mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
docs: Delete ESP32-S2-Kaluga-Kit related user guide files
This commit is contained in:
shenmengjing
parent
18a8fcd510
commit
823ac69f43
@ -124,7 +124,7 @@ If you have one of {IDF_TARGET_NAME} official development boards listed below, y
|
||||
ESP32-S2-Saola-1 <../hw-reference/esp32s2/user-guide-saola-1-v1.2>
|
||||
ESP32-S2-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitm-1/index.html>
|
||||
ESP32-S2-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html>
|
||||
ESP32-S2-Kaluga-Kit <../hw-reference/esp32s2/user-guide-esp32-s2-kaluga-1-kit>
|
||||
ESP32-S2-Kaluga-Kit <https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html>
|
||||
|
||||
.. only:: esp32c3
|
||||
|
||||
|
||||
@ -1,116 +0,0 @@
|
||||
==================
|
||||
ESP-LyraP-CAM v1.0
|
||||
==================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraP-CAM extension board.
|
||||
|
||||
This extension board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraP-CAM v1.0 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`.
|
||||
|
||||
The ESP-LyraP-CAM extends the functionality of your main board by adding a camera.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraP-CAM's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraP-CAM.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
This extension board adds a camera to your main board.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM - front and back
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM - front and back
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Main Board Camera Header
|
||||
- Mount onto main board's Camera Header
|
||||
* - Power ON LED
|
||||
- Red LED is on if the power supply voltage is applied
|
||||
* - Camera Module Connector
|
||||
- Supports OV2640 and OV3660 camera modules; this extension board is supplied with an OV2640 camera module
|
||||
* - Power Regulators
|
||||
- LDO Regulators converting 3.3 V to 2.8 V and 1.5 V
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraP-CAM, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Camera Header (e.g., ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-CAM extension board
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Insert the ESP-LyraP-CAM extension board into your board's female Camera Header.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
See Section :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` of the ESP32-S2-Kaluga-1 kit user guide.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of the ESP-LyraP-CAM and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraP-CAM Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.0_SCH_20200302.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-CAM PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.0_PCB_20200302.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,130 +0,0 @@
|
||||
==================
|
||||
ESP-LyraP-CAM v1.1
|
||||
==================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraP-CAM extension board.
|
||||
|
||||
This extension board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraP-CAM v1.1 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit`.
|
||||
|
||||
The ESP-LyraP-CAM extends the functionality of your main board by adding a camera.
|
||||
|
||||
.. Image of v1.0 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraP-CAM's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraP-CAM.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
This extension board adds a camera to your main board.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.1-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM - front and back
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM - front and back
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Main Board Camera Header
|
||||
- Mount onto main board's Camera Header
|
||||
* - Power ON LED
|
||||
- Red LED is on if the power supply voltage is correct
|
||||
* - Camera Module Connector
|
||||
- Supports OV2640 and OV3660 camera modules; this extension board is supplied with an OV2640 camera module
|
||||
* - Power Regulators
|
||||
- LDO Regulators converting 3.3 V to 2.8 V and 1.5 V
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraP-CAM, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Camera Header (e.g., ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-CAM extension board
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Insert the ESP-LyraP-CAM extension board into your board's female Camera Header.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
See Section :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` of the ESP32-S2-Kaluga-1 kit user guide.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of the ESP-LyraP-CAM and their interconnections.
|
||||
|
||||
.. Image of v1.0 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
ESP-LyraP-CAM v1.1
|
||||
------------------
|
||||
|
||||
* Silk screen updated
|
||||
* No actual hardware updates
|
||||
|
||||
|
||||
ESP-LyraP-CAM v1.0
|
||||
------------------
|
||||
|
||||
:doc:`Initial release <user-guide-esp-lyrap-cam-v1.0>`
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraP-CAM Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.1_SCH_20200511A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-CAM PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.1_PCB_20200511AA.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,132 +0,0 @@
|
||||
====================
|
||||
ESP-LyraP-LCD32 v1.1
|
||||
====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraP-LCD32 extension board.
|
||||
|
||||
This extension board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraP-LCD32 v1.1 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`.
|
||||
|
||||
The ESP-LyraP-LCD32 extends the functionality of your main board by adding an LCD graphic display.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-3d.png
|
||||
:align: center
|
||||
:width: 2243px
|
||||
:height: 1534px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraP-LCD32
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 (click to enlarge)
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraP-LCD32's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraP-LCD32.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
This extension board adds a 3.2" LCD graphic display with the resolution of 320x240. This display is connected to ESP32-S2 over the SPI bus.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - front (click to enlarge)
|
||||
|
||||
|
||||
In the description of components below, **Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Extension Header
|
||||
- Male Extension Header for mounting onto a female Extension Header
|
||||
* - LCD display
|
||||
- This version has a 3.2" 320x240 SPI LCD display module; the display driver/controller is Sitronix ST7789V
|
||||
* - Touch Screen Switch
|
||||
- No support for touch screens, keep the switches to OFF to make the pins available for other uses
|
||||
* - Main Board 3.2" LCD FPC Connector
|
||||
- (Reserved) Connect to main board's 3.2" LCD FPC connector
|
||||
* - Control Switch
|
||||
- Switch to ON to set Reset/Backlight_control/CS to default high or low; switch to OFF to make the pins available for other uses
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraP-LCD32, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Extension Header (e.g., ESP32-S2-Kaluga-1, ESP-LyraT-8311A)
|
||||
- ESP-LyraP-LCD32 extension board
|
||||
- Four mounting bolts (for stable mounting)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
To mount your ESP-LyraP-LCD32 onto the board with a female Extension Header:
|
||||
|
||||
1. Install the four mounting bolts onto the board with a female Extension Header
|
||||
2. Align the ESP-LyraP-LCD32 with the bolts and Extension Header and insert it carefully
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
See Section :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` of the ESP32-S2-Kaluga-1 kit user guide.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of the ESP-LyraP-LCD32 and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-LCD32 block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraP-LCD32 Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_1_SCH_20200324A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-LCD32 PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_1_PCB_20200324AC.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,154 +0,0 @@
|
||||
====================
|
||||
ESP-LyraP-LCD32 v1.2
|
||||
====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraP-LCD32 extension board.
|
||||
|
||||
This extension board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraP-LCD32 v1.2 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit`.
|
||||
|
||||
The ESP-LyraP-LCD32 extends the functionality of your main board by adding an LCD graphic display.
|
||||
|
||||
.. Image of v1.1 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-3d.png
|
||||
:align: center
|
||||
:width: 2243px
|
||||
:height: 1534px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraP-LCD32
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 (click to enlarge)
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraP-LCD32's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraP-LCD32.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
This extension board adds a 3.2" LCD graphic display with the resolution of 320x240. This display is connected to ESP32-S2 over the SPI bus.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 489px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - front (click to enlarge)
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-layout-back.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - back
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - back (click to enlarge)
|
||||
|
||||
|
||||
In the description of components below, **Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Extension Header
|
||||
- Male Extension Header for mounting onto a female Extension Header
|
||||
* - LCD Display
|
||||
- This version has a 3.2" 320x240 SPI LCD display module; the display driver/controller is either Sitronix ST7789V or Ilitek ILI9341
|
||||
* - Touch Screen Switch
|
||||
- No support for touch screens, keep the switches to OFF to make the pins available for other uses
|
||||
* - Main Board 3.2" LCD FPC Connector
|
||||
- (Reserved) Connect to main board's 3.2" LCD FPC connector
|
||||
* - Control Switch
|
||||
- Switch to ON to set Reset/Backlight_control/CS to default high or low; switch to OFF to make the pins available for other uses
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraP-LCD32, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Extension Header (e.g., ESP32-S2-Kaluga-1, ESP-LyraT-8311A)
|
||||
- ESP-LyraP-LCD32 extension board
|
||||
- Four mounting bolts (for stable mounting)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
To mount your ESP-LyraP-LCD32 onto the board with a female Extension Header:
|
||||
|
||||
1. Install the four mounting bolts onto the board with a female Extension Header
|
||||
2. Align the ESP-LyraP-LCD32 with the bolts and Extension Header and insert it carefully
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
See Section :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` of the ESP32-S2-Kaluga-1 kit user guide.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of the ESP-LyraP-LCD32 and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-LCD32 block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
ESP-LyraP-LCD32 v1.2
|
||||
--------------------
|
||||
|
||||
* LCD backlight default ON, cannot be controlled by MCU
|
||||
* Touch Driver and related switch removed for major limitations caused by multiplexed pins
|
||||
|
||||
|
||||
ESP-LyraP-LCD32 v1.1
|
||||
--------------------
|
||||
|
||||
:doc:`Initial release <user-guide-esp-lyrap-lcd32-v1.1>`
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraP-LCD32 Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_2_SCH_20200522A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-LCD32 PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_2_PCB_20200522AA.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,118 +0,0 @@
|
||||
=====================
|
||||
ESP-LyraP-TouchA v1.1
|
||||
=====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraP-TouchA extension board.
|
||||
|
||||
This board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraP-TouchA v1.1 is sold as part of the following kits:
|
||||
|
||||
* :doc:`user-guide-esp32-s2-kaluga-1-kit`
|
||||
* :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`
|
||||
|
||||
The ESP-LyraP-TouchA extends the functionality of your main board by adding touch buttons.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware setup instructions.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraP-TouchA's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraP-TouchA.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
The ESP-LyraP-TouchA has six touch buttons and is mainly designed for audio applications. However, the touch buttons can also be used for any other purposes.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Main Board Touch FPC Connector
|
||||
- Connect to main board's Touch FPC Connector.
|
||||
* - Touchpad
|
||||
- Capacitive touch electrode.
|
||||
* - Guard Ring
|
||||
- Connected to a touch sensor, the guard ring triggers an interrupt if wet (Water rejection). It indicates that the sensor array is also wet and most (if not all) touchpads are unusable due to the false detection of touches. After receiving this interrupt, the user might consider disabling all the touch sensors via software.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraP-TouchA, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a Touch FPC connector (e.g., ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-TouchA extension board
|
||||
- FPC cable
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Connect the two FPC connectors with the FPC cable.
