mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
Merge branch 'docs/remove_user_guide_for_esp32_pico_kit_related_migration_v5.0' into 'release/v5.0'
Some checks failed
docker / docker (push) Has been cancelled
Some checks failed
docker / docker (push) Has been cancelled
docs: remove user guide for esp32-pico-kit related docs after migration (v5.0) See merge request espressif/esp-idf!32784
This commit is contained in:
Krzysztof Budzynski
commit
a9d75f56f1
BIN
docs/_static/esp32-pico-kit-1-block.png
vendored
BIN
docs/_static/esp32-pico-kit-1-block.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 53 KiB |
BIN
docs/_static/esp32-pico-kit-1-layout-front.png
vendored
BIN
docs/_static/esp32-pico-kit-1-layout-front.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 281 KiB |
BIN
docs/_static/esp32-pico-kit-1-overview.png
vendored
BIN
docs/_static/esp32-pico-kit-1-overview.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 491 KiB |
BIN
docs/_static/esp32-pico-kit-1-pinout.png
vendored
BIN
docs/_static/esp32-pico-kit-1-pinout.png
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 646 KiB |
BIN
docs/_static/esp32-pico-kit-v3-layout.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v3-layout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 113 KiB |
BIN
docs/_static/esp32-pico-kit-v4-dimensions-back.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v4-dimensions-back.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 49 KiB |
BIN
docs/_static/esp32-pico-kit-v4-dimensions-side.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v4-dimensions-side.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 24 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 32 KiB |
BIN
docs/_static/esp32-pico-kit-v4-layout.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v4-layout.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 81 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 246 KiB |
BIN
docs/_static/esp32-pico-kit-v4.1-dimensions-back.jpg
vendored
BIN
docs/_static/esp32-pico-kit-v4.1-dimensions-back.jpg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 51 KiB |
BIN
docs/_static/esp32-pico-kit-v4.1-f-layout.jpeg
vendored
BIN
docs/_static/esp32-pico-kit-v4.1-f-layout.jpeg
vendored
Binary file not shown.
|
Before Width: | Height: | Size: 216 KiB |
@ -84,10 +84,10 @@ If you have one of {IDF_TARGET_NAME} official development boards listed below, y
|
||||
|
||||
ESP32-DevKitC <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-devkitc/index.html>
|
||||
ESP-WROVER-KIT <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp-wrover-kit/index.html>
|
||||
ESP32-PICO-KIT <../hw-reference/esp32/get-started-pico-kit>
|
||||
ESP32-PICO-KIT <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-pico-kit/index.html>
|
||||
ESP32-Ethernet-Kit <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-ethernet-kit/index.html>
|
||||
ESP32-DevKit-S(-R) <../hw-reference/esp32/user-guide-devkits-r-v1.1>
|
||||
ESP32-PICO-KIT-1 <../hw-reference/esp32/get-started-pico-kit-1>
|
||||
ESP32-PICO-KIT-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-pico-kit-1/index.html>
|
||||
ESP32-PICO-DevKitM-2 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-pico-devkitm-2/index.html>
|
||||
ESP32-DevKitM-1 <../hw-reference/esp32/user-guide-devkitm-1>
|
||||
|
||||
|
||||
@ -1,369 +0,0 @@
|
||||
ESP32-PICO-KIT-1
|
||||
*****************
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
Overview
|
||||
===========
|
||||
|
||||
ESP32-PICO-KIT-1 is an ESP32-based development board produced by `Espressif <https://espressif.com>`_.
|
||||
|
||||
The core of this board is `ESP32-PICO-V3 <https://www.espressif.com/en/products/socs>`_ - a System-in-Package (SiP) module with complete Wi-Fi and Bluetooth functionalities. Compared to other ESP32 modules, ESP32-PICO-V3 integrates the following peripheral components in one single package, which otherwise would need to be installed separately:
|
||||
|
||||
- 40 MHz crystal oscillator
|
||||
- 4 MB flash
|
||||
- Filter capacitors
|
||||
- RF matching network
|
||||
|
||||
This setup reduces the costs of additional external components as well as the cost of assembly and testing and also increases the overall usability of the product.
|
||||
|
||||
The development board features a USB-to-UART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging.
|
||||
|
||||
All the IO signals and system power on ESP32-PICO-V3 are led out to two rows of 18 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers.
|
||||
|
||||
.. note::
|
||||
|
||||
ESP32-PICO-KIT-1 comes with male headers by default.
|
||||
|
||||
ESP32-PICO-KIT-1 provides the users with hardware for development of applications based on the ESP32, making it easier for users to explore ESP32 functionalities.
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-overview.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 Overview (click to enlarge)
|
||||
|
||||
This guide covers:
|
||||
|
||||
- `Getting Started`_: Provides an overview of the ESP32-PICO-KIT-1 and software setup instructions to get started.
|
||||
- `Contents and Packaging`_: Provides information about packaging and contents for retail and wholesale orders.
|
||||
- `Hardware Reference`_: Provides more detailed information about the ESP32-PICO-KIT-1’s hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP32-PICO-KIT-1.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
Getting Started
|
||||
================
|
||||
|
||||
This section describes how to get started with the ESP32-PICO-KIT-1. It begins with a few introductory sections about the ESP32-PICO-KIT-1, then Section `Start Application Development`_ provides instructions on how to flash firmware onto the ESP32-PICO-KIT-1.
|
||||
|
||||
.. _get-started-pico-kit-1-board-front:
|
||||
|
||||
Description of Components
|
||||
--------------------------
|
||||
|
||||
The following figure and the table below describe the key components, interfaces, and controls of the ESP32-PICO-KIT-1 board.
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-layout-front.png
|
||||
:align: center
|
||||
:scale: 90%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 board layout - front (click to enlarge)
|
||||
|
||||
|
||||
Below is the description of the items identified in the figure starting from the top left corner and going clockwise.
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 25
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-PICO-V3
|
||||
- Standard ESP32-PICO-V3 module soldered to the ESP32-PICO-KIT-1 board. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the SiP module, requiring only an external antenna with LC matching network, decoupling capacitors, and a pull-up resistor for EN signals to function properly.
|
||||
* - LDO
|
||||
- 5V-to-3.3V Low dropout voltage regulator (LDO).
|
||||
* - USB-to-UART bridge
|
||||
- CP2102N, single-chip USB-to-UART bridge that offers up to 3 Mbps transfers rates.
|
||||
* - Micro USB Port
|
||||
- USB interface. Power supply for the board as well as the communication interface between a computer and the board.
|
||||
* - 5V Power On LED
|
||||
- This red LED turns on when power is supplied to the board. For details, see the schematic in `Related Documents`_.
|
||||
* - I/O Connector
|
||||
- All the pins on ESP32-PICO-V3 are broken out to pin headers. You can program ESP32 to enable multiple functions, such as PWM, ADC, DAC, I2C, I2S, SPI, etc. For details, please see Section `Pin Descriptions`_.
|
||||
* - BOOT Button
|
||||
- Download button. Holding down **Boot** and then pressing **EN** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - EN Button
|
||||
- Reset button.
