diff --git a/components/driver/include/esp_private/spi_common_internal.h b/components/driver/include/esp_private/spi_common_internal.h
index e3127d4831..83b9c1ad6b 100644
--- a/components/driver/include/esp_private/spi_common_internal.h
+++ b/components/driver/include/esp_private/spi_common_internal.h
@@ -227,7 +227,8 @@ int spicommon_irqdma_source_for_host(spi_host_device_t host);
 */
 typedef void(*dmaworkaround_cb_t)(void *arg);
 
-
+#if CONFIG_IDF_TARGET_ESP32
+//This workaround is only for esp32
 /**
  * @brief Request a reset for a certain DMA channel
  *
@@ -274,6 +275,7 @@ void spicommon_dmaworkaround_idle(int dmachan);
  * be affected by a global SPI DMA reset, and a reset like that should not be attempted.
  */
 void spicommon_dmaworkaround_transfer_active(int dmachan);
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
 /*******************************************************************************
  * Bus attributes
diff --git a/components/driver/spi_common.c b/components/driver/spi_common.c
index aa2c05dd61..308875172e 100644
--- a/components/driver/spi_common.c
+++ b/components/driver/spi_common.c
@@ -913,11 +913,10 @@ static dmaworkaround_cb_t dmaworkaround_cb;
 static void *dmaworkaround_cb_arg;
 static portMUX_TYPE dmaworkaround_mux = portMUX_INITIALIZER_UNLOCKED;
 static int dmaworkaround_waiting_for_chan = 0;
-#endif
 
 bool IRAM_ATTR spicommon_dmaworkaround_req_reset(int dmachan, dmaworkaround_cb_t cb, void *arg)
 {
-#if CONFIG_IDF_TARGET_ESP32
+
     int otherchan = (dmachan == 1) ? 2 : 1;
     bool ret;
     portENTER_CRITICAL_ISR(&dmaworkaround_mux);
@@ -934,24 +933,15 @@ bool IRAM_ATTR spicommon_dmaworkaround_req_reset(int dmachan, dmaworkaround_cb_t
     }
     portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
     return ret;
-#else
-    //no need to reset
-    return true;
-#endif
 }
 
 bool IRAM_ATTR spicommon_dmaworkaround_reset_in_progress(void)
 {
-#if CONFIG_IDF_TARGET_ESP32
     return (dmaworkaround_waiting_for_chan != 0);
-#else
-    return false;
-#endif
 }
 
 void IRAM_ATTR spicommon_dmaworkaround_idle(int dmachan)
 {
-#if CONFIG_IDF_TARGET_ESP32
     portENTER_CRITICAL_ISR(&dmaworkaround_mux);
     dmaworkaround_channels_busy[dmachan-1] = 0;
     if (dmaworkaround_waiting_for_chan == dmachan) {
@@ -963,14 +953,12 @@ void IRAM_ATTR spicommon_dmaworkaround_idle(int dmachan)
 
     }
     portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
-#endif
 }
 
 void IRAM_ATTR spicommon_dmaworkaround_transfer_active(int dmachan)
 {
-#if CONFIG_IDF_TARGET_ESP32
     portENTER_CRITICAL_ISR(&dmaworkaround_mux);
     dmaworkaround_channels_busy[dmachan-1] = 1;
     portEXIT_CRITICAL_ISR(&dmaworkaround_mux);
-#endif
 }
+#endif //#if CONFIG_IDF_TARGET_ESP32
diff --git a/components/driver/spi_master.c b/components/driver/spi_master.c
index 0a7cac3523..ef57550c85 100644
--- a/components/driver/spi_master.c
+++ b/components/driver/spi_master.c
@@ -605,10 +605,13 @@ static void SPI_MASTER_ISR_ATTR spi_intr(void *arg)
         //Okay, transaction is done.
         const int cs = host->cur_cs;
         //Tell common code DMA workaround that our DMA channel is idle. If needed, the code will do a DMA reset.
+
+#if CONFIG_IDF_TARGET_ESP32
         if (bus_attr->dma_enabled) {
             //This workaround is only for esp32, where tx_dma_chan and rx_dma_chan are always same
             spicommon_dmaworkaround_idle(bus_attr->tx_dma_chan);
         }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
         //cur_cs is changed to DEV_NUM_MAX here
         spi_post_trans(host);
@@ -660,11 +663,13 @@ static void SPI_MASTER_ISR_ATTR spi_intr(void *arg)
 