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
See Section :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` of the ESP32-S2-Kaluga-1 kit user guide.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of ESP-LyraP-TouchA and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA-v1.1 block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA-v1.1 block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraP-TouchA Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraP-TouchA_V1.1_SCH_20200325A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-TouchA PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraP-TouchA_V1.1_PCB_20200325AA.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,150 +0,0 @@
|
||||
====================
|
||||
ESP-LyraT-8311A v1.2
|
||||
====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraT-8311A extension board.
|
||||
|
||||
This board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraT-8311A v1.2 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`.
|
||||
|
||||
The ESP-LyraT-8311A extends the functionality of your main board by adding sound processing functionality:
|
||||
|
||||
- Audio playback/recording
|
||||
- Processing of audio signals
|
||||
- Programmable buttons for easy control
|
||||
|
||||
This extension board can be used in many ways. The applications might include voice user interface, voice control, voice authorization, recording and playback of sound, etc.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-3d.png
|
||||
:align: center
|
||||
:width: 2545px
|
||||
:height: 1786px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraT-8311A
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A (click to enlarge)
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware setup instructions.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraT-8311A's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraT-8311A.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
The ESP-LyraT-8311A is mainly designed for audio applications. However, you can use your creativity to come up with any other use cases.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 565px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraT-8311A - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A - front (click to enlarge)
|
||||
|
||||
The description of components starts from the top right corner and then goes clockwise.
|
||||
|
||||
**Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Extension Header
|
||||
- Male Extension Header on the flip side is for mounting onto main board's Extension Header; Female Extension Header is for mounting other boards that have a Male Extension Header
|
||||
* - Function Button
|
||||
- This board has six programmable buttons
|
||||
* - Microphone
|
||||
- Supports Electret and MEMS microphones; this extension board is supplied with an electret microphone
|
||||
* - Headphone Connector
|
||||
- 6.3 mm (1/8") stereo headphone connector
|
||||
* - Speaker Connector
|
||||
- Connect an external speaker to the 2-pin connector
|
||||
* - PA
|
||||
- 3 W Audio signal amplifier for the external speaker
|
||||
* - External Mic-Matrix Connector
|
||||
- (Reserved) FPC connector for external Mic-Matrix (microphone boards)
|
||||
* - ADC
|
||||
- (Reserved) high-performance ADC/ES7243: 1 channel for microphone, 1 channel for acoustic echo cancellation (AEC) function
|
||||
* - Mono Audio Codec
|
||||
- ES8311 audio ADC and DAC; it can convert the analog signal picked up by the microphone or convert digital signal to play it back through a speaker or headphones
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraT-8311A, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Extension Header (e.g., ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraT-8311A extension board
|
||||
- Four mounting bolts (for stable mounting)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
To mount your ESP-LyraT-8311A onto the board with a female Extension Header:
|
||||
|
||||
1. Install the four mounting bolts onto the board with a female Extension Header
|
||||
2. Align the ESP-LyraT-8311A with the bolts and Extension Header and insert it carefully
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Depending on your application, see:
|
||||
|
||||
* `ESP-ADF Getting Started Guide <https://docs.espressif.com/projects/esp-adf/en/latest/get-started/index.html#about-esp-adf>`_ if you develop with ESP-ADF (Espressif Audio Development Framework).
|
||||
* Section :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` of the ESP32-S2-Kaluga-1 kit user guide if you develop directly with ESP-IDF (Espressif IOT Development Framework).
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of ESP-LyraT-8311A and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraT-8311A block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraT-8311A Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_2_SCH_20200421A.pdf>`_ (PDF)
|
||||
- `ESP-LyraT-8311A PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_2_PCB_20200324AA.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,159 +0,0 @@
|
||||
====================
|
||||
ESP-LyraT-8311A v1.3
|
||||
====================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on the ESP-LyraT-8311A extension board.
|
||||
|
||||
This board cannot be bought separately and is usually sold together with other Espressif development boards (e.g., ESP32-S2-Kaluga-1), which will be referred to as *main boards* below.
|
||||
|
||||
Currently, ESP-LyraT-8311A v1.3 is sold as part of the :doc:`user-guide-esp32-s2-kaluga-1-kit`.
|
||||
|
||||
The ESP-LyraT-8311A extends the functionality of your main board by adding sound processing functionality:
|
||||
|
||||
- Audio playback/recording
|
||||
- Processing of audio signals
|
||||
- Programmable buttons for easy control
|
||||
|
||||
This extension board can be used in many ways. The applications might include voice user interface, voice control, voice authorization, recording and playback of sound, etc.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-3d.png
|
||||
:align: center
|
||||
:width: 1934px
|
||||
:height: 1473px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraT-8311A
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A (click to enlarge)
|
||||
|
||||
The document consists of the following major sections:
|
||||
|
||||
- `Overview`_: Provides an overview and hardware setup instructions.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP-LyraT-8311A's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP-LyraT-8311A.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Overview
|
||||
========
|
||||
|
||||
The ESP-LyraT-8311A is mainly designed for audio applications. However, you can use your creativity to come up with any other use cases.
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 565px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraT-8311A - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A - front (click to enlarge)
|
||||
|
||||
The description of components starts from the top right corner and then goes clockwise.
|
||||
|
||||
**Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - Extension Header
|
||||
- Male Extension Header on the flip side is for mounting onto main board's Extension Header; Female Extension Header is for mounting other boards that have a Male Extension Header
|
||||
* - Function Button
|
||||
- This board has six programmable buttons
|
||||
* - Microphone
|
||||
- Supports Electret and MEMS microphones; this extension board is supplied with an electret microphone
|
||||
* - Headphone Connector
|
||||
- 6.3 mm (1/8") stereo headphone connector
|
||||
* - Speaker Connector
|
||||
- Connect an external speaker to the 2-pin connector
|
||||
* - PA
|
||||
- 3 W Audio signal amplifier for the external speaker
|
||||
* - External Mic-Matrix Connector
|
||||
- (Reserved) FPC connector for external Mic-Matrix (microphone boards)
|
||||
* - ADC
|
||||
- (Reserved) high-performance ADC/ES7243: 1 channel for microphone, 1 channel for acoustic echo cancellation (AEC) function
|
||||
* - Mono Audio Codec
|
||||
- ES8311 audio ADC and DAC; it can convert the analog signal picked up by the microphone or convert digital signal to play it back through a speaker or headphones
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP-LyraT-8311A, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- Board with a female Extension Header (e.g., ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraT-8311A extension board
|
||||
- Four mounting bolts (for stable mounting)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
To mount your ESP-LyraT-8311A onto the board with a female Extension Header:
|
||||
|
||||
1. Install the four mounting bolts onto the board with a female Extension Header
|
||||
2. Align the ESP-LyraT-8311A with the bolts and Extension Header and insert it carefully
|
||||
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Depending on your application, see:
|
||||
|
||||
* `ESP-ADF Getting Started Guide <https://docs.espressif.com/projects/esp-adf/en/latest/get-started/index.html#about-esp-adf>`_ if you develop with ESP-ADF (Espressif Audio Development Framework).
|
||||
* Section :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` of the ESP32-S2-Kaluga-1 kit user guide if you develop directly with ESP-IDF (Espressif IOT Development Framework).
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of ESP-LyraT-8311A and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraT-8311A block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A block diagram
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
ESP-LyraT-8311A v1.3
|
||||
--------------------
|
||||
|
||||
* ADC/ES7243 and ADC/ES7210 removed as the Mono Audio Codec chip provides all the needed functionality.
|
||||
|
||||
|
||||
ESP-LyraT-8311A v1.2
|
||||
--------------------
|
||||
|
||||
:doc:`Initial release <user-guide-esp-lyrat-8311a_v1.2>`
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
- `ESP-LyraT-8311A Schematic <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_3_SCH_20200522A.pdf>`_ (PDF)
|
||||
- `ESP-LyraT-8311A PCB Layout <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_3_PCB_20200522AA.pdf>`_ (PDF)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,380 +0,0 @@
|
||||
==========================
|
||||
ESP32-S2-Kaluga-1 Kit v1.2
|
||||
==========================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
New version available: :doc:`user-guide-esp32-s2-kaluga-1-kit`
|
||||
|
||||
The ESP32-S2-Kaluga-1 kit v1.2 is a development kit by Espressif that is mainly created to:
|
||||
|
||||
- Demonstrate the ESP32-S2's human-computer interaction functionalities
|
||||
- Provide the users with the tools for development of human-computer interaction applications based on the ESP32-S2
|
||||
|
||||
There are many ways of how the ESP32-S2's abundant functionalities can be used. For starters, the possible use cases may include:
|
||||
|
||||
- **Smart home**: From simplest smart lighting, smart door locks, smart sockets, to video streaming devices, security cameras, OTT devices, and home appliances
|
||||
- **Battery-powered equipment**: Wi-Fi mesh sensor networks, Wi-Fi-networked toys, wearable devices, health management equipment
|
||||
- **Industrial automation equipment**: Wireless control and robot technology, intelligent lighting, HVAC control equipment, etc.
|
||||
- **Retail and catering industry**: POS machines and service robots
|
||||
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-kit-v1.0-3d.png
|
||||
:align: center
|
||||
:width: 3452px
|
||||
:height: 1590px
|
||||
:scale: 20%
|
||||
:alt: ESP32-S2-Kaluga-1-Kit-Assembly
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1-Kit Overview (click to enlarge)
|
||||
|
||||
|
||||
The ESP32-S2-Kaluga-1 kit consists of the following boards:
|
||||
|
||||
- Main board: *ESP32-S2-Kaluga-1*
|
||||
- Extension boards:
|
||||
|
||||
- :doc:`user-guide-esp-lyrat-8311a_v1.2` - audio player
|
||||
- :doc:`user-guide-esp-lyrap-toucha-v1.1` - touch panel
|
||||
- :doc:`user-guide-esp-lyrap-lcd32-v1.1` - 3.2" LCD screen
|
||||
- :doc:`user-guide-esp-lyrap-cam-v1.0` - camera board
|
||||
|
||||
Due to the presence of multiplexed pins on ESP32-S2, certain extension board combinations have limited compatibility. For more details, please see :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-ext-board-compatibility`.
|
||||
|
||||
This document is **mostly dedicated to the main board** and its interaction with the extension boards. For more detailed information on each extension board, click their respective links.
|
||||
|
||||
This guide covers:
|
||||
|
||||
- `Getting Started`_: Provides an overview of the ESP32-S2-Kaluga-1 and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP32-S2-Kaluga-1's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP32-S2-Kaluga-1.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section describes how to get started with the ESP32-S2-Kaluga-1. It begins with a few introductory sections about the ESP32-S2-Kaluga-1, then Section `Start Application Development`_ provides instructions on how to do the initial hardware setup and then how to flash firmware onto the ESP32-S2-Kaluga-1.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
The ESP32-S2-Kaluga-1 main board is the heart of the kit. It integrates the ESP32-S2-WROVER module and all the connectors for extension boards. This board is the key tool in prototyping human-computer interaction interfaces.
|
||||
|
||||
The ESP32-S2-Kaluga-1 board has connectors for boards with:
|
||||
|
||||
- Extension header (ESP-LyraT-8311A, ESP-LyraP-LCD32)
|
||||
- Camera header (ESP-LyraP-CAM)
|
||||
- Touch FPC connector (ESP-LyraP-TouchA)
|
||||
- LCD FPC connector (no official extension boards yet)
|
||||
- I2C FPC connector (no official extension boards yet)
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-3d.png
|
||||
:align: center
|
||||
:width: 2631px
|
||||
:height: 1966px
|
||||
:scale: 25%
|
||||
:alt: ESP32-S2-Kaluga-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 (click to enlarge)
|
||||
|
||||
All the four extension boards are specially designed to support the following features:
|
||||
|
||||
* Touch panel control
|
||||
* Six touch buttons
|
||||
* Supports acrylic panels up to 5 mm
|
||||
* Wet hand operation
|
||||
* Water rejection, ESP32-S2 can be configured to disable all touchpads automatically if multiple pads are simultaneously covered with water and to re-enable touchpads if the water is removed
|
||||
|
||||
* Audio playback
|
||||
* Connect speakers to play audio
|
||||
* Use together with the Touch panel to control audio playback and adjust volume
|
||||
|
||||
* LCD display
|
||||
* LCD interface (8-bit parallel RGB, 8080, and 6800 interface)
|
||||
|
||||
* Camera image acquisition
|
||||
* Supports OV2640 and OV3660 camera modules
|
||||
* 8-bit DVP image sensor interface (ESP32-S2 also supports 16-bit DVP image sensors, you can design it yourself)
|
||||
* Clock frequency up to 40 MHz
|
||||
* Optimized DMA transmission bandwidth for easier transmission of high-resolution images
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 645px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - front (click to enlarge)
|
||||
|
||||
|
||||
The description of components starts from the ESP32-S2 module on the left side and then goes clockwise.