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-PICO-KIT-1, please make sure that the board is in good condition with no obvious signs of damage.
|
||||
|
||||
Required Hardware
|
||||
"""""""""""""""""""
|
||||
|
||||
- 1 x ESP32-PICO-KIT-1
|
||||
- 1 x USB 2.0 A to Micro B cable
|
||||
- 1 x Computer running Windows, Linux, or macOS
|
||||
|
||||
.. _user-guide-pico-kit-1-software-setup:
|
||||
|
||||
Software Setup
|
||||
""""""""""""""""
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
=======================
|
||||
|
||||
Retail Orders
|
||||
---------------
|
||||
|
||||
If you order one or several samples of the board, each ESP32-PICO-KIT-1 development board comes in an individual package.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
------------------
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
Hardware Reference
|
||||
===================
|
||||
|
||||
Block Diagram
|
||||
--------------
|
||||
|
||||
The block diagram below shows the main components of ESP32-PICO-KIT-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-block.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 Block Diagram (click to enlarge)
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
* Micro USB port, default power supply
|
||||
* 5V/GND header pins
|
||||
* 3V3/GND header pins
|
||||
|
||||
.. warning::
|
||||
|
||||
The power supply must be provided using **one and only one of the options above**, otherwise the board and/or the power supply source can be damaged.
|
||||
|
||||
|
||||
Pin Descriptions
|
||||
----------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of I/O header pins on both sides of the board, see :ref:`get-started-pico-kit-1-board-front`. The pin numbering and header names are the same as in the schematic given in `Related Documents`_.
|
||||
|
||||
Header J2
|
||||
""""""""""""
|
||||
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
* - No.
|
||||
- Name
|
||||
- Type
|
||||
- Function
|
||||
* - 1
|
||||
- IO20
|
||||
- I/O
|
||||
- GPIO20
|
||||
* - 2
|
||||
- IO21
|
||||
- I/O
|
||||
- GPIO21, VSPIHD, EMAC_TX_EN
|
||||
* - 3
|
||||
- IO22
|
||||
- I/O
|
||||
- GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
* - 4
|
||||
- IO19
|
||||
- I/O
|
||||
- GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
* - 5
|
||||
- IO8
|
||||
- I/O
|
||||
- GPIO8, SD_DATA1, HS1_DATA1, U2CTS
|
||||
* - 6
|
||||
- IO7
|
||||
- I/O
|
||||
- GPIO7, SD_DATA0, HS1_DATA0, U2RTS
|
||||
* - 7
|
||||
- IO5
|
||||
- I/O
|
||||
- GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||||
* - 8
|
||||
- IO10
|
||||
- I/O
|
||||
- GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
|
||||
* - 9
|
||||
- IO9
|
||||
- I/O
|
||||
- GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
|
||||
* - 10
|
||||
- RXD0
|
||||
- I/O
|
||||
- GPIO3, U0RXD :ref:`(See 1) <get-started-pico-kit-1-pin-notes>`, CLK_OUT2
|
||||
* - 11
|
||||
- TXD0
|
||||
- I/O
|
||||
- GPIO1, U0TXD :ref:`(See 1) <get-started-pico-kit-1-pin-notes>`, CLK_OUT3, EMAC_RXD2
|
||||
* - 12
|
||||
- IO35
|
||||
- I
|
||||
- ADC1_CH7, RTC_GPIO5
|
||||
* - 13
|
||||
- IO34
|
||||
- I
|
||||
- ADC1_CH6, RTC_GPIO4
|
||||
* - 14
|
||||
- IO38
|
||||
- I
|
||||
- GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
* - 15
|
||||
- IO37
|
||||
- I
|
||||
- GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
* - 16
|
||||
- EN
|
||||
- I
|
||||
- CHIP_PU
|
||||
* - 17
|
||||
- GND
|
||||
- P
|
||||
- Ground
|
||||
* - 18
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3 V power supply
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
* - No.
|
||||
- Name
|
||||
- Type
|
||||
- Function
|
||||
* - 1
|
||||
- GND
|
||||
- P
|
||||
- Ground
|
||||
* - 2
|
||||
- SENSOR_VP (FSVP)
|
||||
- I
|
||||
- GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
* - 3
|
||||
- SENSOR_VN (FSVN)
|
||||
- I
|
||||
- GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
* - 4
|
||||
- IO25
|
||||
- I/O
|
||||
- GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
* - 5
|
||||
- IO26
|
||||
- I/O
|
||||
- GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
* - 6
|
||||
- IO32
|
||||
- I/O
|
||||
- 32K_XP :ref:`(See 2a) <get-started-pico-kit-1-pin-notes>`, ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
* - 7
|
||||
- IO33
|
||||
- I/O
|
||||
- 32K_XN :ref:`(See 2b) <get-started-pico-kit-1-pin-notes>`, ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
* - 8
|
||||
- IO27
|
||||
- I/O
|
||||
- GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
||||
* - 9
|
||||
- IO14
|
||||
- I/O
|
||||
- ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
* - 10
|
||||
- IO12
|
||||
- I/O
|
||||
- ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI :ref:`(See 3) <get-started-pico-kit-1-pin-notes>`, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
* - 11
|
||||
- IO13
|
||||
- I/O
|
||||
- ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
* - 12
|
||||
- IO15
|
||||
- I/O
|
||||
- ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
* - 13
|
||||
- IO2
|
||||
- I/O
|
||||
- ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||||
* - 14
|
||||
- IO4
|
||||
- I/O
|
||||
- ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
* - 15
|
||||
- IO0
|
||||
- I/O
|
||||
- ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
||||
* - 16
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3V power supply
|
||||
* - 17
|
||||
- GND
|
||||
- P
|
||||
- Ground
|
||||
* - 18
|
||||
- EXT_5V (5V)
|
||||
- P
|
||||
- 5V power supply
|
||||
|
||||
|
||||
.. _get-started-pico-kit-1-pin-notes:
|
||||
|
||||
.. note::
|
||||
|
||||
1. This pin is connected to the pin of the USB bridge chip on the board.
|
||||
2. 32.768 kHz crystal oscillator:
|
||||
a) input
|
||||
b) output
|
||||
3. The operating voltage of ESP32-PICO-KIT-1’s embedded SPI flash is 3.3 V. Therefore, the strapping pin MTDI should be pulled down during the module power-on reset. If connected, please make sure that this pin is not held up on reset.
|
||||
|
||||
|
||||
Pin Layout
|
||||
""""""""""""
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-pinout.png
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 Pin Layout(click to enlarge)
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
Related Documents
|
||||
===================
|
||||
|
||||
* `ESP32-PICO-V3 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-v3_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
* `ESP32-PICO-KIT-1 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-PICO-KIT-1_V1_0_20200811A.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT-1 PCB Layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-PICO-KIT-1_V1.0_20200811.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,79 +0,0 @@
|
||||
ESP32-PICO-KIT V3 Getting Started Guide
|
||||
=======================================
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This guide shows how to get started with the ESP32-PICO-KIT V3 mini development board. For the description of other ESP32-PICO-KIT versions, please check :doc:`../../hw-reference/index`.
|
||||
|
||||
|
||||
What You Need
|
||||
-------------
|
||||
|
||||
* ESP32-PICO-KIT V3 mini development board
|
||||
* USB 2.0 A to Micro B cable
|
||||
* Computer running Windows, Linux, or macOS
|
||||
|
||||
You can skip the introduction sections and go directly to Section `Start Application Development`_.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT V3 is an ESP32-based mini development board produced by `Espressif <https://espressif.com>`_. The core of this board is ESP32-PICO-D4 - a System-in-Package (SiP) module.
|
||||
|
||||
The development board features a USB-UART Bridge circuit, which allows developers to connect the board to a computer's USB port for flashing and debugging.
|
||||
|
||||
All the IO signals and system power on ESP32-PICO-D4 are led out to two rows of 20 x 0.1" header pads on both sides of the development board for easy access.
|
||||
|
||||
|
||||
Functional Description
|
||||
----------------------
|
||||
|
||||
The following figure and the table below describe the key components, interfaces, and controls of the ESP32-PICO-KIT V3 board.
