_CTRL2_REG(1), SPI_MEM_CS_SETUP_TIME_V, 0, SPI_MEM_CS_SETUP_TIME_S);
}
void IRAM_ATTR bootloader_flash_clock_config(const esp_image_header_t *pfhdr)
{
uint32_t spi_clk_div = 0;
switch (pfhdr->spi_speed) {
case ESP_IMAGE_SPI_SPEED_DIV_1:
spi_clk_div = 1;
break;
case ESP_IMAGE_SPI_SPEED_DIV_2:
spi_clk_div = 2;
break;
case ESP_IMAGE_SPI_SPEED_DIV_3:
spi_clk_div = 3;
break;
case ESP_IMAGE_SPI_SPEED_DIV_4:
spi_clk_div = 4;
break;
default:
break;
}
esp_rom_spiflash_config_clk(spi_clk_div, 0);
}
void IRAM_ATTR bootloader_flash_set_dummy_out(void)
{
REG_SET_BIT(SPI_MEM_CTRL_REG(0), SPI_MEM_FDUMMY_OUT | SPI_MEM_D_POL | SPI_MEM_Q_POL);
REG_SET_BIT(SPI_MEM_CTRL_REG(1), SPI_MEM_FDUMMY_OUT | SPI_MEM_D_POL | SPI_MEM_Q_POL);
}
void IRAM_ATTR bootloader_flash_dummy_config(const esp_image_header_t *pfhdr)
{
bootloader_configure_spi_pins(1);
bootloader_flash_set_dummy_out();
}
static const char *TAG = "boot.esp32h4";
void IRAM_ATTR bootloader_configure_spi_pins(int drv)
{
const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
uint8_t wp_pin = esp_rom_efuse_get_flash_wp_gpio();
uint8_t clk_gpio_num = SPI_CLK_GPIO_NUM;
uint8_t q_gpio_num = SPI_Q_GPIO_NUM;
uint8_t d_gpio_num = SPI_D_GPIO_NUM;
uint8_t cs0_gpio_num = SPI_CS0_GPIO_NUM;
uint8_t hd_gpio_num = SPI_HD_GPIO_NUM;
uint8_t wp_gpio_num = SPI_WP_GPIO_NUM;
if (spiconfig == 0) {
} else {
clk_gpio_num = spiconfig & 0x3f;
q_gpio_num = (spiconfig >> 6) & 0x3f;
d_gpio_num = (spiconfig >> 12) & 0x3f;
cs0_gpio_num = (spiconfig >> 18) & 0x3f;
hd_gpio_num = (spiconfig >> 24) & 0x3f;
wp_gpio_num = wp_pin;
}
esp_rom_gpio_pad_set_drv(clk_gpio_num, drv);
esp_rom_gpio_pad_set_drv(q_gpio_num, drv);
esp_rom_gpio_pad_set_drv(d_gpio_num, drv);
esp_rom_gpio_pad_set_drv(cs0_gpio_num, drv);
if (hd_gpio_num <= MAX_PAD_GPIO_NUM) {
esp_rom_gpio_pad_set_drv(hd_gpio_num, drv);
}
if (wp_gpio_num <= MAX_PAD_GPIO_NUM) {
esp_rom_gpio_pad_set_drv(wp_gpio_num, drv);
}
}
static void update_flash_config(const esp_image_header_t *bootloader_hdr)
{
uint32_t size;
switch (bootloader_hdr->spi_size) {
case ESP_IMAGE_FLASH_SIZE_1MB:
size = 1;
break;
case ESP_IMAGE_FLASH_SIZE_2MB:
size = 2;
break;
case ESP_IMAGE_FLASH_SIZE_4MB:
size = 4;
break;
case ESP_IMAGE_FLASH_SIZE_8MB:
size = 8;
break;
case ESP_IMAGE_FLASH_SIZE_16MB:
size = 16;
break;
default:
size = 2;
}
cache_hal_disable(CACHE_TYPE_ALL);
// Set flash chip size
esp_rom_spiflash_config_param(rom_spiflash_legacy_data->chip.device_id, size * 0x100000, 0x10000, 0x1000, 0x100, 0xffff); // TODO: set mode
cache_hal_enable(CACHE_TYPE_ALL);
}
static void print_flash_info(const esp_image_header_t *bootloader_hdr)
{
ESP_EARLY_LOGD(TAG, "magic %02x", bootloader_hdr->magic);
ESP_EARLY_LOGD(TAG, "segments %02x", bootloader_hdr->segment_count);
ESP_EARLY_LOGD(TAG, "spi_mode %02x", bootloader_hdr->spi_mode);
ESP_EARLY_LOGD(TAG, "spi_speed %02x", bootloader_hdr->spi_speed);
ESP_EARLY_LOGD(TAG, "spi_size %02x", bootloader_hdr->spi_size);
const char *str;
switch (bootloader_hdr->spi_speed) {
case ESP_IMAGE_SPI_SPEED_DIV_2:
str = "24MHz";
break;
case ESP_IMAGE_SPI_SPEED_DIV_3:
str = "16MHz";
break;
case ESP_IMAGE_SPI_SPEED_DIV_4:
str = "12MHz";
break;
case ESP_IMAGE_SPI_SPEED_DIV_1:
str = "48MHz";
break;
default:
str = "12MHz";
break;
}
ESP_EARLY_LOGI(TAG, "SPI Speed : %s", str);
/* SPI mode could have been set to QIO during boot already,
so test the SPI registers not the flash header */
esp_rom_spiflash_read_mode_t spi_mode = bootloader_flash_get_spi_mode();
switch (spi_mode) {
case ESP_ROM_SPIFLASH_QIO_MODE:
str = "QIO";
break;
case ESP_ROM_SPIFLASH_QOUT_MODE:
str = "QOUT";
break;
case ESP_ROM_SPIFLASH_DIO_MODE:
str = "DIO";
break;
case ESP_ROM_SPIFLASH_DOUT_MODE:
str = "DOUT";
break;
case ESP_ROM_SPIFLASH_FASTRD_MODE:
str = "FAST READ";
break;
default:
str = "SLOW READ";
break;
}
ESP_EARLY_LOGI(TAG, "SPI Mode : %s", str);
switch (bootloader_hdr->spi_size) {
case ESP_IMAGE_FLASH_SIZE_1MB:
str = "1MB";
break;
case ESP_IMAGE_FLASH_SIZE_2MB:
str = "2MB";
break;
case ESP_IMAGE_FLASH_SIZE_4MB:
str = "4MB";
break;
case ESP_IMAGE_FLASH_SIZE_8MB:
str = "8MB";
break;
case ESP_IMAGE_FLASH_SIZE_16MB:
str = "16MB";
break;
default:
str = "2MB";
break;
}
ESP_EARLY_LOGI(TAG, "SPI Flash Size : %s", str);
}
static void IRAM_ATTR bootloader_init_flash_configure(void)
{
bootloader_flash_dummy_config(&bootloader_image_hdr);
bootloader_flash_cs_timing_config();
}
static void bootloader_spi_flash_resume(void)
{
bootloader_execute_flash_command(CMD_RESUME, 0, 0, 0);
esp_rom_spiflash_wait_idle(&g_rom_flashchip);
}
esp_err_t bootloader_init_spi_flash(void)
{
bootloader_init_flash_configure();
#ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
const uint32_t spiconfig = esp_rom_efuse_get_flash_gpio_info();
if (spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_SPI && spiconfig != ESP_ROM_EFUSE_FLASH_DEFAULT_HSPI) {
ESP_EARLY_LOGE(TAG, "SPI flash pins are overridden. Enable CONFIG_SPI_FLASH_ROM_DRIVER_PATCH in menuconfig");
return ESP_FAIL;
}
#endif
bootloader_spi_flash_resume();
bootloader_flash_unlock();
#if CONFIG_ESPTOOLPY_FLASHMODE_QIO || CONFIG_ESPTOOLPY_FLASHMODE_QOUT
bootloader_enable_qio_mode();
#endif
print_flash_info(&bootloader_image_hdr);
update_flash_config(&bootloader_image_hdr);
//ensure the flash is write-protected
bootloader_enable_wp();
return ESP_OK;
}

155
components/bootloader_support/src/esp32h4/bootloader_esp32h4.c
View File

@ -1,155 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "sdkconfig.h"
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_image_format.h"
#include "flash_qio_mode.h"
#include "esp_rom_gpio.h"
#include "esp_rom_efuse.h"
#include "esp_rom_uart.h"
#include "esp_rom_sys.h"
#include "esp_rom_spiflash.h"
#include "soc/efuse_reg.h"
#include "soc/gpio_sig_map.h"
#include "soc/io_mux_reg.h"
#include "soc/assist_debug_reg.h"
#include "esp_cpu.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/spi_periph.h"
#include "soc/extmem_reg.h"
#include "soc/io_mux_reg.h"
#include "soc/system_reg.h"
#include "esp32h4/rom/efuse.h"
#include "esp32h4/rom/ets_sys.h"
#include "bootloader_common.h"
#include "bootloader_init.h"
#include "bootloader_clock.h"
#include "bootloader_flash_config.h"
#include "bootloader_mem.h"
#include "bootloader_console.h"
#include "bootloader_flash_priv.h"
#include "bootloader_soc.h"
#include "esp_private/bootloader_flash_internal.h"
#include "hal/mmu_hal.h"
#include "hal/cache_hal.h"
static const char *TAG = "boot.esp32h4";
static void wdt_reset_cpu0_info_enable(void)
{
REG_SET_BIT(SYSTEM_CPU_PERI_CLK_EN_REG, SYSTEM_CLK_EN_ASSIST_DEBUG);
REG_CLR_BIT(SYSTEM_CPU_PERI_RST_EN_REG, SYSTEM_RST_EN_ASSIST_DEBUG);
REG_WRITE(ASSIST_DEBUG_CORE_0_RCD_EN_REG, ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN | ASSIST_DEBUG_CORE_0_RCD_RECORDEN);
}
static void wdt_reset_info_dump(int cpu)
{
(void) cpu;
// saved PC was already printed by the ROM bootloader.
// nothing to do here.
}
static void bootloader_check_wdt_reset(void)
{
int wdt_rst = 0;
soc_reset_reason_t rst_reason = esp_rom_get_reset_reason(0);
if (rst_reason == RESET_REASON_CORE_RTC_WDT || rst_reason == RESET_REASON_CORE_MWDT0 || rst_reason == RESET_REASON_CORE_MWDT1 ||
rst_reason == RESET_REASON_CPU0_MWDT0 || rst_reason == RESET_REASON_CPU0_MWDT1 || rst_reason == RESET_REASON_CPU0_RTC_WDT) {
ESP_LOGW(TAG, "PRO CPU has been reset by WDT.");
wdt_rst = 1;
}
if (wdt_rst) {
// if reset by WDT dump info from trace port
wdt_reset_info_dump(0);
}
wdt_reset_cpu0_info_enable();
}
static void bootloader_super_wdt_auto_feed(void)
{
REG_WRITE(RTC_CNTL_SWD_WPROTECT_REG, RTC_CNTL_SWD_WKEY_VALUE);
REG_SET_BIT(RTC_CNTL_SWD_CONF_REG, RTC_CNTL_SWD_AUTO_FEED_EN);
REG_WRITE(RTC_CNTL_SWD_WPROTECT_REG, 0);
}
static inline void bootloader_hardware_init(void)
{
}
static inline void bootloader_ana_reset_config(void)
{
//Enable WDT, BOD, and GLITCH reset
bootloader_ana_super_wdt_reset_config(true);
bootloader_ana_bod_reset_config(true);
bootloader_ana_clock_glitch_reset_config(true);
}
esp_err_t bootloader_init(void)
{
esp_err_t ret = ESP_OK;
bootloader_hardware_init();
bootloader_ana_reset_config();
bootloader_super_wdt_auto_feed();
// In RAM_APP, memory will be initialized in `call_start_cpu0`
#if !CONFIG_APP_BUILD_TYPE_RAM
// protect memory region
bootloader_init_mem();
/* check that static RAM is after the stack */
assert(&_bss_start <= &_bss_end);
assert(&_data_start <= &_data_end);
// clear bss section
bootloader_clear_bss_section();
#endif // !CONFIG_APP_BUILD_TYPE_RAM
// config clock
bootloader_clock_configure();
// initialize console, from now on, we can use esp_log
bootloader_console_init();
/* print 2nd bootloader banner */
bootloader_print_banner();
#if !CONFIG_APP_BUILD_TYPE_PURE_RAM_APP
//init cache hal
cache_hal_init(); //TODO IDF-4649
//init mmu
mmu_hal_init();
// update flash ID
bootloader_flash_update_id();
// Check and run XMC startup flow
if ((ret = bootloader_flash_xmc_startup()) != ESP_OK) {
ESP_LOGE(TAG, "failed when running XMC startup flow, reboot!");
return ret;
}
#if !CONFIG_APP_BUILD_TYPE_RAM
// read bootloader header
if ((ret = bootloader_read_bootloader_header()) != ESP_OK) {
return ret;
}
// read chip revision and check if it's compatible to bootloader
if ((ret = bootloader_check_bootloader_validity()) != ESP_OK) {
return ret;
}
#endif // !CONFIG_APP_BUILD_TYPE_RAM
// initialize spi flash
if ((ret = bootloader_init_spi_flash()) != ESP_OK) {
return ret;
}
#endif // #if !CONFIG_APP_BUILD_TYPE_PURE_RAM_APP
// check whether a WDT reset happend
bootloader_check_wdt_reset();
// config WDT
bootloader_config_wdt();
// enable RNG early entropy source
bootloader_enable_random();
return ret;
}

40
components/bootloader_support/src/esp32h4/bootloader_sha.c
View File

@ -1,40 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "bootloader_sha.h"
#include <stdbool.h>
#include <string.h>
#include <assert.h>
#include <sys/param.h>
#include "esp32h4/rom/sha.h"
static SHA_CTX ctx;
bootloader_sha256_handle_t bootloader_sha256_start()
{
// Enable SHA hardware
ets_sha_enable();
ets_sha_init(&ctx, SHA2_256);
return &ctx; // Meaningless non-NULL value
}
void bootloader_sha256_data(bootloader_sha256_handle_t handle, const void *data, size_t data_len)
{
assert(handle != NULL);
assert(data_len % 4 == 0);
ets_sha_update(&ctx, data, data_len, false);
}
void bootloader_sha256_finish(bootloader_sha256_handle_t handle, uint8_t *digest)
{
assert(handle != NULL);
if (digest == NULL) {
bzero(&ctx, sizeof(ctx));
return;
}
ets_sha_finish(&ctx, digest);
}

41
components/bootloader_support/src/esp32h4/bootloader_soc.c
View File

@ -1,41 +0,0 @@
/*
* SPDX-FileCopyrightText: 2019-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
void bootloader_ana_super_wdt_reset_config(bool enable)
{
REG_CLR_BIT(RTC_CNTL_FIB_SEL_REG, RTC_CNTL_FIB_SUPER_WDT_RST);
if (enable) {
REG_CLR_BIT(RTC_CNTL_SWD_CONF_REG, RTC_CNTL_SWD_BYPASS_RST);
} else {
REG_SET_BIT(RTC_CNTL_SWD_CONF_REG, RTC_CNTL_SWD_BYPASS_RST);
}
}
void bootloader_ana_bod_reset_config(bool enable)
{
REG_CLR_BIT(RTC_CNTL_FIB_SEL_REG, RTC_CNTL_FIB_BOD_RST);
if (enable) {
REG_SET_BIT(RTC_CNTL_BROWN_OUT_REG, RTC_CNTL_BROWN_OUT_ANA_RST_EN);
} else {
REG_CLR_BIT(RTC_CNTL_BROWN_OUT_REG, RTC_CNTL_BROWN_OUT_ANA_RST_EN);
}
}
void bootloader_ana_clock_glitch_reset_config(bool enable)
{
REG_CLR_BIT(RTC_CNTL_FIB_SEL_REG, RTC_CNTL_FIB_GLITCH_RST);
if (enable) {
REG_SET_BIT(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_GLITCH_RST_EN);
} else {
REG_CLR_BIT(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_GLITCH_RST_EN);
}
}

59
components/bootloader_support/src/esp32h4/flash_encryption_secure_features.c
View File

@ -1,59 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <strings.h>
#include "esp_flash_encrypt.h"
#include "esp_secure_boot.h"
#include "esp_efuse.h"
#include "esp_efuse_table.h"
#include "esp_log.h"
#include "sdkconfig.h"
static __attribute__((unused)) const char *TAG = "flash_encrypt";
esp_err_t esp_flash_encryption_enable_secure_features(void)
{
#ifndef CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
ESP_LOGI(TAG, "Disable UART bootloader encryption...");
esp_efuse_write_field_bit(ESP_EFUSE_DIS_DOWNLOAD_MANUAL_ENCRYPT);
#else
ESP_LOGW(TAG, "Not disabling UART bootloader encryption");
#endif
#ifndef CONFIG_SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE
ESP_LOGI(TAG, "Disable UART bootloader cache...");
esp_efuse_write_field_bit(ESP_EFUSE_DIS_DOWNLOAD_ICACHE);
#else
ESP_LOGW(TAG, "Not disabling UART bootloader cache - SECURITY COMPROMISED");
#endif
#ifndef CONFIG_SECURE_BOOT_ALLOW_JTAG
ESP_LOGI(TAG, "Disable JTAG...");
esp_efuse_write_field_bit(ESP_EFUSE_DIS_PAD_JTAG);
esp_efuse_write_field_bit(ESP_EFUSE_DIS_USB_JTAG);
#else
ESP_LOGW(TAG, "Not disabling JTAG - SECURITY COMPROMISED");
#endif
esp_efuse_write_field_bit(ESP_EFUSE_DIS_DIRECT_BOOT);
#if defined(CONFIG_SECURE_BOOT_V2_ENABLED) && !defined(CONFIG_SECURE_BOOT_V2_ALLOW_EFUSE_RD_DIS)
// This bit is set when enabling Secure Boot V2, but we can't enable it until this later point in the first boot
// otherwise the Flash Encryption key cannot be read protected
esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_RD_DIS);
#endif
#ifndef CONFIG_SECURE_FLASH_SKIP_WRITE_PROTECTION_CACHE
// Set write-protection for DIS_ICACHE to prevent bricking chip in case it will be set accidentally.
// esp32h4 has DIS_ICACHE. Write-protection bit = 2.
// List of eFuses with the same write protection bit:
// DIS_ICACHE, DIS_USB_JTAG, POWERGLITCH_EN, DIS_FORCE_DOWNLOAD, SPI_DOWNLOAD_MSPI_DIS,
// DIS_TWAI, JTAG_SEL_ENABLE, DIS_PAD_JTAG, DIS_DOWNLOAD_MANUAL_ENCRYPT
esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_DIS_ICACHE);
#endif
return ESP_OK;
}

70
components/bootloader_support/src/esp32h4/secure_boot_secure_features.c
View File

@ -1,70 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <strings.h>
#include "esp_flash_encrypt.h"
#include "esp_secure_boot.h"
#include "esp_efuse.h"
#include "esp_efuse_table.h"
#include "esp_log.h"
#include "sdkconfig.h"
static __attribute__((unused)) const char *TAG = "secure_boot";
esp_err_t esp_secure_boot_enable_secure_features(void)
{
esp_efuse_write_field_bit(ESP_EFUSE_DIS_DIRECT_BOOT);
#ifdef CONFIG_SECURE_ENABLE_SECURE_ROM_DL_MODE
ESP_LOGI(TAG, "Enabling Security download mode...");
esp_err_t err = esp_efuse_enable_rom_secure_download_mode();
if (err != ESP_OK) {
ESP_LOGE(TAG, "Could not enable Security download mode...");
return err;
}
#elif CONFIG_SECURE_DISABLE_ROM_DL_MODE
ESP_LOGI(TAG, "Disable ROM Download mode...");
esp_err_t err = esp_efuse_disable_rom_download_mode();
if (err != ESP_OK) {
ESP_LOGE(TAG, "Could not disable ROM Download mode...");
return err;
}
#else
ESP_LOGW(TAG, "UART ROM Download mode kept enabled - SECURITY COMPROMISED");
#endif
#ifndef CONFIG_SECURE_BOOT_ALLOW_JTAG
ESP_LOGI(TAG, "Disable hardware & software JTAG...");
esp_efuse_write_field_bit(ESP_EFUSE_DIS_PAD_JTAG);
esp_efuse_write_field_bit(ESP_EFUSE_DIS_USB_JTAG);
esp_efuse_write_field_cnt(ESP_EFUSE_SOFT_DIS_JTAG, ESP_EFUSE_SOFT_DIS_JTAG[0]->bit_count);
#else
ESP_LOGW(TAG, "Not disabling JTAG - SECURITY COMPROMISED");
#endif
#ifdef CONFIG_SECURE_BOOT_ENABLE_AGGRESSIVE_KEY_REVOKE
esp_efuse_write_field_bit(ESP_EFUSE_SECURE_BOOT_AGGRESSIVE_REVOKE);
#endif
esp_efuse_write_field_bit(ESP_EFUSE_SECURE_BOOT_EN);
#ifndef CONFIG_SECURE_BOOT_V2_ALLOW_EFUSE_RD_DIS
bool rd_dis_now = true;
#ifdef CONFIG_SECURE_FLASH_ENC_ENABLED
/* If flash encryption is not enabled yet then don't read-disable efuses yet, do it later in the boot
when Flash Encryption is being enabled */
rd_dis_now = esp_flash_encryption_enabled();
#endif
if (rd_dis_now) {
ESP_LOGI(TAG, "Prevent read disabling of additional efuses...");
esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_RD_DIS);
}
#else
ESP_LOGW(TAG, "Allowing read disabling of additional efuses - SECURITY COMPROMISED");
#endif
return ESP_OK;
}

4
components/driver/deprecated/driver/adc_types_legacy.h
View File

@ -61,7 +61,7 @@ typedef enum {
ADC1_CHANNEL_9, /*!< ADC1 channel 9 is GPIO10 */
ADC1_CHANNEL_MAX,
} adc1_channel_t;
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32H4
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2
typedef enum {
ADC1_CHANNEL_0 = 0, /*!< ADC1 channel 0 is GPIO0 */
ADC1_CHANNEL_1, /*!< ADC1 channel 1 is GPIO1 */
@ -97,7 +97,7 @@ typedef enum {
ADC2_CHANNEL_9, /*!< ADC2 channel 9 is GPIO26 (ESP32), GPIO20 (ESP32-S2) */
ADC2_CHANNEL_MAX,
} adc2_channel_t;
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32H4
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2
// ESP32C6 has no ADC2
typedef enum {
ADC2_CHANNEL_0 = 0, /*!< ADC2 channel 0 is GPIO5 */

4
components/driver/test/test_i2c.c
View File

@ -32,7 +32,7 @@
#define RW_TEST_LENGTH 129 /*!<Data length for r/w test, any value from 0-DATA_LENGTH*/
#define DELAY_TIME_BETWEEN_ITEMS_MS 1234 /*!< delay time between different test items */
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32H4
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3
#define I2C_SLAVE_SCL_IO 5 /*!<gpio number for i2c slave clock */
#define I2C_SLAVE_SDA_IO 6 /*!<gpio number for i2c slave data */
#else
@ -44,7 +44,7 @@
#define I2C_SLAVE_TX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave tx buffer size */
#define I2C_SLAVE_RX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave rx buffer size */
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H4
#if CONFIG_IDF_TARGET_ESP32C3
#define I2C_MASTER_SCL_IO 5 /*!<gpio number for i2c master clock */
#define I2C_MASTER_SDA_IO 6 /*!<gpio number for i2c master data */
#elif CONFIG_IDF_TARGET_ESP32S3

3
components/esp_hw_support/esp_clk.c
View File

@ -29,9 +29,6 @@
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/rtc.h"
#include "esp32c3/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rom/rtc.h"
#include "esp32h4/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rom/rtc.h"
#include "esp32c2/rtc.h"

4
components/esp_hw_support/esp_ds.c
View File

@ -44,10 +44,6 @@
#include "esp32c6/rom/digital_signature.h"
#endif
#if CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rom/digital_signature.h"
#endif
#if CONFIG_IDF_TARGET_ESP32H2
#include "esp32h2/rom/digital_signature.h"
#endif

1
components/esp_hw_support/include/esp_chip_info.h
View File

@ -24,7 +24,6 @@ typedef enum {
CHIP_ESP32S2 = 2, //!< ESP32-S2
CHIP_ESP32S3 = 9, //!< ESP32-S3
CHIP_ESP32C3 = 5, //!< ESP32-C3
CHIP_ESP32H4 = 6, //!< ESP32-H4
CHIP_ESP32C2 = 12, //!< ESP32-C2
CHIP_ESP32C6 = 13, //!< ESP32-C6
CHIP_ESP32H2 = 16, //!< ESP32-H2

2
components/esp_hw_support/include/esp_mac.h
View File

@ -40,8 +40,6 @@ typedef enum {
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C3
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32H4
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32H4_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C2
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C2_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C6

68
components/esp_hw_support/include/soc/esp32h4/esp_crypto_lock.h
View File

@ -1,68 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Acquire lock for HMAC cryptography peripheral
*
* Internally also locks the SHA peripheral, as the HMAC depends on the SHA peripheral
*/
void esp_crypto_hmac_lock_acquire(void);
/**
* @brief Release lock for HMAC cryptography peripheral
*
* Internally also releases the SHA peripheral, as the HMAC depends on the SHA peripheral
*/
void esp_crypto_hmac_lock_release(void);
/**
* @brief Acquire lock for DS cryptography peripheral
*
* Internally also locks the HMAC (which locks SHA), AES and MPI peripheral, as the DS depends on these peripherals
*/
void esp_crypto_ds_lock_acquire(void);
/**
* @brief Release lock for DS cryptography peripheral
*
* Internally also releases the HMAC (which locks SHA), AES and MPI peripheral, as the DS depends on these peripherals
*/
void esp_crypto_ds_lock_release(void);
/**
* @brief Acquire lock for the SHA and AES cryptography peripheral.
*
*/
void esp_crypto_sha_aes_lock_acquire(void);
/**
* @brief Release lock for the SHA and AES cryptography peripheral.
*
*/
void esp_crypto_sha_aes_lock_release(void);
/**
* @brief Acquire lock for the mpi cryptography peripheral.
*
*/
void esp_crypto_mpi_lock_acquire(void);
/**
* @brief Release lock for the mpi/rsa cryptography peripheral.
*
*/
void esp_crypto_mpi_lock_release(void);
#ifdef __cplusplus
}
#endif

32
components/esp_hw_support/include/soc/esp32h4/rtc.h
View File

@ -1,32 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @file esp32h4/rtc.h
*
* This file contains declarations of rtc related functions.
*/
/**
* @brief Get current value of RTC counter in microseconds
*
* Note: this function may take up to 1 RTC_SLOW_CLK cycle to execute
*
* @return current value of RTC counter in microseconds
*/
uint64_t esp_rtc_get_time_us(void);
#ifdef __cplusplus
}
#endif

117
components/esp_hw_support/include/soc/esp32h4/soc_memprot_types.h
View File

@ -1,117 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
//////////////////////////////////////////////////////////
// ESP32-H4 PMS memory protection types
//
#pragma once
#include <stdint.h>
#include <stdbool.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Memory types recognized by PMS
*/
typedef enum {
MEMPROT_TYPE_NONE = 0x00000000,
MEMPROT_TYPE_ALL = 0x7FFFFFFF,
MEMPROT_TYPE_INVALID = 0x80000000
} esp_mprot_mem_t;
/**
* @brief Splitting address (line) type
*/
typedef enum {
MEMPROT_SPLIT_ADDR_NONE = 0x00000000,
MEMPROT_SPLIT_ADDR_ALL = 0x7FFFFFFF,
MEMPROT_SPLIT_ADDR_INVALID = 0x80000000
} esp_mprot_split_addr_t;
/**
* @brief PMS area type (memory space between adjacent splitting addresses or above/below the main splt.address)
*/
typedef enum {
MEMPROT_PMS_AREA_NONE = 0x00000000,
MEMPROT_PMS_AREA_ALL = 0x7FFFFFFF,
MEMPROT_PMS_AREA_INVALID = 0x80000000
} esp_mprot_pms_area_t;
/**
* @brief Memory protection configuration
*/
typedef struct {
bool invoke_panic_handler; /*!< Register PMS violation interrupt for panic-handling */
bool lock_feature; /*!< Lock all PMS settings */
void *split_addr; /*!< Main I/D splitting address */
uint32_t mem_type_mask; /*!< Memory types required to protect. See esp_mprot_mem_t enum */
} esp_memp_config_t;
#define ESP_MEMPROT_DEFAULT_CONFIG() { \
.invoke_panic_handler = true, \
.lock_feature = true, \
.split_addr = NULL, \
.mem_type_mask = MEMPROT_TYPE_ALL \
}
/**
* @brief Converts Memory protection type to string
*
* @param mem_type Memory protection type
*/
static inline const char *esp_mprot_mem_type_to_str(const esp_mprot_mem_t mem_type)
{
switch (mem_type) {
case MEMPROT_TYPE_NONE:
return "MEMPROT_TYPE_NONE";
case MEMPROT_TYPE_ALL:
return "MEMPROT_TYPE_ALL";
default:
return "MEMPROT_TYPE_INVALID";
}
}
/**
* @brief Converts Splitting address type to string
*
* @param line_type Split line type
*/
static inline const char *esp_mprot_split_addr_to_str(const esp_mprot_split_addr_t line_type)
{
switch (line_type) {
case MEMPROT_SPLIT_ADDR_NONE:
return "MEMPROT_SPLIT_ADDR_NONE";
case MEMPROT_SPLIT_ADDR_ALL:
return "MEMPROT_SPLIT_ADDR_ALL";
default:
return "MEMPROT_SPLIT_ADDR_INVALID";
}
}
/**
* @brief Converts PMS Area type to string
*
* @param area_type PMS Area type
*/
static inline const char *esp_mprot_pms_area_to_str(const esp_mprot_pms_area_t area_type)
{
switch (area_type) {
case MEMPROT_PMS_AREA_NONE:
return "MEMPROT_PMS_AREA_NONE";
case MEMPROT_PMS_AREA_ALL:
return "MEMPROT_PMS_AREA_ALL";
default:
return "MEMPROT_PMS_AREA_INVALID";
}
}
#ifdef __cplusplus
}
#endif

23
components/esp_hw_support/port/esp32h4/CMakeLists.txt
View File

@ -1,23 +0,0 @@
set(srcs "rtc_clk_init.c"
"rtc_clk.c"
"rtc_init.c"
"rtc_sleep.c"
"rtc_time.c"
"chip_info.c"
)
if(NOT BOOTLOADER_BUILD)
list(APPEND srcs "esp_crypto_lock.c"
"sar_periph_ctrl.c")
if(CONFIG_ESP_SYSTEM_MEMPROT_FEATURE)
list(APPEND srcs "esp_memprot.c" "../esp_memprot_conv.c")
endif()
endif()
add_prefix(srcs "${CMAKE_CURRENT_LIST_DIR}/" "${srcs}")
target_sources(${COMPONENT_LIB} PRIVATE "${srcs}")
target_include_directories(${COMPONENT_LIB} PUBLIC . private_include)
target_include_directories(${COMPONENT_LIB} PRIVATE ../hal)

41
components/esp_hw_support/port/esp32h4/Kconfig.hw_support
View File

@ -1,41 +0,0 @@
choice ESP32H4_REV_MIN
prompt "Minimum Supported ESP32-H4 Revision"
default ESP32H4_REV_MIN_0
help
Required minimum chip revision. ESP-IDF will check for it and
reject to boot if the chip revision fails the check.
This ensures the chip used will have some modifications (features, or bugfixes).
The complied binary will only support chips above this revision,
this will also help to reduce binary size.
config ESP32H4_REV_MIN_0
bool "Rev v0.0 (ECO0)"
endchoice
config ESP32H4_REV_MIN_FULL
int
default 0 if ESP32H4_REV_MIN_0
config ESP_REV_MIN_FULL
int
default ESP32H4_REV_MIN_FULL
#
# MAX Revision
#
comment "Maximum Supported ESP32-H4 Revision (Rev v1.99)"
# Maximum revision that IDF supports.
# It can not be changed by user.
# Only Espressif can change it when a new version will be supported in IDF.
# Supports all chips starting from ESP32H4_REV_MIN_FULL to ESP32H4_REV_MAX_FULL
config ESP32H4_REV_MAX_FULL
int
default 199
# keep in sync the "Maximum Supported Revision" description with this value
config ESP_REV_MAX_FULL
int
default ESP32H4_REV_MAX_FULL

19
components/esp_hw_support/port/esp32h4/Kconfig.mac
View File

@ -1,19 +0,0 @@
# ESP32H4-TODO: IDF-3390
choice ESP32H4_UNIVERSAL_MAC_ADDRESSES
bool "Number of universally administered (by IEEE) MAC address"
default ESP32H4_UNIVERSAL_MAC_ADDRESSES_TWO
help
Configure the number of universally administered (by IEEE) MAC addresses.
During initialization, MAC addresses for each network interface are generated or derived from a
single base MAC address.
config ESP32H4_UNIVERSAL_MAC_ADDRESSES_TWO
bool "Two"
select ESP_MAC_UNIVERSAL_MAC_ADDRESSES_TWO
select ESP_MAC_ADDR_UNIVERSE_IEEE802154
select ESP_MAC_ADDR_UNIVERSE_BT
endchoice
config ESP32H4_UNIVERSAL_MAC_ADDRESSES
int
default 2 if ESP32H4_UNIVERSAL_MAC_ADDRESSES_TWO

38
components/esp_hw_support/port/esp32h4/Kconfig.rtc
View File

@ -1,38 +0,0 @@
choice RTC_CLK_SRC
prompt "RTC clock source"
default RTC_CLK_SRC_INT_RC
help
Choose which clock is used as RTC clock source.
config RTC_CLK_SRC_INT_RC
bool "Internal 136kHz RC oscillator"
config RTC_CLK_SRC_EXT_CRYS
bool "External 32.768kHz crystal"
select ESP_SYSTEM_RTC_EXT_XTAL
config RTC_CLK_SRC_EXT_OSC
bool "External 32kHz oscillator at 32K_XP pin"
select ESP_SYSTEM_RTC_EXT_OSC
config RTC_CLK_SRC_INT_RC32K
bool "Internal 32kHz RC oscillator"
endchoice
config RTC_CLK_CAL_CYCLES
int "Number of cycles for RTC_SLOW_CLK calibration"
default 3000 if RTC_CLK_SRC_EXT_CRYS || RTC_CLK_SRC_EXT_OSC || RTC_CLK_SRC_INT_RC32K
default 576 if RTC_CLK_SRC_INT_RC
range 0 125000
help
When the startup code initializes RTC_SLOW_CLK, it can perform
calibration by comparing the RTC_SLOW_CLK frequency with main XTAL
frequency. This option sets the number of RTC_SLOW_CLK cycles measured
by the calibration routine. Higher numbers increase calibration
precision, which may be important for applications which spend a lot of
time in deep sleep. Lower numbers reduce startup time.
When this option is set to 0, clock calibration will not be performed at
startup, and approximate clock frequencies will be assumed:
- 150000 Hz if internal RC oscillator is used as clock source. For this use value 1024.
- 32768 Hz if the 32k crystal oscillator is used. For this use value 3000 or more.
In case more value will help improve the definition of the launch of the crystal.
If the crystal could not start, it will be switched to internal RC.

18
components/esp_hw_support/port/esp32h4/chip_info.c
View File

@ -1,18 +0,0 @@
/*
* SPDX-FileCopyrightText: 2013-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <string.h>
#include "esp_chip_info.h"
#include "hal/efuse_hal.h"
void esp_chip_info(esp_chip_info_t *out_info)
{
memset(out_info, 0, sizeof(*out_info));
out_info->model = CHIP_ESP32H4;
out_info->revision = efuse_hal_chip_revision();
out_info->cores = 1;
out_info->features = CHIP_FEATURE_IEEE802154 | CHIP_FEATURE_BLE;
}

62
components/esp_hw_support/port/esp32h4/clk_tree.c
View File

@ -1,62 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "clk_tree.h"
#include "esp_err.h"
#include "esp_check.h"
#include "soc/rtc.h"
#include "hal/clk_tree_hal.h"
#include "hal/clk_tree_ll.h"
#include "esp_private/clk_tree_common.h"
static const char *TAG = "clk_tree";
esp_err_t clk_tree_src_get_freq_hz(soc_module_clk_t clk_src, clk_tree_src_freq_precision_t precision,
uint32_t *freq_value)
{
ESP_RETURN_ON_FALSE(clk_src > 0 && clk_src < SOC_MOD_CLK_INVALID, ESP_ERR_INVALID_ARG, TAG, "unknown clk src");
ESP_RETURN_ON_FALSE(precision < CLK_TREE_SRC_FREQ_PRECISION_INVALID, ESP_ERR_INVALID_ARG, TAG, "unknown precision");
ESP_RETURN_ON_FALSE(freq_value, ESP_ERR_INVALID_ARG, TAG, "null pointer");
uint32_t clk_src_freq = 0;
switch (clk_src) {
case SOC_MOD_CLK_CPU:
clk_src_freq = clk_hal_cpu_get_freq_hz();
break;
case SOC_MOD_CLK_AHB:
clk_src_freq = clk_hal_ahb_get_freq_hz();
break;
case SOC_MOD_CLK_APB:
clk_src_freq = clk_hal_apb_get_freq_hz();
break;
case SOC_MOD_CLK_XTAL:
clk_src_freq = clk_hal_xtal_get_freq_mhz() * MHZ;
break;
case SOC_MOD_CLK_PLL:
clk_src_freq = clk_ll_bbpll_get_freq_mhz() * MHZ;
break;
case SOC_MOD_CLK_RTC_SLOW:
clk_src_freq = clk_tree_lp_slow_get_freq_hz(precision);
break;
case SOC_MOD_CLK_RTC_FAST:
clk_src_freq = clk_tree_lp_fast_get_freq_hz(precision);
break;
case SOC_MOD_CLK_RC_FAST:
clk_src_freq = clk_tree_rc_fast_get_freq_hz(precision);
break;
case SOC_MOD_CLK_XTAL32K:
clk_src_freq = clk_tree_xtal32k_get_freq_hz(precision);
break;
default:
break;
}
ESP_RETURN_ON_FALSE(clk_src_freq, ESP_FAIL, TAG,
"freq shouldn't be 0, calibration failed");
*freq_value = clk_src_freq;
return ESP_OK;
}

107
components/esp_hw_support/port/esp32h4/cpu_region_protect.c
View File

@ -1,107 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "sdkconfig.h"
#include "soc/soc.h"
#include "riscv/csr.h"
void esp_cpu_configure_region_protection(void)
{
/* Notes on implementation:
*
* 1) Note: ESP32-H4 CPU doesn't support overlapping PMP regions
*
* 2) Therefore, we use TOR (top of range) entries to map the whole address
* space, bottom to top.
*
* 3) There are not enough entries to describe all the memory regions 100% accurately.
*
* 4) This means some gaps (invalid memory) are accessible. Priority for extending regions
* to cover gaps is to extend read-only or read-execute regions or read-only regions only
* (executing unmapped addresses should always fault with invalid instruction, read-only means
* stores will correctly fault even if reads may return some invalid value.)
*
* 5) Entries are grouped in order with some static asserts to try and verify everything is
* correct.
*/
const unsigned NONE = PMP_L | PMP_TOR;
const unsigned R = PMP_L | PMP_TOR | PMP_R;
const unsigned RW = PMP_L | PMP_TOR | PMP_R | PMP_W;
const unsigned RX = PMP_L | PMP_TOR | PMP_R | PMP_X;
const unsigned RWX = PMP_L | PMP_TOR | PMP_R | PMP_W | PMP_X;
// 1. Gap at bottom of address space
PMP_ENTRY_SET(0, SOC_DEBUG_LOW, NONE);
// 2. Debug region
PMP_ENTRY_SET(1, SOC_DEBUG_HIGH, RWX);
_Static_assert(SOC_DEBUG_LOW < SOC_DEBUG_HIGH, "Invalid CPU debug region");
// 3. Gap between debug region & DROM (flash cache)
PMP_ENTRY_SET(2, SOC_DROM_LOW, NONE);
_Static_assert(SOC_DEBUG_HIGH < SOC_DROM_LOW, "Invalid PMP entry order");
// 4. DROM (flash cache)
// 5. Gap between DROM & DRAM
// (Note: To save PMP entries these two are merged into one read-only region)
PMP_ENTRY_SET(3, SOC_DRAM_LOW, R);
_Static_assert(SOC_DROM_LOW < SOC_DROM_HIGH, "Invalid DROM region");
_Static_assert(SOC_DROM_HIGH < SOC_DRAM_LOW, "Invalid PMP entry order");
// 6. DRAM
PMP_ENTRY_SET(4, SOC_DRAM_HIGH, RW);
_Static_assert(SOC_DRAM_LOW < SOC_DRAM_HIGH, "Invalid DRAM region");
// 7. Gap between DRAM and Mask DROM
// 8. Mask DROM
// (Note: to save PMP entries these two are merged into one read-only region)
PMP_ENTRY_SET(5, SOC_DROM_MASK_HIGH, R);
_Static_assert(SOC_DRAM_HIGH < SOC_DROM_MASK_LOW, "Invalid PMP entry order");
_Static_assert(SOC_DROM_MASK_LOW < SOC_DROM_MASK_HIGH, "Invalid mask DROM region");
// 9. Gap between mask DROM and mask IROM
// 10. Mask IROM
// (Note: to save PMP entries these two are merged into one RX region)
PMP_ENTRY_SET(6, SOC_IROM_MASK_HIGH, RX);
_Static_assert(SOC_DROM_MASK_HIGH < SOC_IROM_MASK_LOW, "Invalid PMP entry order");
_Static_assert(SOC_IROM_MASK_LOW < SOC_IROM_MASK_HIGH, "Invalid mask IROM region");
// 11. Gap between mask IROM & IRAM
PMP_ENTRY_SET(7, SOC_IRAM_LOW, NONE);
_Static_assert(SOC_IROM_MASK_HIGH < SOC_IRAM_LOW, "Invalid PMP entry order");
// 12. IRAM
PMP_ENTRY_SET(8, SOC_IRAM_HIGH, RWX);
_Static_assert(SOC_IRAM_LOW < SOC_IRAM_HIGH, "Invalid IRAM region");
// 13. Gap between IRAM and IROM
// 14. IROM (flash cache)
// (Note: to save PMP entries these two are merged into one RX region)
PMP_ENTRY_SET(9, SOC_IROM_HIGH, RX);
_Static_assert(SOC_IRAM_HIGH < SOC_IROM_LOW, "Invalid PMP entry order");
_Static_assert(SOC_IROM_LOW < SOC_IROM_HIGH, "Invalid IROM region");
// 15. Gap between IROM & RTC slow memory
PMP_ENTRY_SET(10, SOC_RTC_IRAM_LOW, NONE);
_Static_assert(SOC_IROM_HIGH < SOC_RTC_IRAM_LOW, "Invalid PMP entry order");
// 16. RTC fast memory
PMP_ENTRY_SET(11, SOC_RTC_IRAM_HIGH, RWX);
_Static_assert(SOC_RTC_IRAM_LOW < SOC_RTC_IRAM_HIGH, "Invalid RTC IRAM region");
// 17. Gap between RTC fast memory & peripheral addresses
PMP_ENTRY_SET(12, SOC_PERIPHERAL_LOW, NONE);
_Static_assert(SOC_RTC_IRAM_HIGH < SOC_PERIPHERAL_LOW, "Invalid PMP entry order");
// 18. Peripheral addresses
PMP_ENTRY_SET(13, SOC_PERIPHERAL_HIGH, RW);
_Static_assert(SOC_PERIPHERAL_LOW < SOC_PERIPHERAL_HIGH, "Invalid peripheral region");
// 19. End of address space
PMP_ENTRY_SET(14, UINT32_MAX, NONE); // all but last 4 bytes
PMP_ENTRY_SET(15, UINT32_MAX, PMP_L | PMP_NA4); // last 4 bytes
}

75
components/esp_hw_support/port/esp32h4/esp_crypto_lock.c
View File

@ -1,75 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <sys/lock.h>
#include "esp_crypto_lock.h"
/* Lock overview:
SHA: peripheral independent, but DMA is shared with AES
AES: peripheral independent, but DMA is shared with SHA
MPI/RSA: independent
HMAC: needs SHA
DS: needs HMAC (which needs SHA), AES and MPI
*/
/* Lock for DS peripheral */
static _lock_t s_crypto_ds_lock;
/* Lock for HMAC peripheral */
static _lock_t s_crypto_hmac_lock;
/* Lock for the MPI/RSA peripheral, also used by the DS peripheral */
static _lock_t s_crypto_mpi_lock;
/* Single lock for SHA and AES, sharing a reserved GDMA channel */
static _lock_t s_crypto_sha_aes_lock;
void esp_crypto_hmac_lock_acquire(void)
{
_lock_acquire(&s_crypto_hmac_lock);
esp_crypto_sha_aes_lock_acquire();
}
void esp_crypto_hmac_lock_release(void)
{
esp_crypto_sha_aes_lock_release();
_lock_release(&s_crypto_hmac_lock);
}
void esp_crypto_ds_lock_acquire(void)
{
_lock_acquire(&s_crypto_ds_lock);
esp_crypto_hmac_lock_acquire();
esp_crypto_mpi_lock_acquire();
}
void esp_crypto_ds_lock_release(void)
{
esp_crypto_mpi_lock_release();
esp_crypto_hmac_lock_release();
_lock_release(&s_crypto_ds_lock);
}
void esp_crypto_sha_aes_lock_acquire(void)
{
_lock_acquire(&s_crypto_sha_aes_lock);
}
void esp_crypto_sha_aes_lock_release(void)
{
_lock_release(&s_crypto_sha_aes_lock);
}
void esp_crypto_mpi_lock_acquire(void)
{
_lock_acquire(&s_crypto_mpi_lock);
}
void esp_crypto_mpi_lock_release(void)
{
_lock_release(&s_crypto_mpi_lock);
}

215
components/esp_hw_support/port/esp32h4/esp_memprot.c
View File

@ -1,215 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include "soc/periph_defs.h"
#include "esp_intr_alloc.h"
#include "esp_fault.h"
#include "esp_attr.h"
#include "esp_memprot_err.h"
#include "hal/memprot_types.h"
#include "esp_private/esp_memprot_internal.h"
#include "esp_memprot.h"
esp_err_t esp_mprot_set_split_addr(const esp_mprot_mem_t mem_type, const esp_mprot_split_addr_t line_type, const void *line_addr)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_split_addr(const esp_mprot_mem_t mem_type, const esp_mprot_split_addr_t line_type, void **line_addr)
{
if (line_addr == NULL) {
return ESP_ERR_INVALID_ARG;
}
*line_addr = NULL;
return ESP_OK;
}
esp_err_t esp_mprot_get_default_main_split_addr(const esp_mprot_mem_t mem_type, void **def_split_addr)
{
if (def_split_addr == NULL) {
return ESP_ERR_INVALID_ARG;
}
*def_split_addr = NULL;
return ESP_OK;
}
esp_err_t esp_mprot_set_split_addr_lock(const esp_mprot_mem_t mem_type)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_split_addr_lock(const esp_mprot_mem_t mem_type, bool *locked)
{
if (locked == NULL) {
return ESP_ERR_INVALID_ARG;
}
*locked = false;
return ESP_OK;
}
esp_err_t esp_mprot_set_pms_lock(const esp_mprot_mem_t mem_type)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_pms_lock(const esp_mprot_mem_t mem_type, bool *locked)
{
if (locked == NULL) {
return ESP_ERR_INVALID_ARG;
}
*locked = false;
return ESP_OK;
}
esp_err_t esp_mprot_set_pms_area(const esp_mprot_pms_area_t area_type, const uint32_t flags)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_pms_area(const esp_mprot_pms_area_t area_type, uint32_t *flags)
{
if (flags == NULL) {
return ESP_ERR_INVALID_ARG;
}
*flags = MEMPROT_OP_NONE;
return ESP_OK;
}
esp_err_t esp_mprot_set_monitor_lock(const esp_mprot_mem_t mem_type)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_monitor_lock(const esp_mprot_mem_t mem_type, bool *locked)
{
if (locked == NULL) {
return ESP_ERR_INVALID_ARG;
}
*locked = false;
return ESP_OK;
}
esp_err_t esp_mprot_set_monitor_en(const esp_mprot_mem_t mem_type, const bool enable)
{
return ESP_OK;
}
esp_err_t esp_mprot_get_monitor_en(const esp_mprot_mem_t mem_type, bool *enabled)
{
if (enabled == NULL) {
return ESP_ERR_INVALID_ARG;
}
*enabled = false;
return ESP_OK;
}
esp_err_t esp_mprot_monitor_clear_intr(const esp_mprot_mem_t mem_type, const int core __attribute__((unused)))
{
return ESP_OK;
}
esp_err_t esp_mprot_get_active_intr(esp_memp_intr_source_t *active_memp_intr)
{
if (active_memp_intr == NULL) {
return ESP_ERR_INVALID_ARG;
}
active_memp_intr->mem_type = MEMPROT_TYPE_NONE;
active_memp_intr->core = -1;
return ESP_OK;
}
esp_err_t esp_mprot_is_conf_locked_any(bool *locked)
{
if (locked == NULL) {
return ESP_ERR_INVALID_ARG;
}
*locked = false;
return ESP_OK;
}
esp_err_t esp_mprot_is_intr_ena_any(bool *enabled)
{
if (enabled == NULL) {
return ESP_ERR_INVALID_ARG;
}
*enabled = false;
return ESP_OK;
}
esp_err_t esp_mprot_get_violate_addr(const esp_mprot_mem_t mem_type, void **fault_addr, const int core __attribute__((unused)))
{
if (fault_addr == NULL) {
return ESP_ERR_INVALID_ARG;
}
*fault_addr = NULL;
return ESP_OK;
}
esp_err_t esp_mprot_get_violate_world(const esp_mprot_mem_t mem_type, esp_mprot_pms_world_t *world, const int core __attribute__((unused)))
{
if (world == NULL) {
return ESP_ERR_INVALID_ARG;
}
*world = MEMPROT_PMS_WORLD_NONE;
return ESP_OK;
}
esp_err_t esp_mprot_get_violate_operation(const esp_mprot_mem_t mem_type, uint32_t *oper, const int core __attribute__((unused)))
{
if (oper == NULL) {
return ESP_ERR_INVALID_ARG;
}
*oper = MEMPROT_OP_NONE;
return ESP_OK;
}
bool esp_mprot_has_byte_enables(const esp_mprot_mem_t mem_type)
{
return false;
}
esp_err_t esp_mprot_get_violate_byte_enables(const esp_mprot_mem_t mem_type, uint32_t *byte_en, const int core __attribute__((unused)))
{
if (byte_en == NULL) {
return ESP_ERR_INVALID_ARG;
}
*byte_en = 0;
return ESP_OK;
}
esp_err_t esp_mprot_set_prot(const esp_memp_config_t *memp_config)
{
return ESP_OK;
}

22
components/esp_hw_support/port/esp32h4/i2c_brownout.h
View File

@ -1,22 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
/**
* @file i2c_brownout.h
* @brief Register definitions for brownout detector
*
* This file lists register fields of the brownout detector, located on an internal configuration
* bus. These definitions are used via macros defined in i2c_rtc_clk.h.
*/
#define I2C_BOD 0x61
#define I2C_BOD_HOSTID 1
#define I2C_BOD_THRESHOLD 0x5
#define I2C_BOD_THRESHOLD_MSB 2
#define I2C_BOD_THRESHOLD_LSB 0

13
components/esp_hw_support/port/esp32h4/io_mux.c
View File

@ -1,13 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "esp_private/io_mux.h"
esp_err_t io_mux_set_clock_source(soc_module_clk_t clk_src)
{
// IO MUX clock source is not selectable
return ESP_OK;
}

422
components/esp_hw_support/port/esp32h4/rtc_clk.c
View File

@ -1,422 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include <stdint.h>
#include <stddef.h>
#include <assert.h>
#include <stdlib.h>
#include "sdkconfig.h"
#include "esp32h4/rom/rtc.h"
#include "esp32h4/rom/uart.h"
#include "esp32h4/rom/gpio.h"
#include "soc/rtc.h"
#include "esp_private/rtc_clk.h"
#include "soc/io_mux_reg.h"
#include "hal/clk_tree_ll.h"
#include "hal/regi2c_ctrl_ll.h"
#include "hal/gpio_ll.h"
#include "esp_hw_log.h"
#include "esp_rom_sys.h"
static const char *TAG = "rtc_clk";
#define RTC_OSC_FREQ_RC8M 8
// Current PLL frequency, in 96MHZ. Zero if PLL is not enabled.
static int s_cur_pll_freq;
static uint32_t rtc_clk_ahb_freq_get(void);
static void rtc_clk_cpu_freq_to_xtal(int freq, int div);
void rtc_clk_cpu_freq_to_8m(void);
// Unused as unsupported yet
static uint32_t __attribute((unused)) s_bbpll_digi_consumers_ref_count = 0; // Currently, it only tracks whether the 48MHz PHY clock is in-use by USB Serial/JTAG
void rtc_clk_bbpll_add_consumer(void)
{
s_bbpll_digi_consumers_ref_count += 1;
}
void rtc_clk_bbpll_remove_consumer(void)
{
s_bbpll_digi_consumers_ref_count -= 1;
}
static void rtc_gpio_hangup(uint32_t gpio_no)
{
gpio_ll_pulldown_dis(&GPIO, gpio_no);
gpio_ll_pullup_dis(&GPIO, gpio_no);
gpio_ll_output_disable(&GPIO, gpio_no);
gpio_ll_input_disable(&GPIO, gpio_no);
gpio_ll_iomux_func_sel(GPIO_PIN_MUX_REG[gpio_no], PIN_FUNC_GPIO);
}
void rtc_clk_32k_enable(bool enable)
{
if (enable) {
/* need to hangup 32K_P and 32K_N pins before enable xtal_32k */
rtc_gpio_hangup(XTAL32K_P_GPIO_NUM);
rtc_gpio_hangup(XTAL32K_N_GPIO_NUM);
clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_CRYSTAL);
} else {
clk_ll_xtal32k_disable();
}
}
void rtc_clk_32k_enable_external(void)
{
clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
}
void rtc_clk_32k_bootstrap(uint32_t cycle)
{
/* No special bootstrapping needed for ESP32-H4, 'cycle' argument is to keep the signature
* same as for the ESP32. Just enable the XTAL here.
*/
(void)cycle;
rtc_clk_32k_enable(true);
}
bool rtc_clk_32k_enabled(void)
{
return clk_ll_xtal32k_is_enabled();
}
void rtc_clk_rc32k_enable(bool enable)
{
if (enable) {
clk_ll_rc32k_enable();
} else {
clk_ll_rc32k_disable();
}
}
void rtc_clk_slow_src_set(soc_rtc_slow_clk_src_t clk_src)
{
clk_ll_rtc_slow_set_src(clk_src);
rtc_clk_32k_enable((clk_src == SOC_RTC_SLOW_CLK_SRC_XTAL32K) ? 1 : 0);
rtc_clk_rc32k_enable((clk_src == SOC_RTC_SLOW_CLK_SRC_RC32K) ? 1 : 0);
esp_rom_delay_us(SOC_DELAY_RTC_SLOW_CLK_SWITCH);
}
soc_rtc_slow_clk_src_t rtc_clk_slow_src_get(void)
{
return clk_ll_rtc_slow_get_src();
}
uint32_t rtc_clk_slow_freq_get_hz(void)
{
switch (rtc_clk_slow_src_get()) {
case SOC_RTC_SLOW_CLK_SRC_RC_SLOW: return SOC_CLK_RC_SLOW_FREQ_APPROX;
case SOC_RTC_SLOW_CLK_SRC_XTAL32K: return SOC_CLK_XTAL32K_FREQ_APPROX;
case SOC_RTC_SLOW_CLK_SRC_RC32K: return SOC_CLK_RC32K_FREQ_APPROX;
default: return 0;
}
}
void rtc_clk_fast_src_set(soc_rtc_fast_clk_src_t clk_src)
{
clk_ll_rtc_fast_set_src(clk_src);
esp_rom_delay_us(SOC_DELAY_RTC_FAST_CLK_SWITCH);
}
soc_rtc_fast_clk_src_t rtc_clk_fast_src_get(void)
{
return clk_ll_rtc_fast_get_src();
}
static void rtc_clk_bbpll_disable(void)
{
clk_ll_bbpll_disable();
s_cur_pll_freq = 0;
}
static void rtc_clk_bbpll_enable(void)
{
clk_ll_bbpll_enable();
}
static void rtc_clk_bbpll_configure(rtc_xtal_freq_t xtal_freq, int pll_freq)
{
if (!((pll_freq == CLK_LL_PLL_96M_FREQ_MHZ) && (xtal_freq == RTC_XTAL_FREQ_32M))) {
ESP_HW_LOGE(TAG, "invalid pll or xtal frequency");
}
// No digital part needs to be set, pll_freq can only be 96MHz
// Configure analog part
regi2c_ctrl_ll_bbpll_calibration_start();
clk_ll_bbpll_set_config(pll_freq, xtal_freq);
// Wait until calibration finishes
while (!regi2c_ctrl_ll_bbpll_calibration_is_done());
// Prevent BBPLL clock jitter
regi2c_ctrl_ll_bbpll_calibration_stop();
s_cur_pll_freq = pll_freq;
}
uint32_t rtc_clk_select_root_clk(soc_cpu_clk_src_t cpu_clk_src)
{
uint32_t root_clk_freq_mhz;
switch (cpu_clk_src) {
case SOC_CPU_CLK_SRC_XTAL:
root_clk_freq_mhz = RTC_XTAL_FREQ_32M;
rtc_clk_bbpll_disable();
break;
case SOC_CPU_CLK_SRC_PLL:
// SPLL_ENABLE
root_clk_freq_mhz = CLK_LL_PLL_96M_FREQ_MHZ;
rtc_clk_bbpll_enable();
rtc_clk_bbpll_configure(RTC_XTAL_FREQ_32M, root_clk_freq_mhz);
break;
case SOC_CPU_CLK_SRC_RC_FAST:
root_clk_freq_mhz = RTC_OSC_FREQ_RC8M;
rtc_dig_clk8m_enable(); // TODO: Do we need to enable digital gating here?
rtc_clk_8m_divider_set(1);
rtc_clk_bbpll_disable();
break;
case SOC_CPU_CLK_SRC_XTAL_D2:
root_clk_freq_mhz = RTC_XTAL_FREQ_32M / 2;
rtc_clk_bbpll_disable();
break;
default:
ESP_HW_LOGE(TAG, "unsupported source clk configuration");
// fallback to XTAL as root clock source
root_clk_freq_mhz = RTC_XTAL_FREQ_32M;
rtc_clk_bbpll_disable();
cpu_clk_src = SOC_CPU_CLK_SRC_XTAL;
break;
}
clk_ll_cpu_set_src(cpu_clk_src);
return root_clk_freq_mhz;
}
/**
* Switch to one of PLL-based frequencies. Current frequency can be XTAL or PLL.
* PLL must already be enabled.
* @param cpu_freq new CPU frequency
*/
static void rtc_clk_cpu_freq_to_pll_mhz(int cpu_freq_mhz)
{
int div = 1;
if (CLK_LL_PLL_96M_FREQ_MHZ % cpu_freq_mhz == 0) {
div = CLK_LL_PLL_96M_FREQ_MHZ / cpu_freq_mhz;
} else {
ESP_HW_LOGE(TAG, "invalid frequency");
abort();
}
rtc_clk_cpu_freq_set(SOC_CPU_CLK_SRC_PLL, div);
if (cpu_freq_mhz > RTC_XTAL_FREQ_32M) {
clk_ll_ahb_set_divider(2);
} else {
clk_ll_ahb_set_divider(1);
}
esp_rom_set_cpu_ticks_per_us(cpu_freq_mhz);
rtc_clk_apb_freq_update(rtc_clk_apb_freq_get());
}
bool rtc_clk_cpu_freq_mhz_to_config(uint32_t freq_mhz, rtc_cpu_freq_config_t *out_config)
{
// TODO: This function supposes to only fill a cpu config, but it is writing to registers, needs to check
uint32_t source_freq_mhz;
soc_cpu_clk_src_t source;
uint32_t divider;
uint32_t xtal_freq = (uint32_t)rtc_clk_xtal_freq_get();
if (freq_mhz > xtal_freq) {
source = SOC_CPU_CLK_SRC_PLL;
source_freq_mhz = CLK_LL_PLL_96M_FREQ_MHZ;
divider = CLK_LL_PLL_96M_FREQ_MHZ / freq_mhz;
clk_ll_ahb_set_divider(2);
} else if (freq_mhz != 0) {
source = clk_ll_cpu_get_src();
source_freq_mhz = rtc_clk_select_root_clk(source);
divider = source_freq_mhz / freq_mhz;
clk_ll_ahb_set_divider(1);
} else {
// unsupported frequency
return false;
}
*out_config = (rtc_cpu_freq_config_t) {
.source = source,
.div = divider,
.source_freq_mhz = source_freq_mhz,
.freq_mhz = freq_mhz
};
return true;
}
void rtc_clk_cpu_freq_set_config(const rtc_cpu_freq_config_t *config)
{
uint32_t src_freq_mhz = rtc_clk_select_root_clk(config->source);
uint32_t div = src_freq_mhz / (config->freq_mhz);
rtc_clk_cpu_freq_set(config->source, div);
esp_rom_set_cpu_ticks_per_us(config->freq_mhz);
}
void rtc_clk_cpu_freq_get_config(rtc_cpu_freq_config_t *out_config)
{
soc_cpu_clk_src_t source = clk_ll_cpu_get_src();
uint32_t source_freq_mhz;
uint32_t div;
uint32_t freq_mhz;
switch (source) {
case SOC_CPU_CLK_SRC_XTAL: {
div = clk_ll_cpu_get_divider();
source_freq_mhz = (uint32_t)rtc_clk_xtal_freq_get();
freq_mhz = source_freq_mhz / div;
break;
}
case SOC_CPU_CLK_SRC_PLL: {
div = clk_ll_cpu_get_divider();
source_freq_mhz = CLK_LL_PLL_96M_FREQ_MHZ;
freq_mhz = source_freq_mhz / div;
break;
}
case SOC_CPU_CLK_SRC_RC_FAST: {
source_freq_mhz = RTC_OSC_FREQ_RC8M;
div = clk_ll_cpu_get_divider();
freq_mhz = source_freq_mhz / div;
break;
}
case SOC_CPU_CLK_SRC_XTAL_D2: {
div = clk_ll_cpu_get_divider();
source_freq_mhz = (uint32_t)rtc_clk_xtal_freq_get();
freq_mhz = source_freq_mhz / div / 2;
break;
}
default: {
ESP_HW_LOGE(TAG, "unsupported frequency configuration");
abort();
}
}
*out_config = (rtc_cpu_freq_config_t) {
.source = source,
.source_freq_mhz = source_freq_mhz,
.div = div,
.freq_mhz = freq_mhz
};
}
void rtc_clk_cpu_freq_set_config_fast(const rtc_cpu_freq_config_t *config)
{
if (config->source == SOC_CPU_CLK_SRC_XTAL) {
rtc_clk_cpu_freq_to_xtal(config->freq_mhz, config->div);
} else if (config->source == SOC_CPU_CLK_SRC_PLL &&
s_cur_pll_freq == config->source_freq_mhz) {
rtc_clk_cpu_freq_to_pll_mhz(config->freq_mhz);
} else {
/* fallback */
rtc_clk_cpu_freq_set_config(config);
}
}
void rtc_clk_cpu_freq_set_xtal(void)
{
rtc_clk_cpu_set_to_default_config();
rtc_clk_bbpll_disable();
}
void rtc_clk_cpu_set_to_default_config(void)
{
int freq_mhz = (int)rtc_clk_xtal_freq_get();
rtc_clk_cpu_freq_to_xtal(freq_mhz, 1);
}
/**
* Switch to use XTAL as the CPU clock source.
* Must satisfy: cpu_freq = XTAL_FREQ / div.
* Does not disable the PLL.
*/
static void rtc_clk_cpu_freq_to_xtal(int cpu_freq, int div)
{
esp_rom_set_cpu_ticks_per_us(cpu_freq);
/* Set divider from XTAL to APB clock. Need to set divider to 1 (reg. value 0) first. */
rtc_clk_cpu_freq_set(SOC_CPU_CLK_SRC_XTAL, div);
/* no need to adjust the REF_TICK */
/* switch clock source */
rtc_clk_apb_freq_update(rtc_clk_apb_freq_get());
}
void rtc_clk_cpu_freq_to_8m(void)
{
esp_rom_set_cpu_ticks_per_us(RTC_OSC_FREQ_RC8M);
rtc_clk_select_root_clk(SOC_CPU_CLK_SRC_RC_FAST);
rtc_clk_apb_freq_update(rtc_clk_apb_freq_get());
}
rtc_xtal_freq_t rtc_clk_xtal_freq_get(void)
{
uint32_t xtal_freq_mhz = clk_ll_xtal_load_freq_mhz();
if (xtal_freq_mhz == 0) {
ESP_HW_LOGW(TAG, "invalid RTC_XTAL_FREQ_REG value, assume 32MHz");
return RTC_XTAL_FREQ_32M;
}
return (rtc_xtal_freq_t)xtal_freq_mhz;
}
void rtc_clk_xtal_freq_update(rtc_xtal_freq_t xtal_freq)
{
clk_ll_xtal_store_freq_mhz(xtal_freq);
}
void rtc_clk_apb_freq_update(uint32_t apb_freq)
{
clk_ll_apb_store_freq_hz(apb_freq);
}
uint32_t rtc_clk_apb_freq_get(void)
{
return rtc_clk_ahb_freq_get() / clk_ll_apb_get_divider();
}
static uint32_t rtc_clk_ahb_freq_get(void)
{
rtc_cpu_freq_config_t cpu_config;
rtc_clk_cpu_freq_get_config(&cpu_config);
return cpu_config.freq_mhz * MHZ / clk_ll_ahb_get_divider();
}
void rtc_clk_cpu_freq_set(uint32_t source, uint32_t div)
{
if ((uint32_t)clk_ll_cpu_get_src() != source) {
rtc_clk_select_root_clk(source);
}
clk_ll_cpu_set_divider(div);
}
void rtc_clk_divider_set(uint32_t div)
{
clk_ll_rc_slow_set_divider(div);
}
void rtc_clk_8m_divider_set(uint32_t div)
{
clk_ll_rc_fast_set_divider(div);
}
void rtc_dig_clk8m_enable(void)
{
clk_ll_rc_fast_digi_enable();
esp_rom_delay_us(SOC_DELAY_RC_FAST_DIGI_SWITCH);
}
void rtc_dig_clk8m_disable(void)
{
clk_ll_rc_fast_digi_disable();
esp_rom_delay_us(SOC_DELAY_RC_FAST_DIGI_SWITCH);
}
bool rtc_dig_8m_enabled(void)
{
return clk_ll_rc_fast_digi_is_enabled();
}
/* Name used in libphy.a:phy_chip_v7.o
* TODO: update the library to use rtc_clk_xtal_freq_get
*/
rtc_xtal_freq_t rtc_get_xtal(void) __attribute__((alias("rtc_clk_xtal_freq_get")));

