Merge branch 'feature/esp32c61_light_sleep_support_stage_3' into 'master'

feat(esp_hw_support): esp32c61 sleep support (Stage 3:  support system peripheral sleep retention)

Closes IDF-10384, IDF-10382, and IDF-11004

See merge request espressif/esp-idf!33298

components/app_update/test_apps/test_app_update/pytest_app_update_ut.py

@@ -24,7 +24,7 @@ def test_app_update(dut: Dut) -> None:
 
 
 @pytest.mark.supported_targets
-# TODO: [ESP32C61] IDF-9245, IDF-9247, IDF-10983
+# TODO: [ESP32C61] IDF-9245, IDF-10983
 @pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='C61 has not supported deep sleep')
 @pytest.mark.generic
 @pytest.mark.parametrize(

components/esp_hw_support/Kconfig

@@ -273,4 +273,13 @@ menu "Hardware Settings"
     config ESP_SPI_BUS_LOCK_FUNCS_IN_IRAM
         bool
         default n
+
+    config ESP_CLK_RC32K_NOT_TO_USE
+        bool
+        default y if IDF_TARGET_ESP32C5 || IDF_TARGET_ESP32C61
+        default n
+        help
+            Due to the poor low-temperature characteristics of
+            RC32K (it cannot operate below -40 degrees Celsius),
+            please avoid using it whenever possible
 endmenu

components/esp_hw_support/lowpower/port/esp32c5/sleep_clock.c

@@ -19,7 +19,7 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
         [0] = { .config = REGDMA_LINK_WRITE_INIT   (REGDMA_PCR_LINK(0), PCR_AHB_FREQ_CONF_REG,  0,               PCR_AHB_DIV_NUM,      1, 0),                                     .owner = ENTRY(0) | ENTRY(1) }, /* Set AHB bus frequency to XTAL frequency */
         [1] = { .config = REGDMA_LINK_WRITE_INIT   (REGDMA_PCR_LINK(1), PCR_BUS_CLK_UPDATE_REG, 1,               PCR_BUS_CLOCK_UPDATE, 1, 0),                                     .owner = ENTRY(0) | ENTRY(1) },
 #if CONFIG_PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
-        [2] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(2), DR_REG_PCR_BASE,        DR_REG_PCR_BASE, 74,                   0, 0, 0xffffffff, 0xffffffff, 0x7f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
+        [2] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(2), DR_REG_PCR_BASE,        DR_REG_PCR_BASE, 75,                   0, 0, 0xffffffff, 0xffffffff, 0x200007f7, 0x0), .owner = ENTRY(0) | ENTRY(1) },
 #endif
     };
     esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);

components/esp_hw_support/lowpower/port/esp32c61/sleep_clock.c

@@ -0,0 +1,91 @@
+/*
+ * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "esp_private/sleep_clock.h"
+#include "soc/pcr_reg.h"
+#include "modem/modem_syscon_reg.h"
+
+static const char *TAG = "sleep_clock";
+
+esp_err_t sleep_clock_system_retention_init(void *arg)
+{
+    const static sleep_retention_entries_config_t pcr_regs_retention[] = {
+        [0] = { .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_PCR_LINK(0),   DR_REG_PCR_BASE, DR_REG_PCR_BASE, 63, 0, 0, 0xfd73ffff, 0xfdffffff, 0xe001, 0x0), .owner = ENTRY(0) | ENTRY(1) },
+    };
+
+    esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
+    ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for system (PCR) retention");
+    ESP_LOGI(TAG, "System Power, Clock and Reset sleep retention initialization");
+    return ESP_OK;
+}
+
+#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE
+esp_err_t sleep_clock_modem_retention_init(void *arg)
+{
+    #define N_REGS_SYSCON() (((MODEM_SYSCON_MEM_CONF_REG - MODEM_SYSCON_TEST_CONF_REG) / 4) + 1)
+
+    const static sleep_retention_entries_config_t modem_regs_retention[] = {
+        [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_MODEMSYSCON_LINK(0), MODEM_SYSCON_TEST_CONF_REG, MODEM_SYSCON_TEST_CONF_REG, N_REGS_SYSCON(), 0, 0), .owner = ENTRY(0) | ENTRY(1) }, /* MODEM SYSCON */
+    };
+
+    esp_err_t err = sleep_retention_entries_create(modem_regs_retention, ARRAY_SIZE(modem_regs_retention), REGDMA_LINK_PRI_MODEM_CLK, SLEEP_RETENTION_MODULE_CLOCK_MODEM);
+    ESP_RETURN_ON_ERROR(err, TAG, "failed to allocate memory for modem (SYSCON) retention, 1 level priority");
+    ESP_LOGI(TAG, "Modem Power, Clock and Reset sleep retention initialization");
+    return ESP_OK;
+}
+#endif
+
+bool clock_domain_pd_allowed(void)
+{
+    const uint32_t inited_modules = sleep_retention_get_inited_modules();
+    const uint32_t created_modules = sleep_retention_get_created_modules();
+    const uint32_t sys_clk_dep_modules = (const uint32_t) (BIT(SLEEP_RETENTION_MODULE_SYS_PERIPH));
+
+    /* The clock and reset of MODEM (WiFi, BLE and 15.4) modules are managed
+     * through MODEM_SYSCON, when one or more MODEMs are initialized, it is
+     * necessary to check the state of CLOCK_MODEM to determine MODEM domain on
+     * or off. The clock and reset of digital peripherals are managed through
+     * PCR, with TOP domain similar to MODEM domain. */
+    uint32_t modem_clk_dep_modules = 0;
+#if SOC_WIFI_SUPPORTED
+    modem_clk_dep_modules |= BIT(SLEEP_RETENTION_MODULE_WIFI_MAC) | BIT(SLEEP_RETENTION_MODULE_WIFI_BB);
+#endif
+#if SOC_BT_SUPPORTED
+    modem_clk_dep_modules |= BIT(SLEEP_RETENTION_MODULE_BLE_MAC) | BIT(SLEEP_RETENTION_MODULE_BT_BB);
+#endif
+#if SOC_IEEE802154_SUPPORTED
+    modem_clk_dep_modules |= BIT(SLEEP_RETENTION_MODULE_802154_MAC) | BIT(SLEEP_RETENTION_MODULE_BT_BB);
+#endif
+
+    uint32_t mask = 0;
+    if (inited_modules & sys_clk_dep_modules) {
+        mask |= BIT(SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
+    }
+    if (inited_modules & modem_clk_dep_modules) {
+#if SOC_WIFI_SUPPORTED || SOC_BT_SUPPORTED || SOC_IEEE802154_SUPPORTED
+        mask |= BIT(SLEEP_RETENTION_MODULE_CLOCK_MODEM);
+#endif
+    }
+    return ((inited_modules & mask) == (created_modules & mask));
+}
+
+ESP_SYSTEM_INIT_FN(sleep_clock_startup_init, SECONDARY, BIT(0), 106)
+{
+    sleep_retention_module_init_param_t init_param = {
+        .cbs       = { .create = { .handle = sleep_clock_system_retention_init, .arg = NULL } },
+        .attribute = SLEEP_RETENTION_MODULE_ATTR_PASSIVE
+    };
+    sleep_retention_module_init(SLEEP_RETENTION_MODULE_CLOCK_SYSTEM, &init_param);
+
+#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE
+    init_param = (sleep_retention_module_init_param_t) {
+        .cbs       = { .create = { .handle = sleep_clock_modem_retention_init, .arg = NULL } },
+        .attribute = SLEEP_RETENTION_MODULE_ATTR_PASSIVE
+    };
+    sleep_retention_module_init(SLEEP_RETENTION_MODULE_CLOCK_MODEM, &init_param);
+#endif
+    return ESP_OK;
+}