|
||||
|
||||
**Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S2-WROVER Module
|
||||
- Module integrating the ESP32-S2 chip that provides Wi-Fi connectivity, data processing power, and flexible data storage.
|
||||
* - 4.3" LCD FPC Connector
|
||||
- (Reserved) Connect to a 4.3" LCD extension board using the FPC cable.
|
||||
* - ESP Prog Connector
|
||||
- (Reserved) Connection for Espressif's download device (ESP-Prog) to flash ESP32-S2 system.
|
||||
* - JTAG Switch
|
||||
- Switch to ON to enable connection between ESP32-S2 and FT2232; JTAG debugging will then be possible using USB-UART/JTAG Port. See also :doc:`../../api-guides/jtag-debugging/index`.
|
||||
* - Breakout Header 2
|
||||
- Some GPIO pins of the ESP32-S2-WROVER module are broken out to this header, see labels on the board.
|
||||
* - USB-to-UART/JTAG Bridge
|
||||
- FT2232 adapter board allowing for communication over USB port using UART/JTAG protocols.
|
||||
* - Camera Header
|
||||
- Mount a camera extension board here (e.g., ESP-LyraP-CAM).
|
||||
* - Extension Header
|
||||
- Mount the extension boards having such connectors here.
|
||||
* - Reset Button
|
||||
- Press this button to restart the system.
|
||||
* - Boot Button
|
||||
- Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - USB-UART/JTAG Port
|
||||
- Communication interface (UART or JTAG) between a PC and the ESP32-S2 module.
|
||||
* - USB Power Port
|
||||
- Power supply for the board.
|
||||
* - Battery Port
|
||||
- Connect an external battery to the 2-pin battery connector.
|
||||
* - Power On LED
|
||||
- Turns on when the USB or an external power supply is connected to the board.
|
||||
* - Power Switch
|
||||
- Switch to ON to power the system.
|
||||
* - RGB Jumper
|
||||
- To have access to the RGB LED, place a jumper onto the pins.
|
||||
* - RGB LED
|
||||
- Programmable RGB LED and controlled by GPIO45. Before using it, you need to put RGB Jumper ON.
|
||||
* - Power Regulator
|
||||
- Regulator converts 5 V to 3.3 V.
|
||||
* - I2C FPC Connector
|
||||
- (Reserved) Connect to other I2C extension boards using the FPC cable.
|
||||
* - Breakout Header 1
|
||||
- Some GPIO pins of the ESP32-S2-WROVER module are broken out to this header, see labels on the board.
|
||||
* - Touch FPC Connector
|
||||
- Connect the ESP-LyraP-TouchA extension board using the FPC cable.
|
||||
* - Touch Switch
|
||||
- In OFF position, GPIO1 to GPIO14 are used for connection to touch sensors; switch to ON if you want to use them for other purposes.
|
||||
* - 3.2" LCD FPC connector
|
||||
- Connect a 3.2" LCD extension board (e.g., ESP-LyraP-LCD32) using the FPC cable.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-S2-Kaluga-1, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S2-Kaluga-1
|
||||
- Two USB 2.0 cables (Standard-A to Micro-B)
|
||||
|
||||
- For power supply
|
||||
- For UART/JTAG communication
|
||||
|
||||
- Computer running Windows, Linux, or macOS
|
||||
- Any extension boards of your choice
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
1. Connect the extension board(s) of your choice (go to their respective user guides if necessary)
|
||||
2. Plug in both USB cables
|
||||
3. Turn the **Power Switch** to ON - the Power On LED will light up
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup:
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment.
|
||||
|
||||
The programming guide and application examples for your ESP32-S2-Kaluga-1 kit can be found in `esp-dev-kits <https://github.com/espressif/esp-dev-kits/tree/master/esp32-s2-kaluga-1>`_ repository on GitHub.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order one or several samples of the kit, each ESP32-S2-Kaluga-1 development kit comes in an individual package containing:
|
||||
|
||||
- Main Board
|
||||
- ESP32-S2-Kaluga-1
|
||||
- Extension Boards:
|
||||
- ESP-LyraT-8311A
|
||||
- ESP-LyraP-CAM
|
||||
- ESP-LyraP-TouchA
|
||||
- ESP-LyraP-LCD32
|
||||
- Connectors
|
||||
- 20-pin FPC cable (to connect ESP32-S2-Kaluga-1 to ESP-LyraP-TouchA)
|
||||
- Fasteners
|
||||
- Mounting bolts (x8)
|
||||
- Screws (x4)
|
||||
- Nuts (x4)
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
A block diagram below shows the components of the ESP32-S2-Kaluga-1 and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 block diagram
|
||||
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
|
||||
There are four ways to provide power to the board:
|
||||
|
||||
- Micro USB port, default power supply
|
||||
- External battery via the 2-pin battery connector
|
||||
- 5V and GND header pins
|
||||
- 3V3 and GND header pins
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-v1.2-ext-board-compatibility:
|
||||
|
||||
Compatibility of Extension Boards
|
||||
---------------------------------
|
||||
|
||||
If you want to use more than one extension board at the same time, please check the table given below.
|
||||
|
||||
.. list-table::
|
||||
:widths: 20 10 30 40
|
||||
:header-rows: 1
|
||||
|
||||
* - Boards Used
|
||||
- HW Conflict
|
||||
- Limitations
|
||||
- Solution
|
||||
* - 8311A v1.2 + CAM v1.0
|
||||
- I2S Controller, IO46
|
||||
- ESP32-S2 has only one I2S interface. But both extension boards require connection via the ESP32-S2's I2S interface (ESP-LyraT-8311A in Standard mode, ESP-LyraP-CAM in Camera mode). If IO46 is used by both extension boards at the same time, ESP-LyraP-CAM experiences interferences when used.
|
||||
- No ready solution for now.
|
||||
* - TouchA v1.1 + LCD32 v1.1
|
||||
- IO11, IO6
|
||||
- Touch actions cannot be triggered because of the multiplexed pin IO11. ESP-LyraP-LCD32 is also affected because its BK (BLCT) pin is connected to pin IO6.
|
||||
- Do not initialize IO11 (NETWORK) and IO6 (PHOTO) for your ESP-LyraP-TouchA.
|
||||
* - 8311A v1.2 + LCD32 v1.1
|
||||
- IO6
|
||||
- The two extension boards can be used at the same time. However, since the BK (BLCT) pin of ESP32-S2-Kaluga-1 is connected to IO6, ESP-LyraT-8311A's pin BT_ADC cannot be used and the board's six buttons will not be available.
|
||||
- There is a solution that will allow you to use ESP-LyraT-8311A's pin BT_ADC, but will stop you from controlling the display background brightness with software: on your ESP-LyraP-LCD32 board, remove R39, change R41 to 100 Ohm, switch BLCT_L to on.
|
||||
* - TouchA v1.1 + 8311A v1.2
|
||||
- Pin BT_ADC on ESP-LyraT-8311A
|
||||
- The two extension boards can be used at the same time. However, ESP-LyraP-TouchA cannot be triggered if ESP-LyraT-8311A's pin BT_ADC is used to initialize the board's six buttons.
|
||||
- If you plan to use ESP-LyraT-8311A's pin BT_ADC, do not initialize pin IO6 (PHOTO) for your ESP-LyraP-TouchA.
|
||||
* - TouchA v1.1 + CAM v1.0
|
||||
- IO1, IO2, IO3
|
||||
- Cannot be used simultaneously because of the mentioned multiplexed pins.
|
||||
- For ESP-LyraP-TouchA, do not initialize IO1 (VOL_UP), IO2 (PLAY), and IO3 (VOL_DOWN).
|
||||
* - TouchA v1.1 + LCD32 v1.1 + CAM v1.0
|
||||
- IO1, IO2, IO3, IO6, IO11
|
||||
- Conflicts on the mentioned multiplexed pins.
|
||||
- **Solution 1**: For ESP-LyraP-TouchA, do not initialize IO1 (VOL_UP), IO2 (PLAY), IO3 (VOL_DOWN), IO6 (PHOTO) and IO11 (NETWORK). **Solution 2**: It will allow you to initialize IO6 (PHOTO) properly, but will stop you from controlling the background brightness with software. On your ESP-LyraP-LCD32, remove R39, change R41 to 100 Ohm, switch BLCT_L to on.
|
||||
* - TouchA v1.1 + LCD32 v1.1 + 8311A v1.2
|
||||
- IO6, IO11
|
||||
- IO11 is multiplexed; IO6 is also multiplexed stopping you from using ESP-LyraT-8311A's pin BT_ADC that is needed to initialize the board's six buttons.
|
||||
- **Solution 1**: For ESP-LyraP-TouchA, do not initialize IO6 (PHOTO) and IO11 (NETWORK). Please note that the six buttons on ESP-LyraT-8311A still cannot be used. **Solution 2**: On your ESP-LyraP-LCD32, remove R39, change R41 to 100 Ohm, switch BLCT_L to on. For your ESP-LyraP-TouchA, do not initialize IO11 (NETWORK). If you want to use the six buttons on your ESP-LyraT-8311A, also do not initialize IO6 (PHOTO).
|
||||
|
||||
Also, all extension boards and the :ref:`JTAG interface <jtag-debugging-tip-jtag-pins-reconfigured>` share the same pins IO39, IO40, IO41 and IO42. For this reason, the following may disturb the JTAG operation:
|
||||
|
||||
* Plugging in any extension board
|
||||
* Debugging an application that is using an extension board
|
||||
|
||||
|
||||
Known Issues
|
||||
============
|
||||
|
||||
.. list-table::
|
||||
:widths: 22 24 32 22
|
||||
:header-rows: 1
|
||||
|
||||
* - Hardware Issue
|
||||
- Description
|
||||
- Reason for Failure
|
||||
- Solution
|
||||
* - ESP-LyraP-CAM v1.0, pin IO45, IO46
|
||||
- Flashing firmware might be impossible with the extension board connected to the main board.
|
||||
- Incorrect timing sequence is fed to strapping pins IO45 and IO46 when the board is powered on. It stops the board from booting successfully.
|
||||
- While flashing the main board, keep the extension board disconnected.
|
||||
* - ESP-LyraP-CAM v1.0, pin IO45, IO46
|
||||
- Rebooting the board by pressing Reset might not lead to desired results.
|
||||
- Incorrect timing sequence is fed to strapping pins IO45 and IO46 when the board is powered on. It stops the board from booting successfully.
|
||||
- No ready solution for v1.2. This bug is fixed in ESP32-S2-Kaluga-1 V1.3.
|
||||
* - ESP-LyraT-8311A v1.2, pin IO46
|
||||
- Flashing firmware might be impossible with the extension board connected to the main board.
|
||||
- Incorrect timing sequence is fed to strapping pin IO46 when the board is powered on. It stops the board from booting successfully.
|
||||
- While flashing the main board, keep the extension board disconnected.
|
||||
* - ESP-LyraT-8311A v1.2, pin IO46
|
||||
- Rebooting the board by pressing Reset might not lead to desired results.
|
||||
- Incorrect timing sequence is fed to strapping pin IO46 when the board is powered on. It stops the board from booting successfully.
|
||||
- No ready solution for v1.2. This bug is fixed in ESP32-S2-Kaluga-1 V1.3.