85
components/esp_hw_support/port/esp32h4/rtc_clk_init.c
View File

@ -1,85 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdbool.h>
#include <stdint.h>
#include <stddef.h>
#include <stdlib.h>
#include "sdkconfig.h"
#include "esp32h4/rom/ets_sys.h"
#include "esp32h4/rom/rtc.h"
#include "esp32h4/rom/uart.h"
#include "esp32h4/rom/gpio.h"
#include "soc/rtc.h"
#include "soc/rtc_periph.h"
#include "soc/rtc_cntl_reg.h"
#include "esp_hw_log.h"
#include "esp_cpu.h"
#include "sdkconfig.h"
#include "esp_rom_uart.h"
#include "soc/system_reg.h"
#include "esp_rom_sys.h"
static const char *TAG = "rtc_clk_init";
void rtc_clk_init(rtc_clk_config_t cfg)
{
rtc_cpu_freq_config_t old_config, new_config;
/* Set tuning parameters for 8M and 150k clocks.
* Note: this doesn't attempt to set the clocks to precise frequencies.
* Instead, we calibrate these clocks against XTAL frequency later, when necessary.
* - SCK_DCAP value controls tuning of 150k clock.
* The higher the value of DCAP is, the lower is the frequency.
* - CK8M_DFREQ value controls tuning of 8M clock.
* CLK_8M_DFREQ constant gives the best temperature characteristics.
*/
#if CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2
REG_SET_FIELD(RTC_CNTL_REGULATOR_REG, RTC_CNTL_SCK_DCAP, cfg.slow_clk_dcap);
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_SCK_DCAP, cfg.slow_clk_dcap);
#endif
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DFREQ, cfg.clk_8m_dfreq);
/* enable modem clk */
REG_WRITE(SYSTEM_MODEM_CLK_EN_REG, UINT32_MAX);
/* Configure 150k clock division */
rtc_clk_divider_set(cfg.clk_rtc_clk_div);
/* Configure 8M clock division */
rtc_clk_8m_divider_set(cfg.clk_8m_clk_div);
rtc_xtal_freq_t xtal_freq = cfg.xtal_freq;
esp_rom_uart_tx_wait_idle(0);
rtc_clk_xtal_freq_update(xtal_freq);
rtc_clk_apb_freq_update(rtc_clk_apb_freq_get());
/* Set CPU frequency */
rtc_clk_cpu_freq_get_config(&old_config);
uint32_t freq_before = old_config.freq_mhz;
rtc_clk_select_root_clk(cfg.root_clk_slt);
bool res = rtc_clk_cpu_freq_mhz_to_config(cfg.cpu_freq_mhz, &new_config);
if (!res) {
ESP_HW_LOGE(TAG, "invalid CPU frequency value");
abort();
}
rtc_clk_cpu_freq_set_config(&new_config);
/* Re-calculate the ccount to make time calculation correct. */
esp_cpu_set_cycle_count( (uint64_t)esp_cpu_get_cycle_count() * cfg.cpu_freq_mhz / freq_before );
/* Slow & fast clocks setup */
if (cfg.slow_clk_src == SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
rtc_clk_32k_enable(true);
}
if (cfg.fast_clk_src == SOC_RTC_FAST_CLK_SRC_RC_FAST) {
rtc_dig_clk8m_enable();
}
rtc_clk_fast_src_set(cfg.fast_clk_src);
rtc_clk_slow_src_set(cfg.slow_clk_src);
}

176
components/esp_hw_support/port/esp32h4/rtc_init.c
View File

@ -1,176 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "sdkconfig.h"
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/gpio_reg.h"
#include "soc/spi_mem_reg.h"
#include "soc/extmem_reg.h"
#include "soc/system_reg.h"
#include "soc/syscon_reg.h"
#include "regi2c_ctrl.h"
#include "i2c_pmu.h"
#include "soc/clkrst_reg.h"
#ifndef BOOTLOADER_BUILD
#include "esp_private/sar_periph_ctrl.h"
#endif
void pmu_ctl(void);
void dcdc_ctl(uint32_t mode);
void regulator_slt(regulator_config_t regula_cfg);
void rtc_init(rtc_config_t cfg)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PVTMON_PU);
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_PLL_BUF_WAIT, cfg.pll_wait);
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_CK8M_WAIT, cfg.ck8m_wait);
REG_SET_FIELD(RTC_CNTL_TIMER5_REG, RTC_CNTL_MIN_SLP_VAL, RTC_CNTL_MIN_SLP_VAL_MIN);
// set default powerup & wait time
rtc_init_config_t rtc_init_cfg = RTC_INIT_CONFIG_DEFAULT();
REG_SET_FIELD(RTC_CNTL_TIMER3_REG, RTC_CNTL_WIFI_POWERUP_TIMER, rtc_init_cfg.wifi_powerup_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER3_REG, RTC_CNTL_WIFI_WAIT_TIMER, rtc_init_cfg.wifi_wait_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER3_REG, RTC_CNTL_BT_POWERUP_TIMER, rtc_init_cfg.bt_powerup_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER3_REG, RTC_CNTL_BT_WAIT_TIMER, rtc_init_cfg.bt_wait_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER4_REG, RTC_CNTL_CPU_TOP_POWERUP_TIMER, rtc_init_cfg.cpu_top_powerup_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER4_REG, RTC_CNTL_CPU_TOP_WAIT_TIMER, rtc_init_cfg.cpu_top_wait_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER4_REG, RTC_CNTL_DG_WRAP_POWERUP_TIMER, rtc_init_cfg.dg_wrap_powerup_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER4_REG, RTC_CNTL_DG_WRAP_WAIT_TIMER, rtc_init_cfg.dg_wrap_wait_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER6_REG, RTC_CNTL_DG_PERI_POWERUP_TIMER, rtc_init_cfg.dg_peri_powerup_cycles);
REG_SET_FIELD(RTC_CNTL_TIMER6_REG, RTC_CNTL_DG_PERI_WAIT_TIMER, rtc_init_cfg.dg_peri_wait_cycles);
if (cfg.clkctl_init) {
//clear CMMU clock force on
CLEAR_PERI_REG_MASK(EXTMEM_CACHE_MMU_POWER_CTRL_REG, EXTMEM_CACHE_MMU_MEM_FORCE_ON);
//clear tag clock force on
CLEAR_PERI_REG_MASK(EXTMEM_ICACHE_TAG_POWER_CTRL_REG, EXTMEM_ICACHE_TAG_MEM_FORCE_ON);
//clear register clock force on
CLEAR_PERI_REG_MASK(SPI_MEM_CLOCK_GATE_REG(0), SPI_MEM_CLK_EN);
CLEAR_PERI_REG_MASK(SPI_MEM_CLOCK_GATE_REG(1), SPI_MEM_CLK_EN);
}
if (cfg.pwrctl_init) {
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_FORCE_PU);
//cancel xtal force pu if no need to force power up
//cannot cancel xtal force pu if pll is force power on
if (!(cfg.xtal_fpu | cfg.bbpll_fpu)) {
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_XTL_FORCE_PU);
} else {
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_XTL_FORCE_PU);
}
// force pd APLL
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PU);
SET_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PD);
if (!cfg.bbpll_fpu) {
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BBPLL_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BBPLL_I2C_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BB_I2C_FORCE_PU);
} else {
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BBPLL_FORCE_PU);
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BBPLL_I2C_FORCE_PU);
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BB_I2C_FORCE_PU);
}
#if CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2
CLEAR_PERI_REG_MASK(RTC_CNTL_REGULATOR_REG, RTC_CNTL_REGULATOR_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_REGULATOR_REG, RTC_CNTL_DBOOST_FORCE_PU);
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
CLEAR_PERI_REG_MASK(RTC_CNTL_REG, RTC_CNTL_REGULATOR_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_REG, RTC_CNTL_DBOOST_FORCE_PU);
#endif
// clear i2c_reset_protect pd force, need tested in low temperature.
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG,RTC_CNTL_I2C_RESET_POR_FORCE_PD);
/* If this mask is enabled, all soc memories cannot enter power down mode */
/* We should control soc memory power down mode from RTC, so we will not touch this register any more */
CLEAR_PERI_REG_MASK(SYSTEM_MEM_PD_MASK_REG, SYSTEM_LSLP_MEM_PD_MASK);
/* If this pd_cfg is set to 1, all memory won't enter low power mode during light sleep */
/* If this pd_cfg is set to 0, all memory will enter low power mode during light sleep */
rtc_sleep_pu_config_t pu_cfg = RTC_SLEEP_PU_CONFIG_ALL(0);
rtc_sleep_pu(pu_cfg);
//cancel digital PADS force pu
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_CPU_TOP_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_WIFI_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_FASTMEM_FORCE_LPU); //
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_PERI_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_BT_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_WRAP_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_MEM_FORCE_PU); //
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_LSLP_MEM_FORCE_PU); //
//cancel digital PADS force no iso
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_WRAP_FORCE_NOISO);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_WIFI_FORCE_NOISO);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CPU_TOP_FORCE_NOISO);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PERI_FORCE_NOISO);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_BT_FORCE_NOISO);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_NOISO); //
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_MEM_FORCE_NOISO); //
if (cfg.cpu_waiti_clk_gate) {
CLEAR_PERI_REG_MASK(SYSTEM_CPU_PER_CONF_REG, SYSTEM_CPU_WAIT_MODE_FORCE_ON);
} else {
SET_PERI_REG_MASK(SYSTEM_CPU_PER_CONF_REG, SYSTEM_CPU_WAIT_MODE_FORCE_ON);
}
/*if SYSTEM_CPU_WAIT_MODE_FORCE_ON == 0 , the cpu clk will be closed when cpu enter WAITI mode*/
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_NOISO);
}
REG_WRITE(RTC_CNTL_INT_ENA_REG, 0);
REG_WRITE(RTC_CNTL_INT_CLR_REG, UINT32_MAX);
if (cfg.pmu_ctl) {
/* pmu init*/
pmu_ctl();
}
/* config dcdc frequency */
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL0_REG, RTC_CNTL_FSW_DCDC, RTC_CNTL_DCDC_FREQ_DEFAULT);
#ifndef BOOTLOADER_BUILD
//initialise SAR related peripheral register settings
sar_periph_ctrl_init();
#endif
}
void pmu_ctl(void)
{
pmu_config_t pmu_cfg = PMU_CONFIG_DEFAULT();
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_EN_CONT_CAL, pmu_cfg.or_en_cont_cal);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_ENX_RTC_DREG, pmu_cfg.enx_rtc_dreg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_ENX_DIG_DREG, pmu_cfg.enx_dig_dreg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_EN_I2C_RTC_DREG, pmu_cfg.en_i2c_rtc_dreg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_EN_I2C_DIG_DREG, pmu_cfg.en_i2c_dig_dreg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_EN_I2C_RTC_DREG_SLP, pmu_cfg.en_i2c_rtc_dreg_slp);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_EN_I2C_DIG_DREG_SLP, pmu_cfg.en_i2c_dig_dreg_slp);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_XPD_RTC_SLAVE_3P3, pmu_cfg.or_xpd_rtc_slave_3p3);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_XPD_RTC_REG, pmu_cfg.or_xpd_rtc_reg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_XPD_DIG_REG, pmu_cfg.or_xpd_dig_reg);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_PD_RTC_REG_SLP, pmu_cfg.or_pd_rtc_reg_slp);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_PD_DIG_REG_SLP, pmu_cfg.or_pd_dig_reg_slp);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_XPD_DCDC, pmu_cfg.or_xpd_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_DISALBE_DEEP_SLEEP_DCDC, pmu_cfg.or_disalbe_deep_sleep_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_DISALBE_LIGHT_SLEEP_DCDC, pmu_cfg.or_disalbe_light_sleep_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_ENALBE_TRX_MODE_DCDC, pmu_cfg.or_enalbe_trx_mode_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_ENX_REG_DCDC, pmu_cfg.or_enx_reg_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_UNLOCK_DCDC, pmu_cfg.or_unlock_dcdc);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_FORCE_LOCK_DCDC, pmu_cfg.or_force_lock_dcdc);
// REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_ENB_SLOW_CLK, pmu_cfg.or_enb_slow_clk);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_XPD_TRX, pmu_cfg.or_xpd_trx);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_EN_RESET_CHIP, pmu_cfg.or_en_reset_chip);
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OR_FORCE_XPD_REG_SLAVE, pmu_cfg.or_force_xpd_reg_slave);
}
void dslp_osc_pd(void){
REG_SET_FIELD(RTC_CNTL_RC32K_CTRL_REG,RTC_CNTL_RC32K_XPD, 0);
REG_SET_FIELD(RTC_CNTL_PLL8M_REG, RTC_CNTL_XPD_PLL8M, 0);
}

397
components/esp_hw_support/port/esp32h4/rtc_sleep.c
View File

@ -1,397 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include <stdlib.h>
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/syscon_reg.h"
#include "soc/i2s_reg.h"
#include "soc/bb_reg.h"
#include "soc/nrx_reg.h"
#include "soc/fe_reg.h"
#include "soc/timer_group_reg.h"
#include "soc/system_reg.h"
#include "esp32h4/rom/ets_sys.h"
#include "esp32h4/rom/rtc.h"
#include "regi2c_ctrl.h"
#include "soc/regi2c_bias.h"
#include "soc/regi2c_ulp.h"
#include "i2c_pmu.h"
#include "esp_hw_log.h"
#include "esp_rom_uart.h"
#if CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2
#define RTC_CNTL_DIG_REGULATOR_REG1 RTC_CNTL_DIG_REGULATOR_REG
#define RTC_CNTL_DIG_REGULATOR_REG2 RTC_CNTL_DIG_REGULATOR_REG
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
#define RTC_CNTL_DIG_REGULATOR_REG1 RTC_CNTL_DIGULATOR_REG
#define RTC_CNTL_DIG_REGULATOR_REG2 RTC_CNTL_REG
#define RTC_CNTL_DIG_REGULATOR1_DBIAS_REG RTC_CNTL_DIGULATOR1_DBIAS_REG
#define RTC_CNTL_DIG_REGULATOR0_DBIAS_REG RTC_CNTL_DIGULATOR0_DBIAS_REG
#define RTC_CNTL_REGULATOR1_DBIAS_REG RTC_CNTL_RTCULATOR1_DBIAS_REG
#define RTC_CNTL_REGULATOR0_DBIAS_REG RTC_CNTL_RTCULATOR0_DBIAS_REG
#endif
/**
* Configure whether certain peripherals are powered down in deep sleep
* @param cfg power down flags as rtc_sleep_pu_config_t structure
*/
static const char *TAG = "rtc_sleep";
void rtc_sleep_pu(rtc_sleep_pu_config_t cfg)
{
REG_SET_FIELD(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_LSLP_MEM_FORCE_PU, cfg.dig_fpu);
REG_SET_FIELD(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_FASTMEM_FORCE_LPU, cfg.rtc_fpu);
REG_SET_FIELD(SYSCON_FRONT_END_MEM_PD_REG, SYSCON_DC_MEM_FORCE_PU, cfg.fe_fpu);
REG_SET_FIELD(SYSCON_FRONT_END_MEM_PD_REG, SYSCON_PBUS_MEM_FORCE_PU, cfg.fe_fpu);
REG_SET_FIELD(SYSCON_FRONT_END_MEM_PD_REG, SYSCON_AGC_MEM_FORCE_PU, cfg.fe_fpu);
REG_SET_FIELD(BBPD_CTRL, BB_FFT_FORCE_PU, cfg.bb_fpu);
REG_SET_FIELD(BBPD_CTRL, BB_DC_EST_FORCE_PU, cfg.bb_fpu);
REG_SET_FIELD(NRXPD_CTRL, NRX_RX_ROT_FORCE_PU, cfg.nrx_fpu);
REG_SET_FIELD(NRXPD_CTRL, NRX_VIT_FORCE_PU, cfg.nrx_fpu);
REG_SET_FIELD(NRXPD_CTRL, NRX_DEMAP_FORCE_PU, cfg.nrx_fpu);
REG_SET_FIELD(FE_GEN_CTRL, FE_IQ_EST_FORCE_PU, cfg.fe_fpu);
REG_SET_FIELD(FE2_TX_INTERP_CTRL, FE2_TX_INF_FORCE_PU, cfg.fe_fpu);
if (cfg.sram_fpu) {
REG_SET_FIELD(SYSCON_MEM_POWER_UP_REG, SYSCON_SRAM_POWER_UP, SYSCON_SRAM_POWER_UP);
} else {
REG_SET_FIELD(SYSCON_MEM_POWER_UP_REG, SYSCON_SRAM_POWER_UP, 0);
}
if (cfg.rom_ram_fpu) {
REG_SET_FIELD(SYSCON_MEM_POWER_UP_REG, SYSCON_ROM_POWER_UP, SYSCON_ROM_POWER_UP);
} else {
REG_SET_FIELD(SYSCON_MEM_POWER_UP_REG, SYSCON_ROM_POWER_UP, 0);
}
}
void dcdc_ctl(uint32_t mode)
{
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_IDLE, RTC_CNTL_DCDC_TRX_MODE);
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_MONITOR, RTC_CNTL_DCDC_TRX_MODE);
if ((mode & 0x10) == 0x10) {
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_SLP, mode);
} else if (mode == 0) {
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_SLP, RTC_CNTL_DCDC_TRX_MODE);
} else if (mode == 1) {
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_SLP, RTC_CNTL_DCDC_LSLP_MODE);
} else if (mode == 2) {
REG_SET_FIELD(RTC_CNTL_DCDC_CTRL1_REG, RTC_CNTL_DCDC_MODE_SLP, RTC_CNTL_DCDC_DSLP_MODE);
} else {
ESP_HW_LOGE(TAG, "invalid dcdc mode!\n");
}
}
void regulator_set(regulator_cfg_t cfg)
{
// DIG REGULATOR0
if (cfg.dig_regul0_en) {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_FORCE_PD, 0);
} else {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_FORCE_PD, 1);
}
// DIG REGULATOR1
if (cfg.dig_regul1_en) {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_SLP_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_SLP_FORCE_PD, 0);
} else {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_SLP_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_REGULATOR_SLP_FORCE_PD, 1);
}
// RTC REGULATOR0
if (cfg.rtc_regul0_en) {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PD, 0);
} else {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PU, 0);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PD, 1);
}
}
void regulator_slt(regulator_config_t regula_cfg)
{
// dig regulator
if (regula_cfg.dig_source == 1) {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR1_DBIAS_REG, RTC_CNTL_DIG_REGULATOR1_DBIAS_SLP, regula_cfg.dig_slp_dbias);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR1_DBIAS_REG, RTC_CNTL_DIG_REGULATOR1_DBIAS_ACTIVE, regula_cfg.dig_active_dbias);
} else {
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR0_DBIAS_REG, RTC_CNTL_DIG_REGULATOR0_DBIAS_SLP, regula_cfg.dig_slp_dbias);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR0_DBIAS_REG, RTC_CNTL_DIG_REGULATOR0_DBIAS_ACTIVE, regula_cfg.dig_active_dbias);
}
// rtc regulator
if (regula_cfg.rtc_source == 1) {
REG_SET_FIELD(RTC_CNTL_REGULATOR1_DBIAS_REG, RTC_CNTL_REGULATOR1_DBIAS_SLP, regula_cfg.rtc_slp_dbias);
REG_SET_FIELD(RTC_CNTL_REGULATOR1_DBIAS_REG, RTC_CNTL_REGULATOR1_DBIAS_ACTIVE, regula_cfg.rtc_active_dbias);
} else {
REG_SET_FIELD(RTC_CNTL_REGULATOR0_DBIAS_REG, RTC_CNTL_REGULATOR0_DBIAS_SLP, regula_cfg.rtc_slp_dbias);
REG_SET_FIELD(RTC_CNTL_REGULATOR0_DBIAS_REG, RTC_CNTL_REGULATOR0_DBIAS_ACTIVE, regula_cfg.rtc_active_dbias);
}
}
void dbias_switch_set(dbias_swt_cfg_t cfg)
{
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_DBIAS_SWITCH_IDLE, cfg.swt_idle);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_DBIAS_SWITCH_MONITOR, cfg.swt_monitor);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_DBIAS_SWITCH_SLP, cfg.swt_slp);
}
void left_up_trx_fpu(bool fpu)
{
if (fpu) {
REGI2C_WRITE_MASK(I2C_BIAS, I2C_BIAS_FORCE_DISABLE_BIAS_SLEEP, 0);
REGI2C_WRITE_MASK(I2C_ULP, I2C_ULP_IR_FORCE_XPD_BIAS_BUF, 0);
REGI2C_WRITE_MASK(I2C_ULP, I2C_ULP_IR_FORCE_XPD_IPH, 0);
SET_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_XPD_TRX_FORCE_PU);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_XPD_TRX_FORCE_PU);
}
}
void rtc_sleep_pmu_init(void)
{
dcdc_ctl(DCDC_SLP_DSLP_MODE);
dbias_swt_cfg_t swt_cfg = DBIAS_SWITCH_CONFIG_DEFAULT();
dbias_switch_set(swt_cfg);
regulator_config_t regula0_cfg = REGULATOR0_CONFIG_DEFAULT();
regulator_slt(regula0_cfg);
regulator_config_t regula1_cfg = REGULATOR1_CONFIG_DEFAULT();
regulator_slt(regula1_cfg);
regulator_cfg_t rg_set = REGULATOR_SET_DEFAULT();
regulator_set(rg_set);
left_up_trx_fpu(0);
}
void rtc_sleep_get_default_config(uint32_t sleep_flags, rtc_sleep_config_t *out_config)
{
*out_config = (rtc_sleep_config_t) {
.lslp_mem_inf_fpu = 0,
.rtc_mem_inf_follow_cpu = ((sleep_flags) & RTC_SLEEP_PD_RTC_MEM_FOLLOW_CPU) ? 1 : 0,
.rtc_fastmem_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_FAST_MEM) ? 1 : 0,
.rtc_slowmem_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_SLOW_MEM) ? 1 : 0,
.rtc_peri_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_PERIPH) ? 1 : 0,
.dig_ret_pd_en = ((sleep_flags) & RTC_SLEEP_PD_DIG_RET) ? 1 : 0,
.bt_pd_en = ((sleep_flags) & RTC_SLEEP_PD_BT) ? 1 : 0,
.cpu_pd_en = ((sleep_flags) & RTC_SLEEP_PD_CPU) ? 1 : 0,
.int_8m_pd_en = ((sleep_flags) & RTC_SLEEP_PD_INT_8M) ? 1 : 0,
.dig_peri_pd_en = ((sleep_flags) & RTC_SLEEP_PD_DIG_PERIPH) ? 1 : 0,
.deep_slp = ((sleep_flags) & RTC_SLEEP_PD_DIG) ? 1 : 0,
.wdt_flashboot_mod_en = 0,
.vddsdio_pd_en = ((sleep_flags) & RTC_SLEEP_PD_VDDSDIO) ? 1 : 0,
.xtal_fpu = ((sleep_flags) & RTC_SLEEP_PD_XTAL) ? 0 : 1,
.deep_slp_reject = 1,
.light_slp_reject = 1
};
if ((sleep_flags) & RTC_SLEEP_PD_DIG) {
out_config->dig_dbias_wak = RTC_CNTL_DBIAS_1V10;
out_config->dig_dbias_slp = RTC_CNTL_DBIAS_SLP;
out_config->rtc_dbias_wak = RTC_CNTL_DBIAS_1V10;
out_config->rtc_dbias_slp = RTC_CNTL_DBIAS_SLP;
out_config->bias_sleep_monitor = RTC_CNTL_BIASSLP_MONITOR_DEFAULT;
out_config->bias_sleep_slp = RTC_CNTL_BIASSLP_SLEEP_DEFAULT;
out_config->pd_cur_monitor = RTC_CNTL_PD_CUR_MONITOR_DEFAULT;
out_config->pd_cur_slp = RTC_CNTL_PD_CUR_SLEEP_DEFAULT;
} else {
out_config->dig_dbias_wak = RTC_CNTL_DBIAS_1V10;
out_config->dig_dbias_slp = !((sleep_flags) & RTC_SLEEP_PD_INT_8M) ? RTC_CNTL_DBIAS_1V10 : RTC_CNTL_DBIAS_SLP;
out_config->rtc_dbias_wak = RTC_CNTL_DBIAS_1V10;
out_config->rtc_dbias_slp = !((sleep_flags) & RTC_SLEEP_PD_INT_8M) ? RTC_CNTL_DBIAS_1V10 : RTC_CNTL_DBIAS_SLP;
out_config->bias_sleep_monitor = RTC_CNTL_BIASSLP_MONITOR_DEFAULT;
out_config->bias_sleep_slp = RTC_CNTL_BIASSLP_SLEEP_DEFAULT;
out_config->pd_cur_monitor = RTC_CNTL_PD_CUR_MONITOR_DEFAULT;
out_config->pd_cur_slp = RTC_CNTL_PD_CUR_SLEEP_DEFAULT;
}
}
void rtc_sleep_init(rtc_sleep_config_t cfg)
{
if (cfg.lslp_mem_inf_fpu) {
rtc_sleep_pu_config_t pu_cfg = RTC_SLEEP_PU_CONFIG_ALL(1);
rtc_sleep_pu(pu_cfg);
}
if (cfg.bt_pd_en) {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_BT_PD_EN);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_BT_PD_EN);
}
if (cfg.cpu_pd_en) {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_CPU_TOP_PD_EN);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_CPU_TOP_PD_EN);
}
if (cfg.dig_peri_pd_en) {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_PERI_PD_EN);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_PERI_PD_EN);
}
if (cfg.dig_ret_pd_en) {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_WRAP_RET_PD_EN);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_WRAP_RET_PD_EN);
}
REG_SET_FIELD(RTC_CNTL_BIAS_CONF_REG, RTC_CNTL_BIAS_SLEEP_MONITOR, cfg.bias_sleep_monitor);
REG_SET_FIELD(RTC_CNTL_BIAS_CONF_REG, RTC_CNTL_BIAS_SLEEP_DEEP_SLP, cfg.bias_sleep_slp);
REG_SET_FIELD(RTC_CNTL_BIAS_CONF_REG, RTC_CNTL_PD_CUR_MONITOR, cfg.pd_cur_monitor);
REG_SET_FIELD(RTC_CNTL_BIAS_CONF_REG, RTC_CNTL_PD_CUR_DEEP_SLP, cfg.pd_cur_slp);
// ESP32-H4 TO-DO: IDF-3693
if (cfg.deep_slp) {
// REGI2C_WRITE_MASK(I2C_ULP, I2C_ULP_IR_FORCE_XPD_CK, 0);
// CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PU);
SET_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_WRAP_PD_EN);
CLEAR_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG,
RTC_CNTL_CKGEN_I2C_PU | RTC_CNTL_PLL_I2C_PU |
RTC_CNTL_RFRX_PBUS_PU | RTC_CNTL_TXRF_I2C_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BB_I2C_FORCE_PU);
} else {
SET_PERI_REG_MASK(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_VDD_DRV_B_SLP_EN);
REG_SET_FIELD(RTC_CNTL_DIG_REGULATOR_REG1, RTC_CNTL_DG_VDD_DRV_B_SLP, RTC_CNTL_DG_VDD_DRV_B_SLP_DEFAULT);
// SET_PERI_REG_MASK(RTC_CNTL_DIG_REGULATOR_REG2, RTC_CNTL_REGULATOR_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_DG_WRAP_PD_EN);
}
if (!cfg.int_8m_pd_en) {
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_FORCE_PU);
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_FORCE_NOGATING);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_FORCE_PU);
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_FORCE_NOGATING);
}
/* enable VDDSDIO control by state machine */
REG_CLR_BIT(RTC_CNTL_SDIO_CONF_REG, RTC_CNTL_SDIO_FORCE);
REG_SET_FIELD(RTC_CNTL_SDIO_CONF_REG, RTC_CNTL_SDIO_PD_EN, cfg.vddsdio_pd_en);
REG_SET_FIELD(RTC_CNTL_SLP_REJECT_CONF_REG, RTC_CNTL_DEEP_SLP_REJECT_EN, cfg.deep_slp_reject);
REG_SET_FIELD(RTC_CNTL_SLP_REJECT_CONF_REG, RTC_CNTL_LIGHT_SLP_REJECT_EN, cfg.light_slp_reject);
/* gating XTAL clock */
REG_CLR_BIT(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING);
esp_rom_uart_tx_wait_idle(0);
}
void rtc_sleep_low_init(uint32_t slowclk_period)
{
// set 5 PWC state machine times to fit in main state machine time
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_PLL_BUF_WAIT, RTC_CNTL_PLL_BUF_WAIT_SLP_CYCLES);
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_XTL_BUF_WAIT, rtc_time_us_to_slowclk(RTC_CNTL_XTL_BUF_WAIT_SLP_US, slowclk_period));
REG_SET_FIELD(RTC_CNTL_TIMER1_REG, RTC_CNTL_CK8M_WAIT, RTC_CNTL_CK8M_WAIT_SLP_CYCLES);
}
static uint32_t rtc_sleep_finish(uint32_t lslp_mem_inf_fpu);
uint32_t rtc_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt, uint32_t lslp_mem_inf_fpu)
{
REG_SET_FIELD(RTC_CNTL_WAKEUP_STATE_REG, RTC_CNTL_WAKEUP_ENA, wakeup_opt);
REG_SET_FIELD(RTC_CNTL_SLP_REJECT_CONF_REG, RTC_CNTL_SLEEP_REJECT_ENA, reject_opt);
/* Start entry into sleep mode */
SET_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_SLEEP_EN);
while (GET_PERI_REG_MASK(RTC_CNTL_INT_RAW_REG,
RTC_CNTL_SLP_REJECT_INT_RAW | RTC_CNTL_SLP_WAKEUP_INT_RAW) == 0) {
;
}
return rtc_sleep_finish(lslp_mem_inf_fpu);
}
#define STR2(X) #X
#define STR(X) STR2(X)
uint32_t rtc_deep_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt)
{
REG_SET_FIELD(RTC_CNTL_WAKEUP_STATE_REG, RTC_CNTL_WAKEUP_ENA, wakeup_opt);
WRITE_PERI_REG(RTC_CNTL_SLP_REJECT_CONF_REG, reject_opt);
/* Calculate RTC Fast Memory CRC (for wake stub) & go to deep sleep
Because we may be running from RTC memory as stack, we can't easily call any
functions to do this (as registers will spill to stack, corrupting the CRC).
Instead, load all the values we need into registers then use register ops only to calculate
the CRC value, write it to the RTC CRC value register, and immediately go into deep sleep.
*/
/* Values used to set the SYSTEM_RTC_FASTMEM_CONFIG_REG value */
const unsigned CRC_START_ADDR = 0;
const unsigned CRC_LEN = 0x7ff;
asm volatile(
/* Start CRC calculation */
"sw %1, 0(%0)\n" // set RTC_MEM_CRC_ADDR & RTC_MEM_CRC_LEN
"or t0, %1, %2\n"
"sw t0, 0(%0)\n" // set RTC_MEM_CRC_START
/* Wait for the CRC calculation to finish */
".Lwaitcrc:\n"
"fence\n"
"lw t0, 0(%0)\n"
"li t1, "STR(SYSTEM_RTC_MEM_CRC_FINISH)"\n"
"and t0, t0, t1\n"
"beqz t0, .Lwaitcrc\n"
"not %2, %2\n" // %2 -> ~DPORT_RTC_MEM_CRC_START
"and t0, t0, %2\n"
"sw t0, 0(%0)\n" // clear RTC_MEM_CRC_START
"fence\n"
"not %2, %2\n" // %2 -> DPORT_RTC_MEM_CRC_START, probably unnecessary but gcc assumes inputs unchanged
/* Store the calculated value in RTC_MEM_CRC_REG */
"lw t0, 0(%3)\n"
"sw t0, 0(%4)\n"
"fence\n"
/* Set register bit to go into deep sleep */
"lw t0, 0(%5)\n"
"or t0, t0, %6\n"
"sw t0, 0(%5)\n"
"fence\n"
/* Wait for sleep reject interrupt (never finishes if successful) */
".Lwaitsleep:"
"fence\n"
"lw t0, 0(%7)\n"
"and t0, t0, %8\n"
"beqz t0, .Lwaitsleep\n"
:
:
"r" (SYSTEM_RTC_FASTMEM_CONFIG_REG), // %0
"r" ( (CRC_START_ADDR << SYSTEM_RTC_MEM_CRC_START_S)
| (CRC_LEN << SYSTEM_RTC_MEM_CRC_LEN_S)), // %1
"r" (SYSTEM_RTC_MEM_CRC_START), // %2
"r" (SYSTEM_RTC_FASTMEM_CRC_REG), // %3
"r" (RTC_MEMORY_CRC_REG), // %4
"r" (RTC_CNTL_STATE0_REG), // %5
"r" (RTC_CNTL_SLEEP_EN), // %6
"r" (RTC_CNTL_INT_RAW_REG), // %7
"r" (RTC_CNTL_SLP_REJECT_INT_RAW | RTC_CNTL_SLP_WAKEUP_INT_RAW) // %8
: "t0", "t1" // working registers
);
return rtc_sleep_finish(0);
}
static uint32_t rtc_sleep_finish(uint32_t lslp_mem_inf_fpu)
{
/* In deep sleep mode, we never get here */
uint32_t reject = REG_GET_FIELD(RTC_CNTL_INT_RAW_REG, RTC_CNTL_SLP_REJECT_INT_RAW);
SET_PERI_REG_MASK(RTC_CNTL_INT_CLR_REG,
RTC_CNTL_SLP_REJECT_INT_CLR | RTC_CNTL_SLP_WAKEUP_INT_CLR);
/* restore config if it is a light sleep */
if (lslp_mem_inf_fpu) {
rtc_sleep_pu_config_t pu_cfg = RTC_SLEEP_PU_CONFIG_ALL(1);
rtc_sleep_pu(pu_cfg);
}
return reject;
}

184
components/esp_hw_support/port/esp32h4/rtc_time.c
View File

@ -1,184 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "esp32h4/rom/ets_sys.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "hal/clk_tree_ll.h"
#include "hal/rtc_cntl_ll.h"
#include "soc/timer_group_reg.h"
#include "esp_rom_sys.h"
/* Calibration of RTC_SLOW_CLK is performed using a special feature of TIMG0.
* This feature counts the number of XTAL clock cycles within a given number of
* RTC_SLOW_CLK cycles.
*
* Slow clock calibration feature has two modes of operation: one-off and cycling.
* In cycling mode (which is enabled by default on SoC reset), counting of XTAL
* cycles within RTC_SLOW_CLK cycle is done continuously. Cycling mode is enabled
* using TIMG_RTC_CALI_START_CYCLING bit. In one-off mode counting is performed
* once, and TIMG_RTC_CALI_RDY bit is set when counting is done. One-off mode is
* enabled using TIMG_RTC_CALI_START bit.
*/
/**
* @brief Clock calibration function used by rtc_clk_cal and rtc_clk_cal_ratio
* @param cal_clk which clock to calibrate
* @param slowclk_cycles number of slow clock cycles to count
* @return number of XTAL clock cycles within the given number of slow clock cycles
*/
uint32_t rtc_clk_cal_internal(rtc_cal_sel_t cal_clk, uint32_t slowclk_cycles)
{
/* On ESP32H4, choosing RTC_CAL_RTC_MUX results in calibration of
* the 150k RTC clock regardless of the currenlty selected SLOW_CLK.
* On the ESP32, it used the currently selected SLOW_CLK.
* The following code emulates ESP32 behavior:
*/
if (cal_clk == RTC_CAL_RTC_MUX) {
soc_rtc_slow_clk_src_t slow_clk_src = rtc_clk_slow_src_get();
if (slow_clk_src == SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
cal_clk = RTC_CAL_32K_XTAL;
} else if (slow_clk_src == SOC_RTC_SLOW_CLK_SRC_RC32K) {
cal_clk = RTC_CAL_RC32K;
}
}
/* Enable requested clock (150k clock is always on) */
bool dig_32k_xtal_enabled = clk_ll_xtal32k_digi_is_enabled();
if (cal_clk == RTC_CAL_32K_XTAL && !dig_32k_xtal_enabled) {
clk_ll_xtal32k_digi_enable();
}
bool dig_rc32k_enabled = clk_ll_rc32k_digi_is_enabled();
if (cal_clk == RTC_CAL_RC32K && !dig_rc32k_enabled) {
clk_ll_rc32k_digi_enable();
}
/* There may be another calibration process already running during we call this function,
* so we should wait the last process is done.
*/
if (GET_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_START_CYCLING)) {
/**
* Set a small timeout threshold to accelerate the generation of timeout.
* The internal circuit will be reset when the timeout occurs and will not affect the next calibration.
*/
REG_SET_FIELD(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT_THRES, 1);
while (!GET_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_RDY)
&& !GET_PERI_REG_MASK(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT));
}
/* Prepare calibration */
REG_SET_FIELD(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_CLK_SEL, cal_clk);
CLEAR_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_START_CYCLING);
REG_SET_FIELD(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_MAX, slowclk_cycles);
/* Figure out how long to wait for calibration to finish */
/* Set timeout reg and expect time delay*/
uint32_t expected_freq;
if (cal_clk == RTC_CAL_32K_XTAL) {
REG_SET_FIELD(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT_THRES, RTC_SLOW_CLK_X32K_CAL_TIMEOUT_THRES(slowclk_cycles));
expected_freq = SOC_CLK_XTAL32K_FREQ_APPROX;
} else if (cal_clk == RTC_CAL_RC32K) {
REG_SET_FIELD(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT_THRES, RTC_SLOW_CLK_RC32K_CAL_TIMEOUT_THRES(slowclk_cycles));
expected_freq = SOC_CLK_RC32K_FREQ_APPROX;
} else {
REG_SET_FIELD(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT_THRES, RTC_SLOW_CLK_150K_CAL_TIMEOUT_THRES(slowclk_cycles));
expected_freq = SOC_CLK_RC_SLOW_FREQ_APPROX;
}
uint32_t us_time_estimate = (uint32_t) (((uint64_t) slowclk_cycles) * MHZ / expected_freq);
/* Start calibration */
CLEAR_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_START);
SET_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_START);
/* Wait for calibration to finish up to another us_time_estimate */
esp_rom_delay_us(us_time_estimate * 3);
uint32_t cal_val;
while (true) {
if (GET_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_RDY)) {
cal_val = REG_GET_FIELD(TIMG_RTCCALICFG1_REG(0), TIMG_RTC_CALI_VALUE);
break;
}
if (GET_PERI_REG_MASK(TIMG_RTCCALICFG2_REG(0), TIMG_RTC_CALI_TIMEOUT)) {
cal_val = 0;
break;
}
}
CLEAR_PERI_REG_MASK(TIMG_RTCCALICFG_REG(0), TIMG_RTC_CALI_START);
/* if dig_32k_xtal was originally off and enabled due to calibration, then set back to off state */
if (cal_clk == RTC_CAL_32K_XTAL && !dig_32k_xtal_enabled) {
clk_ll_xtal32k_digi_disable();
}
/* if dig_rc32k was originally off and enabled due to calibration, then set back to off state */
if (cal_clk == RTC_CAL_RC32K && !dig_rc32k_enabled) {
clk_ll_rc32k_digi_disable();
}
return cal_val;
}
uint32_t rtc_clk_cal_ratio(rtc_cal_sel_t cal_clk, uint32_t slowclk_cycles)
{
uint64_t xtal_cycles = rtc_clk_cal_internal(cal_clk, slowclk_cycles);
uint64_t ratio_64 = ((xtal_cycles << RTC_CLK_CAL_FRACT)) / slowclk_cycles;
uint32_t ratio = (uint32_t)(ratio_64 & UINT32_MAX);
return ratio;
}
static inline bool rtc_clk_cal_32k_valid(rtc_xtal_freq_t xtal_freq, uint32_t slowclk_cycles, uint64_t actual_xtal_cycles)
{
uint64_t expected_xtal_cycles = (xtal_freq * 1000000ULL * slowclk_cycles) >> 15; // xtal_freq(hz) * slowclk_cycles / 32768
uint64_t delta = expected_xtal_cycles / 2000; // 5/10000
return (actual_xtal_cycles >= (expected_xtal_cycles - delta)) && (actual_xtal_cycles <= (expected_xtal_cycles + delta));
}
uint32_t rtc_clk_cal(rtc_cal_sel_t cal_clk, uint32_t slowclk_cycles)
{
rtc_xtal_freq_t xtal_freq = rtc_clk_xtal_freq_get();
uint64_t xtal_cycles = rtc_clk_cal_internal(cal_clk, slowclk_cycles);
if ((cal_clk == RTC_CAL_32K_XTAL) && !rtc_clk_cal_32k_valid(xtal_freq, slowclk_cycles, xtal_cycles)) {
return 0;
}
uint64_t divider = ((uint64_t)xtal_freq) * slowclk_cycles;
uint64_t period_64 = ((xtal_cycles << RTC_CLK_CAL_FRACT) + divider / 2 - 1) / divider;
uint32_t period = (uint32_t)(period_64 & UINT32_MAX);
return period;
}
uint64_t rtc_time_us_to_slowclk(uint64_t time_in_us, uint32_t period)
{
/* Overflow will happen in this function if time_in_us >= 2^45, which is about 400 days.
* TODO: fix overflow.
*/
return (time_in_us << RTC_CLK_CAL_FRACT) / period;
}
uint64_t rtc_time_slowclk_to_us(uint64_t rtc_cycles, uint32_t period)
{
return (rtc_cycles * period) >> RTC_CLK_CAL_FRACT;
}
uint64_t rtc_time_get(void)
{
return rtc_cntl_ll_get_rtc_time();
}
void rtc_clk_wait_for_slow_cycle(void) //This function may not by useful any more
{
SET_PERI_REG_MASK(RTC_CNTL_SLOW_CLK_CONF_REG, RTC_CNTL_SLOW_CLK_NEXT_EDGE);
while (GET_PERI_REG_MASK(RTC_CNTL_SLOW_CLK_CONF_REG, RTC_CNTL_SLOW_CLK_NEXT_EDGE)) {
esp_rom_delay_us(1);
}
}
uint32_t rtc_clk_freq_cal(uint32_t cal_val)
{
if (cal_val == 0) {
return 0; // cal_val will be denominator, return 0 as the symbol of failure.
}
return 1000000ULL * (1 << RTC_CLK_CAL_FRACT) / cal_val;
}

110
components/esp_hw_support/port/esp32h4/sar_periph_ctrl.c
View File

@ -1,110 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* SAR related peripherals are interdependent. This file
* provides a united control to these registers, as multiple
* components require these controls.
*
* Related peripherals are:
* - ADC
* - PWDET
*/
#include "sdkconfig.h"
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "esp_private/sar_periph_ctrl.h"
#include "hal/sar_ctrl_ll.h"
static const char *TAG = "sar_periph_ctrl";
extern portMUX_TYPE rtc_spinlock;
void sar_periph_ctrl_init(void)
{
//TODO: IDF-6123
}
void sar_periph_ctrl_power_enable(void)
{
//TODO: IDF-6123
}
void sar_periph_ctrl_power_disable(void)
{
//TODO: IDF-6123
}
/**
* This gets incremented when s_sar_power_acquire() is called,
* and decremented when s_sar_power_release() is called.
* PWDET is powered down when the value reaches zero.
* Should be modified within critical section.
*/
static int s_pwdet_power_on_cnt;
static void s_sar_power_acquire(void)
{
portENTER_CRITICAL_SAFE(&rtc_spinlock);
s_pwdet_power_on_cnt++;
if (s_pwdet_power_on_cnt == 1) {
sar_ctrl_ll_set_power_mode_from_pwdet(SAR_CTRL_LL_POWER_ON);
}
portEXIT_CRITICAL_SAFE(&rtc_spinlock);
}
static void s_sar_power_release(void)
{
portENTER_CRITICAL_SAFE(&rtc_spinlock);
s_pwdet_power_on_cnt--;
if (s_pwdet_power_on_cnt < 0) {
portEXIT_CRITICAL(&rtc_spinlock);
ESP_LOGE(TAG, "%s called, but s_pwdet_power_on_cnt == 0", __func__);
abort();
} else if (s_pwdet_power_on_cnt == 0) {
sar_ctrl_ll_set_power_mode_from_pwdet(SAR_CTRL_LL_POWER_FSM);
}
portEXIT_CRITICAL_SAFE(&rtc_spinlock);
}
/*------------------------------------------------------------------------------
* PWDET Power
*----------------------------------------------------------------------------*/
void sar_periph_ctrl_pwdet_power_acquire(void)
{
s_sar_power_acquire();
}
void sar_periph_ctrl_pwdet_power_release(void)
{
s_sar_power_release();
}
/*------------------------------------------------------------------------------
* ADC Power
*----------------------------------------------------------------------------*/
void sar_periph_ctrl_adc_oneshot_power_acquire(void)
{
s_sar_power_acquire();
}
void sar_periph_ctrl_adc_oneshot_power_release(void)
{
s_sar_power_release();
}
void sar_periph_ctrl_adc_continuous_power_acquire(void)
{
s_sar_power_acquire();
}
void sar_periph_ctrl_adc_continuous_power_release(void)
{
s_sar_power_release();
}

22
components/esp_hw_support/port/esp32h4/systimer.c
View File

@ -1,22 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "esp_private/systimer.h"
/**
* @brief systimer's clock source is fixed to XTAL (32MHz), and has a fixed fractional divider (2.0).
* So the resolution of the systimer is 32MHz/2.0 = 16MHz.
*/
uint64_t systimer_ticks_to_us(uint64_t ticks)
{
return ticks / 16;
}
uint64_t systimer_us_to_ticks(uint64_t us)
{
return us * 16;
}

5
components/esp_hw_support/sleep_modes.c
View File

@ -76,8 +76,6 @@
#include "esp_private/mspi_timing_tuning.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C6
@ -115,9 +113,6 @@
#elif CONFIG_IDF_TARGET_ESP32C3
#define DEFAULT_SLEEP_OUT_OVERHEAD_US (105)
#define DEFAULT_HARDWARE_OUT_OVERHEAD_US (37)
#elif CONFIG_IDF_TARGET_ESP32H4
#define DEFAULT_SLEEP_OUT_OVERHEAD_US (105)
#define DEFAULT_HARDWARE_OUT_OVERHEAD_US (37)
#elif CONFIG_IDF_TARGET_ESP32C2
#define DEFAULT_SLEEP_OUT_OVERHEAD_US (118)
#define DEFAULT_HARDWARE_OUT_OVERHEAD_US (9)

2
components/esp_hw_support/sleep_wake_stub.c
View File

@ -41,8 +41,6 @@
#include "esp32s3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C6
#include "esp32c6/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32H2

3
components/esp_hw_support/test_apps/rtc_clk/main/test_rtc_clk.c
View File

@ -40,9 +40,6 @@
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rtc.h"
#include "esp32c3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rtc.h"
#include "esp32h4/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rtc.h"
#include "esp32c2/rom/rtc.h"

25
components/esp_mm/port/esp32h4/ext_mem_layout.c
View File

@ -1,25 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdlib.h>
#include <stdint.h>
#include "sdkconfig.h"
#include "soc/ext_mem_defs.h"
#include "../ext_mem_layout.h"
/**
* The start addresses in this list should always be sorted from low to high, as MMU driver will need to
* coalesce adjacent regions
*/
const mmu_mem_region_t g_mmu_mem_regions[SOC_MMU_LINEAR_ADDRESS_REGION_NUM] = {
[0] = {
.start = SOC_MMU_IRAM0_LINEAR_ADDRESS_LOW,
.end = SOC_MMU_IRAM0_LINEAR_ADDRESS_HIGH,
.size = BUS_SIZE(SOC_MMU_IRAM0_LINEAR),
.bus_id = CACHE_BUS_IBUS0 | CACHE_BUS_DBUS0,
.targets = MMU_TARGET_FLASH0,
.caps = MMU_MEM_CAP_EXEC | MMU_MEM_CAP_READ | MMU_MEM_CAP_32BIT | MMU_MEM_CAP_8BIT,
},
};

15
components/hal/CMakeLists.txt
View File

@ -25,14 +25,6 @@ if(NOT ${target} STREQUAL "esp32" AND NOT CONFIG_APP_BUILD_TYPE_PURE_RAM_APP)
list(APPEND srcs "cache_hal.c")
endif()
if(${target} STREQUAL "esp32h4")
if(CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1)
list(APPEND includes "${target}/include/rev1")
elseif(CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2)
list(APPEND includes "${target}/include/rev2")
endif()
endif()
if(NOT BOOTLOADER_BUILD)
list(APPEND srcs
"rtc_io_hal.c"
@ -221,13 +213,6 @@ if(NOT BOOTLOADER_BUILD)
"esp32c3/rtc_cntl_hal.c")
endif()
if(${target} STREQUAL "esp32h4")
list(APPEND srcs
"spi_flash_hal_gpspi.c"
"aes_hal.c"
"esp32h4/rtc_cntl_hal.c")
endif()
if(${target} STREQUAL "esp32c2")
list(APPEND srcs
"spi_flash_hal_gpspi.c"

73
components/hal/esp32h4/clk_tree_hal.c
View File

@ -1,73 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "hal/clk_tree_hal.h"
#include "hal/clk_tree_ll.h"
#include "soc/rtc.h"
#include "hal/assert.h"
#include "hal/log.h"
static const char *CLK_HAL_TAG = "clk_hal";
uint32_t clk_hal_soc_root_get_freq_mhz(soc_cpu_clk_src_t cpu_clk_src)
{
switch (cpu_clk_src) {
case SOC_CPU_CLK_SRC_XTAL:
return clk_hal_xtal_get_freq_mhz();
case SOC_CPU_CLK_SRC_PLL:
return clk_ll_bbpll_get_freq_mhz();
case SOC_CPU_CLK_SRC_RC_FAST:
return SOC_CLK_RC_FAST_FREQ_APPROX / MHZ;
case SOC_CPU_CLK_SRC_XTAL_D2:
return clk_hal_xtal_get_freq_mhz() >> 1;
default:
// Unknown CPU_CLK mux input
HAL_ASSERT(false);
return 0;
}
}
uint32_t clk_hal_cpu_get_freq_hz(void)
{
soc_cpu_clk_src_t source = clk_ll_cpu_get_src();
return clk_hal_soc_root_get_freq_mhz(source) * MHZ / clk_ll_cpu_get_divider();
}
uint32_t clk_hal_ahb_get_freq_hz(void)
{
return clk_hal_cpu_get_freq_hz() / clk_ll_ahb_get_divider();
}
uint32_t clk_hal_apb_get_freq_hz(void)
{
return clk_hal_ahb_get_freq_hz() / clk_ll_apb_get_divider();
}
uint32_t clk_hal_lp_slow_get_freq_hz(void)
{
switch (clk_ll_rtc_slow_get_src()) {
case SOC_RTC_SLOW_CLK_SRC_RC_SLOW:
return SOC_CLK_RC_SLOW_FREQ_APPROX;
case SOC_RTC_SLOW_CLK_SRC_XTAL32K:
return SOC_CLK_XTAL32K_FREQ_APPROX;
case SOC_RTC_SLOW_CLK_SRC_RC32K:
return SOC_CLK_RC32K_FREQ_APPROX;
default:
// Unknown RTC_SLOW_CLK mux input
HAL_ASSERT(false);
return 0;
}
}
uint32_t clk_hal_xtal_get_freq_mhz(void)
{
uint32_t freq = clk_ll_xtal_load_freq_mhz();
if (freq == 0) {
HAL_LOGW(CLK_HAL_TAG, "invalid RTC_XTAL_FREQ_REG value, assume 32MHz");
return (uint32_t)RTC_XTAL_FREQ_32M;
}
return freq;
}

88
components/hal/esp32h4/efuse_hal.c
View File

@ -1,88 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <sys/param.h>
#include "soc/soc_caps.h"
#include "hal/assert.h"
#include "hal/efuse_hal.h"
#include "hal/efuse_ll.h"
#include "esp_attr.h"
#define ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block) ((error_reg) & (0x0F << (4 * (block))))
IRAM_ATTR uint32_t efuse_hal_get_major_chip_version(void)
{
return efuse_ll_get_chip_wafer_version_major();
}
IRAM_ATTR uint32_t efuse_hal_get_minor_chip_version(void)
{
return efuse_ll_get_chip_wafer_version_minor();
}
/******************* eFuse control functions *************************/
void efuse_hal_set_timing(uint32_t apb_freq_hz)
{
(void) apb_freq_hz;
efuse_ll_set_pwr_off_num(0x190);
}
void efuse_hal_read(void)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_read_op_code();
efuse_ll_set_read_cmd();
while (efuse_ll_get_read_cmd() != 0) { }
/*Due to a hardware error, we have to read READ_CMD again to make sure the efuse clock is normal*/
while (efuse_ll_get_read_cmd() != 0) { }
}
void efuse_hal_clear_program_registers(void)
{
ets_efuse_clear_program_registers();
}
void efuse_hal_program(uint32_t block)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_write_op_code();
efuse_ll_set_pgm_cmd(block);
while (efuse_ll_get_pgm_cmd() != 0) { }
efuse_hal_clear_program_registers();
efuse_hal_read();
}
void efuse_hal_rs_calculate(const void *data, void *rs_values)
{
ets_efuse_rs_calculate(data, rs_values);
}
/******************* eFuse control functions *************************/
bool efuse_hal_is_coding_error_in_block(unsigned block)
{
if (block == 0) {
for (unsigned i = 0; i < 5; i++) {
if (REG_READ(EFUSE_RD_REPEAT_ERR0_REG + i * 4)) {
return true;
}
}
} else if (block <= 10) {
// EFUSE_RD_RS_ERR0_REG: (hi) BLOCK8, BLOCK7, BLOCK6, BLOCK5, BLOCK4, BLOCK3, BLOCK2, BLOCK1 (low)
// EFUSE_RD_RS_ERR1_REG: BLOCK10, BLOCK9
block--;
uint32_t error_reg = REG_READ(EFUSE_RD_RS_ERR0_REG + (block / 8) * 4);
return ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block % 8) != 0;
}
return false;
}