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v3-layout.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V3 board layout
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT V3 board layout
|
||||
|
||||
Below is the description of the items identified in the figure starting from the top left corner and going clockwise.
|
||||
|
||||
.. list-table::
|
||||
:widths: 25 75
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-PICO-D4
|
||||
- Standard ESP32-PICO-D4 module soldered to the ESP32-PICO-KIT V3 board. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the SiP module, requiring only an external antenna with LC matching network, decoupling capacitors, and a pull-up resistor for EN signals to function properly.
|
||||
* - LDO
|
||||
- 5V-to-3.3V Low dropout voltage regulator (LDO).
|
||||
* - USB-UART bridge
|
||||
- Single-chip USB-UART bridge provides up to 1 Mbps transfers rates.
|
||||
* - Micro USB Port
|
||||
- USB interface. Power supply for the board as well as the communication interface between a computer and the board.
|
||||
* - Power On LED
|
||||
- This red LED turns on when power is supplied to the board.
|
||||
* - I/O
|
||||
- All the pins on ESP32-PICO-D4 are broken out to pin headers. You can program ESP32 to enable multiple functions, such as PWM, ADC, DAC, I2C, I2S, SPI, etc.
|
||||
* - BOOT Button
|
||||
- Download button. Holding down **Boot** and then pressing **EN** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - EN Button
|
||||
- Reset button.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-PICO-KIT V3, please make sure that the board is in good condition with no obvious signs of damage.
|
||||
|
||||
After that, proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an example project onto your board.
|
||||
|
||||
|
||||
Related Documents
|
||||
-----------------
|
||||
|
||||
* `ESP32-PICO-KIT V3 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v3_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-D4 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
@ -1,235 +0,0 @@
|
||||
ESP32-PICO-KIT V4 / V4.1 Getting Started Guide
|
||||
==============================================
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This guide shows how to get started with the ESP32-PICO-KIT V4/V4.1 mini development board. For the description of other ESP32-PICO-KIT versions, please check :doc:`../../hw-reference/index`.
|
||||
|
||||
This particular description covers ESP32-PICO-KIT V4 and V4.1. The difference is the upgraded USB-UART bridge from CP2102 in V4 with up to 1 Mbps transfer rates to CP2102N in V4.1 with up to 3 Mbps transfer rates.
|
||||
|
||||
|
||||
What You Need
|
||||
-------------
|
||||
|
||||
* :ref:`ESP32-PICO-KIT mini development board <get-started-pico-kit-v4-board-front>`
|
||||
* USB 2.0 A to Micro B cable
|
||||
* Computer running Windows, Linux, or macOS
|
||||
|
||||
You can skip the introduction sections and go directly to Section `Start Application Development`_.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT is an ESP32-based mini development board produced by `Espressif <https://espressif.com>`_.
|
||||
|
||||
The core of this board is ESP32-PICO-D4 - a System-in-Package (SiP) module with complete Wi-Fi and Bluetooth functionalities. Compared to other ESP32 modules, ESP32-PICO-D4 integrates the following peripheral components in one single package, which otherwise would need to be installed separately:
|
||||
|
||||
- 40 MHz crystal oscillator
|
||||
- 4 MB flash
|
||||
- Filter capacitors
|
||||
- RF matching links
|
||||
|
||||
This setup reduces the costs of additional external components as well as the cost of assembly and testing and also increases the overall usability of the product.
|
||||
|
||||
The development board features a USB-UART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging.
|
||||
|
||||
All the IO signals and system power on ESP32-PICO-D4 are led out to two rows of 20 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, 2 x 17 header pads are populated with two rows of male pin headers. The remaining 2 x 3 header pads beside the antenna are not populated. These pads may be populated later by the user if required.
|
||||
|
||||
.. note::
|
||||
|
||||
1. There are two versions of ESP32-PICO-KIT boards, respectively with male headers and female headers. In this guide, the male header version is taken as an example.
|
||||
2. The 2 x 3 pads not populated with pin headers are connected to the flash memory embedded in the ESP32-PICO-D4 SiP module. For more details, see module's datasheet in `Related Documents`_.
|
||||
|
||||
Functionality Overview
|
||||
----------------------
|
||||
|
||||
The block diagram below shows the main components of ESP32-PICO-KIT and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4-functional-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT functional block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT block diagram
|
||||
|
||||
|
||||
Functional Description
|
||||
----------------------
|
||||
|
||||
The following figure and the table below describe the key components, interfaces, and controls of the ESP32-PICO-KIT board.
|
||||
|
||||
.. _get-started-pico-kit-v4-board-front:
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4.1-f-layout.jpeg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT board layout (with female headers)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT board layout (with female headers)
|
||||
|
||||
Below is the description of the items identified in the figure starting from the top left corner and going clockwise.
|
||||
|
||||
.. list-table::
|
||||
:widths: 25 75
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-PICO-D4
|
||||
- Standard ESP32-PICO-D4 module soldered to the ESP32-PICO-KIT board. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the SiP module, requiring only an external antenna with LC matching network, decoupling capacitors, and a pull-up resistor for EN signals to function properly.
|
||||
* - LDO
|
||||
- 5V-to-3.3V Low dropout voltage regulator (LDO).
|
||||
* - USB-UART bridge
|
||||
- Single-chip USB-UART bridge: CP2102 in V4 provides up to 1 Mbps transfer rates and CP2102N in V4.1 offers up to 3 Mbps transfers rates.
|
||||
* - Micro USB Port
|
||||
- USB interface. Power supply for the board as well as the communication interface between a computer and the board.
|
||||
* - 5V Power On LED
|
||||
- This red LED turns on when power is supplied to the board. For details, see the schematics in `Related Documents`_.
|
||||
* - I/O
|
||||
- All the pins on ESP32-PICO-D4 are broken out to pin headers. You can program ESP32 to enable multiple functions, such as PWM, ADC, DAC, I2C, I2S, SPI, etc. For details, please see Section `Pin Descriptions`_.
|
||||
* - BOOT Button
|
||||
- Download button. Holding down **Boot** and then pressing **EN** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - EN Button
|
||||
- Reset button.