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-esp-lyrap-cam-v1.0
|
||||
user-guide-esp-lyrap-lcd32-v1.1
|
||||
user-guide-esp-lyrap-toucha-v1.1
|
||||
user-guide-esp-lyrat-8311a_v1.2
|
||||
|
||||
- `ESP32-S2-WROVER Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
- :doc:`../../api-guides/jtag-debugging/index`
|
||||
|
||||
- `ESP32-S2-Kaluga-1 Schematic <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_2_SCH_20200424A.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 PCB Layout <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_2_PCB_20200325AF.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 Pin Mapping <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1.2_Pin-Mapping.xlsx>`_ (Excel)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
@ -1,395 +0,0 @@
|
||||
==========================
|
||||
ESP32-S2-Kaluga-1 Kit v1.3
|
||||
==========================
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
Older version: :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`
|
||||
|
||||
The ESP32-S2-Kaluga-1 kit v1.3 is a development kit by Espressif that is mainly created to:
|
||||
|
||||
- Demonstrate the ESP32-S2's human-computer interaction functionalities
|
||||
- Provide the users with the tools for development of human-computer interaction applications based on the ESP32-S2
|
||||
|
||||
There are many ways of how the ESP32-S2's abundant functionalities can be used. For starters, the possible use cases may include:
|
||||
|
||||
- **Smart home**: From simplest smart lighting, smart door locks, smart sockets, to video streaming devices, security cameras, OTT devices, and home appliances
|
||||
- **Battery-powered equipment**: Wi-Fi mesh sensor networks, Wi-Fi-networked toys, wearable devices, health management equipment
|
||||
- **Industrial automation equipment**: Wireless control and robot technology, intelligent lighting, HVAC control equipment, etc.
|
||||
- **Retail and catering industry**: POS machines and service robots
|
||||
|
||||
.. Image of v1.2 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-kit-v1.0-3d.png
|
||||
:align: center
|
||||
:width: 3452px
|
||||
:height: 1590px
|
||||
:scale: 20%
|
||||
:alt: ESP32-S2-Kaluga-1-Kit-Assembly
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1-Kit Overview (click to enlarge)
|
||||
|
||||
|
||||
The ESP32-S2-Kaluga-1 kit consists of the following boards:
|
||||
|
||||
- Main board: *ESP32-S2-Kaluga-1*
|
||||
- Extension boards:
|
||||
|
||||
- :doc:`user-guide-esp-lyrat-8311a_v1.3` - audio player
|
||||
- :doc:`user-guide-esp-lyrap-toucha-v1.1` - touch panel
|
||||
- :doc:`user-guide-esp-lyrap-lcd32-v1.2` - 3.2" LCD screen
|
||||
- :doc:`user-guide-esp-lyrap-cam-v1.1` - camera board
|
||||
|
||||
Due to the presence of multiplexed pins on ESP32-S2, certain extension board combinations have limited compatibility. For more details, please see :ref:`user-guide-esp32-s2-kaluga-1-kit-ext-board-compatibility`.
|
||||
|
||||
This document is **mostly dedicated to the main board** and its interaction with the extension boards. For more detailed information on each extension board, click their respective links.
|
||||
|
||||
This guide covers:
|
||||
|
||||
- `Getting Started`_: Provides an overview of the ESP32-S2-Kaluga-1 and hardware/software setup instructions to get started.
|
||||
- `Hardware reference`_: Provides more detailed information about the ESP32-S2-Kaluga-1's hardware.
|
||||
- `Hardware Revision Details`_: Covers revision history, known issues, and links to user guides for previous versions of the ESP32-S2-Kaluga-1.
|
||||
- `Related Documents`_: Gives links to related documentation.
|
||||
|
||||
|
||||
Getting Started
|
||||
===============
|
||||
|
||||
This section describes how to get started with the ESP32-S2-Kaluga-1. It begins with a few introductory sections about the ESP32-S2-Kaluga-1, then Section `Start Application Development`_ provides instructions on how to do the initial hardware setup and then how to flash firmware onto the ESP32-S2-Kaluga-1.
|
||||
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
The ESP32-S2-Kaluga-1 main board is the heart of the kit. It integrates the ESP32-S2-WROVER module and all the connectors for extension boards. This board is the key tool in prototyping human-computer interaction interfaces.
|
||||
|
||||
The ESP32-S2-Kaluga-1 board has connectors for boards with:
|
||||
|
||||
- Extension header (ESP-LyraT-8311A, ESP-LyraP-LCD32)
|
||||
- Camera header (ESP-LyraP-CAM)
|
||||
- Touch FPC connector (ESP-LyraP-TouchA)
|
||||
- LCD FPC connector (no official extension boards yet)
|
||||
- I2C FPC connector (no official extension boards yet)
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32s2-kaluga-1-v1.3-3d.png
|
||||
:align: center
|
||||
:width: 3089px
|
||||
:height: 2335px
|
||||
:scale: 25%
|
||||
:alt: ESP32-S2-Kaluga-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 (click to enlarge)
|
||||
|
||||
All the four extension boards are specially designed to support the following features:
|
||||
|
||||
* Touch panel control
|
||||
* Six touch buttons
|
||||
* Supports acrylic panels up to 5 mm
|
||||
* Wet hand operation
|
||||
* Water rejection, ESP32-S2 can be configured to disable all touchpads automatically if multiple pads are simultaneously covered with water and to re-enable touchpads if the water is removed
|
||||
|
||||
* Audio playback
|
||||
* Connect speakers to play audio
|
||||
* Use together with the Touch panel to control audio playback and adjust volume
|
||||
|
||||
* LCD display
|
||||
* LCD interface (8-bit parallel RGB, 8080, and 6800 interface)
|
||||
|
||||
* Camera image acquisition
|
||||
* Supports OV2640 and OV3660 camera modules
|
||||
* 8-bit DVP image sensor interface (ESP32-S2 also supports 16-bit DVP image sensors, you can design it yourself)
|
||||
* Clock frequency up to 40 MHz
|
||||
* Optimized DMA transmission bandwidth for easier transmission of high-resolution images
|
||||
|
||||
|
||||
Description of Components
|
||||
-------------------------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.3-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 645px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - front
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - front (click to enlarge)
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.3-layout-back.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - back
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - back (click to enlarge)
|
||||
|
||||
|
||||
The description of components starts from the ESP32-S2 module on the left side and then goes clockwise.
|
||||
|
||||
**Reserved** means that the functionality is available, but the current version of the kit does not use it.
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-S2-WROVER Module
|
||||
- Module integrating the ESP32-S2 chip that provides Wi-Fi connectivity, data processing power, and flexible data storage.
|
||||
* - 4.3" LCD FPC Connector
|
||||
- (Reserved) Connect to a 4.3" LCD extension board using the FPC cable.
|
||||
* - ESP Prog Connector
|
||||
- (Reserved) Connection for Espressif's download device (ESP-Prog) to flash ESP32-S2 system.
|
||||
* - JTAG Switch
|
||||
- Switch to ON to enable connection between ESP32-S2 and FT2232; JTAG debugging will then be possible using USB-UART/JTAG Port. See also :doc:`../../api-guides/jtag-debugging/index`.
|
||||
* - Breakout Header 2
|
||||
- Some GPIO pins of the ESP32-S2-WROVER module are broken out to this header, see labels on the board.
|
||||
* - USB-to-UART/JTAG Bridge
|
||||
- FT2232 adapter board allowing for communication over USB port using UART/JTAG protocols.
|
||||
* - Camera Header
|
||||
- Mount a camera extension board here (e.g., ESP-LyraP-CAM).
|
||||
* - Extension Header
|
||||
- Mount the extension boards having such connectors here.
|
||||
* - Reset Button
|
||||
- Press this button to restart the system
|
||||
* - Boot Button
|
||||
- Holding down **Boot** and then pressing **Reset** initiates Firmware Download mode for downloading firmware through the serial port.
|
||||
* - USB-UART/JTAG Port
|
||||
- Communication interface (UART or JTAG) between a PC and the ESP32-S2 module.
|
||||
* - USB Power Port
|
||||
- Power supply for the board.
|
||||
* - Battery Port
|
||||
- Connect an external battery to the 2-pin battery connector.
|
||||
* - Power On LED
|
||||
- Turns on when the USB or an external power supply is connected to the board.
|
||||
* - Power Switch
|
||||
- Switch to ON to power the system.
|
||||
* - RGB Jumper
|
||||
- To have access to the RGB LED, place a jumper onto the pins.
|
||||
* - RGB LED
|
||||
- Programmable RGB LED and controlled by GPIO45. Before using it, you need to put RGB Jumper ON.
|
||||
* - Power Regulator
|
||||
- Regulator converts 5 V to 3.3 V.
|
||||
* - I2C FPC Connector
|
||||
- (Reserved) Connect to other I2C extension boards using the FPC cable.
|
||||
* - Breakout Header 1
|
||||
- Some GPIO pins of the ESP32-S2-WROVER module are broken out to this header, see labels on the board.
|
||||
* - Touch FPC Connector
|
||||
- Connect the ESP-LyraP-TouchA extension board using the FPC cable.
|
||||
* - Touch Switch
|
||||
- In OFF position, GPIO1 to GPIO14 are used for connection to touch sensors; switch to ON if you want to use them for other purposes.
|
||||
* - 3.2" LCD FPC connector
|
||||
- Connect a 3.2" LCD extension board (e.g., ESP-LyraP-LCD32) using the FPC cable.
|
||||
|
||||
|
||||
Start Application Development
|
||||
-----------------------------
|
||||
|
||||
Before powering up your ESP32-S2-Kaluga-1, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-S2-Kaluga-1
|
||||
- Two USB 2.0 cables (Standard-A to Micro-B)
|
||||
|
||||
- For power supply
|
||||
- For UART/JTAG communication
|
||||
|
||||
- Computer running Windows, Linux, or macOS
|
||||
- Any extension boards of your choice
|
||||
|
||||
|
||||
Hardware Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
1. Connect the extension board(s) of your choice (go to their respective user guides if necessary)
|
||||
2. Plug in both USB cables
|
||||
3. Turn the **Power Switch** to ON - the Power On LED will light up
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-software-setup:
|
||||
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment.
|
||||
|
||||
The programming guide and application examples for your ESP32-S2-Kaluga-1 kit can be found in `esp-dev-kits <https://github.com/espressif/esp-dev-kits/tree/master/esp32-s2-kaluga-1>`_ repository on GitHub.
|
||||
|
||||
A Board Support Package can be found in `IDF Component Registry <https://components.espressif.com/component/espressif/esp32_s2_kaluga_kit>`_.
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
----------------------
|
||||
|
||||
Retail Orders
|
||||
^^^^^^^^^^^^^
|
||||
|
||||
If you order one or several samples of the kit, each ESP32-S2-Kaluga-1 development kit comes in an individual package.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32s2-kaluga-1-kit-v1.3-package-3d.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 - package
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - package
|
||||
|
||||
|
||||
The contents are as follows:
|
||||
|
||||
- Main Board
|
||||
- ESP32-S2-Kaluga-1
|
||||
- Extension Boards:
|
||||
- ESP-LyraT-8311A
|
||||
- ESP-LyraP-CAM
|
||||
- ESP-LyraP-TouchA
|
||||
- ESP-LyraP-LCD32
|
||||
- Connectors
|
||||
- 20-pin FPC cable (to connect ESP32-S2-Kaluga-1 to ESP-LyraP-TouchA)
|
||||
- Fasteners
|
||||
- Mounting bolts (x8)
|
||||
- Screws (x4)
|
||||
- Nuts (x4)
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
|
||||
Hardware Reference
|
||||
==================
|
||||
|
||||
Block Diagram
|
||||
-------------
|
||||
|
||||
.. Image of v1.2 is used as there are no visual changes
|
||||
|
||||
A block diagram below shows the components of the ESP32-S2-Kaluga-1 and their interconnections.
