alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

feat(pm): add internal pull-up/downs option for gpio used for deepsleep wakeup

Browse Source
This commit is contained in:
Lou Tianhao 2023-09-19 10:59:57 +08:00
parent 727f7cbb3a
commit 86e5252d63
3 changed files with 17 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
components/esp_hw_support/Kconfig
View File

@ -154,6 +154,13 @@ menu "Hardware Settings"
If you are seeing "flash read err, 1000" message printed to the
console after deep sleep reset, try increasing this value.
config ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS
bool "Allow to enable internal pull-up/downs for the Deep-Sleep wakeup IOs"
default y
help
When using rtc gpio wakeup source during deepsleep without external pull-up/downs, you may want to
make use of the internal ones.
endmenu
menu "ESP_SLEEP_WORKAROUND"

12
components/esp_hw_support/include/esp_sleep.h
View File

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -280,9 +280,13 @@ esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t mask, esp_sleep_ext1_wakeup_mode
* @note This function does not modify pin configuration. The pins are
* configured inside esp_deep_sleep_start, immediately before entering sleep mode.
*
* @note You don't need to care to pull-up or pull-down before using this
* function, because this will be set internally in esp_deep_sleep_start
* based on the wakeup mode. BTW, when you use low level to wake up the
* @note You don't need to worry about pull-up or pull-down resistors before
* using this function because the ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS
* option is enabled by default. It will automatically set pull-up or pull-down
* resistors internally in esp_deep_sleep_start based on the wakeup mode. However,
* when using external pull-up or pull-down resistors, please be sure to disable
* the ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS option, as the combination of internal
* and external resistors may cause interference. BTW, when you use low level to wake up the
* chip, we strongly recommend you to add external resistors (pull-up).
*
* @param gpio_pin_mask Bit mask of GPIO numbers which will cause wakeup. Only GPIOs

2
components/esp_hw_support/sleep_modes.c
View File

@ -1445,6 +1445,7 @@ static void gpio_deep_sleep_wakeup_prepare(void)
if (((1ULL << gpio_idx) & s_config.gpio_wakeup_mask) == 0) {
continue;
}
#if CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS
if (s_config.gpio_trigger_mode & BIT(gpio_idx)) {
ESP_ERROR_CHECK(gpio_pullup_dis(gpio_idx));
ESP_ERROR_CHECK(gpio_pulldown_en(gpio_idx));
@ -1452,6 +1453,7 @@ static void gpio_deep_sleep_wakeup_prepare(void)
ESP_ERROR_CHECK(gpio_pullup_en(gpio_idx));
ESP_ERROR_CHECK(gpio_pulldown_dis(gpio_idx));
}
#endif
ESP_ERROR_CHECK(gpio_hold_en(gpio_idx));
}
// Clear state from previous wakeup