components/esp_hw_support/lowpower/port/esp32c61/sleep_mmu.c

@@ -0,0 +1,162 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <stddef.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include "esp_attr.h"
+#include "esp_check.h"
+#include "esp_sleep.h"
+#include "esp_log.h"
+#include "esp_heap_caps.h"
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#include "soc/spi_mem_reg.h"
+#include "esp_private/startup_internal.h"
+
+static const char *TAG = "sleep_mmu";
+
+typedef struct {
+    uint32_t start;
+    uint32_t end;
+} mmu_domain_dev_regs_region_t;
+
+typedef struct {
+    mmu_domain_dev_regs_region_t *region;
+    int region_num;
+    uint32_t *regs_frame;
+} mmu_domain_dev_sleep_frame_t;
+
+/**
+ * Internal structure which holds all requested light sleep mmu retention parameters
+ */
+typedef struct {
+    struct {
+        mmu_domain_dev_sleep_frame_t *mmu_table_frame;
+    } retent;
+} sleep_mmu_retention_t;
+
+static DRAM_ATTR __attribute__((unused)) sleep_mmu_retention_t s_mmu_retention;
+
+static void * mmu_domain_dev_sleep_frame_alloc_and_init(const mmu_domain_dev_regs_region_t *regions, const int region_num)
+{
+    const int region_sz = sizeof(mmu_domain_dev_regs_region_t) * region_num;
+    int regs_frame_sz = 0;
+    for (int num = 0; num < region_num; num++) {
+        regs_frame_sz += regions[num].end - regions[num].start;
+    }
+    void *frame = heap_caps_malloc(sizeof(mmu_domain_dev_sleep_frame_t) + region_sz + regs_frame_sz, MALLOC_CAP_32BIT|MALLOC_CAP_INTERNAL);
+    if (frame) {
+        mmu_domain_dev_regs_region_t *region = (mmu_domain_dev_regs_region_t *)(frame + sizeof(mmu_domain_dev_sleep_frame_t));
+        memcpy(region, regions, region_num * sizeof(mmu_domain_dev_regs_region_t));
+        void *regs_frame = frame + sizeof(mmu_domain_dev_sleep_frame_t) + region_sz;
+        memset(regs_frame, 0, regs_frame_sz);
+        *(mmu_domain_dev_sleep_frame_t *)frame = (mmu_domain_dev_sleep_frame_t) {
+            .region = region,
+            .region_num = region_num,
+            .regs_frame = (uint32_t *)regs_frame
+        };
+    }
+    return frame;
+}
+
+static inline void * mmu_domain_mmu_table_sleep_frame_alloc_and_init(void)
+{
+    #define MMU_TABLE_SIZE (512 * 4)
+    const static mmu_domain_dev_regs_region_t regions[] = {
+        { .start = SPI_MEM_MMU_ITEM_CONTENT_REG(0), .end = SPI_MEM_MMU_ITEM_CONTENT_REG(0) + MMU_TABLE_SIZE}
+    };
+    return mmu_domain_dev_sleep_frame_alloc_and_init(regions, sizeof(regions) / sizeof(regions[0]));
+}
+
+static IRAM_ATTR void mmu_domain_dev_regs_save(mmu_domain_dev_sleep_frame_t *frame)
+{
+    assert(frame);
+    mmu_domain_dev_regs_region_t *region = frame->region;
+    uint32_t *regs_frame = frame->regs_frame;
+
+    int offset = 0;
+    for (int i = 0; i < frame->region_num; i++) {
+        for (uint32_t addr = region[i].start; addr < region[i].end; addr+=4) {
+            REG_WRITE(SPI_MEM_MMU_ITEM_INDEX_REG(0), offset);
+            regs_frame[offset++] = REG_READ(SPI_MEM_MMU_ITEM_CONTENT_REG(0));
+        }
+    }
+}
+
+static IRAM_ATTR void mmu_domain_dev_regs_restore(mmu_domain_dev_sleep_frame_t *frame)
+{
+    assert(frame);
+    mmu_domain_dev_regs_region_t *region = frame->region;
+    uint32_t *regs_frame = frame->regs_frame;
+
+    int offset = 0;
+    for (int i = 0; i < frame->region_num; i++) {
+        for (uint32_t addr = region[i].start; addr < region[i].end; addr+=4) {
+            REG_WRITE(SPI_MEM_MMU_ITEM_INDEX_REG(0), offset);
+            REG_WRITE(SPI_MEM_MMU_ITEM_CONTENT_REG(0),regs_frame[offset++]);
+        }
+    }
+}
+
+IRAM_ATTR void esp_sleep_mmu_retention(bool backup_or_restore)
+{
+    if (backup_or_restore) {
+        mmu_domain_dev_regs_save(s_mmu_retention.retent.mmu_table_frame);
+    } else {
+        mmu_domain_dev_regs_restore(s_mmu_retention.retent.mmu_table_frame);
+    }
+}
+
+static esp_err_t esp_sleep_mmu_retention_deinit_impl(void)
+{
+    if (s_mmu_retention.retent.mmu_table_frame) {
+        heap_caps_free((void *)s_mmu_retention.retent.mmu_table_frame);
+        s_mmu_retention.retent.mmu_table_frame = NULL;
+    }
+    return ESP_OK;
+}
+
+static esp_err_t esp_sleep_mmu_retention_init_impl(void)
+{
+    if (s_mmu_retention.retent.mmu_table_frame == NULL) {
+        void *frame = mmu_domain_mmu_table_sleep_frame_alloc_and_init();
+        if (frame == NULL) {
+            goto err;
+        }
+        s_mmu_retention.retent.mmu_table_frame = (mmu_domain_dev_sleep_frame_t *)frame;
+    }
+    return ESP_OK;
+err:
+    esp_sleep_mmu_retention_deinit();
+    return ESP_ERR_NO_MEM;
+}
+
+esp_err_t esp_sleep_mmu_retention_init(void)
+{
+    return esp_sleep_mmu_retention_init_impl();
+}
+
+esp_err_t esp_sleep_mmu_retention_deinit(void)
+{
+    return esp_sleep_mmu_retention_deinit_impl();
+}
+
+bool mmu_domain_pd_allowed(void)
+{
+    return (s_mmu_retention.retent.mmu_table_frame != NULL);
+}
+
+ESP_SYSTEM_INIT_FN(sleep_mmu_startup_init, SECONDARY, BIT(0), 108)
+{
+    esp_err_t ret;
+    ret = esp_sleep_mmu_retention_init();
+    if (ret != ESP_OK) {
+        ESP_EARLY_LOGW(TAG, "Failed to enable TOP power down during light sleep.");
+    }
+    return ESP_OK;
+}

components/esp_hw_support/modem_clock.c

@@ -423,7 +423,7 @@ void modem_clock_select_lp_clock_source(periph_module_t module, modem_clock_lpcl
     esp_sleep_pd_domain_t pd_domain = (esp_sleep_pd_domain_t) (
               (last_src == MODEM_CLOCK_LPCLK_SRC_RC_FAST)  ? ESP_PD_DOMAIN_RC_FAST  :
               (last_src == MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL) ? ESP_PD_DOMAIN_XTAL    :
-#if !SOC_CLK_RC32K_NOT_TO_USE
+#if !CONFIG_ESP_CLK_RC32K_NOT_TO_USE
               (last_src == MODEM_CLOCK_LPCLK_SRC_RC32K)     ? ESP_PD_DOMAIN_RC32K   :
 #endif
               (last_src == MODEM_CLOCK_LPCLK_SRC_XTAL32K)   ? ESP_PD_DOMAIN_XTAL32K :
@@ -431,7 +431,7 @@ void modem_clock_select_lp_clock_source(periph_module_t module, modem_clock_lpcl
     esp_sleep_pd_domain_t pu_domain = (esp_sleep_pd_domain_t) (
               (src == MODEM_CLOCK_LPCLK_SRC_RC_FAST)  ? ESP_PD_DOMAIN_RC_FAST  :
               (src == MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL) ? ESP_PD_DOMAIN_XTAL    :
-#if !SOC_CLK_RC32K_NOT_TO_USE
+#if !CONFIG_ESP_CLK_RC32K_NOT_TO_USE
               (src == MODEM_CLOCK_LPCLK_SRC_RC32K)     ? ESP_PD_DOMAIN_RC32K   :
 #endif
               (src == MODEM_CLOCK_LPCLK_SRC_XTAL32K)   ? ESP_PD_DOMAIN_XTAL32K :
@@ -486,7 +486,7 @@ void modem_clock_deselect_lp_clock_source(periph_module_t module)
     esp_sleep_pd_domain_t pd_domain = (esp_sleep_pd_domain_t) (
               (last_src == MODEM_CLOCK_LPCLK_SRC_RC_FAST)  ? ESP_PD_DOMAIN_RC_FAST  :
               (last_src == MODEM_CLOCK_LPCLK_SRC_MAIN_XTAL) ? ESP_PD_DOMAIN_XTAL    :
-#if !SOC_CLK_RC32K_NOT_TO_USE
+#if !CONFIG_ESP_CLK_RC32K_NOT_TO_USE
               (last_src == MODEM_CLOCK_LPCLK_SRC_RC32K)     ? ESP_PD_DOMAIN_RC32K   :
 #endif
               (last_src == MODEM_CLOCK_LPCLK_SRC_XTAL32K)   ? ESP_PD_DOMAIN_XTAL32K :

components/esp_hw_support/port/esp32c61/CMakeLists.txt

@@ -17,7 +17,7 @@ if(NOT BOOTLOADER_BUILD)
 
 endif()
 
-# TODO: [ESP32C61] IDF-9250
+# TODO: [ESP32C61] IDF-9304
 if(CONFIG_IDF_TARGET_ESP32C61)
     list(REMOVE_ITEM srcs
         "sar_periph_ctrl.c"

components/esp_hw_support/port/esp32c61/private_include/pmu_bit_defs.h

@@ -10,8 +10,6 @@
 extern "C" {
 #endif
 
-// TODO: IDF-9247
-
 #define PMU_EXT0_WAKEUP_EN          BIT(0)
 #define PMU_EXT1_WAKEUP_EN          BIT(1)
 #define PMU_GPIO_WAKEUP_EN          BIT(2)

components/esp_hw_support/port/esp32c61/private_include/pmu_param.h

@@ -476,12 +476,12 @@ typedef struct pmu_sleep_machine_constant {
         .reset_wait_time_us             = 1,    \
         .power_supply_wait_time_us      = 20,   \
         .power_up_wait_time_us          = 2,    \
-        .regdma_s2m_work_time_us        = 172,  \
+        .regdma_s2m_work_time_us        = 270,  \
-        .regdma_s2a_work_time_us        = 480,  \
+        .regdma_s2a_work_time_us        = 666,  \
-        .regdma_m2a_work_time_us        = 278,  \
+        .regdma_m2a_work_time_us        = 296,  \
-        .regdma_a2s_work_time_us        = 382,  \
+        .regdma_a2s_work_time_us        = 586,  \
-        .regdma_rf_on_work_time_us      = 70,   \
+        .regdma_rf_on_work_time_us      = 138,  \
-        .regdma_rf_off_work_time_us     = 23,   \
+        .regdma_rf_off_work_time_us     = 28,   \
         .xtal_wait_stable_time_us       = 250,  \
         .pll_wait_stable_time_us        = 1     \
     }                                           \

components/esp_hw_support/sleep_modes.c

@@ -157,8 +157,8 @@
 #define DEFAULT_SLEEP_OUT_OVERHEAD_US       (318)
 #define DEFAULT_HARDWARE_OUT_OVERHEAD_US    (56)
 #elif CONFIG_IDF_TARGET_ESP32C61
-#define DEFAULT_SLEEP_OUT_OVERHEAD_US       (318)
+#define DEFAULT_SLEEP_OUT_OVERHEAD_US       (1148) //TODO: PM-231
-#define DEFAULT_HARDWARE_OUT_OVERHEAD_US    (56)
+#define DEFAULT_HARDWARE_OUT_OVERHEAD_US    (107)
 #elif CONFIG_IDF_TARGET_ESP32H2
 #define DEFAULT_SLEEP_OUT_OVERHEAD_US       (118)
 #define DEFAULT_HARDWARE_OUT_OVERHEAD_US    (9)
@@ -189,8 +189,12 @@
 #endif
 
 #if SOC_PM_MMU_TABLE_RETENTION_WHEN_TOP_PD
+#if CONFIG_IDF_TARGET_ESP32C61
+#define SLEEP_MMU_TABLE_RETENTION_OVERHEAD_US  (1232)
+#elif CONFIG_IDF_TARGET_ESP32C5
 #define SLEEP_MMU_TABLE_RETENTION_OVERHEAD_US  (1220)
 #endif
+#endif
 