         if (trans_found) {
             spi_trans_priv_t *const cur_trans_buf = &host->cur_trans_buf;
+#if CONFIG_IDF_TARGET_ESP32
             if (bus_attr->dma_enabled && (cur_trans_buf->buffer_to_rcv || cur_trans_buf->buffer_to_send)) {
                 //mark channel as active, so that the DMA will not be reset by the slave
                 //This workaround is only for esp32, where tx_dma_chan and rx_dma_chan are always same
                 spicommon_dmaworkaround_transfer_active(bus_attr->tx_dma_chan);
             }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
             spi_new_trans(device_to_send, cur_trans_buf);
         }
         // Exit of the ISR, handle interrupt re-enable (if sending transaction), retry (if there's coming BG),
@@ -893,10 +898,14 @@ esp_err_t SPI_MASTER_ISR_ATTR spi_device_acquire_bus(spi_device_t *device, TickT
     //configure the device ahead so that we don't need to do it again in the following transactions
     spi_setup_device(host->device[device->id]);
     //the DMA is also occupied by the device, all the slave devices that using DMA should wait until bus released.
+
+#if CONFIG_IDF_TARGET_ESP32
     if (host->bus_attr->dma_enabled) {
         //This workaround is only for esp32, where tx_dma_chan and rx_dma_chan are always same
         spicommon_dmaworkaround_transfer_active(host->bus_attr->tx_dma_chan);
     }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
+
     return ESP_OK;
 }
 
@@ -910,11 +919,13 @@ void SPI_MASTER_ISR_ATTR spi_device_release_bus(spi_device_t *dev)
         assert(0);
     }
 
+#if CONFIG_IDF_TARGET_ESP32
     if (host->bus_attr->dma_enabled) {
         //This workaround is only for esp32, where tx_dma_chan and rx_dma_chan are always same
         spicommon_dmaworkaround_idle(host->bus_attr->tx_dma_chan);
     }
     //Tell common code DMA workaround that our DMA channel is idle. If needed, the code will do a DMA reset.
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
     //allow clock to be lower than 80MHz when all tasks blocked
 #ifdef CONFIG_PM_ENABLE
diff --git a/components/driver/spi_slave.c b/components/driver/spi_slave.c
index 802c8f065a..bc39ce47f5 100644
--- a/components/driver/spi_slave.c
+++ b/components/driver/spi_slave.c
@@ -320,11 +320,13 @@ esp_err_t SPI_SLAVE_ATTR spi_slave_transmit(spi_host_device_t host, spi_slave_tr
     return ESP_OK;
 }
 
+#if CONFIG_IDF_TARGET_ESP32
 static void SPI_SLAVE_ISR_ATTR spi_slave_restart_after_dmareset(void *arg)
 {
     spi_slave_t *host = (spi_slave_t *)arg;
     esp_intr_enable(host->intr);
 }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
 //This is run in interrupt context and apart from initialization and destruction, this is the only code
 //touching the host (=spihost[x]) variable. The rest of the data arrives in queues. That is why there are
@@ -347,18 +349,25 @@ static void SPI_SLAVE_ISR_ATTR spi_intr(void *arg)
         spi_slave_hal_store_result(hal);
         host->cur_trans->trans_len = spi_slave_hal_get_rcv_bitlen(hal);
 