|
||||
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
|
||||
* Micro USB port, default power supply
|
||||
* 5V / GND header pins
|
||||
* 3V3 / GND header pins
|
||||
|
||||
.. warning::
|
||||
|
||||
The power supply must be provided using **one and only one of the options above**, otherwise the board and/or the power supply source can be damaged.
|
||||
|
||||
|
||||
Pin Descriptions
|
||||
----------------
|
||||
|
||||
The two tables below provide the **Name** and **Function** of I/O header pins on both sides of the board, see :ref:`get-started-pico-kit-v4-board-front`. The pin numbering and header names are the same as in the schematic given in `Related Documents`_.
|
||||
|
||||
|
||||
Header J2
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
No. Name Type Function
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_SD1 (FSD1) I/O | GPIO8, SD_DATA1, SPID, HS1_DATA1 :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U2CTS
|
||||
2 FLASH_SD3 (FSD3) I/O | GPIO7, SD_DATA0, SPIQ, HS1_DATA0 :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U2RTS
|
||||
3 FLASH_CLK (FCLK) I/O | GPIO6, SD_CLK, SPICLK, HS1_CLK :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U1CTS
|
||||
4 IO21 I/O | GPIO21, VSPIHD, EMAC_TX_EN
|
||||
5 IO22 I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
6 IO19 I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
7 IO23 I/O | GPIO23, VSPID, HS1_STROBE
|
||||
8 IO18 I/O | GPIO18, VSPICLK, HS1_DATA7
|
||||
9 IO5 I/O | GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||||
10 IO10 I/O | GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
|
||||
11 IO9 I/O | GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
|
||||
12 RXD0 I/O | GPIO3, U0RXD :ref:`(See 3) <get-started-pico-kit-v4-pin-notes>` , CLK_OUT2
|
||||
13 TXD0 I/O | GPIO1, U0TXD :ref:`(See 3) <get-started-pico-kit-v4-pin-notes>` , CLK_OUT3, EMAC_RXD2
|
||||
14 IO35 I | ADC1_CH7, RTC_GPIO5
|
||||
15 IO34 I | ADC1_CH6, RTC_GPIO4
|
||||
16 IO38 I | GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
17 IO37 I | GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
18 EN I | CHIP_PU
|
||||
19 GND P | Ground
|
||||
20 VDD33 (3V3) P | 3.3V power supply
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
No. Name Type Function
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_CS (FCS) I/O | GPIO16, HS1_DATA4 :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U2RXD, EMAC_CLK_OUT
|
||||
2 FLASH_SD0 (FSD0) I/O | GPIO17, HS1_DATA5 :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U2TXD, EMAC_CLK_OUT_180
|
||||
3 FLASH_SD2 (FSD2) I/O | GPIO11, SD_CMD, SPICS0, HS1_CMD :ref:`(See 1) <get-started-pico-kit-v4-pin-notes>` , U1RTS
|
||||
4 SENSOR_VP (FSVP) I | GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
5 SENSOR_VN (FSVN) I | GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
6 IO25 I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
7 IO26 I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
8 IO32 I/O | 32K_XP :ref:`(See 2a) <get-started-pico-kit-v4-pin-notes>` , ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
9 IO33 I/O | 32K_XN :ref:`(See 2b) <get-started-pico-kit-v4-pin-notes>` , ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
10 IO27 I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17
|
||||
| EMAC_RX_DV
|
||||
11 IO14 I/O | ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK,
|
||||
| HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
12 IO12 I/O | ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI :ref:`(See 4) <get-started-pico-kit-v4-pin-notes>` , HSPIQ,
|
||||
| HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
13 IO13 I/O | ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID,
|
||||
| HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
14 IO15 I/O | ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0
|
||||
| HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
15 IO2 I/O | ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP,
|
||||
| HS2_DATA0, SD_DATA0
|
||||
16 IO4 I/O | ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD,
|
||||
| HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
17 IO0 I/O | ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1
|
||||
| EMAC_TX_CLK
|
||||
18 VDD33 (3V3) P | 3.3V power supply
|
||||
19 GND P | Ground
|
||||
20 EXT_5V (5V) P | 5V power supply
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
.. _get-started-pico-kit-v4-pin-notes:
|
||||
|
||||
.. note::
|
||||
|
||||
1. This pin is connected to the flash pin of ESP32-PICO-D4.
|
||||
2. 32.768 kHz crystal oscillator: a) input, b) output.
|
||||
3. This pin is connected to the pin of the USB bridge chip on the board.
|
||||
4. The operating voltage of ESP32-PICO-KIT’s embedded SPI flash is 3.3 V. Therefore, the strapping pin MTDI should hold bit zero during the module power-on reset. If connected, please make sure that this pin is not held up on reset.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-PICO-KIT, please make sure that the board is in good condition with no obvious signs of damage.
|
||||
|
||||
After that, proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an example project onto your board.
|
||||
|
||||
|
||||
Board Dimensions
|
||||
----------------
|
||||
|
||||
The dimensions are 52 x 20.3 x 10 mm (2.1" x 0.8" x 0.4").
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4.1-dimensions-back.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT dimensions - back (with male headers)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT dimensions - back (with male headers)
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4-dimensions-side.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V4 dimensions - side (with male headers)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT dimensions - side (with male headers)
|
||||
|
||||
For the board physical construction details, please refer to its Reference Design listed below.