862
components/hal/esp32h4/include/hal/adc_ll.h
View File

@ -1,862 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include <stdlib.h>
#include "esp_attr.h"
#include "soc/adc_periph.h"
#include "hal/adc_types.h"
#include "hal/adc_types_private.h"
#include "soc/apb_saradc_struct.h"
#include "soc/apb_saradc_reg.h"
#include "soc/rtc_cntl_struct.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/clk_tree_defs.h"
#include "hal/misc.h"
#include "hal/assert.h"
#include "hal/regi2c_ctrl.h"
#include "soc/regi2c_saradc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define ADC_LL_EVENT_ADC1_ONESHOT_DONE BIT(31)
#define ADC_LL_EVENT_ADC2_ONESHOT_DONE BIT(30)
/*---------------------------------------------------------------
Oneshot
---------------------------------------------------------------*/
#define ADC_LL_DATA_INVERT_DEFAULT(PERIPH_NUM) (0)
#define ADC_LL_SAR_CLK_DIV_DEFAULT(PERIPH_NUM) ((PERIPH_NUM==0)? 2 : 1)
/*---------------------------------------------------------------
DMA
---------------------------------------------------------------*/
#define ADC_LL_DIGI_DATA_INVERT_DEFAULT(PERIPH_NUM) (0)
#define ADC_LL_FSM_RSTB_WAIT_DEFAULT (8)
#define ADC_LL_FSM_START_WAIT_DEFAULT (5)
#define ADC_LL_FSM_STANDBY_WAIT_DEFAULT (100)
#define ADC_LL_SAMPLE_CYCLE_DEFAULT (2)
#define ADC_LL_DIGI_SAR_CLK_DIV_DEFAULT (1)
#define ADC_LL_CLKM_DIV_NUM_DEFAULT 15
#define ADC_LL_CLKM_DIV_B_DEFAULT 1
#define ADC_LL_CLKM_DIV_A_DEFAULT 0
#define ADC_LL_DEFAULT_CONV_LIMIT_EN 0
#define ADC_LL_DEFAULT_CONV_LIMIT_NUM 10
/*---------------------------------------------------------------
PWDET (Power Detect)
---------------------------------------------------------------*/
#define ADC_LL_PWDET_CCT_DEFAULT (4)
typedef enum {
ADC_LL_POWER_BY_FSM, /*!< ADC XPD controlled by FSM. Used for polling mode */
ADC_LL_POWER_SW_ON, /*!< ADC XPD controlled by SW. power on. Used for DMA mode */
ADC_LL_POWER_SW_OFF, /*!< ADC XPD controlled by SW. power off. */
} adc_ll_power_t;
typedef enum {
ADC_LL_RTC_DATA_OK = 0,
ADC_LL_RTC_CTRL_UNSELECTED = 1,
ADC_LL_RTC_CTRL_BREAK = 2,
ADC_LL_RTC_DATA_FAIL = -1,
} adc_ll_rtc_raw_data_t;
typedef enum {
ADC_LL_CTRL_DIG = 0, ///< For ADC1. Select DIG controller.
ADC_LL_CTRL_ARB = 1, ///< For ADC2. The controller is selected by the arbiter.
} adc_ll_controller_t;
/**
* @brief ADC digital controller (DMA mode) work mode.
*
* @note The conversion mode affects the sampling frequency:
* ESP32H4 only support ONLY_ADC1 mode
* SINGLE_UNIT_1: When the measurement is triggered, only ADC1 is sampled once.
*/
typedef enum {
ADC_LL_DIGI_CONV_ONLY_ADC1 = 0, // Only use ADC1 for conversion
} adc_ll_digi_convert_mode_t;
//These values should be set according to the HW
typedef enum {
ADC_LL_INTR_THRES1_LOW = BIT(26),
ADC_LL_INTR_THRES0_LOW = BIT(27),
ADC_LL_INTR_THRES1_HIGH = BIT(28),
ADC_LL_INTR_THRES0_HIGH = BIT(29),
ADC_LL_INTR_ADC2_DONE = BIT(30),
ADC_LL_INTR_ADC1_DONE = BIT(31),
} adc_ll_intr_t;
FLAG_ATTR(adc_ll_intr_t)
typedef struct {
union {
struct {
uint8_t atten: 2;
uint8_t channel: 3;
uint8_t unit: 1;
uint8_t reserved: 2;
};
uint8_t val;
};
} __attribute__((packed)) adc_ll_digi_pattern_table_t;
/*---------------------------------------------------------------
Digital controller setting
---------------------------------------------------------------*/
/**
* Set adc fsm interval parameter for digital controller. These values are fixed for same platforms.
*
* @param rst_wait cycles between DIG ADC controller reset ADC sensor and start ADC sensor.
* @param start_wait Delay time after open xpd.
* @param standby_wait Delay time to close xpd.
*/
static inline void adc_ll_digi_set_fsm_time(uint32_t rst_wait, uint32_t start_wait, uint32_t standby_wait)
{
// Internal FSM reset wait time
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.fsm_wait, rstb_wait, rst_wait);
// Internal FSM start wait time
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.fsm_wait, xpd_wait, start_wait);
// Internal FSM standby wait time
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.fsm_wait, standby_wait, standby_wait);
}
/**
* Set adc sample cycle for digital controller.
*
* @note Normally, please use default value.
* @param sample_cycle Cycles between DIG ADC controller start ADC sensor and beginning to receive data from sensor.
* Range: 2 ~ 0xFF.
*/
static inline void adc_ll_set_sample_cycle(uint32_t sample_cycle)
{
/* Should be called before writing I2C registers. */
SET_PERI_REG_MASK(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_SAR_I2C_PU);
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_SAMPLE_CYCLE_ADDR, sample_cycle);
}
/**
* Set SAR ADC module clock division factor.
* SAR ADC clock divided from digital controller clock.
*
* @param div Division factor.
*/
static inline void adc_ll_digi_set_clk_div(uint32_t div)
{
/* ADC clock divided from digital controller clock clk */
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.ctrl, sar_clk_div, div);
}
/**
* Set adc max conversion number for digital controller.
* If the number of ADC conversion is equal to the maximum, the conversion is stopped.
*
* @param meas_num Max conversion number. Range: 0 ~ 255.
*/
static inline void adc_ll_digi_set_convert_limit_num(uint32_t meas_num)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.ctrl2, max_meas_num, meas_num);
}
/**
* Enable max conversion number detection for digital controller.
* If the number of ADC conversion is equal to the maximum, the conversion is stopped.
*
* @param enable true: enable; false: disable
*/
static inline void adc_ll_digi_convert_limit_enable(bool enable)
{
APB_SARADC.ctrl2.meas_num_limit = enable;
}
/**
* Set adc conversion mode for digital controller.
*
* @note ESP32H4 only support ADC1 single mode.
*
* @param mode Conversion mode select.
*/
static inline void adc_ll_digi_set_convert_mode(adc_ll_digi_convert_mode_t mode)
{
//ESP32H4 only supports ADC_LL_DIGI_CONV_ONLY_ADC1 mode
}
/**
* Set pattern table length for digital controller.
* The pattern table that defines the conversion rules for each SAR ADC. Each table has 8 items, in which channel selection,
* and attenuation are stored. When the conversion is started, the controller reads conversion rules from the
* pattern table one by one. For each controller the scan sequence has at most 8 different rules before repeating itself.
*
* @param adc_n ADC unit.
* @param patt_len Items range: 1 ~ 8.
*/
static inline void adc_ll_digi_set_pattern_table_len(adc_unit_t adc_n, uint32_t patt_len)
{
APB_SARADC.ctrl.sar_patt_len = patt_len - 1;
}
/**
* Set pattern table for digital controller.
* The pattern table that defines the conversion rules for each SAR ADC. Each table has 8 items, in which channel selection,
* resolution and attenuation are stored. When the conversion is started, the controller reads conversion rules from the
* pattern table one by one. For each controller the scan sequence has at most 8 different rules before repeating itself.
*
* @param adc_n ADC unit.
* @param pattern_index Items index. Range: 0 ~ 7.
* @param pattern Stored conversion rules.
*/
static inline void adc_ll_digi_set_pattern_table(adc_unit_t adc_n, uint32_t pattern_index, adc_digi_pattern_config_t table)
{
uint32_t tab;
uint8_t index = pattern_index / 4;
uint8_t offset = (pattern_index % 4) * 6;
adc_ll_digi_pattern_table_t pattern = {0};
pattern.val = (table.atten & 0x3) | ((table.channel & 0x7) << 2) | ((table.unit & 0x1) << 5);
tab = APB_SARADC.sar_patt_tab[index].sar_patt_tab1; // Read old register value
tab &= (~(0xFC0000 >> offset)); // Clear old data
tab |= ((uint32_t)(pattern.val & 0x3F) << 18) >> offset; // Fill in the new data
APB_SARADC.sar_patt_tab[index].sar_patt_tab1 = tab; // Write back
}
/**
* Reset the pattern table pointer, then take the measurement rule from table header in next measurement.
*
* @param adc_n ADC unit.
*/
static inline void adc_ll_digi_clear_pattern_table(adc_unit_t adc_n)
{
APB_SARADC.ctrl.sar_patt_p_clear = 1;
APB_SARADC.ctrl.sar_patt_p_clear = 0;
}
/**
* Sets the number of cycles required for the conversion to complete and wait for the arbiter to stabilize.
*
* @note Only ADC2 have arbiter function.
* @param cycle range: 0 ~ 4.
*/
static inline void adc_ll_digi_set_arbiter_stable_cycle(uint32_t cycle)
{
APB_SARADC.ctrl.wait_arb_cycle = cycle;
}
/**
* ADC Digital controller output data invert or not.
*
* @param adc_n ADC unit.
* @param inv_en data invert or not.
*/
static inline void adc_ll_digi_output_invert(adc_unit_t adc_n, bool inv_en)
{
if (adc_n == ADC_UNIT_1) {
APB_SARADC.ctrl2.sar1_inv = inv_en; // Enable / Disable ADC data invert
} else { // adc_n == ADC_UNIT_2
APB_SARADC.ctrl2.sar2_inv = inv_en; // Enable / Disable ADC data invert
}
}
/**
* Set the interval clock cycle for the digital controller to trigger the measurement.
* Expression: `trigger_meas_freq` = `controller_clk` / 2 / interval.
*
* @note The trigger interval should not be smaller than the sampling time of the SAR ADC.
* @param cycle The clock cycle (trigger interval) of the measurement. Range: 30 ~ 4095.
*/
static inline void adc_ll_digi_set_trigger_interval(uint32_t cycle)
{
APB_SARADC.ctrl2.timer_target = cycle;
}
/**
* Enable digital controller timer to trigger the measurement.
*/
static inline void adc_ll_digi_trigger_enable(void)
{
APB_SARADC.ctrl2.timer_en = 1;
}
/**
* Disable digital controller timer to trigger the measurement.
*/
static inline void adc_ll_digi_trigger_disable(void)
{
APB_SARADC.ctrl2.timer_en = 0;
}
/**
* Set ADC digital controller clock division factor. The clock divided from `APLL` or `APB` clock.
* Expression: controller_clk = (APLL or APB) / (div_num + div_a / div_b + 1).
*
* @param div_num Division factor. Range: 0 ~ 255.
* @param div_b Division factor. Range: 1 ~ 63.
* @param div_a Division factor. Range: 0 ~ 63.
*/
static inline void adc_ll_digi_controller_clk_div(uint32_t div_num, uint32_t div_b, uint32_t div_a)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.apb_adc_clkm_conf, clkm_div_num, div_num);
APB_SARADC.apb_adc_clkm_conf.clkm_div_b = div_b;
APB_SARADC.apb_adc_clkm_conf.clkm_div_a = div_a;
}
/**
* Enable clock and select clock source for ADC digital controller.
*
* @param clk_src clock source for ADC digital controller.
*/
static inline void adc_ll_digi_clk_sel(adc_continuous_clk_src_t clk_src)
{
// TODO: temporary support
APB_SARADC.apb_adc_clkm_conf.clk_sel = 0;
APB_SARADC.ctrl.sar_clk_gated = 1;
}
/**
* Disable clock for ADC digital controller.
*/
static inline void adc_ll_digi_controller_clk_disable(void)
{
APB_SARADC.ctrl.sar_clk_gated = 0;
}
/**
* Reset adc digital controller filter.
*
* @param idx Filter index
* @param adc_n ADC unit.
*/
static inline void adc_ll_digi_filter_reset(adc_digi_iir_filter_t idx, adc_unit_t adc_n)
{
(void)adc_n;
APB_SARADC.filter_ctrl0.filter_reset = 1;
APB_SARADC.filter_ctrl0.filter_reset = 0;
}
/**
* Set adc digital controller filter coeff.
*
* @param idx filter index
* @param adc_n adc unit
* @param channel adc channel
* @param coeff filter coeff
*/
static inline void adc_ll_digi_filter_set_factor(adc_digi_iir_filter_t idx, adc_unit_t adc_n, adc_channel_t channel, adc_digi_iir_filter_coeff_t coeff)
{
uint32_t factor_reg_val = 0;
switch (coeff) {
case ADC_DIGI_IIR_FILTER_COEFF_2:
factor_reg_val = 1;
break;
case ADC_DIGI_IIR_FILTER_COEFF_4:
factor_reg_val = 2;
break;
case ADC_DIGI_IIR_FILTER_COEFF_8:
factor_reg_val = 3;
break;
case ADC_DIGI_IIR_FILTER_COEFF_16:
factor_reg_val = 4;
break;
case ADC_DIGI_IIR_FILTER_COEFF_64:
factor_reg_val = 6;
break;
default:
HAL_ASSERT(false);
}
if (idx == ADC_DIGI_IIR_FILTER_0) {
APB_SARADC.filter_ctrl0.filter_channel0 = ((adc_n + 1) << 3) | (channel & 0x7);
APB_SARADC.filter_ctrl1.filter_factor0 = factor_reg_val;
} else if (idx == ADC_DIGI_IIR_FILTER_1) {
APB_SARADC.filter_ctrl0.filter_channel1 = ((adc_n + 1) << 3) | (channel & 0x7);
APB_SARADC.filter_ctrl1.filter_factor1 = factor_reg_val;
}
}
/**
* Enable adc digital controller filter.
* Filtering the ADC data to obtain smooth data at higher sampling rates.
*
* @param idx filter index
* @param adc_n ADC unit
* @param enable Enable / Disable
*/
static inline void adc_ll_digi_filter_enable(adc_digi_iir_filter_t idx, adc_unit_t adc_n, bool enable)
{
(void)adc_n;
if (!enable) {
if (idx == ADC_DIGI_IIR_FILTER_0) {
APB_SARADC.filter_ctrl0.filter_channel0 = 0xF;
APB_SARADC.filter_ctrl1.filter_factor0 = 0;
} else if (idx == ADC_DIGI_IIR_FILTER_1) {
APB_SARADC.filter_ctrl0.filter_channel1 = 0xF;
APB_SARADC.filter_ctrl1.filter_factor1 = 0;
}
}
//nothing to do to enable, after adc_ll_digi_filter_set_factor, it's enabled.
}
/**
* Set monitor mode of adc digital controller.
*
* @note If the channel info is not supported, the monitor function will not be enabled.
* @param adc_n ADC unit.
* @param is_larger true: If ADC_OUT > threshold, Generates monitor interrupt.
* false: If ADC_OUT < threshold, Generates monitor interrupt.
*/
static inline void adc_ll_digi_monitor_set_mode(adc_digi_monitor_idx_t idx, adc_digi_monitor_t *cfg)
{
if (idx == ADC_DIGI_MONITOR_IDX0) {
APB_SARADC.thres0_ctrl.thres0_channel = (cfg->adc_unit << 3) | (cfg->channel & 0x7);
APB_SARADC.thres0_ctrl.thres0_high = cfg->h_threshold;
APB_SARADC.thres0_ctrl.thres0_low = cfg->l_threshold;
} else { // ADC_DIGI_MONITOR_IDX1
APB_SARADC.thres1_ctrl.thres1_channel = (cfg->adc_unit << 3) | (cfg->channel & 0x7);
APB_SARADC.thres1_ctrl.thres1_high = cfg->h_threshold;
APB_SARADC.thres1_ctrl.thres1_low = cfg->l_threshold;
}
}
/**
* Enable/disable monitor of adc digital controller.
*
* @note If the channel info is not supported, the monitor function will not be enabled.
* @param adc_n ADC unit.
*/
static inline void adc_ll_digi_monitor_disable(adc_digi_monitor_idx_t idx)
{
if (idx == ADC_DIGI_MONITOR_IDX0) {
APB_SARADC.thres0_ctrl.thres0_channel = 0xF;
} else { // ADC_DIGI_MONITOR_IDX1
APB_SARADC.thres1_ctrl.thres1_channel = 0xF;
}
}
/**
* Set DMA eof num of adc digital controller.
* If the number of measurements reaches `dma_eof_num`, then `dma_in_suc_eof` signal is generated.
*
* @param num eof num of DMA.
*/
static inline void adc_ll_digi_dma_set_eof_num(uint32_t num)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(APB_SARADC.dma_conf, apb_adc_eof_num, num);
}
/**
* Enable output data to DMA from adc digital controller.
*/
static inline void adc_ll_digi_dma_enable(void)
{
APB_SARADC.dma_conf.apb_adc_trans = 1;
}
/**
* Disable output data to DMA from adc digital controller.
*/
static inline void adc_ll_digi_dma_disable(void)
{
APB_SARADC.dma_conf.apb_adc_trans = 0;
}
/**
* Reset adc digital controller.
*/
static inline void adc_ll_digi_reset(void)
{
APB_SARADC.dma_conf.apb_adc_reset_fsm = 1;
APB_SARADC.dma_conf.apb_adc_reset_fsm = 0;
}
/*---------------------------------------------------------------
PWDET(Power detect) controller setting
---------------------------------------------------------------*/
/**
* Set adc cct for PWDET controller.
*
* @note Capacitor tuning of the PA power monitor. cct set to the same value with PHY.
* @param cct Range: 0 ~ 7.
*/
static inline void adc_ll_pwdet_set_cct(uint32_t cct)
{
/* Capacitor tuning of the PA power monitor. cct set to the same value with PHY. */
abort();
}
/**
* Get adc cct for PWDET controller.
*
* @note Capacitor tuning of the PA power monitor. cct set to the same value with PHY.
* @return cct Range: 0 ~ 7.
*/
static inline uint32_t adc_ll_pwdet_get_cct(void)
{
/* Capacitor tuning of the PA power monitor. cct set to the same value with PHY. */
abort();
}
/*---------------------------------------------------------------
Common setting
---------------------------------------------------------------*/
/**
* Set ADC module power management.
*
* @param manage Set ADC power status.
*/
static inline void adc_ll_set_power_manage(adc_ll_power_t manage)
{
//HW bug, use `sar_ctrl_ll_set_power_mode_from_pwdet` instead, `APB_SARADC.ctrl.xpd_sar_force` doesn not effect
//Leave here for a record
}
__attribute__((always_inline))
static inline void adc_ll_set_controller(adc_unit_t adc_n, adc_ll_controller_t ctrl)
{
//Not used on ESP32H4
}
/**
* Set ADC2 module arbiter work mode.
* The arbiter is to improve the use efficiency of ADC2. After the control right is robbed by the high priority,
* the low priority controller will read the invalid ADC data, and the validity of the data can be judged by the flag bit in the data.
*
* @note Only ADC2 support arbiter.
* @note The arbiter's working clock is APB_CLK. When the APB_CLK clock drops below 8 MHz, the arbiter must be in shield mode.
*
* @param mode Refer to `adc_arbiter_mode_t`.
*/
__attribute__((always_inline))
static inline void adc_ll_set_arbiter_work_mode(adc_arbiter_mode_t mode)
{
if (mode == ADC_ARB_MODE_FIX) {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_grant_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_fix_priority = 1;
} else if (mode == ADC_ARB_MODE_LOOP) {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_grant_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_fix_priority = 0;
} else {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_grant_force = 1; // Shield arbiter.
}
}
/**
* Set ADC2 module controller priority in arbiter.
* The arbiter is to improve the use efficiency of ADC2. After the control right is robbed by the high priority,
* the low priority controller will read the invalid ADC data, and the validity of the data can be judged by the flag bit in the data.
*
* @note Only ADC2 support arbiter.
* @note The arbiter's working clock is APB_CLK. When the APB_CLK clock drops below 8 MHz, the arbiter must be in shield mode.
* @note Default priority: Wi-Fi(2) > RTC(1) > Digital(0);
*
* @param pri_rtc RTC controller priority. Range: 0 ~ 2.
* @param pri_dig Digital controller priority. Range: 0 ~ 2.
* @param pri_pwdet Wi-Fi controller priority. Range: 0 ~ 2.
*/
__attribute__((always_inline))
static inline void adc_ll_set_arbiter_priority(uint8_t pri_rtc, uint8_t pri_dig, uint8_t pri_pwdet)
{
if (pri_rtc != pri_dig && pri_rtc != pri_pwdet && pri_dig != pri_pwdet) {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_rtc_priority = pri_rtc;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_apb_priority = pri_dig;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_wifi_priority = pri_pwdet;
}
/* Should select highest priority controller. */
if (pri_rtc > pri_dig) {
if (pri_rtc > pri_pwdet) {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_apb_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_rtc_force = 1;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_wifi_force = 0;
} else {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_apb_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_rtc_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_wifi_force = 1;
}
} else {
if (pri_dig > pri_pwdet) {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_apb_force = 1;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_rtc_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_wifi_force = 0;
} else {
APB_SARADC.apb_adc_arb_ctrl.adc_arb_apb_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_rtc_force = 0;
APB_SARADC.apb_adc_arb_ctrl.adc_arb_wifi_force = 1;
}
}
}
/* ADC calibration code. */
/**
* @brief Set common calibration configuration. Should be shared with other parts (PWDET).
*/
__attribute__((always_inline))
static inline void adc_ll_calibration_init(adc_unit_t adc_n)
{
if (adc_n == ADC_UNIT_1) {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_DREF_ADDR, 1);
} else {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_DREF_ADDR, 1);
}
}
/**
* Configure the registers for ADC calibration. You need to call the ``adc_ll_calibration_finish`` interface to resume after calibration.
*
* @note Different ADC units and different attenuation options use different calibration data (initial data).
*
* @param adc_n ADC index number.
* @param channel adc channel number.
* @param internal_gnd true: Disconnect from the IO port and use the internal GND as the calibration voltage.
* false: Use IO external voltage as calibration voltage.
*/
static inline void adc_ll_calibration_prepare(adc_unit_t adc_n, adc_channel_t channel, bool internal_gnd)
{
/* Enable/disable internal connect GND (for calibration). */
if (adc_n == ADC_UNIT_1) {
if (internal_gnd) {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_ENCAL_GND_ADDR, 1);
} else {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_ENCAL_GND_ADDR, 0);
}
} else {
if (internal_gnd) {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_ENCAL_GND_ADDR, 1);
} else {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_ENCAL_GND_ADDR, 0);
}
}
}
/**
* Resume register status after calibration.
*
* @param adc_n ADC index number.
*/
static inline void adc_ll_calibration_finish(adc_unit_t adc_n)
{
if (adc_n == ADC_UNIT_1) {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_ENCAL_GND_ADDR, 0);
} else {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_ENCAL_GND_ADDR, 0);
}
}
/**
* Set the calibration result to ADC.
*
* @note Different ADC units and different attenuation options use different calibration data (initial data).
*
* @param adc_n ADC index number.
*/
__attribute__((always_inline))
static inline void adc_ll_set_calibration_param(adc_unit_t adc_n, uint32_t param)
{
uint8_t msb = param >> 8;
uint8_t lsb = param & 0xFF;
if (adc_n == ADC_UNIT_1) {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_INITIAL_CODE_HIGH_ADDR, msb);
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR1_INITIAL_CODE_LOW_ADDR, lsb);
} else {
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_INITIAL_CODE_HIGH_ADDR, msb);
REGI2C_WRITE_MASK(I2C_SAR_ADC, ADC_SAR2_INITIAL_CODE_LOW_ADDR, lsb);
}
}
/* Temp code end. */
/*---------------------------------------------------------------
Single Read
---------------------------------------------------------------*/
/**
* Set adc output data format for oneshot mode
*
* @note ESP32C3 Oneshot mode only supports 12bit.
* @param adc_n ADC unit.
* @param bits Output data bits width option.
*/
static inline void adc_oneshot_ll_set_output_bits(adc_unit_t adc_n, adc_bitwidth_t bits)
{
abort(); //TODO IDF-3908
// //ESP32C3 only supports 12bit, leave here for compatibility
// HAL_ASSERT(bits == ADC_BITWIDTH_12);
}
/**
* Enable adc channel to start convert.
*
* @note Only one channel can be selected for measurement.
*
* @param adc_n ADC unit.
* @param channel ADC channel number for each ADCn.
*/
static inline void adc_oneshot_ll_set_channel(adc_unit_t adc_n, adc_channel_t channel)
{
abort(); //TODO IDF-3908
// APB_SARADC.onetime_sample.onetime_channel = ((adc_n << 3) | channel);
}
/**
* Disable adc channel to start convert.
*
* @note Only one channel can be selected in once measurement.
*
* @param adc_n ADC unit.
*/
static inline void adc_oneshot_ll_disable_channel(adc_unit_t adc_n)
{
abort(); //TODO IDF-3908
// if (adc_n == ADC_UNIT_1) {
// APB_SARADC.onetime_sample.onetime_channel = ((adc_n << 3) | 0xF);
// } else { // adc_n == ADC_UNIT_2
// APB_SARADC.onetime_sample.onetime_channel = ((adc_n << 3) | 0x1);
// }
}
/**
* Start oneshot conversion by software
*
* @param val Usage: set to 1 to start the ADC conversion. The step signal should at least keep 3 ADC digital controller clock cycle,
* otherwise the step signal may not be captured by the ADC digital controller when its frequency is slow.
* This hardware limitation will be removed in future versions.
*/
static inline void adc_oneshot_ll_start(bool val)
{
abort(); //TODO IDF-3908
// APB_SARADC.onetime_sample.onetime_start = val;
}
/**
* Clear the event for each ADCn for Oneshot mode
*
* @param event ADC event
*/
static inline void adc_oneshot_ll_clear_event(uint32_t event_mask)
{
abort(); //TODO IDF-3908
// APB_SARADC.int_clr.val |= event_mask;
}
/**
* Check the event for each ADCn for Oneshot mode
*
* @param event ADC event
*
* @return
* -true : The conversion process is finish.
* -false : The conversion process is not finish.
*/
static inline bool adc_oneshot_ll_get_event(uint32_t event_mask)
{
abort(); //TODO IDF-3908
// return (APB_SARADC.int_raw.val & event_mask);
}
/**
* Get the converted value for each ADCn for RTC controller.
*
* @param adc_n ADC unit.
* @return
* - Converted value.
*/
static inline uint32_t adc_oneshot_ll_get_raw_result(adc_unit_t adc_n)
{
abort(); //TODO IDF-3908
// uint32_t ret_val = 0;
// if (adc_n == ADC_UNIT_1) {
// ret_val = APB_SARADC.apb_saradc1_data_status.adc1_data & 0xfff;
// } else { // adc_n == ADC_UNIT_2
// ret_val = APB_SARADC.apb_saradc2_data_status.adc2_data & 0xfff;
// }
// return ret_val;
}
/**
* Analyze whether the obtained raw data is correct.
* ADC2 can use arbiter. The arbitration result is stored in the channel information of the returned data.
*
* @param adc_n ADC unit.
* @param raw_data ADC raw data input (convert value).
* @return
* - 1: The data is correct to use.
* - 0: The data is invalid.
*/
static inline bool adc_oneshot_ll_raw_check_valid(adc_unit_t adc_n, uint32_t raw_data)
{
abort(); //TODO IDF-3908
// if (adc_n == ADC_UNIT_1) {
// return true;
// }
// //The raw data API returns value without channel information. Read value directly from the register
// if (((APB_SARADC.apb_saradc2_data_status.adc2_data >> 13) & 0xF) > 9) {
// return false;
// }
// return true;
}
/**
* ADC module RTC output data invert or not.
*
* @param adc_n ADC unit.
* @param inv_en data invert or not.
*/
static inline void adc_oneshot_ll_output_invert(adc_unit_t adc_n, bool inv_en)
{
abort(); //TODO IDF-3908
// (void)adc_n;
// (void)inv_en;
// //For compatibility
}
/**
* Enable oneshot conversion trigger
*
* @param adc_n ADC unit
*/
static inline void adc_oneshot_ll_enable(adc_unit_t adc_n)
{
abort(); //TODO IDF-3908
// if (adc_n == ADC_UNIT_1) {
// APB_SARADC.onetime_sample.adc1_onetime_sample = 1;
// } else {
// APB_SARADC.onetime_sample.adc2_onetime_sample = 1;
// }
}
/**
* Disable oneshot conversion trigger for all the ADC units
*/
static inline void adc_oneshot_ll_disable_all_unit(void)
{
abort(); //TODO IDF-3908
// APB_SARADC.onetime_sample.adc1_onetime_sample = 0;
// APB_SARADC.onetime_sample.adc2_onetime_sample = 0;
}
/**
* Set attenuation
*
* @note Attenuation is for all channels
*
* @param adc_n ADC unit
* @param channel ADC channel
* @param atten ADC attenuation
*/
static inline void adc_oneshot_ll_set_atten(adc_unit_t adc_n, adc_channel_t channel, adc_atten_t atten)
{
abort(); //TODO IDF-3908
// (void)adc_n;
// (void)channel;
// // Attenuation is for all channels, unit and channel are for compatibility
// APB_SARADC.onetime_sample.onetime_atten = atten;
}
#ifdef __cplusplus
}
#endif

225
components/hal/esp32h4/include/hal/aes_ll.h
View File

@ -1,225 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include <string.h>
#include "soc/hwcrypto_reg.h"
#include "hal/aes_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief State of AES accelerator, busy, idle or done
*
*/
typedef enum {
ESP_AES_STATE_IDLE = 0, /* AES accelerator is idle */
ESP_AES_STATE_BUSY, /* Transform in progress */
ESP_AES_STATE_DONE, /* Transform completed */
} esp_aes_state_t;
/**
* @brief Write the encryption/decryption key to hardware
*
* @param key Key to be written to the AES hardware
* @param key_word_len Number of words in the key
*
* @return Number of bytes written to hardware, used for fault injection check
*/
static inline uint8_t aes_ll_write_key(const uint8_t *key, size_t key_word_len)
{
/* This variable is used for fault injection checks, so marked volatile to avoid optimisation */
volatile uint8_t key_in_hardware = 0;
/* Memcpy to avoid potential unaligned access */
uint32_t key_word;
for (int i = 0; i < key_word_len; i++) {
memcpy(&key_word, key + 4 * i, 4);
REG_WRITE(AES_KEY_BASE + i * 4, key_word);
key_in_hardware += 4;
}
return key_in_hardware;
}
/**
* @brief Sets the mode
*
* @param mode ESP_AES_ENCRYPT = 1, or ESP_AES_DECRYPT = 0
* @param key_bytes Number of bytes in the key
*/
static inline void aes_ll_set_mode(int mode, uint8_t key_bytes)
{
const uint32_t MODE_DECRYPT_BIT = 4;
unsigned mode_reg_base = (mode == ESP_AES_ENCRYPT) ? 0 : MODE_DECRYPT_BIT;
/* See TRM for the mapping between keylength and mode bit */
REG_WRITE(AES_MODE_REG, mode_reg_base + ((key_bytes / 8) - 2));
}
/**
* @brief Writes message block to AES hardware
*
* @param input Block to be written
*/
static inline void aes_ll_write_block(const void *input)
{
uint32_t input_word;
for (int i = 0; i < AES_BLOCK_WORDS; i++) {
memcpy(&input_word, (uint8_t*)input + 4 * i, 4);
REG_WRITE(AES_TEXT_IN_BASE + i * 4, input_word);
}
}
/**
* @brief Read the AES block
*
* @param output the output of the transform, length = AES_BLOCK_BYTES
*/
static inline void aes_ll_read_block(void *output)
{
uint32_t output_word;
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < AES_BLOCK_WORDS; i++) {
output_word = REG_READ(AES_TEXT_OUT_BASE + (i * REG_WIDTH));
/* Memcpy to avoid potential unaligned access */
memcpy( (uint8_t*)output + i * 4, &output_word, sizeof(output_word));
}
}
/**
* @brief Starts block transform
*
*/
static inline void aes_ll_start_transform(void)
{
REG_WRITE(AES_TRIGGER_REG, 1);
}
/**
* @brief Read state of AES accelerator
*
* @return esp_aes_state_t
*/
static inline esp_aes_state_t aes_ll_get_state(void)
{
return REG_READ(AES_STATE_REG);
}
/**
* @brief Set mode of operation
*
* @note Only used for DMA transforms
*
* @param mode
*/
static inline void aes_ll_set_block_mode(esp_aes_mode_t mode)
{
REG_WRITE(AES_BLOCK_MODE_REG, mode);
}
/**
* @brief Set AES-CTR counter to INC32
*
* @note Only affects AES-CTR mode
*
*/
static inline void aes_ll_set_inc(void)
{
REG_WRITE(AES_INC_SEL_REG, 0);
}
/**
* @brief Release the DMA
*
*/
static inline void aes_ll_dma_exit(void)
{
REG_WRITE(AES_DMA_EXIT_REG, 0);
}
/**
* @brief Sets the number of blocks to be transformed
*
* @note Only used for DMA transforms
*
* @param num_blocks Number of blocks to transform
*/
static inline void aes_ll_set_num_blocks(size_t num_blocks)
{
REG_WRITE(AES_BLOCK_NUM_REG, num_blocks);
}
/*
* Write IV to hardware iv registers
*/
static inline void aes_ll_set_iv(const uint8_t *iv)
{
uint32_t *reg_addr_buf = (uint32_t *)(AES_IV_BASE);
uint32_t iv_word;
for (int i = 0; i < IV_WORDS; i++ ) {
/* Memcpy to avoid potential unaligned access */
memcpy(&iv_word, iv + 4 * i, sizeof(iv_word));
REG_WRITE(&reg_addr_buf[i], iv_word);
}
}
/*
* Read IV from hardware iv registers
*/
static inline void aes_ll_read_iv(uint8_t *iv)
{
uint32_t iv_word;
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < IV_WORDS; i++) {
iv_word = REG_READ(AES_IV_BASE + (i * REG_WIDTH));
/* Memcpy to avoid potential unaligned access */
memcpy(iv + i * 4, &iv_word, sizeof(iv_word));
}
}
/**
* @brief Enable or disable DMA mode
*
* @param enable true to enable, false to disable.
*/
static inline void aes_ll_dma_enable(bool enable)
{
REG_WRITE(AES_DMA_ENABLE_REG, enable);
}
/**
* @brief Enable or disable transform completed interrupt
*
* @param enable true to enable, false to disable.
*/
static inline void aes_ll_interrupt_enable(bool enable)
{
REG_WRITE(AES_INT_ENA_REG, enable);
}
/**
* @brief Clears the interrupt
*
*/
static inline void aes_ll_interrupt_clear(void)
{
REG_WRITE(AES_INT_CLEAR_REG, 1);
}
#ifdef __cplusplus
}
#endif

111
components/hal/esp32h4/include/hal/brownout_ll.h
View File

@ -1,111 +0,0 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The ll is not public api, don't use in application code.
* See readme.md in hal/readme.md
******************************************************************************/
#pragma once
#include <stdbool.h>
#include "soc/rtc_cntl_struct.h"
#include "hal/regi2c_ctrl.h"
#include "soc/regi2c_brownout.h"
#include "i2c_pmu.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief power down the flash when a brown out happens.
*
* @param enable true: power down flash. false: not power down
*/
static inline void brownout_ll_enable_flash_power_down(bool enable)
{
RTCCNTL.brown_out.close_flash_ena = enable;
}
/**
* @brief power down the RF circuits when a brown out happens
*
* @param enable true: power down. false: not power done.
*/
static inline void brownout_ll_enable_rf_power_down(bool enable)
{
RTCCNTL.brown_out.pd_rf_ena = enable;
}
/**
* @brief Enable this to reset brown out
*
* @note: If brown out interrupt is used, this should be disabled.
*
* @param reset_ena true: enable reset. false: disable reset.
* @param reset_wait brown out reset wait cycles
* @param select 1: chip reset, 0: system reset
*/
static inline void brownout_ll_reset_config(bool reset_ena, uint32_t reset_wait, uint8_t select)
{
RTCCNTL.brown_out.rst_wait = reset_wait;
RTCCNTL.brown_out.rst_ena = reset_ena;
RTCCNTL.brown_out.rst_sel = select;
}
/**
* @brief Set brown out threshold
*
* @param threshold brownout threshold
*/
static inline void brownout_ll_set_threshold(uint8_t threshold)
{
REGI2C_WRITE_MASK(I2C_PMU, I2C_PMU_OC_DREF_LVDET, threshold);
}
/**
* @brief Set this bit to enable the brown out detection
*
* @param bod_enable true: enable, false: disable
*/
static inline void brownout_ll_bod_enable(bool bod_enable)
{
RTCCNTL.brown_out.ena = bod_enable;
}
/**
* @brief configure the waiting cycles before sending an interrupt
*
* @param cycle waiting cycles.
*/
static inline void brownout_ll_set_intr_wait_cycles(uint8_t cycle)
{
// Not supported on ESP32H4
}
/**
* @brief Enable brown out interrupt
*
* @param enable true: enable, false: disable
*/
static inline void brownout_ll_intr_enable(bool enable)
{
RTCCNTL.int_ena.rtc_brown_out = enable;
}
/**
* @brief Clear interrupt bits.
*/
__attribute__((always_inline))
static inline void brownout_ll_intr_clear(void)
{
RTCCNTL.int_clr.rtc_brown_out = 1;
}
#ifdef __cplusplus
}
#endif

189
components/hal/esp32h4/include/hal/cache_ll.h
View File

@ -1,189 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for Cache register operations
#pragma once
#include "soc/extmem_reg.h"
#include "soc/ext_mem_defs.h"
#include "hal/cache_types.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
#define CACHE_LL_DEFAULT_IBUS_MASK CACHE_BUS_IBUS0
#define CACHE_LL_DEFAULT_DBUS_MASK CACHE_BUS_DBUS0
#define CACHE_LL_L1_ACCESS_EVENT_MASK (0x3f)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_WR_IC (1<<5)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_REJECT (1<<4)
#define CACHE_LL_L1_ACCESS_EVENT_DBUS_ACS_MSK_IC (1<<3)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_REJECT (1<<2)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_WR_IC (1<<1)
#define CACHE_LL_L1_ACCESS_EVENT_IBUS_ACS_MSK_IC (1<<0)
#define CACHE_LL_L1_ILG_EVENT_MASK (0x23)
#define CACHE_LL_L1_ILG_EVENT_MMU_ENTRY_FAULT (1<<5)
#define CACHE_LL_L1_ILG_EVENT_PRELOAD_OP_FAULT (1<<1)
#define CACHE_LL_L1_ILG_EVENT_SYNC_OP_FAULT (1<<0)
/**
* @brief Get the buses of a particular cache that are mapped to a virtual address range
*
* External virtual address can only be accessed when the involved cache buses are enabled.
* This API is to get the cache buses where the memory region (from `vaddr_start` to `vaddr_end`) reside.
*
* @param cache_id cache ID (when l1 cache is per core)
* @param vaddr_start virtual address start
* @param len vaddr length
*/
#if !BOOTLOADER_BUILD
__attribute__((always_inline))
#endif
static inline cache_bus_mask_t cache_ll_l1_get_bus(uint32_t cache_id, uint32_t vaddr_start, uint32_t len)
{
HAL_ASSERT(cache_id == 0);
cache_bus_mask_t mask = 0;
uint32_t vaddr_end = vaddr_start + len - 1;
if (vaddr_start >= IRAM0_CACHE_ADDRESS_LOW && vaddr_end < IRAM0_CACHE_ADDRESS_HIGH) {
mask |= CACHE_BUS_IBUS0;
} else if (vaddr_start >= DRAM0_CACHE_ADDRESS_LOW && vaddr_end < DRAM0_CACHE_ADDRESS_HIGH) {
mask |= CACHE_BUS_DBUS0;
} else {
HAL_ASSERT(0); //Out of region
}
return mask;
}
/**
* Enable the Cache Buses
*
* @param cache_id cache ID (when l1 cache is per core)
* @param mask To know which buses should be enabled
*/
#if !BOOTLOADER_BUILD
__attribute__((always_inline))
#endif
static inline void cache_ll_l1_enable_bus(uint32_t cache_id, cache_bus_mask_t mask)
{
HAL_ASSERT(cache_id == 0);
//On esp32h4, only `CACHE_BUS_IBUS0` and `CACHE_BUS_DBUS0` are supported. Use `cache_ll_l1_get_bus()` to get your bus first
HAL_ASSERT((mask & (CACHE_BUS_IBUS1 | CACHE_BUS_IBUS2| CACHE_BUS_DBUS1 | CACHE_BUS_DBUS2)) == 0);
uint32_t ibus_mask = 0;
ibus_mask |= (mask & CACHE_BUS_IBUS0) ? EXTMEM_ICACHE_SHUT_IBUS : 0;
REG_CLR_BIT(EXTMEM_ICACHE_CTRL1_REG, ibus_mask);
uint32_t dbus_mask = 0;
dbus_mask |= (mask & CACHE_BUS_DBUS0) ? EXTMEM_ICACHE_SHUT_DBUS : 0;
REG_CLR_BIT(EXTMEM_ICACHE_CTRL1_REG, dbus_mask);
}
/**
* Disable the Cache Buses
*
* @param cache_id cache ID (when l1 cache is per core)
* @param mask To know which buses should be disabled
*/
__attribute__((always_inline))
static inline void cache_ll_l1_disable_bus(uint32_t cache_id, cache_bus_mask_t mask)
{
HAL_ASSERT(cache_id == 0);
//On esp32h4, only `CACHE_BUS_IBUS0` and `CACHE_BUS_DBUS0` are supported. Use `cache_ll_l1_get_bus()` to get your bus first
HAL_ASSERT((mask & (CACHE_BUS_IBUS1 | CACHE_BUS_IBUS2| CACHE_BUS_DBUS1 | CACHE_BUS_DBUS2)) == 0);
uint32_t ibus_mask = 0;
ibus_mask |= (mask & CACHE_BUS_IBUS0) ? EXTMEM_ICACHE_SHUT_IBUS : 0;
REG_SET_BIT(EXTMEM_ICACHE_CTRL1_REG, ibus_mask);
uint32_t dbus_mask = 0;
dbus_mask |= (mask & CACHE_BUS_DBUS0) ? EXTMEM_ICACHE_SHUT_DBUS : 0;
REG_SET_BIT(EXTMEM_ICACHE_CTRL1_REG, dbus_mask);
}
/*------------------------------------------------------------------------------
* Interrupt
*----------------------------------------------------------------------------*/
/**
* @brief Enable Cache access error interrupt
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_enable_access_error_intr(uint32_t cache_id, uint32_t mask)
{
SET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_ENA_REG, mask);
}
/**
* @brief Clear Cache access error interrupt status
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_clear_access_error_intr(uint32_t cache_id, uint32_t mask)
{
SET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_CLR_REG, mask);
}
/**
* @brief Get Cache access error interrupt status
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*
* @return Status mask
*/
static inline uint32_t cache_ll_l1_get_access_error_intr_status(uint32_t cache_id, uint32_t mask)
{
return GET_PERI_REG_MASK(EXTMEM_CORE0_ACS_CACHE_INT_ST_REG, mask);
}
/**
* @brief Enable Cache illegal error interrupt
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_enable_illegal_error_intr(uint32_t cache_id, uint32_t mask)
{
SET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_ENA_REG, mask);
}
/**
* @brief Clear Cache illegal error interrupt status
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*/
static inline void cache_ll_l1_clear_illegal_error_intr(uint32_t cache_id, uint32_t mask)
{
SET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_CLR_REG, mask);
}
/**
* @brief Get Cache illegal error interrupt status
*
* @param cache_id Cache ID, not used on H4. For compabitlity
* @param mask Interrupt mask
*
* @return Status mask
*/
static inline uint32_t cache_ll_l1_get_illegal_error_intr_status(uint32_t cache_id, uint32_t mask)
{
return GET_PERI_REG_MASK(EXTMEM_CACHE_ILG_INT_ST_REG, mask);
}
#ifdef __cplusplus
}
#endif

224
components/hal/esp32h4/include/hal/clk_gate_ll.h
View File

@ -1,224 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "soc/periph_defs.h"
#include "soc/system_reg.h"
#include "soc/syscon_reg.h"
#include "soc/dport_access.h"
#include "esp_attr.h"
static inline uint32_t periph_ll_get_clk_en_mask(periph_module_t periph)
{
switch (periph) {
case PERIPH_SARADC_MODULE:
return SYSTEM_APB_SARADC_CLK_EN;
case PERIPH_RMT_MODULE:
return SYSTEM_RMT_CLK_EN;
case PERIPH_LEDC_MODULE:
return SYSTEM_LEDC_CLK_EN;
case PERIPH_UART0_MODULE:
return SYSTEM_UART_CLK_EN;
case PERIPH_UART1_MODULE:
return SYSTEM_UART1_CLK_EN;
case PERIPH_I2C0_MODULE:
return SYSTEM_I2C_EXT0_CLK_EN;
case PERIPH_I2S1_MODULE:
return SYSTEM_I2S1_CLK_EN;
case PERIPH_TIMG0_MODULE:
return SYSTEM_TIMERGROUP_CLK_EN;
case PERIPH_TIMG1_MODULE:
return SYSTEM_TIMERGROUP1_CLK_EN;
case PERIPH_UHCI0_MODULE:
return SYSTEM_UHCI0_CLK_EN;
case PERIPH_SYSTIMER_MODULE:
return SYSTEM_SYSTIMER_CLK_EN;
case PERIPH_SPI_MODULE:
return SYSTEM_SPI01_CLK_EN;
case PERIPH_SPI2_MODULE:
return SYSTEM_SPI2_CLK_EN;
case PERIPH_TWAI_MODULE:
return SYSTEM_TWAI_CLK_EN;
case PERIPH_GDMA_MODULE:
return SYSTEM_DMA_CLK_EN;
case PERIPH_AES_MODULE:
return SYSTEM_CRYPTO_AES_CLK_EN;
case PERIPH_SHA_MODULE:
return SYSTEM_CRYPTO_SHA_CLK_EN;
case PERIPH_ECC_MODULE:
return SYSTEM_CRYPTO_ECC_CLK_EN;
case PERIPH_RSA_MODULE:
return SYSTEM_CRYPTO_RSA_CLK_EN;
case PERIPH_HMAC_MODULE:
return SYSTEM_CRYPTO_HMAC_CLK_EN;
case PERIPH_DS_MODULE:
return SYSTEM_CRYPTO_DS_CLK_EN;
case PERIPH_TEMPSENSOR_MODULE:
return SYSTEM_TSENS_CLK_EN;
case PERIPH_ETM_MODULE:
return SYSTEM_ETM_CLK_EN;
case PERIPH_MODEM_RPA_MODULE:
return SYSTEM_BLE_SEC_BAH_CLK_EN;
default:
return 0;
}
}
static inline uint32_t periph_ll_get_rst_en_mask(periph_module_t periph, bool enable)
{
(void)enable; // unused
switch (periph) {
case PERIPH_SARADC_MODULE:
return SYSTEM_APB_SARADC_RST;
case PERIPH_RMT_MODULE:
return SYSTEM_RMT_RST;
case PERIPH_LEDC_MODULE:
return SYSTEM_LEDC_RST;
case PERIPH_UART0_MODULE:
return SYSTEM_UART_RST;
case PERIPH_UART1_MODULE:
return SYSTEM_UART1_RST;
case PERIPH_I2C0_MODULE:
return SYSTEM_I2C_EXT0_RST;
case PERIPH_I2S1_MODULE:
return SYSTEM_I2S1_RST;
case PERIPH_TIMG0_MODULE:
return SYSTEM_TIMERGROUP_RST;
case PERIPH_TIMG1_MODULE:
return SYSTEM_TIMERGROUP1_RST;
case PERIPH_UHCI0_MODULE:
return SYSTEM_UHCI0_RST;
case PERIPH_SYSTIMER_MODULE:
return SYSTEM_SYSTIMER_RST;
case PERIPH_GDMA_MODULE:
return SYSTEM_DMA_RST;
case PERIPH_SPI_MODULE:
return SYSTEM_SPI01_RST;
case PERIPH_SPI2_MODULE:
return SYSTEM_SPI2_RST;
case PERIPH_TWAI_MODULE:
return SYSTEM_TWAI_RST;
case PERIPH_HMAC_MODULE:
return SYSTEM_CRYPTO_HMAC_RST;
case PERIPH_TEMPSENSOR_MODULE:
return SYSTEM_TSENS_RST;
case PERIPH_ECC_MODULE:
return SYSTEM_CRYPTO_ECC_RST;
case PERIPH_AES_MODULE:
if (enable == true) {
// Clear reset on digital signature, otherwise AES unit is held in reset also.
return (SYSTEM_CRYPTO_AES_RST | SYSTEM_CRYPTO_DS_RST);
} else {
//Don't return other units to reset, as this pulls reset on RSA & SHA units, respectively.
return SYSTEM_CRYPTO_AES_RST;
}
case PERIPH_SHA_MODULE:
if (enable == true) {
// Clear reset on digital signature and HMAC, otherwise SHA is held in reset
return (SYSTEM_CRYPTO_SHA_RST | SYSTEM_CRYPTO_DS_RST | SYSTEM_CRYPTO_HMAC_RST);
} else {
// Don't assert reset on secure boot, otherwise AES is held in reset
return SYSTEM_CRYPTO_SHA_RST;
}
case PERIPH_RSA_MODULE:
if (enable == true) {
/* also clear reset on digital signature, otherwise RSA is held in reset */
return (SYSTEM_CRYPTO_RSA_RST | SYSTEM_CRYPTO_DS_RST);
} else {
/* don't reset digital signature unit, as this resets AES also */
return SYSTEM_CRYPTO_RSA_RST;
}
case PERIPH_DS_MODULE:
return SYSTEM_CRYPTO_DS_RST;
case PERIPH_ETM_MODULE:
return SYSTEM_ETM_RST;
case PERIPH_MODEM_RPA_MODULE:
return SYSTEM_BLE_SEC_BAH_RST;
default:
return 0;
}
}
static uint32_t periph_ll_get_clk_en_reg(periph_module_t periph)
{
switch (periph) {
case PERIPH_HMAC_MODULE:
case PERIPH_DS_MODULE:
case PERIPH_AES_MODULE:
case PERIPH_RSA_MODULE:
case PERIPH_SHA_MODULE:
case PERIPH_ECC_MODULE:
case PERIPH_GDMA_MODULE:
case PERIPH_TEMPSENSOR_MODULE:
case PERIPH_ETM_MODULE:
return SYSTEM_PERIP_CLK_EN1_REG;
case PERIPH_BT_MODULE:
return SYSTEM_MODEM_CLK_EN_REG;
case PERIPH_MODEM_RPA_MODULE:
return SYSTEM_MODEM_CLK_EN_REG;
default:
return SYSTEM_PERIP_CLK_EN0_REG;
}
}
static uint32_t periph_ll_get_rst_en_reg(periph_module_t periph)
{
switch (periph) {
case PERIPH_HMAC_MODULE:
case PERIPH_DS_MODULE:
case PERIPH_AES_MODULE:
case PERIPH_RSA_MODULE:
case PERIPH_SHA_MODULE:
case PERIPH_ECC_MODULE:
case PERIPH_GDMA_MODULE:
case PERIPH_TEMPSENSOR_MODULE:
case PERIPH_ETM_MODULE:
return SYSTEM_PERIP_RST_EN1_REG;
case PERIPH_BT_MODULE:
return SYSTEM_MODEM_RST_EN_REG;
case PERIPH_MODEM_RPA_MODULE:
return SYSTEM_MODEM_RST_EN_REG;
default:
return SYSTEM_PERIP_RST_EN0_REG;
}
}
static inline void periph_ll_enable_clk_clear_rst(periph_module_t periph)
{
DPORT_SET_PERI_REG_MASK(periph_ll_get_clk_en_reg(periph), periph_ll_get_clk_en_mask(periph));
DPORT_CLEAR_PERI_REG_MASK(periph_ll_get_rst_en_reg(periph), periph_ll_get_rst_en_mask(periph, true));
}
static inline void periph_ll_disable_clk_set_rst(periph_module_t periph)
{
DPORT_CLEAR_PERI_REG_MASK(periph_ll_get_clk_en_reg(periph), periph_ll_get_clk_en_mask(periph));
DPORT_SET_PERI_REG_MASK(periph_ll_get_rst_en_reg(periph), periph_ll_get_rst_en_mask(periph, false));
}
static inline void periph_ll_reset(periph_module_t periph)
{
DPORT_SET_PERI_REG_MASK(periph_ll_get_rst_en_reg(periph), periph_ll_get_rst_en_mask(periph, false));
DPORT_CLEAR_PERI_REG_MASK(periph_ll_get_rst_en_reg(periph), periph_ll_get_rst_en_mask(periph, false));
}
static inline bool IRAM_ATTR periph_ll_periph_enabled(periph_module_t periph)
{
return DPORT_REG_GET_BIT(periph_ll_get_rst_en_reg(periph), periph_ll_get_rst_en_mask(periph, false)) == 0 &&
DPORT_REG_GET_BIT(periph_ll_get_clk_en_reg(periph), periph_ll_get_clk_en_mask(periph)) != 0;
}
#ifdef __cplusplus
}
#endif

580
components/hal/esp32h4/include/hal/clk_tree_ll.h
View File

@ -1,580 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "soc/soc.h"
#include "soc/clk_tree_defs.h"
#include "soc/rtc.h"
#include "soc/system_reg.h"
#include "soc/clkrst_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "hal/regi2c_ctrl.h"
#include "soc/regi2c_bbpll.h"
#include "hal/assert.h"
#include "hal/log.h"
#include "esp32h4/rom/rtc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define MHZ (1000000)
#define CLK_LL_PLL_96M_FREQ_MHZ (96)
#define CLK_LL_XTAL32K_CONFIG_DEFAULT() { \
.dac = 3, \
.dres = 3, \
.dgm = 3, \
.dbuf = 1, \
}
#define CLK_LL_RC32K_DFREQ_DEFAULT 707
/**
* @brief XTAL32K_CLK enable modes
*/
typedef enum {
CLK_LL_XTAL32K_ENABLE_MODE_CRYSTAL, //!< Enable the external 32kHz crystal for XTAL32K_CLK
CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL, //!< Enable the external clock signal for XTAL32K_CLK
CLK_LL_XTAL32K_ENABLE_MODE_BOOTSTRAP, //!< Bootstrap the crystal oscillator for faster XTAL32K_CLK start up */
} clk_ll_xtal32k_enable_mode_t;
/**
* @brief XTAL32K_CLK configuration structure
*/
typedef struct {
uint32_t dac : 6;
uint32_t dres : 3;
uint32_t dgm : 3;
uint32_t dbuf: 1;
} clk_ll_xtal32k_config_t;
/**
* @brief Power up BBPLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_enable(void)
{
REG_CLR_BIT(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BB_I2C_FORCE_PD |
RTC_CNTL_BBPLL_FORCE_PD | RTC_CNTL_BBPLL_I2C_FORCE_PD);
}
/**
* @brief Power down BBPLL circuit
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_disable(void)
{
REG_SET_BIT(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BB_I2C_FORCE_PD |
RTC_CNTL_BBPLL_FORCE_PD | RTC_CNTL_BBPLL_I2C_FORCE_PD);
}
/**
* @brief Enable the 32kHz crystal oscillator
*
* @param mode Used to determine the xtal32k configuration parameters
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_enable(clk_ll_xtal32k_enable_mode_t mode)
{
// Configure xtal32k (or only for mode == CLK_LL_XTAL32K_ENABLE_MODE_CRYSTAL?)
clk_ll_xtal32k_config_t cfg = CLK_LL_XTAL32K_CONFIG_DEFAULT();
REG_SET_FIELD(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_DAC_XTAL_32K, cfg.dac);
REG_SET_FIELD(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_DRES_XTAL_32K, cfg.dres);
REG_SET_FIELD(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_DGM_XTAL_32K, cfg.dgm);
REG_SET_FIELD(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_DBUF_XTAL_32K, cfg.dbuf);
// Enable xtal32k xpd status
SET_PERI_REG_MASK(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_XPD_XTAL_32K);
if (mode == CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL) {
// Not supported yet?
;
}
}
/**
* @brief Disable the 32kHz crystal oscillator
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_disable(void)
{
// Set xtal32k xpd to be controlled by software
SET_PERI_REG_MASK(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_XTAL32K_XPD_FORCE);
// Disable xtal32k xpd status
CLEAR_PERI_REG_MASK(RTC_CNTL_EXT_XTL_CONF_REG, RTC_CNTL_XPD_XTAL_32K);
}
/**
* @brief Get the state of the 32kHz crystal clock
*
* @return True if the 32kHz XTAL is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_xtal32k_is_enabled(void)
{
uint32_t xtal_conf = READ_PERI_REG(RTC_CNTL_EXT_XTL_CONF_REG);
/* If xtal xpd is controlled by software */
bool xtal_xpd_sw = (xtal_conf & RTC_CNTL_XTAL32K_XPD_FORCE) >> RTC_CNTL_XTAL32K_XPD_FORCE_S;
/* If xtal xpd software control is on */
bool xtal_xpd_st = (xtal_conf & RTC_CNTL_XPD_XTAL_32K) >> RTC_CNTL_XPD_XTAL_32K_S;
// disabled = xtal_xpd_sw && !xtal_xpd_st; enabled = !disbaled
bool enabled = !xtal_xpd_sw || xtal_xpd_st;
return enabled;
}
/**
* @brief Enable the internal oscillator output for RC32K_CLK
*/
static inline __attribute__((always_inline)) void clk_ll_rc32k_enable(void)
{
// Configure rc32k
REG_SET_FIELD(RTC_CNTL_RC32K_CTRL_REG, RTC_CNTL_RC32K_DFREQ, CLK_LL_RC32K_DFREQ_DEFAULT);
// Enable rc32k xpd status
SET_PERI_REG_MASK(RTC_CNTL_RC32K_CTRL_REG, RTC_CNTL_RC32K_XPD);
}
/**
* @brief Disable the internal oscillator output for RC32k_CLK
*/
static inline __attribute__((always_inline)) void clk_ll_rc32k_disable(void)
{
// Configure rc32k
REG_SET_FIELD(RTC_CNTL_RC32K_CTRL_REG, RTC_CNTL_RC32K_DFREQ, CLK_LL_RC32K_DFREQ_DEFAULT);
// Disable rc32k xpd status
CLEAR_PERI_REG_MASK(RTC_CNTL_RC32K_CTRL_REG, RTC_CNTL_RC32K_XPD);
}
/**
* @brief Enable the digital RC_FAST_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Disable the digital RC_FAST_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Get the state of the digital RC_FAST_CLK
*
* @return True if the digital RC_FAST_CLK is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_rc_fast_digi_is_enabled(void)
{
return GET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_CLK8M_EN_M);
}
/**
* @brief Enable the digital RC32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc32k_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_RC32K_EN_M);
}
/**
* @brief Disable the digital RC32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_rc32k_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_RC32K_EN_M);
}
/**
* @brief Get the state of the digital RC32K_CLK
*
* @return True if the digital RC32K_CLK is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_rc32k_digi_is_enabled(void)
{
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_RC32K_EN);
}
/**
* @brief Enable the digital XTAL32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_digi_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN_M);
}
/**
* @brief Disable the digital XTAL32K_CLK, which is used to support peripherals.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal32k_digi_disable(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN_M);
}
/**
* @brief Get the state of the digital XTAL32K_CLK
*
* @return True if the digital XTAL32K_CLK is enabled
*/
static inline __attribute__((always_inline)) bool clk_ll_xtal32k_digi_is_enabled(void)
{
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_DIG_XTAL32K_EN);
}
/**
* @brief Get PLL_CLK frequency
*
* @return PLL clock frequency, in MHz
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_bbpll_get_freq_mhz(void)
{
uint32_t bbpll_freq = REG_GET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SPLL_FREQ);
HAL_ASSERT(bbpll_freq == CLK_LL_PLL_96M_FREQ_MHZ);
return bbpll_freq;
}
/**
* @brief Set BBPLL frequency from XTAL source (Digital part)
*
* @param pll_freq_mhz PLL frequency, in MHz
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_set_freq_mhz(uint32_t pll_freq_mhz)
{
(void)pll_freq_mhz;
// ESP32H4 bbpll frequency cannot be changed, fixed to 96MHz
// Do nothing
}
/**
* @brief Set BBPLL frequency from XTAL source (Analog part)
*
* @param pll_freq_mhz PLL frequency, in MHz
* @param xtal_freq_mhz XTAL frequency, in MHz
*/
static inline __attribute__((always_inline)) void clk_ll_bbpll_set_config(uint32_t pll_freq_mhz, uint32_t xtal_freq_mhz)
{
(void)xtal_freq_mhz;
switch (pll_freq_mhz) {
case CLK_LL_PLL_96M_FREQ_MHZ: // PLL_96M
/* set up PLL by analog control registers */
REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_REF_DIV, 0);
REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DIV, 1); // I2C_BBPLL_OC_DIV_5_0
break;
default:
break;
}
REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DHREF_SEL, 3);
REGI2C_WRITE_MASK(I2C_BBPLL, I2C_BBPLL_OC_DLREF_SEL, 1);
}
/**
* @brief Select the clock source for CPU_CLK
*
* @param in_sel One of the clock sources in soc_cpu_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_cpu_set_src(soc_cpu_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_CPU_CLK_SRC_XTAL:
REG_SET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SOC_CLK_SEL, 0);
break;
case SOC_CPU_CLK_SRC_PLL:
REG_SET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SOC_CLK_SEL, 1);
break;
case SOC_CPU_CLK_SRC_RC_FAST:
REG_SET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SOC_CLK_SEL, 2);
break;
case SOC_CPU_CLK_SRC_XTAL_D2:
REG_SET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SOC_CLK_SEL, 3);
break;
default:
// Unsupported CPU_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for CPU_CLK
*
* @return Currently selected clock source (one of soc_cpu_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_cpu_clk_src_t clk_ll_cpu_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(SYSTEM_SYSCLK_CONF_REG, SYSTEM_SOC_CLK_SEL);
switch (clk_sel) {
case 0:
return SOC_CPU_CLK_SRC_XTAL;
case 1:
return SOC_CPU_CLK_SRC_PLL;
case 2:
return SOC_CPU_CLK_SRC_RC_FAST;
case 3:
return SOC_CPU_CLK_SRC_XTAL_D2;
default:
return SOC_CPU_CLK_SRC_INVALID;
}
}
/**
* @brief Set CPU_CLK divider. freq of CPU_CLK = freq of CPU clock source / divider
*
* @param divider Divider. CPU_DIV_NUM = divider - 1.
*/
static inline __attribute__((always_inline)) void clk_ll_cpu_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
REG_SET_FIELD(SYSTEM_CPUCLK_CONF_REG, SYSTEM_CPU_DIV_NUM, divider - 1);
}
/**
* @brief Get CPU_CLK divider
*
* @return Divider. Divider = (CPU_DIV_NUM + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_cpu_get_divider(void)
{
return REG_GET_FIELD(SYSTEM_CPUCLK_CONF_REG, SYSTEM_CPU_DIV_NUM) + 1;
}
/**
* @brief Set AHB_CLK divider. freq of AHB_CLK = freq of CPU_CLK / divider
*
* @param divider Divider. AHB_DIV_NUM = divider - 1.
*/
static inline __attribute__((always_inline)) void clk_ll_ahb_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
REG_SET_FIELD(SYSTEM_BUSCLK_CONF_REG, SYSTEM_AHB_DIV_NUM, divider - 1);
}
/**
* @brief Get AHB_CLK divider
*
* @return Divider. Divider = (AHB_DIV_NUM + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_ahb_get_divider(void)
{
return REG_GET_FIELD(SYSTEM_BUSCLK_CONF_REG, SYSTEM_AHB_DIV_NUM) + 1;
}
/**
* @brief Set APB_CLK divider. freq of APB_CLK = freq of AHB_CLK / divider
*
* @param divider Divider. APB_DIV_NUM = divider - 1.
*/
static inline __attribute__((always_inline)) void clk_ll_apb_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
REG_SET_FIELD(SYSTEM_BUSCLK_CONF_REG, SYSTEM_APB_DIV_NUM, divider - 1);
}
/**
* @brief Get APB_CLK divider
*
* @return Divider. Divider = (APB_DIV_NUM + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_apb_get_divider(void)
{
return REG_GET_FIELD(SYSTEM_BUSCLK_CONF_REG, SYSTEM_APB_DIV_NUM) + 1;
}
/**
* @brief Select the clock source for RTC_SLOW_CLK
*
* @param in_sel One of the clock sources in soc_rtc_slow_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_slow_set_src(soc_rtc_slow_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_RTC_SLOW_CLK_SRC_RC_SLOW:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 0);
break;
case SOC_RTC_SLOW_CLK_SRC_XTAL32K:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 1);
break;
case SOC_RTC_SLOW_CLK_SRC_RC32K:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL, 2);
break;
default:
// Unsupported RTC_SLOW_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for RTC_SLOW_CLK
*
* @return Currently selected clock source (one of soc_rtc_slow_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_rtc_slow_clk_src_t clk_ll_rtc_slow_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_ANA_CLK_RTC_SEL);
switch (clk_sel) {
case 0:
return SOC_RTC_SLOW_CLK_SRC_RC_SLOW;
case 1:
return SOC_RTC_SLOW_CLK_SRC_XTAL32K;
case 2:
return SOC_RTC_SLOW_CLK_SRC_RC32K;
default:
// Invalid ANA_CLK_RTC_SEL value
return SOC_RTC_SLOW_CLK_SRC_INVALID;
}
}
/**
* @brief Select the clock source for RTC_FAST_CLK
*
* @param in_sel One of the clock sources in soc_rtc_fast_clk_src_t
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_fast_set_src(soc_rtc_fast_clk_src_t in_sel)
{
switch (in_sel) {
case SOC_RTC_FAST_CLK_SRC_XTAL_D2:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL, 0);
break;
case SOC_RTC_FAST_CLK_SRC_RC_FAST:
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL, 1);
break;
default:
// Unsupported RTC_FAST_CLK mux input sel
abort();
}
}
/**
* @brief Get the clock source for RTC_FAST_CLK
*
* @return Currently selected clock source (one of soc_rtc_fast_clk_src_t values)
*/
static inline __attribute__((always_inline)) soc_rtc_fast_clk_src_t clk_ll_rtc_fast_get_src(void)
{
uint32_t clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL);
switch (clk_sel) {
case 0:
return SOC_RTC_FAST_CLK_SRC_XTAL_D2;
case 1:
return SOC_RTC_FAST_CLK_SRC_RC_FAST;
default:
return SOC_RTC_FAST_CLK_SRC_INVALID;
}
}
/**
* @brief Set RC_FAST_CLK divider. The output from the divider is passed into rtc_fast_clk MUX.
*
* @param divider Divider of RC_FAST_CLK. Usually this divider is set to 1 (reg. value is 0) in bootloader stage.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_fast_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
CLEAR_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL_VLD);
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL, divider - 1);
SET_PERI_REG_MASK(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL_VLD);
}
/**
* @brief Get RC_FAST_CLK divider
*
* @return Divider. Divider = (CK8M_DIV_SEL + 1).
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_rc_fast_get_divider(void)
{
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_CK8M_DIV_SEL) + 1;
}
/**
* @brief Set RC_SLOW_CLK divider
*
* @param divider Divider of RC_SLOW_CLK. Usually this divider is set to 1 (reg. value is 0) in bootloader stage.
*/
static inline __attribute__((always_inline)) void clk_ll_rc_slow_set_divider(uint32_t divider)
{
HAL_ASSERT(divider > 0);
CLEAR_PERI_REG_MASK(RTC_CNTL_SLOW_CLK_CONF_REG, RTC_CNTL_ANA_CLK_DIV_VLD);
REG_SET_FIELD(RTC_CNTL_SLOW_CLK_CONF_REG, RTC_CNTL_ANA_CLK_DIV, divider - 1);
SET_PERI_REG_MASK(RTC_CNTL_SLOW_CLK_CONF_REG, RTC_CNTL_ANA_CLK_DIV_VLD);
}
/************************* RTC STORAGE REGISTER STORE/LOAD **************************/
/**
* @brief Store XTAL_CLK frequency in RTC storage register
*
* Value of RTC_XTAL_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @param xtal_freq_mhz XTAL frequency, in MHz. The frequency must necessarily be even,
* otherwise there will be a conflict with the low bit, which is used to disable logs
* in the ROM code.
*/
static inline __attribute__((always_inline)) void clk_ll_xtal_store_freq_mhz(uint32_t xtal_freq_mhz)
{
// Read the status of whether disabling logging from ROM code
uint32_t reg = READ_PERI_REG(RTC_XTAL_FREQ_REG) & RTC_DISABLE_ROM_LOG;
// If so, need to write back this setting
if (reg == RTC_DISABLE_ROM_LOG) {
xtal_freq_mhz |= 1;
}
WRITE_PERI_REG(RTC_XTAL_FREQ_REG, (xtal_freq_mhz & UINT16_MAX) | ((xtal_freq_mhz & UINT16_MAX) << 16));
}
/**
* @brief Load XTAL_CLK frequency from RTC storage register
*
* Value of RTC_XTAL_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @return XTAL frequency, in MHz. Returns 0 if value in reg is invalid.
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_xtal_load_freq_mhz(void)
{
// ESP32H4 has a fixed crystal frequency (32MHz), but we will still read from the RTC storage register
uint32_t xtal_freq_reg = READ_PERI_REG(RTC_XTAL_FREQ_REG);
if ((xtal_freq_reg & ~RTC_DISABLE_ROM_LOG & UINT16_MAX) != RTC_XTAL_FREQ_32M) {
return 0;
}
return (uint32_t)RTC_XTAL_FREQ_32M;
}
/**
* @brief Store APB_CLK frequency in RTC storage register
*
* Value of RTC_APB_FREQ_REG is stored as two copies in lower and upper 16-bit
* halves. These are the routines to work with that representation.
*
* @param apb_freq_hz APB frequency, in Hz
*/
static inline __attribute__((always_inline)) void clk_ll_apb_store_freq_hz(uint32_t apb_freq_hz)
{
uint32_t val = apb_freq_hz >> 12;
WRITE_PERI_REG(RTC_APB_FREQ_REG, (val & UINT16_MAX) | ((val & UINT16_MAX) << 16));
}
/**
* @brief Store RTC_SLOW_CLK calibration value in RTC storage register
*
* Value of RTC_SLOW_CLK_CAL_REG has to be in the same format as returned by rtc_clk_cal (microseconds,
* in Q13.19 fixed-point format).
*
* @param cal_value The calibration value of slow clock period in microseconds, in Q13.19 fixed point format
*/
static inline __attribute__((always_inline)) void clk_ll_rtc_slow_store_cal(uint32_t cal_value)
{
REG_WRITE(RTC_SLOW_CLK_CAL_REG, cal_value);
}
/**
* @brief Load the calibration value of RTC_SLOW_CLK frequency from RTC storage register
*
* This value gets updated (i.e. rtc slow clock gets calibrated) every time RTC_SLOW_CLK source switches
*
* @return The calibration value of slow clock period in microseconds, in Q13.19 fixed point format
*/
static inline __attribute__((always_inline)) uint32_t clk_ll_rtc_slow_load_cal(void)
{
return REG_READ(RTC_SLOW_CLK_CAL_REG);
}
#ifdef __cplusplus
}
#endif