+#if CONFIG_IDF_TARGET_ESP32
+        //This workaround is only for esp32
         if (spi_slave_hal_dma_need_reset(hal)) {
-            //On ESP32 and ESP32S2, actual_tx_dma_chan and actual_rx_dma_chan are always same
+            //On ESP32, actual_tx_dma_chan and actual_rx_dma_chan are always same
             spicommon_dmaworkaround_req_reset(host->tx_dma_chan, spi_slave_restart_after_dmareset, host);
         }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
+
         if (host->cfg.post_trans_cb) host->cfg.post_trans_cb(host->cur_trans);
         //Okay, transaction is done.
         //Return transaction descriptor.
         xQueueSendFromISR(host->ret_queue, &host->cur_trans, &do_yield);
         host->cur_trans = NULL;
     }
+
+#if CONFIG_IDF_TARGET_ESP32
+    //This workaround is only for esp32
     if (use_dma) {
-        //On ESP32 and ESP32S2, actual_tx_dma_chan and actual_rx_dma_chan are always same
+        //On ESP32, actual_tx_dma_chan and actual_rx_dma_chan are always same
         spicommon_dmaworkaround_idle(host->tx_dma_chan);
         if (spicommon_dmaworkaround_reset_in_progress()) {
             //We need to wait for the reset to complete. Disable int (will be re-enabled on reset callback) and exit isr.
@@ -367,6 +376,7 @@ static void SPI_SLAVE_ISR_ATTR spi_intr(void *arg)
             return;
         }
     }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
     //Disable interrupt before checking to avoid concurrency issue.
     esp_intr_disable(host->intr);
@@ -386,10 +396,13 @@ static void SPI_SLAVE_ISR_ATTR spi_intr(void *arg)
         hal->rx_buffer = trans->rx_buffer;
         hal->tx_buffer = trans->tx_buffer;
 
+#if CONFIG_IDF_TARGET_ESP32
         if (use_dma) {
-            //On ESP32 and ESP32S2, actual_tx_dma_chan and actual_rx_dma_chan are always same
+            //This workaround is only for esp32
+            //On ESP32, actual_tx_dma_chan and actual_rx_dma_chan are always same
             spicommon_dmaworkaround_transfer_active(host->tx_dma_chan);
         }
+#endif  //#if CONFIG_IDF_TARGET_ESP32
 
         spi_slave_hal_prepare_data(hal);
 
diff --git a/components/hal/include/hal/spi_slave_hal.h b/components/hal/include/hal/spi_slave_hal.h
index 3ad5f485f1..9d7ceec37e 100644
--- a/components/hal/include/hal/spi_slave_hal.h
+++ b/components/hal/include/hal/spi_slave_hal.h
@@ -1,16 +1,8 @@
-// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
+/*
+ * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
 
 /*******************************************************************************
  * NOTICE
@@ -150,6 +142,7 @@ void spi_slave_hal_store_result(spi_slave_hal_context_t *hal);
  */
 uint32_t spi_slave_hal_get_rcv_bitlen(spi_slave_hal_context_t *hal);
 
+#if CONFIG_IDF_TARGET_ESP32
 /**
  * Check whether we need to reset the DMA according to the status of last transactions.
  *
@@ -161,3 +154,4 @@ uint32_t spi_slave_hal_get_rcv_bitlen(spi_slave_hal_context_t *hal);
  * @return true if reset is needed, else false.
  */
 bool spi_slave_hal_dma_need_reset(const spi_slave_hal_context_t *hal);
+#endif //#if CONFIG_IDF_TARGET_ESP32
diff --git a/components/hal/spi_slave_hal_iram.c b/components/hal/spi_slave_hal_iram.c
index d3a0e3924e..56288e134f 100644
--- a/components/hal/spi_slave_hal_iram.c
+++ b/components/hal/spi_slave_hal_iram.c
@@ -98,6 +98,8 @@ uint32_t spi_slave_hal_get_rcv_bitlen(spi_slave_hal_context_t *hal)
     return hal->rcv_bitlen;
 }
 
+#if CONFIG_IDF_TARGET_ESP32
+//This workaround is only for esp32
 bool spi_slave_hal_dma_need_reset(const spi_slave_hal_context_t *hal)
 {
     bool ret;
@@ -114,3 +116,4 @@ bool spi_slave_hal_dma_need_reset(const spi_slave_hal_context_t *hal)
     }
     return ret;
 }
+#endif //#if CONFIG_IDF_TARGET_ESP32
diff --git a/tools/ci/check_copyright_ignore.txt b/tools/ci/check_copyright_ignore.txt
index bae401bae0..363adc7b5f 100644
--- a/tools/ci/check_copyright_ignore.txt
+++ b/tools/ci/check_copyright_ignore.txt
@@ -769,7 +769,6 @@ components/hal/include/hal/rtc_io_types.h
 components/hal/include/hal/sdio_slave_ll.h
 components/hal/include/hal/sha_hal.h
 components/hal/include/hal/spi_flash_encrypt_hal.h
-components/hal/include/hal/spi_slave_hal.h
 components/hal/include/hal/spi_slave_hd_hal.h
 components/hal/include/hal/twai_types.h
 components/hal/include/hal/uhci_types.h