 // Minimal amount of time we can sleep for
 #define LIGHT_SLEEP_MIN_TIME_US     200
@@ -705,7 +709,7 @@ FORCE_INLINE_ATTR void misc_modules_wake_prepare(uint32_t pd_flags)
 #if SOC_USB_SERIAL_JTAG_SUPPORTED && !SOC_USB_SERIAL_JTAG_SUPPORT_LIGHT_SLEEP
     sleep_console_usj_pad_restore();
 #endif
-#if !CONFIG_IDF_TARGET_ESP32C61
+#if !CONFIG_IDF_TARGET_ESP32C61 // TODO: IDF-9304
     sar_periph_ctrl_power_enable();
 #endif
 #if CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP && SOC_PM_CPU_RETENTION_BY_RTCCNTL
@@ -2359,7 +2363,7 @@ static uint32_t get_power_down_flags(void)
     }
 #endif
 #if SOC_PM_SUPPORT_RC32K_PD
-#if !SOC_CLK_RC32K_NOT_TO_USE
+#if !CONFIG_ESP_CLK_RC32K_NOT_TO_USE
     if (s_config.domain[ESP_PD_DOMAIN_RC32K].pd_option != ESP_PD_OPTION_ON) {
         pd_flags |= PMU_SLEEP_PD_RC32K;
     }

components/esp_system/system_init_fn.txt

@@ -82,10 +82,12 @@ SECONDARY: 103: esp_security_init in components/esp_security/src/init.c on BIT(0
 SECONDARY: 105: esp_sleep_startup_init in components/esp_hw_support/sleep_gpio.c on BIT(0)
 SECONDARY: 106: sleep_clock_startup_init in components/esp_hw_support/lowpower/port/esp32c5/sleep_clock.c on BIT(0)
 SECONDARY: 106: sleep_clock_startup_init in components/esp_hw_support/lowpower/port/esp32c6/sleep_clock.c on BIT(0)
+SECONDARY: 106: sleep_clock_startup_init in components/esp_hw_support/lowpower/port/esp32c61/sleep_clock.c on BIT(0)
 SECONDARY: 106: sleep_clock_startup_init in components/esp_hw_support/lowpower/port/esp32h2/sleep_clock.c on BIT(0)
 SECONDARY: 106: sleep_clock_startup_init in components/esp_hw_support/lowpower/port/esp32p4/sleep_clock.c on BIT(0)
 SECONDARY: 107: sleep_sys_periph_startup_init in components/esp_hw_support/sleep_system_peripheral.c on BIT(0)
 SECONDARY: 108: sleep_mmu_startup_init in components/esp_hw_support/lowpower/port/esp32c5/sleep_mmu.c on BIT(0)
+SECONDARY: 108: sleep_mmu_startup_init in components/esp_hw_support/lowpower/port/esp32c61/sleep_mmu.c on BIT(0)
 
 # app_trace has to be initialized before systemview
 SECONDARY: 115: esp_apptrace_init in components/app_trace/app_trace.c on ESP_SYSTEM_INIT_ALL_CORES

components/hal/esp32c61/include/hal/pau_ll.h

@@ -0,0 +1,172 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+// The LL layer for ESP32-C61 PAU(Power Assist Unit) register operations
+
+#pragma once
+
+#include <stdlib.h>
+#include <stdbool.h>
+#include "soc/soc.h"
+#include "soc/pau_reg.h"
+#include "soc/pau_struct.h"
+#include "soc/pcr_struct.h"
+#include "hal/pau_types.h"
+#include "hal/assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void pau_ll_enable_bus_clock(bool enable)
+{
+    if (enable) {
+        PCR.regdma_conf.regdma_clk_en = 1;
+        PCR.regdma_conf.regdma_rst_en = 0;
+    } else {
+        PCR.regdma_conf.regdma_clk_en = 0;
+        PCR.regdma_conf.regdma_rst_en = 1;
+    }
+}
+
+static inline uint32_t pau_ll_get_regdma_backup_flow_error(pau_dev_t *dev)
+{
+    return dev->regdma_conf.flow_err;
+}
+
+static inline void pau_ll_select_regdma_entry_link(pau_dev_t *dev, int link)
+{
+    dev->regdma_conf.link_sel = link;
+}
+
+static inline void pau_ll_set_regdma_entry_link_backup_direction(pau_dev_t *dev, bool to_mem)
+{
+    dev->regdma_conf.to_mem = to_mem ? 1 : 0;
+}
+
+static inline void pau_ll_set_regdma_entry_link_backup_start_enable(pau_dev_t *dev)
+{
+    dev->regdma_conf.start = 1;
+}
+
+static inline void pau_ll_set_regdma_entry_link_backup_start_disable(pau_dev_t *dev)
+{
+    dev->regdma_conf.start = 0;
+}
+
+static inline void pau_ll_set_regdma_select_wifimac_link(pau_dev_t *dev)
+{
+    dev->regdma_conf.sel_mac = 1;
+}
+
+static inline void pau_ll_set_regdma_deselect_wifimac_link(pau_dev_t *dev)
+{
+    dev->regdma_conf.sel_mac = 0;
+}
+
+static inline void pau_ll_set_regdma_wifimac_link_backup_direction(pau_dev_t *dev, bool to_mem)
+{
+    dev->regdma_conf.to_mem_mac = to_mem ? 1 : 0;
+}
+
+static inline void pau_ll_set_regdma_wifimac_link_backup_start_enable(pau_dev_t *dev)
+{
+    dev->regdma_conf.start_mac = 1;
+}
+
+static inline void pau_ll_set_regdma_wifimac_link_backup_start_disable(pau_dev_t *dev)
+{
+    dev->regdma_conf.start_mac = 0;
+}
+
+static inline void pau_ll_set_regdma_link0_addr(pau_dev_t *dev, void *link_addr)
+{
+    dev->regdma_link_0_addr.val = (uint32_t)link_addr;
+}
+
+static inline void pau_ll_set_regdma_link1_addr(pau_dev_t *dev, void *link_addr)
+{
+    dev->regdma_link_1_addr.val = (uint32_t)link_addr;
+}
+
+static inline void pau_ll_set_regdma_link2_addr(pau_dev_t *dev, void *link_addr)
+{
+    dev->regdma_link_2_addr.val = (uint32_t)link_addr;
+}
+
+static inline void pau_ll_set_regdma_link3_addr(pau_dev_t *dev, void *link_addr)
+{
+    dev->regdma_link_3_addr.val = (uint32_t)link_addr;
+}
+
+static inline void pau_ll_set_regdma_wifimac_link_addr(pau_dev_t *dev, void *link_addr)
+{
+    dev->regdma_link_mac_addr.val = (uint32_t)link_addr;
+}
+
+static inline uint32_t pau_ll_get_regdma_current_link_addr(pau_dev_t *dev)
+{
+    return dev->regdma_current_link_addr.val;
+}
+
+static inline uint32_t pau_ll_get_regdma_backup_addr(pau_dev_t *dev)
+{
+    return dev->regdma_backup_addr.val;
+}
+
+static inline uint32_t pau_ll_get_regdma_memory_addr(pau_dev_t *dev)
+{
+    return dev->regdma_mem_addr.val;
+}
+
+static inline uint32_t pau_ll_get_regdma_intr_raw_signal(pau_dev_t *dev)
+{
+    return dev->int_raw.val;
+}
+
+static inline uint32_t pau_ll_get_regdma_intr_status(pau_dev_t *dev)
+{
+    return dev->int_st.val;
+}
+
+static inline void pau_ll_set_regdma_backup_done_intr_enable(pau_dev_t *dev)
+{
+    dev->int_ena.done_int_ena = 1;
+}
+
+static inline void pau_ll_set_regdma_backup_done_intr_disable(pau_dev_t *dev)
+{
+    dev->int_ena.done_int_ena = 0;
+}
+
+static inline void pau_ll_set_regdma_backup_error_intr_enable(pau_dev_t *dev, bool enable)
+{
+    dev->int_ena.error_int_ena = enable;
+}
+
+static inline void pau_ll_clear_regdma_backup_done_intr_state(pau_dev_t *dev)
+{
+    dev->int_clr.done_int_clr = 1;
+}
+
+static inline void pau_ll_clear_regdma_backup_error_intr_state(pau_dev_t *dev)
+{
+    dev->int_clr.error_int_clr = 1;
+}
+
+static inline void pau_ll_set_regdma_link_wait_retry_count(pau_dev_t *dev, int count)
+{
+    dev->regdma_bkp_conf.link_tout_thres = count;
+}
+
+static inline void pau_ll_set_regdma_link_wait_read_interval(pau_dev_t *dev, int interval)
+{
+    dev->regdma_bkp_conf.read_interval = interval;
+}
+
+#ifdef __cplusplus
+}
+#endif

components/hal/esp32c61/include/hal/timer_ll.h

@@ -24,6 +24,7 @@ extern "C" {
 // Get timer group register base address with giving group number
 #define TIMER_LL_GET_HW(group_id) ((group_id == 0) ? (&TIMERG0) : (&TIMERG1))
 #define TIMER_LL_EVENT_ALARM(timer_id) (1 << (timer_id))
+#define TIMER_LL_SLEEP_RETENTION_MODULE_ID(group_id) ((group_id == 0) ? SLEEP_RETENTION_MODULE_TG0_TIMER: SLEEP_RETENTION_MODULE_TG1_TIMER)
 
 #define TIMER_LL_ETM_TASK_TABLE(group, timer, task)                                        \
     (uint32_t [2][1][GPTIMER_ETM_TASK_MAX]){{{                                             \

components/hal/esp32c61/include/hal/uart_ll.h

@@ -64,6 +64,10 @@ extern "C" {
     ((hw) == &UART1) ? PCR.uart1_##reg_suffix.uart1_##field_suffix : \
     PCR.uart2_##reg_suffix.uart2_##field_suffix)
 