56
components/hal/esp32h4/include/hal/dedic_gpio_cpu_ll.h
View File

@ -1,56 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include "riscv/csr.h"
/*fast gpio*/
#define CSR_GPIO_OEN_USER 0x803
#define CSR_GPIO_IN_USER 0x804
#define CSR_GPIO_OUT_USER 0x805
#ifdef __cplusplus
extern "C" {
#endif
__attribute__((always_inline))
static inline void dedic_gpio_cpu_ll_enable_output(uint32_t mask)
{
RV_WRITE_CSR(CSR_GPIO_OEN_USER, mask);
}
__attribute__((always_inline))
static inline void dedic_gpio_cpu_ll_write_all(uint32_t value)
{
RV_WRITE_CSR(CSR_GPIO_OUT_USER, value);
}
__attribute__((always_inline))
static inline uint32_t dedic_gpio_cpu_ll_read_in(void)
{
uint32_t value = RV_READ_CSR(CSR_GPIO_IN_USER);
return value;
}
__attribute__((always_inline))
static inline uint32_t dedic_gpio_cpu_ll_read_out(void)
{
uint32_t value = RV_READ_CSR(CSR_GPIO_OUT_USER);
return value;
}
__attribute__((always_inline))
static inline void dedic_gpio_cpu_ll_write_mask(uint32_t mask, uint32_t value)
{
RV_SET_CSR(CSR_GPIO_OUT_USER, mask & value);
RV_CLEAR_CSR(CSR_GPIO_OUT_USER, mask & ~(value));
}
#ifdef __cplusplus
}
#endif

167
components/hal/esp32h4/include/hal/ds_ll.h
View File

@ -1,167 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use it in application code.
******************************************************************************/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "soc/hwcrypto_reg.h"
#include "soc/soc_caps.h"
#ifdef __cplusplus
extern "C" {
#endif
static inline void ds_ll_start(void)
{
REG_WRITE(DS_SET_START_REG, 1);
}
/**
* @brief Wait until DS peripheral has finished any outstanding operation.
*/
static inline bool ds_ll_busy(void)
{
return (REG_READ(DS_QUERY_BUSY_REG) > 0) ? true : false;
}
/**
* @brief Busy wait until the hardware is ready.
*/
static inline void ds_ll_wait_busy(void)
{
while (ds_ll_busy());
}
/**
* @brief In case of a key error, check what caused it.
*/
static inline ds_key_check_t ds_ll_key_error_source(void)
{
uint32_t key_error = REG_READ(DS_QUERY_KEY_WRONG_REG);
if (key_error == 0) {
return DS_NO_KEY_INPUT;
} else {
return DS_OTHER_WRONG;
}
}
/**
* @brief Write the initialization vector to the corresponding register field.
*/
static inline void ds_ll_configure_iv(const uint32_t *iv)
{
for (size_t i = 0; i < (SOC_DS_KEY_PARAM_MD_IV_LENGTH / sizeof(uint32_t)); i++) {
REG_WRITE(DS_IV_BASE + (i * 4) , iv[i]);
}
}
/**
* @brief Write the message which should be signed.
*
* @param msg Pointer to the message.
* @param size Length of msg in bytes. It is the RSA signature length in bytes.
*/
static inline void ds_ll_write_message(const uint8_t *msg, size_t size)
{
memcpy((uint8_t*) DS_X_BASE, msg, size);
asm volatile ("fence");
}
/**
* @brief Write the encrypted private key parameters.
*/
static inline void ds_ll_write_private_key_params(const uint8_t *encrypted_key_params)
{
/* Note: as the internal peripheral still has RSA 4096 structure,
but C is encrypted based on the actual max RSA length (ETS_DS_MAX_BITS), need to fragment it
when copying to hardware...
(note if ETS_DS_MAX_BITS == 4096, this should be the same as copying data->c to hardware in one fragment)
*/
typedef struct { uint32_t addr; size_t len; } frag_t;
const frag_t frags[] = {
{DS_C_Y_BASE, SOC_DS_SIGNATURE_MAX_BIT_LEN / 8},
{DS_C_M_BASE, SOC_DS_SIGNATURE_MAX_BIT_LEN / 8},
{DS_C_RB_BASE, SOC_DS_SIGNATURE_MAX_BIT_LEN / 8},
{DS_C_BOX_BASE, DS_IV_BASE - DS_C_BOX_BASE},
};
const size_t NUM_FRAGS = sizeof(frags)/sizeof(frag_t);
const uint8_t *from = encrypted_key_params;
for (int i = 0; i < NUM_FRAGS; i++) {
memcpy((uint8_t *)frags[i].addr, from, frags[i].len);
asm volatile ("fence");
from += frags[i].len;
}
}
/**
* @brief Begin signing procedure.
*/
static inline void ds_ll_start_sign(void)
{
REG_WRITE(DS_SET_ME_REG, 1);
}
/**
* @brief check the calculated signature.
*
* @return
* - DS_SIGNATURE_OK if no issue is detected with the signature.
* - DS_SIGNATURE_PADDING_FAIL if the padding of the private key parameters is wrong.
* - DS_SIGNATURE_MD_FAIL if the message digest check failed. This means that the message digest calculated using
* the private key parameters fails, i.e., the integrity of the private key parameters is not protected.
* - DS_SIGNATURE_PADDING_AND_MD_FAIL if both padding and message digest check fail.
*/
static inline ds_signature_check_t ds_ll_check_signature(void)
{
uint32_t result = REG_READ(DS_QUERY_CHECK_REG);
switch(result) {
case 0:
return DS_SIGNATURE_OK;
case 1:
return DS_SIGNATURE_MD_FAIL;
case 2:
return DS_SIGNATURE_PADDING_FAIL;
default:
return DS_SIGNATURE_PADDING_AND_MD_FAIL;
}
}
/**
* @brief Read the signature from the hardware.
*
* @param result The signature result.
* @param size Length of signature result in bytes. It is the RSA signature length in bytes.
*/
static inline void ds_ll_read_result(uint8_t *result, size_t size)
{
memcpy(result, (uint8_t*) DS_Z_BASE, size);
asm volatile ("fence");
}
/**
* @brief Exit the signature operation.
*
* @note This does not deactivate the module. Corresponding clock/reset bits have to be triggered for deactivation.
*/
static inline void ds_ll_finish(void)
{
REG_WRITE(DS_SET_FINISH_REG, 1);
ds_ll_wait_busy();
}
#ifdef __cplusplus
}
#endif

147
components/hal/esp32h4/include/hal/ecc_ll.h
View File

@ -1,147 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include <string.h>
#include "hal/assert.h"
#include "rev2/soc/ecc_mult_reg.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ECC_PARAM_PX = 0x0,
ECC_PARAM_PY,
ECC_PARAM_K,
} ecc_ll_param_t;
static inline void ecc_ll_enable_interrupt(void)
{
REG_SET_FIELD(ECC_MULT_INT_ENA_REG, ECC_MULT_CALC_DONE_INT_ENA, 1);
}
static inline void ecc_ll_disable_interrupt(void)
{
REG_SET_FIELD(ECC_MULT_INT_ENA_REG, ECC_MULT_CALC_DONE_INT_ENA, 0);
}
static inline void ecc_ll_clear_interrupt(void)
{
REG_SET_FIELD(ECC_MULT_INT_CLR_REG, ECC_MULT_CALC_DONE_INT_CLR, 1);
}
static inline void ecc_ll_set_mode(ecc_mode_t mode)
{
switch(mode) {
case ECC_MODE_POINT_MUL:
REG_SET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_WORK_MODE, 0);
break;
case ECC_MODE_INVERSE_MUL:
REG_SET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_WORK_MODE, 1);
break;
case ECC_MODE_VERIFY:
REG_SET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_WORK_MODE, 2);
break;
case ECC_MODE_VERIFY_THEN_POINT_MUL:
REG_SET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_WORK_MODE, 3);
break;
default:
HAL_ASSERT(false && "Unsupported mode");
break;
}
}
static inline void ecc_ll_set_curve(ecc_curve_t curve)
{
switch(curve) {
case ECC_CURVE_SECP256R1:
REG_SET_BIT(ECC_MULT_CONF_REG, ECC_MULT_KEY_LENGTH);
break;
case ECC_CURVE_SECP192R1:
REG_CLR_BIT(ECC_MULT_CONF_REG, ECC_MULT_KEY_LENGTH);
break;
default:
HAL_ASSERT(false && "Unsupported curve");
return;
}
}
static inline void ecc_ll_write_param(ecc_ll_param_t param, const uint8_t *buf, uint16_t len)
{
uint32_t reg;
uint32_t word;
switch (param) {
case ECC_PARAM_PX:
reg = ECC_MULT_PX_1_REG;
break;
case ECC_PARAM_PY:
reg = ECC_MULT_PY_1_REG;
break;
case ECC_PARAM_K:
reg = ECC_MULT_K_1_REG;
break;
default:
HAL_ASSERT(false && "Invalid parameter");
return;
}
for (int i = 0; i < len; i += 4) {
memcpy(&word, buf + i, 4);
REG_WRITE(reg + i, word);
}
}
static inline void ecc_ll_start_calc(void)
{
REG_SET_BIT(ECC_MULT_CONF_REG, ECC_MULT_START);
}
static inline int ecc_ll_is_calc_finished(void)
{
return REG_GET_FIELD(ECC_MULT_INT_RAW_REG, ECC_MULT_CALC_DONE_INT_RAW);
}
static inline ecc_mode_t ecc_ll_get_mode(void)
{
return REG_GET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_WORK_MODE);
}
static inline int ecc_ll_get_verification_result(void)
{
return REG_GET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_VERIFICATION_RESULT);
}
static inline ecc_curve_t ecc_ll_get_curve(void)
{
return REG_GET_FIELD(ECC_MULT_CONF_REG, ECC_MULT_KEY_LENGTH);
}
static inline void ecc_ll_read_param(ecc_ll_param_t param, uint8_t *buf, uint16_t len)
{
uint32_t reg;
switch (param) {
case ECC_PARAM_PX:
reg = ECC_MULT_PX_1_REG;
break;
case ECC_PARAM_PY:
reg = ECC_MULT_PY_1_REG;
break;
case ECC_PARAM_K:
reg = ECC_MULT_K_1_REG;
break;
default:
HAL_ASSERT(false && "Invalid parameter");
return;
}
memcpy(buf, (void *)reg, len);
}
#ifdef __cplusplus
}
#endif

63
components/hal/esp32h4/include/hal/efuse_hal.h
View File

@ -1,63 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/soc_caps.h"
#include "hal/efuse_ll.h"
#include_next "hal/efuse_hal.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief set eFuse timings
*
* @param apb_freq_hz APB frequency in Hz
*/
void efuse_hal_set_timing(uint32_t apb_freq_hz);
/**
* @brief trigger eFuse read operation
*/
void efuse_hal_read(void);
/**
* @brief clear registers for programming eFuses
*/
void efuse_hal_clear_program_registers(void);
/**
* @brief burn eFuses written in programming registers (one block at once)
*
* @param block block number
*/
void efuse_hal_program(uint32_t block);
/**
* @brief Calculate Reed-Solomon Encoding values for a block of efuse data.
*
* @param data Pointer to data buffer (length 32 bytes)
* @param rs_values Pointer to write encoded data to (length 12 bytes)
*/
void efuse_hal_rs_calculate(const void *data, void *rs_values);
/**
* @brief Checks coding error in a block
*
* @param block Index of efuse block
*
* @return True - block has an error.
* False - no error.
*/
bool efuse_hal_is_coding_error_in_block(unsigned block);
#ifdef __cplusplus
}
#endif

127
components/hal/esp32h4/include/hal/efuse_ll.h
View File

@ -1,127 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/efuse_periph.h"
#include "hal/assert.h"
#include "esp32h4/rom/efuse.h"
#ifdef __cplusplus
extern "C" {
#endif
// Always inline these functions even no gcc optimization is applied.
/******************* eFuse fields *************************/
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_flash_crypt_cnt(void)
{
return EFUSE.rd_repeat_data1.spi_boot_crypt_cnt;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_wdt_delay_sel(void)
{
return EFUSE.rd_repeat_data1.wdt_delay_sel;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_mac0(void)
{
return EFUSE.rd_mac_spi_sys_0.mac_0;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_mac1(void)
{
return EFUSE.rd_mac_spi_sys_1.mac_1;
}
__attribute__((always_inline)) static inline bool efuse_ll_get_secure_boot_v2_en(void)
{
return EFUSE.rd_repeat_data2.secure_boot_en;
}
// use efuse_hal_get_major_chip_version() to get major chip version
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_chip_wafer_version_major(void)
{
return EFUSE.rd_mac_spi_sys_3.wafer_version;
}
// use efuse_hal_get_minor_chip_version() to get minor chip version
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_chip_wafer_version_minor(void)
{
return 0;
}
__attribute__((always_inline)) static inline bool efuse_ll_get_disable_wafer_version_major(void)
{
return 0;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_blk_version_major(void)
{
return 0;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_blk_version_minor(void)
{
return 0;
}
__attribute__((always_inline)) static inline bool efuse_ll_get_disable_blk_version_major(void)
{
return 0;
}
__attribute__((always_inline)) static inline uint32_t efuse_ll_get_chip_ver_pkg(void)
{
return EFUSE.rd_mac_spi_sys_3.pkg_version;
}
/******************* eFuse control functions *************************/
__attribute__((always_inline)) static inline bool efuse_ll_get_read_cmd(void)
{
return EFUSE.cmd.read_cmd;
}
__attribute__((always_inline)) static inline bool efuse_ll_get_pgm_cmd(void)
{
return EFUSE.cmd.pgm_cmd;
}
__attribute__((always_inline)) static inline void efuse_ll_set_read_cmd(void)
{
EFUSE.cmd.read_cmd = 1;
}
__attribute__((always_inline)) static inline void efuse_ll_set_pgm_cmd(uint32_t block)
{
HAL_ASSERT(block < ETS_EFUSE_BLOCK_MAX);
EFUSE.cmd.val = ((block << EFUSE_BLK_NUM_S) & EFUSE_BLK_NUM_M) | EFUSE_PGM_CMD;
}
__attribute__((always_inline)) static inline void efuse_ll_set_conf_read_op_code(void)
{
EFUSE.conf.op_code = EFUSE_READ_OP_CODE;
}
__attribute__((always_inline)) static inline void efuse_ll_set_conf_write_op_code(void)
{
EFUSE.conf.op_code = EFUSE_WRITE_OP_CODE;
}
__attribute__((always_inline)) static inline void efuse_ll_set_pwr_off_num(uint16_t value)
{
EFUSE.wr_tim_conf2.pwr_off_num = value;
}
/******************* eFuse control functions *************************/
#ifdef __cplusplus
}
#endif

481
components/hal/esp32h4/include/hal/gdma_ll.h
View File

@ -1,481 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stddef.h> /* Required for NULL constant */
#include <stdint.h>
#include <stdbool.h>
#include "hal/gdma_types.h"
#include "soc/gdma_struct.h"
#include "soc/gdma_reg.h"
#ifdef __cplusplus
extern "C" {
#endif
#define GDMA_LL_GET_HW(id) (((id) == 0) ? (&GDMA) : NULL)
#define GDMA_LL_CHANNEL_MAX_PRIORITY 5 // supported priority levels: [0,5]
#define GDMA_LL_RX_EVENT_MASK (0x06A7)
#define GDMA_LL_TX_EVENT_MASK (0x1958)
// any "valid" peripheral ID can be used for M2M mode
#define GDMA_LL_M2M_FREE_PERIPH_ID_MASK (0x1CD)
#define GDMA_LL_INVALID_PERIPH_ID (0x3F)
#define GDMA_LL_EVENT_TX_FIFO_UDF (1<<12)
#define GDMA_LL_EVENT_TX_FIFO_OVF (1<<11)
#define GDMA_LL_EVENT_RX_FIFO_UDF (1<<10)
#define GDMA_LL_EVENT_RX_FIFO_OVF (1<<9)
#define GDMA_LL_EVENT_TX_TOTAL_EOF (1<<8)
#define GDMA_LL_EVENT_RX_DESC_EMPTY (1<<7)
#define GDMA_LL_EVENT_TX_DESC_ERROR (1<<6)
#define GDMA_LL_EVENT_RX_DESC_ERROR (1<<5)
#define GDMA_LL_EVENT_TX_EOF (1<<4)
#define GDMA_LL_EVENT_TX_DONE (1<<3)
#define GDMA_LL_EVENT_RX_ERR_EOF (1<<2)
#define GDMA_LL_EVENT_RX_SUC_EOF (1<<1)
#define GDMA_LL_EVENT_RX_DONE (1<<0)
///////////////////////////////////// Common /////////////////////////////////////////
/**
* @brief Enable DMA clock gating
*/
static inline void gdma_ll_enable_clock(gdma_dev_t *dev, bool enable)
{
dev->misc_conf.clk_en = enable;
}
///////////////////////////////////// RX /////////////////////////////////////////
/**
* @brief Get DMA RX channel interrupt status word
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_rx_get_interrupt_status(gdma_dev_t *dev, uint32_t channel)
{
return dev->intr[channel].st.val & GDMA_LL_RX_EVENT_MASK;
}
/**
* @brief Enable DMA RX channel interrupt
*/
static inline void gdma_ll_rx_enable_interrupt(gdma_dev_t *dev, uint32_t channel, uint32_t mask, bool enable)
{
if (enable) {
dev->intr[channel].ena.val |= (mask & GDMA_LL_RX_EVENT_MASK);
} else {
dev->intr[channel].ena.val &= ~(mask & GDMA_LL_RX_EVENT_MASK);
}
}
/**
* @brief Clear DMA RX channel interrupt
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_clear_interrupt_status(gdma_dev_t *dev, uint32_t channel, uint32_t mask)
{
dev->intr[channel].clr.val = (mask & GDMA_LL_RX_EVENT_MASK);
}
/**
* @brief Get DMA RX channel interrupt status register address
*/
static inline volatile void *gdma_ll_rx_get_interrupt_status_reg(gdma_dev_t *dev, uint32_t channel)
{
return (volatile void *)(&dev->intr[channel].st);
}
/**
* @brief Enable DMA RX channel to check the owner bit in the descriptor, disabled by default
*/
static inline void gdma_ll_rx_enable_owner_check(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].in.in_conf1.in_check_owner = enable;
}
/**
* @brief Enable DMA RX channel burst reading data, disabled by default
*/
static inline void gdma_ll_rx_enable_data_burst(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].in.in_conf0.in_data_burst_en = enable;
}
/**
* @brief Enable DMA RX channel burst reading descriptor link, disabled by default
*/
static inline void gdma_ll_rx_enable_descriptor_burst(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].in.in_conf0.indscr_burst_en = enable;
}
/**
* @brief Reset DMA RX channel FSM and FIFO pointer
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_reset_channel(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_conf0.in_rst = 1;
dev->channel[channel].in.in_conf0.in_rst = 0;
}
/**
* @brief Check if DMA RX FIFO is full
* @param fifo_level only supports level 1
*/
static inline bool gdma_ll_rx_is_fifo_full(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].in.infifo_status.val & 0x01;
}
/**
* @brief Check if DMA RX FIFO is empty
* @param fifo_level only supports level 1
*/
static inline bool gdma_ll_rx_is_fifo_empty(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].in.infifo_status.val & 0x02;
}
/**
* @brief Get number of bytes in RX FIFO
* @param fifo_level only supports level 1
*/
static inline uint32_t gdma_ll_rx_get_fifo_bytes(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].in.infifo_status.infifo_cnt;
}
/**
* @brief Pop data from DMA RX FIFO
*/
static inline uint32_t gdma_ll_rx_pop_data(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_pop.infifo_pop = 1;
return dev->channel[channel].in.in_pop.infifo_rdata;
}
/**
* @brief Set the descriptor link base address for RX channel
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_set_desc_addr(gdma_dev_t *dev, uint32_t channel, uint32_t addr)
{
dev->channel[channel].in.in_link.addr = addr;
}
/**
* @brief Start dealing with RX descriptors
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_start(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_link.start = 1;
}
/**
* @brief Stop dealing with RX descriptors
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_stop(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_link.stop = 1;
}
/**
* @brief Restart a new inlink right after the last descriptor
*/
__attribute__((always_inline))
static inline void gdma_ll_rx_restart(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_link.restart = 1;
}
/**
* @brief Enable DMA RX to return the address of current descriptor when receives error
*/
static inline void gdma_ll_rx_enable_auto_return(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].in.in_link.auto_ret = enable;
}
/**
* @brief Check if DMA RX FSM is in IDLE state
*/
static inline bool gdma_ll_rx_is_fsm_idle(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].in.in_link.park;
}
/**
* @brief Get RX success EOF descriptor's address
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_rx_get_success_eof_desc_addr(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].in.in_suc_eof_des_addr;
}
/**
* @brief Get RX error EOF descriptor's address
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_rx_get_error_eof_desc_addr(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].in.in_err_eof_des_addr;
}
/**
* @brief Get current RX descriptor's address
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_rx_get_current_desc_addr(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].in.in_dscr;
}
/**
* @brief Set priority for DMA RX channel
*/
static inline void gdma_ll_rx_set_priority(gdma_dev_t *dev, uint32_t channel, uint32_t prio)
{
dev->channel[channel].in.in_pri.rx_pri = prio;
}
/**
* @brief Connect DMA RX channel to a given peripheral
*/
static inline void gdma_ll_rx_connect_to_periph(gdma_dev_t *dev, uint32_t channel, gdma_trigger_peripheral_t periph, int periph_id)
{
dev->channel[channel].in.in_peri_sel.sel = periph_id;
dev->channel[channel].in.in_conf0.mem_trans_en = (periph == GDMA_TRIG_PERIPH_M2M);
}
/**
* @brief Disconnect DMA RX channel from peripheral
*/
static inline void gdma_ll_rx_disconnect_from_periph(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].in.in_peri_sel.sel = GDMA_LL_INVALID_PERIPH_ID;
dev->channel[channel].in.in_conf0.mem_trans_en = false;
}
///////////////////////////////////// TX /////////////////////////////////////////
/**
* @brief Get DMA TX channel interrupt status word
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_tx_get_interrupt_status(gdma_dev_t *dev, uint32_t channel)
{
return dev->intr[channel].st.val & GDMA_LL_TX_EVENT_MASK;
}
/**
* @brief Enable DMA TX channel interrupt
*/
static inline void gdma_ll_tx_enable_interrupt(gdma_dev_t *dev, uint32_t channel, uint32_t mask, bool enable)
{
if (enable) {
dev->intr[channel].ena.val |= (mask & GDMA_LL_TX_EVENT_MASK);
} else {
dev->intr[channel].ena.val &= ~(mask & GDMA_LL_TX_EVENT_MASK);
}
}
/**
* @brief Clear DMA TX channel interrupt
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_clear_interrupt_status(gdma_dev_t *dev, uint32_t channel, uint32_t mask)
{
dev->intr[channel].clr.val = (mask & GDMA_LL_TX_EVENT_MASK);
}
/**
* @brief Get DMA TX channel interrupt status register address
*/
static inline volatile void *gdma_ll_tx_get_interrupt_status_reg(gdma_dev_t *dev, uint32_t channel)
{
return (volatile void *)(&dev->intr[channel].st);
}
/**
* @brief Enable DMA TX channel to check the owner bit in the descriptor, disabled by default
*/
static inline void gdma_ll_tx_enable_owner_check(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].out.out_conf1.out_check_owner = enable;
}
/**
* @brief Enable DMA TX channel burst sending data, disabled by default
*/
static inline void gdma_ll_tx_enable_data_burst(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].out.out_conf0.out_data_burst_en = enable;
}
/**
* @brief Enable DMA TX channel burst reading descriptor link, disabled by default
*/
static inline void gdma_ll_tx_enable_descriptor_burst(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].out.out_conf0.outdscr_burst_en = enable;
}
/**
* @brief Set TX channel EOF mode
*/
static inline void gdma_ll_tx_set_eof_mode(gdma_dev_t *dev, uint32_t channel, uint32_t mode)
{
dev->channel[channel].out.out_conf0.out_eof_mode = mode;
}
/**
* @brief Enable DMA TX channel automatic write results back to descriptor after all data has been sent out, disabled by default
*/
static inline void gdma_ll_tx_enable_auto_write_back(gdma_dev_t *dev, uint32_t channel, bool enable)
{
dev->channel[channel].out.out_conf0.out_auto_wrback = enable;
}
/**
* @brief Reset DMA TX channel FSM and FIFO pointer
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_reset_channel(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].out.out_conf0.out_rst = 1;
dev->channel[channel].out.out_conf0.out_rst = 0;
}
/**
* @brief Check if DMA TX FIFO is full
* @param fifo_level only supports level 1
*/
static inline bool gdma_ll_tx_is_fifo_full(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].out.outfifo_status.val & 0x01;
}
/**
* @brief Check if DMA TX FIFO is empty
* @param fifo_level only supports level 1
*/
static inline bool gdma_ll_tx_is_fifo_empty(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].out.outfifo_status.val & 0x02;
}
/**
* @brief Get number of bytes in TX FIFO
* @param fifo_level only supports level 1
*/
static inline uint32_t gdma_ll_tx_get_fifo_bytes(gdma_dev_t *dev, uint32_t channel, uint32_t fifo_level)
{
return dev->channel[channel].out.outfifo_status.outfifo_cnt;
}
/**
* @brief Push data into DMA TX FIFO
*/
static inline void gdma_ll_tx_push_data(gdma_dev_t *dev, uint32_t channel, uint32_t data)
{
dev->channel[channel].out.out_push.outfifo_wdata = data;
dev->channel[channel].out.out_push.outfifo_push = 1;
}
/**
* @brief Set the descriptor link base address for TX channel
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_set_desc_addr(gdma_dev_t *dev, uint32_t channel, uint32_t addr)
{
dev->channel[channel].out.out_link.addr = addr;
}
/**
* @brief Start dealing with TX descriptors
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_start(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].out.out_link.start = 1;
}
/**
* @brief Stop dealing with TX descriptors
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_stop(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].out.out_link.stop = 1;
}
/**
* @brief Restart a new outlink right after the last descriptor
*/
__attribute__((always_inline))
static inline void gdma_ll_tx_restart(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].out.out_link.restart = 1;
}
/**
* @brief Check if DMA TX FSM is in IDLE state
*/
static inline bool gdma_ll_tx_is_fsm_idle(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].out.out_link.park;
}
/**
* @brief Get TX EOF descriptor's address
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_tx_get_eof_desc_addr(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].out.out_eof_des_addr;
}
/**
* @brief Get current TX descriptor's address
*/
__attribute__((always_inline))
static inline uint32_t gdma_ll_tx_get_current_desc_addr(gdma_dev_t *dev, uint32_t channel)
{
return dev->channel[channel].out.out_dscr;
}
/**
* @brief Set priority for DMA TX channel
*/
static inline void gdma_ll_tx_set_priority(gdma_dev_t *dev, uint32_t channel, uint32_t prio)
{
dev->channel[channel].out.out_pri.tx_pri = prio;
}
/**
* @brief Connect DMA TX channel to a given peripheral
*/
static inline void gdma_ll_tx_connect_to_periph(gdma_dev_t *dev, uint32_t channel, gdma_trigger_peripheral_t periph, int periph_id)
{
(void)periph;
dev->channel[channel].out.out_peri_sel.sel = periph_id;
}
/**
* @brief Disconnect DMA TX channel from peripheral
*/
static inline void gdma_ll_tx_disconnect_from_periph(gdma_dev_t *dev, uint32_t channel)
{
dev->channel[channel].out.out_peri_sel.sel = GDMA_LL_INVALID_PERIPH_ID;
}
#ifdef __cplusplus
}
#endif

409
components/hal/esp32h4/include/hal/gpspi_flash_ll.h
View File

@ -1,409 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The ll is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The Lowlevel layer for SPI Flash
#pragma once
#include <stdlib.h>
#include "soc/spi_periph.h"
#include "soc/spi_struct.h"
#include "hal/spi_types.h"
#include "hal/spi_flash_types.h"
#include <sys/param.h> // For MIN/MAX
#include <stdbool.h>
#include <string.h>
#include "hal/misc.h"
#ifdef __cplusplus
extern "C" {
#endif
//NOTE: These macros are changed on h4 for build. MODIFY these when bringup flash.
#define gpspi_flash_ll_get_hw(host_id) ( ((host_id)==SPI2_HOST) ? &GPSPI2 : ({abort();(spi_dev_t*)0;}) )
#define gpspi_flash_ll_hw_get_id(dev) ( ((dev) == (void*)&GPSPI2) ? SPI2_HOST : -1 )
typedef typeof(GPSPI2.clock.val) gpspi_flash_ll_clock_reg_t;
#define GPSPI_FLASH_LL_PERIPHERAL_FREQUENCY_MHZ (48)
/*------------------------------------------------------------------------------
* Control
*----------------------------------------------------------------------------*/
/**
* Reset peripheral registers before configuration and starting control
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void gpspi_flash_ll_reset(spi_dev_t *dev)
{
dev->user.val = 0;
dev->ctrl.val = 0;
dev->clk_gate.clk_en = 1;
dev->clk_gate.mst_clk_active = 1;
dev->clk_gate.mst_clk_sel = 1;
dev->dma_conf.val = 0;
dev->dma_conf.tx_seg_trans_clr_en = 1;
dev->dma_conf.rx_seg_trans_clr_en = 1;
dev->dma_conf.dma_seg_trans_en = 0;
}
/**
* Check whether the previous operation is done.
*
* @param dev Beginning address of the peripheral registers.
*
* @return true if last command is done, otherwise false.
*/
static inline bool gpspi_flash_ll_cmd_is_done(const spi_dev_t *dev)
{
return (dev->cmd.usr == 0);
}
/**
* Get the read data from the buffer after ``gpspi_flash_ll_read`` is done.
*
* @param dev Beginning address of the peripheral registers.
* @param buffer Buffer to hold the output data
* @param read_len Length to get out of the buffer
*/
static inline void gpspi_flash_ll_get_buffer_data(spi_dev_t *dev, void *buffer, uint32_t read_len)
{
if (((intptr_t)buffer % 4 == 0) && (read_len % 4 == 0)) {
// If everything is word-aligned, do a faster memcpy
memcpy(buffer, (void *)dev->data_buf, read_len);
} else {
// Otherwise, slow(er) path copies word by word
int copy_len = read_len;
for (int i = 0; i < (read_len + 3) / 4; i++) {
int word_len = MIN(sizeof(uint32_t), copy_len);
uint32_t word = dev->data_buf[i];
memcpy(buffer, &word, word_len);
buffer = (void *)((intptr_t)buffer + word_len);
copy_len -= word_len;
}
}
}
/**
* Write a word to the data buffer.
*
* @param dev Beginning address of the peripheral registers.
* @param word Data to write at address 0.
*/
static inline void gpspi_flash_ll_write_word(spi_dev_t *dev, uint32_t word)
{
dev->data_buf[0] = word;
}
/**
* Set the data to be written in the data buffer.
*
* @param dev Beginning address of the peripheral registers.
* @param buffer Buffer holding the data
* @param length Length of data in bytes.
*/
static inline void gpspi_flash_ll_set_buffer_data(spi_dev_t *dev, const void *buffer, uint32_t length)
{
// Load data registers, word at a time
int num_words = (length + 3) / 4;
for (int i = 0; i < num_words; i++) {
uint32_t word = 0;
uint32_t word_len = MIN(length, sizeof(word));
memcpy(&word, buffer, word_len);
dev->data_buf[i] = word;
length -= word_len;
buffer = (void *)((intptr_t)buffer + word_len);
}
}
/**
* Trigger a user defined transaction. All phases, including command, address, dummy, and the data phases,
* should be configured before this is called.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void gpspi_flash_ll_user_start(spi_dev_t *dev)
{
dev->cmd.update = 1;
while (dev->cmd.update);
dev->cmd.usr = 1;
}
/**
* Set HD pin high when flash work at spi mode.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void gpspi_flash_ll_set_hold_pol(spi_dev_t *dev, uint32_t pol_val)
{
dev->ctrl.hold_pol = pol_val;
}
/**
* Check whether the host is idle to perform new commands.
*
* @param dev Beginning address of the peripheral registers.
*
* @return true if the host is idle, otherwise false
*/
static inline bool gpspi_flash_ll_host_idle(const spi_dev_t *dev)
{
return dev->cmd.usr == 0;
}
/**
* Set phases for user-defined transaction to read
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void gpspi_flash_ll_read_phase(spi_dev_t *dev)
{
typeof (dev->user) user = {
.usr_command = 1,
.usr_mosi = 0,
.usr_miso = 1,
.usr_addr = 1,
};
dev->user = user;
}
/*------------------------------------------------------------------------------
* Configs
*----------------------------------------------------------------------------*/
/**
* Select which pin to use for the flash
*
* @param dev Beginning address of the peripheral registers.
* @param pin Pin ID to use, 0-2. Set to other values to disable all the CS pins.
*/
static inline void gpspi_flash_ll_set_cs_pin(spi_dev_t *dev, int pin)
{
dev->misc.cs0_dis = (pin == 0) ? 0 : 1;
dev->misc.cs1_dis = (pin == 1) ? 0 : 1;
}
/**
* Set the read io mode.
*
* @param dev Beginning address of the peripheral registers.
* @param read_mode I/O mode to use in the following transactions.
*/
static inline void gpspi_flash_ll_set_read_mode(spi_dev_t *dev, esp_flash_io_mode_t read_mode)
{
typeof (dev->ctrl) ctrl = dev->ctrl;
typeof (dev->user) user = dev->user;
ctrl.val &= ~(SPI_FCMD_QUAD_M | SPI_FADDR_QUAD_M | SPI_FREAD_QUAD_M | SPI_FCMD_DUAL_M | SPI_FADDR_DUAL_M | SPI_FREAD_DUAL_M);
user.val &= ~(SPI_FWRITE_QUAD_M | SPI_FWRITE_DUAL_M);
switch (read_mode) {
case SPI_FLASH_FASTRD:
//the default option
case SPI_FLASH_SLOWRD:
break;
case SPI_FLASH_QIO:
ctrl.fread_quad = 1;
ctrl.faddr_quad = 1;
user.fwrite_quad = 1;
break;
case SPI_FLASH_QOUT:
ctrl.fread_quad = 1;
user.fwrite_quad = 1;
break;
case SPI_FLASH_DIO:
ctrl.fread_dual = 1;
ctrl.faddr_dual = 1;
user.fwrite_dual = 1;
break;
case SPI_FLASH_DOUT:
ctrl.fread_dual = 1;
user.fwrite_dual = 1;
break;
default:
abort();
}
dev->ctrl = ctrl;
dev->user = user;
}
/**
* Set clock frequency to work at.
*
* @param dev Beginning address of the peripheral registers.
* @param clock_val pointer to the clock value to set
*/
static inline void gpspi_flash_ll_set_clock(spi_dev_t *dev, gpspi_flash_ll_clock_reg_t *clock_val)
{
dev->clock.val = *clock_val;
}
/**
* Set the input length, in bits.
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of input, in bits.
*/
static inline void gpspi_flash_ll_set_miso_bitlen(spi_dev_t *dev, uint32_t bitlen)
{
dev->user.usr_miso = bitlen > 0;
if (bitlen) {
dev->ms_dlen.ms_data_bitlen = bitlen - 1;
}
}
/**
* Set the output length, in bits (not including command, address and dummy
* phases)
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of output, in bits.
*/
static inline void gpspi_flash_ll_set_mosi_bitlen(spi_dev_t *dev, uint32_t bitlen)
{
dev->user.usr_mosi = bitlen > 0;
if (bitlen) {
dev->ms_dlen.ms_data_bitlen = bitlen - 1;
}
}
/**
* Set the command.
*
* @param dev Beginning address of the peripheral registers.
* @param command Command to send
* @param bitlen Length of the command
*/
static inline void gpspi_flash_ll_set_command(spi_dev_t *dev, uint8_t command, uint32_t bitlen)
{
dev->user.usr_command = 1;
typeof(dev->user2) user2 = {
.usr_command_value = command,
.usr_command_bitlen = (bitlen - 1),
};
dev->user2 = user2;
}
/**
* Get the address length that is set in register, in bits.
*
* @param dev Beginning address of the peripheral registers.
*
*/
static inline int gpspi_flash_ll_get_addr_bitlen(spi_dev_t *dev)
{
return dev->user.usr_addr ? dev->user1.usr_addr_bitlen + 1 : 0;
}
/**
* Set the address length to send, in bits. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of the address, in bits
*/
static inline void gpspi_flash_ll_set_addr_bitlen(spi_dev_t *dev, uint32_t bitlen)
{
dev->user1.usr_addr_bitlen = (bitlen - 1);
dev->user.usr_addr = bitlen ? 1 : 0;
}
/**
* Set the address to send in user mode. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param addr Address to send
*/
static inline void gpspi_flash_ll_set_usr_address(spi_dev_t *dev, uint32_t addr, uint32_t bitlen)
{
// The blank region should be all ones
uint32_t padding_ones = (bitlen == 32? 0 : UINT32_MAX >> bitlen);
dev->addr = (addr << (32 - bitlen)) | padding_ones;
}
/**
* Set the address to send. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param addr Address to send
*/
static inline void gpspi_flash_ll_set_address(spi_dev_t *dev, uint32_t addr)
{
dev->addr = addr;
}
/**
* Set the length of dummy cycles.
*
* @param dev Beginning address of the peripheral registers.
* @param dummy_n Cycles of dummy phases
*/
static inline void gpspi_flash_ll_set_dummy(spi_dev_t *dev, uint32_t dummy_n)
{
dev->user.usr_dummy = dummy_n ? 1 : 0;
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->user1, usr_dummy_cyclelen, dummy_n - 1);
}
/**
* Set D/Q output level during dummy phase
*
* @param dev Beginning address of the peripheral registers.
* @param out_en whether to enable IO output for dummy phase
* @param out_level dummy output level
*/
static inline void gpspi_flash_ll_set_dummy_out(spi_dev_t *dev, uint32_t out_en, uint32_t out_lev)
{
dev->ctrl.dummy_out = out_en;
dev->ctrl.q_pol = out_lev;
dev->ctrl.d_pol = out_lev;
}
/**
* Set extra hold time of CS after the clocks.
*
* @param dev Beginning address of the peripheral registers.
* @param hold_n Cycles of clocks before CS is inactive
*/
static inline void gpspi_flash_ll_set_hold(spi_dev_t *dev, uint32_t hold_n)
{
dev->user1.cs_hold_time = hold_n - 1;
dev->user.cs_hold = (hold_n > 0? 1: 0);
}
static inline void gpspi_flash_ll_set_cs_setup(spi_dev_t *dev, uint32_t cs_setup_time)
{
dev->user.cs_setup = (cs_setup_time > 0 ? 1 : 0);
dev->user1.cs_setup_time = cs_setup_time - 1;
}
/**
* Calculate spi_flash clock frequency division parameters for register.
*
* @param clkdiv frequency division factor
*
* @return Register setting for the given clock division factor.
*/
static inline uint32_t gpspi_flash_ll_calculate_clock_reg(uint8_t clkdiv)
{
uint32_t div_parameter;
// See comments of `clock` in `spi_struct.h`
if (clkdiv == 1) {
div_parameter = (1 << 31);
} else {
div_parameter = ((clkdiv - 1) | (((clkdiv/2 - 1) & 0xff) << 6 ) | (((clkdiv - 1) & 0xff) << 12));
}
return div_parameter;
}
#ifdef __cplusplus
}
#endif

191
components/hal/esp32h4/include/hal/hmac_ll.h
View File

@ -1,191 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use it in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
#pragma once
#include <string.h>
#include "soc/system_reg.h"
#include "soc/hwcrypto_reg.h"
#include "hal/hmac_hal.h"
#define SHA256_BLOCK_SZ 64
#define SHA256_DIGEST_SZ 32
#define EFUSE_KEY_PURPOSE_HMAC_DOWN_JTAG 6
#define EFUSE_KEY_PURPOSE_HMAC_DOWN_DIGITAL_SIGNATURE 7
#define EFUSE_KEY_PURPOSE_HMAC_UP 8
#define EFUSE_KEY_PURPOSE_HMAC_DOWN_ALL 5
#ifdef __cplusplus
extern "C" {
#endif
/**
* Makes the peripheral ready for use, after enabling it.
*/
static inline void hmac_ll_start(void)
{
REG_WRITE(HMAC_SET_START_REG, 1);
}
/**
* @brief Determine where the HMAC output should go.
*
* The HMAC peripheral can be configured to deliver its output to the user directly, or to deliver
* the output directly to another peripheral instead, e.g. the Digital Signature peripheral.
*/
static inline void hmac_ll_config_output(hmac_hal_output_t config)
{
switch(config) {
case HMAC_OUTPUT_USER:
REG_WRITE(HMAC_SET_PARA_PURPOSE_REG, EFUSE_KEY_PURPOSE_HMAC_UP);
break;
case HMAC_OUTPUT_DS:
REG_WRITE(HMAC_SET_PARA_PURPOSE_REG, EFUSE_KEY_PURPOSE_HMAC_DOWN_DIGITAL_SIGNATURE);
break;
case HMAC_OUTPUT_JTAG_ENABLE:
REG_WRITE(HMAC_SET_PARA_PURPOSE_REG, EFUSE_KEY_PURPOSE_HMAC_DOWN_JTAG);
break;
case HMAC_OUTPUT_ALL:
REG_WRITE(HMAC_SET_PARA_PURPOSE_REG, EFUSE_KEY_PURPOSE_HMAC_DOWN_ALL);
break;
default:
; // do nothing, error will be indicated by hmac_hal_config_error()
}
}
/**
* @brief Selects which hardware key should be used.
*/
static inline void hmac_ll_config_hw_key_id(uint32_t key_id)
{
REG_WRITE(HMAC_SET_PARA_KEY_REG, key_id);
}
/**
* @brief Apply and check configuration.
*
* Afterwards, the configuration can be checked for errors with hmac_hal_config_error().
*/
static inline void hmac_ll_config_finish(void)
{
REG_WRITE(HMAC_SET_PARA_FINISH_REG, 1);
}
/**
*
* @brief Query HMAC error state after configuration actions.
*
* @return
* - 1 or greater on error
* - 0 on success
*/
static inline uint32_t hmac_ll_config_error(void)
{
return REG_READ(HMAC_QUERY_ERROR_REG);
}
/**
* Wait until the HAL is ready for the next interaction.
*/
static inline void hmac_ll_wait_idle(void)
{
uint32_t query;
do {
query = REG_READ(HMAC_QUERY_BUSY_REG);
} while(query != 0);
}
/**
* @brief Write a message block of 512 bits to the HMAC peripheral.
*/
static inline void hmac_ll_write_block_512(const uint32_t *block)
{
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < SHA256_BLOCK_SZ / REG_WIDTH; i++) {
REG_WRITE(HMAC_WDATA_BASE + (i * REG_WIDTH), block[i]);
}
REG_WRITE(HMAC_SET_MESSAGE_ONE_REG, 1);
}
/**
* @brief Read the 256 bit HMAC.
*/
static inline void hmac_ll_read_result_256(uint32_t *result)
{
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < SHA256_DIGEST_SZ / REG_WIDTH; i++) {
result[i] = REG_READ(HMAC_RDATA_BASE + (i * REG_WIDTH));
}
}
/**
* @brief Clean the HMAC result provided to other hardware.
*/
static inline void hmac_ll_clean(void)
{
REG_WRITE(HMAC_SET_INVALIDATE_DS_REG, 1);
REG_WRITE(HMAC_SET_INVALIDATE_JTAG_REG, 1);
}
/**
* @brief Signals that the following block will be the padded last block.
*/
static inline void hmac_ll_msg_padding(void)
{
REG_WRITE(HMAC_SET_MESSAGE_PAD_REG, 1);
}
/**
* @brief Signals that all blocks have been written and a padding block will automatically be applied by hardware.
*
* Only applies if the message length is a multiple of 512 bits.
* See ESP32H4 TRM HMAC chapter for more details.
*/
static inline void hmac_ll_msg_end(void)
{
REG_WRITE(HMAC_SET_MESSAGE_END_REG, 1);
}
/**
* @brief The message including padding fits into one block, so no further action needs to be taken.
*
* This is called after the one-block-message has been written.
*/
static inline void hmac_ll_msg_one_block(void)
{
REG_WRITE(HMAC_ONE_BLOCK_REG, 1);
}
/**
* @brief Indicate that more blocks will be written after the last block.
*/
static inline void hmac_ll_msg_continue(void)
{
REG_WRITE(HMAC_SET_MESSAGE_ING_REG, 1);
}
/**
* @brief Clear the HMAC result.
*
* Use this after reading the HMAC result or if aborting after any of the other steps above.
*/
static inline void hmac_ll_calc_finish(void)
{
REG_WRITE(HMAC_SET_RESULT_FINISH_REG, 2);
}
#ifdef __cplusplus
}
#endif

