alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

spi_flash: remove xmc hpm support, because there is some compatible issue with ROM,

Browse Source 
Closes https://github.com/espressif/esp-idf/issues/8560
This commit is contained in:
Cao Sen Miao 2022-03-14 17:06:30 +08:00
parent 4074221540
commit b0ceb22bef
2 changed files with 5 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/bootloader_support/src/flash_qio_mode.c
View File

@ -173,7 +173,7 @@ unsigned bootloader_read_status_8b_rdsr3(void)
return bootloader_execute_flash_command(CMD_RDSR3, 0, 0, 8); return bootloader_execute_flash_command(CMD_RDSR3, 0, 0, 8);
} }
static unsigned read_status_16b_rdsr_rdsr2(void) unsigned bootloader_read_status_16b_rdsr_rdsr2(void)
{ {
return bootloader_execute_flash_command(CMD_RDSR, 0, 0, 8) | (bootloader_execute_flash_command(CMD_RDSR2, 0, 0, 8) << 8); return bootloader_execute_flash_command(CMD_RDSR, 0, 0, 8) | (bootloader_execute_flash_command(CMD_RDSR2, 0, 0, 8) << 8);
} }

9
components/spi_flash/spi_flash_hpm_enable.c
View File

@ -80,7 +80,7 @@ static spi_flash_requirement_t spi_flash_hpm_chip_hpm_requirement_check_with_cmd
/* The flash listed here should enter the HPM with command 0xA3 */ /* The flash listed here should enter the HPM with command 0xA3 */
case 0xC84016: case 0xC84016:
case 0xC84017: case 0xC84017:
if (freq_mhz >= 80) { if (freq_mhz > 80) {
chip_cap = SPI_FLASH_HPM_NEEDED; chip_cap = SPI_FLASH_HPM_NEEDED;
} }
break; break;
@ -124,12 +124,9 @@ static esp_err_t spi_flash_high_performance_check_hpf_bit_5(void)
*/ */
static esp_err_t spi_flash_hpm_probe_chip_with_dummy(uint32_t flash_id) static esp_err_t spi_flash_hpm_probe_chip_with_dummy(uint32_t flash_id)
{ {
ESP_EARLY_LOGW(HPM_TAG, "Enter HPM by reconfiguring dummy has not been fully tested");
esp_err_t ret = ESP_OK; esp_err_t ret = ESP_OK;
switch (flash_id) { switch (flash_id) {
/* The flash listed here should enter the HPM by adjusting dummy cycles */ /* The flash listed here should enter the HPM by adjusting dummy cycles */
case 0x204017:
break;
default: default:
ret = ESP_ERR_NOT_FOUND; ret = ESP_ERR_NOT_FOUND;
break; break;
@ -240,7 +237,9 @@ esp_err_t spi_flash_enable_high_performance_mode(void)
chip_hpm = chip; chip_hpm = chip;
if (ret != ESP_OK) { if (ret != ESP_OK) {
ESP_EARLY_LOGE(HPM_TAG, "Flash high performance mode hasn't been supported"); #if (FLASH_FREQUENCY == 120)
ESP_EARLY_LOGW(HPM_TAG, "Flash high performance mode hasn't been supported");
#endif
return ret; return ret;
} }