+// UART sleep retention module
+#define UART_LL_SLEEP_RETENTION_MODULE_ID(uart_num) ((uart_num == UART_NUM_0) ? SLEEP_RETENTION_MODULE_UART0 : \
+                                                     (uart_num == UART_NUM_1) ? SLEEP_RETENTION_MODULE_UART1 : -1)
+
 // Define UART interrupts
 typedef enum {
     UART_INTR_RXFIFO_FULL      = (0x1 << 0),

components/hal/esp32c61/pau_hal.c

@@ -4,8 +4,6 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-// The HAL layer for PAU (ESP32-C61 specific part)
-
 #include "soc/soc.h"
 #include "esp_attr.h"
 #include "hal/pau_hal.h"
@@ -59,3 +57,14 @@ void IRAM_ATTR pau_hal_stop_regdma_extra_link(pau_hal_context_t *hal)
     pau_ll_select_regdma_entry_link(hal->dev, 0); /* restore link select to default */
     pau_ll_clear_regdma_backup_done_intr_state(hal->dev);
 }
+
+void pau_hal_set_regdma_work_timeout(pau_hal_context_t *hal, uint32_t loop_num, uint32_t time)
+{
+}
+
+void pau_hal_set_regdma_wait_timeout(pau_hal_context_t *hal, int count, int interval)
+{
+    HAL_ASSERT(count > 0 && interval > 0);
+    pau_ll_set_regdma_link_wait_retry_count(hal->dev, count);
+    pau_ll_set_regdma_link_wait_read_interval(hal->dev, interval);
+}

components/hal/esp32p4/include/hal/pau_ll.h

@@ -4,7 +4,7 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-// The LL layer for ESP32-C6 PAU(Power Assist Unit) register operations
+// The LL layer for ESP32-P4 PAU(Power Assist Unit) register operations
 
 #pragma once
 

components/soc/esp32c5/include/soc/Kconfig.soc_caps.in

@@ -1359,10 +1359,6 @@ config SOC_CLK_LP_FAST_SUPPORT_XTAL
     bool
     default y
 
-config SOC_CLK_RC32K_NOT_TO_USE
-    bool
-    default y
-
 config SOC_RCC_IS_INDEPENDENT
     bool
     default y

components/soc/esp32c5/include/soc/soc_caps.h

@@ -579,7 +579,6 @@
 #define SOC_CLK_XTAL32K_SUPPORTED                 (1)     /*!< Support to connect an external low frequency crystal */
 #define SOC_CLK_OSC_SLOW_SUPPORTED                (1)     /*!< Support to connect an external oscillator, not a crystal */
 #define SOC_CLK_LP_FAST_SUPPORT_XTAL              (1)     /*!< Support XTAL clock as the LP_FAST clock source */
-#define SOC_CLK_RC32K_NOT_TO_USE                  (1)     /*!< Due to the poor low-temperature characteristics of RC32K (it cannot operate below -40 degrees Celsius), please avoid using it whenever possible. */
 #define SOC_RCC_IS_INDEPENDENT                    1       /*!< Reset and Clock Control is independent, thanks to the PCR registers */
 
 /*-------------------------- Temperature Sensor CAPS -------------------------------------*/

components/soc/esp32c61/include/soc/Kconfig.soc_caps.in

@@ -131,6 +131,10 @@ config SOC_REG_I2C_SUPPORTED
     bool
     default y
 
+config SOC_PAU_SUPPORTED
+    bool
+    default y
+
 config SOC_LIGHT_SLEEP_SUPPORTED
     bool
     default y
@@ -671,6 +675,14 @@ config SOC_TIMER_GROUP_SUPPORT_RC_FAST
     bool
     default y
 
+config SOC_TIMER_SUPPORT_SLEEP_RETENTION
+    bool
+    default y
+
+config SOC_MWDT_SUPPORT_SLEEP_RETENTION
+    bool
+    default y
+
 config SOC_EFUSE_DIS_DOWNLOAD_ICACHE
     bool
     default n
@@ -771,6 +783,10 @@ config SOC_UART_SUPPORT_WAKEUP_INT
     bool
     default y
 
+config SOC_UART_SUPPORT_SLEEP_RETENTION
+    bool
+    default y
+
 config SOC_UART_SUPPORT_FSM_TX_WAIT_SEND
     bool
     default y
@@ -827,6 +843,10 @@ config SOC_PM_SUPPORT_VDDSDIO_PD
     bool
     default y
 
+config SOC_PM_SUPPORT_TOP_PD
+    bool
+    default y
+
 config SOC_PM_SUPPORT_HP_AON_PD
     bool
     default y
@@ -849,16 +869,32 @@ config SOC_PM_CPU_RETENTION_BY_SW
 
 config SOC_PM_MODEM_RETENTION_BY_REGDMA
     bool
-    default n
+    default y
 
 config SOC_EXT_MEM_CACHE_TAG_IN_CPU_DOMAIN
     bool
     default y
 
+config SOC_PM_MMU_TABLE_RETENTION_WHEN_TOP_PD
+    bool
+    default y
+
 config SOC_PM_PAU_LINK_NUM
     int
     default 4
 
+config SOC_PM_PAU_REGDMA_LINK_MULTI_ADDR
+    bool
+    default y
+
+config SOC_PM_PAU_REGDMA_LINK_WIFIMAC
+    bool
+    default y
+
+config SOC_PM_PAU_REGDMA_UPDATE_CACHE_BEFORE_WAIT_COMPARE
+    bool
+    default y
+
 config SOC_CLK_RC_FAST_SUPPORT_CALIBRATION
     bool
     default y
@@ -879,10 +915,6 @@ config SOC_CLK_LP_FAST_SUPPORT_XTAL
     bool
     default y
 
-config SOC_CLK_RC32K_NOT_TO_USE
-    bool
-    default y
-
 config SOC_RCC_IS_INDEPENDENT
     bool
     default y

components/soc/esp32c61/include/soc/reg_base.h

@@ -35,7 +35,7 @@
 #define DR_REG_PAU_BASE                         0x60093000
 #define DR_REG_HP_SYSTEM_BASE                   0x60095000
 #define DR_REG_PCR_BASE                         0x60096000
-#define DR_REG_TEE_REG_BASE                     0x60098000
+#define DR_REG_TEE_BASE                         0x60098000
 #define DR_REG_HP_APM_BASE                      0x60099000
 #define DR_REG_MISC_BASE                        0x6009F000
 #define DR_REG_MODEM0_BASE                      0x600A0000
@@ -61,4 +61,3 @@
 #define DR_REG_INTPRI_BASE                      0x600C5000
 #define DR_REG_CACHE_BASE                       0x600C8000
 #define DR_REG_CLINT_M_BASE                     0x20000000
-#define DR_REG_TEE_BASE                         DR_REG_TEE_REG_BASE

components/soc/esp32c61/include/soc/retention_periph_defs.h

@@ -18,23 +18,29 @@ typedef enum periph_retention_module {
     /* clock module, which includes system and modem */
     SLEEP_RETENTION_MODULE_CLOCK_SYSTEM = 1,
     SLEEP_RETENTION_MODULE_CLOCK_MODEM  = 2,
-
-    /* modem module, which includes WiFi, BLE and 802.15.4 */
-    SLEEP_RETENTION_MODULE_WIFI_MAC     = 10,
-    SLEEP_RETENTION_MODULE_WIFI_BB      = 11,
-    SLEEP_RETENTION_MODULE_BLE_MAC      = 12,
-    SLEEP_RETENTION_MODULE_BT_BB        = 13,
-    SLEEP_RETENTION_MODULE_802154_MAC   = 14,
-
     /* digital peripheral module, which includes Interrupt Matrix, HP_SYSTEM,
-     * TEE, APM, UART, Timer Group, IOMUX, SPIMEM, SysTimer, etc.. */
+     * TEE, APM, IOMUX, SPIMEM, SysTimer, etc.. */
-    SLEEP_RETENTION_MODULE_SYS_PERIPH   = 16,
+    SLEEP_RETENTION_MODULE_SYS_PERIPH   = 3,
-
+    /* Timer Group by target */
-    SLEEP_RETENTION_MODULE_GDMA_CH0     = 24,
+    SLEEP_RETENTION_MODULE_TG0_WDT      = 4,
-    SLEEP_RETENTION_MODULE_GDMA_CH1     = 25,
+    SLEEP_RETENTION_MODULE_TG1_WDT      = 5,
-    SLEEP_RETENTION_MODULE_GDMA_CH2     = 26,
+    SLEEP_RETENTION_MODULE_TG0_TIMER    = 6,
-    SLEEP_RETENTION_MODULE_I2C0         = 27,
+    SLEEP_RETENTION_MODULE_TG1_TIMER    = 7,
+    /* GDMA by channel */
+    SLEEP_RETENTION_MODULE_GDMA_CH0     = 8,
+    SLEEP_RETENTION_MODULE_GDMA_CH1     = 9,
+    SLEEP_RETENTION_MODULE_GDMA_CH2     = 10,
+    /* MISC Peripherals */
+    SLEEP_RETENTION_MODULE_I2C0         = 12,
+    SLEEP_RETENTION_MODULE_UART0        = 14,
+    SLEEP_RETENTION_MODULE_UART1        = 15,
 
+    /* Modem module, which includes WiFi, BLE and 802.15.4 */
+    SLEEP_RETENTION_MODULE_WIFI_MAC     = 26,
+    SLEEP_RETENTION_MODULE_WIFI_BB      = 27,
+    SLEEP_RETENTION_MODULE_BLE_MAC      = 28,
+    SLEEP_RETENTION_MODULE_BT_BB        = 29,
+    SLEEP_RETENTION_MODULE_802154_MAC   = 30,
     SLEEP_RETENTION_MODULE_MAX          = 31
 } periph_retention_module_t;
 