951
components/hal/esp32h4/include/hal/i2c_ll.h
View File

@ -1,951 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for I2C register operations
#pragma once
#include "stdbool.h"
#include "hal/misc.h"
#include "hal/assert.h"
#include "soc/i2c_periph.h"
#include "soc/soc_caps.h"
#include "soc/i2c_struct.h"
#include "hal/i2c_types.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/clk_tree_defs.h"
#include "esp_rom_sys.h"
#include "esp_attr.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief I2C hardware cmd register fields.
*/
typedef union {
struct {
uint32_t byte_num: 8,
ack_en: 1,
ack_exp: 1,
ack_val: 1,
op_code: 3,
reserved14: 17,
done: 1;
};
uint32_t val;
} i2c_ll_hw_cmd_t;
// I2C operation mode command
#define I2C_LL_CMD_RESTART 6 /*!<I2C restart command */
#define I2C_LL_CMD_WRITE 1 /*!<I2C write command */
#define I2C_LL_CMD_READ 3 /*!<I2C read command */
#define I2C_LL_CMD_STOP 2 /*!<I2C stop command */
#define I2C_LL_CMD_END 4 /*!<I2C end command */
typedef enum {
I2C_INTR_NACK = (1 << 10),
I2C_INTR_TIMEOUT = (1 << 8),
I2C_INTR_MST_COMPLETE = (1 << 7),
I2C_INTR_ARBITRATION = (1 << 5),
I2C_INTR_END_DETECT = (1 << 3),
I2C_INTR_ST_TO = (1 << 13),
} i2c_ll_master_intr_t;
typedef enum {
I2C_INTR_TXFIFO_WM = (1 << 1),
I2C_INTR_RXFIFO_WM = (1 << 0),
I2C_INTR_SLV_COMPLETE = (1 << 7),
I2C_INTR_START = (1 << 15),
} i2c_ll_slave_intr_t;
// Get the I2C hardware instance
#define I2C_LL_GET_HW(i2c_num) (&I2C0)
#define I2C_LL_MASTER_EVENT_INTR (I2C_NACK_INT_ENA_M|I2C_TIME_OUT_INT_ENA_M|I2C_TRANS_COMPLETE_INT_ENA_M|I2C_ARBITRATION_LOST_INT_ENA_M|I2C_END_DETECT_INT_ENA_M|I2C_SCL_ST_TO_INT_ENA)
#define I2C_LL_SLAVE_EVENT_INTR (I2C_RXFIFO_WM_INT_ENA_M|I2C_TRANS_COMPLETE_INT_ENA_M|I2C_TXFIFO_WM_INT_ENA_M)
/**
* @brief Calculate I2C bus frequency
* Note that the clock accuracy is affected by the external pull-up resistor,
* here we try to to calculate a configuration parameter which is close to the required clock.
* But in I2C communication, the clock accuracy is not very concerned.
*
* @param source_clk I2C source clock
* @param bus_freq I2C bus frequency
* @param clk_cal Pointer to accept the clock configuration
*
* @return None
*/
static inline void i2c_ll_cal_bus_clk(uint32_t source_clk, uint32_t bus_freq, i2c_hal_clk_config_t *clk_cal)
{
uint32_t clkm_div = source_clk / (bus_freq * 1024) +1;
uint32_t sclk_freq = source_clk / clkm_div;
uint32_t half_cycle = sclk_freq / bus_freq / 2;
//SCL
clk_cal->clkm_div = clkm_div;
clk_cal->scl_low = half_cycle;
// default, scl_wait_high < scl_high
// Make 80KHz as a boundary here, because when working at lower frequency, too much scl_wait_high will faster the frequency
// according to some hardware behaviors.
clk_cal->scl_wait_high = (bus_freq >= 80*1000) ? (half_cycle / 2 - 2) : (half_cycle / 4);
clk_cal->scl_high = half_cycle - clk_cal->scl_wait_high;
clk_cal->sda_hold = half_cycle / 4;
clk_cal->sda_sample = half_cycle / 2;
clk_cal->setup = half_cycle;
clk_cal->hold = half_cycle;
//default we set the timeout value to about 10 bus cycles
// log(20*half_cycle)/log(2) = log(half_cycle)/log(2) + log(20)/log(2)
clk_cal->tout = (int)(sizeof(half_cycle) * 8 - __builtin_clz(5 * half_cycle)) + 2;
/* Verify the assumptions made by the hardware */
HAL_ASSERT(clk_cal->scl_wait_high < clk_cal->sda_sample &&
clk_cal->sda_sample < clk_cal->scl_high);
}
/**
* @brief Update I2C configuration
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_update(i2c_dev_t *hw)
{
hw->ctr.conf_upgate = 1;
}
/**
* @brief Configure the I2C bus timing related register.
*
* @param hw Beginning address of the peripheral registers
* @param bus_cfg Pointer to the data structure holding the register configuration.
*
* @return None
*/
static inline void i2c_ll_set_bus_timing(i2c_dev_t *hw, i2c_hal_clk_config_t *bus_cfg)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->clk_conf, sclk_div_num, bus_cfg->clkm_div - 1);
/* According to the Technical Reference Manual, the following timings must be subtracted by 1.
* However, according to the practical measurement and some hardware behaviour, if wait_high_period and scl_high minus one.
* The SCL frequency would be a little higher than expected. Therefore, the solution
* here is not to minus scl_high as well as scl_wait high, and the frequency will be absolutely accurate to all frequency
* to some extent. */
hw->scl_low_period.period = bus_cfg->scl_low - 1;
hw->scl_high_period.period = bus_cfg->scl_high;
hw->scl_high_period.scl_wait_high_period = bus_cfg->scl_wait_high;
//sda sample
hw->sda_hold.time = bus_cfg->sda_hold - 1;
hw->sda_sample.time = bus_cfg->sda_sample - 1;
//setup
hw->scl_rstart_setup.time = bus_cfg->setup - 1;
hw->scl_stop_setup.time = bus_cfg->setup - 1;
//hold
hw->scl_start_hold.time = bus_cfg->hold - 1;
hw->scl_stop_hold.time = bus_cfg->hold - 1;
hw->timeout.time_out_value = bus_cfg->tout;
hw->timeout.time_out_en = 1;
}
/**
* @brief Reset I2C txFIFO
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_txfifo_rst(i2c_dev_t *hw)
{
hw->fifo_conf.tx_fifo_rst = 1;
hw->fifo_conf.tx_fifo_rst = 0;
}
/**
* @brief Reset I2C rxFIFO
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_rxfifo_rst(i2c_dev_t *hw)
{
hw->fifo_conf.rx_fifo_rst = 1;
hw->fifo_conf.rx_fifo_rst = 0;
}
/**
* @brief Configure I2C SCL timing
*
* @param hw Beginning address of the peripheral registers
* @param hight_period The I2C SCL hight period (in core clock cycle, hight_period > 2)
* @param low_period The I2C SCL low period (in core clock cycle, low_period > 1)
*
* @return None.
*/
static inline void i2c_ll_set_scl_timing(i2c_dev_t *hw, int hight_period, int low_period)
{
hw->scl_low_period.period = low_period - 1;
hw->scl_high_period.period = hight_period - 10;
hw->scl_high_period.scl_wait_high_period = hight_period - hw->scl_high_period.period;
}
/**
* @brief Clear I2C interrupt status
*
* @param hw Beginning address of the peripheral registers
* @param mask Interrupt mask needs to be cleared
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_clear_intr_mask(i2c_dev_t *hw, uint32_t mask)
{
hw->int_clr.val = mask;
}
/**
* @brief Enable I2C interrupt
*
* @param hw Beginning address of the peripheral registers
* @param mask Interrupt mask needs to be enabled
*
* @return None
*/
static inline void i2c_ll_enable_intr_mask(i2c_dev_t *hw, uint32_t mask)
{
hw->int_ena.val |= mask;
}
/**
* @brief Disable I2C interrupt
*
* @param hw Beginning address of the peripheral registers
* @param mask Interrupt mask needs to be disabled
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_disable_intr_mask(i2c_dev_t *hw, uint32_t mask)
{
hw->int_ena.val &= (~mask);
}
/**
* @brief Get I2C interrupt status
*
* @param hw Beginning address of the peripheral registers
*
* @return I2C interrupt status
*/
__attribute__((always_inline))
static inline void i2c_ll_get_intr_mask(i2c_dev_t *hw, uint32_t *intr_status)
{
*intr_status = hw->int_status.val;
}
/**
* @brief Configure I2C memory access mode, FIFO mode or non-FIFO mode
*
* @param hw Beginning address of the peripheral registers
* @param fifo_mode_en Set true to enable FIFO access mode, else, set it false
*
* @return None
*/
static inline void i2c_ll_set_fifo_mode(i2c_dev_t *hw, bool fifo_mode_en)
{
hw->fifo_conf.nonfifo_en = fifo_mode_en ? 0 : 1;
}
/**
* @brief Configure I2C timeout
*
* @param hw Beginning address of the peripheral registers
* @param tout_num The I2C timeout value needs to be set (2^tout in core clock cycle)
*
* @return None
*/
static inline void i2c_ll_set_tout(i2c_dev_t *hw, int tout)
{
hw->timeout.time_out_value = tout;
}
/**
* @brief Configure I2C slave address
*
* @param hw Beginning address of the peripheral registers
* @param slave_addr I2C slave address needs to be set
* @param addr_10bit_en Set true to enable 10-bit slave address mode, set false to enable 7-bit address mode
*
* @return None
*/
static inline void i2c_ll_set_slave_addr(i2c_dev_t *hw, uint16_t slave_addr, bool addr_10bit_en)
{
hw->slave_addr.addr = slave_addr;
hw->slave_addr.en_10bit = addr_10bit_en;
}
/**
* @brief Write I2C hardware command register
*
* @param hw Beginning address of the peripheral registers
* @param cmd I2C hardware command
* @param cmd_idx The index of the command register, should be less than 16
*
* @return None
*/
static inline void i2c_ll_write_cmd_reg(i2c_dev_t *hw, i2c_ll_hw_cmd_t cmd, int cmd_idx)
{
hw->command[cmd_idx].val = cmd.val;
}
/**
* @brief Configure I2C start timing
*
* @param hw Beginning address of the peripheral registers
* @param start_setup The start condition setup period (in core clock cycle)
* @param start_hold The start condition hold period (in core clock cycle)
*
* @return None
*/
static inline void i2c_ll_set_start_timing(i2c_dev_t *hw, int start_setup, int start_hold)
{
hw->scl_rstart_setup.time = start_setup;
hw->scl_start_hold.time = start_hold - 1;
}
/**
* @brief Configure I2C stop timing
*
* @param hw Beginning address of the peripheral registers
* @param stop_setup The stop condition setup period (in core clock cycle)
* @param stop_hold The stop condition hold period (in core clock cycle)
*
* @return None
*/
static inline void i2c_ll_set_stop_timing(i2c_dev_t *hw, int stop_setup, int stop_hold)
{
hw->scl_stop_setup.time = stop_setup;
hw->scl_stop_hold.time = stop_hold;
}
/**
* @brief Configure I2C stop timing
*
* @param hw Beginning address of the peripheral registers
* @param sda_sample The SDA sample time (in core clock cycle)
* @param sda_hold The SDA hold time (in core clock cycle)
*
* @return None
*/
static inline void i2c_ll_set_sda_timing(i2c_dev_t *hw, int sda_sample, int sda_hold)
{
hw->sda_hold.time = sda_hold;
hw->sda_sample.time = sda_sample;
}
/**
* @brief Set I2C txFIFO empty threshold
*
* @param hw Beginning address of the peripheral registers
* @param empty_thr The txFIFO empty threshold
*
* @return None
*/
static inline void i2c_ll_set_txfifo_empty_thr(i2c_dev_t *hw, uint8_t empty_thr)
{
hw->fifo_conf.tx_fifo_wm_thrhd = empty_thr;
}
/**
* @brief Set I2C rxFIFO full threshold
*
* @param hw Beginning address of the peripheral registers
* @param full_thr The rxFIFO full threshold
*
* @return None
*/
static inline void i2c_ll_set_rxfifo_full_thr(i2c_dev_t *hw, uint8_t full_thr)
{
hw->fifo_conf.rx_fifo_wm_thrhd = full_thr;
}
/**
* @brief Set the I2C data mode, LSB or MSB
*
* @param hw Beginning address of the peripheral registers
* @param tx_mode Tx data bit mode
* @param rx_mode Rx data bit mode
*
* @return None
*/
static inline void i2c_ll_set_data_mode(i2c_dev_t *hw, i2c_trans_mode_t tx_mode, i2c_trans_mode_t rx_mode)
{
hw->ctr.tx_lsb_first = tx_mode;
hw->ctr.rx_lsb_first = rx_mode;
}
/**
* @brief Get the I2C data mode
*
* @param hw Beginning address of the peripheral registers
* @param tx_mode Pointer to accept the received bytes mode
* @param rx_mode Pointer to accept the sended bytes mode
*
* @return None
*/
static inline void i2c_ll_get_data_mode(i2c_dev_t *hw, i2c_trans_mode_t *tx_mode, i2c_trans_mode_t *rx_mode)
{
*tx_mode = hw->ctr.tx_lsb_first;
*rx_mode = hw->ctr.rx_lsb_first;
}
/**
* @brief Get I2C sda timing configuration
*
* @param hw Beginning address of the peripheral registers
* @param sda_sample Pointer to accept the SDA sample timing configuration
* @param sda_hold Pointer to accept the SDA hold timing configuration
*
* @return None
*/
static inline void i2c_ll_get_sda_timing(i2c_dev_t *hw, int *sda_sample, int *sda_hold)
{
*sda_hold = hw->sda_hold.time;
*sda_sample = hw->sda_sample.time;
}
/**
* @brief Get the I2C hardware version
*
* @param hw Beginning address of the peripheral registers
*
* @return The I2C hardware version
*/
static inline uint32_t i2c_ll_get_hw_version(i2c_dev_t *hw)
{
return hw->date;
}
/**
* @brief Check if the I2C bus is busy
*
* @param hw Beginning address of the peripheral registers
*
* @return True if I2C state machine is busy, else false will be returned
*/
static inline bool i2c_ll_is_bus_busy(i2c_dev_t *hw)
{
return hw->sr.bus_busy;
}
/**
* @brief Check if I2C is master mode
*
* @param hw Beginning address of the peripheral registers
*
* @return True if I2C is master mode, else false will be returned
*/
static inline bool i2c_ll_is_master_mode(i2c_dev_t *hw)
{
return hw->ctr.ms_mode;
}
/**
* @brief Get the rxFIFO readable length
*
* @param hw Beginning address of the peripheral registers
*
* @return RxFIFO readable length
*/
__attribute__((always_inline))
static inline void i2c_ll_get_rxfifo_cnt(i2c_dev_t *hw, uint32_t *length)
{
*length = hw->sr.rx_fifo_cnt;
}
/**
* @brief Get I2C txFIFO writable length
*
* @param hw Beginning address of the peripheral registers
*
* @return TxFIFO writable length
*/
__attribute__((always_inline))
static inline void i2c_ll_get_txfifo_len(i2c_dev_t *hw, uint32_t *length)
{
*length = SOC_I2C_FIFO_LEN - hw->sr.tx_fifo_cnt;
}
/**
* @brief Get I2C timeout configuration
*
* @param hw Beginning address of the peripheral registers
*
* @return The I2C timeout value
*/
static inline void i2c_ll_get_tout(i2c_dev_t *hw, int *timeout)
{
*timeout = hw->timeout.time_out_value;
}
/**
* @brief Start I2C transfer
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_trans_start(i2c_dev_t *hw)
{
hw->ctr.trans_start = 1;
}
/**
* @brief Get I2C start timing configuration
*
* @param hw Beginning address of the peripheral registers
* @param setup_time Pointer to accept the start condition setup period
* @param hold_time Pointer to accept the start condition hold period
*
* @return None
*/
static inline void i2c_ll_get_start_timing(i2c_dev_t *hw, int *setup_time, int *hold_time)
{
*setup_time = hw->scl_rstart_setup.time;
*hold_time = hw->scl_start_hold.time + 1;
}
/**
* @brief Get I2C stop timing configuration
*
* @param hw Beginning address of the peripheral registers
* @param setup_time Pointer to accept the stop condition setup period
* @param hold_time Pointer to accept the stop condition hold period
*
* @return None
*/
static inline void i2c_ll_get_stop_timing(i2c_dev_t *hw, int *setup_time, int *hold_time)
{
*setup_time = hw->scl_stop_setup.time;
*hold_time = hw->scl_stop_hold.time;
}
/**
* @brief Get I2C SCL timing configuration
*
* @param hw Beginning address of the peripheral registers
* @param high_period Pointer to accept the SCL high period
* @param low_period Pointer to accept the SCL low period
*
* @return None
*/
static inline void i2c_ll_get_scl_timing(i2c_dev_t *hw, int *high_period, int *low_period)
{
*high_period = hw->scl_high_period.period + hw->scl_high_period.scl_wait_high_period;
*low_period = hw->scl_low_period.period + 1;
}
/**
* @brief Write the I2C hardware txFIFO
*
* @param hw Beginning address of the peripheral registers
* @param ptr Pointer to data buffer
* @param len Amount of data needs to be writen
*
* @return None.
*/
__attribute__((always_inline))
static inline void i2c_ll_write_txfifo(i2c_dev_t *hw, const uint8_t *ptr, uint8_t len)
{
for (int i = 0; i< len; i++) {
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->fifo_data, data, ptr[i]);
}
}
/**
* @brief Read the I2C hardware rxFIFO
*
* @param hw Beginning address of the peripheral registers
* @param ptr Pointer to data buffer
* @param len Amount of data needs read
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_read_rxfifo(i2c_dev_t *hw, uint8_t *ptr, uint8_t len)
{
for(int i = 0; i < len; i++) {
ptr[i] = HAL_FORCE_READ_U32_REG_FIELD(hw->fifo_data, data);
}
}
/**
* @brief Configure I2C hardware filter
*
* @param hw Beginning address of the peripheral registers
* @param filter_num If the glitch period on the line is less than this value, it can be filtered out
* If `filter_num == 0`, the filter will be disabled
*
* @return None
*/
static inline void i2c_ll_set_filter(i2c_dev_t *hw, uint8_t filter_num)
{
if (filter_num > 0) {
hw->filter_cfg.scl_thres = filter_num;
hw->filter_cfg.sda_thres = filter_num;
hw->filter_cfg.scl_en = 1;
hw->filter_cfg.sda_en = 1;
} else {
hw->filter_cfg.scl_en = 0;
hw->filter_cfg.sda_en = 0;
}
}
/**
* @brief Get I2C hardware filter configuration
*
* @param hw Beginning address of the peripheral registers
*
* @return The hardware filter configuration
*/
static inline void i2c_ll_get_filter(i2c_dev_t *hw, uint8_t *filter_conf)
{
*filter_conf = hw->filter_cfg.scl_thres;
}
/**
* @brief Reste I2C master FSM. When the master FSM is stuck, call this function to reset the FSM
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_fsm_rst(i2c_dev_t *hw)
{
hw->ctr.fsm_rst = 1;
}
/**
* @brief Clear I2C bus, when the slave is stuck in a deadlock and keeps pulling the bus low,
* master can controls the SCL bus to generate 9 CLKs.
*
* Note: The master cannot detect if deadlock happens, but when the scl_st_to interrupt is generated, a deadlock may occur.
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_clr_bus(i2c_dev_t *hw)
{
hw->scl_sp_conf.scl_rst_slv_num = 9;
hw->scl_sp_conf.scl_rst_slv_en = 1;
hw->ctr.conf_upgate = 1;
// hardward will clear scl_rst_slv_en after sending SCL pulses,
// and we should set conf_upgate bit to synchronize register value.
while (hw->scl_sp_conf.scl_rst_slv_en);
hw->ctr.conf_upgate = 1;
}
/**
* @brief Set I2C source clock
*
* @param hw Beginning address of the peripheral registers
* @param src_clk Source clock of the I2C
*
* @return None
*/
static inline void i2c_ll_set_source_clk(i2c_dev_t *hw, i2c_clock_source_t src_clk)
{
// src_clk : (1) for RTC_CLK, (0) for XTAL
hw->clk_conf.sclk_sel = (src_clk == I2C_CLK_SRC_RC_FAST) ? 1 : 0;
}
/**
* @brief Enable I2C peripheral controller clock
*
* @param dev Peripheral instance address
* @param en True to enable, False to disable
*/
static inline void i2c_ll_enable_controller_clock(i2c_dev_t *hw, bool en)
{
hw->clk_conf.sclk_active = en;
}
/**
* @brief Init I2C master
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_init(i2c_dev_t *hw)
{
typeof(hw->ctr) ctrl_reg;
ctrl_reg.val = 0;
ctrl_reg.ms_mode = 1;
ctrl_reg.clk_en = 1;
ctrl_reg.sda_force_out = 1;
ctrl_reg.scl_force_out = 1;
hw->ctr.val = ctrl_reg.val;
}
/**
* @brief Init I2C slave
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_slave_init(i2c_dev_t *hw)
{
typeof(hw->ctr) ctrl_reg;
ctrl_reg.val = 0;
ctrl_reg.sda_force_out = 1;
ctrl_reg.scl_force_out = 1;
hw->ctr.val = ctrl_reg.val;
hw->fifo_conf.fifo_addr_cfg_en = 0;
}
/**
* @brief Set whether slave should auto start, or only start with start signal from master
*
* @param hw Beginning address of the peripheral registers
* @param slv_ex_auto_en 1 if slave auto start data transaction, otherwise, 0.
*/
static inline void i2c_ll_slave_tx_auto_start_en(i2c_dev_t *hw, bool slv_ex_auto_en)
{
hw->ctr.slv_tx_auto_start_en = slv_ex_auto_en;
}
/**
* @brief Get I2C interrupt status register address
*/
static inline volatile void *i2c_ll_get_interrupt_status_reg(i2c_dev_t *dev)
{
return &dev->int_status;
}
//////////////////////////////////////////Deprecated Functions//////////////////////////////////////////////////////////
/////////////////////////////The following functions are only used by the legacy driver/////////////////////////////////
/////////////////////////////They might be removed in the next major release (ESP-IDF 6.0)//////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// I2C master TX interrupt bitmap
#define I2C_LL_MASTER_TX_INT (I2C_NACK_INT_ENA_M|I2C_TIME_OUT_INT_ENA_M|I2C_TRANS_COMPLETE_INT_ENA_M|I2C_ARBITRATION_LOST_INT_ENA_M|I2C_END_DETECT_INT_ENA_M)
// I2C master RX interrupt bitmap
#define I2C_LL_MASTER_RX_INT (I2C_TIME_OUT_INT_ENA_M|I2C_TRANS_COMPLETE_INT_ENA_M|I2C_ARBITRATION_LOST_INT_ENA_M|I2C_END_DETECT_INT_ENA_M)
// I2C slave TX interrupt bitmap
#define I2C_LL_SLAVE_TX_INT (I2C_TXFIFO_WM_INT_ENA_M)
// I2C slave RX interrupt bitmap
#define I2C_LL_SLAVE_RX_INT (I2C_RXFIFO_WM_INT_ENA_M | I2C_TRANS_COMPLETE_INT_ENA_M)
// I2C max timeout value
#define I2C_LL_MAX_TIMEOUT I2C_TIME_OUT_REG_V
#define I2C_LL_INTR_MASK (0xffff) /*!< I2C all interrupt bitmap */
/**
* @brief I2C interrupt event
*/
typedef enum {
I2C_INTR_EVENT_ERR,
I2C_INTR_EVENT_ARBIT_LOST, /*!< I2C arbition lost event */
I2C_INTR_EVENT_NACK, /*!< I2C NACK event */
I2C_INTR_EVENT_TOUT, /*!< I2C time out event */
I2C_INTR_EVENT_END_DET, /*!< I2C end detected event */
I2C_INTR_EVENT_TRANS_DONE, /*!< I2C trans done event */
I2C_INTR_EVENT_RXFIFO_FULL, /*!< I2C rxfifo full event */
I2C_INTR_EVENT_TXFIFO_EMPTY, /*!< I2C txfifo empty event */
} i2c_intr_event_t;
/**
* @brief Configure I2C SCL timing
*
* @param hw Beginning address of the peripheral registers
* @param high_period The I2C SCL hight period (in core clock cycle, hight_period > 2)
* @param low_period The I2C SCL low period (in core clock cycle, low_period > 1)
* @param wait_high_period The I2C SCL wait rising edge period.
*
* @return None.
*/
static inline void i2c_ll_set_scl_clk_timing(i2c_dev_t *hw, int high_period, int low_period, int wait_high_period)
{
hw->scl_low_period.period = low_period;
hw->scl_high_period.period = high_period;
hw->scl_high_period.scl_wait_high_period = wait_high_period;
}
/**
* @brief Get I2C SCL timing configuration
*
* @param hw Beginning address of the peripheral registers
* @param high_period Pointer to accept the SCL high period
* @param low_period Pointer to accept the SCL low period
*
* @return None
*/
static inline void i2c_ll_get_scl_clk_timing(i2c_dev_t *hw, int *high_period, int *low_period, int *wait_high_period)
{
*high_period = hw->scl_high_period.period;
*wait_high_period = hw->scl_high_period.scl_wait_high_period;
*low_period = hw->scl_low_period.period;
}
/**
* @brief Get I2C master interrupt event
*
* @param hw Beginning address of the peripheral registers
* @param event Pointer to accept the interrupt event
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_master_get_event(i2c_dev_t *hw, i2c_intr_event_t *event)
{
typeof(hw->int_status) int_sts = hw->int_status;
if (int_sts.arbitration_lost) {
*event = I2C_INTR_EVENT_ARBIT_LOST;
} else if (int_sts.nack) {
*event = I2C_INTR_EVENT_NACK;
} else if (int_sts.time_out) {
*event = I2C_INTR_EVENT_TOUT;
} else if (int_sts.end_detect) {
*event = I2C_INTR_EVENT_END_DET;
} else if (int_sts.trans_complete) {
*event = I2C_INTR_EVENT_TRANS_DONE;
} else {
*event = I2C_INTR_EVENT_ERR;
}
}
/**
* @brief Get I2C slave interrupt event
*
* @param hw Beginning address of the peripheral registers
* @param event Pointer to accept the interrupt event
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_slave_get_event(i2c_dev_t *hw, i2c_intr_event_t *event)
{
typeof(hw->int_status) int_sts = hw->int_status;
if (int_sts.tx_fifo_wm) {
*event = I2C_INTR_EVENT_TXFIFO_EMPTY;
} else if (int_sts.trans_complete) {
*event = I2C_INTR_EVENT_TRANS_DONE;
} else if (int_sts.rx_fifo_wm) {
*event = I2C_INTR_EVENT_RXFIFO_FULL;
} else {
*event = I2C_INTR_EVENT_ERR;
}
}
/**
* @brief Enable I2C master TX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_enable_tx_it(i2c_dev_t *hw)
{
hw->int_clr.val = UINT32_MAX;
hw->int_ena.val = I2C_LL_MASTER_TX_INT;
}
/**
* @brief Enable I2C master RX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_enable_rx_it(i2c_dev_t *hw)
{
hw->int_clr.val = UINT32_MAX;
hw->int_ena.val = I2C_LL_MASTER_RX_INT;
}
/**
* @brief Disable I2C master TX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_master_disable_tx_it(i2c_dev_t *hw)
{
hw->int_ena.val &= (~I2C_LL_MASTER_TX_INT);
}
/**
* @brief Disable I2C master RX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_master_disable_rx_it(i2c_dev_t *hw)
{
hw->int_ena.val &= (~I2C_LL_MASTER_RX_INT);
}
/**
* @brief
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_slave_enable_tx_it(i2c_dev_t *hw)
{
hw->int_ena.val |= I2C_LL_SLAVE_TX_INT;
}
/**
* @brief Enable I2C slave RX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_slave_enable_rx_it(i2c_dev_t *hw)
{
hw->int_ena.val |= I2C_LL_SLAVE_RX_INT;
}
/**
* @brief Disable I2C slave TX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
__attribute__((always_inline))
static inline void i2c_ll_slave_disable_tx_it(i2c_dev_t *hw)
{
hw->int_ena.val &= (~I2C_LL_SLAVE_TX_INT);
}
/**
* @brief Disable I2C slave RX interrupt
*
* @param hw Beginning address of the peripheral registers
*
* @return None
*/
static inline void i2c_ll_slave_disable_rx_it(i2c_dev_t *hw)
{
hw->int_ena.val &= (~I2C_LL_SLAVE_RX_INT);
}
#ifdef __cplusplus
}
#endif

1180
components/hal/esp32h4/include/hal/i2s_ll.h
View File

File diff suppressed because it is too large Load Diff

504
components/hal/esp32h4/include/hal/ledc_ll.h
View File

@ -1,504 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for LEDC register operations.
// Note that most of the register operations in this layer are non-atomic operations.
#pragma once
#include "hal/ledc_types.h"
#include "soc/ledc_periph.h"
#include "soc/ledc_struct.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
#define LEDC_LL_GET_HW() &LEDC
#define LEDC_LL_DUTY_NUM_MAX (LEDC_DUTY_NUM_LSCH0_V)
#define LEDC_LL_DUTY_CYCLE_MAX (LEDC_DUTY_CYCLE_LSCH0_V)
#define LEDC_LL_DUTY_SCALE_MAX (LEDC_DUTY_SCALE_LSCH0_V)
#define LEDC_LL_HPOINT_VAL_MAX (LEDC_HPOINT_LSCH0_V)
#define LEDC_LL_FRACTIONAL_BITS (8)
#define LEDC_LL_FRACTIONAL_MAX ((1 << LEDC_LL_FRACTIONAL_BITS) - 1)
#define LEDC_LL_GLOBAL_CLOCKS { \
LEDC_SLOW_CLK_APB, \
LEDC_SLOW_CLK_XTAL, \
LEDC_SLOW_CLK_RC_FAST, \
}
#define LEDC_LL_GLOBAL_CLK_DEFAULT LEDC_SLOW_CLK_RC_FAST
/**
* @brief Set LEDC low speed timer clock
*
* @param hw Beginning address of the peripheral registers
* @param slow_clk_sel LEDC low speed timer clock source
*
* @return None
*/
static inline void ledc_ll_set_slow_clk_sel(ledc_dev_t *hw, ledc_slow_clk_sel_t slow_clk_sel)
{
uint32_t clk_sel_val = 0;
if (slow_clk_sel == LEDC_SLOW_CLK_APB) {
clk_sel_val = 1;
} else if (slow_clk_sel == LEDC_SLOW_CLK_RC_FAST) {
clk_sel_val = 2;
} else if (slow_clk_sel == LEDC_SLOW_CLK_XTAL) {
clk_sel_val = 3;
}
hw->conf.apb_clk_sel = clk_sel_val;
}
/**
* @brief Get LEDC low speed timer clock
*
* @param hw Beginning address of the peripheral registers
* @param slow_clk_sel LEDC low speed timer clock source
*
* @return None
*/
static inline void ledc_ll_get_slow_clk_sel(ledc_dev_t *hw, ledc_slow_clk_sel_t *slow_clk_sel)
{
uint32_t clk_sel_val = hw->conf.apb_clk_sel;
if (clk_sel_val == 1) {
*slow_clk_sel = LEDC_SLOW_CLK_APB;
} else if (clk_sel_val == 2) {
*slow_clk_sel = LEDC_SLOW_CLK_RC_FAST;
} else if (clk_sel_val == 3) {
*slow_clk_sel = LEDC_SLOW_CLK_XTAL;
} else {
abort();
}
}
/**
* @brief Update LEDC low speed timer
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
*
* @return None
*/
static inline void ledc_ll_ls_timer_update(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.low_speed_update = 1;
}
/**
* @brief Reset LEDC timer
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
*
* @return None
*/
static inline void ledc_ll_timer_rst(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.rst = 1;
hw->timer_group[speed_mode].timer[timer_sel].conf.rst = 0;
}
/**
* @brief Pause LEDC timer
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
*
* @return None
*/
static inline void ledc_ll_timer_pause(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.pause = 1;
}
/**
* @brief Resume LEDC timer
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
*
* @return None
*/
static inline void ledc_ll_timer_resume(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.pause = 0;
}
/**
* @brief Set LEDC timer clock divider
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
* @param clock_divider Timer clock divide value, the timer clock is divided from the selected clock source
*
* @return None
*/
static inline void ledc_ll_set_clock_divider(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t clock_divider)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.clock_divider = clock_divider;
}
/**
* @brief Get LEDC timer clock divider
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
* @param clock_divider Timer clock divide value, the timer clock is divided from the selected clock source
*
* @return None
*/
static inline void ledc_ll_get_clock_divider(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t *clock_divider)
{
*clock_divider = hw->timer_group[speed_mode].timer[timer_sel].conf.clock_divider;
}
/**
* @brief Get LEDC timer clock source
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
* @param clk_src Pointer to accept the timer clock source
*
* @return None
*/
static inline void ledc_ll_get_clock_source(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel, ledc_clk_src_t *clk_src)
{
*clk_src = LEDC_APB_CLK;
}
/**
* @brief Set LEDC duty resolution
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
* @param duty_resolution Resolution of duty setting in number of bits. The range of duty values is [0, (2**duty_resolution)]
*
* @return None
*/
static inline void ledc_ll_set_duty_resolution(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t duty_resolution)
{
hw->timer_group[speed_mode].timer[timer_sel].conf.duty_resolution = duty_resolution;
}
/**
* @brief Get LEDC duty resolution
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
* @param duty_resolution Pointer to accept the resolution of duty setting in number of bits.
*
* @return None
*/
static inline void ledc_ll_get_duty_resolution(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t *duty_resolution)
{
*duty_resolution = hw->timer_group[speed_mode].timer[timer_sel].conf.duty_resolution;
}
/**
* @brief Update channel configure when select low speed mode
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
*
* @return None
*/
static inline void ledc_ll_ls_channel_update(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num)
{
hw->channel_group[speed_mode].channel[channel_num].conf0.low_speed_update = 1;
}
/**
* @brief Get LEDC max duty
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param max_duty Pointer to accept the max duty
*
* @return None
*/
static inline void ledc_ll_get_max_duty(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t *max_duty)
{
uint32_t timer_sel = hw->channel_group[speed_mode].channel[channel_num].conf0.timer_sel;
*max_duty = (1 << (LEDC.timer_group[speed_mode].timer[timer_sel].conf.duty_resolution));
}
/**
* @brief Set LEDC hpoint value
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param hpoint_val LEDC hpoint value(max: 0xfffff)
*
* @return None
*/
static inline void ledc_ll_set_hpoint(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t hpoint_val)
{
hw->channel_group[speed_mode].channel[channel_num].hpoint.hpoint = hpoint_val;
}
/**
* @brief Get LEDC hpoint value
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param hpoint_val Pointer to accept the LEDC hpoint value(max: 0xfffff)
*
* @return None
*/
static inline void ledc_ll_get_hpoint(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t *hpoint_val)
{
*hpoint_val = hw->channel_group[speed_mode].channel[channel_num].hpoint.hpoint;
}
/**
* @brief Set LEDC the integer part of duty value
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_val LEDC duty value, the range of duty setting is [0, (2**duty_resolution)]
*
* @return None
*/
static inline void ledc_ll_set_duty_int_part(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t duty_val)
{
hw->channel_group[speed_mode].channel[channel_num].duty.duty = duty_val << 4;
}
/**
* @brief Get LEDC duty value
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_val Pointer to accept the LEDC duty value
*
* @return None
*/
static inline void ledc_ll_get_duty(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t *duty_val)
{
*duty_val = (hw->channel_group[speed_mode].channel[channel_num].duty_rd.duty_read >> 4);
}
/**
* @brief Set LEDC duty change direction
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_direction LEDC duty change direction, increase or decrease
*
* @return None
*/
static inline void ledc_ll_set_duty_direction(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, ledc_duty_direction_t duty_direction)
{
hw->channel_group[speed_mode].channel[channel_num].conf1.duty_inc = duty_direction;
}
/**
* @brief Get LEDC duty change direction
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_direction Pointer to accept the LEDC duty change direction, increase or decrease
*
* @return None
*/
static inline void ledc_ll_get_duty_direction(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, ledc_duty_direction_t *duty_direction)
{
*duty_direction = hw->channel_group[speed_mode].channel[channel_num].conf1.duty_inc;
}
/**
* @brief Set the number of increased or decreased times
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_num The number of increased or decreased times
*
* @return None
*/
static inline void ledc_ll_set_duty_num(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t duty_num)
{
hw->channel_group[speed_mode].channel[channel_num].conf1.duty_num = duty_num;
}
/**
* @brief Set the duty cycles of increase or decrease
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_cycle The duty cycles
*
* @return None
*/
static inline void ledc_ll_set_duty_cycle(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t duty_cycle)
{
hw->channel_group[speed_mode].channel[channel_num].conf1.duty_cycle = duty_cycle;
}
/**
* @brief Set the step scale of increase or decrease
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_scale The step scale
*
* @return None
*/
static inline void ledc_ll_set_duty_scale(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t duty_scale)
{
hw->channel_group[speed_mode].channel[channel_num].conf1.duty_scale = duty_scale;
}
/**
* @brief Set the output enable
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param sig_out_en The output enable status
*
* @return None
*/
static inline void ledc_ll_set_sig_out_en(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, bool sig_out_en)
{
hw->channel_group[speed_mode].channel[channel_num].conf0.sig_out_en = sig_out_en;
}
/**
* @brief Set the duty start
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param duty_start The duty start
*
* @return None
*/
static inline void ledc_ll_set_duty_start(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, bool duty_start)
{
hw->channel_group[speed_mode].channel[channel_num].conf1.duty_start = duty_start;
}
/**
* @brief Set output idle level
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param idle_level The output idle level
*
* @return None
*/
static inline void ledc_ll_set_idle_level(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t idle_level)
{
hw->channel_group[speed_mode].channel[channel_num].conf0.idle_lv = idle_level & 0x1;
}
/**
* @brief Set fade end interrupt enable
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param fade_end_intr_en The fade end interrupt enable status
*
* @return None
*/
static inline void ledc_ll_set_fade_end_intr(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, bool fade_end_intr_en)
{
uint32_t value = hw->int_ena.val;
uint32_t int_en_base = LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
hw->int_ena.val = fade_end_intr_en ? (value | BIT(int_en_base + channel_num)) : (value & (~(BIT(int_en_base + channel_num))));
}
/**
* @brief Get fade end interrupt status
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param intr_status The fade end interrupt status
*
* @return None
*/
static inline void ledc_ll_get_fade_end_intr_status(ledc_dev_t *hw, ledc_mode_t speed_mode, uint32_t *intr_status)
{
uint32_t value = hw->int_st.val;
uint32_t int_en_base = LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
*intr_status = (value >> int_en_base) & 0xff;
}
/**
* @brief Clear fade end interrupt status
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
*
* @return None
*/
static inline void ledc_ll_clear_fade_end_intr_status(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num)
{
uint32_t int_en_base = LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S;
hw->int_clr.val = BIT(int_en_base + channel_num);
}
/**
* @brief Set timer index of the specified channel
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param timer_sel LEDC timer index (0-3), select from ledc_timer_t
*
* @return None
*/
static inline void ledc_ll_bind_channel_timer(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, ledc_timer_t timer_sel)
{
hw->channel_group[speed_mode].channel[channel_num].conf0.timer_sel = timer_sel;
}
/**
* @brief Get timer index of the specified channel
*
* @param hw Beginning address of the peripheral registers
* @param speed_mode LEDC speed_mode, high-speed mode or low-speed mode
* @param channel_num LEDC channel index (0-7), select from ledc_channel_t
* @param timer_sel Pointer to accept the LEDC timer index
*
* @return None
*/
static inline void ledc_ll_get_channel_timer(ledc_dev_t *hw, ledc_mode_t speed_mode, ledc_channel_t channel_num, ledc_timer_t *timer_sel)
{
*timer_sel = hw->channel_group[speed_mode].channel[channel_num].conf0.timer_sel;
}
#ifdef __cplusplus
}
#endif

564
components/hal/esp32h4/include/hal/memprot_ll.h
View File

@ -1,564 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "soc/sensitive_reg.h"
#include "soc/ext_mem_defs.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
/* ******************************************************************************************************
* *** GLOBALS ***
* NOTE: in this version, all the configurations apply only to WORLD_0
*/
#define IRAM_SRAM_START 0x4037C000
#define DRAM_SRAM_START 0x3FC7C000
/* ICache size is fixed to 16KB on ESP32-H4 */
#ifndef ICACHE_SIZE
#define ICACHE_SIZE 0x4000
#endif
#ifndef I_D_SRAM_SEGMENT_SIZE
#define I_D_SRAM_SEGMENT_SIZE 0x20000
#endif
#define I_D_SPLIT_LINE_SHIFT 0x9
#define I_D_FAULT_ADDR_SHIFT 0x2
static inline void memprot_ll_set_iram0_dram0_split_line_lock(void)
{
REG_WRITE(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_0_REG, 1);
}
static inline bool memprot_ll_get_iram0_dram0_split_line_lock(void)
{
return REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_0_REG) == 1;
}
static inline void* memprot_ll_get_split_addr_from_reg(uint32_t regval, uint32_t base)
{
return (void*)
(base + ((regval & SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_M)
>> (SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_S - I_D_SPLIT_LINE_SHIFT)));
}
/* ******************************************************************************************************
* *** IRAM0 ***
*/
//16kB (CACHE)
#define IRAM0_SRAM_LEVEL_0_LOW IRAM_SRAM_START //0x40370000
#define IRAM0_SRAM_LEVEL_0_HIGH (IRAM0_SRAM_LEVEL_0_LOW + ICACHE_SIZE - 0x1) //0x4037FFFF
//128kB (LEVEL 1)
#define IRAM0_SRAM_LEVEL_1_LOW (IRAM0_SRAM_LEVEL_0_HIGH + 0x1) //0x40380000
#define IRAM0_SRAM_LEVEL_1_HIGH (IRAM0_SRAM_LEVEL_1_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x4039FFFF
//128kB (LEVEL 2)
#define IRAM0_SRAM_LEVEL_2_LOW (IRAM0_SRAM_LEVEL_1_HIGH + 0x1) //0x403A0000
#define IRAM0_SRAM_LEVEL_2_HIGH (IRAM0_SRAM_LEVEL_2_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x403BFFFF
//128kB (LEVEL 3)
#define IRAM0_SRAM_LEVEL_3_LOW (IRAM0_SRAM_LEVEL_2_HIGH + 0x1) //0x403C0000
#define IRAM0_SRAM_LEVEL_3_HIGH (IRAM0_SRAM_LEVEL_3_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x403DFFFF
//permission bits
#define SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R 0x1
#define SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W 0x2
#define SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_F 0x4
static inline uint32_t memprot_ll_iram0_get_intr_source_num(void)
{
return ETS_CORE0_IRAM0_PMS_INTR_SOURCE;
}
///////////////////////////////////
// IRAM0 - SPLIT LINES
///////////////////////////////////
static inline void memprot_ll_set_iram0_split_line(const void *line_addr, uint32_t sensitive_reg)
{
uint32_t addr = (uint32_t)line_addr;
HAL_ASSERT( addr >= IRAM0_SRAM_LEVEL_1_LOW && addr <= IRAM0_SRAM_LEVEL_3_HIGH );
uint32_t category[3] = {0};
if (addr <= IRAM0_SRAM_LEVEL_1_HIGH) {
category[0] = 0x2;
category[1] = category[2] = 0x3;
} else if (addr >= IRAM0_SRAM_LEVEL_2_LOW && addr <= IRAM0_SRAM_LEVEL_2_HIGH) {
category[1] = 0x2;
category[2] = 0x3;
} else {
category[2] = 0x2;
}
//NOTE: category & split line address bits are the same for all the areas
uint32_t category_bits =
(category[0] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_0_S) |
(category[1] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_1_S) |
(category[2] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_2_S);
uint32_t conf_addr = ((addr >> I_D_SPLIT_LINE_SHIFT) & SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_V) << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_S;
uint32_t reg_cfg = conf_addr | category_bits;
REG_WRITE(sensitive_reg, reg_cfg);
}
/* can be both IRAM0/DRAM0 address */
static inline void memprot_ll_set_iram0_split_line_main_I_D(const void *line_addr)
{
memprot_ll_set_iram0_split_line(line_addr, SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_1_REG);
}
static inline void memprot_ll_set_iram0_split_line_I_0(const void *line_addr)
{
memprot_ll_set_iram0_split_line(line_addr, SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_2_REG);
}
static inline void memprot_ll_set_iram0_split_line_I_1(const void *line_addr)
{
memprot_ll_set_iram0_split_line(line_addr, SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_3_REG);
}
static inline void* memprot_ll_get_iram0_split_line_main_I_D(void)
{
return memprot_ll_get_split_addr_from_reg(REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_1_REG), SOC_DIRAM_IRAM_LOW);
}
static inline void* memprot_ll_get_iram0_split_line_I_0(void)
{
return memprot_ll_get_split_addr_from_reg(REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_2_REG), SOC_DIRAM_IRAM_LOW);
}
static inline void* memprot_ll_get_iram0_split_line_I_1(void)
{
return memprot_ll_get_split_addr_from_reg(REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_3_REG), SOC_DIRAM_IRAM_LOW);
}
///////////////////////////////////
// IRAM0 - PMS CONFIGURATION
///////////////////////////////////
// lock
static inline void memprot_ll_iram0_set_pms_lock(void)
{
REG_WRITE(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_0_REG, 1);
}
static inline bool memprot_ll_iram0_get_pms_lock(void)
{
return REG_READ(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_0_REG) == 1;
}
// permission settings
static inline uint32_t memprot_ll_iram0_set_permissions(bool r, bool w, bool x)
{
uint32_t permissions = 0;
if ( r ) {
permissions |= SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R;
}
if ( w ) {
permissions |= SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W;
}
if ( x ) {
permissions |= SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_F;
}
return permissions;
}
static inline void memprot_ll_iram0_set_pms_area_0(bool r, bool w, bool x)
{
REG_SET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_0, memprot_ll_iram0_set_permissions(r, w, x));
}
static inline void memprot_ll_iram0_set_pms_area_1(bool r, bool w, bool x)
{
REG_SET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_1, memprot_ll_iram0_set_permissions(r, w, x));
}
static inline void memprot_ll_iram0_set_pms_area_2(bool r, bool w, bool x)
{
REG_SET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_2, memprot_ll_iram0_set_permissions(r, w, x));
}
static inline void memprot_ll_iram0_set_pms_area_3(bool r, bool w, bool x)
{
REG_SET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_3, memprot_ll_iram0_set_permissions(r, w, x));
}
static inline void memprot_ll_iram0_get_permissions(uint32_t perms, bool *r, bool *w, bool *x)
{
*r = perms & SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R;
*w = perms & SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W;
*x = perms & SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_F;
}
static inline void memprot_ll_iram0_get_pms_area_0(bool *r, bool *w, bool *x)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_0);
memprot_ll_iram0_get_permissions( permissions, r, w, x);
}
static inline void memprot_ll_iram0_get_pms_area_1(bool *r, bool *w, bool *x)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_1);
memprot_ll_iram0_get_permissions( permissions, r, w, x);
}
static inline void memprot_ll_iram0_get_pms_area_2(bool *r, bool *w, bool *x)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_2);
memprot_ll_iram0_get_permissions( permissions, r, w, x);
}
static inline void memprot_ll_iram0_get_pms_area_3(bool *r, bool *w, bool *x)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_2_REG, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_3);
memprot_ll_iram0_get_permissions( permissions, r, w, x);
}
///////////////////////////////////
// IRAM0 - MONITOR
///////////////////////////////////
// lock
static inline void memprot_ll_iram0_set_monitor_lock(void)
{
REG_WRITE(SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_0_REG, 1);
}
static inline bool memprot_ll_iram0_get_monitor_lock(void)
{
return REG_READ(SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_0_REG) == 1;
}
// interrupt enable/clear
static inline void memprot_ll_iram0_set_monitor_en(bool enable)
{
if ( enable ) {
REG_SET_BIT( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_EN );
} else {
REG_CLR_BIT( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_EN );
}
}
static inline bool memprot_ll_iram0_get_monitor_en(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_EN ) == 1;
}
static inline void memprot_ll_iram0_clear_monitor_intr(void)
{
REG_SET_BIT( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_CLR );
}
static inline void memprot_ll_iram0_reset_clear_monitor_intr(void)
{
REG_CLR_BIT( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_CLR );
}
static inline uint32_t memprot_ll_iram0_get_monitor_enable_register(void)
{
return REG_READ(SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_1_REG);
}
// // permission violation status
static inline uint32_t memprot_ll_iram0_get_monitor_status_intr(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_INTR );
}
static inline uint32_t memprot_ll_iram0_get_monitor_status_fault_wr(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_STATUS_WR );
}
static inline uint32_t memprot_ll_iram0_get_monitor_status_fault_loadstore(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_STATUS_LOADSTORE );
}
static inline uint32_t memprot_ll_iram0_get_monitor_status_fault_world(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_STATUS_WORLD );
}
static inline uint32_t memprot_ll_iram0_get_monitor_status_fault_addr(void)
{
uint32_t addr = REG_GET_FIELD( SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_VIOLATE_STATUS_ADDR );
return addr > 0 ? (addr << I_D_FAULT_ADDR_SHIFT) + IRAM0_ADDRESS_LOW : 0;
}
static inline uint32_t memprot_ll_iram0_get_monitor_status_register(void)
{
return REG_READ(SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_2_REG);
}
/* ******************************************************************************************************
* *** DRAM0 ***
*/
//cache not available from DRAM (!)
#define DRAM0_SRAM_LEVEL_0_LOW DRAM_SRAM_START //0x3FC7C000
#define DRAM0_SRAM_LEVEL_0_HIGH (DRAM0_SRAM_LEVEL_0_LOW + ICACHE_SIZE - 0x1) //0x3FC7FFFF
//128kB
#define DRAM0_SRAM_LEVEL_1_LOW (DRAM0_SRAM_LEVEL_0_HIGH + 0x1) //0x3FC80000
#define DRAM0_SRAM_LEVEL_1_HIGH (DRAM0_SRAM_LEVEL_1_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x3FC9FFFF
//128kB
#define DRAM0_SRAM_LEVEL_2_LOW (DRAM0_SRAM_LEVEL_1_HIGH + 0x1) //0x3FCA0000
#define DRAM0_SRAM_LEVEL_2_HIGH (DRAM0_SRAM_LEVEL_2_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x3FCBFFFF
//128kB
#define DRAM0_SRAM_LEVEL_3_LOW (DRAM0_SRAM_LEVEL_2_HIGH + 0x1) //0x3FCC0000
#define DRAM0_SRAM_LEVEL_3_HIGH (DRAM0_SRAM_LEVEL_3_LOW + I_D_SRAM_SEGMENT_SIZE - 0x1) //0x3FCDFFFF
#define SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W 0x2
#define SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R 0x1
static inline uint32_t memprot_ll_dram0_get_intr_source_num(void)
{
return ETS_CORE0_DRAM0_PMS_INTR_SOURCE;
}
///////////////////////////////////
// DRAM0 - SPLIT LINES
///////////////////////////////////
static inline void memprot_ll_set_dram0_split_line(const void *line_addr, uint32_t sensitive_reg)
{
uint32_t addr = (uint32_t)line_addr;
HAL_ASSERT( addr >= DRAM0_SRAM_LEVEL_1_LOW && addr <= DRAM0_SRAM_LEVEL_3_HIGH );
uint32_t category[3] = {0};
if (addr <= DRAM0_SRAM_LEVEL_1_HIGH) {
category[0] = 0x2;
category[1] = category[2] = 0x3;
} else if (addr >= DRAM0_SRAM_LEVEL_2_LOW && addr <= DRAM0_SRAM_LEVEL_2_HIGH) {
category[1] = 0x2;
category[2] = 0x3;
} else {
category[2] = 0x2;
}
//NOTE: line address & category bits, shifts and masks are the same for all the areas
uint32_t category_bits =
(category[0] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_0_S) |
(category[1] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_1_S) |
(category[2] << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_CATEGORY_2_S);
uint32_t conf_addr = ((addr >> I_D_SPLIT_LINE_SHIFT) & SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_V) << SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SRAM_SPLITADDR_S;
uint32_t reg_cfg = conf_addr | category_bits;
REG_WRITE(sensitive_reg, reg_cfg);
}
static inline void memprot_ll_set_dram0_split_line_D_0(const void *line_addr)
{
memprot_ll_set_dram0_split_line(line_addr, SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_2_REG);
}
static inline void memprot_ll_set_dram0_split_line_D_1(const void *line_addr)
{
memprot_ll_set_dram0_split_line(line_addr, SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_3_REG);
}
static inline void* memprot_ll_get_dram0_split_line_D_0(void)
{
return memprot_ll_get_split_addr_from_reg(REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_2_REG), SOC_DIRAM_DRAM_LOW);
}
static inline void* memprot_ll_get_dram0_split_line_D_1(void)
{
return memprot_ll_get_split_addr_from_reg(REG_READ(SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_3_REG), SOC_DIRAM_DRAM_LOW);
}
///////////////////////////////////
// DRAM0 - PMS CONFIGURATION
///////////////////////////////////
// lock
static inline void memprot_ll_dram0_set_pms_lock(void)
{
REG_WRITE(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_0_REG, 1);
}
static inline bool memprot_ll_dram0_get_pms_lock(void)
{
return REG_READ(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_0_REG) == 1;
}
// permission settings
static inline uint32_t memprot_ll_dram0_set_permissions(bool r, bool w)
{
uint32_t permissions = 0;
if ( r ) {
permissions |= SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R;
}
if ( w ) {
permissions |= SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W;
}
return permissions;
}
static inline void memprot_ll_dram0_set_pms_area_0(bool r, bool w)
{
REG_SET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_0, memprot_ll_dram0_set_permissions(r, w));
}
static inline void memprot_ll_dram0_set_pms_area_1(bool r, bool w)
{
REG_SET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_1, memprot_ll_dram0_set_permissions(r, w));
}
static inline void memprot_ll_dram0_set_pms_area_2(bool r, bool w)
{
REG_SET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_2, memprot_ll_dram0_set_permissions(r, w));
}
static inline void memprot_ll_dram0_set_pms_area_3(bool r, bool w)
{
REG_SET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_3, memprot_ll_dram0_set_permissions(r, w));
}
static inline void memprot_ll_dram0_get_permissions(uint32_t perms, bool *r, bool *w )
{
*r = perms & SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_R;
*w = perms & SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_W;
}
static inline void memprot_ll_dram0_get_pms_area_0(bool *r, bool *w)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_0);
memprot_ll_dram0_get_permissions( permissions, r, w);
}
static inline void memprot_ll_dram0_get_pms_area_1(bool *r, bool *w)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_1);
memprot_ll_dram0_get_permissions( permissions, r, w);
}
static inline void memprot_ll_dram0_get_pms_area_2(bool *r, bool *w)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_2);
memprot_ll_dram0_get_permissions( permissions, r, w);
}
static inline void memprot_ll_dram0_get_pms_area_3(bool *r, bool *w)
{
uint32_t permissions = REG_GET_FIELD(SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_1_REG, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_SRAM_WORLD_0_PMS_3);
memprot_ll_dram0_get_permissions( permissions, r, w);
}
///////////////////////////////////
// DRAM0 - MONITOR
///////////////////////////////////
// lock
static inline void memprot_ll_dram0_set_monitor_lock(void)
{
REG_WRITE(SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_0_REG, 1);
}
static inline bool memprot_ll_dram0_get_monitor_lock(void)
{
return REG_READ(SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_0_REG) == 1;
}
// interrupt enable/clear
static inline void memprot_ll_dram0_set_monitor_en(bool enable)
{
if ( enable ) {
REG_SET_BIT( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_EN );
} else {
REG_CLR_BIT( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_EN );
}
}
static inline bool memprot_ll_dram0_get_monitor_en(void)
{
return REG_GET_BIT( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_EN ) == 1;
}
static inline void memprot_ll_dram0_clear_monitor_intr(void)
{
REG_SET_BIT( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_CLR );
}
static inline void memprot_ll_dram0_reset_clear_monitor_intr(void)
{
REG_CLR_BIT( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_CLR );
}
static inline uint32_t memprot_ll_dram0_get_monitor_enable_register(void)
{
return REG_READ(SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_1_REG);
}
// permission violation status
static inline uint32_t memprot_ll_dram0_get_monitor_status_intr(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_INTR );
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_fault_lock(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_STATUS_LOCK );
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_fault_world(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_STATUS_WORLD );
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_fault_addr(void)
{
uint32_t addr = REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_STATUS_ADDR );
return addr > 0 ? (addr << I_D_FAULT_ADDR_SHIFT) + DRAM0_ADDRESS_LOW : 0;
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_fault_wr(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_3_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_STATUS_WR );
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_fault_byte_en(void)
{
return REG_GET_FIELD( SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG, SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_VIOLATE_STATUS_BYTEEN );
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_register_1(void)
{
return REG_READ(SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_2_REG);
}
static inline uint32_t memprot_ll_dram0_get_monitor_status_register_2(void)
{
return REG_READ(SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_3_REG);
}
#ifdef __cplusplus
}
#endif

317
components/hal/esp32h4/include/hal/mmu_ll.h
View File

@ -1,317 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for MMU register operations
#pragma once
#include "esp_types.h"
#include "soc/extmem_reg.h"
#include "soc/ext_mem_defs.h"
#include "hal/assert.h"
#include "hal/mmu_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Convert MMU virtual address to linear address
*
* @param vaddr virtual address
*
* @return linear address
*/
static inline uint32_t mmu_ll_vaddr_to_laddr(uint32_t vaddr)
{
return vaddr & SOC_MMU_LINEAR_ADDR_MASK;
}
/**
* Convert MMU linear address to virtual address
*
* @param laddr linear address
* @param vaddr_type virtual address type, could be instruction type or data type. See `mmu_vaddr_t`
*
* @return virtual address
*/
static inline uint32_t mmu_ll_laddr_to_vaddr(uint32_t laddr, mmu_vaddr_t vaddr_type)
{
uint32_t vaddr_base = 0;
if (vaddr_type == MMU_VADDR_DATA) {
vaddr_base = SOC_MMU_DBUS_VADDR_BASE;
} else {
vaddr_base = SOC_MMU_IBUS_VADDR_BASE;
}
return vaddr_base | laddr;
}
/**
* Get MMU page size
*
* @param mmu_id MMU ID
*
* @return MMU page size code
*/
__attribute__((always_inline))
static inline mmu_page_size_t mmu_ll_get_page_size(uint32_t mmu_id)
{
(void)mmu_id;
//On esp32h4, MMU page size is always 64KB
return MMU_PAGE_64KB;
}
/**
* Set MMU page size
*
* @param size MMU page size
*
* @note On esp32h4, only supports `MMU_PAGE_64KB`
*/
__attribute__((always_inline))
static inline void mmu_ll_set_page_size(uint32_t mmu_id, uint32_t size)
{
HAL_ASSERT(size == MMU_PAGE_64KB);
}
/**
* Check if the external memory vaddr region is valid
*
* @param mmu_id MMU ID
* @param vaddr_start start of the virtual address
* @param len length, in bytes
* @param type virtual address type, could be instruction type or data type. See `mmu_vaddr_t`
*
* @return
* True for valid
*/
__attribute__((always_inline))
static inline bool mmu_ll_check_valid_ext_vaddr_region(uint32_t mmu_id, uint32_t vaddr_start, uint32_t len, mmu_vaddr_t type)
{
(void)mmu_id;
uint32_t vaddr_end = vaddr_start + len - 1;
bool valid = false;
if (type & MMU_VADDR_INSTRUCTION) {
valid |= (ADDRESS_IN_IRAM0_CACHE(vaddr_start) && ADDRESS_IN_IRAM0_CACHE(vaddr_end));
}
if (type & MMU_VADDR_DATA) {
valid |= (ADDRESS_IN_DRAM0_CACHE(vaddr_start) && ADDRESS_IN_DRAM0_CACHE(vaddr_end));
}
return valid;
}
/**
* Check if the paddr region is valid
*
* @param mmu_id MMU ID
* @param paddr_start start of the physical address
* @param len length, in bytes
*
* @return
* True for valid
*/
static inline bool mmu_ll_check_valid_paddr_region(uint32_t mmu_id, uint32_t paddr_start, uint32_t len)
{
(void)mmu_id;
return (paddr_start < (mmu_ll_get_page_size(mmu_id) * MMU_MAX_PADDR_PAGE_NUM)) &&
(len < (mmu_ll_get_page_size(mmu_id) * MMU_MAX_PADDR_PAGE_NUM)) &&
((paddr_start + len - 1) < (mmu_ll_get_page_size(mmu_id) * MMU_MAX_PADDR_PAGE_NUM));
}
/**
* To get the MMU table entry id to be mapped
*
* @param mmu_id MMU ID
* @param vaddr virtual address to be mapped
*
* @return
* MMU table entry id
*/
__attribute__((always_inline))
static inline uint32_t mmu_ll_get_entry_id(uint32_t mmu_id, uint32_t vaddr)
{
(void)mmu_id;
return ((vaddr & MMU_VADDR_MASK) >> 16);
}
/**
* Format the paddr to be mappable
*
* @param mmu_id MMU ID
* @param paddr physical address to be mapped
* @param target paddr memory target, not used
*
* @return
* mmu_val - paddr in MMU table supported format
*/
__attribute__((always_inline))
static inline uint32_t mmu_ll_format_paddr(uint32_t mmu_id, uint32_t paddr, mmu_target_t target)
{
(void)mmu_id;
(void)target;
return paddr >> 16;
}
/**
* Write to the MMU table to map the virtual memory and the physical memory
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
* @param mmu_val Value to be set into an MMU entry, for physical address
* @param target MMU target physical memory.
*/
__attribute__((always_inline))
static inline void mmu_ll_write_entry(uint32_t mmu_id, uint32_t entry_id, uint32_t mmu_val, mmu_target_t target)
{
(void)mmu_id;
HAL_ASSERT(target == MMU_TARGET_FLASH0);
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
*(uint32_t *)(DR_REG_MMU_TABLE + entry_id * 4) = mmu_val | MMU_ACCESS_FLASH | MMU_VALID;
}
/**
* Read the raw value from MMU table
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
* @param mmu_val Value to be read from MMU table
*/
__attribute__((always_inline))
static inline uint32_t mmu_ll_read_entry(uint32_t mmu_id, uint32_t entry_id)
{
(void)mmu_id;
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
return *(uint32_t *)(DR_REG_MMU_TABLE + entry_id * 4);
}
/**
* Set MMU table entry as invalid
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
*/
__attribute__((always_inline))
static inline void mmu_ll_set_entry_invalid(uint32_t mmu_id, uint32_t entry_id)
{
(void)mmu_id;
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
*(uint32_t *)(DR_REG_MMU_TABLE + entry_id * 4) = MMU_INVALID;
}
/**
* Unmap all the items in the MMU table
*
* @param mmu_id MMU ID
*/
__attribute__((always_inline))
static inline void mmu_ll_unmap_all(uint32_t mmu_id)
{
for (int i = 0; i < MMU_ENTRY_NUM; i++) {
mmu_ll_set_entry_invalid(mmu_id, i);
}
}
/**
* Check MMU table entry value is valid
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
*
* @return Ture for MMU entry is valid; False for invalid
*/
static inline bool mmu_ll_check_entry_valid(uint32_t mmu_id, uint32_t entry_id)
{
(void)mmu_id;
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
return (*(uint32_t *)(DR_REG_MMU_TABLE + entry_id * 4) & MMU_INVALID) ? false : true;
}
/**
* Get the MMU table entry target
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
*
* @return Target, see `mmu_target_t`
*/
static inline mmu_target_t mmu_ll_get_entry_target(uint32_t mmu_id, uint32_t entry_id)
{
(void)mmu_id;
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
return MMU_TARGET_FLASH0;
}
/**
* Convert MMU entry ID to paddr base
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
*
* @return paddr base
*/
static inline uint32_t mmu_ll_entry_id_to_paddr_base(uint32_t mmu_id, uint32_t entry_id)
{
(void)mmu_id;
HAL_ASSERT(entry_id < MMU_ENTRY_NUM);
return ((*(uint32_t *)(DR_REG_MMU_TABLE + entry_id * 4)) & MMU_VALID_VAL_MASK) << 16;
}
/**
* Find the MMU table entry ID based on table map value
* @note This function can only find the first match entry ID. However it is possible that a physical address
* is mapped to multiple virtual addresses
*
* @param mmu_id MMU ID
* @param mmu_val map value to be read from MMU table standing for paddr
* @param target physical memory target, see `mmu_target_t`
*
* @return MMU entry ID, -1 for invalid
*/
static inline int mmu_ll_find_entry_id_based_on_map_value(uint32_t mmu_id, uint32_t mmu_val, mmu_target_t target)
{
(void)mmu_id;
for (int i = 0; i < MMU_ENTRY_NUM; i++) {
if (mmu_ll_check_entry_valid(mmu_id, i)) {
if (mmu_ll_get_entry_target(mmu_id, i) == target) {
if (((*(uint32_t *)(DR_REG_MMU_TABLE + i * 4)) & MMU_VALID_VAL_MASK) == mmu_val) {
return i;
}
}
}
}
return -1;
}
/**
* Convert MMU entry ID to vaddr base
*
* @param mmu_id MMU ID
* @param entry_id MMU entry ID
* @param type virtual address type, could be instruction type or data type. See `mmu_vaddr_t`
*/
static inline uint32_t mmu_ll_entry_id_to_vaddr_base(uint32_t mmu_id, uint32_t entry_id, mmu_vaddr_t type)
{
(void)mmu_id;
uint32_t laddr = entry_id << 16;
return mmu_ll_laddr_to_vaddr(laddr, type);
}
#ifdef __cplusplus
}
#endif

45
components/hal/esp32h4/include/hal/mpu_ll.h
View File

@ -1,45 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "soc/soc_caps.h"
#ifdef __cplusplus
extern "C" {
#endif
/* This LL is currently unused for ESP32-H4 - IDF-2375 */
static inline uint32_t mpu_ll_id_to_addr(unsigned id)
{
abort();
}
static inline void mpu_ll_set_region_rw(uint32_t addr)
{
abort();
}
static inline void mpu_ll_set_region_rwx(uint32_t addr)
{
abort();
}
static inline void mpu_ll_set_region_x(uint32_t addr)
{
abort();
}
static inline void mpu_ll_set_region_illegal(uint32_t addr)
{
abort();
}
#ifdef __cplusplus
}
#endif

291
components/hal/esp32h4/include/hal/mwdt_ll.h
View File

@ -1,291 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for Timer Group register operations.
// Note that most of the register operations in this layer are non-atomic operations.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "soc/timer_periph.h"
#include "soc/timer_group_struct.h"
#include "hal/wdt_types.h"
#include "hal/assert.h"
#include "esp_attr.h"
#include "esp_assert.h"
#include "hal/misc.h"
/* Pre-calculated prescaler to achieve 500 ticks/us (MWDT1_TICKS_PER_US) when using default clock (MWDT_CLK_SRC_DEFAULT ) */
#define MWDT_LL_DEFAULT_CLK_PRESCALER 40000
//Type check wdt_stage_action_t
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_OFF == TIMG_WDT_STG_SEL_OFF, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_INT == TIMG_WDT_STG_SEL_INT, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_RESET_CPU == TIMG_WDT_STG_SEL_RESET_CPU, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_RESET_SYSTEM == TIMG_WDT_STG_SEL_RESET_SYSTEM, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
//Type check wdt_reset_sig_length_t
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_100ns == TIMG_WDT_RESET_LENGTH_100_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_200ns == TIMG_WDT_RESET_LENGTH_200_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_300ns == TIMG_WDT_RESET_LENGTH_300_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_400ns == TIMG_WDT_RESET_LENGTH_400_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_500ns == TIMG_WDT_RESET_LENGTH_500_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_800ns == TIMG_WDT_RESET_LENGTH_800_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_1_6us == TIMG_WDT_RESET_LENGTH_1600_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_3_2us == TIMG_WDT_RESET_LENGTH_3200_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
/**
* @brief Enable the MWDT
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void mwdt_ll_enable(timg_dev_t *hw)
{
hw->wdtconfig0.wdt_en = 1;
}
/**
* @brief Disable the MWDT
*
* @param hw Start address of the peripheral registers.
* @note This function does not disable the flashboot mode. Therefore, given that
* the MWDT is disabled using this function, a timeout can still occur
* if the flashboot mode is simultaneously enabled.
*/
FORCE_INLINE_ATTR void mwdt_ll_disable(timg_dev_t *hw)
{
hw->wdtconfig0.wdt_en = 0;
}
/**
* Check if the MWDT is enabled
*
* @param hw Start address of the peripheral registers.
* @return True if the MWDT is enabled, false otherwise
*/
FORCE_INLINE_ATTR bool mwdt_ll_check_if_enabled(timg_dev_t *hw)
{
return (hw->wdtconfig0.wdt_en) ? true : false;
}
/**
* @brief Configure a particular stage of the MWDT
*
* @param hw Start address of the peripheral registers.
* @param stage Which stage to configure
* @param timeout Number of timer ticks for the stage to timeout
* @param behavior What action to take when the stage times out
*/
FORCE_INLINE_ATTR void mwdt_ll_config_stage(timg_dev_t *hw, wdt_stage_t stage, uint32_t timeout, wdt_stage_action_t behavior)
{
switch (stage) {
case WDT_STAGE0:
hw->wdtconfig0.wdt_stg0 = behavior;
hw->wdtconfig2.wdt_stg0_hold = timeout;
break;
case WDT_STAGE1:
hw->wdtconfig0.wdt_stg1 = behavior;
hw->wdtconfig3.wdt_stg1_hold = timeout;
break;
case WDT_STAGE2:
hw->wdtconfig0.wdt_stg2 = behavior;
hw->wdtconfig4.wdt_stg2_hold = timeout;
break;
case WDT_STAGE3:
hw->wdtconfig0.wdt_stg3 = behavior;
hw->wdtconfig5.wdt_stg3_hold = timeout;
break;
default:
HAL_ASSERT(false && "unsupported WDT stage");
break;
}
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Disable a particular stage of the MWDT
*
* @param hw Start address of the peripheral registers.
* @param stage Which stage to disable
*/
FORCE_INLINE_ATTR void mwdt_ll_disable_stage(timg_dev_t *hw, uint32_t stage)
{
switch (stage) {
case WDT_STAGE0:
hw->wdtconfig0.wdt_stg0 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE1:
hw->wdtconfig0.wdt_stg1 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE2:
hw->wdtconfig0.wdt_stg2 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE3:
hw->wdtconfig0.wdt_stg3 = WDT_STAGE_ACTION_OFF;
break;
default:
HAL_ASSERT(false && "unsupported WDT stage");
break;
}
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Set the length of the CPU reset action
*
* @param hw Start address of the peripheral registers.
* @param length Length of CPU reset signal
*/
FORCE_INLINE_ATTR void mwdt_ll_set_cpu_reset_length(timg_dev_t *hw, wdt_reset_sig_length_t length)
{
hw->wdtconfig0.wdt_cpu_reset_length = length;
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Set the length of the system reset action
*
* @param hw Start address of the peripheral registers.
* @param length Length of system reset signal
*/
FORCE_INLINE_ATTR void mwdt_ll_set_sys_reset_length(timg_dev_t *hw, wdt_reset_sig_length_t length)
{
hw->wdtconfig0.wdt_sys_reset_length = length;
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Enable/Disable the MWDT flashboot mode.
*
* @param hw Beginning address of the peripheral registers.
* @param enable True to enable WDT flashboot mode, false to disable WDT flashboot mode.
*
* @note Flashboot mode is independent and can trigger a WDT timeout event if the
* WDT's enable bit is set to 0. Flashboot mode for TG0 is automatically enabled
* on flashboot, and should be disabled by software when flashbooting completes.
*/
FORCE_INLINE_ATTR void mwdt_ll_set_flashboot_en(timg_dev_t *hw, bool enable)
{
hw->wdtconfig0.wdt_flashboot_mod_en = (enable) ? 1 : 0;
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Set the clock prescaler of the MWDT
*
* @param hw Start address of the peripheral registers.
* @param prescaler Prescaler value between 1 to 65535
*/
FORCE_INLINE_ATTR void mwdt_ll_set_prescaler(timg_dev_t *hw, uint32_t prescaler)
{
// In case the compiler optimise a 32bit instruction (e.g. s32i) into 8/16bit instruction (e.g. s8i, which is not allowed to access a register)
// We take care of the "read-modify-write" procedure by ourselves.
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->wdtconfig1, wdt_clk_prescale, prescaler);
//Config registers are updated asynchronously
hw->wdtconfig0.wdt_conf_update_en = 1;
}
/**
* @brief Feed the MWDT
*
* Resets the current timer count and current stage.
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void mwdt_ll_feed(timg_dev_t *hw)
{
hw->wdtfeed.wdt_feed = 1;
}
/**
* @brief Enable write protection of the MWDT registers
*
* Locking the MWDT will prevent any of the MWDT's registers from being modified
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void mwdt_ll_write_protect_enable(timg_dev_t *hw)
{
hw->wdtwprotect.wdt_wkey = 0;
}
/**
* @brief Disable write protection of the MWDT registers
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void mwdt_ll_write_protect_disable(timg_dev_t *hw)
{
hw->wdtwprotect.wdt_wkey = TIMG_WDT_WKEY_VALUE;
}
/**
* @brief Clear the MWDT interrupt status.
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void mwdt_ll_clear_intr_status(timg_dev_t *hw)
{
hw->int_clr_timers.wdt_int_clr = 1;
}
/**
* @brief Set the interrupt enable bit for the MWDT interrupt.
*
* @param hw Beginning address of the peripheral registers.
* @param enable Whether to enable the MWDT interrupt
*/
FORCE_INLINE_ATTR void mwdt_ll_set_intr_enable(timg_dev_t *hw, bool enable)
{
hw->int_ena_timers.wdt_int_ena = (enable) ? 1 : 0;
}
/**
* @brief Set the clock source for the MWDT.
*
* @param hw Beginning address of the peripheral registers.
* @param clk_src Clock source
*/
FORCE_INLINE_ATTR void mwdt_ll_set_clock_source(timg_dev_t *hw, mwdt_clock_source_t clk_src)
{
switch (clk_src) {
case MWDT_CLK_SRC_APB:
hw->wdtconfig0.wdt_use_xtal = 0;
break;
case MWDT_CLK_SRC_XTAL:
hw->wdtconfig0.wdt_use_xtal = 1;
break;
default:
HAL_ASSERT(false);
break;
}
}
/**
* @brief Enable MWDT module clock
*
* @param hw Beginning address of the peripheral registers.
* @param en true to enable, false to disable
*/
__attribute__((always_inline))
static inline void mwdt_ll_enable_clock(timg_dev_t *hw, bool en)
{
hw->regclk.wdt_clk_is_active = en;
}
#ifdef __cplusplus
}
#endif