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 block diagram
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 block diagram
|
||||
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
|
||||
There are four ways to provide power to the board:
|
||||
|
||||
- Micro USB port, default power supply
|
||||
- External battery via the 2-pin battery connector
|
||||
- 5V and GND header pins
|
||||
- 3V3 and GND header pins
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-ext-board-compatibility:
|
||||
|
||||
Compatibility of Extension Boards
|
||||
---------------------------------
|
||||
|
||||
If you want to use more than one extension board at the same time, please check the table given below.
|
||||
|
||||
.. list-table::
|
||||
:widths: 20 15 33 32
|
||||
:header-rows: 1
|
||||
|
||||
* - Boards Used
|
||||
- HW Conflict
|
||||
- Limitations
|
||||
- Solution
|
||||
* - 8311A v1.3 + CAM v1.1
|
||||
- I2S Controller
|
||||
- ESP32-S2 has only one I2S interface. But both extension boards require connection via the ESP32-S2's I2S interface (LyraT-8311A in Standard mode, ESP-LyraP-CAM in Camera mode).
|
||||
- Utilize time division multiple access, or use a different audio module that can be connected via other GPIOs or DAC.
|
||||
* - TouchA v1.1 + LCD32 v1.2
|
||||
- IO11, IO6
|
||||
- Touch actions cannot be triggered because of the multiplexed pin IO11. ESP-LyraP-LCD32 will not be affected because its BLCT pin will be disconnected from IO6.
|
||||
- Do not initialize IO11 (NETWORK) for your ESP-LyraP-TouchA, or configure the BLCT pin to `-1` (= do not use BLCT) for your ESP-LyraP-LCD32.
|
||||
* - 8311A v1.3 + LCD32 v1.2
|
||||
- IO6
|
||||
- BLCT pin of ESP32-S2-Kaluga-1 will be disconnected from IO6.
|
||||
- Configure the BK pin to `-1` (= do not use BLCT) for your ESP-LyraP-LCD32.
|
||||
* - TouchA v1.1 + 8311A v1.3
|
||||
- Pin BT_ADC on ESP-LyraT-8311A
|
||||
- This pin is required for initialization of the six button on ESP-LyraT-8311A. At the same time, ESP-LyraP-TouchA needs this pin for its touch actions.
|
||||
- If you plan to use buttons on ESP-LyraT-8311A, do not initialize pin IO6 (PHOTO) for your ESP-LyraP-TouchA.
|
||||
* - TouchA v1.1 + CAM v1.1
|
||||
- IO1, IO2, IO3
|
||||
- Cannot be used simultaneously because of the mentioned multiplexed pins.
|
||||
- For ESP-LyraP-TouchA, do not initialize IO1 (VOL_UP), IO2 (PLAY), and IO3 (VOL_DOWN).
|
||||
* - TouchA v1.1 + LCD32 v1.2 + CAM v1.1
|
||||
- IO1, IO2, IO3, IO11
|
||||
- Conflicts on the mentioned multiplexed pins.
|
||||
- For ESP-LyraP-TouchA, do not initialize IO1 (VOL_UP), IO2 (PLAY), IO3 (VOL_DOWN), and IO11 (NETWORK).
|
||||
* - TouchA v1.1 + LCD32 v1.2 + 8311A v1.3
|
||||
- IO6, IO11
|
||||
- If ESP-LyraT-8311A's pin BT_ADC is used to initialize the board's six buttons, IO6 and IO11 will not be available for the other boards.
|
||||
- Do not initialize IO11 (NETWORK) for your ESP-LyraP-TouchA. Also, if you need to use BT_ADC, do not initialize IO6 (PHOTO).
|
||||
|
||||
Also, all extension boards and the :ref:`JTAG interface <jtag-debugging-tip-jtag-pins-reconfigured>` share the same pins IO39, IO40, IO41 and IO42. For this reason, the following may disturb the JTAG operation:
|
||||
|
||||
* Plugging in any extension board
|
||||
* Debugging an application that is using an extension board
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
=========================
|
||||
|
||||
ESP32-S2-Kaluga-1 Kit v1.3
|
||||
--------------------------
|
||||
|
||||
* The following pins re-assigned to fix the download issue
|
||||
|
||||
* Camera D2: GPIO36
|
||||
* Camera D3: GPIO37
|
||||
* AU_I2S1_SDI: GPIO34
|
||||
* AU_WAKE_INT: GPIO46
|
||||
|
||||
* RGB pin header moved to the board's edge
|
||||
* All dip switches moved to the flip side for convenient operation
|
||||
|
||||
|
||||
ESP32-S2-Kaluga-1 Kit v1.2
|
||||
--------------------------
|
||||
|
||||
:doc:`Initial release <user-guide-esp32-s2-kaluga-1-kit-v1.2>`
|
||||
|
||||
|
||||
Related Documents
|
||||
=================
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-esp32-s2-kaluga-1-kit-v1.2.rst
|
||||
user-guide-esp-lyrap-cam-v1.1
|
||||
user-guide-esp-lyrap-lcd32-v1.2
|
||||
user-guide-esp-lyrat-8311a_v1.3
|
||||
|
||||
- `ESP32-S2-WROVER Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
- :doc:`../../api-guides/jtag-debugging/index`
|
||||
|
||||
- `ESP32-S2-Kaluga-1 Schematic <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_3_SCH_20200526A.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 PCB Layout <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_3_PCB_20200526AE.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 Pin Mapping <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1.3-Pin-Mapping-v0.1.xlsx>`_ (Excel)
|
||||
|
||||
For other design documentation for the board, please contact us at sales@espressif.com.
|
||||
|
||||
|
||||
@ -124,7 +124,7 @@
|
||||
ESP32-S2-Saola-1 <../hw-reference/esp32s2/user-guide-saola-1-v1.2>
|
||||
ESP32-S2-DevKitM-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-devkitm-1/index.html>
|
||||
ESP32-S2-DevKitC-1 <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-devkitc-1/index.html>
|
||||
ESP32-S2-Kaluga-Kit <../hw-reference/esp32s2/user-guide-esp32-s2-kaluga-1-kit>
|
||||
ESP32-S2-Kaluga-Kit <https://docs.espressif.com/projects/esp-dev-kits/zh_CN/latest/esp32s2/esp32-s2-kaluga-1/index.html>
|
||||
|
||||
.. only:: esp32c3
|
||||
|
||||
|
||||
@ -1,116 +0,0 @@
|
||||
==================
|
||||
ESP-LyraP-CAM v1.0
|
||||
==================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraP-CAM 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraP-CAM v1.0 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2` 销售。
|
||||
|
||||
ESP-LyraP-CAM 可为你的主板增加摄像头功能。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraP-CAM 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraP-CAM 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraP-CAM 扩展板可为你的主板增加一个摄像头。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM - 正面和反面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM - 正面和反面
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 主板摄像头排针
|
||||
- 连接至主板摄像头连接器
|
||||
* - 电源 LED 指示灯
|
||||
- 如果电源供电电压正常，则红色 LED 亮起
|
||||
* - 摄像头模块连接器
|
||||
- 硬件支持 OV2640 和 OV3660 摄像头模块；目前，ESP-LyraP-CAM 扩展板默认提供 OV2640 摄像头模块
|
||||
* - 电源调节器
|
||||
- LDO 调压器（3.3 V 至 2.8 V 和 1.5 V）
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraP-CAM 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有摄像头扩展板连接器（排母）的主板（例如 ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-CAM 扩展板
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
将 ESP-LyraP-CAM 扩展板插入主板的连接头排母中。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 ESP32-S2-Kaluga-1 开发套件用户指南的 :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraP-CAM 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
尚无版本升级历史。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraP-CAM 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.0_SCH_20200302.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-CAM PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.0_PCB_20200302.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,130 +0,0 @@
|
||||
==================
|
||||
ESP-LyraP-CAM v1.1
|
||||
==================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraP-CAM 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraP-CAM v1.1 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit` 销售。
|
||||
|
||||
ESP-LyraP-CAM 可为你的主板增加摄像头功能。
|
||||
|
||||
.. Image of v1.0 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraP-CAM 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraP-CAM 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraP-CAM 扩展板可为你的主板增加一个摄像头。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.1-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM - 正面和反面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM - 正面和反面
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 主板摄像头排针
|
||||
- 连接至主板摄像头连接器
|
||||
* - 电源 LED 指示灯
|
||||
- 如果电源供电电压正常，则红色 LED 亮起
|
||||
* - 摄像头模块连接器
|
||||
- 硬件支持 OV2640 和 OV3660 摄像头模块；目前，ESP-LyraP-CAM 扩展板默认提供 OV2640 摄像头模块
|
||||
* - 电源调节器
|
||||
- LDO 调压器（3.3 V 至 2.8 V 和 1.5 V）
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraP-CAM 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有摄像头扩展板连接器（排母）的主板（例如 ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-CAM 扩展板
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