@@ -42,26 +48,44 @@ typedef enum periph_retention_module_bitmap {
     /* clock module, which includes system and modem */
     SLEEP_RETENTION_MODULE_BM_CLOCK_SYSTEM = BIT(SLEEP_RETENTION_MODULE_CLOCK_SYSTEM),
     SLEEP_RETENTION_MODULE_BM_CLOCK_MODEM  = BIT(SLEEP_RETENTION_MODULE_CLOCK_MODEM),
-
+    /* digital peripheral module, which includes Interrupt Matrix, HP_SYSTEM,
+     * TEE, APM, IOMUX, SPIMEM, SysTimer, etc.. */
+    SLEEP_RETENTION_MODULE_BM_SYS_PERIPH   = BIT(SLEEP_RETENTION_MODULE_SYS_PERIPH),
+    /* Timer Group by target*/
+    SLEEP_RETENTION_MODULE_BM_TASK_WDT     = BIT(SLEEP_RETENTION_MODULE_TG0_WDT),
+    SLEEP_RETENTION_MODULE_BM_INT_WDT      = BIT(SLEEP_RETENTION_MODULE_TG1_WDT),
+    SLEEP_RETENTION_MODULE_BM_TG0_TIMER    = BIT(SLEEP_RETENTION_MODULE_TG0_TIMER),
+    SLEEP_RETENTION_MODULE_BM_TG1_TIMER    = BIT(SLEEP_RETENTION_MODULE_TG1_TIMER),
+    /* GDMA by channel */
+    SLEEP_RETENTION_MODULE_BM_GDMA_CH0     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH0),
+    SLEEP_RETENTION_MODULE_BM_GDMA_CH1     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH1),
+    SLEEP_RETENTION_MODULE_BM_GDMA_CH2     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH2),
+    /* MISC Peripherals */
+    SLEEP_RETENTION_MODULE_BM_I2C0         = BIT(SLEEP_RETENTION_MODULE_I2C0),
+    SLEEP_RETENTION_MODULE_BM_UART0        = BIT(SLEEP_RETENTION_MODULE_UART0),
+    SLEEP_RETENTION_MODULE_BM_UART1        = BIT(SLEEP_RETENTION_MODULE_UART1),
     /* modem module, which includes WiFi, BLE and 802.15.4 */
     SLEEP_RETENTION_MODULE_BM_WIFI_MAC     = BIT(SLEEP_RETENTION_MODULE_WIFI_MAC),
     SLEEP_RETENTION_MODULE_BM_WIFI_BB      = BIT(SLEEP_RETENTION_MODULE_WIFI_BB),
     SLEEP_RETENTION_MODULE_BM_BLE_MAC      = BIT(SLEEP_RETENTION_MODULE_BLE_MAC),
     SLEEP_RETENTION_MODULE_BM_BT_BB        = BIT(SLEEP_RETENTION_MODULE_BT_BB),
     SLEEP_RETENTION_MODULE_BM_802154_MAC   = BIT(SLEEP_RETENTION_MODULE_802154_MAC),
-
-    /* digital peripheral module, which includes Interrupt Matrix, HP_SYSTEM,
-     * TEE, APM, UART, Timer Group, IOMUX, SPIMEM, SysTimer, etc.. */
-    SLEEP_RETENTION_MODULE_BM_SYS_PERIPH   = BIT(SLEEP_RETENTION_MODULE_SYS_PERIPH),
-
-    SLEEP_RETENTION_MODULE_BM_GDMA_CH0     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH0),
-    SLEEP_RETENTION_MODULE_BM_GDMA_CH1     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH1),
-    SLEEP_RETENTION_MODULE_BM_GDMA_CH2     = BIT(SLEEP_RETENTION_MODULE_GDMA_CH2),
-    SLEEP_RETENTION_MODULE_BM_I2C0         = BIT(SLEEP_RETENTION_MODULE_I2C0),
-
     SLEEP_RETENTION_MODULE_BM_ALL          = (uint32_t)-1
 } periph_retention_module_bitmap_t;
 
+#define TOP_DOMAIN_PERIPHERALS_BM ( SLEEP_RETENTION_MODULE_BM_SYS_PERIPH  \
+                                  | SLEEP_RETENTION_MODULE_BM_TASK_WDT    \
+                                  | SLEEP_RETENTION_MODULE_BM_INT_WDT     \
+                                  | SLEEP_RETENTION_MODULE_BM_TG0_TIMER   \
+                                  | SLEEP_RETENTION_MODULE_BM_TG1_TIMER   \
+                                  | SLEEP_RETENTION_MODULE_BM_GDMA_CH0    \
+                                  | SLEEP_RETENTION_MODULE_BM_GDMA_CH1    \
+                                  | SLEEP_RETENTION_MODULE_BM_GDMA_CH2    \
+                                  | SLEEP_RETENTION_MODULE_BM_I2C0        \
+                                  | SLEEP_RETENTION_MODULE_BM_UART0       \
+                                  | SLEEP_RETENTION_MODULE_BM_UART1       \
+                                  )
+
 #ifdef __cplusplus
 }
 #endif

components/soc/esp32c61/include/soc/soc_caps.h

@@ -59,7 +59,7 @@
 #define SOC_REG_I2C_SUPPORTED           1
 //  \#define SOC_ETM_SUPPORTED               0
 //  \#define SOC_SDIO_SLAVE_SUPPORTED        0
-//  \#define SOC_PAU_SUPPORTED               0
+#define SOC_PAU_SUPPORTED               1
 #define SOC_LIGHT_SLEEP_SUPPORTED       1
 #define SOC_DEEP_SLEEP_SUPPORTED        1
 #define SOC_PM_SUPPORTED                1
@@ -349,10 +349,12 @@
 #define SOC_TIMER_GROUP_COUNTER_BIT_WIDTH (54)
 #define SOC_TIMER_GROUP_SUPPORT_XTAL      (1)
 #define SOC_TIMER_GROUP_SUPPORT_RC_FAST   (1)
+#define SOC_TIMER_SUPPORT_SLEEP_RETENTION (1)
 // #define SOC_TIMER_SUPPORT_ETM             (1)
 
 /*--------------------------- WATCHDOG CAPS ---------------------------------------*/
 // #define SOC_MWDT_SUPPORT_XTAL              (1)
+#define SOC_MWDT_SUPPORT_SLEEP_RETENTION   (1)
 
 /*-------------------------- eFuse CAPS----------------------------*/
 #define SOC_EFUSE_DIS_DOWNLOAD_ICACHE 0
@@ -391,7 +393,7 @@
 #define SOC_UART_SUPPORT_RTC_CLK        (1)         /*!< Support RTC clock as the clock source */
 #define SOC_UART_SUPPORT_XTAL_CLK       (1)         /*!< Support XTAL clock as the clock source */
 #define SOC_UART_SUPPORT_WAKEUP_INT     (1)         /*!< Support UART wakeup interrupt */
-
+#define SOC_UART_SUPPORT_SLEEP_RETENTION   (1)
 // UART has an extra TX_WAIT_SEND state when the FIFO is not empty and XOFF is enabled
 #define SOC_UART_SUPPORT_FSM_TX_WAIT_SEND   (1)
 
@@ -423,7 +425,7 @@
 #define SOC_PM_SUPPORT_RC32K_PD         (1)
 #define SOC_PM_SUPPORT_RC_FAST_PD       (1)
 #define SOC_PM_SUPPORT_VDDSDIO_PD       (1)
-//  \#define SOC_PM_SUPPORT_TOP_PD           (1)
+#define SOC_PM_SUPPORT_TOP_PD           (1)
 #define SOC_PM_SUPPORT_HP_AON_PD        (1)
 #define SOC_PM_SUPPORT_MAC_BB_PD        (1)
 #define SOC_PM_SUPPORT_RTC_PERIPH_PD    (1)
@@ -433,9 +435,15 @@
 #define MAC_SUPPORT_PMU_MODEM_STATE     SOC_PM_SUPPORT_PMU_MODEM_STATE
 
 #define SOC_PM_CPU_RETENTION_BY_SW          (1)
-#define SOC_PM_MODEM_RETENTION_BY_REGDMA    (0)
+#define SOC_PM_MODEM_RETENTION_BY_REGDMA    (1)
 #define SOC_EXT_MEM_CACHE_TAG_IN_CPU_DOMAIN (1)
-#define SOC_PM_PAU_LINK_NUM             (4)
+#define SOC_PM_MMU_TABLE_RETENTION_WHEN_TOP_PD   (1)
+
+#define SOC_PM_PAU_LINK_NUM                 (4)
+#define SOC_PM_PAU_REGDMA_LINK_MULTI_ADDR   (1)
+#define SOC_PM_PAU_REGDMA_LINK_WIFIMAC      (1)
+
+#define SOC_PM_PAU_REGDMA_UPDATE_CACHE_BEFORE_WAIT_COMPARE  (1)
 
 /*-------------------------- CLOCK SUBSYSTEM CAPS ----------------------------------------*/
 #define SOC_CLK_RC_FAST_SUPPORT_CALIBRATION       (1)
@@ -444,7 +452,6 @@
 #define SOC_CLK_XTAL32K_SUPPORTED                 (1)     /*!< Support to connect an external low frequency crystal */
 #define SOC_CLK_OSC_SLOW_SUPPORTED                (1)     /*!< Support to connect an external oscillator, not a crystal */
 #define SOC_CLK_LP_FAST_SUPPORT_XTAL              (1)     /*!< Support XTAL clock as the LP_FAST clock source */
-#define SOC_CLK_RC32K_NOT_TO_USE                  (1)     /*!< Due to the poor low-temperature characteristics of RC32K (it cannot operate below -40 degrees Celsius), please avoid using it whenever possible. */
 #define SOC_RCC_IS_INDEPENDENT                    1       /*!< Reset and Clock Control is independent, thanks to the PCR registers */
 