87
components/hal/esp32h4/include/hal/regi2c_ctrl_ll.h
View File

@ -1,87 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include "soc/soc.h"
#include "soc/regi2c_defs.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Reset (Disable) the I2C internal bus for all regi2c registers
*/
static inline void regi2c_ctrl_ll_i2c_reset(void)
{
// On ESP32-H4, don't need to do anything (indeed do need? not fully supported yet?)
// SET_PERI_REG_BITS(ANA_CONFIG_REG, ANA_CONFIG_M, ANA_CONFIG_M, ANA_CONFIG_S);
}
/**
* @brief Enable the I2C internal bus to do I2C read/write operation to the BBPLL configuration register
*/
static inline void regi2c_ctrl_ll_i2c_bbpll_enable(void)
{
// On ESP32-H4, don't need to do anything (indeed do need? not fully supported yet?)
// CLEAR_PERI_REG_MASK(ANA_CONFIG_REG, ANA_I2C_BBPLL_M);
}
/**
* @brief Start BBPLL self-calibration
*/
static inline __attribute__((always_inline)) void regi2c_ctrl_ll_bbpll_calibration_start(void)
{
REG_CLR_BIT(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH);
REG_SET_BIT(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW);
}
/**
* @brief Stop BBPLL self-calibration
*
* This helps to prevent BBPLL jitter (phenomenon is significant on ESP32H4)
*/
static inline __attribute__((always_inline)) void regi2c_ctrl_ll_bbpll_calibration_stop(void)
{
REG_CLR_BIT(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW);
REG_SET_BIT(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH);
}
/**
* @brief Check whether BBPLL calibration is done
*
* @return True if calibration is done; otherwise false
*/
static inline __attribute__((always_inline)) bool regi2c_ctrl_ll_bbpll_calibration_is_done(void)
{
return REG_GET_BIT(I2C_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE);
}
/**
* @brief Enable the I2C internal bus to do I2C read/write operation to the SAR_ADC register
*/
static inline void regi2c_ctrl_ll_i2c_saradc_enable(void)
{
CLEAR_PERI_REG_MASK(ANA_CONFIG_REG, ANA_I2C_SAR_FORCE_PD);
SET_PERI_REG_MASK(ANA_CONFIG2_REG, ANA_I2C_SAR_FORCE_PU);
}
/**
* @brief Disable the I2C internal bus to do I2C read/write operation to the SAR_ADC register
*/
static inline void regi2c_ctrl_ll_i2c_saradc_disable(void)
{
CLEAR_PERI_REG_MASK(ANA_CONFIG_REG, ANA_I2C_SAR_FORCE_PU);
SET_PERI_REG_MASK(ANA_CONFIG2_REG, ANA_I2C_SAR_FORCE_PD);
}
#ifdef __cplusplus
}
#endif

834
components/hal/esp32h4/include/hal/rmt_ll.h
View File

@ -1,834 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @note TX and RX channels are index from 0 in the LL driver, i.e. tx_channel = [0,1], rx_channel = [0,1]
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include <stddef.h>
#include "hal/misc.h"
#include "hal/assert.h"
#include "soc/rmt_struct.h"
#include "hal/rmt_types.h"
#ifdef __cplusplus
extern "C" {
#endif
#define RMT_LL_EVENT_TX_DONE(channel) (1 << (channel))
#define RMT_LL_EVENT_TX_THRES(channel) (1 << ((channel) + 8))
#define RMT_LL_EVENT_TX_LOOP_END(channel) (1 << ((channel) + 12))
#define RMT_LL_EVENT_TX_ERROR(channel) (1 << ((channel) + 4))
#define RMT_LL_EVENT_RX_DONE(channel) (1 << ((channel) + 2))
#define RMT_LL_EVENT_RX_THRES(channel) (1 << ((channel) + 10))
#define RMT_LL_EVENT_RX_ERROR(channel) (1 << ((channel) + 6))
#define RMT_LL_EVENT_TX_MASK(channel) (RMT_LL_EVENT_TX_DONE(channel) | RMT_LL_EVENT_TX_THRES(channel) | RMT_LL_EVENT_TX_LOOP_END(channel))
#define RMT_LL_EVENT_RX_MASK(channel) (RMT_LL_EVENT_RX_DONE(channel) | RMT_LL_EVENT_RX_THRES(channel))
#define RMT_LL_MAX_LOOP_COUNT_PER_BATCH 1023
typedef enum {
RMT_LL_MEM_OWNER_SW = 0,
RMT_LL_MEM_OWNER_HW = 1,
} rmt_ll_mem_owner_t;
/**
* @brief Enable clock gate for register and memory
*
* @param dev Peripheral instance address
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_enable_periph_clock(rmt_dev_t *dev, bool enable)
{
dev->sys_conf.clk_en = enable; // register clock gating
dev->sys_conf.mem_clk_force_on = enable; // memory clock gating
}
/**
* @brief Power down memory
*
* @param dev Peripheral instance address
* @param enable True to power down, False to power up
*/
static inline void rmt_ll_power_down_mem(rmt_dev_t *dev, bool enable)
{
dev->sys_conf.mem_force_pu = !enable;
dev->sys_conf.mem_force_pd = enable;
}
/**
* @brief Enable APB accessing RMT memory in nonfifo mode
*
* @param dev Peripheral instance address
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_enable_mem_access_nonfifo(rmt_dev_t *dev, bool enable)
{
dev->sys_conf.fifo_mask = enable;
}
/**
* @brief Set clock source and divider for RMT channel group
*
* @param dev Peripheral instance address
* @param channel not used as clock source is set for all channels
* @param src Clock source
* @param divider_integral Integral part of the divider
* @param divider_denominator Denominator part of the divider
* @param divider_numerator Numerator part of the divider
*/
static inline void rmt_ll_set_group_clock_src(rmt_dev_t *dev, uint32_t channel, rmt_clock_source_t src,
uint32_t divider_integral, uint32_t divider_denominator, uint32_t divider_numerator)
{
// Formula: rmt_sclk = module_clock_src / (1 + div_num + div_a / div_b)
(void)channel; // the source clock is set for all channels
HAL_ASSERT(divider_integral >= 1);
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->sys_conf, sclk_div_num, divider_integral - 1);
dev->sys_conf.sclk_div_a = divider_numerator;
dev->sys_conf.sclk_div_b = divider_denominator;
switch (src) {
case RMT_CLK_SRC_AHB:
dev->sys_conf.sclk_sel = 1;
break;
case RMT_CLK_SRC_XTAL:
dev->sys_conf.sclk_sel = 3;
break;
default:
HAL_ASSERT(false && "unsupported RMT clock source");
break;
}
}
/**
* @brief Enable RMT peripheral source clock
*
* @param dev Peripheral instance address
* @param en True to enable, False to disable
*/
static inline void rmt_ll_enable_group_clock(rmt_dev_t *dev, bool en)
{
dev->sys_conf.sclk_active = en;
}
////////////////////////////////////////TX Channel Specific/////////////////////////////////////////////////////////////
/**
* @brief Reset clock divider for TX channels by mask
*
* @param dev Peripheral instance address
* @param channel_mask Mask of TX channels
*/
static inline void rmt_ll_tx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
{
// write 1 to reset
dev->ref_cnt_rst.val |= channel_mask & 0x03;
}
/**
* @brief Set TX channel clock divider
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param div Division value
*/
static inline void rmt_ll_tx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
{
HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
// limit the maximum divider to 256
if (div >= 256) {
div = 0; // 0 means 256 division
}
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->tx_conf[channel], div_cnt, div);
}
/**
* @brief Reset RMT reading pointer for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
{
dev->tx_conf[channel].mem_rd_rst = 1;
dev->tx_conf[channel].mem_rd_rst = 0;
dev->tx_conf[channel].mem_rst = 1;
dev->tx_conf[channel].mem_rst = 0;
}
/**
* @brief Start transmitting for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_start(rmt_dev_t *dev, uint32_t channel)
{
// update other configuration registers before start transmitting
dev->tx_conf[channel].conf_update = 1;
dev->tx_conf[channel].tx_start = 1;
}
/**
* @brief Stop transmitting for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_stop(rmt_dev_t *dev, uint32_t channel)
{
dev->tx_conf[channel].tx_stop = 1;
// stop won't take place until configurations updated
dev->tx_conf[channel].conf_update = 1;
}
/**
* @brief Set memory block number for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param block_num memory block number
*/
static inline void rmt_ll_tx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
{
dev->tx_conf[channel].mem_size = block_num;
}
/**
* @brief Enable TX wrap
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_tx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->tx_conf[channel].mem_tx_wrap_en = enable;
}
/**
* @brief Enable transmitting in a loop
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param enable True to enable, False to disable
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_enable_loop(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->tx_conf[channel].tx_conti_mode = enable;
}
/**
* @brief Set loop count for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param count TX loop count
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_set_loop_count(rmt_dev_t *dev, uint32_t channel, uint32_t count)
{
HAL_ASSERT(count <= RMT_LL_MAX_LOOP_COUNT_PER_BATCH && "loop count out of range");
dev->tx_lim[channel].tx_loop_num = count;
}
/**
* @brief Reset loop count for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_reset_loop_count(rmt_dev_t *dev, uint32_t channel)
{
dev->tx_lim[channel].loop_count_reset = 1;
dev->tx_lim[channel].loop_count_reset = 0;
}
/**
* @brief Enable loop count for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param enable True to enable, False to disable
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_enable_loop_count(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->tx_lim[channel].tx_loop_cnt_en = enable;
}
/**
* @brief Enable transmit multiple channels synchronously
*
* @param dev Peripheral instance address
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_tx_enable_sync(rmt_dev_t *dev, bool enable)
{
dev->tx_sim.en = enable;
}
/**
* @brief Clear the TX channels synchronous group
*
* @param dev Peripheral instance address
*/
static inline void rmt_ll_tx_clear_sync_group(rmt_dev_t *dev)
{
dev->tx_sim.val &= ~(0x03);
}
/**
* @brief Add TX channels to the synchronous group
*
* @param dev Peripheral instance address
* @param channel_mask Mask of TX channels to be added to the synchronous group
*/
static inline void rmt_ll_tx_sync_group_add_channels(rmt_dev_t *dev, uint32_t channel_mask)
{
dev->tx_sim.val |= (channel_mask & 0x03);
}
/**
* @brief Remove TX channels from the synchronous group
*
* @param dev Peripheral instance address
* @param channel_mask Mask of TX channels to be removed from the synchronous group
*/
static inline void rmt_ll_tx_sync_group_remove_channels(rmt_dev_t *dev, uint32_t channel_mask)
{
dev->tx_sim.val &= ~channel_mask;
}
/**
* @brief Fix the output level when TX channel is in IDLE state
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param level IDLE level (1 => high, 0 => low)
* @param enable True to fix the IDLE level, otherwise the IDLE level is determined by EOF encoder
*/
__attribute__((always_inline))
static inline void rmt_ll_tx_fix_idle_level(rmt_dev_t *dev, uint32_t channel, uint8_t level, bool enable)
{
dev->tx_conf[channel].idle_out_en = enable;
dev->tx_conf[channel].idle_out_lv = level;
}
/**
* @brief Set the amount of RMT symbols that can trigger the limitation interrupt
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param limit Specify the number of symbols
*/
static inline void rmt_ll_tx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
{
dev->tx_lim[channel].limit = limit;
}
/**
* @brief Set high and low duration of carrier signal
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param high_ticks Duration of high level
* @param low_ticks Duration of low level
*/
static inline void rmt_ll_tx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
{
HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
// ticks=0 means 65536 in hardware
if (high_ticks >= 65536) {
high_ticks = 0;
}
if (low_ticks >= 65536) {
low_ticks = 0;
}
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->tx_carrier[channel], high, high_ticks);
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->tx_carrier[channel], low, low_ticks);
}
/**
* @brief Enable modulating carrier signal to TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_tx_enable_carrier_modulation(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->tx_conf[channel].carrier_en = enable;
}
/**
* @brief Set on high or low to modulate the carrier signal
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param level Which level to modulate on (0=>low level, 1=>high level)
*/
static inline void rmt_ll_tx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
{
dev->tx_conf[channel].carrier_out_lv = level;
}
/**
* @brief Enable to always output carrier signal, regardless of a valid data transmission
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @param enable True to output carrier signal in all RMT state, False to only ouput carrier signal for effective data
*/
static inline void rmt_ll_tx_enable_carrier_always_on(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->tx_conf[channel].carrier_eff_en = !enable;
}
////////////////////////////////////////RX Channel Specific/////////////////////////////////////////////////////////////
/**
* @brief Reset clock divider for RX channels by mask
*
* @param dev Peripheral instance address
* @param channel_mask Mask of RX channels
*/
static inline void rmt_ll_rx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
{
// write 1 to reset
dev->ref_cnt_rst.val |= ((channel_mask & 0x03) << 2);
}
/**
* @brief Set RX channel clock divider
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param div Division value
*/
static inline void rmt_ll_rx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
{
HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
// limit the maximum divider to 256
if (div >= 256) {
div = 0; // 0 means 256 division
}
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->rx_conf[channel].conf0, div_cnt, div);
}
/**
* @brief Reset RMT writing pointer for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
*/
static inline void rmt_ll_rx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
{
dev->rx_conf[channel].conf1.mem_wr_rst = 1;
dev->rx_conf[channel].conf1.mem_wr_rst = 0;
dev->rx_conf[channel].conf1.mem_rst = 1;
dev->rx_conf[channel].conf1.mem_rst = 0;
}
/**
* @brief Enable receiving for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param enable True to enable, False to disable
*/
__attribute__((always_inline))
static inline void rmt_ll_rx_enable(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->rx_conf[channel].conf1.rx_en = enable;
// rx won't be enabled until configurations updated
dev->rx_conf[channel].conf1.conf_update = 1;
}
/**
* @brief Set memory block number for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param block_num memory block number
*/
static inline void rmt_ll_rx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
{
dev->rx_conf[channel].conf0.mem_size = block_num;
}
/**
* @brief Set the time length for RX channel before going into IDLE state
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param thres Time length threshold
*/
static inline void rmt_ll_rx_set_idle_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
{
dev->rx_conf[channel].conf0.idle_thres = thres;
}
/**
* @brief Set RMT memory owner for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param owner Memory owner
*/
__attribute__((always_inline))
static inline void rmt_ll_rx_set_mem_owner(rmt_dev_t *dev, uint32_t channel, rmt_ll_mem_owner_t owner)
{
dev->rx_conf[channel].conf1.mem_owner = owner;
}
/**
* @brief Enable filter for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX chanenl number
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_rx_enable_filter(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->rx_conf[channel].conf1.rx_filter_en = enable;
}
/**
* @brief Set RX channel filter threshold (i.e. the maximum width of one pulse signal that would be treated as a noise)
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param thres Filter threshold
*/
static inline void rmt_ll_rx_set_filter_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->rx_conf[channel].conf1, rx_filter_thres, thres);
}
/**
* @brief Get RMT memory write cursor offset
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @return writer offset
*/
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_memory_writer_offset(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_status[channel].mem_waddr_ex - (channel + 2) * 48;
}
/**
* @brief Set the amount of RMT symbols that can trigger the limitation interrupt
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param limit Specify the number of symbols
*/
static inline void rmt_ll_rx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
{
dev->rx_lim[channel].rx_lim = limit;
}
/**
* @brief Set high and low duration of carrier signal
*
* @param dev dev Peripheral instance address
* @param channel RMT TX channel number
* @param high_ticks Duration of high level
* @param low_ticks Duration of low level
*/
static inline void rmt_ll_rx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
{
HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->rx_carrier[channel], high_thres, high_ticks - 1);
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->rx_carrier[channel], low_thres, low_ticks - 1);
}
/**
* @brief Enable demodulating the carrier on RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_rx_enable_carrier_demodulation(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->rx_conf[channel].conf0.carrier_en = enable;
}
/**
* @brief Set on high or low to demodulate the carrier signal
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param level Which level to demodulate (0=>low level, 1=>high level)
*/
static inline void rmt_ll_rx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
{
dev->rx_conf[channel].conf0.carrier_out_lv = level;
}
/**
* @brief Enable RX wrap
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @param enable True to enable, False to disable
*/
static inline void rmt_ll_rx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
{
dev->rx_conf[channel].conf1.mem_rx_wrap_en = enable;
}
//////////////////////////////////////////Interrupt Specific////////////////////////////////////////////////////////////
/**
* @brief Enable RMT interrupt for specific event mask
*
* @param dev Peripheral instance address
* @param mask Event mask
* @param enable True to enable, False to disable
*/
__attribute__((always_inline))
static inline void rmt_ll_enable_interrupt(rmt_dev_t *dev, uint32_t mask, bool enable)
{
if (enable) {
dev->int_ena.val |= mask;
} else {
dev->int_ena.val &= ~mask;
}
}
/**
* @brief Clear RMT interrupt status by mask
*
* @param dev Peripheral instance address
* @param mask Interupt status mask
*/
__attribute__((always_inline))
static inline void rmt_ll_clear_interrupt_status(rmt_dev_t *dev, uint32_t mask)
{
dev->int_clr.val = mask;
}
/**
* @brief Get interrupt status register address
*
* @param dev Peripheral instance address
* @return Register address
*/
static inline volatile void *rmt_ll_get_interrupt_status_reg(rmt_dev_t *dev)
{
return &dev->int_st;
}
/**
* @brief Get interrupt status for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @return Interrupt status
*/
__attribute__((always_inline))
static inline uint32_t rmt_ll_tx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
{
return dev->int_st.val & RMT_LL_EVENT_TX_MASK(channel);
}
/**
* @brief Get interrupt raw status for TX channel
*
* @param dev Peripheral instance address
* @param channel RMT TX channel number
* @return Interrupt raw status
*/
static inline uint32_t rmt_ll_tx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
{
return dev->int_raw.val & (RMT_LL_EVENT_TX_MASK(channel) | RMT_LL_EVENT_TX_ERROR(channel));
}
/**
* @brief Get interrupt raw status for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @return Interrupt raw status
*/
static inline uint32_t rmt_ll_rx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
{
return dev->int_raw.val & (RMT_LL_EVENT_RX_MASK(channel) | RMT_LL_EVENT_RX_ERROR(channel));
}
/**
* @brief Get interrupt status for RX channel
*
* @param dev Peripheral instance address
* @param channel RMT RX channel number
* @return Interrupt status
*/
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
{
return dev->int_st.val & RMT_LL_EVENT_RX_MASK(channel);
}
//////////////////////////////////////////Deprecated Functions//////////////////////////////////////////////////////////
/////////////////////////////The following functions are only used by the legacy driver/////////////////////////////////
/////////////////////////////They might be removed in the next major release (ESP-IDF 6.0)//////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
__attribute__((always_inline))
static inline uint32_t rmt_ll_tx_get_status_word(rmt_dev_t *dev, uint32_t channel)
{
return dev->tx_status[channel].val;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_status_word(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_status[channel].val;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_tx_get_channel_clock_div(rmt_dev_t *dev, uint32_t channel)
{
uint32_t div = HAL_FORCE_READ_U32_REG_FIELD(dev->tx_conf[channel], div_cnt);
return div == 0 ? 256 : div;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_channel_clock_div(rmt_dev_t *dev, uint32_t channel)
{
uint32_t div = HAL_FORCE_READ_U32_REG_FIELD(dev->rx_conf[channel].conf0, div_cnt);
return div == 0 ? 256 : div;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_idle_thres(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_conf[channel].conf0.idle_thres;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_tx_get_mem_blocks(rmt_dev_t *dev, uint32_t channel)
{
return dev->tx_conf[channel].mem_size;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_mem_blocks(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_conf[channel].conf0.mem_size;
}
__attribute__((always_inline))
static inline bool rmt_ll_tx_is_loop_enabled(rmt_dev_t *dev, uint32_t channel)
{
return dev->tx_conf[channel].tx_conti_mode;
}
__attribute__((always_inline))
static inline rmt_clock_source_t rmt_ll_get_group_clock_src(rmt_dev_t *dev, uint32_t channel)
{
rmt_clock_source_t clk_src = RMT_CLK_SRC_AHB;
switch (dev->sys_conf.sclk_sel) {
case 1:
clk_src = RMT_CLK_SRC_AHB;
break;
case 3:
clk_src = RMT_CLK_SRC_XTAL;
break;
}
return clk_src;
}
__attribute__((always_inline))
static inline bool rmt_ll_tx_is_idle_enabled(rmt_dev_t *dev, uint32_t channel)
{
return dev->tx_conf[channel].idle_out_en;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_tx_get_idle_level(rmt_dev_t *dev, uint32_t channel)
{
return dev->tx_conf[channel].idle_out_lv;
}
static inline bool rmt_ll_is_mem_powered_down(rmt_dev_t *dev)
{
// the RTC domain can also power down RMT memory
// so it's probably not enough to detect whether it's powered down or not
// mem_force_pd has higher priority than mem_force_pu
return (dev->sys_conf.mem_force_pd) || !(dev->sys_conf.mem_force_pu);
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_mem_owner(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_conf[channel].conf1.mem_owner;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_rx_get_limit(rmt_dev_t *dev, uint32_t channel)
{
return dev->rx_lim[channel].rx_lim;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_tx_end_interrupt_status(rmt_dev_t *dev)
{
return dev->int_st.val & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_rx_end_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 2) & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_tx_err_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 4) & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_rx_err_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 6) & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_tx_thres_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 8) & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_rx_thres_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 10) & 0x03;
}
__attribute__((always_inline))
static inline uint32_t rmt_ll_get_tx_loop_interrupt_status(rmt_dev_t *dev)
{
return (dev->int_st.val >> 12) & 0x03;
}
#ifdef __cplusplus
}
#endif

85
components/hal/esp32h4/include/hal/rtc_cntl_ll.h
View File

@ -1,85 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/syscon_reg.h"
#include "esp_attr.h"
#ifdef __cplusplus
extern "C" {
#endif
FORCE_INLINE_ATTR void rtc_cntl_ll_set_wakeup_timer(uint64_t t)
{
WRITE_PERI_REG(RTC_CNTL_SLP_TIMER0_REG, t & UINT32_MAX);
WRITE_PERI_REG(RTC_CNTL_SLP_TIMER1_REG, t >> 32);
SET_PERI_REG_MASK(RTC_CNTL_INT_CLR_REG, RTC_CNTL_MAIN_TIMER_INT_CLR_M);
SET_PERI_REG_MASK(RTC_CNTL_SLP_TIMER1_REG, RTC_CNTL_MAIN_TIMER_ALARM_EN_M);
}
FORCE_INLINE_ATTR uint32_t rtc_cntl_ll_gpio_get_wakeup_status(void)
{
return GET_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_WAKEUP_STATUS);
}
FORCE_INLINE_ATTR void rtc_cntl_ll_gpio_clear_wakeup_status(void)
{
REG_SET_BIT(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_WAKEUP_STATUS_CLR);
REG_CLR_BIT(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_WAKEUP_STATUS_CLR);
}
FORCE_INLINE_ATTR void rtc_cntl_ll_enable_cpu_retention(uint32_t addr)
{
// ESP32H4-TODO: IDF-3383
}
FORCE_INLINE_ATTR void rtc_cntl_ll_disable_cpu_retention(void)
{
// ESP32H4-TODO: IDF-3383
}
FORCE_INLINE_ATTR void rtc_cntl_ll_reset_system(void)
{
REG_WRITE(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_SW_SYS_RST);
}
FORCE_INLINE_ATTR void rtc_cntl_ll_reset_cpu(int cpu_no)
{
REG_WRITE(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_SW_PROCPU_RST);
}
FORCE_INLINE_ATTR void rtc_cntl_ll_sleep_enable(void)
{
SET_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_SLEEP_EN);
}
FORCE_INLINE_ATTR uint64_t rtc_cntl_ll_get_rtc_time(void)
{
SET_PERI_REG_MASK(RTC_CNTL_TIME_UPDATE_REG, RTC_CNTL_TIME_UPDATE);
uint64_t t = READ_PERI_REG(RTC_CNTL_TIME0_REG);
t |= ((uint64_t) READ_PERI_REG(RTC_CNTL_TIME1_REG)) << 32;
return t;
}
FORCE_INLINE_ATTR uint64_t rtc_cntl_ll_time_to_count(uint64_t time_in_us)
{
uint32_t slow_clk_value = REG_READ(RTC_CNTL_STORE1_REG);
return ((time_in_us * (1 << RTC_CLK_CAL_FRACT)) / slow_clk_value);
}
FORCE_INLINE_ATTR uint32_t rtc_cntl_ll_get_wakeup_cause(void)
{
return REG_GET_FIELD(RTC_CNTL_SLP_WAKEUP_CAUSE_REG, RTC_CNTL_WAKEUP_CAUSE);
}
#ifdef __cplusplus
}
#endif

307
components/hal/esp32h4/include/hal/rwdt_ll.h
View File

@ -1,307 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdlib.h>
#include <stdbool.h>
#include "hal/misc.h"
#include "hal/wdt_types.h"
#include "soc/rtc_cntl_periph.h"
#include "soc/rtc_cntl_struct.h"
#include "hal/efuse_ll.h"
#include "esp_attr.h"
#include "esp_assert.h"
//Type check wdt_stage_action_t
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_OFF == RTC_WDT_STG_SEL_OFF, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_INT == RTC_WDT_STG_SEL_INT, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_RESET_CPU == RTC_WDT_STG_SEL_RESET_CPU, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_RESET_SYSTEM == RTC_WDT_STG_SEL_RESET_SYSTEM, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
ESP_STATIC_ASSERT(WDT_STAGE_ACTION_RESET_RTC == RTC_WDT_STG_SEL_RESET_RTC, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_stage_action_t");
//Type check wdt_reset_sig_length_t
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_100ns == RTC_WDT_RESET_LENGTH_100_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_200ns == RTC_WDT_RESET_LENGTH_200_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_300ns == RTC_WDT_RESET_LENGTH_300_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_400ns == RTC_WDT_RESET_LENGTH_400_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_500ns == RTC_WDT_RESET_LENGTH_500_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_800ns == RTC_WDT_RESET_LENGTH_800_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_1_6us == RTC_WDT_RESET_LENGTH_1600_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
ESP_STATIC_ASSERT(WDT_RESET_SIG_LENGTH_3_2us == RTC_WDT_RESET_LENGTH_3200_NS, "Add mapping to LL watchdog timeout behavior, since it's no longer naturally compatible with wdt_reset_sig_length_t");
typedef rtc_cntl_dev_t rwdt_dev_t;
#define RWDT_DEV_GET() &RTCCNTL
/**
* @brief Enable the RWDT
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void rwdt_ll_enable(rtc_cntl_dev_t *hw)
{
hw->wdt_config0.en = 1;
}
/**
* @brief Disable the RWDT
*
* @param hw Start address of the peripheral registers.
* @note This function does not disable the flashboot mode. Therefore, given that
* the MWDT is disabled using this function, a timeout can still occur
* if the flashboot mode is simultaneously enabled.
*/
FORCE_INLINE_ATTR void rwdt_ll_disable(rtc_cntl_dev_t *hw)
{
hw->wdt_config0.en = 0;
}
/**
* @brief Check if the RWDT is enabled
*
* @param hw Start address of the peripheral registers.
* @return True if RTC WDT is enabled
*/
FORCE_INLINE_ATTR bool rwdt_ll_check_if_enabled(rtc_cntl_dev_t *hw)
{
return (hw->wdt_config0.en) ? true : false;
}
/**
* @brief Configure a particular stage of the RWDT
*
* @param hw Start address of the peripheral registers.
* @param stage Which stage to configure
* @param timeout Number of timer ticks for the stage to timeout (see note).
* @param behavior What action to take when the stage times out
*
* @note The value of of RWDT stage 0 timeout register is special, in
* that an implicit multiplier is applied to that value to produce
* and effective timeout tick value. The multiplier is dependent
* on an EFuse value. Therefore, when configuring stage 0, the valid
* values for the timeout argument are:
* - If Efuse value is 0, any even number between [2,2*UINT32_MAX]
* - If Efuse value is 1, any multiple of 4 between [4,4*UINT32_MAX]
* - If Efuse value is 2, any multiple of 8 between [8,8*UINT32_MAX]
* - If Efuse value is 3, any multiple of 16 between [16,16*UINT32_MAX]
*/
FORCE_INLINE_ATTR void rwdt_ll_config_stage(rtc_cntl_dev_t *hw, wdt_stage_t stage, uint32_t timeout_ticks, wdt_stage_action_t behavior)
{
switch (stage) {
case WDT_STAGE0:
hw->wdt_config0.stg0 = behavior;
//Account of implicty multiplier applied to stage 0 timeout tick config value
hw->wdt_config1 = timeout_ticks >> (1 + efuse_ll_get_wdt_delay_sel());
break;
case WDT_STAGE1:
hw->wdt_config0.stg1 = behavior;
hw->wdt_config2 = timeout_ticks;
break;
case WDT_STAGE2:
hw->wdt_config0.stg2 = behavior;
hw->wdt_config3 = timeout_ticks;
break;
case WDT_STAGE3:
hw->wdt_config0.stg3 = behavior;
hw->wdt_config4 = timeout_ticks;
break;
default:
abort();
}
}
/**
* @brief Disable a particular stage of the RWDT
*
* @param hw Start address of the peripheral registers.
* @param stage Which stage to disable
*/
FORCE_INLINE_ATTR void rwdt_ll_disable_stage(rtc_cntl_dev_t *hw, wdt_stage_t stage)
{
switch (stage) {
case WDT_STAGE0:
hw->wdt_config0.stg0 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE1:
hw->wdt_config0.stg1 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE2:
hw->wdt_config0.stg2 = WDT_STAGE_ACTION_OFF;
break;
case WDT_STAGE3:
hw->wdt_config0.stg3 = WDT_STAGE_ACTION_OFF;
break;
default:
abort();
}
}
/**
* @brief Set the length of the CPU reset action
*
* @param hw Start address of the peripheral registers.
* @param length Length of CPU reset signal
*/
FORCE_INLINE_ATTR void rwdt_ll_set_cpu_reset_length(rtc_cntl_dev_t *hw, wdt_reset_sig_length_t length)
{
hw->wdt_config0.cpu_reset_length = length;
}
/**
* @brief Set the length of the system reset action
*
* @param hw Start address of the peripheral registers.
* @param length Length of system reset signal
*/
FORCE_INLINE_ATTR void rwdt_ll_set_sys_reset_length(rtc_cntl_dev_t *hw, wdt_reset_sig_length_t length)
{
hw->wdt_config0.sys_reset_length = length;
}
/**
* @brief Enable/Disable the RWDT flashboot mode.
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable RWDT flashboot mode, false to disable RWDT flashboot mode.
*
* @note Flashboot mode is independent and can trigger a WDT timeout event if the
* WDT's enable bit is set to 0. Flashboot mode for RWDT is automatically enabled
* on flashboot, and should be disabled by software when flashbooting completes.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_flashboot_en(rtc_cntl_dev_t *hw, bool enable)
{
hw->wdt_config0.flashboot_mod_en = (enable) ? 1 : 0;
}
/**
* @brief Enable/Disable the CPU0 to be reset on WDT_STAGE_ACTION_RESET_CPU
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable CPU0 to be reset, false to disable.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_procpu_reset_en(rtc_cntl_dev_t *hw, bool enable)
{
hw->wdt_config0.procpu_reset_en = (enable) ? 1 : 0;
}
/**
* @brief Enable/Disable the CPU1 to be reset on WDT_STAGE_ACTION_RESET_CPU
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable CPU1 to be reset, false to disable.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_appcpu_reset_en(rtc_cntl_dev_t *hw, bool enable)
{
hw->wdt_config0.appcpu_reset_en = (enable) ? 1 : 0;
}
/**
* @brief Enable/Disable the RWDT pause during sleep functionality
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable, false to disable.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_pause_in_sleep_en(rtc_cntl_dev_t *hw, bool enable)
{
hw->wdt_config0.pause_in_slp = (enable) ? 1 : 0;
}
/**
* @brief Enable/Disable chip reset on RWDT timeout.
*
* A chip reset also resets the analog portion of the chip. It will appear as a
* POWERON reset rather than an RTC reset.
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable, false to disable.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_chip_reset_en(rtc_cntl_dev_t *hw, bool enable)
{
hw->wdt_config0.chip_reset_en = (enable) ? 1 : 0;
}
/**
* @brief Set width of chip reset signal
*
* @param hw Start address of the peripheral registers.
* @param width Width of chip reset signal in terms of number of RTC_SLOW_CLK cycles
*/
FORCE_INLINE_ATTR void rwdt_ll_set_chip_reset_width(rtc_cntl_dev_t *hw, uint32_t width)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->wdt_config0, chip_reset_width, width);
}
/**
* @brief Feed the RWDT
*
* Resets the current timer count and current stage.
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void rwdt_ll_feed(rtc_cntl_dev_t *hw)
{
hw->wdt_feed.feed = 1;
}
/**
* @brief Enable write protection of the RWDT registers
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void rwdt_ll_write_protect_enable(rtc_cntl_dev_t *hw)
{
hw->wdt_wprotect = 0;
}
/**
* @brief Disable write protection of the RWDT registers
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void rwdt_ll_write_protect_disable(rtc_cntl_dev_t *hw)
{
hw->wdt_wprotect = RTC_CNTL_WDT_WKEY_VALUE;
}
/**
* @brief Enable the RWDT interrupt.
*
* @param hw Start address of the peripheral registers.
* @param enable True to enable RWDT interrupt, false to disable.
*/
FORCE_INLINE_ATTR void rwdt_ll_set_intr_enable(rtc_cntl_dev_t *hw, bool enable)
{
hw->int_ena.rtc_wdt = (enable) ? 1 : 0;
}
/**
* @brief Check if the RWDT interrupt has been triggered
*
* @param hw Start address of the peripheral registers.
* @return True if the RWDT interrupt was triggered
*/
FORCE_INLINE_ATTR bool rwdt_ll_check_intr_status(rtc_cntl_dev_t *hw)
{
return (hw->int_st.rtc_wdt) ? true : false;
}
/**
* @brief Clear the RWDT interrupt status.
*
* @param hw Start address of the peripheral registers.
*/
FORCE_INLINE_ATTR void rwdt_ll_clear_intr_status(rtc_cntl_dev_t *hw)
{
hw->int_clr.rtc_wdt = 1;
}
#ifdef __cplusplus
}
#endif

63
components/hal/esp32h4/include/hal/sar_ctrl_ll.h
View File

@ -1,63 +0,0 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* SAR related peripherals are interdependent.
* Related peripherals are:
* - ADC
* - PWDET
* - Temp Sensor
*
* All of above peripherals require SAR to work correctly.
* As SAR has some registers that will influence above mentioned peripherals.
* This file gives an abstraction for such registers
*/
#pragma once
#include <stdlib.h>
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define PWDET_CONF_REG 0x600A8010
#define PWDET_SAR_POWER_FORCE BIT(24)
#define PWDET_SAR_POWER_CNTL BIT(23)
typedef enum {
SAR_CTRL_LL_POWER_FSM, //SAR power controlled by FSM
SAR_CTRL_LL_POWER_ON, //SAR power on
SAR_CTRL_LL_POWER_OFF, //SAR power off
} sar_ctrl_ll_power_t;
/*---------------------------------------------------------------
SAR power control
---------------------------------------------------------------*/
/**
* @brief Set SAR power mode when controlled by PWDET
*
* @param[in] mode See `sar_ctrl_ll_power_t`
*/
static inline void sar_ctrl_ll_set_power_mode_from_pwdet(sar_ctrl_ll_power_t mode)
{
if (mode == SAR_CTRL_LL_POWER_FSM) {
REG_CLR_BIT(PWDET_CONF_REG, PWDET_SAR_POWER_FORCE);
} else if (mode == SAR_CTRL_LL_POWER_ON) {
REG_SET_BIT(PWDET_CONF_REG, PWDET_SAR_POWER_FORCE);
REG_SET_BIT(PWDET_CONF_REG, PWDET_SAR_POWER_CNTL);
} else if (mode == SAR_CTRL_LL_POWER_OFF) {
REG_SET_BIT(PWDET_CONF_REG, PWDET_SAR_POWER_FORCE);
REG_CLR_BIT(PWDET_CONF_REG, PWDET_SAR_POWER_CNTL);
}
}
#ifdef __cplusplus
}
#endif

58
components/hal/esp32h4/include/hal/sdm_ll.h
View File

@ -1,58 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "hal/misc.h"
#include "hal/assert.h"
#include "soc/gpio_sd_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Set Sigma-delta enable
*
* @param hw Peripheral SIGMADELTA hardware instance address.
* @param en Sigma-delta enable value
*/
static inline void sdm_ll_enable_clock(gpio_sd_dev_t *hw, bool en)
{
hw->misc.function_clk_en = en;
}
/**
* @brief Set Sigma-delta channel duty.
*
* @param hw Peripheral SIGMADELTA hardware instance address.
* @param channel Sigma-delta channel number
* @param density Sigma-delta quantized density of one channel, the value ranges from -128 to 127, recommended range is -90 ~ 90.
* The waveform is more like a random one in this range.
*/
__attribute__((always_inline))
static inline void sdm_ll_set_pulse_density(gpio_sd_dev_t *hw, int channel, int8_t density)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->channel[channel], duty, (uint32_t)density);
}
/**
* @brief Set Sigma-delta channel's clock pre-scale value.
*
* @param hw Peripheral SIGMADELTA hardware instance address.
* @param channel Sigma-delta channel number
* @param prescale The divider of source clock, ranges from 1 to 256
*/
static inline void sdm_ll_set_prescale(gpio_sd_dev_t *hw, int channel, uint32_t prescale)
{
HAL_ASSERT(prescale && prescale <= 256);
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->channel[channel], prescale, prescale - 1);
}
#ifdef __cplusplus
}
#endif

149
components/hal/esp32h4/include/hal/sha_ll.h
View File

@ -1,149 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "soc/hwcrypto_reg.h"
#include "hal/sha_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Start a new SHA block conversions (no initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_start_block(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_START_REG, 1);
}
/**
* @brief Continue a SHA block conversion (initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_continue_block(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_CONTINUE_REG, 1);
}
/**
* @brief Start a new SHA message conversion using DMA (no initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_start_dma(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_DMA_START_REG, 1);
}
/**
* @brief Continue a SHA message conversion using DMA (initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_continue_dma(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_DMA_CONTINUE_REG, 1);
}
/**
* @brief Load the current hash digest to digest register
*
* @note Happens automatically on ESP32S3
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_load(esp_sha_type sha_type)
{
}
/**
* @brief Sets the number of message blocks to be hashed
*
* @note DMA operation only
*
* @param num_blocks Number of message blocks to process
*/
static inline void sha_ll_set_block_num(size_t num_blocks)
{
REG_WRITE(SHA_BLOCK_NUM_REG, num_blocks);
}
/**
* @brief Checks if the SHA engine is currently busy hashing a block
*
* @return true SHA engine busy
* @return false SHA engine idle
*/
static inline bool sha_ll_busy(void)
{
return REG_READ(SHA_BUSY_REG);
}
/**
* @brief Write a text (message) block to the SHA engine
*
* @param input_text Input buffer to be written to the SHA engine
* @param block_word_len Number of words in block
*/
static inline void sha_ll_fill_text_block(const void *input_text, size_t block_word_len)
{
uint32_t *data_words = (uint32_t *)input_text;
uint32_t *reg_addr_buf = (uint32_t *)(SHA_TEXT_BASE);
for (int i = 0; i < block_word_len; i++) {
REG_WRITE(&reg_addr_buf[i], data_words[i]);
}
}
/**
* @brief Read the message digest from the SHA engine
*
* @param sha_type The SHA algorithm type
* @param digest_state Buffer that message digest will be written to
* @param digest_word_len Length of the message digest
*/
static inline void sha_ll_read_digest(esp_sha_type sha_type, void *digest_state, size_t digest_word_len)
{
uint32_t *digest_state_words = (uint32_t *)digest_state;
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < digest_word_len; i++) {
digest_state_words[i] = REG_READ(SHA_H_BASE + (i * REG_WIDTH));
}
}
/**
* @brief Write the message digest to the SHA engine
*
* @param sha_type The SHA algorithm type
* @param digest_state Message digest to be written to SHA engine
* @param digest_word_len Length of the message digest
*/
static inline void sha_ll_write_digest(esp_sha_type sha_type, void *digest_state, size_t digest_word_len)
{
uint32_t *digest_state_words = (uint32_t *)digest_state;
uint32_t *reg_addr_buf = (uint32_t *)(SHA_H_BASE);
for (int i = 0; i < digest_word_len; i++) {
REG_WRITE(&reg_addr_buf[i], digest_state_words[i]);
}
}
#ifdef __cplusplus
}
#endif

149
components/hal/esp32h4/include/hal/spi_flash_encrypted_ll.h
View File

@ -1,149 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The ll is not public api, don't use in application code.
* See readme.md in hal/include/hal/readme.md
******************************************************************************/
// The Lowlevel layer for SPI Flash Encryption.
#include "hal/assert.h"
#include "soc/system_reg.h"
#include "soc/hwcrypto_reg.h"
#include "soc/soc.h"
#include "string.h"
#include <stdbool.h>
#ifdef __cplusplus
extern "C" {
#endif
/// Choose type of chip you want to encrypt manully
typedef enum
{
FLASH_ENCRYPTION_MANU = 0, ///!< Manually encrypt the flash chip.
PSRAM_ENCRYPTION_MANU = 1 ///!< Manually encrypt the psram chip.
} flash_encrypt_ll_type_t;
/**
* Enable the flash encryption function under spi boot mode and download boot mode.
*/
static inline void spi_flash_encrypt_ll_enable(void)
{
REG_SET_BIT(SYSTEM_EXTERNAL_DEVICE_ENCRYPT_DECRYPT_CONTROL_REG,
SYSTEM_ENABLE_DOWNLOAD_MANUAL_ENCRYPT |
SYSTEM_ENABLE_SPI_MANUAL_ENCRYPT);
}
/*
* Disable the flash encryption mode.
*/
static inline void spi_flash_encrypt_ll_disable(void)
{
REG_CLR_BIT(SYSTEM_EXTERNAL_DEVICE_ENCRYPT_DECRYPT_CONTROL_REG,
SYSTEM_ENABLE_SPI_MANUAL_ENCRYPT);
}
/**
* Choose type of chip you want to encrypt manully
*
* @param type The type of chip to be encrypted
*
* @note The hardware currently support flash encryption.
*/
static inline void spi_flash_encrypt_ll_type(flash_encrypt_ll_type_t type)
{
// Our hardware only support flash encryption
HAL_ASSERT(type == FLASH_ENCRYPTION_MANU);
REG_WRITE(AES_XTS_DESTINATION_REG, type);
}
/**
* Configure the data size of a single encryption.
*
* @param block_size Size of the desired block.
*/
static inline void spi_flash_encrypt_ll_buffer_length(uint32_t size)
{
// Desired block should not be larger than the block size.
REG_WRITE(AES_XTS_SIZE_REG, size >> 5);
}
/**
* Save 32-bit piece of plaintext.
*
* @param address the address of written flash partition.
* @param buffer Buffer to store the input data.
* @param size Buffer size.
*
*/
static inline void spi_flash_encrypt_ll_plaintext_save(uint32_t address, const uint32_t* buffer, uint32_t size)
{
uint32_t plaintext_offs = (address % 64);
memcpy((void *)(AES_XTS_PLAIN_BASE + plaintext_offs), buffer, size);
}
/**
* Copy the flash address to XTS_AES physical address
*
* @param flash_addr flash address to write.
*/
static inline void spi_flash_encrypt_ll_address_save(uint32_t flash_addr)
{
REG_WRITE(AES_XTS_PHYSICAL_ADDR_REG, flash_addr);
}
/**
* Start flash encryption
*/
static inline void spi_flash_encrypt_ll_calculate_start(void)
{
REG_WRITE(AES_XTS_TRIGGER_REG, 1);
}
/**
* Wait for flash encryption termination
*/
static inline void spi_flash_encrypt_ll_calculate_wait_idle(void)
{
while(REG_READ(AES_XTS_STATE_REG) == 0x1) {
}
}
/**
* Finish the flash encryption and make encrypted result accessible to SPI.
*/
static inline void spi_flash_encrypt_ll_done(void)
{
REG_WRITE(AES_XTS_RELEASE_REG, 1);
while(REG_READ(AES_XTS_STATE_REG) != 0x3) {
}
}
/**
* Set to destroy encrypted result
*/
static inline void spi_flash_encrypt_ll_destroy(void)
{
REG_WRITE(AES_XTS_DESTROY_REG, 1);
}
/**
* Check if is qualified to encrypt the buffer
*
* @param address the address of written flash partition.
* @param length Buffer size.
*/
static inline bool spi_flash_encrypt_ll_check(uint32_t address, uint32_t length)
{
return ((address % length) == 0) ? true : false;
}
#ifdef __cplusplus
}
#endif

99
components/hal/esp32h4/include/hal/spi_flash_ll.h
View File

@ -1,99 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The ll is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The Lowlevel layer for SPI Flash
#pragma once
#include "gpspi_flash_ll.h"
#include "spimem_flash_ll.h"
#ifdef __cplusplus
extern "C" {
#endif
#define spi_flash_ll_calculate_clock_reg(host_id, clock_div) (((host_id)<=SPI1_HOST) ? spimem_flash_ll_calculate_clock_reg(clock_div) \
: gpspi_flash_ll_calculate_clock_reg(clock_div))
#define spi_flash_ll_get_source_clock_freq_mhz(host_id) (((host_id)<=SPI1_HOST) ? spimem_flash_ll_get_source_freq_mhz() : GPSPI_FLASH_LL_PERIPHERAL_FREQUENCY_MHZ)
#define spi_flash_ll_get_hw(host_id) (((host_id)<=SPI1_HOST ? (spi_dev_t*) spimem_flash_ll_get_hw(host_id) \
: gpspi_flash_ll_get_hw(host_id)))
#define spi_flash_ll_hw_get_id(dev) ({int dev_id = spimem_flash_ll_hw_get_id(dev); \
if (dev_id < 0) {\
dev_id = gpspi_flash_ll_hw_get_id(dev);\
}\
dev_id; \
})
typedef union {
gpspi_flash_ll_clock_reg_t gpspi;
spimem_flash_ll_clock_reg_t spimem;
} spi_flash_ll_clock_reg_t;
#ifdef GPSPI_BUILD
#define spi_flash_ll_reset(dev) gpspi_flash_ll_reset((spi_dev_t*)dev)
#define spi_flash_ll_cmd_is_done(dev) gpspi_flash_ll_cmd_is_done((spi_dev_t*)dev)
#define spi_flash_ll_get_buffer_data(dev, buffer, read_len) gpspi_flash_ll_get_buffer_data((spi_dev_t*)dev, buffer, read_len)
#define spi_flash_ll_set_buffer_data(dev, buffer, len) gpspi_flash_ll_set_buffer_data((spi_dev_t*)dev, buffer, len)
#define spi_flash_ll_user_start(dev) gpspi_flash_ll_user_start((spi_dev_t*)dev)
#define spi_flash_ll_host_idle(dev) gpspi_flash_ll_host_idle((spi_dev_t*)dev)
#define spi_flash_ll_read_phase(dev) gpspi_flash_ll_read_phase((spi_dev_t*)dev)
#define spi_flash_ll_set_cs_pin(dev, pin) gpspi_flash_ll_set_cs_pin((spi_dev_t*)dev, pin)
#define spi_flash_ll_set_read_mode(dev, read_mode) gpspi_flash_ll_set_read_mode((spi_dev_t*)dev, read_mode)
#define spi_flash_ll_set_clock(dev, clk) gpspi_flash_ll_set_clock((spi_dev_t*)dev, (gpspi_flash_ll_clock_reg_t*)clk)
#define spi_flash_ll_set_miso_bitlen(dev, bitlen) gpspi_flash_ll_set_miso_bitlen((spi_dev_t*)dev, bitlen)
#define spi_flash_ll_set_mosi_bitlen(dev, bitlen) gpspi_flash_ll_set_mosi_bitlen((spi_dev_t*)dev, bitlen)
#define spi_flash_ll_set_command(dev, cmd, bitlen) gpspi_flash_ll_set_command((spi_dev_t*)dev, cmd, bitlen)
#define spi_flash_ll_set_addr_bitlen(dev, bitlen) gpspi_flash_ll_set_addr_bitlen((spi_dev_t*)dev, bitlen)
#define spi_flash_ll_get_addr_bitlen(dev) gpspi_flash_ll_get_addr_bitlen((spi_dev_t*)dev)
#define spi_flash_ll_set_address(dev, addr) gpspi_flash_ll_set_address((spi_dev_t*)dev, addr)
#define spi_flash_ll_set_usr_address(dev, addr, bitlen) gpspi_flash_ll_set_usr_address((spi_dev_t*)dev, addr, bitlen)
#define spi_flash_ll_set_dummy(dev, dummy) gpspi_flash_ll_set_dummy((spi_dev_t*)dev, dummy)
#define spi_flash_ll_set_dummy_out(dev, en, lev) gpspi_flash_ll_set_dummy_out((spi_dev_t*)dev, en, lev)
#define spi_flash_ll_set_hold(dev, hold_n) gpspi_flash_ll_set_hold((spi_dev_t*)dev, hold_n)
#define spi_flash_ll_set_cs_setup(dev, cs_setup_time) gpspi_flash_ll_set_cs_setup((spi_dev_t*)dev, cs_setup_time)
#else
#define spi_flash_ll_reset(dev) spimem_flash_ll_reset((spi_mem_dev_t*)dev)
#define spi_flash_ll_cmd_is_done(dev) spimem_flash_ll_cmd_is_done((spi_mem_dev_t*)dev)
#define spi_flash_ll_erase_chip(dev) spimem_flash_ll_erase_chip((spi_mem_dev_t*)dev)
#define spi_flash_ll_erase_sector(dev) spimem_flash_ll_erase_sector((spi_mem_dev_t*)dev)
#define spi_flash_ll_erase_block(dev) spimem_flash_ll_erase_block((spi_mem_dev_t*)dev)
#define spi_flash_ll_set_write_protect(dev, wp) spimem_flash_ll_set_write_protect((spi_mem_dev_t*)dev, wp)
#define spi_flash_ll_get_buffer_data(dev, buffer, read_len) spimem_flash_ll_get_buffer_data((spi_mem_dev_t*)dev, buffer, read_len)
#define spi_flash_ll_set_buffer_data(dev, buffer, len) spimem_flash_ll_set_buffer_data((spi_mem_dev_t*)dev, buffer, len)
#define spi_flash_ll_program_page(dev, buffer, len) spimem_flash_ll_program_page((spi_mem_dev_t*)dev, buffer, len)
#define spi_flash_ll_user_start(dev) spimem_flash_ll_user_start((spi_mem_dev_t*)dev)
#define spi_flash_ll_host_idle(dev) spimem_flash_ll_host_idle((spi_mem_dev_t*)dev)
#define spi_flash_ll_read_phase(dev) spimem_flash_ll_read_phase((spi_mem_dev_t*)dev)
#define spi_flash_ll_set_cs_pin(dev, pin) spimem_flash_ll_set_cs_pin((spi_mem_dev_t*)dev, pin)
#define spi_flash_ll_set_read_mode(dev, read_mode) spimem_flash_ll_set_read_mode((spi_mem_dev_t*)dev, read_mode)
#define spi_flash_ll_set_clock(dev, clk) spimem_flash_ll_set_clock((spi_mem_dev_t*)dev, (spimem_flash_ll_clock_reg_t*)clk)
#define spi_flash_ll_set_miso_bitlen(dev, bitlen) spimem_flash_ll_set_miso_bitlen((spi_mem_dev_t*)dev, bitlen)
#define spi_flash_ll_set_mosi_bitlen(dev, bitlen) spimem_flash_ll_set_mosi_bitlen((spi_mem_dev_t*)dev, bitlen)
#define spi_flash_ll_set_command(dev, cmd, bitlen) spimem_flash_ll_set_command((spi_mem_dev_t*)dev, cmd, bitlen)
#define spi_flash_ll_set_addr_bitlen(dev, bitlen) spimem_flash_ll_set_addr_bitlen((spi_mem_dev_t*)dev, bitlen)
#define spi_flash_ll_get_addr_bitlen(dev) spimem_flash_ll_get_addr_bitlen((spi_mem_dev_t*) dev)
#define spi_flash_ll_set_address(dev, addr) spimem_flash_ll_set_address((spi_mem_dev_t*)dev, addr)
#define spi_flash_ll_set_usr_address(dev, addr, bitlen) spimem_flash_ll_set_usr_address((spi_mem_dev_t*)dev, addr, bitlen)
#define spi_flash_ll_set_dummy(dev, dummy) spimem_flash_ll_set_dummy((spi_mem_dev_t*)dev, dummy)
#define spi_flash_ll_set_dummy_out(dev, en, lev) spimem_flash_ll_set_dummy_out((spi_mem_dev_t*)dev, en, lev)
#define spi_flash_ll_set_hold(dev, hold_n) spimem_flash_ll_set_hold((spi_mem_dev_t*)dev, hold_n)
#define spi_flash_ll_set_cs_setup(dev, cs_setup_time) spimem_flash_ll_set_cs_setup((spi_mem_dev_t*)dev, cs_setup_time)
#endif
#ifdef __cplusplus
}
#endif