将 ESP-LyraP-CAM 扩展板插入主板的连接头排母中。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 ESP32-S2-Kaluga-1 开发套件用户指南的 :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraP-CAM 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. Image of v1.0 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-cam-v1.0-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-CAM 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-CAM 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
ESP-LyraP-CAM v1.1
|
||||
--------------------
|
||||
|
||||
* 仅更新丝印
|
||||
* 无实际硬件升级
|
||||
|
||||
|
||||
ESP-LyraP-CAM v1.0
|
||||
--------------------
|
||||
|
||||
:doc:`首次发布 <user-guide-esp-lyrap-cam-v1.0>`
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraP-CAM 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.1_SCH_20200511A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-CAM PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-CAM_V1.1_PCB_20200511AA.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,132 +0,0 @@
|
||||
====================
|
||||
ESP-LyraP-LCD32 v1.1
|
||||
====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraP-LCD32 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraP-CAM v1.1 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2` 销售。
|
||||
|
||||
ESP-LyraP-LCD32 可为你的主板增加 LCD 图像显示功能。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-3d.png
|
||||
:align: center
|
||||
:width: 2243px
|
||||
:height: 1534px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraP-LCD32
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32（点击放大）
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraP-LCD32 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraP-LCD32 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraP-LCD32 可为你的主板增加一块 3.2" LCD 图形显示屏（320 x 240 分辨率）。该显示屏通过 SPI 总线连接到 ESP32-S2。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - 正面（点击放大）
|
||||
|
||||
|
||||
在下面的组件描述中，**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 扩展板排针
|
||||
- 连接器排针，用于插入主板上的排母
|
||||
* - LCD 显示屏
|
||||
- 本版本支持 3.2" 的 SPI LCD 显示模块（320 x 240 分辨率）；显示器驱动（控制器）为 Sitronix ST7789V
|
||||
* - 触摸屏开关
|
||||
- 暂不支持触摸屏，因此请注意保持关闭，确保相关管脚复用不受影响。
|
||||
* - 主板 3.2" LCD FPC 连接器
|
||||
- （保留）连接到主板的 3.2" LCD FPC 连接器
|
||||
* - 控制开关
|
||||
- 打开将 Reset/Backlight_control/CS 设置为默认高电平或低电平；关闭允许释放这些管脚用作它用。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraP-LCD32 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有摄像头扩展板连接器（排母）的主板（例如 ESP32-S2-Kaluga-1、ESP-LyraT-8311A)
|
||||
- ESP-LyraP-LCD32 扩展板
|
||||
- 4 x 螺栓，用于保证安装稳定
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
请按照以下步骤将 ESP-LyraP-LCD32 安装到带有排母的主板上：
|
||||
|
||||
1. 先将 4 个螺栓固定到主板的相应位置上
|
||||
2. 对齐 ESP-LyraP-LCD32 与主板和螺栓的位置，并小心插入
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 ESP32-S2-Kaluga-1 开发套件用户指南的 :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraP-LCD32 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-LCD32 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
尚无版本升级历史。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraP-LCD32 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_1_SCH_20200324A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-LCD32 PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_1_PCB_20200324AC.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,154 +0,0 @@
|
||||
====================
|
||||
ESP-LyraP-LCD32 v1.2
|
||||
====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraP-LCD32 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraP-LCD32 v1.2 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit` 销售。
|
||||
|
||||
ESP-LyraP-LCD32 可为你的主板增加 LCD 图像显示功能。
|
||||
|
||||
.. Image of v1.1 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.1-3d.png
|
||||
:align: center
|
||||
:width: 2243px
|
||||
:height: 1534px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraP-LCD32
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32（点击放大）
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraP-LCD32 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraP-LCD32 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraP-LCD32 可为你的主板增加了一块 3.2" LCD 图形显示屏（320 x 240 分辨率）。该显示屏通过 SPI 总线连接到 ESP32-S2。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 489px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - 正面（点击放大）
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-layout-back.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraP-LCD32 - 反面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 - 反面（点击放大）
|
||||
|
||||
|
||||
在下面的组件描述中，**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 扩展板排针
|
||||
- 连接器排针，用于插入主板上的排母
|
||||
* - LCD 显示屏
|
||||
- 本版本支持 3.2" 的 SPI LCD 显示模块（320 x 240 分辨率）；显示器驱动（控制器）为 Sitronix ST7789V 或 Ilitek ILI9341
|
||||
* - 触摸屏开关
|
||||
- 暂不支持触摸屏，因此请注意保持关闭，确保相关管脚复用不受影响。
|
||||
* - 主板 3.2" LCD FPC 连接器
|
||||
- （保留）连接到主板的 3.2" LCD FPC 连接器
|
||||
* - 控制开关
|
||||
- 打开将 Reset/Backlight_control/CS 设置为默认高电平或低电平；关闭允许释放这些管脚用作它用。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraP-LCD32 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有摄像头扩展板连接器（排母）的主板（例如 ESP32-S2-Kaluga-1、ESP-LyraT-8311A)
|
||||
- ESP-LyraP-LCD32 扩展板
|
||||
- 4 x 螺栓，用于保证安装稳定
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
请按照以下步骤将 ESP-LyraP-LCD32 安装到带有排母的主板上：
|
||||
|
||||
1. 先将 4 个螺栓固定到主板的相应位置上
|
||||
2. 对齐 ESP-LyraP-LCD32 与主板和螺栓的位置，并小心插入
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 ESP32-S2-Kaluga-1 开发套件用户指南的 :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraP-LCD32 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-lcd32-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-LCD32 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-LCD32 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
ESP-LyraP-LCD32 v1.2
|
||||
--------------------
|
||||
|
||||
* LCD 背光默认打开 (ON)，无法通过 MCU 实现控制
|
||||
* 移除 Touch 驱动及相关开关，以避免管脚复用带来的影响
|
||||
|
||||
|
||||
ESP-LyraP-LCD32 v1.1
|
||||
--------------------
|
||||
|
||||
:doc:`首次发布 <user-guide-esp-lyrap-lcd32-v1.1>`
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraP-LCD32 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_2_SCH_20200522A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-LCD32 PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-LCD32_V1_2_PCB_20200522AA.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,118 +0,0 @@
|
||||
=====================
|
||||
ESP-LyraP-TouchA v1.1
|
||||
=====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraP-TouchA 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraP-TouchA v1.1 扩展板正在搭配以下套件销售：
|
||||
|
||||
* :doc:`user-guide-esp32-s2-kaluga-1-kit`
|
||||
* :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`
|
||||
|
||||
ESP-LyraP-TouchA 可为你的主板增加触摸按键功能。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-3d.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraT-8311A 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraP-TouchA 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraP-TouchA 共有 6 个触摸按钮，主要用于音频应用，但也可以根据实际需要用作它用。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-layout-front.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 主板触摸 FPC 连接器
|
||||
- 用于将子板连接到主板的触摸 FPC 连接器。
|
||||
* - 触摸板
|
||||
- 电容式触摸电极。
|
||||
* - 保护环
|
||||
- 连接至触摸传感器，可在开发板遇水时触发中断保护（遇水电路保护）。此时，传感器阵列也将遇水，绝大多数（或全部）触摸板将由于大量误触而无法使用。在接收到此中断后，用户可自行裁决是否通过软件禁用所有触摸传感器。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraP-TouchA 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有触摸 FPC 扩展板连接器的主板（例如 ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraP-TouchA 扩展板
|
||||
- FPC 线
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
使用 FPC 连接两个 FPC 连接器。
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 ESP32-S2-Kaluga-1 开发套件用户指南的 :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraP-TouchA 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrap-toucha-v1.1-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraP-TouchA-v1.1 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraP-TouchA-v1.1 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
尚无版本升级历史。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraP-TouchA 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-TouchA_V1.1_SCH_20200325A.pdf>`_ (PDF)
|
||||
- `ESP-LyraP-TouchA PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraP-TouchA_V1.1_PCB_20200325AA.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,150 +0,0 @@
|
||||
====================
|
||||
ESP-LyraT-8311A v1.2
|
||||
====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraT-8311A 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraT-8311A v1.2 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2` 销售。
|
||||
|
||||
ESP-LyraT-8311A 扩展板可为你的主板增加音频处理功能。
|
||||
|
||||
- 音频播放/录音
|
||||
- 音频信号处理
|
||||
- 支持可编程按钮，可实现轻松控制
|
||||
|
||||