 /*-------------------------- Temperature Sensor CAPS -------------------------------------*/

components/soc/esp32c61/include/soc/system_periph_retention.h

@@ -0,0 +1,82 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+#include "soc/regdma.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/**
+ * @brief Provide access to interrupt matrix configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define INT_MTX_RETENTION_LINK_LEN   1
+extern const regdma_entries_config_t intr_matrix_regs_retention[INT_MTX_RETENTION_LINK_LEN];
+
+/**
+ * @brief Provide access to hp_system configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define HP_SYSTEM_RETENTION_LINK_LEN 1
+extern const regdma_entries_config_t hp_system_regs_retention[HP_SYSTEM_RETENTION_LINK_LEN];
+
+/**
+ * @brief Provide access to TEE_APM configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define TEE_APM_RETENTION_LINK_LEN   2
+extern const regdma_entries_config_t tee_apm_regs_retention[TEE_APM_RETENTION_LINK_LEN];
+#define TEE_APM_HIGH_PRI_RETENTION_LINK_LEN   1
+extern const regdma_entries_config_t tee_apm_highpri_regs_retention[TEE_APM_HIGH_PRI_RETENTION_LINK_LEN];
+
+/**
+ * @brief Provide access to IOMUX configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define IOMUX_RETENTION_LINK_LEN    7
+extern const regdma_entries_config_t iomux_regs_retention[IOMUX_RETENTION_LINK_LEN];
+
+/**
+ * @brief Provide access to spimem configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define SPIMEM_RETENTION_LINK_LEN   8
+extern const regdma_entries_config_t flash_spimem_regs_retention[SPIMEM_RETENTION_LINK_LEN];
+
+/**
+ * @brief Provide access to systimer configuration registers retention
+ * context definition.
+ *
+ * This is an internal function of the sleep retention driver, and is not
+ * useful for external use.
+ */
+#define SYSTIMER_RETENTION_LINK_LEN   19
+extern const regdma_entries_config_t systimer_regs_retention[SYSTIMER_RETENTION_LINK_LEN];
+
+#ifdef __cplusplus
+}
+#endif

components/soc/esp32c61/include/soc/tee_reg.h

@@ -769,9 +769,9 @@ extern "C" {
  *  Version control register
  */
 #define TEE_DATE    0x0FFFFFFFU
-#define TEE_DATE_REG_M  (TEE_DATE_REG_V << TEE_DATE_REG_S)
+#define TEE_DATE_M  (TEE_DATE_REG_V << TEE_DATE_REG_S)
-#define TEE_DATE_REG_V  0x0FFFFFFFU
+#define TEE_DATE_V  0x0FFFFFFFU
-#define TEE_DATE_REG_S  0
+#define TEE_DATE_S  0
 
 #ifdef __cplusplus
 }

components/soc/esp32c61/system_retention_periph.c

@@ -0,0 +1,121 @@
+/*
+ * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "soc/regdma.h"
+#include "soc/system_periph_retention.h"
+#include "soc/timer_periph.h"
+#include "soc/uart_reg.h"
+#include "soc/systimer_reg.h"
+#include "soc/timer_group_reg.h"
+#include "soc/spi_mem_reg.h"
+#include "soc/hp_system_reg.h"
+#include "soc/tee_reg.h"
+#include "soc/hp_apm_reg.h"
+#include "soc/gpio_reg.h"
+#include "soc/io_mux_reg.h"
+#include "soc/interrupt_matrix_reg.h"
+
+/* Interrupt Matrix Registers Context */
+#define N_REGS_INTR_MATRIX()    (((INTERRUPT_CORE0_CLOCK_GATE_REG - DR_REG_INTERRUPT_CORE0_BASE) / 4) + 1)
+const regdma_entries_config_t intr_matrix_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_INTMTX_LINK(0), DR_REG_INTERRUPT_CORE0_BASE, DR_REG_INTERRUPT_CORE0_BASE, N_REGS_INTR_MATRIX(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }  /* intr matrix */
+};
+_Static_assert(ARRAY_SIZE(intr_matrix_regs_retention) == INT_MTX_RETENTION_LINK_LEN, "Inconsistent INT_MTX retention link length definitions");
+
+/* HP System Registers Context */
+#define N_REGS_HP_SYSTEM()      (((HP_SYSTEM_CLOCK_GATE_REG - DR_REG_HP_SYSTEM_BASE) / 4) + 1)
+const regdma_entries_config_t hp_system_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_HPSYS_LINK(0), DR_REG_HP_SYSTEM_BASE, DR_REG_HP_SYSTEM_BASE, N_REGS_HP_SYSTEM(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }  /* hp system */
+};
+_Static_assert(ARRAY_SIZE(hp_system_regs_retention) == HP_SYSTEM_RETENTION_LINK_LEN, "Inconsistent HP_SYSTEM retention link length definitions");
+
+/* TEE/APM Registers Context */
+#define N_REGS_TEE()    (((TEE_CLOCK_GATE_REG - DR_REG_TEE_BASE) / 4) + 1)
+#define N_REGS_APM()    (((HP_APM_CLOCK_GATE_REG - DR_REG_HP_APM_BASE) / 4) + 1)
+const regdma_entries_config_t tee_apm_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TEEAPM_LINK(0), DR_REG_HP_APM_BASE, DR_REG_HP_APM_BASE, N_REGS_APM(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* apm */
+    [1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TEEAPM_LINK(1), DR_REG_TEE_BASE,    DR_REG_TEE_BASE,    N_REGS_TEE(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }  /* tee */
+};
+const regdma_entries_config_t tee_apm_highpri_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_WRITE_INIT(REGDMA_TEEAPM_LINK(2), TEE_M4_MODE_CTRL_REG, 0x0, 0xffffffff, 1, 0), .owner = ENTRY(2) }
+};
+_Static_assert((ARRAY_SIZE(tee_apm_regs_retention) == TEE_APM_RETENTION_LINK_LEN) && (ARRAY_SIZE(tee_apm_highpri_regs_retention) == TEE_APM_HIGH_PRI_RETENTION_LINK_LEN), "Inconsistent TEE_APM retention link length definitions");
+
+/* IO MUX Registers Context */
+#define N_REGS_IOMUX_0()    (((PERIPHS_IO_MUX_U_PAD_SPID - REG_IO_MUX_BASE) / 4) + 1)
+#define N_REGS_IOMUX_1()    (((GPIO_FUNC21_OUT_SEL_CFG_REG - GPIO_FUNC0_OUT_SEL_CFG_REG) / 4) + 1)
+#define N_REGS_IOMUX_2()    (((GPIO_FUNC121_IN_SEL_CFG_REG - GPIO_FUNC0_IN_SEL_CFG_REG) / 4) + 1)
+#define N_REGS_IOMUX_3()    (((GPIO_PIN21_REG - GPIO_PIN0_REG) / 4) + 1)
+#define N_REGS_IOMUX_4()    (1)
+#define N_REGS_IOMUX_5()    (1)
+#define N_REGS_IOMUX_6()    (1)
+
+const regdma_entries_config_t iomux_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x00), REG_IO_MUX_BASE,            REG_IO_MUX_BASE,            N_REGS_IOMUX_0(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* io_mux */
+    [1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x01), GPIO_FUNC0_OUT_SEL_CFG_REG, GPIO_FUNC0_OUT_SEL_CFG_REG, N_REGS_IOMUX_1(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [2] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x02), GPIO_FUNC0_IN_SEL_CFG_REG,  GPIO_FUNC0_IN_SEL_CFG_REG,  N_REGS_IOMUX_2(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [3] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x03), GPIO_PIN0_REG,              GPIO_PIN0_REG,              N_REGS_IOMUX_3(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [4] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x04), GPIO_STATUS_REG,            GPIO_STATUS_REG,            N_REGS_IOMUX_4(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [5] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x05), GPIO_ENABLE_REG,            GPIO_ENABLE_REG,            N_REGS_IOMUX_5(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [6] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_IOMUX_LINK(0x06), GPIO_OUT_REG,               GPIO_OUT_REG,               N_REGS_IOMUX_6(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }
+};
+_Static_assert(ARRAY_SIZE(iomux_regs_retention) == IOMUX_RETENTION_LINK_LEN, "Inconsistent IOMUX retention link length definitions");
+
+/* Memory SPI Registers Context */
+#define N_REGS_SPI1_MEM_0()     (((SPI_SMEM_DDR_REG(1) - REG_SPI_MEM_BASE(1)) / 4) + 1)
+#define N_REGS_SPI1_MEM_1()     (1)
+#define N_REGS_SPI1_MEM_2()     (1)
+#define N_REGS_SPI0_MEM_0()     (((SPI_SMEM_DDR_REG(0) - REG_SPI_MEM_BASE(0)) / 4) + 1)
+#define N_REGS_SPI0_MEM_1()     (((SPI_SMEM_AC_REG(0)  - SPI_FMEM_PMS0_ATTR_REG(0)) / 4) + 1)
+#define N_REGS_SPI0_MEM_2()     (1)
+#define N_REGS_SPI0_MEM_3()     (((SPI_MEM_XTS_PSEUDO_ROUND_CONF_REG(0) - SPI_MEM_MMU_POWER_CTRL_REG(0)) / 4) + 1)
+const regdma_entries_config_t flash_spimem_regs_retention[] = {
+    /* Note: SPI mem should not to write mmu SPI_MEM_MMU_ITEM_CONTENT_REG and SPI_MEM_MMU_ITEM_INDEX_REG */
+    [0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x00), REG_SPI_MEM_BASE(1),               REG_SPI_MEM_BASE(1),               N_REGS_SPI1_MEM_0(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* spi1_mem */
+    [1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x01), SPI_MEM_TIMING_CALI_REG(1),        SPI_MEM_TIMING_CALI_REG(1),        N_REGS_SPI1_MEM_1(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [2] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x02), SPI_MEM_CLOCK_GATE_REG(1),         SPI_MEM_CLOCK_GATE_REG(1),         N_REGS_SPI1_MEM_2(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    /* Note: SPI mem should not to write mmu SPI_MEM_MMU_ITEM_CONTENT_REG and SPI_MEM_MMU_ITEM_INDEX_REG */
+    [3] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x03), REG_SPI_MEM_BASE(0),               REG_SPI_MEM_BASE(0),               N_REGS_SPI0_MEM_0(), 0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* spi0_mem */
+    [4] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x04), SPI_FMEM_PMS0_ATTR_REG(0),         SPI_FMEM_PMS0_ATTR_REG(0), N_REGS_SPI0_MEM_1(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [5] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x05), SPI_MEM_CLOCK_GATE_REG(0),         SPI_MEM_CLOCK_GATE_REG(0),         N_REGS_SPI0_MEM_2(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [6] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SPIMEM_LINK(0x06), SPI_MEM_MMU_POWER_CTRL_REG(0),     SPI_MEM_MMU_POWER_CTRL_REG(0),     N_REGS_SPI0_MEM_3(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    /* Note: spimem register should set update reg to make the configuration take effect */
+    [7] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SPIMEM_LINK(0x07), SPI_MEM_TIMING_CALI_REG(0),        SPI_MEM_TIMING_CALI_UPDATE,        SPI_MEM_TIMING_CALI_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) }
+};
+_Static_assert(ARRAY_SIZE(flash_spimem_regs_retention) == SPIMEM_RETENTION_LINK_LEN, "Inconsistent SPI Mem retention link length definitions");
+
+/* Systimer Registers Context */
+#define N_REGS_SYSTIMER_0()     (((SYSTIMER_TARGET2_CONF_REG - SYSTIMER_TARGET0_HI_REG) / 4) + 1)
+const regdma_entries_config_t systimer_regs_retention[] = {
+    [0]  = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x00), SYSTIMER_UNIT0_OP_REG,       SYSTIMER_TIMER_UNIT0_UPDATE_M,    SYSTIMER_TIMER_UNIT0_UPDATE_M,    0, 1), .owner = ENTRY(0) | ENTRY(2) }, /* Systimer */
+    [1]  = { .config = REGDMA_LINK_WAIT_INIT      (REGDMA_SYSTIMER_LINK(0x01), SYSTIMER_UNIT0_OP_REG,       SYSTIMER_TIMER_UNIT0_VALUE_VALID, SYSTIMER_TIMER_UNIT0_VALUE_VALID, 0, 1), .owner = ENTRY(0) | ENTRY(2) },
+    [2]  = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SYSTIMER_LINK(0x02), SYSTIMER_UNIT0_VALUE_HI_REG, SYSTIMER_UNIT0_LOAD_HI_REG,       2,                                0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [3]  = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x03), SYSTIMER_UNIT0_LOAD_REG,     SYSTIMER_TIMER_UNIT0_LOAD_M,      SYSTIMER_TIMER_UNIT0_LOAD_M,      1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [4]  = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x04), SYSTIMER_UNIT1_OP_REG,       SYSTIMER_TIMER_UNIT1_UPDATE_M,    SYSTIMER_TIMER_UNIT1_UPDATE_M,    0, 1), .owner = ENTRY(0) | ENTRY(2) },
+    [5]  = { .config = REGDMA_LINK_WAIT_INIT      (REGDMA_SYSTIMER_LINK(0x05), SYSTIMER_UNIT1_OP_REG,       SYSTIMER_TIMER_UNIT1_VALUE_VALID, SYSTIMER_TIMER_UNIT1_VALUE_VALID, 0, 1), .owner = ENTRY(0) | ENTRY(2) },
+    [6]  = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SYSTIMER_LINK(0x06), SYSTIMER_UNIT1_VALUE_HI_REG, SYSTIMER_UNIT1_LOAD_HI_REG,       2,                                0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [7]  = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x07), SYSTIMER_UNIT1_LOAD_REG,     SYSTIMER_TIMER_UNIT1_LOAD_M,      SYSTIMER_TIMER_UNIT1_LOAD_M,      1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [8]  = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SYSTIMER_LINK(0x08), SYSTIMER_TARGET0_HI_REG,     SYSTIMER_TARGET0_HI_REG,          N_REGS_SYSTIMER_0(),              0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* Systimer target value & period */
+
+    [9]  = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x09), SYSTIMER_COMP0_LOAD_REG,     SYSTIMER_TIMER_COMP0_LOAD,        SYSTIMER_TIMER_COMP0_LOAD,        1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [10] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0a), SYSTIMER_COMP1_LOAD_REG,     SYSTIMER_TIMER_COMP1_LOAD,        SYSTIMER_TIMER_COMP1_LOAD,        1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [11] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0b), SYSTIMER_COMP2_LOAD_REG,     SYSTIMER_TIMER_COMP2_LOAD,        SYSTIMER_TIMER_COMP2_LOAD,        1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [12] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0c), SYSTIMER_TARGET0_CONF_REG,   0,                                SYSTIMER_TARGET0_PERIOD_MODE_M,   1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [13] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0d), SYSTIMER_TARGET0_CONF_REG,   SYSTIMER_TARGET0_PERIOD_MODE_M,   SYSTIMER_TARGET0_PERIOD_MODE_M,   1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [14] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0e), SYSTIMER_TARGET1_CONF_REG,   0,                                SYSTIMER_TARGET1_PERIOD_MODE_M,   1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [15] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x0f), SYSTIMER_TARGET1_CONF_REG,   SYSTIMER_TARGET1_PERIOD_MODE_M,   SYSTIMER_TARGET1_PERIOD_MODE_M,   1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [16] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_SYSTIMER_LINK(0x10), SYSTIMER_TARGET2_CONF_REG,   0,                                SYSTIMER_TARGET2_PERIOD_MODE_M,   1, 0), .owner = ENTRY(0) | ENTRY(2) },
+
+    [17] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SYSTIMER_LINK(0x11), SYSTIMER_CONF_REG,           SYSTIMER_CONF_REG,                1,                                0, 0), .owner = ENTRY(0) | ENTRY(2) }, /* Systimer work enable */
+    [18] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_SYSTIMER_LINK(0x12), SYSTIMER_INT_ENA_REG,        SYSTIMER_INT_ENA_REG,             1,                                0, 0), .owner = ENTRY(0) | ENTRY(2) }  /* Systimer intr enable */
+};
+_Static_assert(ARRAY_SIZE(systimer_regs_retention) == SYSTIMER_RETENTION_LINK_LEN, "Inconsistent Systimer retention link length definitions");