|
||||
|
||||
|
||||
Related Documents
|
||||
-----------------
|
||||
|
||||
* `ESP32-PICO-KIT V4 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT V4.1 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4.1_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT Reference Design <https://www.espressif.com/sites/default/files/documentation/esp32-pico-kit_v4.1_20180314_en.zip>`_ containing OrCAD schematic, PCB layout, gerbers and BOM
|
||||
* `ESP32-PICO-D4 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
get-started-pico-kit-v3
|
||||
@ -84,10 +84,10 @@
|
||||
|
||||
ESP32-DevKitC <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp32-devkitc/index.html>
|
||||
ESP-WROVER-KIT <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp-wrover-kit/index.html>
|
||||
ESP32-PICO-KIT <../hw-reference/esp32/get-started-pico-kit>
|
||||
ESP32-PICO-KIT <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp32-pico-kit/index.html>
|
||||
ESP32-Ethernet-Kit <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp32-ethernet-kit/index.html>
|
||||
ESP32-DevKit-S(-R) <../hw-reference/esp32/user-guide-devkits-r-v1.1>
|
||||
ESP32-PICO-KIT-1 <../hw-reference/esp32/get-started-pico-kit-1>
|
||||
ESP32-PICO-KIT-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp32-pico-kit-1/index.html>
|
||||
ESP32-PICO-DevKitM-2 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32/esp32-pico-devkitm-2/index.html>
|
||||
ESP32-DevKitM-1 <../hw-reference/esp32/user-guide-devkitm-1>
|
||||
|
||||
|
||||
@ -1,369 +0,0 @@
|
||||
ESP32-PICO-KIT-1
|
||||
*****************
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
概述
|
||||
======
|
||||
|
||||
ESP32-PICO-KIT-1 是一款基于 `ESP32 <https://www.espressif.com/zh-hans/products/socs/esp32>`_ 的乐鑫开发板。
|
||||
|
||||
该开发板搭载 `ESP32-PICO-V3 <https://www.espressif.com/zh-hans/products/socs>`_ （SiP，系统级封装）模组。ESP32-PICO-V3 具备完整的 Wi-Fi 和蓝牙功能，与其它 ESP32 系列模组相比，此模组已集成下述外围组件，无需额外安装：
|
||||
|
||||
- 40 MHz 晶振
|
||||
- 4 MB flash
|
||||
- 滤波电容
|
||||
- 射频匹配网络等
|
||||
|
||||
将上述组件封装至 ESP32-PICO-V3，用户无需额外购买，大大降低了安装和测试的成本，同时也增加了产品的可用性。
|
||||
|
||||
ESP32-PICO-KIT-1 开发板还集成了 USB-to-UART 桥接电路，方便开发人员直接通过 PC 的 USB 端口直接进行固件烧录和调试。
|
||||
|
||||
为方便硬件连接，ESP32-PICO-V3 上的所有 IO 信号和系统电源管脚均引出至开发板两侧焊盘 (18 x 0.1")。上述 18 个焊盘也均引出至排针，可使用杜邦线连接。
|
||||
|
||||
.. note::
|
||||
|
||||
ESP32-PICO-KIT-1 开发板默认采用排针。
|
||||
|
||||
ESP32-PICO-KIT-1 为用户提供了基于 ESP32 芯片应用开发的硬件，更加方便用户探索 ESP32 芯片的功能。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-overview.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 外观图（点击放大）
|
||||
|
||||
本指南包括以下几个章节：
|
||||
|
||||
- `快速入门`_：简要介绍 ESP32-PICO-KIT-1 开发板，以及上手这款开发板所需的软件配置；
|
||||
- `内含组件和包装方式`_：介绍零售订单和批量订单所提供的组件及包装方式；
|
||||
- `硬件参考`_：提供 ESP32-PICO-KIT-1 开发板硬件详细信息；
|
||||
- `硬件版本`_：介绍硬件历史版本（如有），已知问题（如有），并提供链接至历史版本开发板的入门指南（如有）；
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
快速入门
|
||||
========
|
||||
|
||||
本节介绍了如何快速上手 ESP32-PICO-KIT-1。首先对 ESP32-PICO-KIT-1 开发板进行了简要介绍，然后在 `应用开发`_ 小节介绍如何将固件烧录至开发板。
|
||||
|
||||
.. _get-started-pico-kit-1-board-front:
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT-1 开发板的主要组件、接口及控制方式见下图。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-layout-front.png
|
||||
:align: center
|
||||
:scale: 90%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 开发板布局 - 正面（点击放大）
|
||||
|
||||
|
||||
从左上角开始，按顺时针顺序，开发板主要组件的描述见下表。
|
||||
|
||||
.. list-table::
|
||||
:widths: 10 25
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - ESP32-PICO-V3
|
||||
- ESP32-PICO-KIT-1 开发板的板载模组 (SiP)，搭载 ESP32 SoC 芯片，仅需连接天线、LC 匹配电路、去耦电容和一个 EN 信号上拉电阻即可正常工作。
|
||||
* - LDO
|
||||
- 5 V 转 3.3 V 低压差稳压器
|
||||
* - USB-to-UART
|
||||
- CP2102N：单芯片 USB-to-UART 桥接器，数据传输速率可达 3 Mbps。
|
||||
* - Micro-B USB
|
||||
- USB 接口。可为开发板供电，或连接 PC 进行 USB 通信。
|
||||
* - 5V Power On LED
|
||||
- 开发板上电后，红色指示灯亮起。更多信息，见 `相关文档`_ 中提供的原理图。
|
||||
* - I/O Connector
|
||||
- ESP32-PICO-V3 上的管脚均已引出至开发板排针。用户可对 ESP32 进行编程，实现 PWM、ADC、DAC、I2C、I2S、SPI 等功能。更多信息，见章节 `管脚描述`_。
|
||||
* - BOOT 按键
|
||||
- 下载按键。按下 **Boot** 键并保持，同时按下 **EN** 键将进入固件下载模式，通过串口下载固件。
|
||||
* - EN 按键
|
||||
- 复位按键。
|
||||
|
||||
应用开发
|
||||
---------
|
||||
|
||||
上电前，请确保 ESP32-PICO-KIT-1 完好无损。
|
||||
|
||||
所需硬件
|
||||
""""""""
|
||||
|
||||
- 1 x ESP32-PICO-KIT-1 开发板
|
||||
- 1 x USB 2.0 A 转 Micro B 数据线
|
||||
- 1 x PC，运行 Windows、Linux 或 macOS 系统
|
||||
|
||||
.. _user-guide-pico-kit-1-software-setup:
|
||||
|
||||
软件配置
|
||||
"""""""""
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 一节查看如何快速配置开发环境，将应用程序烧录至 ESP32-PICO-KIT-1 开发板。
|
||||
|
||||
|
||||
内含组件和包装方式
|
||||
====================
|
||||
|
||||
零售订单
|
||||
--------
|
||||
|
||||
如购买样品，每个 ESP32-PICO-KIT-1 将单独包装。
|
||||
|
||||
零售订单，请前往 https://www.espressif.com/en/contact-us/get-samples。
|
||||
|
||||
|
||||
批量订单
|
||||
--------
|
||||
|
||||
如批量购买，ESP32-PICO-KIT-1 开发板将以大纸板箱包装。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
---------
|
||||
|
||||
ESP32-PICO-KIT-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-block.png
|
||||
:align: center
|
||||
:scale: 70%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 功能框图（点击放大）
|
||||
|
||||
供电选项
|
||||
---------
|
||||
|
||||
开发板提供以下三种供电方式，可任意选择一种：
|
||||
|
||||
* Micro USB 供电（默认）
|
||||
* 5V/GND 管脚供电
|
||||
* 3V3/GND 管脚供电
|
||||
|
||||
.. warning::
|
||||
|
||||
上述供电方式只能选择一种方式，不能同时选择，否则可能会损坏开发板和/或电源。
|
||||
|
||||
|
||||
管脚描述
|
||||
--------
|
||||
|
||||
