fix(wifi): fix deinit init wifi scan fail issue

This commit is contained in:
muhaidong 2023-11-06 18:01:07 +08:00
parent eb53913f47
commit a3d4897e60
3 changed files with 12 additions and 3 deletions

View File

@ -298,11 +298,17 @@ void IRAM_ATTR esp_wifi_bt_power_domain_on(void)
_lock_acquire(&s_wifi_bt_pd_controller.lock);
if (s_wifi_bt_pd_controller.count++ == 0) {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PWC_REG, RTC_CNTL_WIFI_FORCE_PD);
#if !CONFIG_IDF_TARGET_ESP32
esp_rom_delay_us(10);
wifi_bt_common_module_enable();
#if CONFIG_IDF_TARGET_ESP32
DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG, MODEM_RESET_FIELD_WHEN_PU);
DPORT_CLEAR_PERI_REG_MASK(DPORT_CORE_RST_EN_REG, MODEM_RESET_FIELD_WHEN_PU);
#else
SET_PERI_REG_MASK(SYSCON_WIFI_RST_EN_REG, MODEM_RESET_FIELD_WHEN_PU);
CLEAR_PERI_REG_MASK(SYSCON_WIFI_RST_EN_REG, MODEM_RESET_FIELD_WHEN_PU);
#endif
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_WIFI_FORCE_ISO);
wifi_bt_common_module_disable();
}
_lock_release(&s_wifi_bt_pd_controller.lock);
}

View File

@ -1088,8 +1088,10 @@
#define DPORT_RW_BTMAC_RST BIT(9)
#define DPORT_RW_BTLP_RST BIT(10)
//ESP32 should not reset FE in esp_wifi_bt_power_domain_on().
//The FE of ESP32 is not in the WIFI PD power domain.
//When turning off WIFI PD, the FE will not power down, so phy_wakeup_init() did not rewrite the FE register.
#define MODEM_RESET_FIELD_WHEN_PU (DPORT_WIFIBB_RST | \
DPORT_FE_RST | \
DPORT_WIFIMAC_RST | \
DPORT_BTBB_RST | \
DPORT_BTMAC_RST | \

View File

@ -443,7 +443,8 @@ extern "C" {
#define DPORT_WIFI_CLK_BT_EN_V 0x61
#define DPORT_WIFI_CLK_BT_EN_S 11
/* Mask for clock bits used by both WIFI and Bluetooth, bit 0, 3, 6, 7, 8, 9 */
#define DPORT_WIFI_CLK_WIFI_BT_COMMON_M 0x000003c9
#define SYSTEM_WIFI_CLK_WIFI_BT_COMMON_M 0x000003c9
#define DPORT_WIFI_CLK_WIFI_BT_COMMON_M SYSTEM_WIFI_CLK_WIFI_BT_COMMON_M
/* Digital team to check */
//bluetooth baseband bit11