components/soc/esp32c61/timer_periph.c

@@ -22,3 +22,112 @@ const timer_group_signal_conn_t timer_group_periph_signals = {
         }
     }
 };
+
+/*  Registers in retention context:
+ *      TIMG_T0CONFIG_REG
+ *      TIMG_T0ALARMLO_REG
+ *      TIMG_T0ALARMHI_REG
+ *      TIMG_T0LOADLO_REG
+ *      TIMG_T0LOADHI_REG
+ *      TIMG_INT_ENA_TIMERS_REG
+ *      TIMG_REGCLK_REG
+ */
+#define TG_TIMER_RETENTION_REGS_CNT 7
+static const uint32_t tg_timer_regs_map[4] = {0x100000f1, 0x80000000, 0x0, 0x0};
+
+const regdma_entries_config_t tg0_timer_regdma_entries[] = {
+    // backup stage: trigger a soft capture
+    [0] = {
+        .config = REGDMA_LINK_WRITE_INIT(REGDMA_TG0_TIMER_LINK(0x00),
+        TIMG_T0UPDATE_REG(0), TIMG_T0_UPDATE, TIMG_T0_UPDATE_M, 0, 1),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: wait for the capture done
+    [1] = {
+        .config = REGDMA_LINK_WAIT_INIT(REGDMA_TG0_TIMER_LINK(0x01),
+        TIMG_T0UPDATE_REG(0), 0x0, TIMG_T0_UPDATE_M, 0, 1),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: save the captured counter value
+    // restore stage: store the captured counter value to the loader register
+    [2] = {
+        .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG0_TIMER_LINK(0x02),
+        TIMG_T0LO_REG(0), TIMG_T0LOADLO_REG(0), 2, 0, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    [3] = {
+        .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG0_TIMER_LINK(0x03),
+        TIMG_T0HI_REG(0), TIMG_T0LOADHI_REG(0), 2, 0, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // restore stage: trigger a soft reload, so the timer can continue from where it was backed up
+    [4] = {
+        .config = REGDMA_LINK_WRITE_INIT(REGDMA_TG0_TIMER_LINK(0x04),
+        TIMG_T0LOAD_REG(0), 0x1, TIMG_T0_LOAD_M, 1, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: save other configuration and status registers
+    // restore stage: restore the configuration and status registers
+    [5] = {
+        .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_TG0_TIMER_LINK(0x05),
+        TIMG_T0CONFIG_REG(0), TIMG_T0CONFIG_REG(0),
+        TG_TIMER_RETENTION_REGS_CNT, 0, 0,
+        tg_timer_regs_map[0], tg_timer_regs_map[1],
+        tg_timer_regs_map[2], tg_timer_regs_map[3]),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+};
+
+const regdma_entries_config_t tg1_timer_regdma_entries[] = {
+    // backup stage: trigger a soft capture
+    [0] = {
+        .config = REGDMA_LINK_WRITE_INIT(REGDMA_TG1_TIMER_LINK(0x00),
+        TIMG_T0UPDATE_REG(1), TIMG_T0_UPDATE, TIMG_T0_UPDATE_M, 0, 1),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: wait for the capture done
+    [1] = {
+        .config = REGDMA_LINK_WAIT_INIT(REGDMA_TG1_TIMER_LINK(0x01),
+        TIMG_T0UPDATE_REG(1), 0x0, TIMG_T0_UPDATE_M, 0, 1),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: save the captured counter value
+    // restore stage: store the captured counter value to the loader register
+    [2] = {
+        .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG1_TIMER_LINK(0x02),
+        TIMG_T0LO_REG(1), TIMG_T0LOADLO_REG(1), 2, 0, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    [3] = {
+        .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG1_TIMER_LINK(0x03),
+        TIMG_T0HI_REG(1), TIMG_T0LOADHI_REG(1), 2, 0, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // restore stage: trigger a soft reload, so the timer can continue from where it was backed up
+    [4] = {
+        .config = REGDMA_LINK_WRITE_INIT(REGDMA_TG1_TIMER_LINK(0x04),
+        TIMG_T0LOAD_REG(1), 0x1, TIMG_T0_LOAD_M, 1, 0),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+    // backup stage: save other configuration and status registers
+    // restore stage: restore the configuration and status registers
+    [5] = {
+        .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_TG1_TIMER_LINK(0x05),
+        TIMG_T0CONFIG_REG(1), TIMG_T0CONFIG_REG(1),
+        TG_TIMER_RETENTION_REGS_CNT, 0, 0,
+        tg_timer_regs_map[0], tg_timer_regs_map[1],
+        tg_timer_regs_map[2], tg_timer_regs_map[3]),
+        .owner = TIMG_RETENTION_ENTRY
+    },
+};
+
+const tg_timer_reg_retention_info_t tg_timer_reg_retention_info[SOC_TIMER_GROUPS] = {
+    [0] = {
+        .regdma_entry_array = tg0_timer_regdma_entries,
+        .array_size = ARRAY_SIZE(tg0_timer_regdma_entries)
+    },
+    [1] = {
+        .regdma_entry_array = tg1_timer_regdma_entries,
+        .array_size = ARRAY_SIZE(tg1_timer_regdma_entries)
+    },
+};

components/soc/esp32c61/uart_periph.c

@@ -5,6 +5,7 @@
  */
 
 #include "soc/uart_periph.h"
+#include "soc/uart_reg.h"
 