:ref:`get-started-pico-kit-1-board-front` 中所示的开发板两侧 I/O 管脚，其具体名称和功能见下表。管脚名称和编号与 `相关文档`_ 中原理图保持一致。
|
||||
|
||||
Header J2
|
||||
""""""""""""
|
||||
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
* - 编号
|
||||
- 名称
|
||||
- 类型
|
||||
- 功能
|
||||
* - 1
|
||||
- IO20
|
||||
- I/O
|
||||
- GPIO20
|
||||
* - 2
|
||||
- IO21
|
||||
- I/O
|
||||
- GPIO21, VSPIHD, EMAC_TX_EN
|
||||
* - 3
|
||||
- IO22
|
||||
- I/O
|
||||
- GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
* - 4
|
||||
- IO19
|
||||
- I/O
|
||||
- GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
* - 5
|
||||
- IO8
|
||||
- I/O
|
||||
- GPIO8, SD_DATA1, HS1_DATA1, U2CTS
|
||||
* - 6
|
||||
- IO7
|
||||
- I/O
|
||||
- GPIO7, SD_DATA0, HS1_DATA0, U2RTS
|
||||
* - 7
|
||||
- IO5
|
||||
- I/O
|
||||
- GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||||
* - 8
|
||||
- IO10
|
||||
- I/O
|
||||
- GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
|
||||
* - 9
|
||||
- IO9
|
||||
- I/O
|
||||
- GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
|
||||
* - 10
|
||||
- RXD0
|
||||
- I/O
|
||||
- GPIO3, U0RXD :ref:`（见注解 1）<get-started-pico-kit-1-pin-notes>`, CLK_OUT2
|
||||
* - 11
|
||||
- TXD0
|
||||
- I/O
|
||||
- GPIO1, U0TXD :ref:`（见注解 1）<get-started-pico-kit-1-pin-notes>`, CLK_OUT3, EMAC_RXD2
|
||||
* - 12
|
||||
- IO35
|
||||
- I
|
||||
- ADC1_CH7, RTC_GPIO5
|
||||
* - 13
|
||||
- IO34
|
||||
- I
|
||||
- ADC1_CH6, RTC_GPIO4
|
||||
* - 14
|
||||
- IO38
|
||||
- I
|
||||
- GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
* - 15
|
||||
- IO37
|
||||
- I
|
||||
- GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
* - 16
|
||||
- EN
|
||||
- I
|
||||
- CHIP_PU
|
||||
* - 17
|
||||
- GND
|
||||
- P
|
||||
- 接地
|
||||
* - 18
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3V 供电
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
* - 编号
|
||||
- 名称
|
||||
- 类型
|
||||
- 功能
|
||||
* - 1
|
||||
- GND
|
||||
- P
|
||||
- 接地
|
||||
* - 2
|
||||
- SENSOR_VP (FSVP)
|
||||
- I
|
||||
- GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
* - 3
|
||||
- SENSOR_VN (FSVN)
|
||||
- I
|
||||
- GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
* - 4
|
||||
- IO25
|
||||
- I/O
|
||||
- GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
* - 5
|
||||
- IO26
|
||||
- I/O
|
||||
- GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
* - 6
|
||||
- IO32
|
||||
- I/O
|
||||
- 32K_XP :ref:`（见注解 2a）<get-started-pico-kit-1-pin-notes>`, ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
* - 7
|
||||
- IO33
|
||||
- I/O
|
||||
- 32K_XN :ref:`（见注解 2b）<get-started-pico-kit-1-pin-notes>`, ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
* - 8
|
||||
- IO27
|
||||
- I/O
|
||||
- GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
||||
* - 9
|
||||
- IO14
|
||||
- I/O
|
||||
- ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
* - 10
|
||||
- IO12
|
||||
- I/O
|
||||
- ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI :ref:`（见注解 3）<get-started-pico-kit-1-pin-notes>`, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
* - 11
|
||||
- IO13
|
||||
- I/O
|
||||
- ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
* - 12
|
||||
- IO15
|
||||
- I/O
|
||||
- ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
* - 13
|
||||
- IO2
|
||||
- I/O
|
||||
- ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||||
* - 14
|
||||
- IO4
|
||||
- I/O
|
||||
- ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
* - 15
|
||||
- IO0
|
||||
- I/O
|
||||
- ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
||||
* - 16
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3V 供电
|
||||
* - 17
|
||||
- GND
|
||||
- P
|
||||
- 接地
|
||||
* - 18
|
||||
- EXT_5V (5V)
|
||||
- P
|
||||
- 5V 供电
|
||||
|
||||
|
||||
.. _get-started-pico-kit-1-pin-notes:
|
||||
|
||||
.. note::
|
||||
|
||||
1. 该管脚已连接至板上 USB 桥接器芯片；
|
||||
2. 32.768 kHz 晶振输入输出管脚：
|
||||
- (a) 输入管脚；
|
||||
- (b) 输出管脚；
|
||||
3. ESP32-PICO-KIT-1 内置 SPI flash 的工作电压为 3.3 V。因此，Strapping 管脚 MTDI 在上电复位过程中应拉低。如果连接了该管脚，请确保该管脚在复位中不要拉高。
|
||||
|
||||
|
||||
管脚布局
|
||||
""""""""""""
|
||||
.. figure:: ../../../_static/esp32-pico-kit-1-pinout.png
|
||||
:align: center
|
||||
:scale: 50%
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 管脚布局（点击放大）
|
||||
|
||||
硬件版本
|
||||
=========
|
||||
|
||||
该开发板为最新硬件，尚未有历史版本。
|
||||
|
||||
相关文档
|
||||
=========
|
||||
|
||||
* `ESP32-PICO-V3 技术规格书 <https://espressif.com/sites/default/files/documentation/esp32-pico-v3_datasheet_cn.pdf>`_ (PDF)
|
||||
* `乐鑫产品选型工具 <https://products.espressif.com/#/product-selector?names=>`__
|
||||
* `ESP32-PICO-KIT-1 原理图 <https://dl.espressif.com/dl/schematics/SCH_ESP32-PICO-KIT-1_V1_0_20200811A.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT-1 PCB 布局图 <https://dl.espressif.com/dl/schematics/PCB_ESP32-PICO-KIT-1_V1.0_20200811.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,79 +0,0 @@
|
||||
ESP32-PICO-KIT V3 入门指南
|
||||
=======================================
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本指南介绍了如何开始使用 ESP32-PICO-KIT V3 迷你开发板。有关 ESP32-PICO-KIT 其他版本的介绍，请见：:doc:`../../hw-reference/index`。
|
||||
|
||||
|
||||
准备工作
|
||||
--------
|
||||
|
||||
* ESP32-PICO-KIT V3 迷你开发板
|
||||
* USB 2.0 线（A 型转 Micro-B 型）
|
||||
* PC（Windows、Linux 或 macOS）
|
||||
|
||||
您可以跳过介绍部分，直接前往 `应用程序开发`_ 章节。
|
||||
|
||||
|
||||
概述
|
||||
----
|
||||
|
||||