ESP-LyraT-8311A 扩展板有多种使用方式。该应用程序包括语音用户界面、语音控制、语音授权、录音和播放等功能。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-3d.png
|
||||
:align: center
|
||||
:width: 2545px
|
||||
:height: 1786px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraT-8311A
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A（点击放大）
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraT-8311A 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraT-8311A 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraT-8311A 主要用于音频应用，但也可根据实际需求用作它用。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 565px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraT-8311A - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A - 正面（点击放大）
|
||||
|
||||
下表将从图片右上角开始，以顺时针顺序介绍上图中的主要组件。
|
||||
|
||||
**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 扩展板排针
|
||||
- 反面的排针用于于主板上的排母相连；排母用于连接其他带有排针的主板
|
||||
* - 功能按钮
|
||||
- 带有 6 个可编程按钮
|
||||
* - 麦克风
|
||||
- 支持驻极体和 MEMS 麦克风；此扩展板默认带有驻极体麦克风
|
||||
* - 耳机接口
|
||||
- 6.3 mm (1/8") 立体声耳机接口
|
||||
* - 扬声器连接器
|
||||
- 2 针连接器，用于连接外部扬声器
|
||||
* - PA
|
||||
- 3 W 音频信号放大器，配合外部扬声器使用
|
||||
* - 外部麦克风矩阵连接器
|
||||
- （保留）FPC 连接器，用于连接外部麦克风矩阵（麦克风开发板）
|
||||
* - ADC
|
||||
- （保留）高性能 ADC/ES7243，包括 1 个麦克风通道、1 个声学回声消除 (AEC) 功能通道
|
||||
* - 单声道音频编解器
|
||||
- ES8311 音频 ADC 和 DAC，可转换麦克风拾音的模拟信号；或转换数字信号，使其可通过扬声器或耳机进行播放
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraT-8311A 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有连接器（排母）的主板（例如 ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraT-8311A 扩展板
|
||||
- 4 x 螺栓，用于保证安装稳定
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
请按照以下步骤将 ESP-LyraT-8311A 安装到带有排母的主板上：
|
||||
|
||||
1. 先将 4 个螺栓固定到主板的相应位置上
|
||||
2. 对齐 ESP-LyraT-8311A 与主板和螺栓的位置，并小心插入
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请根据你的具体应用，参考以下部分：
|
||||
|
||||
* ESP-ADF（乐鑫音频开发框架）的用户，请前往 `ESP-ADF 入门指南 <https://docs.espressif.com/projects/esp-adf/en/latest/get-started/index.html#about-esp-adf>`_。
|
||||
* ESP32-IDF（乐鑫 IoT 开发框架）的用户，请前往 ESP32-S2-Kaluga-1 开发套件用户指南 :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraT-8311A 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraT-8311A 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
尚无版本升级历史。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraT-8311A 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_2_SCH_20200421A.pdf>`_ (PDF)
|
||||
- `ESP-LyraT-8311A PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_2_PCB_20200324AA.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,159 +0,0 @@
|
||||
====================
|
||||
ESP-LyraT-8311A v1.3
|
||||
====================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
本用户指南可提供 ESP-LyraT-8311A 扩展板的相关信息。
|
||||
|
||||
本扩展板通常仅与乐鑫其他开发板一起销售（即 *主板*，比如 ESP32-S2-Kaluga-1），不可单独购买。
|
||||
|
||||
目前，ESP-LyraT-8311A v1.3 扩展板正在搭配 :doc:`user-guide-esp32-s2-kaluga-1-kit` 销售。
|
||||
|
||||
ESP-LyraT-8311A 扩展板可为你的主板增加音频处理功能。
|
||||
|
||||
- 音频播放/录音
|
||||
- 音频信号处理
|
||||
- 支持可编程按钮，可实现轻松控制
|
||||
|
||||
ESP-LyraT-8311A 扩展板有多种使用方式。该应用程序包括语音用户界面、语音控制、语音授权、录音和播放等功能。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-3d.png
|
||||
:align: center
|
||||
:width: 1934px
|
||||
:height: 1473px
|
||||
:scale: 30%
|
||||
:alt: ESP-LyraT-8311A
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A (click to enlarge)
|
||||
|
||||
本指南包括如下内容：
|
||||
|
||||
- `概述`_：提供为了使用 ESP-LyraT-8311A 而必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP-LyraT-8311A 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
概述
|
||||
====
|
||||
|
||||
ESP-LyraT-8311A 主要用于音频应用，但也可根据实际需求用作它用。
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 565px
|
||||
:scale: 70%
|
||||
:alt: ESP-LyraT-8311A - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A - 正面（点击放大）
|
||||
|
||||
下表将从图片右上角开始，以顺时针顺序介绍上图中的主要组件。
|
||||
|
||||
**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - 扩展板排针
|
||||
- 反面的排针用于于主板上的排母相连；排母用于连接其他带有排针的主板
|
||||
* - 功能按钮
|
||||
- 带有 6 个可编程按钮
|
||||
* - 麦克风
|
||||
- 支持驻极体和 MEMS 麦克风；此扩展板默认带有驻极体麦克风
|
||||
* - 耳机接口
|
||||
- 6.3 mm (1/8") 立体声耳机接口
|
||||
* - 扬声器连接器
|
||||
- 2 针连接器，用于连接外部扬声器
|
||||
* - PA
|
||||
- 3 W 音频信号放大器，配合外部扬声器使用
|
||||
* - 外部麦克风矩阵连接器
|
||||
- （保留）FPC 连接器，用于连接外部麦克风矩阵（麦克风开发板）
|
||||
* - ADC
|
||||
- （保留）高性能 ADC/ES7243，包括 1 个麦克风通道、1 个声学回声消除 (AEC) 功能通道
|
||||
* - 单声道音频编解器
|
||||
- ES8311 音频 ADC 和 DAC，可转换麦克风拾音的模拟信号；或转换数字信号，使其可通过扬声器或耳机进行播放
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP-LyraT-8311A 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- 带有连接器（排母）的主板（例如 ESP32-S2-Kaluga-1)
|
||||
- ESP-LyraT-8311A 扩展板
|
||||
- 4 x 螺栓，用于保证安装稳定
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
请按照以下步骤将 ESP-LyraT-8311A 安装到带有排母的主板上：
|
||||
|
||||
1. 先将 4 个螺栓固定到主板的相应位置上
|
||||
2. 对齐 ESP-LyraT-8311A 与主板和螺栓的位置，并小心插入
|
||||
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请根据你的具体应用，参考以下部分：
|
||||
|
||||
* ESP-ADF（乐鑫音频开发框架）的用户，请前往 `ESP-ADF 入门指南 <https://docs.espressif.com/projects/esp-adf/en/latest/get-started/index.html#about-esp-adf>`_。
|
||||
* ESP32-IDF（乐鑫 IoT 开发框架）的用户，请前往 ESP32-S2-Kaluga-1 开发套件用户指南 :ref:`user-guide-esp32-s2-kaluga-1-kit-software-setup` 章节。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP-LyraT-8311A 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-lyrat-8311a-v1.3-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP-LyraT-8311A 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP-LyraT-8311A 功能框图
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
ESP-LyraT-8311A v1.3
|
||||
--------------------
|
||||
|
||||
* 移除 ADC/ES7243 和 ADC/ES7210，相关功能由单声道音频编解器提供。
|
||||
|
||||
|
||||
ESP-LyraT-8311A v1.2
|
||||
--------------------
|
||||
|
||||
:doc:`首次发布 <user-guide-esp-lyrat-8311a_v1.2>`
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
- `ESP-LyraT-8311A 原理图 <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_3_SCH_20200522A.pdf>`_ (PDF)
|
||||
- `ESP-LyraT-8311A PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP-LyraT-8311A_V1_3_PCB_20200522AA.pdf>`_ (PDF)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,380 +0,0 @@
|
||||
=============================
|
||||
ESP32-S2-Kaluga-1 套件 v1.2
|
||||
=============================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
最新版本：:doc:`user-guide-esp32-s2-kaluga-1-kit`
|
||||
|
||||
ESP32-S2-Kaluga-1 v1.2 是一款来自乐鑫的开发套件，主要可用于以下目的：
|
||||
|
||||
- 展示 ESP32-S2 芯片的人机交互功能
|
||||
- 为用户提供基于 ESP32-S2 的人机交互应用开发工具
|
||||
|
||||
ESP32-S2 的功能强大，应用场景非常丰富。对于初学者来说，可能的用例包括：
|
||||
|
||||
- **智能家居**：从最简单的智能照明、智能门锁、智能插座，到更复杂的视频流设备、安防摄像头、OTT 设备和家用电器等
|
||||
- **电池供电设备**：Wi-Fi mesh 传感器网络、Wi-Fi 网络玩具、可穿戴设备、健康管理设备等
|
||||
- **工业自动化设备**：无线控制与机器人技术、智能照明、HVAC 控制设备等
|
||||
- **零售和餐饮业**：POS 机和服务机器人
|
||||
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-kit-v1.0-3d.png
|
||||
:align: center
|
||||
:width: 3452px
|
||||
:height: 1590px
|
||||
:scale: 20%
|
||||
:alt: ESP32-S2-Kaluga-1-Kit-Assembly
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1-Kit 概述（点击放大）
|
||||
|
||||
|
||||
ESP32-S2-Kaluga-1 套件包括以下几个开发板：
|
||||
|
||||
- 主板：*ESP32-S2-Kaluga-1*
|
||||
- 扩展板：
|
||||
|
||||
- :doc:`user-guide-esp-lyrat-8311a_v1.2` - 音频播放器
|
||||
- :doc:`user-guide-esp-lyrap-toucha-v1.1` - 触摸板
|
||||
- :doc:`user-guide-esp-lyrap-lcd32-v1.1` - 3.2" LCD 屏
|
||||
- :doc:`user-guide-esp-lyrap-cam-v1.0` - 摄像头
|
||||
|
||||
由于 ESP32-S2 的管脚复用，部分扩展板的兼容性有所限制，具体请见 :ref:`user-guide-esp32-s2-kaluga-1-kit-v1.2-ext-board-compatibility`。
|
||||
|
||||
本文档主要介绍 **ESP32-S2-Kaluga-1 主板** 及其与扩展板的交互。更多有关具体扩展板的信息，请点击相应的链接。
|
||||
|
||||
本指南包括：
|
||||
|
||||
- `快速入门`_：提供 ESP32-S2-Kaluga-1 的简要概述及必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP32-S2-Kaluga-1 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发板的“修订历史”、“已知问题”以及此开发板之前版本的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
快速入门
|
||||
========
|
||||
|
||||
本节介绍如何开始使用 ESP32-S2-Kaluga-1，主要包括三大部分：首先，介绍一些关于 ESP32-S2-Kaluga-1 的基本信息；然后，在 `应用程序开发`_ 章节介绍如何进行硬件初始化；最后，介绍如何为 ESP32-S2-Kaluga-1 烧录固件。
|
||||
|
||||
|
||||
概述
|
||||
----
|
||||
|
||||
ESP32-S2-Kaluga-1 主板是整个套件的核心。该主板集成了 ESP32-S2-WROVER 模组，并配备连接至各个扩展板的连接器。ESP32-S2-Kaluga-1 是人机交互接口原型设计的关键工具。
|
||||
|
||||
ESP32-S2-Kaluga-1 主板配备了多个连接器，可用于连接相应扩展板：
|
||||
|
||||
- 扩展板连接器，用于连接 ESP-LyraT-8311A、ESP-LyraP-LCD32
|
||||
- 摄像头连接器，用于连接 ESP-LyraP-CAM
|
||||
- 触摸 FPC 连接器，用于连接 ESP-LyraP-TouchA
|
||||
- LCD FPC 连接器（尚无可用官方配套扩展板）
|
||||
- I2C FPC 连接器（尚无可用官方配套扩展板）
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-3d.png
|
||||
:align: center
|
||||
:width: 2631px
|
||||
:height: 1966px
|
||||
:scale: 25%
|
||||
:alt: ESP32-S2-Kaluga-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1（点击放大）
|
||||
|
||||
所有四个扩展板都经过特别设计，以支持以下功能：
|
||||
|
||||
* 触摸板控制
|
||||
* 带有 6 个触摸按钮
|
||||
* 支持最大 5 mm 亚克力板
|
||||
* 支持湿手操作
|
||||
* 支持防水功能。ESP32-S2 可以配置为在多个触摸板同时被水复盖时自动禁用所有触摸板功能，并在去除水滴后重新启用触摸板