 /*
  Bunch of constants for every UART peripheral: GPIO signals, irqs, hw addr of registers etc
@@ -108,3 +109,52 @@ const uart_signal_conn_t uart_periph_signal[SOC_UART_NUM] = {
         .irq = ETS_UART2_INTR_SOURCE,
     },
 };
+
+/**
+ * UART registers to be saved during sleep retention
+ *
+ * Reset TXFIFO and RXFIFO
+ * UART registers require set the reg_update bit to make the configuration take effect
+ *
+ * UART_INT_ENA_REG, UART_CLKDIV_SYNC_REG, UART_RX_FILT_REG, UART_CONF0_SYNC_REG, UART_CONF1_REG,
+ * UART_HWFC_CONF_SYNC_REG, UART_SLEEP_CONF0_REG, UART_SLEEP_CONF1_REG, UART_SLEEP_CONF2_REG,
+ * UART_SWFC_CONF0_SYNC_REG, UART_SWFC_CONF1_REG, UART_TXBRK_CONF_SYNC_REG, UART_IDLE_CONF_SYNC_REG,
+ * UART_RS485_CONF_SYNC_REG, UART_AT_CMD_PRECNT_SYNC_REG, UART_AT_CMD_POSTCNT_SYNC_REG, UART_AT_CMD_GAPTOUT_SYNC_REG,
+ * UART_AT_CMD_CHAR_SYNC_REG, UART_MEM_CONF_REG, UART_TOUT_CONF_SYNC_REG, UART_ID_REG
+ */
+#define UART_RETENTION_ADDR_MAP_REGS_CNT 21
+#define UART_RETENTION_REGS_BASE(i) UART_INT_ENA_REG(i)
+static const uint32_t uart_regs_map[4] = {0x7fff6d, 0x10, 0x0, 0x0};
+#define UART_SLEEP_RETENTION_ENTRIES(uart_num) { \
+    [0] = {.config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_UART_LINK(0x00), \
+                                               UART_RETENTION_REGS_BASE(uart_num), UART_RETENTION_REGS_BASE(uart_num), \
+                                               UART_RETENTION_ADDR_MAP_REGS_CNT, 0, 0, \
+                                               uart_regs_map[0], uart_regs_map[1], \
+                                               uart_regs_map[2], uart_regs_map[3] \
+                                              ), \
+           .owner = ENTRY(0) | ENTRY(2) }, \
+    [1] = {.config = REGDMA_LINK_WRITE_INIT(REGDMA_UART_LINK(0x01), \
+                                            UART_REG_UPDATE_REG(uart_num), UART_REG_UPDATE, \
+                                            UART_REG_UPDATE_M, 1, 0 \
+                                           ), \
+           .owner = ENTRY(0) | ENTRY(2) }, \
+    [2] = {.config = REGDMA_LINK_WAIT_INIT(REGDMA_UART_LINK(0x02), \
+                                           UART_REG_UPDATE_REG(uart_num), 0x0, \
+                                           UART_REG_UPDATE_M, 1, 0 \
+                                          ), \
+           .owner = ENTRY(0) | ENTRY(2) }, \
+}
+
+static const regdma_entries_config_t uart0_regdma_entries[] = UART_SLEEP_RETENTION_ENTRIES(0);
+static const regdma_entries_config_t uart1_regdma_entries[] = UART_SLEEP_RETENTION_ENTRIES(1);
+
+const uart_reg_retention_info_t uart_reg_retention_info[SOC_UART_HP_NUM] = {
+    [0] = {
+        .regdma_entry_array = uart0_regdma_entries,
+        .array_size = ARRAY_SIZE(uart0_regdma_entries),
+    },
+    [1] = {
+        .regdma_entry_array = uart1_regdma_entries,
+        .array_size = ARRAY_SIZE(uart1_regdma_entries),
+    },
+};

components/soc/esp32c61/wdt_periph.c

@@ -5,3 +5,28 @@
  */
 
 #include "soc/wdt_periph.h"
+
+#define N_REGS_TGWDT          6 // TIMG_WDTCONFIG0_REG ... TIMG_WDTCONFIG5_REG & TIMG_INT_ENA_TIMERS_REG
+
+static const regdma_entries_config_t tg0_wdt_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG0_WDT_LINK(0x00), TIMG_WDTWPROTECT_REG(0),   TIMG_WDT_WKEY_VALUE,     TIMG_WDT_WKEY_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG0_WDT_LINK(0x01), TIMG_WDTCONFIG0_REG(0),    TIMG_WDTCONFIG0_REG(0),  N_REGS_TGWDT,              0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [2] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG0_WDT_LINK(0x02), TIMG_WDTCONFIG0_REG(0),    TIMG_WDT_CONF_UPDATE_EN, TIMG_WDT_CONF_UPDATE_EN_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [3] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG0_WDT_LINK(0x03), TIMG_WDTFEED_REG(0),       TIMG_WDT_FEED,           TIMG_WDT_FEED_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [4] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG0_WDT_LINK(0x04), TIMG_INT_ENA_TIMERS_REG(0),TIMG_INT_ENA_TIMERS_REG(0), 1,                      0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [5] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG0_WDT_LINK(0x05), TIMG_WDTWPROTECT_REG(0),   0,                       TIMG_WDT_WKEY_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+};
+
+static const regdma_entries_config_t tg1_wdt_regs_retention[] = {
+    [0] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG1_WDT_LINK(0x00), TIMG_WDTWPROTECT_REG(1),   TIMG_WDT_WKEY_VALUE,     TIMG_WDT_WKEY_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG1_WDT_LINK(0x01), TIMG_INT_ENA_TIMERS_REG(1),TIMG_INT_ENA_TIMERS_REG(1), 1,                      0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [2] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_TG1_WDT_LINK(0x02), TIMG_WDTCONFIG0_REG(1),    TIMG_WDTCONFIG0_REG(1),  N_REGS_TGWDT,              0, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [3] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG1_WDT_LINK(0x03), TIMG_WDTCONFIG0_REG(1),    TIMG_WDT_CONF_UPDATE_EN, TIMG_WDT_CONF_UPDATE_EN_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [4] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG0_WDT_LINK(0x04), TIMG_WDTFEED_REG(1),       TIMG_WDT_FEED,           TIMG_WDT_FEED_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+    [5] = { .config = REGDMA_LINK_WRITE_INIT     (REGDMA_TG1_WDT_LINK(0x05), TIMG_WDTWPROTECT_REG(1),   0,                       TIMG_WDT_WKEY_M,           1, 0), .owner = ENTRY(0) | ENTRY(2) },
+};
+
+const tg_reg_ctx_link_t tg_wdt_regs_retention[SOC_TIMER_GROUPS] = {
+    [0] = {tg0_wdt_regs_retention, ARRAY_SIZE(tg0_wdt_regs_retention)},
+    [1] = {tg1_wdt_regs_retention, ARRAY_SIZE(tg1_wdt_regs_retention)},
+};

examples/system/esp_timer/main/esp_timer_example_main.c

@@ -71,7 +71,8 @@ void app_main(void)
     int64_t t2 = esp_timer_get_time();
     ESP_LOGI(TAG, "Woke up from light sleep, time since boot: %lld us", t2);
 
-    assert(llabs((t2 - t1) - 500000) < 1200);
+    // TODO: PM-232
+    assert(((t2 - t1 - 500000) < 1000) && ((t2 - t1 - 500000) > -2000));
 #endif
 
     /* Let the timer run for a little bit more */

examples/system/esp_timer/pytest_esp_timer.py

@@ -81,7 +81,7 @@ def test_esp_timer(dut: Dut) -> None:
         logging.info('Enter sleep: {}, exit sleep: {}, slept: {}'.format(
             sleep_enter_time, sleep_exit_time, sleep_time))
 
-        assert abs(sleep_time - LIGHT_SLEEP_TIME) < 1200
+        assert -2000 < sleep_time - LIGHT_SLEEP_TIME < 1000
 
     for i in range(5, 7):
         match = dut.expect(PERIODIC_TIMER_REGEX, timeout=2)

examples/system/light_sleep/pytest_light_sleep.py

@@ -62,5 +62,6 @@ def test_light_sleep(dut: Dut) -> None:
     logging.info('Went to sleep again')
 
     match = dut.expect(EXIT_SLEEP_REGEX)
-    assert match.group(1).decode('utf8') == 'timer' and int(match.group(3)) >= WAKEUP_INTERVAL_MS - 1 and int(match.group(3)) <= WAKEUP_INTERVAL_MS + 1
+    # TODO: Need to support dynamically change retention overhead for chips which support pmu (PM-232)
+    assert match.group(1).decode('utf8') == 'timer' and int(match.group(3)) >= WAKEUP_INTERVAL_MS - 2 and int(match.group(3)) <= WAKEUP_INTERVAL_MS + 1
     logging.info('Woke up from timer again')

examples/wifi/.build-test-rules.yml

@@ -57,12 +57,22 @@ examples/wifi/itwt:
 examples/wifi/power_save:
   <<: *wifi_depends_default
   disable:
-    - if: (SOC_WIFI_SUPPORTED != 1)
+    - if: SOC_WIFI_SUPPORTED != 1
+    - if: IDF_TARGET in ["esp32c61"]
+      temporary: true
+      reason: PM-234
   disable_test:
     - if: IDF_TARGET == "esp32c61"
       temporary: true
       reason: lack of runners
   depends_components:
+    - esp_wifi
+    - esp_phy
+    - esp_netif
+    - lwip
+    - esp_event
+    - esp_coex
+    - wpa_supplicant
     - esp_driver_uart
 
 examples/wifi/wifi_aware:

examples/wifi/power_save/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
 
 # Wifi Power Save Example