ESP32-PICO-KIT V3 是一款来自 `乐鑫 <https://espressif.com>`_ 的迷你开发板，其核心是具有完整 Wi-Fi 和蓝牙功能的 ESP32 系列 SiP 模组 ESP32-PICO-D4。
|
||||
|
||||
ESP32-PICO-KIT 集成了 USB 转 UART 桥接电路，允许开发人员直接通过 PC 的 USB 端口进行下载和调试。
|
||||
|
||||
为了便于连接，ESP32-PICO-D4 上的所有 IO 信号和系统电源管脚均通过开发板两侧焊盘（每侧 20 个 x 0.1 英寸间隔）引出。
|
||||
|
||||
|
||||
功能说明
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT V3 开发板的主要组件、接口及控制方式见下。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v3-layout.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V3 开发板布局
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT V3 开发板布局
|
||||
|
||||
ESP32-PICO-KIT 开发板的主要组件描述见下表。
|
||||
|
||||
.. list-table::
|
||||
:widths: 25 75
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 基本介绍
|
||||
* - ESP32-PICO-D4
|
||||
- ESP32-PICO-KIT V3 开发板上焊接的标准 ESP32-PICO-D4 模组，集成了 ESP32 芯片的完整系统，仅需连接天线、LC 匹配电路、退耦电容和一个 EN 信号上拉电阻即可正常工作。
|
||||
* - LDO
|
||||
- 5V-to-3.3V 低压差稳压器。
|
||||
* - USB-to-UART 桥接器
|
||||
- 单芯片 USB-to-UART 桥接器，可提供高达 1 Mbps 的传输速率。
|
||||
* - Micro USB 端口
|
||||
- USB 接口。可用作开发板的供电电源，或连接 PC 和开发板的通信接口。
|
||||
* - Power On LED
|
||||
- 开发板通电后，该红色指示灯将亮起。
|
||||
* - I/O
|
||||
- ESP32-PICO-D4 的所有管脚均已引出至开发板的排针。用户可以对 ESP32 进行编程，实现 PWM、ADC、DAC、I2C、I2S、SPI 等多种功能。
|
||||
* - BOOT
|
||||
- 下载按键。按下 **Boot** 键并保持，同时按一下 **EN** 键（此时不要松开 **Boot** 键）进入“固件下载”模式，通过串口下载固件。
|
||||
* - EN
|
||||
- 复位按键。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP32-PICO-KIT V3 上电前，请首先确认开发板完好无损。
|
||||
|
||||
现在，请前往 :doc:`../../get-started/index` 中的 :ref:`get-started-step-by-step` 章节，查看如何设置开发环境，并尝试将示例项目烧录至您的开发板。
|
||||
|
||||
|
||||
相关文档
|
||||
-----------------
|
||||
|
||||
* `ESP32-PICO-KIT V3 原理图 <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v3_schematic.pdf>`_ (PDF)
|
||||
* `《ESP32-PICO-D4 技术规格书》 <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_cn.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
@ -1,235 +0,0 @@
|
||||
ESP32-PICO-KIT V4/V4.1 入门指南
|
||||
=======================================================
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本指南介绍了如何开始使用 ESP32-PICO-KIT V4/V4.1 迷你开发板。有关 ESP32-PICO-KIT 其他版本的介绍，请见：:doc:`../../hw-reference/index`。
|
||||
|
||||
本指南仅适用于 ESP32-PICO-KIT V4 和 V4.1。ESP32-PICO-KIT V4.1 与 V4 的最大差别在于桥接器，其中 V4 搭载的 CP2102 USB-to-UART 桥接器最高速率为 1 Mbps，V4.1 搭载的 CP2102N 桥接器最高传输速率 3 Mbps。
|
||||
|
||||
|
||||
准备工作
|
||||
--------
|
||||
|
||||
* :ref:`ESP32-PICO-KIT 迷你开发板 <get-started-pico-kit-v4-board-front>`
|
||||
* USB 2.0 线（A 型转 Micro-B 型）
|
||||
* PC（Windows、Linux 或 macOS）
|
||||
|
||||
您可以跳过介绍部分，直接前往 `应用程序开发`_ 章节。
|
||||
|
||||
|
||||
概述
|
||||
----
|
||||
|
||||
ESP32-PICO-KIT 是一款来自 `乐鑫 <https://espressif.com>`_ 的迷你开发板。
|
||||
|
||||
该开发板的核心是具有完整 Wi-Fi 和蓝牙功能的 ESP32 系列 SiP 模组 ESP32-PICO-D4。与其他 ESP32 系列模组相比，ESP32-PICO-D4 模组已完整集成以下外围器件：
|
||||
|
||||
- 40 MHz 晶体振荡器
|
||||
- 4 MB flash
|
||||
- 滤波电容
|
||||
- 射频匹配网络等
|
||||
|
||||
这大大降低了用户额外采购和安装这些元器件的数量和成本，及额外组装测试的复杂度，并增加了可用性。
|
||||
|
||||
ESP32-PICO-KIT 集成了 USB 转 UART 桥接电路，允许开发人员直接通过 PC 的 USB 端口进行下载和调试。
|
||||
|
||||
为了便于连接，ESP32-PICO-D4 上的所有 IO 信号和系统电源管脚均通过开发板两侧焊盘（每侧 20 个 x 0.1 英寸间隔）引出。为了方便杜邦线的使用，ESP32-PICO-KIT 开发板每侧的 20 个焊盘中，有 17 个引出至排针，另外 3 个靠近天线的焊盘未引出，可供用户日后焊接使用。
|
||||
|
||||
.. note::
|
||||
|
||||
1. ESP32-PICO-D4 开发板目前有两种版本，分别采用排针与排母。本指南默认以排针版本为例。
|
||||
2. 每排未引出至排针的 3 个管脚已连接至 ESP32-PICO-D4 SiP 模组的内置 flash 模块。更多信息，请见 `相关文档`_ 中的模组技术规格书。
|
||||
|
||||
功能概述
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT 开发板的主要组件和连接方式见下。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4-functional-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT 框图
|
||||
|
||||
|
||||
功能说明
|
||||
--------
|
||||
|
||||
ESP32-PICO-KIT 开发板的主要组件、接口及控制方式见下。
|
||||
|
||||
.. _get-started-pico-kit-v4-board-front:
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4.1-f-layout.jpeg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT 开发板布局（排母版）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT 开发板布局（排母版）
|
||||
|
||||
ESP32-PICO-KIT 开发板的主要组件描述见下表（从左上角起顺时针顺序）。
|
||||
|
||||
.. list-table::
|
||||
:widths: 25 75
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 基本介绍
|
||||
* - ESP32-PICO-D4
|
||||
- ESP32-PICO-KIT 开发板上焊接的标准 ESP32-PICO-D4 模组，集成了 ESP32 芯片的完整系统，仅需连接天线、LC 匹配电路、退耦电容和一个 EN 信号上拉电阻即可正常工作。
|
||||
* - LDO
|
||||
- 5V-to-3.3V 低压差稳压器
|
||||
* - USB-to-UART 桥接器
|
||||
- 单芯片 USB-to-UART 桥接器。V4 版本搭载的 CP2102 可提供高达 1 Mbps 的传输速率，V4.1 版本搭载的 CP2102N 可提供高达 3 Mbps 的传输速率。
|
||||
* - Micro USB 端口
|
||||
- USB 接口。可用作开发板的供电电源，或连接 PC 和开发板的通信接口。
|
||||
* - 5V Power On LED
|
||||
- 开发板通电后，该红色指示灯将亮起。更多信息，请见 `相关文档`_ 中的原理图。
|
||||
* - I/O
|
||||
- ESP32-PICO-D4 的所有管脚均已引出至开发板的排针。用户可以对 ESP32 进行编程，实现 PWM、ADC、DAC、I2C、I2S、SPI 等多种功能。更多详情，请见章节 `管脚说明`_。
|
||||
* - BOOT
|
||||
- 下载按键。按下 **Boot** 键并保持，同时按一下 **EN** 键（此时不要松开 **Boot** 键）进入“固件下载”模式，通过串口下载固件。
|
||||
* - EN
|
||||
- 复位按键。
|
||||
|
||||
|
||||
电源选项
|
||||
--------
|
||||
|
||||
开发板可任一选用以下三种供电方式：
|
||||
|
||||
* Micro USB 供电（默认）
|
||||
* 5V / GND 管脚供电
|
||||
* 3V3 / GND 管脚供电
|
||||
|
||||
.. warning::
|
||||
|
||||
上述供电模式 **不可同时连接**，否则可能会损坏开发板和/或电源。
|
||||
|
||||
|
||||
管脚说明
|
||||
----------
|
||||
|
||||
下表介绍了开发板 I/O 管脚的 **名称** 和 **功能**，具体布局请见 `相关文档`_ 中的原理图。请参考 :ref:`get-started-pico-kit-v4-board-front`。
|
||||
|
||||
|
||||
Header J2
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
编号 名称 类型 功能
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_SD1 (FSD1) I/O | GPIO8, SD_DATA1, SPID, HS1_DATA1 :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U2CTS