1199
components/hal/esp32h4/include/hal/spi_ll.h
View File

File diff suppressed because it is too large Load Diff

588
components/hal/esp32h4/include/hal/spimem_flash_ll.h
View File

@ -1,588 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The ll is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The Lowlevel layer for SPI Flash
#pragma once
#include <stdlib.h>
#include <sys/param.h> // For MIN/MAX
#include <stdbool.h>
#include <string.h>
#include "soc/spi_periph.h"
#include "soc/spi_mem_struct.h"
#include "hal/assert.h"
#include "hal/spi_types.h"
#include "hal/spi_flash_types.h"
#ifdef __cplusplus
extern "C" {
#endif
#define spimem_flash_ll_get_hw(host_id) (((host_id)==SPI1_HOST ? &SPIMEM1 : NULL ))
#define spimem_flash_ll_hw_get_id(dev) ((dev) == (void*)&SPIMEM1? SPI1_HOST: -1)
typedef typeof(SPIMEM1.clock.val) spimem_flash_ll_clock_reg_t;
/*------------------------------------------------------------------------------
* Control
*----------------------------------------------------------------------------*/
/**
* Reset peripheral registers before configuration and starting control
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_reset(spi_mem_dev_t *dev)
{
dev->user.val = 0;
dev->ctrl.val = 0;
}
/**
* Check whether the previous operation is done.
*
* @param dev Beginning address of the peripheral registers.
*
* @return true if last command is done, otherwise false.
*/
static inline bool spimem_flash_ll_cmd_is_done(const spi_mem_dev_t *dev)
{
return (dev->cmd.val == 0);
}
/**
* Erase the flash chip.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_erase_chip(spi_mem_dev_t *dev)
{
dev->cmd.flash_ce = 1;
}
/**
* Erase the sector, the address should be set by spimem_flash_ll_set_address.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_erase_sector(spi_mem_dev_t *dev)
{
dev->ctrl.val = 0;
dev->cmd.flash_se = 1;
}
/**
* Erase the block, the address should be set by spimem_flash_ll_set_address.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_erase_block(spi_mem_dev_t *dev)
{
dev->cmd.flash_be = 1;
}
/**
* Suspend erase/program operation.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_suspend(spi_mem_dev_t *dev)
{
dev->flash_sus_ctrl.flash_pes = 1;
}
/**
* Resume suspended erase/program operation.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_resume(spi_mem_dev_t *dev)
{
dev->flash_sus_ctrl.flash_per = 1;
}
/**
* Initialize auto suspend mode, and esp32h4 doesn't support disable auto-suspend.
*
* @param dev Beginning address of the peripheral registers.
* @param auto_sus Enable/disable Flash Auto-Suspend.
*/
static inline void spimem_flash_ll_auto_suspend_init(spi_mem_dev_t *dev, bool auto_sus)
{
dev->flash_sus_ctrl.flash_pes_en = auto_sus;
}
/**
* Initialize auto resume mode
*
* @param dev Beginning address of the peripheral registers.
* @param auto_res Enable/Disable Flash Auto-Resume.
*
*/
static inline void spimem_flash_ll_auto_resume_init(spi_mem_dev_t *dev, bool auto_res)
{
dev->flash_sus_ctrl.pes_per_en = auto_res;
}
/**
* Setup the flash suspend command, may vary from chips to chips.
*
* @param dev Beginning address of the peripheral registers.
* @param sus_cmd Flash suspend command.
*
*/
static inline void spimem_flash_ll_suspend_cmd_setup(spi_mem_dev_t *dev, uint32_t sus_cmd)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->flash_sus_cmd, flash_pes_command, sus_cmd);
}
/**
* Setup the flash resume command, may vary from chips to chips.
*
* @param dev Beginning address of the peripheral registers.
* @param res_cmd Flash resume command.
*
*/
static inline void spimem_flash_ll_resume_cmd_setup(spi_mem_dev_t *dev, uint32_t res_cmd)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->flash_sus_cmd, flash_per_command, res_cmd);
}
/**
* Setup the flash read suspend status command, may vary from chips to chips.
*
* @param dev Beginning address of the peripheral registers.
* @param pesr_cmd Flash read suspend status command.
*
*/
static inline void spimem_flash_ll_rd_sus_cmd_setup(spi_mem_dev_t *dev, uint32_t pesr_cmd)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->flash_sus_cmd, wait_pesr_command, pesr_cmd);
}
/**
* Setup to check SUS/SUS1/SUS2 to ensure the suspend status of flashs.
*
* @param dev Beginning address of the peripheral registers.
* @param sus_check_sus_en 1: enable, 0: disable.
*
*/
static inline void spimem_flash_ll_sus_check_sus_setup(spi_mem_dev_t *dev, bool sus_check_sus_en)
{
dev->flash_sus_ctrl.sus_timeout_cnt = 5;
dev->flash_sus_ctrl.pes_end_en = sus_check_sus_en;
}
/**
* Setup to check SUS/SUS1/SUS2 to ensure the resume status of flashs.
*
* @param dev Beginning address of the peripheral registers.
* @param sus_check_sus_en 1: enable, 0: disable.
*
*/
static inline void spimem_flash_ll_res_check_sus_setup(spi_mem_dev_t *dev, bool res_check_sus_en)
{
dev->flash_sus_ctrl.sus_timeout_cnt = 5;
dev->flash_sus_ctrl.per_end_en = res_check_sus_en;
}
/**
* Set 8 bit command to read suspend status
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_set_read_sus_status(spi_mem_dev_t *dev, uint32_t sus_conf)
{
dev->flash_sus_ctrl.frd_sus_2b = 0;
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->flash_sus_ctrl, pesr_end_msk, sus_conf);
}
/**
* Initialize auto wait idle mode
*
* @param dev Beginning address of the peripheral registers.
* @param auto_waiti Enable/disable auto wait-idle function
*/
static inline void spimem_flash_ll_auto_wait_idle_init(spi_mem_dev_t *dev, bool auto_waiti)
{
HAL_FORCE_MODIFY_U32_REG_FIELD(dev->flash_waiti_ctrl, waiti_cmd, 0x05);
dev->flash_sus_ctrl.flash_per_wait_en = auto_waiti;
dev->flash_sus_ctrl.flash_pes_wait_en = auto_waiti;
}
/**
* Return the suspend status of erase or program operations.
*
* @param dev Beginning address of the peripheral registers.
*
* @return true if suspended, otherwise false.
*/
static inline bool spimem_flash_ll_sus_status(spi_mem_dev_t *dev)
{
return dev->sus_status.flash_sus;
}
/**
* Enable/disable write protection for the flash chip.
*
* @param dev Beginning address of the peripheral registers.
* @param wp true to enable the protection, false to disable (write enable).
*/
static inline void spimem_flash_ll_set_write_protect(spi_mem_dev_t *dev, bool wp)
{
if (wp) {
dev->cmd.flash_wrdi = 1;
} else {
dev->cmd.flash_wren = 1;
}
}
/**
* Get the read data from the buffer after ``spimem_flash_ll_read`` is done.
*
* @param dev Beginning address of the peripheral registers.
* @param buffer Buffer to hold the output data
* @param read_len Length to get out of the buffer
*/
static inline void spimem_flash_ll_get_buffer_data(spi_mem_dev_t *dev, void *buffer, uint32_t read_len)
{
if (((intptr_t)buffer % 4 == 0) && (read_len % 4 == 0)) {
// If everything is word-aligned, do a faster memcpy
memcpy(buffer, (void *)dev->data_buf, read_len);
} else {
// Otherwise, slow(er) path copies word by word
int copy_len = read_len;
for (int i = 0; i < (read_len + 3) / 4; i++) {
int word_len = MIN(sizeof(uint32_t), copy_len);
uint32_t word = dev->data_buf[i];
memcpy(buffer, &word, word_len);
buffer = (void *)((intptr_t)buffer + word_len);
copy_len -= word_len;
}
}
}
/**
* Set the data to be written in the data buffer.
*
* @param dev Beginning address of the peripheral registers.
* @param buffer Buffer holding the data
* @param length Length of data in bytes.
*/
static inline void spimem_flash_ll_set_buffer_data(spi_mem_dev_t *dev, const void *buffer, uint32_t length)
{
// Load data registers, word at a time
int num_words = (length + 3) / 4;
for (int i = 0; i < num_words; i++) {
uint32_t word = 0;
uint32_t word_len = MIN(length, sizeof(word));
memcpy(&word, buffer, word_len);
dev->data_buf[i] = word;
length -= word_len;
buffer = (void *)((intptr_t)buffer + word_len);
}
}
/**
* Program a page of the flash chip. Call ``spimem_flash_ll_set_address`` before
* this to set the address to program.
*
* @param dev Beginning address of the peripheral registers.
* @param buffer Buffer holding the data to program
* @param length Length to program.
*/
static inline void spimem_flash_ll_program_page(spi_mem_dev_t *dev, const void *buffer, uint32_t length)
{
dev->user.usr_dummy = 0;
spimem_flash_ll_set_buffer_data(dev, buffer, length);
dev->cmd.flash_pp = 1;
}
/**
* Trigger a user defined transaction. All phases, including command, address, dummy, and the data phases,
* should be configured before this is called.
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_user_start(spi_mem_dev_t *dev)
{
dev->cmd.usr = 1;
}
/**
* Check whether the host is idle to perform new commands.
*
* @param dev Beginning address of the peripheral registers.
*
* @return true if the host is idle, otherwise false
*/
static inline bool spimem_flash_ll_host_idle(const spi_mem_dev_t *dev)
{
return dev->fsm.spi0_mst_st == 0;
}
/**
* Set phases for user-defined transaction to read
*
* @param dev Beginning address of the peripheral registers.
*/
static inline void spimem_flash_ll_read_phase(spi_mem_dev_t *dev)
{
typeof (dev->user) user = {
.usr_command = 1,
.usr_mosi = 0,
.usr_miso = 1,
.usr_addr = 1,
};
dev->user = user;
}
/*------------------------------------------------------------------------------
* Configs
*----------------------------------------------------------------------------*/
/**
* Select which pin to use for the flash
*
* @param dev Beginning address of the peripheral registers.
* @param pin Pin ID to use, 0-2. Set to other values to disable all the CS pins.
*/
static inline void spimem_flash_ll_set_cs_pin(spi_mem_dev_t *dev, int pin)
{
dev->misc.cs0_dis = (pin == 0) ? 0 : 1;
dev->misc.cs1_dis = (pin == 1) ? 0 : 1;
}
/**
* Set the read io mode.
*
* @param dev Beginning address of the peripheral registers.
* @param read_mode I/O mode to use in the following transactions.
*/
static inline void spimem_flash_ll_set_read_mode(spi_mem_dev_t *dev, esp_flash_io_mode_t read_mode)
{
typeof (dev->ctrl) ctrl = dev->ctrl;
ctrl.val &= ~(SPI_MEM_FREAD_QIO_M | SPI_MEM_FREAD_QUAD_M | SPI_MEM_FREAD_DIO_M | SPI_MEM_FREAD_DUAL_M);
ctrl.val |= SPI_MEM_FASTRD_MODE_M;
switch (read_mode) {
case SPI_FLASH_FASTRD:
//the default option
break;
case SPI_FLASH_QIO:
ctrl.fread_qio = 1;
break;
case SPI_FLASH_QOUT:
ctrl.fread_quad = 1;
break;
case SPI_FLASH_DIO:
ctrl.fread_dio = 1;
break;
case SPI_FLASH_DOUT:
ctrl.fread_dual = 1;
break;
case SPI_FLASH_SLOWRD:
ctrl.fastrd_mode = 0;
break;
default:
abort();
}
dev->ctrl = ctrl;
}
/**
* Set clock frequency to work at.
*
* @param dev Beginning address of the peripheral registers.
* @param clock_val pointer to the clock value to set
*/
static inline void spimem_flash_ll_set_clock(spi_mem_dev_t *dev, spimem_flash_ll_clock_reg_t *clock_val)
{
dev->clock.val = *clock_val;
}
/**
* Set the input length, in bits.
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of input, in bits.
*/
static inline void spimem_flash_ll_set_miso_bitlen(spi_mem_dev_t *dev, uint32_t bitlen)
{
dev->user.usr_miso = bitlen > 0;
dev->miso_dlen.usr_miso_bit_len = bitlen ? (bitlen - 1) : 0;
}
/**
* Set the output length, in bits (not including command, address and dummy
* phases)
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of output, in bits.
*/
static inline void spimem_flash_ll_set_mosi_bitlen(spi_mem_dev_t *dev, uint32_t bitlen)
{
dev->user.usr_mosi = bitlen > 0;
dev->mosi_dlen.usr_mosi_bit_len = bitlen ? (bitlen - 1) : 0;
}
/**
* Set the command.
*
* @param dev Beginning address of the peripheral registers.
* @param command Command to send
* @param bitlen Length of the command
*/
static inline void spimem_flash_ll_set_command(spi_mem_dev_t *dev, uint32_t command, uint32_t bitlen)
{
dev->user.usr_command = 1;
typeof(dev->user2) user2 = {
.usr_command_value = command,
.usr_command_bitlen = (bitlen - 1),
};
dev->user2 = user2;
}
/**
* Get the address length that is set in register, in bits.
*
* @param dev Beginning address of the peripheral registers.
*
*/
static inline int spimem_flash_ll_get_addr_bitlen(spi_mem_dev_t *dev)
{
return dev->user.usr_addr ? dev->user1.usr_addr_bitlen + 1 : 0;
}
/**
* Set the address length to send, in bits. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param bitlen Length of the address, in bits
*/
static inline void spimem_flash_ll_set_addr_bitlen(spi_mem_dev_t *dev, uint32_t bitlen)
{
dev->user1.usr_addr_bitlen = (bitlen - 1);
dev->user.usr_addr = bitlen ? 1 : 0;
}
/**
* Set the address to send. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param addr Address to send
*/
static inline void spimem_flash_ll_set_address(spi_mem_dev_t *dev, uint32_t addr)
{
dev->addr = addr;
}
/**
* Set the address to send in user mode. Should be called before commands that requires the address e.g. erase sector, read, write...
*
* @param dev Beginning address of the peripheral registers.
* @param addr Address to send
*/
static inline void spimem_flash_ll_set_usr_address(spi_mem_dev_t *dev, uint32_t addr, uint32_t bitlen)
{
(void)bitlen;
spimem_flash_ll_set_address(dev, addr);
}
/**
* Set the length of dummy cycles.
*
* @param dev Beginning address of the peripheral registers.
* @param dummy_n Cycles of dummy phases
*/
static inline void spimem_flash_ll_set_dummy(spi_mem_dev_t *dev, uint32_t dummy_n)
{
dev->user.usr_dummy = dummy_n ? 1 : 0;
dev->user1.usr_dummy_cyclelen = dummy_n - 1;
}
/**
* Set D/Q output level during dummy phase
*
* @param dev Beginning address of the peripheral registers.
* @param out_en whether to enable IO output for dummy phase
* @param out_level dummy output level
*/
static inline void spimem_flash_ll_set_dummy_out(spi_mem_dev_t *dev, uint32_t out_en, uint32_t out_lev)
{
dev->ctrl.fdummy_out = out_en;
dev->ctrl.q_pol = out_lev;
dev->ctrl.d_pol = out_lev;
}
/**
* Set CS hold time.
*
* @param dev Beginning address of the peripheral registers.
* @param hold_n CS hold time config used by the host.
*/
static inline void spimem_flash_ll_set_hold(spi_mem_dev_t *dev, uint32_t hold_n)
{
dev->ctrl2.cs_hold_time = hold_n - 1;
dev->user.cs_hold = (hold_n > 0? 1: 0);
}
static inline void spimem_flash_ll_set_cs_setup(spi_mem_dev_t *dev, uint32_t cs_setup_time)
{
dev->user.cs_setup = (cs_setup_time > 0 ? 1 : 0);
dev->ctrl2.cs_setup_time = cs_setup_time - 1;
}
/**
* Get the spi flash source clock frequency. Used for calculating
* the divider parameters.
*
* @param None
*
* @return the frequency of spi flash clock source.(MHz)
*/
static inline uint8_t spimem_flash_ll_get_source_freq_mhz(void)
{
// TODO: Default is PLL480M, this is hard-coded.
// In the future, we can get the CPU clock source by calling interface.
uint8_t clock_val = 0;
switch (SPIMEM0.core_clk_sel.spi01_clk_sel) {
case 0:
clock_val = 48;
break;
default:
abort();
}
return clock_val;
}
/**
* Calculate spi_flash clock frequency division parameters for register.
*
* @param clkdiv frequency division factor
*
* @return Register setting for the given clock division factor.
*/
static inline uint32_t spimem_flash_ll_calculate_clock_reg(uint8_t clkdiv)
{
uint32_t div_parameter;
// See comments of `clock` in `spi_mem_struct.h`
if (clkdiv == 1) {
div_parameter = (1 << 31);
} else {
div_parameter = ((clkdiv - 1) | (((clkdiv - 1) / 2 & 0xff) << 8 ) | (((clkdiv - 1) & 0xff) << 16));
}
return div_parameter;
}
#ifdef __cplusplus
}
#endif

165
components/hal/esp32h4/include/hal/systimer_ll.h
View File

@ -1,165 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "soc/systimer_struct.h"
#include "soc/clk_tree_defs.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
// All these functions get invoked either from ISR or HAL that linked to IRAM.
// Always inline these functions even no gcc optimization is applied.
/******************* Clock *************************/
__attribute__((always_inline)) static inline void systimer_ll_enable_clock(systimer_dev_t *dev, bool en)
{
dev->conf.clk_en = en;
}
static inline void systimer_ll_set_clock_source(soc_periph_systimer_clk_src_t clk_src)
{
(void)clk_src;
}
static inline soc_periph_systimer_clk_src_t systimer_ll_get_clock_source(void)
{
return SYSTIMER_CLK_SRC_XTAL;
}
/******************* Counter *************************/
__attribute__((always_inline)) static inline void systimer_ll_enable_counter(systimer_dev_t *dev, uint32_t counter_id, bool en)
{
if (en) {
dev->conf.val |= 1 << (30 - counter_id);
} else {
dev->conf.val &= ~(1 << (30 - counter_id));
}
}
__attribute__((always_inline)) static inline void systimer_ll_counter_can_stall_by_cpu(systimer_dev_t *dev, uint32_t counter_id, uint32_t cpu_id, bool can)
{
if (can) {
dev->conf.val |= 1 << ((28 - counter_id * 2) - cpu_id);
} else {
dev->conf.val &= ~(1 << ((28 - counter_id * 2) - cpu_id));
}
}
__attribute__((always_inline)) static inline void systimer_ll_counter_snapshot(systimer_dev_t *dev, uint32_t counter_id)
{
dev->unit_op[counter_id].timer_unit_update = 1;
}
__attribute__((always_inline)) static inline bool systimer_ll_is_counter_value_valid(systimer_dev_t *dev, uint32_t counter_id)
{
return dev->unit_op[counter_id].timer_unit_value_valid;
}
__attribute__((always_inline)) static inline void systimer_ll_set_counter_value(systimer_dev_t *dev, uint32_t counter_id, uint64_t value)
{
dev->unit_load_val[counter_id].hi.timer_unit_load_hi = value >> 32;
dev->unit_load_val[counter_id].lo.timer_unit_load_lo = value & 0xFFFFFFFF;
}
__attribute__((always_inline)) static inline uint32_t systimer_ll_get_counter_value_low(systimer_dev_t *dev, uint32_t counter_id)
{
return dev->unit_val[counter_id].lo.timer_unit_value_lo;
}
__attribute__((always_inline)) static inline uint32_t systimer_ll_get_counter_value_high(systimer_dev_t *dev, uint32_t counter_id)
{
return dev->unit_val[counter_id].hi.timer_unit_value_hi;
}
__attribute__((always_inline)) static inline void systimer_ll_apply_counter_value(systimer_dev_t *dev, uint32_t counter_id)
{
dev->unit_load[counter_id].val = 0x01;
}
/******************* Alarm *************************/
__attribute__((always_inline)) static inline void systimer_ll_set_alarm_target(systimer_dev_t *dev, uint32_t alarm_id, uint64_t value)
{
dev->target_val[alarm_id].hi.timer_target_hi = value >> 32;
dev->target_val[alarm_id].lo.timer_target_lo = value & 0xFFFFFFFF;
}
__attribute__((always_inline)) static inline uint64_t systimer_ll_get_alarm_target(systimer_dev_t *dev, uint32_t alarm_id)
{
return ((uint64_t)(dev->target_val[alarm_id].hi.timer_target_hi) << 32) | dev->target_val[alarm_id].lo.timer_target_lo;
}
__attribute__((always_inline)) static inline void systimer_ll_connect_alarm_counter(systimer_dev_t *dev, uint32_t alarm_id, uint32_t counter_id)
{
dev->target_conf[alarm_id].target_timer_unit_sel = counter_id;
}
__attribute__((always_inline)) static inline void systimer_ll_enable_alarm_oneshot(systimer_dev_t *dev, uint32_t alarm_id)
{
dev->target_conf[alarm_id].target_period_mode = 0;
}
__attribute__((always_inline)) static inline void systimer_ll_enable_alarm_period(systimer_dev_t *dev, uint32_t alarm_id)
{
dev->target_conf[alarm_id].target_period_mode = 1;
}
__attribute__((always_inline)) static inline void systimer_ll_set_alarm_period(systimer_dev_t *dev, uint32_t alarm_id, uint32_t period)
{
HAL_ASSERT(period < (1 << 26));
dev->target_conf[alarm_id].target_period = period;
}
__attribute__((always_inline)) static inline uint32_t systimer_ll_get_alarm_period(systimer_dev_t *dev, uint32_t alarm_id)
{
return dev->target_conf[alarm_id].target_period;
}
__attribute__((always_inline)) static inline void systimer_ll_apply_alarm_value(systimer_dev_t *dev, uint32_t alarm_id)
{
dev->comp_load[alarm_id].val = 0x01;
}
__attribute__((always_inline)) static inline void systimer_ll_enable_alarm(systimer_dev_t *dev, uint32_t alarm_id, bool en)
{
if (en) {
dev->conf.val |= 1 << (24 - alarm_id);
} else {
dev->conf.val &= ~(1 << (24 - alarm_id));
}
}
/******************* Interrupt *************************/
__attribute__((always_inline)) static inline void systimer_ll_enable_alarm_int(systimer_dev_t *dev, uint32_t alarm_id, bool en)
{
if (en) {
dev->int_ena.val |= 1 << alarm_id;
} else {
dev->int_ena.val &= ~(1 << alarm_id);
}
}
__attribute__((always_inline)) static inline bool systimer_ll_is_alarm_int_fired(systimer_dev_t *dev, uint32_t alarm_id)
{
return dev->int_st.val & (1 << alarm_id);
}
__attribute__((always_inline)) static inline void systimer_ll_clear_alarm_int(systimer_dev_t *dev, uint32_t alarm_id)
{
dev->int_clr.val |= 1 << alarm_id;
}
#ifdef __cplusplus
}
#endif

135
components/hal/esp32h4/include/hal/temperature_sensor_ll.h
View File

@ -1,135 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in component/hal/readme.md
******************************************************************************/
// The LL for temperature sensor
#pragma once
#include <stdbool.h>
#include <stdlib.h>
#include "hal/regi2c_ctrl.h"
#include "soc/regi2c_saradc.h"
#include "soc/apb_saradc_struct.h"
#include "soc/soc.h"
#include "soc/soc_caps.h"
#include "hal/temperature_sensor_types.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
#define TEMPERATURE_SENSOR_LL_ADC_FACTOR (0.4386)
#define TEMPERATURE_SENSOR_LL_DAC_FACTOR (27.88)
#define TEMPERATURE_SENSOR_LL_OFFSET_FACTOR (20.52)
/**
* @brief Enable the temperature sensor power.
*
* @param enable true: enable the power.
*/
static inline void temperature_sensor_ll_enable(bool enable)
{
APB_SARADC.apb_tsens_ctrl.tsens_pu = enable;
}
/**
* @brief Enable the clock
*/
static inline void temperature_sensor_ll_clk_enable(bool enable)
{
// No need to enable the temperature clock on esp32h4
}
/**
* @brief Select the clock source for temperature sensor. On ESP32-H4, temperature sensor
* can use XTAL or FOSC. To make it convenience, suggest using XTAL all the time.
*
* @param clk_src refer to ``temperature_sensor_clk_src_t``
*/
static inline void temperature_sensor_ll_clk_sel(temperature_sensor_clk_src_t clk_src)
{
uint8_t clk_sel = 0;
switch (clk_src) {
case TEMPERATURE_SENSOR_CLK_SRC_XTAL:
clk_sel = 1;
break;
case TEMPERATURE_SENSOR_CLK_SRC_RC_FAST:
clk_sel = 0;
break;
default:
HAL_ASSERT(false);
break;
}
APB_SARADC.apb_tsens_ctrl2.tsens_clk_sel = clk_sel;
}
/**
* @brief Set the hardware range, you can refer to the table ``temperature_sensor_attributes``
*
* @param tsens_dac ``reg_val`` in table ``temperature_sensor_attributes``
*/
static inline void temperature_sensor_ll_set_range(uint32_t range)
{
REGI2C_WRITE_MASK(I2C_SAR_ADC, I2C_SARADC_TSENS_DAC, range);
}
/**
* @brief Get the raw value of temperature sensor.
*
* @return uint32_t raw_value
*/
static inline uint32_t temperature_sensor_ll_get_raw_value(void)
{
return APB_SARADC.apb_tsens_ctrl.tsens_out;
}
/**
* @brief Get the offset value of temperature sensor.
*
* @note This function is only used in legacy driver
*
* @return uint32_t offset value
*/
static inline uint32_t temperature_sensor_ll_get_offset(void)
{
return REGI2C_READ_MASK(I2C_SAR_ADC, I2C_SARADC_TSENS_DAC);
}
/**
* @brief Get the clock division factor value.
*
* @note This function is only used in legacy driver
*
* @return uint32_t clock division factor
*/
static inline uint32_t temperature_sensor_ll_get_clk_div(void)
{
return APB_SARADC.apb_tsens_ctrl.tsens_clk_div;
}
/**
* @brief Set the clock division factor value, actually this has no impact on temperature sensor.
* Suggest just keep it as default value 6.
*
* @note This function is only used in legacy driver
*
* @param clk_div clock division factor, range from 1-10
*/
static inline void temperature_sensor_ll_set_clk_div(uint8_t clk_div)
{
APB_SARADC.apb_tsens_ctrl.tsens_clk_div = clk_div;
}
#ifdef __cplusplus
}
#endif

281
components/hal/esp32h4/include/hal/timer_ll.h
View File

@ -1,281 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// Note that most of the register operations in this layer are non-atomic operations.
#pragma once
#include <stdbool.h>
#include "hal/assert.h"
#include "hal/misc.h"
#include "hal/timer_types.h"
#include "soc/timer_group_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
// Get timer group register base address with giving group number
#define TIMER_LL_GET_HW(group_id) ((group_id == 0) ? (&TIMERG0) : (&TIMERG1))
#define TIMER_LL_EVENT_ALARM(timer_id) (1 << (timer_id))
/**
* @brief Set clock source for timer
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param clk_src Clock source
*/
static inline void timer_ll_set_clock_source(timg_dev_t *hw, uint32_t timer_num, gptimer_clock_source_t clk_src)
{
switch (clk_src) {
case GPTIMER_CLK_SRC_AHB:
hw->hw_timer[timer_num].config.tx_use_xtal = 0;
break;
case GPTIMER_CLK_SRC_XTAL:
hw->hw_timer[timer_num].config.tx_use_xtal = 1;
break;
default:
HAL_ASSERT(false && "unsupported clock source");
break;
}
}
/**
* @brief Enable Timer Group (GPTimer) module clock
*
* @param hw Timer Group register base address
* @param timer_num Timer index in the group
* @param en true to enable, false to disable
*/
static inline void timer_ll_enable_clock(timg_dev_t *hw, uint32_t timer_num, bool en)
{
(void)timer_num; // only one timer in the group
hw->regclk.timer_clk_is_active = en;
}
/**
* @brief Enable alarm event
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param en True: enable alarm
* False: disable alarm
*/
__attribute__((always_inline))
static inline void timer_ll_enable_alarm(timg_dev_t *hw, uint32_t timer_num, bool en)
{
hw->hw_timer[timer_num].config.tx_alarm_en = en;
}
/**
* @brief Set clock prescale for timer
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param divider Prescale value (0 and 1 are not valid)
*/
static inline void timer_ll_set_clock_prescale(timg_dev_t *hw, uint32_t timer_num, uint32_t divider)
{
HAL_ASSERT(divider >= 2 && divider <= 65536);
if (divider >= 65536) {
divider = 0;
}
HAL_FORCE_MODIFY_U32_REG_FIELD(hw->hw_timer[timer_num].config, tx_divider, divider);
hw->hw_timer[timer_num].config.tx_divcnt_rst = 1;
}
/**
* @brief Enable auto-reload mode
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param en True: enable auto reload mode
* False: disable auto reload mode
*/
__attribute__((always_inline))
static inline void timer_ll_enable_auto_reload(timg_dev_t *hw, uint32_t timer_num, bool en)
{
hw->hw_timer[timer_num].config.tx_autoreload = en;
}
/**
* @brief Set count direction
*
* @param hw Timer peripheral register base address
* @param timer_num Timer number in the group
* @param direction Count direction
*/
static inline void timer_ll_set_count_direction(timg_dev_t *hw, uint32_t timer_num, gptimer_count_direction_t direction)
{
hw->hw_timer[timer_num].config.tx_increase = direction == GPTIMER_COUNT_UP;
}
/**
* @brief Enable timer, start couting
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param en True: enable the counter
* False: disable the counter
*/
__attribute__((always_inline))
static inline void timer_ll_enable_counter(timg_dev_t *hw, uint32_t timer_num, bool en)
{
hw->hw_timer[timer_num].config.tx_en = en;
}
/**
* @brief Trigger software capture event
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
*/
__attribute__((always_inline))
static inline void timer_ll_trigger_soft_capture(timg_dev_t *hw, uint32_t timer_num)
{
hw->hw_timer[timer_num].update.tx_update = 1;
// Timer register is in a different clock domain from Timer hardware logic
// We need to wait for the update to take effect before fetching the count value
while (hw->hw_timer[timer_num].update.tx_update) {
}
}
/**
* @brief Get counter value
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
*
* @return counter value
*/
__attribute__((always_inline))
static inline uint64_t timer_ll_get_counter_value(timg_dev_t *hw, uint32_t timer_num)
{
return ((uint64_t) hw->hw_timer[timer_num].hi.tx_hi << 32) | (hw->hw_timer[timer_num].lo.tx_lo);
}
/**
* @brief Set alarm value
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param alarm_value When counter reaches alarm value, alarm event will be triggered
*/
__attribute__((always_inline))
static inline void timer_ll_set_alarm_value(timg_dev_t *hw, uint32_t timer_num, uint64_t alarm_value)
{
hw->hw_timer[timer_num].alarmhi.tx_alarm_hi = (uint32_t) (alarm_value >> 32);
hw->hw_timer[timer_num].alarmlo.tx_alarm_lo = (uint32_t) alarm_value;
}
/**
* @brief Set reload value
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @param reload_val Reload counter value
*/
__attribute__((always_inline))
static inline void timer_ll_set_reload_value(timg_dev_t *hw, uint32_t timer_num, uint64_t load_val)
{
hw->hw_timer[timer_num].loadhi.tx_load_hi = (uint32_t) (load_val >> 32);
hw->hw_timer[timer_num].loadlo.tx_load_lo = (uint32_t) load_val;
}
/**
* @brief Get reload value
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
* @return reload count value
*/
static inline uint64_t timer_ll_get_reload_value(timg_dev_t *hw, uint32_t timer_num)
{
return ((uint64_t)hw->hw_timer[timer_num].loadhi.tx_load_hi << 32) | (hw->hw_timer[timer_num].loadlo.tx_load_lo);
}
/**
* @brief Trigger software reload, value set by `timer_ll_set_reload_value()` will be reflected into counter immediately
*
* @param hw Timer Group register base address
* @param timer_num Timer number in the group
*/
static inline void timer_ll_trigger_soft_reload(timg_dev_t *hw, uint32_t timer_num)
{
hw->hw_timer[timer_num].load.tx_load = 1;
}
/**
* @brief Enable timer interrupt by mask
*
* @param hw Timer Group register base address
* @param mask Mask of interrupt events
* @param en True: enable interrupt
* False: disable interrupt
*/
__attribute__((always_inline))
static inline void timer_ll_enable_intr(timg_dev_t *hw, uint32_t mask, bool en)
{
if (en) {
hw->int_ena_timers.val |= mask;
} else {
hw->int_ena_timers.val &= ~mask;
}
}
/**
* @brief Get interrupt status
*
* @param hw Timer Group register base address
*
* @return Interrupt status
*/
__attribute__((always_inline))
static inline uint32_t timer_ll_get_intr_status(timg_dev_t *hw)
{
return hw->int_st_timers.val & 0x01;
}
/**
* @brief Clear interrupt status by mask
*
* @param hw Timer Group register base address
* @param mask Interrupt events mask
*/
__attribute__((always_inline))
static inline void timer_ll_clear_intr_status(timg_dev_t *hw, uint32_t mask)
{
hw->int_clr_timers.val = mask;
}
/**
* @brief Enable the register clock forever
*
* @param hw Timer Group register base address
* @param en True: Enable the register clock forever
* False: Register clock is enabled only when register operation happens
*/
static inline void timer_ll_enable_register_clock_always_on(timg_dev_t *hw, bool en)
{
hw->regclk.clk_en = en;
}
/**
* @brief Get interrupt status register address
*
* @param hw Timer Group register base address
*
* @return Interrupt status register address
*/
static inline volatile void *timer_ll_get_intr_status_reg(timg_dev_t *hw)
{
return &hw->int_st_timers.val;
}
#ifdef __cplusplus
}
#endif

1025
components/hal/esp32h4/include/hal/uart_ll.h
View File

File diff suppressed because it is too large Load Diff

130
components/hal/esp32h4/include/hal/uhci_ll.h
View File

@ -1,130 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer for UHCI register operations.
// Note that most of the register operations in this layer are non-atomic operations.
#pragma once
#include <stdio.h>
#include "hal/uhci_types.h"
#include "soc/uhci_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
#define UHCI_LL_GET_HW(num) (((num) == 0) ? (&UHCI0) : (NULL))
typedef enum {
UHCI_RX_BREAK_CHR_EOF = 0x1,
UHCI_RX_IDLE_EOF = 0x2,
UHCI_RX_LEN_EOF = 0x4,
UHCI_RX_EOF_MAX = 0x7,
} uhci_rxeof_cfg_t;
static inline void uhci_ll_init(uhci_dev_t *hw)
{
typeof(hw->conf0) conf0_reg;
hw->conf0.clk_en = 1;
conf0_reg.val = 0;
conf0_reg.clk_en = 1;
hw->conf0.val = conf0_reg.val;
hw->conf1.val = 0;
}
static inline void uhci_ll_attach_uart_port(uhci_dev_t *hw, int uart_num)
{
hw->conf0.uart0_ce = (uart_num == 0)? 1: 0;
hw->conf0.uart1_ce = (uart_num == 1)? 1: 0;
}
static inline void uhci_ll_set_seper_chr(uhci_dev_t *hw, uhci_seper_chr_t *seper_char)
{
if (seper_char->sub_chr_en) {
typeof(hw->esc_conf0) esc_conf0_reg = hw->esc_conf0;
esc_conf0_reg.seper_char = seper_char->seper_chr;
esc_conf0_reg.seper_esc_char0 = seper_char->sub_chr1;
esc_conf0_reg.seper_esc_char1 = seper_char->sub_chr2;
hw->esc_conf0.val = esc_conf0_reg.val;
hw->escape_conf.tx_c0_esc_en = 1;
hw->escape_conf.rx_c0_esc_en = 1;
} else {
hw->escape_conf.tx_c0_esc_en = 0;
hw->escape_conf.rx_c0_esc_en = 0;
}
}
static inline void uhci_ll_get_seper_chr(uhci_dev_t *hw, uhci_seper_chr_t *seper_chr)
{
(void)hw;
(void)seper_chr;
}
static inline void uhci_ll_set_swflow_ctrl_sub_chr(uhci_dev_t *hw, uhci_swflow_ctrl_sub_chr_t *sub_ctr)
{
typeof(hw->escape_conf) escape_conf_reg = hw->escape_conf;
if (sub_ctr->flow_en == 1) {
typeof(hw->esc_conf2) esc_conf2_reg = hw->esc_conf2;
typeof(hw->esc_conf3) esc_conf3_reg = hw->esc_conf3;
esc_conf2_reg.seq1 = sub_ctr->xon_chr;
esc_conf2_reg.seq1_char0 = sub_ctr->xon_sub1;
esc_conf2_reg.seq1_char1 = sub_ctr->xon_sub2;
esc_conf3_reg.seq2 = sub_ctr->xoff_chr;
esc_conf3_reg.seq2_char0 = sub_ctr->xoff_sub1;
esc_conf3_reg.seq2_char1 = sub_ctr->xoff_sub2;
escape_conf_reg.tx_11_esc_en = 1;
escape_conf_reg.tx_13_esc_en = 1;
escape_conf_reg.rx_11_esc_en = 1;
escape_conf_reg.rx_13_esc_en = 1;
hw->esc_conf2.val = esc_conf2_reg.val;
hw->esc_conf3.val = esc_conf3_reg.val;
} else {
escape_conf_reg.tx_11_esc_en = 0;
escape_conf_reg.tx_13_esc_en = 0;
escape_conf_reg.rx_11_esc_en = 0;
escape_conf_reg.rx_13_esc_en = 0;
}
hw->escape_conf.val = escape_conf_reg.val;
}
static inline void uhci_ll_enable_intr(uhci_dev_t *hw, uint32_t intr_mask)
{
hw->int_ena.val |= intr_mask;
}
static inline void uhci_ll_disable_intr(uhci_dev_t *hw, uint32_t intr_mask)
{
hw->int_ena.val &= (~intr_mask);
}
static inline void uhci_ll_clear_intr(uhci_dev_t *hw, uint32_t intr_mask)
{
hw->int_clr.val = intr_mask;
}
static inline uint32_t uhci_ll_get_intr(uhci_dev_t *hw)
{
return hw->int_st.val;
}
static inline void uhci_ll_set_eof_mode(uhci_dev_t *hw, uint32_t eof_mode)
{
if (eof_mode & UHCI_RX_BREAK_CHR_EOF) {
hw->conf0.uart_rx_brk_eof_en = 1;
}
if (eof_mode & UHCI_RX_IDLE_EOF) {
hw->conf0.uart_idle_eof_en = 1;
}
if (eof_mode & UHCI_RX_LEN_EOF) {
hw->conf0.len_eof_en = 1;
}
}
#ifdef __cplusplus
}
#endif

46
components/hal/esp32h4/include/hal/uhci_types.h
View File

@ -1,46 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// Though the UHCI driver hasn't been published, some types are defined here
// for users to develop over the HAL. See example: controller_hci_uart_esp32h4
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
/**
* @brief UHCI escape sequence
*/
typedef struct {
uint8_t seper_chr; /*!< escape sequence character */
uint8_t sub_chr1; /*!< escape sequence sub-character 1 */
uint8_t sub_chr2; /*!< escape sequence sub-character 2 */
bool sub_chr_en; /*!< enable use of sub-chaacter of escape sequence */
} uhci_seper_chr_t;
/**
* @brief UHCI software flow control
*/
typedef struct {
uint8_t xon_chr; /*!< character for XON */
uint8_t xon_sub1; /*!< sub-character 1 for XON */
uint8_t xon_sub2; /*!< sub-character 2 for XON */
uint8_t xoff_chr; /*!< character 2 for XOFF */
uint8_t xoff_sub1; /*!< sub-character 1 for XOFF */
uint8_t xoff_sub2; /*!< sub-character 2 for XOFF */
uint8_t flow_en; /*!< enable use of software flow control */
} uhci_swflow_ctrl_sub_chr_t;
#ifdef __cplusplus
}
#endif

34
components/hal/esp32h4/include/hal/usb_phy_ll.h
View File

@ -1,34 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "soc/usb_serial_jtag_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Configures the internal PHY for USB_Serial_JTAG
*
* @param hw Start address of the USB Serial_JTAG registers
*/
static inline void usb_phy_ll_int_jtag_enable(usb_serial_jtag_dev_t *hw)
{
// USB_Serial_JTAG use internal PHY
hw->conf0.phy_sel = 0;
// Disable software control USB D+ D- pullup pulldown (Device FS: dp_pullup = 1)
hw->conf0.pad_pull_override = 0;
// Enable USB D+ pullup
hw->conf0.dp_pullup = 1;
// Enable USB pad function
hw->conf0.usb_pad_enable = 1;
}
#ifdef __cplusplus
}
#endif

173
components/hal/esp32h4/include/hal/usb_serial_jtag_ll.h
View File

@ -1,173 +0,0 @@
/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The LL layer of the USB-serial-jtag controller
#pragma once
#include "hal/misc.h"
#include "soc/usb_serial_jtag_reg.h"
#include "soc/usb_serial_jtag_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
//The in and out endpoints are this long.
#define USB_SERIAL_JTAG_PACKET_SZ_BYTES 64
#define USB_SERIAL_JTAG_LL_INTR_MASK (0x7ffff) //All interrupt mask
// Define USB_SERIAL_JTAG interrupts
// Note the hardware has more interrupts, but they're only useful for debugging
// the hardware.
typedef enum {
USB_SERIAL_JTAG_INTR_SOF = (1 << 1),
USB_SERIAL_JTAG_INTR_SERIAL_OUT_RECV_PKT = (1 << 2),
USB_SERIAL_JTAG_INTR_SERIAL_IN_EMPTY = (1 << 3),
USB_SERIAL_JTAG_INTR_TOKEN_REC_IN_EP1 = (1 << 8),
USB_SERIAL_JTAG_INTR_BUS_RESET = (1 << 9),
USB_SERIAL_JTAG_INTR_EP1_ZERO_PAYLOAD = (1 << 10),
} usb_serial_jtag_intr_t;
/**
* @brief Enable the USB_SERIAL_JTAG interrupt based on the given mask.
*
* @param mask The bitmap of the interrupts need to be enabled.
*
* @return None
*/
static inline void usb_serial_jtag_ll_ena_intr_mask(uint32_t mask)
{
USB_SERIAL_JTAG.int_ena.val |= mask;
}
/**
* @brief Disable the USB_SERIAL_JTAG interrupt based on the given mask.
*
* @param mask The bitmap of the interrupts need to be disabled.
*
* @return None
*/
static inline void usb_serial_jtag_ll_disable_intr_mask(uint32_t mask)
{
USB_SERIAL_JTAG.int_ena.val &= (~mask);
}
/**
* @brief Get the USB_SERIAL_JTAG interrupt status.
*
* @return The USB_SERIAL_JTAG interrupt status.
*/
static inline uint32_t usb_serial_jtag_ll_get_intsts_mask(void)
{
return USB_SERIAL_JTAG.int_st.val;
}
/**
* @brief Get the USB_SERIAL_JTAG raw interrupt status.
*
* @return The USB_SERIAL_JTAG raw interrupt status.
*/
static inline __attribute__((always_inline)) uint32_t usb_serial_jtag_ll_get_intraw_mask(void)
{
return USB_SERIAL_JTAG.int_raw.val;
}
/**
* @brief Clear the USB_SERIAL_JTAG interrupt status based on the given mask.
*
* @param mask The bitmap of the interrupts need to be cleared.
*
* @return None
*/
static inline __attribute__((always_inline)) void usb_serial_jtag_ll_clr_intsts_mask(uint32_t mask)
{
USB_SERIAL_JTAG.int_clr.val = mask;
}
/**
* @brief Get status of enabled interrupt.
*
* @return interrupt enable value
*/
static inline uint32_t usb_serial_jtag_ll_get_intr_ena_status(void)
{
return USB_SERIAL_JTAG.int_ena.val;
}
/**
* @brief Read the bytes from the USB_SERIAL_JTAG rxfifo.
*
* @param buf The data buffer.
* @param rd_len The data length needs to be read.
*
* @return amount of bytes read
*/
static inline int usb_serial_jtag_ll_read_rxfifo(uint8_t *buf, uint32_t rd_len)
{
int i;
for (i = 0; i < (int)rd_len; i++) {
if (!USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail) break;
buf[i] = HAL_FORCE_READ_U32_REG_FIELD(USB_SERIAL_JTAG.ep1, rdwr_byte);
}
return i;
}
/**
* @brief Write byte to the USB_SERIAL_JTAG txfifo. Only writes bytes as long / if there
* is room in the buffer.
*
* @param buf The data buffer.
* @param wr_len The data length needs to be writen.
*
* @return Amount of bytes actually written. May be less than wr_len.
*/
static inline int usb_serial_jtag_ll_write_txfifo(const uint8_t *buf, uint32_t wr_len)
{
int i;
for (i = 0; i < (int)wr_len; i++) {
if (!USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free) break;
HAL_FORCE_MODIFY_U32_REG_FIELD(USB_SERIAL_JTAG.ep1, rdwr_byte, buf[i]);
}
return i;
}
/**
* @brief Returns 1 if the USB_SERIAL_JTAG rxfifo has data available.
*
* @return 0 if no data available, 1 if data available
*/
static inline int usb_serial_jtag_ll_rxfifo_data_available(void)
{
return USB_SERIAL_JTAG.ep1_conf.serial_out_ep_data_avail;
}
/**
* @brief Returns 1 if the USB_SERIAL_JTAG txfifo has room.
*
* @return 0 if no data available, 1 if data available
*/
static inline int usb_serial_jtag_ll_txfifo_writable(void)
{
return USB_SERIAL_JTAG.ep1_conf.serial_in_ep_data_free;
}
/**
* @brief Flushes the TX buffer, that is, make it available for the
* host to pick up.
*
* @return na
*/
static inline void usb_serial_jtag_ll_txfifo_flush(void)
{
USB_SERIAL_JTAG.ep1_conf.wr_done=1;
}
#ifdef __cplusplus
}
#endif

697
components/hal/esp32h4/include/rev1/hal/gpio_ll.h
View File

@ -1,697 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in hal/include/hal/readme.md
******************************************************************************/
// The LL layer for ESP32-H4 GPIO register operations
#pragma once
#include <stdlib.h>
#include <stdbool.h>
#include "soc/soc.h"
#include "soc/gpio_periph.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/gpio_struct.h"
#include "soc/usb_serial_jtag_reg.h"
#include "hal/gpio_types.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
// Get GPIO hardware instance with giving gpio num
#define GPIO_LL_GET_HW(num) (((num) == 0) ? (&GPIO) : NULL)
#define GPIO_LL_PRO_CPU_INTR_ENA (BIT(0))
#define GPIO_LL_PRO_CPU_NMI_INTR_ENA (BIT(1))
/**
* @brief Enable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Disable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
// The pull-up value of the USB pins are controlled by the pins’ pull-up value together with USB pull-up value
// USB DP pin is default to PU enabled
if (gpio_num == USB_DP_GPIO_NUM) {
SET_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_PAD_PULL_OVERRIDE);
CLEAR_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_DP_PULLUP);
}
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Enable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief Disable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief GPIO set interrupt trigger type
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param intr_type Interrupt type, select from gpio_int_type_t
*/
static inline void gpio_ll_set_intr_type(gpio_dev_t *hw, uint32_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].pin_int_type = intr_type;
}
/**
* @brief Get GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status
*/
__attribute__((always_inline))
static inline void gpio_ll_get_intr_status(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = hw->pcpu_int.procpu_int;
}
/**
* @brief Get GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status high
*/
__attribute__((always_inline))
static inline void gpio_ll_get_intr_status_high(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = hw->pcpu_int1.procpu_int1;
}
/**
* @brief Clear GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status clear mask
*/
__attribute__((always_inline))
static inline void gpio_ll_clear_intr_status(gpio_dev_t *hw, uint32_t mask)
{
hw->status_w1tc.status_w1tc = mask;
}
/**
* @brief Clear GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status high clear mask
*/
__attribute__((always_inline))
static inline void gpio_ll_clear_intr_status_high(gpio_dev_t *hw, uint32_t mask)
{
hw->status1_w1tc.status1_w1tc = mask;
}
/**
* @brief Enable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id Interrupt enabled CPU to corresponding ID
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
__attribute__((always_inline))
static inline void gpio_ll_intr_enable_on_core(gpio_dev_t *hw, uint32_t core_id, uint32_t gpio_num)
{
HAL_ASSERT(core_id == 0 && "target SoC only has a single core");
GPIO.pin[gpio_num].pin_int_ena = GPIO_LL_PRO_CPU_INTR_ENA; //enable pro cpu intr
}
/**
* @brief Disable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
__attribute__((always_inline))
static inline void gpio_ll_intr_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_int_ena = 0; //disable GPIO intr
}
/**
* @brief Disable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pin filter
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
*/
static inline void gpio_ll_pin_filter_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_FILTER_EN(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pin filter
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
*/
static inline void gpio_ll_pin_filter_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_FILTER_DIS(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1tc.enable_w1tc = (0x1 << gpio_num);
} else {
hw->enable1_w1tc.enable1_w1tc = (0x1 << (gpio_num - 32));
}
// Ensure no other output signal is routed via GPIO matrix to this pin
REG_WRITE(GPIO_FUNC0_OUT_SEL_CFG_REG + (gpio_num * 4),
SIG_GPIO_OUT_IDX);
}
/**
* @brief Enable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline __attribute__((always_inline)) void gpio_ll_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1ts.enable_w1ts = (0x1 << gpio_num);
} else {
hw->enable1_w1ts.enable1_w1ts = (0x1 << (gpio_num - 32));
}
}
/**
* @brief Disable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline __attribute__((always_inline)) void gpio_ll_od_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_pad_driver = 0;
}
/**
* @brief Enable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_pad_driver = 1;
}
/**
* @brief Select a function for the pin in the IOMUX
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
* @param func Function to assign to the pin
*/
static inline __attribute__((always_inline)) void gpio_ll_func_sel(gpio_dev_t *hw, uint8_t gpio_num, uint32_t func)
{
// Disable USB Serial JTAG if pins 18 or pins 19 needs to select an IOMUX function
if (gpio_num == USB_DM_GPIO_NUM || gpio_num == USB_DP_GPIO_NUM) {
CLEAR_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_USB_PAD_ENABLE);
}
PIN_FUNC_SELECT(IO_MUX_GPIO0_REG + (gpio_num * 4), func);
}
/**
* @brief GPIO set output level
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param level Output level. 0: low ; 1: high
*/
__attribute__((always_inline))
static inline void gpio_ll_set_level(gpio_dev_t *hw, uint32_t gpio_num, uint32_t level)
{
if (level) {
if (gpio_num < 32) {
hw->out_w1ts.out_w1ts = (1 << gpio_num);
} else {
hw->out1_w1ts.out1_w1ts = (1 << (gpio_num - 32));
}
} else {
if (gpio_num < 32) {
hw->out_w1tc.out_w1tc = (1 << gpio_num);
} else {
hw->out1_w1tc.out1_w1tc = (1 << (gpio_num - 32));
}
}
}
/**
* @brief GPIO get input level
*
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
*
* @return
* - 0 the GPIO input level is 0
* - 1 the GPIO input level is 1
*/
static inline int gpio_ll_get_level(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num < 32) {
return (hw->in.in_data_next >> gpio_num) & 0x1;
} else {
return (hw->in1.in1_data_next >> (gpio_num - 32)) & 0x1;
}
}
/**
* @brief Enable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
*/
static inline void gpio_ll_wakeup_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_wakeup_enable = 0x1;
}
/**
* @brief Disable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_wakeup_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_wakeup_enable = 0;
}
/**
* @brief Set GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Drive capability of the pad
*/
static inline void gpio_ll_set_drive_capability(gpio_dev_t *hw, uint32_t gpio_num, gpio_drive_cap_t strength)
{
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
}
/**
* @brief Get GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Pointer to accept drive capability of the pad
*/
static inline void gpio_ll_get_drive_capability(gpio_dev_t *hw, uint32_t gpio_num, gpio_drive_cap_t *strength)
{
*strength = (gpio_drive_cap_t)GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
}
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_en(gpio_dev_t *hw)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_dis(gpio_dev_t *hw)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
}
/**
* @brief Get deep sleep hold status
*
* @param hw Peripheral GPIO hardware instance address.
*
* @return
* - true deep sleep hold is enabled
* - false deep sleep hold is disabled
*/
__attribute__((always_inline))
static inline bool gpio_ll_deep_sleep_hold_is_en(gpio_dev_t *hw)
{
return !GET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD) && GET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Enable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_en(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num <= GPIO_NUM_5) {
REG_SET_BIT(RTC_CNTL_PAD_HOLD_REG, BIT(gpio_num));
} else if (gpio_num <= GPIO_NUM_31) {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
} else {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD1_REG, GPIO_HOLD_MASK[gpio_num]);
}
}
/**
* @brief Disable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num <= GPIO_NUM_5) {
REG_CLR_BIT(RTC_CNTL_PAD_HOLD_REG, BIT(gpio_num));
} else if (gpio_num <= GPIO_NUM_31) {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD1_REG, GPIO_HOLD_MASK[gpio_num]);
}
}
/**
* @brief Get digital gpio pad hold status.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*
* @note caller must ensure that gpio_num is a digital io pad
*
* @return
* - true digital gpio pad is held
* - false digital gpio pad is unheld
*/
__attribute__((always_inline))
static inline bool gpio_ll_is_digital_io_hold(gpio_dev_t *hw, uint32_t gpio_num)
{
return GET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, BIT(gpio_num));
}
/**
* @brief Set pad input to a peripheral signal through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
*/
__attribute__((always_inline))
static inline void gpio_ll_iomux_in(gpio_dev_t *hw, uint32_t gpio, uint32_t signal_idx)
{
hw->func_in_sel_cfg[signal_idx].sig_in_sel = 0;
PIN_INPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio * 4));
}
/**
* @brief Select a function for the pin in the IOMUX
*
* @param pin_name Pin name to configure
* @param func Function to assign to the pin
*/
static inline void gpio_ll_iomux_func_sel(uint32_t pin_name, uint32_t func)
{
// Disable USB Serial JTAG if pins 18 or pins 19 needs to select an IOMUX function
if (pin_name == IO_MUX_GPIO18_REG || pin_name == IO_MUX_GPIO19_REG) {
CLEAR_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_USB_PAD_ENABLE);
}
PIN_FUNC_SELECT(pin_name, func);
}
/**
* @brief Set peripheral output to an GPIO pad through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
static inline void gpio_ll_iomux_out(gpio_dev_t *hw, uint8_t gpio_num, int func, uint32_t oen_inv)
{
hw->func_out_sel_cfg[gpio_num].func_oen_sel = 0;
hw->func_out_sel_cfg[gpio_num].func_oen_inv_sel = oen_inv;
gpio_ll_iomux_func_sel(GPIO_PIN_MUX_REG[gpio_num], func);
}
/**
* @brief Force hold all digital(VDD3P3_CPU) and rtc(VDD3P3_RTC) gpio pads.
* @note GPIO force hold, whether the chip in sleep mode or wakeup mode.
*/
static inline void gpio_ll_force_hold_all(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
SET_PERI_REG_MASK(RTC_CNTL_PWC_REG, RTC_CNTL_PAD_FORCE_HOLD_M);
}
/**
* @brief Force unhold all digital(VDD3P3_CPU) and rtc(VDD3P3_RTC) gpio pads.
* @note GPIO force unhold, whether the chip in sleep mode or wakeup mode.
*/
static inline void gpio_ll_force_unhold_all(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
CLEAR_PERI_REG_MASK(RTC_CNTL_PWC_REG, RTC_CNTL_PAD_FORCE_HOLD_M);
}
/**
* @brief Enable GPIO pin used for wakeup from sleep.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pin used for wakeup from sleep.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pull-up in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pull-up in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pull-down in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pull-down in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO input in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO input in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO output in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO output in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO deep-sleep wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
*/
static inline void gpio_ll_deepsleep_wakeup_enable(gpio_dev_t *hw, uint32_t gpio_num, gpio_int_type_t intr_type)
{
HAL_ASSERT(gpio_num <= GPIO_NUM_5 && "gpio larger than 5 does not support deep sleep wake-up function");
REG_SET_BIT(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_PIN_CLK_GATE);
REG_SET_BIT(RTC_CNTL_EXT_WAKEUP_CONF_REG, RTC_CNTL_GPIO_WAKEUP_FILTER);
SET_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - gpio_num));
uint32_t reg = REG_READ(RTC_CNTL_GPIO_WAKEUP_REG);
reg &= (~(RTC_CNTL_GPIO_PIN0_INT_TYPE_V << (RTC_CNTL_GPIO_PIN0_INT_TYPE_S - gpio_num * 3)));
reg |= (intr_type << (RTC_CNTL_GPIO_PIN0_INT_TYPE_S - gpio_num * 3));
REG_WRITE(RTC_CNTL_GPIO_WAKEUP_REG, reg);
}
/**
* @brief Disable GPIO deep-sleep wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_deepsleep_wakeup_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
HAL_ASSERT(gpio_num <= GPIO_NUM_5 && "gpio larger than 5 does not support deep sleep wake-up function");
CLEAR_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - gpio_num));
CLEAR_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_PIN0_INT_TYPE_S - gpio_num * 3);
}
/**
* @brief Get the status of whether an IO is used for deep-sleep wake-up.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
* @return True if the pin is enabled to wake up from deep-sleep
*/
static inline bool gpio_ll_deepsleep_wakeup_is_enabled(gpio_dev_t *hw, uint32_t gpio_num)
{
HAL_ASSERT(gpio_num <= GPIO_NUM_5 && "gpio larger than 5 does not support deep sleep wake-up function");
return GET_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - gpio_num));
}
#ifdef __cplusplus
}
#endif

627
components/hal/esp32h4/include/rev2/hal/gpio_ll.h
View File

@ -1,627 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in hal/include/hal/readme.md
******************************************************************************/
// The LL layer for ESP32-H4 GPIO register operations
#pragma once
#include <stdlib.h>
#include <stdbool.h>
#include "soc/soc.h"
#include "soc/gpio_periph.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/gpio_struct.h"
#include "soc/usb_serial_jtag_reg.h"
#include "hal/gpio_types.h"
#include "hal/assert.h"
#ifdef __cplusplus
extern "C" {
#endif
// Get GPIO hardware instance with giving gpio num
#define GPIO_LL_GET_HW(num) (((num) == 0) ? (&GPIO) : NULL)
#define GPIO_LL_PRO_CPU_INTR_ENA (BIT(0))
#define GPIO_LL_PRO_CPU_NMI_INTR_ENA (BIT(1))
/**
* @brief Enable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Disable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
// The pull-up value of the USB pins are controlled by the pins’ pull-up value together with USB pull-up value
// USB DP pin is default to PU enabled
if (gpio_num == USB_DP_GPIO_NUM) {
SET_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_PAD_PULL_OVERRIDE);
CLEAR_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_DP_PULLUP);
}
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Enable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief Disable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief GPIO set interrupt trigger type
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param intr_type Interrupt type, select from gpio_int_type_t
*/
static inline void gpio_ll_set_intr_type(gpio_dev_t *hw, uint32_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].pin_int_type = intr_type;
}
/**
* @brief Get GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status
*/
__attribute__((always_inline))
static inline void gpio_ll_get_intr_status(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = hw->pcpu_int.procpu_int;
}
/**
* @brief Get GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status high
*/
__attribute__((always_inline))
static inline void gpio_ll_get_intr_status_high(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = 0; // Less than 32 GPIOs in ESP32-H4Beta2
}
/**
* @brief Clear GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status clear mask
*/
__attribute__((always_inline))
static inline void gpio_ll_clear_intr_status(gpio_dev_t *hw, uint32_t mask)
{
hw->status_w1tc.status_w1tc = mask;
}
/**
* @brief Clear GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status high clear mask
*/
__attribute__((always_inline))
static inline void gpio_ll_clear_intr_status_high(gpio_dev_t *hw, uint32_t mask)
{
// Less than 32 GPIOs in ESP32-H4Beta2. Do nothing.
}
/**
* @brief Enable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id Interrupt enabled CPU to corresponding ID
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
__attribute__((always_inline))
static inline void gpio_ll_intr_enable_on_core(gpio_dev_t *hw, uint32_t core_id, uint32_t gpio_num)
{
HAL_ASSERT(core_id == 0 && "target SoC only has a single core");
GPIO.pin[gpio_num].pin_int_ena = GPIO_LL_PRO_CPU_INTR_ENA; //enable pro cpu intr
}
/**
* @brief Disable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
__attribute__((always_inline))
static inline void gpio_ll_intr_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_int_ena = 0; //disable GPIO intr
}
/**
* @brief Disable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pin filter
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
*/
static inline void gpio_ll_pin_filter_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_FILTER_EN(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pin filter
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
*/
static inline void gpio_ll_pin_filter_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_FILTER_DIS(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->enable_w1tc.enable_w1tc = (0x1 << gpio_num);
// Ensure no other output signal is routed via GPIO matrix to this pin
REG_WRITE(GPIO_FUNC0_OUT_SEL_CFG_REG + (gpio_num * 4),
SIG_GPIO_OUT_IDX);
}
/**
* @brief Enable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline __attribute__((always_inline)) void gpio_ll_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->enable_w1ts.enable_w1ts = (0x1 << gpio_num);
}
/**
* @brief Disable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline __attribute__((always_inline)) void gpio_ll_od_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_pad_driver = 0;
}
/**
* @brief Enable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_pad_driver = 1;
}
/**
* @brief GPIO set output level
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param level Output level. 0: low ; 1: high
*/
__attribute__((always_inline))
static inline void gpio_ll_set_level(gpio_dev_t *hw, uint32_t gpio_num, uint32_t level)
{
if (level) {
hw->out_w1ts.out_w1ts = (1 << gpio_num);
} else {
hw->out_w1tc.out_w1tc = (1 << gpio_num);
}
}
/**
* @brief GPIO get input level
*
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
*
* @return
* - 0 the GPIO input level is 0
* - 1 the GPIO input level is 1
*/
static inline int gpio_ll_get_level(gpio_dev_t *hw, uint32_t gpio_num)
{
return (hw->in.in_data_next >> gpio_num) & 0x1;
}
/**
* @brief Enable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
*/
static inline void gpio_ll_wakeup_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_wakeup_enable = 0x1;
}
/**
* @brief Disable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_wakeup_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
hw->pin[gpio_num].pin_wakeup_enable = 0;
}
/**
* @brief Set GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Drive capability of the pad
*/
static inline void gpio_ll_set_drive_capability(gpio_dev_t *hw, uint32_t gpio_num, gpio_drive_cap_t strength)
{
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
}
/**
* @brief Get GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Pointer to accept drive capability of the pad
*/
static inline void gpio_ll_get_drive_capability(gpio_dev_t *hw, uint32_t gpio_num, gpio_drive_cap_t *strength)
{
*strength = (gpio_drive_cap_t)GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
}
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_en(gpio_dev_t *hw)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_dis(gpio_dev_t *hw)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
}
/**
* @brief Enable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_en(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num >= GPIO_NUM_7 && gpio_num <= GPIO_NUM_12) {
REG_SET_BIT(RTC_CNTL_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
} else {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
}
/**
* @brief Disable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
if (gpio_num >= GPIO_NUM_7 && gpio_num <= GPIO_NUM_12) {
REG_CLR_BIT(RTC_CNTL_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
}
/**
* @brief Set pad input to a peripheral signal through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
*/
__attribute__((always_inline))
static inline void gpio_ll_iomux_in(gpio_dev_t *hw, uint32_t gpio, uint32_t signal_idx)
{
hw->func_in_sel_cfg[signal_idx].sig_in_sel = 0;
PIN_INPUT_ENABLE(IO_MUX_GPIO0_REG + (gpio * 4));
}
/**
* @brief Select a function for the pin in the IOMUX
*
* @param pin_name Pin name to configure
* @param func Function to assign to the pin
*/
static inline __attribute__((always_inline)) void gpio_ll_iomux_func_sel(uint32_t pin_name, uint32_t func)
{
// Disable USB Serial JTAG if pin 24 or pin 25 needs to select an IOMUX function
if (pin_name == IO_MUX_GPIO24_REG || pin_name == IO_MUX_GPIO25_REG) {
CLEAR_PERI_REG_MASK(USB_SERIAL_JTAG_CONF0_REG, USB_SERIAL_JTAG_USB_PAD_ENABLE);
}
PIN_FUNC_SELECT(pin_name, func);
}
/**
* @brief Set peripheral output to an GPIO pad through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
static inline void gpio_ll_iomux_out(gpio_dev_t *hw, uint8_t gpio_num, int func, uint32_t oen_inv)
{
hw->func_out_sel_cfg[gpio_num].func_oen_sel = 0;
hw->func_out_sel_cfg[gpio_num].func_oen_inv_sel = oen_inv;
gpio_ll_iomux_func_sel(GPIO_PIN_MUX_REG[gpio_num], func);
}
/**
* @brief Force hold all digital(VDD3P3_CPU) and rtc(VDD3P3_RTC) gpio pads.
* @note GPIO force hold, whether the chip in sleep mode or wakeup mode.
*/
static inline void gpio_ll_force_hold_all(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
SET_PERI_REG_MASK(RTC_CNTL_PWC_REG, RTC_CNTL_PAD_FORCE_HOLD_M);
}
/**
* @brief Force unhold all digital(VDD3P3_CPU) and rtc(VDD3P3_RTC) gpio pads.
* @note GPIO force unhold, whether the chip in sleep mode or wakeup mode.
*/
static inline void gpio_ll_force_unhold_all(void)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
CLEAR_PERI_REG_MASK(RTC_CNTL_PWC_REG, RTC_CNTL_PAD_FORCE_HOLD_M);
}
/**
* @brief Enable GPIO pin used for wakeup from sleep.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_sel_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_SEL_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pin used for wakeup from sleep.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_sel_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_SEL_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pull-up in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pullup_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLUP_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pull-up in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pullup_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLUP_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO pull-down in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pulldown_en(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLDOWN_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO pull-down in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_pulldown_dis(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_PULLDOWN_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO input in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_input_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO input in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_input_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable GPIO output in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_output_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_OUTPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO output in sleep mode.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_sleep_output_enable(gpio_dev_t *hw, uint32_t gpio_num)
{
PIN_SLP_OUTPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable GPIO deep-sleep wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
*/
static inline void gpio_ll_deepsleep_wakeup_enable(gpio_dev_t *hw, uint32_t gpio_num, gpio_int_type_t intr_type)
{
HAL_ASSERT((gpio_num >= GPIO_NUM_7 && gpio_num <= GPIO_NUM_12) &&
"only gpio7~12 support deep sleep wake-up function");
REG_SET_BIT(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_PIN_CLK_GATE);
REG_SET_BIT(RTC_CNTL_EXT_WAKEUP_CONF_REG, RTC_CNTL_GPIO_WAKEUP_FILTER);
SET_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - (gpio_num - 7)));
uint32_t reg = REG_READ(RTC_CNTL_GPIO_WAKEUP_REG);
reg &= (~(RTC_CNTL_GPIO_PIN0_INT_TYPE_V << (RTC_CNTL_GPIO_PIN0_INT_TYPE_S - (gpio_num - 7) * 3)));
reg |= (intr_type << (RTC_CNTL_GPIO_PIN0_INT_TYPE_S - (gpio_num - 7) * 3));
REG_WRITE(RTC_CNTL_GPIO_WAKEUP_REG, reg);
}
/**
* @brief Disable GPIO deep-sleep wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_deepsleep_wakeup_disable(gpio_dev_t *hw, uint32_t gpio_num)
{
HAL_ASSERT((gpio_num >= GPIO_NUM_7 && gpio_num <= GPIO_NUM_12) &&
"only gpio7~12 support deep sleep wake-up function");
CLEAR_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - (gpio_num - 7)));
CLEAR_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, RTC_CNTL_GPIO_PIN0_INT_TYPE_S - (gpio_num - 7) * 3);
}
/**
* @brief Get the status of whether an IO is used for deep-sleep wake-up.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
* @return True if the pin is enabled to wake up from deep-sleep
*/
static inline bool gpio_ll_deepsleep_wakeup_is_enabled(gpio_dev_t *hw, uint32_t gpio_num)
{
HAL_ASSERT((gpio_num >= GPIO_NUM_7 && gpio_num <= GPIO_NUM_12) &&
"only gpio7~12 support deep sleep wake-up function");
return GET_PERI_REG_MASK(RTC_CNTL_GPIO_WAKEUP_REG, 1 << (RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S - (gpio_num - 7)));
}
#ifdef __cplusplus
}
#endif

68
components/hal/esp32h4/rtc_cntl_hal.c
View File

@ -1,68 +0,0 @@
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// The HAL layer for RTC CNTL (common part)
#include "soc/soc_caps.h"
#include "soc/lldesc.h"
#include "hal/rtc_hal.h"
#include "hal/assert.h"
#include "esp_attr.h"
#define RTC_CNTL_HAL_LINK_BUF_SIZE_MIN (SOC_RTC_CNTL_CPU_PD_DMA_BLOCK_SIZE) /* The minimum size of dma link buffer */
typedef struct rtc_cntl_link_buf_conf {
uint32_t cfg[4]; /* 4 word for dma link buffer configuration */
} rtc_cntl_link_buf_conf_t;
void * rtc_cntl_hal_dma_link_init(void *elem, void *buff, int size, void *next)
{
HAL_ASSERT(elem != NULL);
HAL_ASSERT(buff != NULL);
HAL_ASSERT(size >= RTC_CNTL_HAL_LINK_BUF_SIZE_MIN);
lldesc_t *plink = (lldesc_t *)elem;
plink->eof = next ? 0 : 1;
plink->owner = 1;
plink->size = size >> 4; /* in unit of 16 bytes */
plink->length = size >> 4;
plink->buf = buff;
plink->offset = 0;
plink->sosf = 0;
STAILQ_NEXT(plink, qe) = next;
return (void *)plink;
}
#if SOC_PM_SUPPORT_CPU_PD
void rtc_cntl_hal_enable_cpu_retention(void *addr)
{
if (addr) {
lldesc_t *plink = (lldesc_t *)addr;
/* dma link buffer configure */
rtc_cntl_link_buf_conf_t *pbuf = (rtc_cntl_link_buf_conf_t *)plink->buf;
pbuf->cfg[0] = 0;
pbuf->cfg[1] = 0;
pbuf->cfg[2] = 0;
pbuf->cfg[3] = (uint32_t)-1;
rtc_cntl_ll_enable_cpu_retention((uint32_t)addr);
}
}
void IRAM_ATTR rtc_cntl_hal_disable_cpu_retention(void *addr)
{
rtc_cntl_sleep_retent_t *retent = (rtc_cntl_sleep_retent_t *)addr;
if (addr) {
if (retent->cpu_pd_mem) {
rtc_cntl_ll_disable_cpu_retention();
}
}
}
#endif // SOC_PM_SUPPORT_CPU_PD

2
components/hal/include/hal/adc_types.h
View File

@ -144,7 +144,7 @@ typedef struct {
};
} adc_digi_output_data_t;
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H4 || CONFIG_IDF_TARGET_ESP32C2
#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2
/**
* @brief ADC digital controller (DMA mode) output data format.
* Used to analyze the acquired ADC (DMA) data.

