fix(bootloader): Update pin range for factory reset and app test

Update the range for pin selection of BOOTLOADER_NUM_PIN_APP_TEST
and BOOTLOADER_NUM_PIN_FACTORY_RESET based on the selected target.

Closes https://github.com/espressif/esp-idf/issues/14508
This commit is contained in:
Guillaume Souchere 2024-09-05 09:38:32 +02:00
parent d3631b3afa
commit ab4e658af6

View File

@ -158,13 +158,23 @@ menu "Bootloader config"
int "Number of the GPIO input for factory reset"
depends on BOOTLOADER_FACTORY_RESET
range 0 39 if IDF_TARGET_ESP32
range 0 44 if IDF_TARGET_ESP32S2
range 0 46 if IDF_TARGET_ESP32S2
range 0 48 if IDF_TARGET_ESP32S3
range 0 20 if IDF_TARGET_ESP32C2
range 0 21 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C61
range 0 28 if IDF_TARGET_ESP32C5
range 0 30 if IDF_TARGET_ESP32C6
range 0 27 if IDF_TARGET_ESP32H2
range 0 54 if IDF_TARGET_ESP32P4
default 4
help
The selected GPIO will be configured as an input with internal pull-up enabled (note that on some SoCs.
not all pins have an internal pull-up, consult the hardware datasheet for details.) To trigger a factory
The selected GPIO will be configured as an input with internal pull-up enabled. To trigger a factory
reset, this GPIO must be held high or low (as configured) on startup.
Note that on some SoCs not all pins have an internal pull-up and certain pins are already
used by ROM bootloader as bootstrapping. Refer to the technical reference manual for further
details on the selected SoC.
choice BOOTLOADER_FACTORY_RESET_PIN_LEVEL
bool "Factory reset GPIO level"
depends on BOOTLOADER_FACTORY_RESET
@ -210,14 +220,25 @@ menu "Bootloader config"
config BOOTLOADER_NUM_PIN_APP_TEST
int "Number of the GPIO input to boot TEST partition"
depends on BOOTLOADER_APP_TEST
range 0 39
range 0 39 if IDF_TARGET_ESP32
range 0 46 if IDF_TARGET_ESP32S2
range 0 48 if IDF_TARGET_ESP32S3
range 0 20 if IDF_TARGET_ESP32C2
range 0 21 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C61
range 0 28 if IDF_TARGET_ESP32C5
range 0 30 if IDF_TARGET_ESP32C6
range 0 27 if IDF_TARGET_ESP32H2
range 0 54 if IDF_TARGET_ESP32P4
default 18
help
The selected GPIO will be configured as an input with internal pull-up enabled.
To trigger a test app, this GPIO must be pulled low on reset.
After the GPIO input is deactivated and the device reboots, the old application will boot.
(factory or OTA[x]).
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
Note that on some SoCs not all pins have an internal pull-up and certain pins are already
used by ROM bootloader as bootstrapping. Refer to the technical reference manual for further
details on the selected SoC.
choice BOOTLOADER_APP_TEST_PIN_LEVEL
bool "App test GPIO level"