|
||||
2 FLASH_SD3 (FSD3) I/O | GPIO7, SD_DATA0, SPIQ, HS1_DATA0 :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U2RTS
|
||||
3 FLASH_CLK (FCLK) I/O | GPIO6, SD_CLK, SPICLK, HS1_CLK :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U1CTS
|
||||
4 IO21 I/O | GPIO21, VSPIHD, EMAC_TX_EN
|
||||
5 IO22 I/O | GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
6 IO19 I/O | GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
7 IO23 I/O | GPIO23, VSPID, HS1_STROBE
|
||||
8 IO18 I/O | GPIO18, VSPICLK, HS1_DATA7
|
||||
9 IO5 I/O | GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
||||
10 IO10 I/O | GPIO10, SD_DATA3, SPIWP, HS1_DATA3, U1TXD
|
||||
11 IO9 I/O | GPIO9, SD_DATA2, SPIHD, HS1_DATA2, U1RXD
|
||||
12 RXD0 I/O | GPIO3, U0RXD :ref:`（见说明 3） <get-started-pico-kit-v4-pin-notes>` , CLK_OUT2
|
||||
13 TXD0 I/O | GPIO1, U0TXD :ref:`（见说明 3） <get-started-pico-kit-v4-pin-notes>` , CLK_OUT3, EMAC_RXD2
|
||||
14 IO35 I | ADC1_CH7, RTC_GPIO5
|
||||
15 IO34 I | ADC1_CH6, RTC_GPIO4
|
||||
16 IO38 I | GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
17 IO37 I | GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
18 EN I | CHIP_PU
|
||||
19 GND P | Ground
|
||||
20 VDD33 (3V3) P | 3.3V 电源
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
====== ================= ====== ======================================================
|
||||
No. Name Type Function
|
||||
====== ================= ====== ======================================================
|
||||
1 FLASH_CS (FCS) I/O | GPIO16, HS1_DATA4 :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U2RXD, EMAC_CLK_OUT
|
||||
2 FLASH_SD0 (FSD0) I/O | GPIO17, HS1_DATA5 :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U2TXD, EMAC_CLK_OUT_180
|
||||
3 FLASH_SD2 (FSD2) I/O | GPIO11, SD_CMD, SPICS0, HS1_CMD :ref:`（见说明 1） <get-started-pico-kit-v4-pin-notes>` , U1RTS
|
||||
4 SENSOR_VP (FSVP) I | GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
5 SENSOR_VN (FSVN) I | GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
6 IO25 I/O | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
7 IO26 I/O | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
8 IO32 I/O | 32K_XP :ref:`（见说明 2a） <get-started-pico-kit-v4-pin-notes>` , ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
9 IO33 I/O | 32K_XN :ref:`（见说明 2b） <get-started-pico-kit-v4-pin-notes>` , ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
10 IO27 I/O | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17
|
||||
| EMAC_RX_DV
|
||||
11 IO14 I/O | ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK,
|
||||
| HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
12 IO12 I/O | ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI :ref:`（见说明 4） <get-started-pico-kit-v4-pin-notes>` , HSPIQ,
|
||||
| HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
13 IO13 I/O | ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID,
|
||||
| HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
14 IO15 I/O | ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0
|
||||
| HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
15 IO2 I/O | ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP,
|
||||
| HS2_DATA0, SD_DATA0
|
||||
16 IO4 I/O | ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD,
|
||||
| HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
17 IO0 I/O | ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1
|
||||
| EMAC_TX_CLK
|
||||
18 VDD33 (3V3) P | 3.3V 电源
|
||||
19 GND P | Ground
|
||||
20 EXT_5V (5V) P | 5V 电源
|
||||
====== ================= ====== ======================================================
|
||||
|
||||
|
||||
.. _get-started-pico-kit-v4-pin-notes:
|
||||
|
||||
.. note::
|
||||
|
||||
1. 该管脚已连接至 ESP32-PICO-D4 的内置 flash 管脚。
|
||||
2. 32.768 kHz 晶振：(a) 输入；(b) 输出。
|
||||
3. 该管脚已连接至开发板的 USB 桥接器芯片。
|
||||
4. ESP32-PICO-KIT 内置 SPI flash 的工作电压为 3.3 V。因此，strapping 管脚 MTDI 在模组上电复位过程中应保持低电平。如连接该管脚，请确保该管脚在复位中不要保持高电平。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP32-PICO-KIT 上电前，请首先确认开发板完好无损。
|
||||
|
||||
现在，请前往 :doc:`../../get-started/index` 中的 :ref:`get-started-step-by-step` 章节，查看如何设置开发环境，并尝试将示例项目烧录至您的开发板。
|
||||
|
||||
|
||||
开发板尺寸
|
||||
----------
|
||||
|
||||
ESP32-PICO-KIT 的尺寸为 52 x 20.3 x 10 mm (2.1" x 0.8" x 0.4")。
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4.1-dimensions-back.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT 尺寸图 -- 背面（排针版）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT 尺寸图 -- 背面（排针版）
|
||||
|
||||
.. figure:: ../../../_static/esp32-pico-kit-v4-dimensions-side.jpg
|
||||
:align: center
|
||||
:alt: ESP32-PICO-KIT V4 尺寸图 -- 侧面（排针版）
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT 尺寸图 -- 侧面（排针版）
|
||||
|
||||
有关开发板的物理结构细节，请见下方参考设计。
|
||||
|
||||
|
||||
相关文档
|
||||
-----------------
|
||||
|
||||
* `ESP32-PICO-KIT V4 原理图 <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT V4.1 原理图 <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4.1_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT 参考设计 <https://www.espressif.com/sites/default/files/documentation/esp32-pico-kit_v4.1_20180314_cn.zip>`_ ，内含 OrCAD 原理图、PCB 布局、Gerbers 和 BOM 表
|
||||
* `《ESP32-PICO-D4 技术规格书》 <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_cn.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
get-started-pico-kit-v3
|
||||
Loading…
Reference in New Issue
Block a user