2
components/hal/include/hal/adc_types_private.h
View File

@ -70,7 +70,7 @@ typedef enum {
* MONITOR_LOW: If ADC_OUT < threshold, Generates monitor interrupt.
*/
typedef enum {
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H4 || CONFIG_IDF_TARGET_ESP32C2
#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2
ADC_DIGI_MONITOR_DIS = 0, /*!<Disable monitor. */
ADC_DIGI_MONITOR_EN, /*!<If ADC_OUT < threshold, Generates monitor interrupt. */
/*!<If ADC_OUT > threshold, Generates monitor interrupt. */

79
components/hal/include/hal/gpio_types.h
View File

@ -242,85 +242,6 @@ typedef enum {
GPIO_NUM_MAX,
/** @endcond */
} gpio_num_t;
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
typedef enum {
GPIO_NUM_NC = -1, /*!< Use to signal not connected to S/W */
GPIO_NUM_0 = 0, /*!< GPIO0, input and output */
GPIO_NUM_1 = 1, /*!< GPIO1, input and output */
GPIO_NUM_2 = 2, /*!< GPIO2, input and output */
GPIO_NUM_3 = 3, /*!< GPIO3, input and output */
GPIO_NUM_4 = 4, /*!< GPIO4, input and output */
GPIO_NUM_5 = 5, /*!< GPIO5, input and output */
GPIO_NUM_6 = 6, /*!< GPIO6, input and output */
GPIO_NUM_7 = 7, /*!< GPIO7, input and output */
GPIO_NUM_8 = 8, /*!< GPIO8, input and output */
GPIO_NUM_9 = 9, /*!< GPIO9, input and output */
GPIO_NUM_10 = 10, /*!< GPIO10, input and output */
GPIO_NUM_11 = 11, /*!< GPIO11, input and output */
GPIO_NUM_12 = 12, /*!< GPIO12, input and output */
GPIO_NUM_13 = 13, /*!< GPIO13, input and output */
GPIO_NUM_14 = 14, /*!< GPIO14, input and output */
GPIO_NUM_15 = 15, /*!< GPIO15, input and output */
GPIO_NUM_16 = 16, /*!< GPIO16, input and output */
GPIO_NUM_17 = 17, /*!< GPIO17, input and output */
GPIO_NUM_18 = 18, /*!< GPIO18, input and output */
GPIO_NUM_19 = 19, /*!< GPIO19, input and output */
GPIO_NUM_20 = 20, /*!< GPIO20, input and output */
GPIO_NUM_21 = 21, /*!< GPIO21, input and output */
GPIO_NUM_22 = 22, /*!< GPIO22, input and output */
GPIO_NUM_23 = 23, /*!< GPIO23, input and output */
GPIO_NUM_24 = 24, /*!< GPIO24, input and output */
GPIO_NUM_25 = 25, /*!< GPIO25, input and output */
GPIO_NUM_26 = 26, /*!< GPIO26, input and output */
GPIO_NUM_27 = 27, /*!< GPIO27, input and output */
GPIO_NUM_28 = 28, /*!< GPIO28, input and output */
GPIO_NUM_29 = 29, /*!< GPIO29, input and output */
GPIO_NUM_30 = 30, /*!< GPIO30, input and output */
GPIO_NUM_31 = 31, /*!< GPIO31, input and output */
GPIO_NUM_32 = 32, /*!< GPIO32, input and output */
GPIO_NUM_33 = 33, /*!< GPIO33, input and output */
GPIO_NUM_34 = 34, /*!< GPIO34, input and output */
GPIO_NUM_35 = 35, /*!< GPIO35, input and output */
GPIO_NUM_36 = 36, /*!< GPIO36, input and output */
GPIO_NUM_37 = 37, /*!< GPIO37, input and output */
GPIO_NUM_38 = 38, /*!< GPIO38, input and output */
GPIO_NUM_39 = 39, /*!< GPIO39, input and output */
GPIO_NUM_40 = 40, /*!< GPIO40, input and output */
GPIO_NUM_MAX,
/** @endcond */
} gpio_num_t;
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2
typedef enum {
GPIO_NUM_NC = -1, /*!< Use to signal not connected to S/W */
GPIO_NUM_0 = 0, /*!< GPIO0, input and output */
GPIO_NUM_1 = 1, /*!< GPIO1, input and output */
GPIO_NUM_2 = 2, /*!< GPIO2, input and output */
GPIO_NUM_3 = 3, /*!< GPIO3, input and output */
GPIO_NUM_4 = 4, /*!< GPIO4, input and output */
GPIO_NUM_5 = 5, /*!< GPIO5, input and output */
GPIO_NUM_6 = 6, /*!< GPIO6, input and output */
GPIO_NUM_7 = 7, /*!< GPIO7, input and output */
GPIO_NUM_8 = 8, /*!< GPIO8, input and output */
GPIO_NUM_9 = 9, /*!< GPIO9, input and output */
GPIO_NUM_10 = 10, /*!< GPIO10, input and output */
GPIO_NUM_11 = 11, /*!< GPIO11, input and output */
GPIO_NUM_12 = 12, /*!< GPIO12, input and output */
GPIO_NUM_13 = 13, /*!< GPIO13, input and output */
GPIO_NUM_14 = 14, /*!< GPIO14, input and output */
GPIO_NUM_15 = 15, /*!< GPIO15, input and output */
GPIO_NUM_16 = 16, /*!< GPIO16, input and output */
GPIO_NUM_17 = 17, /*!< GPIO17, input and output */
GPIO_NUM_18 = 18, /*!< GPIO18, input and output */
GPIO_NUM_19 = 19, /*!< GPIO19, input and output */
GPIO_NUM_20 = 20, /*!< GPIO20, input and output */
GPIO_NUM_21 = 21, /*!< GPIO21, input and output */
GPIO_NUM_22 = 22, /*!< GPIO22, input and output */
GPIO_NUM_23 = 23, /*!< GPIO23, input and output */
GPIO_NUM_24 = 24, /*!< GPIO24, input and output */
GPIO_NUM_25 = 25, /*!< GPIO25, input and output */
GPIO_NUM_MAX,
/** @endcond */
} gpio_num_t;
#elif CONFIG_IDF_TARGET_ESP32C2
typedef enum {
GPIO_NUM_NC = -1, /*!< Use to signal not connected to S/W */

2
components/hal/include/hal/sha_types.h
View File

@ -17,8 +17,6 @@
#include "esp32s3/rom/sha.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/sha.h"
#elif CONFIG_IDF_TARGET_ESP32H4
#include "esp32h4/rom/sha.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rom/sha.h"
#elif CONFIG_IDF_TARGET_ESP32C6

7
components/soc/CMakeLists.txt
View File

@ -13,13 +13,6 @@ set(includes "include" "${target}")
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/${target}/include")
list(APPEND includes "${target}/include")
if(target STREQUAL "esp32h4")
if(CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1)
list(APPEND includes "${target}/include/rev1")
elseif(CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2)
list(APPEND includes "${target}/include/rev2")
endif()
endif()
endif()
if(target STREQUAL "esp32")

15
components/soc/esp32h4/adc_periph.c
View File

@ -1,15 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/adc_periph.h"
/* Store IO number corresponding to the ADC channel number. */
const int adc_channel_io_map[SOC_ADC_PERIPH_NUM][SOC_ADC_MAX_CHANNEL_NUM] = {
/* ADC1 */
{
ADC1_CHANNEL_0_GPIO_NUM, ADC1_CHANNEL_1_GPIO_NUM, ADC1_CHANNEL_2_GPIO_NUM, ADC1_CHANNEL_3_GPIO_NUM, ADC1_CHANNEL_4_GPIO_NUM
}
};

37
components/soc/esp32h4/dedic_gpio_periph.c
View File

@ -1,37 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/gpio_sig_map.h"
#include "soc/dedic_gpio_periph.h"
const dedic_gpio_signal_conn_t dedic_gpio_periph_signals = {
.module = -1,
.irq = -1,
.cores = {
[0] = {
.in_sig_per_channel = {
[0] = CPU_GPIO_IN0_IDX,
[1] = CPU_GPIO_IN1_IDX,
[2] = CPU_GPIO_IN2_IDX,
[3] = CPU_GPIO_IN3_IDX,
[4] = CPU_GPIO_IN4_IDX,
[5] = CPU_GPIO_IN5_IDX,
[6] = CPU_GPIO_IN6_IDX,
[7] = CPU_GPIO_IN7_IDX,
},
.out_sig_per_channel = {
[0] = CPU_GPIO_OUT0_IDX,
[1] = CPU_GPIO_OUT1_IDX,
[2] = CPU_GPIO_OUT2_IDX,
[3] = CPU_GPIO_OUT3_IDX,
[4] = CPU_GPIO_OUT4_IDX,
[5] = CPU_GPIO_OUT5_IDX,
[6] = CPU_GPIO_OUT6_IDX,
[7] = CPU_GPIO_OUT7_IDX,
}
},
},
};

29
components/soc/esp32h4/gdma_periph.c
View File

@ -1,29 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/gdma_periph.h"
const gdma_signal_conn_t gdma_periph_signals = {
.groups = {
[0] = {
.module = PERIPH_GDMA_MODULE,
.pairs = {
[0] = {
.rx_irq_id = ETS_DMA_CH0_INTR_SOURCE,
.tx_irq_id = ETS_DMA_CH0_INTR_SOURCE,
},
[1] = {
.rx_irq_id = ETS_DMA_CH1_INTR_SOURCE,
.tx_irq_id = ETS_DMA_CH1_INTR_SOURCE,
},
[2] = {
.rx_irq_id = ETS_DMA_CH2_INTR_SOURCE,
.tx_irq_id = ETS_DMA_CH2_INTR_SOURCE,
}
}
}
}
};

130
components/soc/esp32h4/gpio_periph.c
View File

@ -1,130 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/gpio_periph.h"
const uint32_t GPIO_PIN_MUX_REG[] = {
IO_MUX_GPIO0_REG,
IO_MUX_GPIO1_REG,
IO_MUX_GPIO2_REG,
IO_MUX_GPIO3_REG,
IO_MUX_GPIO4_REG,
IO_MUX_GPIO5_REG,
IO_MUX_GPIO6_REG,
IO_MUX_GPIO7_REG,
IO_MUX_GPIO8_REG,
IO_MUX_GPIO9_REG,
IO_MUX_GPIO10_REG,
IO_MUX_GPIO11_REG,
IO_MUX_GPIO12_REG,
IO_MUX_GPIO13_REG,
IO_MUX_GPIO14_REG,
IO_MUX_GPIO15_REG,
IO_MUX_GPIO16_REG,
IO_MUX_GPIO17_REG,
IO_MUX_GPIO18_REG,
IO_MUX_GPIO19_REG,
IO_MUX_GPIO20_REG,
IO_MUX_GPIO21_REG,
IO_MUX_GPIO22_REG,
IO_MUX_GPIO23_REG,
IO_MUX_GPIO24_REG,
IO_MUX_GPIO25_REG,
#if CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
IO_MUX_GPIO26_REG,
IO_MUX_GPIO27_REG,
IO_MUX_GPIO28_REG,
IO_MUX_GPIO29_REG,
IO_MUX_GPIO30_REG,
IO_MUX_GPIO31_REG,
IO_MUX_GPIO32_REG,
IO_MUX_GPIO33_REG,
IO_MUX_GPIO34_REG,
IO_MUX_GPIO35_REG,
IO_MUX_GPIO36_REG,
IO_MUX_GPIO37_REG,
IO_MUX_GPIO38_REG,
IO_MUX_GPIO39_REG,
IO_MUX_GPIO40_REG,
#endif
};
_Static_assert(sizeof(GPIO_PIN_MUX_REG) == SOC_GPIO_PIN_COUNT * sizeof(uint32_t), "Invalid size of GPIO_PIN_MUX_REG");
const uint32_t GPIO_HOLD_MASK[] = {
#if CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_1
BIT(0), //GPIO0
BIT(1), //GPIO1
BIT(2), //GPIO2
BIT(3), //GPIO3
BIT(4), //GPIO4
BIT(5), //GPIO5
BIT(6), //GPIO6
BIT(7), //GPIO7
BIT(8), //GPIO8
BIT(9), //GPIO9
BIT(10), //GPIO10
BIT(11), //GPIO11
BIT(12), //GPIO12
BIT(13), //GPIO13
BIT(14), //GPIO14
BIT(15), //GPIO15
BIT(16), //GPIO16
BIT(17), //GPIO17
BIT(18), //GPIO18
BIT(19), //GPIO19
BIT(20), //GPIO20
BIT(21), //GPIO21
BIT(22), //GPIO22
BIT(23), //GPIO23
BIT(24), //GPIO24
BIT(25), //GPIO25
BIT(26), //GPIO26
BIT(27), //GPIO27
BIT(28), //GPIO28
BIT(29), //GPIO29
BIT(30), //GPIO30
BIT(31), //GPIO31
BIT(0), //GPIO32
BIT(1), //GPIO33
BIT(2), //GPIO34
BIT(3), //GPIO35
BIT(4), //GPIO36
BIT(5), //GPIO37
BIT(6), //GPIO38
BIT(7), //GPIO39
BIT(8), //GPIO40
#elif CONFIG_IDF_TARGET_ESP32H4_BETA_VERSION_2
BIT(0), //GPIO0
BIT(1), //GPIO1
BIT(2), //GPIO2
BIT(3), //GPIO3
BIT(4), //GPIO4
BIT(5), //GPIO5
BIT(6), //GPIO6
BIT(0), //GPIO7
BIT(1), //GPIO8
BIT(2), //GPIO9
BIT(4), //GPIO10
BIT(3), //GPIO11
BIT(5), //GPIO12
BIT(13), //GPIO13
BIT(14), //GPIO14
BIT(15), //GPIO15
BIT(16), //GPIO16
BIT(17), //GPIO17
BIT(18), //GPIO18
BIT(19), //GPIO19
BIT(20), //GPIO20
BIT(21), //GPIO21
BIT(22), //GPIO22
BIT(23), //GPIO23
BIT(24), //GPIO24
BIT(25), //GPIO25
#endif
};
_Static_assert(sizeof(GPIO_HOLD_MASK) == SOC_GPIO_PIN_COUNT * sizeof(uint32_t), "Invalid size of GPIO_HOLD_MASK");

112
components/soc/esp32h4/i2c_bias.h
View File

@ -1,112 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#define I2C_BIAS 0x6a
#define I2C_BIAS_HOSTID 0
#define I2C_BIAS_DREG_1P6 0
#define I2C_BIAS_DREG_1P6_MSB 3
#define I2C_BIAS_DREG_1P6_LSB 0
#define I2C_BIAS_DREG_0P8 0
#define I2C_BIAS_DREG_0P8_MSB 7
#define I2C_BIAS_DREG_0P8_LSB 4
#define I2C_BIAS_DREG_1P1_PVT 1
#define I2C_BIAS_DREG_1P1_PVT_MSB 3
#define I2C_BIAS_DREG_1P1_PVT_LSB 0
#define I2C_BIAS_DREG_1P2 1
#define I2C_BIAS_DREG_1P2_MSB 7
#define I2C_BIAS_DREG_1P2_LSB 4
#define I2C_BIAS_ENT_CPREG 2
#define I2C_BIAS_ENT_CPREG_MSB 0
#define I2C_BIAS_ENT_CPREG_LSB 0
#define I2C_BIAS_ENT_CGM 2
#define I2C_BIAS_ENT_CGM_MSB 1
#define I2C_BIAS_ENT_CGM_LSB 1
#define I2C_BIAS_CGM_BIAS 2
#define I2C_BIAS_CGM_BIAS_MSB 3
#define I2C_BIAS_CGM_BIAS_LSB 2
#define I2C_BIAS_DREF_IGM 2
#define I2C_BIAS_DREF_IGM_MSB 4
#define I2C_BIAS_DREF_IGM_LSB 4
#define I2C_BIAS_RC_DVREF 2
#define I2C_BIAS_RC_DVREF_MSB 6
#define I2C_BIAS_RC_DVREF_LSB 5
#define I2C_BIAS_FORCE_DISABLE_BIAS_SLEEP 2
#define I2C_BIAS_FORCE_DISABLE_BIAS_SLEEP_MSB 7
#define I2C_BIAS_FORCE_DISABLE_BIAS_SLEEP_LSB 7
#define I2C_BIAS_RC_ENX 3
#define I2C_BIAS_RC_ENX_MSB 0
#define I2C_BIAS_RC_ENX_LSB 0
#define I2C_BIAS_RC_START 3
#define I2C_BIAS_RC_START_MSB 1
#define I2C_BIAS_RC_START_LSB 1
#define I2C_BIAS_RC_DCAP_EXT 3
#define I2C_BIAS_RC_DCAP_EXT_MSB 7
#define I2C_BIAS_RC_DCAP_EXT_LSB 2
#define I2C_BIAS_XPD_RC 4
#define I2C_BIAS_XPD_RC_MSB 0
#define I2C_BIAS_XPD_RC_LSB 0
#define I2C_BIAS_ENT_CONSTI 4
#define I2C_BIAS_ENT_CONSTI_MSB 1
#define I2C_BIAS_ENT_CONSTI_LSB 1
#define I2C_BIAS_XPD_ICX 4
#define I2C_BIAS_XPD_ICX_MSB 2
#define I2C_BIAS_XPD_ICX_LSB 2
#define I2C_BIAS_RC_RSTB 4
#define I2C_BIAS_RC_RSTB_MSB 3
#define I2C_BIAS_RC_RSTB_LSB 3
#define I2C_BIAS_RC_DIV 4
#define I2C_BIAS_RC_DIV_MSB 7
#define I2C_BIAS_RC_DIV_LSB 4
#define I2C_BIAS_RC_CAP 5
#define I2C_BIAS_RC_CAP_MSB 5
#define I2C_BIAS_RC_CAP_LSB 0
#define I2C_BIAS_RC_UD 5
#define I2C_BIAS_RC_UD_MSB 6
#define I2C_BIAS_RC_UD_LSB 6
#define I2C_BIAS_RC_LOCKB 5
#define I2C_BIAS_RC_LOCKB_MSB 7
#define I2C_BIAS_RC_LOCKB_LSB 7
#define I2C_BIAS_RC_CHG_COUNT 6
#define I2C_BIAS_RC_CHG_COUNT_MSB 4
#define I2C_BIAS_RC_CHG_COUNT_LSB 0
#define I2C_BIAS_XPD_CPREG 7
#define I2C_BIAS_XPD_CPREG_MSB 0
#define I2C_BIAS_XPD_CPREG_LSB 0
#define I2C_BIAS_XPD_CGM 7
#define I2C_BIAS_XPD_CGM_MSB 1
#define I2C_BIAS_XPD_CGM_LSB 1
#define I2C_BIAS_DTEST 7
#define I2C_BIAS_DTEST_MSB 3
#define I2C_BIAS_DTEST_LSB 2
#define I2C_BIAS_DRES12K 7
#define I2C_BIAS_DRES12K_MSB 7
#define I2C_BIAS_DRES12K_LSB 4

22
components/soc/esp32h4/i2c_periph.c
View File

@ -1,22 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/i2c_periph.h"
#include "soc/gpio_sig_map.h"
/*
Bunch of constants for every I2C peripheral: GPIO signals, irqs, hw addr of registers etc
*/
const i2c_signal_conn_t i2c_periph_signal[SOC_I2C_NUM] = {
{
.sda_out_sig = I2CEXT0_SDA_OUT_IDX,
.sda_in_sig = I2CEXT0_SDA_IN_IDX,
.scl_out_sig = I2CEXT0_SCL_OUT_IDX,
.scl_in_sig = I2CEXT0_SCL_IN_IDX,
.irq = ETS_I2C_EXT0_INTR_SOURCE,
.module = PERIPH_I2C0_MODULE,
},
};

280
components/soc/esp32h4/i2c_pmu.h
View File

@ -1,280 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#define I2C_PMU 0x6d
#define I2C_PMU_HOSTID 0
#define I2C_PMU_THRES_HIGH_7_0 0
#define I2C_PMU_THRES_HIGH_7_0_MSB 7
#define I2C_PMU_THRES_HIGH_7_0_LSB 0
#define I2C_PMU_THRES_LOW_7_0 1
#define I2C_PMU_THRES_LOW_7_0_MSB 7
#define I2C_PMU_THRES_LOW_7_0_LSB 0
#define I2C_PMU_THRES_HIGH_11_8 2
#define I2C_PMU_THRES_HIGH_11_8_MSB 3
#define I2C_PMU_THRES_HIGH_11_8_LSB 0
#define I2C_PMU_THRES_LOW_11_8 2
#define I2C_PMU_THRES_LOW_11_8_MSB 7
#define I2C_PMU_THRES_LOW_11_8_LSB 4
#define I2C_PMU_PVT_DELAY_INIT 3
#define I2C_PMU_PVT_DELAY_INIT_MSB 7
#define I2C_PMU_PVT_DELAY_INIT_LSB 0
#define I2C_PMU_PVT_DELAY_COUNT 4
#define I2C_PMU_PVT_DELAY_COUNT_MSB 5
#define I2C_PMU_PVT_DELAY_COUNT_LSB 0
#define I2C_PMU_OR_EN_CONT_CAL 4
#define I2C_PMU_OR_EN_CONT_CAL_MSB 7
#define I2C_PMU_OR_EN_CONT_CAL_LSB 7
#define I2C_PMU_I2C_RTC_DREG 5
#define I2C_PMU_I2C_RTC_DREG_MSB 4
#define I2C_PMU_I2C_RTC_DREG_LSB 0
#define I2C_PMU_I2C_DIG_DREG 6
#define I2C_PMU_I2C_DIG_DREG_MSB 4
#define I2C_PMU_I2C_DIG_DREG_LSB 0
#define I2C_PMU_I2C_RTC_DREG_SLP 7
#define I2C_PMU_I2C_RTC_DREG_SLP_MSB 3
#define I2C_PMU_I2C_RTC_DREG_SLP_LSB 0
#define I2C_PMU_I2C_DIG_DREG_SLP 7
#define I2C_PMU_I2C_DIG_DREG_SLP_MSB 7
#define I2C_PMU_I2C_DIG_DREG_SLP_LSB 4
#define I2C_PMU_EN_I2C_RTC_DREG 10
#define I2C_PMU_EN_I2C_RTC_DREG_MSB 0
#define I2C_PMU_EN_I2C_RTC_DREG_LSB 0
#define I2C_PMU_EN_I2C_DIG_DREG 10
#define I2C_PMU_EN_I2C_DIG_DREG_MSB 1
#define I2C_PMU_EN_I2C_DIG_DREG_LSB 1
#define I2C_PMU_EN_I2C_RTC_DREG_SLP 10
#define I2C_PMU_EN_I2C_RTC_DREG_SLP_MSB 2
#define I2C_PMU_EN_I2C_RTC_DREG_SLP_LSB 2
#define I2C_PMU_EN_I2C_DIG_DREG_SLP 10
#define I2C_PMU_EN_I2C_DIG_DREG_SLP_MSB 3
#define I2C_PMU_EN_I2C_DIG_DREG_SLP_LSB 3
#define I2C_PMU_ENX_RTC_DREG 11
#define I2C_PMU_ENX_RTC_DREG_MSB 0
#define I2C_PMU_ENX_RTC_DREG_LSB 0
#define I2C_PMU_ENX_DIG_DREG 11
#define I2C_PMU_ENX_DIG_DREG_MSB 1
#define I2C_PMU_ENX_DIG_DREG_LSB 1
#define I2C_PMU_OR_XPD_RTC_SLAVE_3P3 11
#define I2C_PMU_OR_XPD_RTC_SLAVE_3P3_MSB 2
#define I2C_PMU_OR_XPD_RTC_SLAVE_3P3_LSB 2
#define I2C_PMU_OR_XPD_RTC_REG 11
#define I2C_PMU_OR_XPD_RTC_REG_MSB 4
#define I2C_PMU_OR_XPD_RTC_REG_LSB 4
#define I2C_PMU_OR_XPD_DIG_REG 11
#define I2C_PMU_OR_XPD_DIG_REG_MSB 5
#define I2C_PMU_OR_XPD_DIG_REG_LSB 5
#define I2C_PMU_OR_PD_RTC_REG_SLP 11
#define I2C_PMU_OR_PD_RTC_REG_SLP_MSB 6
#define I2C_PMU_OR_PD_RTC_REG_SLP_LSB 6
#define I2C_PMU_OR_PD_DIG_REG_SLP 11
#define I2C_PMU_OR_PD_DIG_REG_SLP_MSB 7
#define I2C_PMU_OR_PD_DIG_REG_SLP_LSB 7
#define I2C_PMU_INT_DREG 12
#define I2C_PMU_INT_DREG_MSB 4
#define I2C_PMU_INT_DREG_LSB 0
#define I2C_PMU_O_UDF 12
#define I2C_PMU_O_UDF_MSB 5
#define I2C_PMU_O_UDF_LSB 5
#define I2C_PMU_O_OVF 12
#define I2C_PMU_O_OVF_MSB 6
#define I2C_PMU_O_OVF_LSB 6
#define I2C_PMU_O_UPDATE 12
#define I2C_PMU_O_UPDATE_MSB 7
#define I2C_PMU_O_UPDATE_LSB 7
#define I2C_PMU_PVT_COUNT_7_0 13
#define I2C_PMU_PVT_COUNT_7_0_MSB 7
#define I2C_PMU_PVT_COUNT_7_0_LSB 0
#define I2C_PMU_PVT_COUNT_11_8 14
#define I2C_PMU_PVT_COUNT_11_8_MSB 3
#define I2C_PMU_PVT_COUNT_11_8_LSB 0
#define I2C_PMU_IC_VGOOD_LVDET 14
#define I2C_PMU_IC_VGOOD_LVDET_MSB 4
#define I2C_PMU_IC_VGOOD_LVDET_LSB 4
#define I2C_PMU_IC_POWER_GOOD_DCDC 14
#define I2C_PMU_IC_POWER_GOOD_DCDC_MSB 5
#define I2C_PMU_IC_POWER_GOOD_DCDC_LSB 5
#define I2C_PMU_IC_VGOOD_DIGDET 14
#define I2C_PMU_IC_VGOOD_DIGDET_MSB 6
#define I2C_PMU_IC_VGOOD_DIGDET_LSB 6
#define I2C_PMU_OR_XPD_DCDC 15
#define I2C_PMU_OR_XPD_DCDC_MSB 0
#define I2C_PMU_OR_XPD_DCDC_LSB 0
#define I2C_PMU_OR_DISALBE_DEEP_SLEEP_DCDC 15
#define I2C_PMU_OR_DISALBE_DEEP_SLEEP_DCDC_MSB 1
#define I2C_PMU_OR_DISALBE_DEEP_SLEEP_DCDC_LSB 1
#define I2C_PMU_OR_DISALBE_LIGHT_SLEEP_DCDC 15
#define I2C_PMU_OR_DISALBE_LIGHT_SLEEP_DCDC_MSB 2
#define I2C_PMU_OR_DISALBE_LIGHT_SLEEP_DCDC_LSB 2
#define I2C_PMU_OR_ENALBE_TRX_MODE_DCDC 15
#define I2C_PMU_OR_ENALBE_TRX_MODE_DCDC_MSB 3
#define I2C_PMU_OR_ENALBE_TRX_MODE_DCDC_LSB 3
#define I2C_PMU_OR_ENX_REG_DCDC 15
#define I2C_PMU_OR_ENX_REG_DCDC_MSB 4
#define I2C_PMU_OR_ENX_REG_DCDC_LSB 4
#define I2C_PMU_OR_UNLOCK_DCDC 15
#define I2C_PMU_OR_UNLOCK_DCDC_MSB 5
#define I2C_PMU_OR_UNLOCK_DCDC_LSB 5
#define I2C_PMU_OR_FORCE_LOCK_DCDC 15
#define I2C_PMU_OR_FORCE_LOCK_DCDC_MSB 6
#define I2C_PMU_OR_FORCE_LOCK_DCDC_LSB 6
#define I2C_PMU_OR_ENB_SLOW_CLK 15
#define I2C_PMU_OR_ENB_SLOW_CLK_MSB 7
#define I2C_PMU_OR_ENB_SLOW_CLK_LSB 7
#define I2C_PMU_OC_SCK_DCAP 16
#define I2C_PMU_OC_SCK_DCAP_MSB 7
#define I2C_PMU_OC_SCK_DCAP_LSB 0
#define I2C_PMU_OC_XPD_LVDET 17
#define I2C_PMU_OC_XPD_LVDET_MSB 0
#define I2C_PMU_OC_XPD_LVDET_LSB 0
#define I2C_PMU_OC_MODE_LVDET 17
#define I2C_PMU_OC_MODE_LVDET_MSB 1
#define I2C_PMU_OC_MODE_LVDET_LSB 1
#define I2C_PMU_OR_XPD_TRX 17
#define I2C_PMU_OR_XPD_TRX_MSB 2
#define I2C_PMU_OR_XPD_TRX_LSB 2
#define I2C_PMU_OR_EN_RESET_CHIP 17
#define I2C_PMU_OR_EN_RESET_CHIP_MSB 3
#define I2C_PMU_OR_EN_RESET_CHIP_LSB 3
#define I2C_PMU_OC_DREF_LVDET 17
#define I2C_PMU_OC_DREF_LVDET_MSB 6
#define I2C_PMU_OC_DREF_LVDET_LSB 4
#define I2C_PMU_OR_FORCE_XPD_REG_SLAVE 17
#define I2C_PMU_OR_FORCE_XPD_REG_SLAVE_MSB 7
#define I2C_PMU_OR_FORCE_XPD_REG_SLAVE_LSB 7
#define I2C_PMU_DTEST 18
#define I2C_PMU_DTEST_MSB 1
#define I2C_PMU_DTEST_LSB 0
#define I2C_PMU_ENT_BIAS 18
#define I2C_PMU_ENT_BIAS_MSB 2
#define I2C_PMU_ENT_BIAS_LSB 2
#define I2C_PMU_ENT_VDD 18
#define I2C_PMU_ENT_VDD_MSB 5
#define I2C_PMU_ENT_VDD_LSB 3
#define I2C_PMU_EN_DMUX 18
#define I2C_PMU_EN_DMUX_MSB 6
#define I2C_PMU_EN_DMUX_LSB 6
#define I2C_PMU_WD_DISABLE 18
#define I2C_PMU_WD_DISABLE_MSB 7
#define I2C_PMU_WD_DISABLE_LSB 7
#define I2C_PMU_DTEST_DCDC 19
#define I2C_PMU_DTEST_DCDC_MSB 0
#define I2C_PMU_DTEST_DCDC_LSB 0
#define I2C_PMU_TESTEN_DCDC 19
#define I2C_PMU_TESTEN_DCDC_MSB 1
#define I2C_PMU_TESTEN_DCDC_LSB 1
#define I2C_PMU_ADD_DCDC 19
#define I2C_PMU_ADD_DCDC_MSB 6
#define I2C_PMU_ADD_DCDC_LSB 4
#define I2C_PMU_OR_POCPENB_DCDC 20
#define I2C_PMU_OR_POCPENB_DCDC_MSB 0
#define I2C_PMU_OR_POCPENB_DCDC_LSB 0
#define I2C_PMU_OR_SSTIME_DCDC 20
#define I2C_PMU_OR_SSTIME_DCDC_MSB 1
#define I2C_PMU_OR_SSTIME_DCDC_LSB 1
#define I2C_PMU_OR_CCM_DCDC 20
#define I2C_PMU_OR_CCM_DCDC_MSB 2
#define I2C_PMU_OR_CCM_DCDC_LSB 2
#define I2C_PMU_OR_VSET_LOW_DCDC 20
#define I2C_PMU_OR_VSET_LOW_DCDC_MSB 7
#define I2C_PMU_OR_VSET_LOW_DCDC_LSB 3
#define I2C_PMU_OR_FSW_DCDC 21
#define I2C_PMU_OR_FSW_DCDC_MSB 2
#define I2C_PMU_OR_FSW_DCDC_LSB 0
#define I2C_PMU_OR_DCMLEVEL_DCDC 21
#define I2C_PMU_OR_DCMLEVEL_DCDC_MSB 4
#define I2C_PMU_OR_DCMLEVEL_DCDC_LSB 3
#define I2C_PMU_OR_DCM2ENB_DCDC 21
#define I2C_PMU_OR_DCM2ENB_DCDC_MSB 5
#define I2C_PMU_OR_DCM2ENB_DCDC_LSB 5
#define I2C_PMU_OR_RAMP_DCDC 21
#define I2C_PMU_OR_RAMP_DCDC_MSB 6
#define I2C_PMU_OR_RAMP_DCDC_LSB 6
#define I2C_PMU_OR_RAMPLEVEL_DCDC 21
#define I2C_PMU_OR_RAMPLEVEL_DCDC_MSB 7
#define I2C_PMU_OR_RAMPLEVEL_DCDC_LSB 7
#define I2C_PMU_OR_VSET_HIGH_DCDC 22
#define I2C_PMU_OR_VSET_HIGH_DCDC_MSB 4
#define I2C_PMU_OR_VSET_HIGH_DCDC_LSB 0
#define I2C_PMU_OC_DEL_SSEND 22
#define I2C_PMU_OC_DEL_SSEND_MSB 7
#define I2C_PMU_OC_DEL_SSEND_LSB 5
#define I2C_PMU_OC_XPD_DIGDET 23
#define I2C_PMU_OC_XPD_DIGDET_MSB 0
#define I2C_PMU_OC_XPD_DIGDET_LSB 0
#define I2C_PMU_OC_MODE_DIGDET 23
#define I2C_PMU_OC_MODE_DIGDET_MSB 1
#define I2C_PMU_OC_MODE_DIGDET_LSB 1
#define I2C_PMU_OC_DREF_DIGDET 23
#define I2C_PMU_OC_DREF_DIGDET_MSB 6
#define I2C_PMU_OC_DREF_DIGDET_LSB 4

108
components/soc/esp32h4/i2c_ulp.h
View File

@ -1,108 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#define I2C_ULP 0x61
#define I2C_ULP_HOSTID 0
#define I2C_ULP_IR_RESETB 0
#define I2C_ULP_IR_RESETB_MSB 0
#define I2C_ULP_IR_RESETB_LSB 0
#define I2C_ULP_XPD_REG_SLP 0
#define I2C_ULP_XPD_REG_SLP_MSB 1
#define I2C_ULP_XPD_REG_SLP_LSB 1
#define I2C_ULP_DBIAS_SLP 0
#define I2C_ULP_DBIAS_SLP_MSB 7
#define I2C_ULP_DBIAS_SLP_LSB 4
#define I2C_ULP_IR_FORCE_XPD_BIAS_BUF 1
#define I2C_ULP_IR_FORCE_XPD_BIAS_BUF_MSB 1
#define I2C_ULP_IR_FORCE_XPD_BIAS_BUF_LSB 1
#define I2C_ULP_IR_FORCE_XPD_IPH 1
#define I2C_ULP_IR_FORCE_XPD_IPH_MSB 2
#define I2C_ULP_IR_FORCE_XPD_IPH_LSB 2
#define I2C_ULP_IR_FORCE_XPD_VGATE_BUF 1
#define I2C_ULP_IR_FORCE_XPD_VGATE_BUF_MSB 3
#define I2C_ULP_IR_FORCE_XPD_VGATE_BUF_LSB 3
#define I2C_ULP_IR_FORCE_DISABLE_BIAS_SLEEP 1
#define I2C_ULP_IR_FORCE_DISABLE_BIAS_SLEEP_MSB 4
#define I2C_ULP_IR_FORCE_DISABLE_BIAS_SLEEP_LSB 4
#define I2C_ULP_IR_ZOS_XPD 2
#define I2C_ULP_IR_ZOS_XPD_MSB 0
#define I2C_ULP_IR_ZOS_XPD_LSB 0
#define I2C_ULP_IR_ZOS_RSTB 2
#define I2C_ULP_IR_ZOS_RSTB_MSB 1
#define I2C_ULP_IR_ZOS_RSTB_LSB 1
#define I2C_ULP_IR_ZOS_RESTART 2
#define I2C_ULP_IR_ZOS_RESTART_MSB 2
#define I2C_ULP_IR_ZOS_RESTART_LSB 2
#define I2C_ULP_DTEST 3
#define I2C_ULP_DTEST_MSB 1
#define I2C_ULP_DTEST_LSB 0
#define I2C_ULP_ENT_BG 3
#define I2C_ULP_ENT_BG_MSB 2
#define I2C_ULP_ENT_BG_LSB 2
#define I2C_ULP_MODE_LVDET 3
#define I2C_ULP_MODE_LVDET_MSB 3
#define I2C_ULP_MODE_LVDET_LSB 3
#define I2C_ULP_DREF_LVDET 3
#define I2C_ULP_DREF_LVDET_MSB 6
#define I2C_ULP_DREF_LVDET_LSB 4
#define I2C_ULP_XPD_LVDET 3
#define I2C_ULP_XPD_LVDET_MSB 7
#define I2C_ULP_XPD_LVDET_LSB 7
#define I2C_ULP_INT_XPD_XTAL_CK_DIG_REG 4
#define I2C_ULP_INT_XPD_XTAL_CK_DIG_REG_MSB 0
#define I2C_ULP_INT_XPD_XTAL_CK_DIG_REG_LSB 0
#define I2C_ULP_INT_XPD_XTAL_BUF 4
#define I2C_ULP_INT_XPD_XTAL_BUF_MSB 1
#define I2C_ULP_INT_XPD_XTAL_BUF_LSB 1
#define I2C_ULP_INT_XPD_RC_CK 4
#define I2C_ULP_INT_XPD_RC_CK_MSB 2
#define I2C_ULP_INT_XPD_RC_CK_LSB 2
#define I2C_ULP_XTAL_DPHASE 4
#define I2C_ULP_XTAL_DPHASE_MSB 3
#define I2C_ULP_XTAL_DPHASE_LSB 3
#define I2C_ULP_INT_XPD_XTAL_LIN_REG 4
#define I2C_ULP_INT_XPD_XTAL_LIN_REG_MSB 4
#define I2C_ULP_INT_XPD_XTAL_LIN_REG_LSB 4
#define I2C_ULP_XTAL_RESTART_DC_CAL 4
#define I2C_ULP_XTAL_RESTART_DC_CAL_MSB 5
#define I2C_ULP_XTAL_RESTART_DC_CAL_LSB 5
#define I2C_ULP_XTAL_DAC 5
#define I2C_ULP_XTAL_DAC_MSB 3
#define I2C_ULP_XTAL_DAC_LSB 0
#define I2C_ULP_XTAL_DBLEED 6
#define I2C_ULP_XTAL_DBLEED_MSB 4
#define I2C_ULP_XTAL_DBLEED_LSB 0
#define I2C_ULP_XTAL_CAL_DONE 6
#define I2C_ULP_XTAL_CAL_DONE_MSB 5
#define I2C_ULP_XTAL_CAL_DONE_LSB 5
#define I2C_ULP_ZOS_DONE 6
#define I2C_ULP_ZOS_DONE_MSB 6
#define I2C_ULP_ZOS_DONE_LSB 6

34
components/soc/esp32h4/i2s_periph.c
View File

@ -1,34 +0,0 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "soc/i2s_periph.h"
#include "soc/gpio_sig_map.h"
/*
Bunch of constants for every I2S peripheral: GPIO signals, irqs, hw addr of registers etc
*/
const i2s_signal_conn_t i2s_periph_signal[SOC_I2S_NUM] = {
{
.mck_out_sig = I2S_MCLK_OUT_IDX,
.m_tx_bck_sig = I2SO_BCK_OUT_IDX,
.m_rx_bck_sig = I2SI_BCK_OUT_IDX,
.m_tx_ws_sig = I2SO_WS_OUT_IDX,
.m_rx_ws_sig = I2SI_WS_OUT_IDX,
.s_tx_bck_sig = I2SO_BCK_IN_IDX,
.s_rx_bck_sig = I2SI_BCK_IN_IDX,
.s_tx_ws_sig = I2SO_WS_IN_IDX,
.s_rx_ws_sig = I2SI_WS_IN_IDX,
.data_out_sigs[0] = I2SO_SD_OUT_IDX,
.data_out_sigs[1] = I2SO_SD1_OUT_IDX,
.data_in_sig = I2SI_SD_IN_IDX,
.irq = ETS_I2S1_INTR_SOURCE,
.module = PERIPH_I2S1_MODULE,
}
};

683
components/soc/esp32h4/include/rev1/soc/assist_debug_reg.h
View File

@ -1,683 +0,0 @@
/*
* SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef _SOC_ASSIST_DEBUG_REG_H_
#define _SOC_ASSIST_DEBUG_REG_H_
#include "soc/soc.h"
#ifdef __cplusplus
extern "C" {
#endif
#define ASSIST_DEBUG_CORE_0_INTR_ENA_REG (DR_REG_ASSIST_DEBUG_BASE + 0x000)
/* ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_ENA : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_ENA (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_ENA_M (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_ENA_S 11
/* ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_ENA : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_ENA (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_ENA_M (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_ENA_S 10
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_ENA : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_ENA (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_ENA_M (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_ENA_S 9
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_ENA (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_ENA_M (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_ENA_S 8
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_ENA (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_ENA_M (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_ENA_S 7
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_ENA (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_ENA_M (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_ENA_S 6
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_ENA (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_ENA_M (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_ENA_S 5
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_ENA (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_ENA_M (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_ENA_S 4
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_ENA (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_ENA_M (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_ENA_S 3
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_ENA (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_ENA_M (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_ENA_S 2
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_ENA (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_ENA_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_ENA_S 1
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_ENA (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_ENA_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_ENA_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_ENA_S 0
#define ASSIST_DEBUG_CORE_0_INTR_RAW_REG (DR_REG_ASSIST_DEBUG_BASE + 0x004)
/* ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RAW : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RAW (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RAW_M (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RAW_S 11
/* ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RAW : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RAW (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RAW_M (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RAW_S 10
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RAW : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RAW (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RAW_M (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RAW_S 9
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RAW (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RAW_M (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RAW_S 8
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RAW (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RAW_M (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RAW_S 7
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RAW (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RAW_M (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RAW_S 6
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RAW (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RAW_M (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RAW_S 5
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RAW (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RAW_M (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RAW_S 4
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RAW (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RAW_M (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RAW_S 3
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RAW (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RAW_M (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RAW_S 2
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RAW (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RAW_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RAW_S 1
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RAW (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RAW_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RAW_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RAW_S 0
#define ASSIST_DEBUG_CORE_0_INTR_RLS_REG (DR_REG_ASSIST_DEBUG_BASE + 0x008)
/* ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RLS : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RLS (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RLS_M (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_RLS_S 11
/* ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RLS : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RLS (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RLS_M (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_RLS_S 10
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RLS : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RLS (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RLS_M (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_RLS_S 9
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RLS : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RLS (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RLS_M (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_RLS_S 8
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RLS : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RLS (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RLS_M (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_RLS_S 7
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RLS : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RLS (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RLS_M (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_RLS_S 6
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RLS : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RLS (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RLS_M (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_RLS_S 5
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RLS : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RLS (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RLS_M (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_RLS_S 4
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RLS : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RLS (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RLS_M (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_RLS_S 3
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RLS : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RLS (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RLS_M (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_RLS_S 2
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RLS : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RLS (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RLS_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_RLS_S 1
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RLS : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RLS (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RLS_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RLS_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_RLS_S 0
#define ASSIST_DEBUG_CORE_0_INTR_CLR_REG (DR_REG_ASSIST_DEBUG_BASE + 0x00C)
/* ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_CLR : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_CLR (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_CLR_M (BIT(11))
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_CLR_S 11
/* ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_CLR : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_CLR (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_CLR_M (BIT(10))
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_CLR_S 10
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_CLR : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_CLR (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_CLR_M (BIT(9))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MAX_CLR_S 9
/* ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_CLR : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_CLR (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_CLR_M (BIT(8))
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_SP_SPILL_MIN_CLR_S 8
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_CLR : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_CLR (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_CLR_M (BIT(7))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_WR_CLR_S 7
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_CLR (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_CLR_M (BIT(6))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_RD_CLR_S 6
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_CLR : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_CLR (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_CLR_M (BIT(5))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_WR_CLR_S 5
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_CLR : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_CLR (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_CLR_M (BIT(4))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_RD_CLR_S 4
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_CLR : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_CLR (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_CLR_M (BIT(3))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_WR_CLR_S 3
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_CLR : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_CLR (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_CLR_M (BIT(2))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_RD_CLR_S 2
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_CLR : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_CLR (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_CLR_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_WR_CLR_S 1
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_CLR : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_CLR (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_CLR_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_CLR_V 0x1
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_RD_CLR_S 0
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x010)
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN : R/W ;bitpos:[31:0] ;default: ~32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_M ((ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_V)<<(ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_S))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MIN_S 0
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x014)
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_M ((ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_V)<<(ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_S))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_0_MAX_S 0
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x018)
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN : R/W ;bitpos:[31:0] ;default: ~32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_M ((ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_V)<<(ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_S))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MIN_S 0
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x01C)
/* ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_M ((ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_V)<<(ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_S))
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_DRAM0_1_MAX_S 0
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x020)
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN : R/W ;bitpos:[31:0] ;default: ~32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_M ((ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_V)<<(ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_S))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MIN_S 0
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x024)
/* ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_M ((ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_V)<<(ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_S))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_0_MAX_S 0
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x028)
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN : R/W ;bitpos:[31:0] ;default: ~32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_M ((ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_V)<<(ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_S))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MIN_S 0
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x02C)
/* ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_M ((ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_V)<<(ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_S))
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PIF_1_MAX_S 0
#define ASSIST_DEBUG_CORE_0_AREA_PC_REG (DR_REG_ASSIST_DEBUG_BASE + 0x030)
/* ASSIST_DEBUG_CORE_0_AREA_PC : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_PC 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PC_M ((ASSIST_DEBUG_CORE_0_AREA_PC_V)<<(ASSIST_DEBUG_CORE_0_AREA_PC_S))
#define ASSIST_DEBUG_CORE_0_AREA_PC_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_PC_S 0
#define ASSIST_DEBUG_CORE_0_AREA_SP_REG (DR_REG_ASSIST_DEBUG_BASE + 0x034)
/* ASSIST_DEBUG_CORE_0_AREA_SP : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_AREA_SP 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_SP_M ((ASSIST_DEBUG_CORE_0_AREA_SP_V)<<(ASSIST_DEBUG_CORE_0_AREA_SP_S))
#define ASSIST_DEBUG_CORE_0_AREA_SP_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_AREA_SP_S 0
#define ASSIST_DEBUG_CORE_0_SP_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x038)
/* ASSIST_DEBUG_CORE_0_SP_MIN : RW ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_MIN_M ((ASSIST_DEBUG_CORE_0_SP_MIN_V)<<(ASSIST_DEBUG_CORE_0_SP_MIN_S))
#define ASSIST_DEBUG_CORE_0_SP_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_MIN_S 0
#define ASSIST_DEBUG_CORE_0_SP_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x03C)
/* ASSIST_DEBUG_CORE_0_SP_MAX : RW ;bitpos:[31:0] ;default: ~32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_MAX_M ((ASSIST_DEBUG_CORE_0_SP_MAX_V)<<(ASSIST_DEBUG_CORE_0_SP_MAX_S))
#define ASSIST_DEBUG_CORE_0_SP_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_MAX_S 0
#define ASSIST_DEBUG_CORE_0_SP_PC_REG (DR_REG_ASSIST_DEBUG_BASE + 0x040)
/* ASSIST_DEBUG_CORE_0_SP_PC : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_SP_PC 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_PC_M ((ASSIST_DEBUG_CORE_0_SP_PC_V)<<(ASSIST_DEBUG_CORE_0_SP_PC_S))
#define ASSIST_DEBUG_CORE_0_SP_PC_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_SP_PC_S 0
#define ASSIST_DEBUG_CORE_0_RCD_EN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x044)
/* ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN : RW ;bitpos:[1] ;default: 1'b0 ; */
/*description: enable CPU Pdebug function if enable CPU will update PdebugPC*/
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN (BIT(1))
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN_V 0x1
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGEN_S 1
/* ASSIST_DEBUG_CORE_0_RCD_RECORDEN : RW ;bitpos:[0] ;default: 1'b0 ; */
/*description: enable recording function if enable assist_debug will update
PdebugPC so you can read it*/
#define ASSIST_DEBUG_CORE_0_RCD_RECORDEN (BIT(0))
#define ASSIST_DEBUG_CORE_0_RCD_RECORDEN_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_RCD_RECORDEN_V 0x1
#define ASSIST_DEBUG_CORE_0_RCD_RECORDEN_S 0
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_REG (DR_REG_ASSIST_DEBUG_BASE + 0x048)
/* ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_M ((ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_V)<<(ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_S))
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGPC_S 0
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_REG (DR_REG_ASSIST_DEBUG_BASE + 0x04C)
/* ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_M ((ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_V)<<(ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_S))
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_RCD_PDEBUGSP_S 0
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_0_REG (DR_REG_ASSIST_DEBUG_BASE + 0x050)
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_0 : RO ;bitpos:[25] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_0 (BIT(25))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_0_M (BIT(25))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_0_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_0_S 25
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_0 : RO ;bitpos:[24] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_0 (BIT(24))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_0_M (BIT(24))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_0_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_0_S 24
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0 : RO ;bitpos:[23:0] ;default: 24'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0 0x00FFFFFF
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0_M ((ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0_V)<<(ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0_S))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0_V 0xFFFFFF
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_0_S 0
#define ASSIST_DEBUG_CORE_0_IRAM0_EXCEPTION_MONITOR_1_REG (DR_REG_ASSIST_DEBUG_BASE + 0x054)
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_1 : RO ;bitpos:[25] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_1 (BIT(25))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_1_M (BIT(25))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_1_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_LOADSTORE_1_S 25
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_1 : RO ;bitpos:[24] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_1 (BIT(24))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_1_M (BIT(24))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_1_V 0x1
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_WR_1_S 24
/* ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1 : RO ;bitpos:[23:0] ;default: 24'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1 0x00FFFFFF
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1_M ((ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1_V)<<(ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1_S))
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1_V 0xFFFFFF
#define ASSIST_DEBUG_CORE_0_IRAM0_RECORDING_ADDR_1_S 0
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_0_REG (DR_REG_ASSIST_DEBUG_BASE + 0x058)
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0 : RO ;bitpos:[28:25] ;default: 4'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0 0x0000000F
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0_V 0xF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_0_S 25
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_0 : RO ;bitpos:[24] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_0 (BIT(24))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_0_M (BIT(24))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_0_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_0_S 24
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0 : RO ;bitpos:[23:0] ;default: 24'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0 0x00FFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0_V 0xFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_0_S 0
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_1_REG (DR_REG_ASSIST_DEBUG_BASE + 0x05C)
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_0_S 0
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_2_REG (DR_REG_ASSIST_DEBUG_BASE + 0x060)
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1 : RO ;bitpos:[28:25] ;default: 4'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1 0x0000000F
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1_V 0xF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_BYTEEN_1_S 25
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_1 : RO ;bitpos:[24] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_1 (BIT(24))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_1_M (BIT(24))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_1_V 0x1
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_WR_1_S 24
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1 : RO ;bitpos:[23:0] ;default: 24'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1 0x00FFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1_V 0xFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_ADDR_1_S 0
#define ASSIST_DEBUG_CORE_0_DRAM0_EXCEPTION_MONITOR_3_REG (DR_REG_ASSIST_DEBUG_BASE + 0x064)
/* ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1 : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1_M ((ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1_V)<<(ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1_S))
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_DRAM0_RECORDING_PC_1_S 0
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_EXCEPTION_MONITOR_0_REG (DR_REG_ASSIST_DEBUG_BASE + 0x068)
/* ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0 : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0 0x000FFFFF
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0_M ((ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0_V)<<(ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0_S))
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0_V 0xFFFFF
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_0_S 0
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_EXCEPTION_MONITOR_1_REG (DR_REG_ASSIST_DEBUG_BASE + 0x06C)
/* ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1 : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1 0x000FFFFF
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1_M ((ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1_V)<<(ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1_S))
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1_V 0xFFFFF
#define ASSIST_DEBUG_CORE_X_IRAM0_DRAM0_LIMIT_CYCLE_1_S 0
#define ASSIST_DEBUG_LOG_SETTING_REG (DR_REG_ASSIST_DEBUG_BASE + 0x070)
/* ASSIST_DEBUG_LOG_MEM_LOOP_ENABLE : R/W ;bitpos:[7] ;default: 1'b1 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MEM_LOOP_ENABLE (BIT(7))
#define ASSIST_DEBUG_LOG_MEM_LOOP_ENABLE_M (BIT(7))
#define ASSIST_DEBUG_LOG_MEM_LOOP_ENABLE_V 0x1
#define ASSIST_DEBUG_LOG_MEM_LOOP_ENABLE_S 7
/* ASSIST_DEBUG_LOG_MODE : R/W ;bitpos:[6:3] ;default: 4'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MODE 0x0000000F
#define ASSIST_DEBUG_LOG_MODE_M ((ASSIST_DEBUG_LOG_MODE_V)<<(ASSIST_DEBUG_LOG_MODE_S))
#define ASSIST_DEBUG_LOG_MODE_V 0xF
#define ASSIST_DEBUG_LOG_MODE_S 3
/* ASSIST_DEBUG_LOG_ENA : R/W ;bitpos:[2:0] ;default: 3'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_ENA 0x00000007
#define ASSIST_DEBUG_LOG_ENA_M ((ASSIST_DEBUG_LOG_ENA_V)<<(ASSIST_DEBUG_LOG_ENA_S))
#define ASSIST_DEBUG_LOG_ENA_V 0x7
#define ASSIST_DEBUG_LOG_ENA_S 0
#define ASSIST_DEBUG_LOG_DATA_0_REG (DR_REG_ASSIST_DEBUG_BASE + 0x074)
/* ASSIST_DEBUG_LOG_DATA_0 : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_DATA_0 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_DATA_0_M ((ASSIST_DEBUG_LOG_DATA_0_V)<<(ASSIST_DEBUG_LOG_DATA_0_S))
#define ASSIST_DEBUG_LOG_DATA_0_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_DATA_0_S 0
#define ASSIST_DEBUG_LOG_DATA_MASK_REG (DR_REG_ASSIST_DEBUG_BASE + 0x078)
/* ASSIST_DEBUG_LOG_DATA_SIZE : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_DATA_SIZE 0x0000FFFF
#define ASSIST_DEBUG_LOG_DATA_SIZE_M ((ASSIST_DEBUG_LOG_DATA_SIZE_V)<<(ASSIST_DEBUG_LOG_DATA_SIZE_S))
#define ASSIST_DEBUG_LOG_DATA_SIZE_V 0xFFFF
#define ASSIST_DEBUG_LOG_DATA_SIZE_S 0
#define ASSIST_DEBUG_LOG_MIN_REG (DR_REG_ASSIST_DEBUG_BASE + 0x07C)
/* ASSIST_DEBUG_LOG_MIN : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MIN 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MIN_M ((ASSIST_DEBUG_LOG_MIN_V)<<(ASSIST_DEBUG_LOG_MIN_S))
#define ASSIST_DEBUG_LOG_MIN_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MIN_S 0
#define ASSIST_DEBUG_LOG_MAX_REG (DR_REG_ASSIST_DEBUG_BASE + 0x080)
/* ASSIST_DEBUG_LOG_MAX : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MAX 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MAX_M ((ASSIST_DEBUG_LOG_MAX_V)<<(ASSIST_DEBUG_LOG_MAX_S))
#define ASSIST_DEBUG_LOG_MAX_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MAX_S 0
#define ASSIST_DEBUG_LOG_MEM_START_REG (DR_REG_ASSIST_DEBUG_BASE + 0x084)
/* ASSIST_DEBUG_LOG_MEM_START : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MEM_START 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_START_M ((ASSIST_DEBUG_LOG_MEM_START_V)<<(ASSIST_DEBUG_LOG_MEM_START_S))
#define ASSIST_DEBUG_LOG_MEM_START_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_START_S 0
#define ASSIST_DEBUG_LOG_MEM_END_REG (DR_REG_ASSIST_DEBUG_BASE + 0x088)
/* ASSIST_DEBUG_LOG_MEM_END : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MEM_END 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_END_M ((ASSIST_DEBUG_LOG_MEM_END_V)<<(ASSIST_DEBUG_LOG_MEM_END_S))
#define ASSIST_DEBUG_LOG_MEM_END_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_END_S 0
#define ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_REG (DR_REG_ASSIST_DEBUG_BASE + 0x08C)
/* ASSIST_DEBUG_LOG_MEM_WRITING_ADDR : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MEM_WRITING_ADDR 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_M ((ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_V)<<(ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_S))
#define ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_V 0xFFFFFFFF
#define ASSIST_DEBUG_LOG_MEM_WRITING_ADDR_S 0
#define ASSIST_DEBUG_LOG_MEM_FULL_FLAG_REG (DR_REG_ASSIST_DEBUG_BASE + 0x090)
/* ASSIST_DEBUG_CLR_LOG_MEM_FULL_FLAG : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CLR_LOG_MEM_FULL_FLAG (BIT(1))
#define ASSIST_DEBUG_CLR_LOG_MEM_FULL_FLAG_M (BIT(1))
#define ASSIST_DEBUG_CLR_LOG_MEM_FULL_FLAG_V 0x1
#define ASSIST_DEBUG_CLR_LOG_MEM_FULL_FLAG_S 1
/* ASSIST_DEBUG_LOG_MEM_FULL_FLAG : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_LOG_MEM_FULL_FLAG (BIT(0))
#define ASSIST_DEBUG_LOG_MEM_FULL_FLAG_M (BIT(0))
#define ASSIST_DEBUG_LOG_MEM_FULL_FLAG_V 0x1
#define ASSIST_DEBUG_LOG_MEM_FULL_FLAG_S 0
#define ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXCEPTION_REG (DR_REG_ASSIST_DEBUG_BASE + 0x094)
/* ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC : RO ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC_M ((ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC_V)<<(ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC_S))
#define ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC_V 0xFFFFFFFF
#define ASSIST_DEBUG_CORE_0_LASTPC_BEFORE_EXC_S 0
#define ASSIST_DEBUG_CORE_0_DEBUG_MODE_REG (DR_REG_ASSIST_DEBUG_BASE + 0x098)
/* ASSIST_DEBUG_CORE_0_DEBUG_MODULE_ACTIVE : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DEBUG_MODULE_ACTIVE (BIT(1))
#define ASSIST_DEBUG_CORE_0_DEBUG_MODULE_ACTIVE_M (BIT(1))
#define ASSIST_DEBUG_CORE_0_DEBUG_MODULE_ACTIVE_V 0x1
#define ASSIST_DEBUG_CORE_0_DEBUG_MODULE_ACTIVE_S 1
/* ASSIST_DEBUG_CORE_0_DEBUG_MODE : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: */
#define ASSIST_DEBUG_CORE_0_DEBUG_MODE (BIT(0))
#define ASSIST_DEBUG_CORE_0_DEBUG_MODE_M (BIT(0))
#define ASSIST_DEBUG_CORE_0_DEBUG_MODE_V 0x1
#define ASSIST_DEBUG_CORE_0_DEBUG_MODE_S 0
#define ASSIST_DEBUG_DATE_REG (DR_REG_ASSIST_DEBUG_BASE + 0x1FC)
/* ASSIST_DEBUG_DATE : R/W ;bitpos:[27:0] ;default: 28'h2008010 ; */
/*description: */
#define ASSIST_DEBUG_DATE 0x0FFFFFFF
#define ASSIST_DEBUG_DATE_M ((ASSIST_DEBUG_DATE_V)<<(ASSIST_DEBUG_DATE_S))
#define ASSIST_DEBUG_DATE_V 0xFFFFFFF
#define ASSIST_DEBUG_DATE_S 0
#ifdef __cplusplus
}
#endif
#endif /*_SOC_ASSIST_DEBUG_REG_H_ */

1043
components/soc/esp32h4/include/rev1/soc/clkrst_reg.h
View File

File diff suppressed because it is too large Load Diff

2001
components/soc/esp32h4/include/rev1/soc/efuse_reg.h
View File

File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More