|
||||
|
||||
* 音频播放
|
||||
* 连接扬声器，以播放音频
|
||||
* 配合触控板使用，可控制音频播放和调节音量
|
||||
|
||||
* LCD 显示屏
|
||||
* LCD 接口（8 位并行 RGB、8080 和 6800 接口）
|
||||
|
||||
* 摄像头图像采集
|
||||
* 支持 OV2640 和 OV3660 摄像头模块
|
||||
* 8-bit DVP 图像传感器接口（ESP32-S2 还支持 16 位 DVP 图像传感器，但需要你自行进行二次开发）
|
||||
* 支持高达 40 MHz 时钟频率
|
||||
* 优化 DMA 传输带宽，便于传输高分辨率图像
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 645px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - 正面（点击放大）
|
||||
|
||||
|
||||
下表将从左边的 ESP32-S2 模组开始，以顺时针顺序介绍上图中的主要组件。
|
||||
|
||||
**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - ESP32-S2-WROVER 模组
|
||||
- 集成 ESP32-S2 芯片，可提供 Wi-Fi 连接、数据处理和灵活的数据存储功能。
|
||||
* - 4.3" LCD FPC 连接器
|
||||
- （保留）可使用 FPC 线连接 4.3" LCD 扩展板。
|
||||
* - ESP Prog 连接器
|
||||
- （保留）用于连接乐鑫固件烧录设备 (ESP-Prog)。
|
||||
* - JTAG 开关
|
||||
- 切换到 ON 方向，启用 ESP32-S2 和 FT2232 之间的连接。此时，可通过 USB-UART/JTAG 端口进行 JTAG 调试，详见 :doc:`../../api-guides/jtag-debugging/index`。
|
||||
* - 引出管脚排针 2
|
||||
- ESP32-S2-WROVER 模组的部分 GPIO 直接引出至该开发板（详见开发板上的标记）。
|
||||
* - USB-to-UART/JTAG 桥接器
|
||||
- FT2232 适配器开发板，允许在 USB 端口使用 UART/JTAG 协议通信。
|
||||
* - 摄像头连接器
|
||||
- 用于连接摄像头扩展板，比如 ESP-LyraP-CAM。
|
||||
* - 扩展板连接器
|
||||
- 用于连接带有配套连接器的扩展板。
|
||||
* - Reset 复位按钮
|
||||
- 用于重启系统。
|
||||
* - Boot 按钮
|
||||
- 按下 **Boot** 键并保持，同时按一下 **Reset** 键，进入“固件下载”模式，通过串口下载固件。
|
||||
* - USB-UART/JTAG 端口
|
||||
- PC 和 ESP32-S2 模组之间的通信接口（UART 或 JTAG）。
|
||||
* - USB 电源端口
|
||||
- 为开发板供电。
|
||||
* - 电池端口
|
||||
- 2 针连接器，用于连接外部电池。
|
||||
* - 电源 LED 指示灯
|
||||
- 当 USB 电源或外部电源供电电压正常，则 LED 亮起。
|
||||
* - 电源开关
|
||||
- 打开可为系统供电。
|
||||
* - RGB 跳线
|
||||
- 如需使用 RGB LED，需在该位置增加一个跳线。
|
||||
* - RGB LED 指示灯
|
||||
- 可编程 RGB LED 指示灯，受控于 GPIO45。在使用前需要安装 RGB 跳线。
|
||||
* - 调压器
|
||||
- 5 V 转 3.3 V 调压器。
|
||||
* - I2C FPC 连接器
|
||||
- （保留）可通过 FPC 线连接其他 I2C 扩展板。
|
||||
* - 引出管脚排针 1
|
||||
- ESP32-S2-WROVER 模组的部分 GPIO 直接引出至该开发板（详见开发板上的标记）。
|
||||
* - 触摸 FPC 连接器
|
||||
- 可通过 FPC 线连接 ESP-LyraP-TouchA 扩展板。
|
||||
* - 触摸开关
|
||||
- 切换到 OFF 方向，配置 GPIO1 到 GPIO14 连接触摸传感器；切换到 ON 方向，配置 GPIO1 到 GPIO14 用于其他目的。
|
||||
* - 3.2" LCD FPC 连接器
|
||||
- 可通过 FPC 线连接 3.2" LCD 扩展板，比如 ESP-LyraP-LCD32。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP32-S2-Kaluga-1 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S2-Kaluga-1
|
||||
- 两根 USB 2.0 电缆（标准 A 转 Micro-B)
|
||||
|
||||
- 电源选项
|
||||
- 用于 UART/JTAG 通信
|
||||
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
- 你选择的任何扩展板
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
1. 连接你选择的扩展板（更多信息，请见对应拓展板的用户指南）
|
||||
2. 插入两根 USB 电缆
|
||||
3. 打开 **电源开关** 时，**电源 LED 指示灯** 应点亮。
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-v1.2-software-setup:
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 一节查看如何快速设置开发环境。
|
||||
|
||||
你还可以点击 `这里 <https://github.com/espressif/esp-dev-kits/tree/master/esp32-s2-kaluga-1>`_，获取有关 ESP32-S2-Kaluga-1 套件编程指南与应用示例的更多内容。
|
||||
|
||||
|
||||
内容和包装
|
||||
----------
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
每一个零售 ESP32-S2-Kaluga-1 开发套件均有独立包装，内含以下部分：
|
||||
|
||||
- 主板
|
||||
- ESP32-S2-Kaluga-1
|
||||
- 扩展板：
|
||||
- ESP-LyraT-8311A
|
||||
- ESP-LyraP-CAM
|
||||
- ESP-LyraP-TouchA
|
||||
- ESP-LyraP-LCD32
|
||||
- 连接器
|
||||
- 20 针 FPC 线（用于连接 ESP32-S2-Kaluga-1 主板至 ESP-LyraP-TouchA 扩展板）
|
||||
- 紧固件
|
||||
- 安装螺栓 (x 8)
|
||||
- 螺丝 (x 4)
|
||||
- 螺母 (x 4)
|
||||
|
||||
零售购买，请前往 https://www.espressif.com/zh-hans/contact-us/get-samples。
|
||||
|
||||
|
||||
批发订单
|
||||
^^^^^^^^
|
||||
|
||||
ESP32-S2-Kaluga-1 开发套件的批发包装为纸板箱。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
ESP32-S2-Kaluga-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 功能框图
|
||||
|
||||
|
||||
电源选项
|
||||
--------
|
||||
|
||||
开发板可任一选用以下四种供电方式：
|
||||
|
||||
- Micro USB 端口供电（默认）
|
||||
- 通过 2 针电池连接器使用外部电池供电
|
||||
- 5V / GND 管脚供电
|
||||
- 3V3 / GND 管脚供电
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-v1.2-ext-board-compatibility:
|
||||
|
||||
扩展板的兼容性
|
||||
--------------
|
||||
|
||||
如需同时使用多块扩展板，请首先查看以下兼容性信息：
|
||||
|
||||
.. list-table::
|
||||
:widths: 20 10 30 40
|
||||
:header-rows: 1
|
||||
|
||||
* - 扩展板组合
|
||||
- 复用接口或管脚
|
||||
- 无法运行原因
|
||||
- 解决方案
|
||||
* - 8311A v1.2 + CAM v1.0
|
||||
- I2S 控制、IO46
|
||||
- ESP32-S2 仅有 1 个 I2S 接口，但这两个开发板均需使用 ESP32-S2 的 I2S 接口进行通信（ESP-LyraT-8311A 使用标准模式；ESP-LyraP-CAM 使用 Camera 协议）。如两个扩展板同时复用 IO46，ESP-LyraP-CAM 的正常使用将受到干扰。
|
||||
- 暂无解决方法。
|
||||
* - TouchA v1.1 + LCD32 v1.1
|
||||
- IO11、IO6
|
||||
- ESP-LyraP-TouchA 因管脚 IO11 复用，导致无法触发触摸动作；ESP-LyraP-LCD32 因 BK (BLCT) 管脚连接至 IO6 管脚复用，因此也无法使用。
|
||||
- 不要初始化 ESP-LyraP-TouchA 扩展板的 IO11 (NETWORK) 和 IO6 (PHOTO) 管脚。
|
||||
* - 8311A v1.2 + LCD32 v1.1
|
||||
- IO6
|
||||
- 这两款扩展板可以同时使用，但由于 ESP32-S2-Kaluga-1 的 BK (BLCT) 管脚已连接至 IO6，因此，ESP-LyraT-8311A 的 BT_ADC 管脚和 6 个按钮均无法使用。
|
||||
- 用户也可通过以下配置使用 ESP-LyraT-8311A 的 BT_ADC 管脚：移除 ESP-LyraP-LCD32 扩展板上的 R39，将 R41 换为 100 欧，并将 BLCT_L 开关打开。注意，此配置将导致用户无法通过软件控制显示屏的背光亮度。
|
||||
* - TouchA v1.1 + 8311A v1.2
|
||||
- ESP-LyraT-8311A 的 BT_ADC 管脚
|
||||
- 这两款扩展板可以同时使用。然而，当 ESP-LyraT-8311A 的 BT_ADC 管脚用于初始化扩展板的 6 个按钮时，ESP-LyraP-TouchA 无法成功触发。
|
||||
- 如果计划使用 ESP-LyraT-8311A 的 BT_ADC 管脚，请不要初始化 ESP-LyraP-TouchA 扩展板的 IO6 管脚 (PHOTO)。
|
||||
* - TouchA v1.1 + CAM v1.0
|
||||
- IO1、IO2、IO3
|
||||
- 由于管脚复用无法同时使用。
|
||||
- 不要初始化 ESP-LyraP-TouchA 的 IO1 (VOL_UP)、IO2 (PLAY) 和 IO3 (VOL_DOWN)。
|
||||
* - TouchA v1.1 + LCD32 v1.1 + CAM v1.0
|
||||
- IO1、IO2、IO3、IO6、IO11
|
||||
- 由于管脚复用无法同时使用。
|
||||
- **解决方案 1**：不要初始化 ESP-LyraP-TouchA 扩展板的 IO1 (VOL_UP)、IO2 (PLAY)、IO3 (VOL_DOWN)、IO6 (PHOTO) 和 IO11 (NETWORK)。 **解决方案 2**：用户也可通过以下配置正常初始化 IO6 (PHOTO)：移除 ESP-LyraP-LCD32 扩展板上的 R39，将 R41 换为 100 欧，并将 BLCT_L 开关打开。注意，此配置将导致用户无法通过软件控制显示屏的背光亮度。
|
||||
* - TouchA v1.1 + LCD32 v1.1 + 8311A v1.2
|
||||
- IO6、IO11
|
||||
- IO11 管脚复用导致无法同时使用；IO6 管脚复用导致 ESP-LyraT-8311A 的 BT_ADC 管脚无法使用，因此无法初始化该扩展板的 6 个按钮。
|
||||
- **解决方法 1**：不要初始化 ESP-LyraP-TouchA 扩展板的 IO6 (PHOTO) 和 IO11 (NETWORK)。注意，此时 ESP-LyraT-8311A 的 6 个按钮依然无法使用。**解决方法 2**：移除 ESP-LyraP-LCD32 扩展板上的 R39，将 R41 换为 100 欧，并将 BLCT_L 开关打开。不要初始化 ESP-LyraP-TouchA 的 IO11 (NETWORK)。如果希望使用 ESP-LyraT-8311A 的 6 个按钮，则也不要初始化 IO6 (PHOTO)。
|
||||
|
||||
另外，所有扩展板和 :ref:`JTAG 接口 <jtag-debugging-tip-jtag-pins-reconfigured>` 共用管脚 IO39、IO40、IO41 和 IO42。因此，以下情况可能会干扰 JTAG 操作：
|
||||
|
||||
* 插上扩展板
|
||||
* 调试正在使用扩展板的应用程序
|
||||
|
||||
|
||||
已知问题
|
||||
========
|
||||
|
||||
.. list-table::
|
||||
:widths: 22 24 32 22
|
||||
:header-rows: 1
|
||||
|
||||
* - 问题硬件
|
||||
- 描述
|
||||
- 主要原因
|
||||
- 解决方法
|
||||
* - ESP-LyraP-CAM v1.0、管脚 IO45、管脚 IO46
|
||||
- 当 ESP-LyraP-CAM v1.0 连接至主板时，可能导致主板无法烧录固件。
|
||||
- 开发板上电时，strapping 管脚 IO45 和 IO46 的上电时序错误，导致开发板无法正常启动。
|
||||
- 主板烧录固件时，不应连接该扩展板。
|
||||
* - ESP-LyraP-CAM v1.0、管脚 IO45、管脚 IO46
|
||||
- 使用 Reset 复位按键重启开发板可能无法达到期望结果。
|
||||
- 开发板上电时，strapping 管脚 IO45 和 IO46 的上电时序错误，导致开发板无法正常启动。
|
||||
- v1.2 暂无解决方法。该问题已经在 ESP32-S2-Kaluga-1 V1.3 中进行了修复。
|
||||
* - ESP-LyraT-8311A v1.2、管脚 IO46
|
||||
- 当 ESP-LyraT-8311A v1.2 连接至主板时，可能导致主板无法烧录固件。
|
||||
- 开发板上电时，strapping 管脚 IO46 的上电时序错误，导致开发板无法正常启动。
|
||||
- 主板烧录固件时，不应连接该扩展板。
|
||||
* - ESP-LyraT-8311A v1.2、管脚 IO46
|
||||
- 使用 Reset 复位按键重启开发板可能无法达到期望结果。
|
||||
- 开发板上电时，strapping 管脚 IO46 的上电时序错误，导致开发板无法正常启动。
|
||||
- v1.2 暂无解决方法。该问题已经在 ESP32-S2-Kaluga-1 V1.3 中进行了修复。
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
尚无版本升级历史。
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-esp-lyrap-cam-v1.0
|
||||
user-guide-esp-lyrap-lcd32-v1.1
|
||||
user-guide-esp-lyrap-toucha-v1.1
|
||||
user-guide-esp-lyrat-8311a_v1.2
|
||||
|
||||
- `ESP32-S2-WROVER 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_cn.pdf>`_ (PDF)
|
||||
- `乐鑫产品选型工具 <https://products.espressif.com/#/product-selector?names=>`__
|
||||
- :doc:`../../api-guides/jtag-debugging/index`
|
||||
|
||||
- `ESP32-S2-Kaluga-1 原理图 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_2_SCH_20200424A.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_2_PCB_20200325AF.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 管脚映射 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1.2_Pin-Mapping.xlsx>`_ (Excel)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
@ -1,395 +0,0 @@
|
||||
==============================
|
||||
ESP32-S2-Kaluga-1 套件 v1.3
|
||||
==============================
|
||||
|
||||
:link_to_translation:`en:[English]`
|
||||
|
||||
更早版本：:doc:`user-guide-esp32-s2-kaluga-1-kit-v1.2`
|
||||
|
||||
ESP32-S2-Kaluga-1 v1.3 是一款来自乐鑫的开发套件，主要可用于以下目的：
|
||||
|
||||
- 展示 ESP32-S2 芯片的人机交互功能
|
||||
- 为用户提供基于 ESP32-S2 的人机交互应用开发工具
|
||||
|
||||
ESP32-S2 的功能强大，应用场景非常丰富。对于初学者来说，可能的用例包括：
|
||||
|
||||
- **智能家居**：从最简单的智能照明、智能门锁、智能插座，到更复杂的视频流设备、安防摄像头、OTT 设备和家用电器等
|
||||
- **电池供电设备**：Wi-Fi mesh 传感器网络、Wi-Fi 网络玩具、可穿戴设备、健康管理设备等
|
||||
- **工业自动化设备**：无线控制与机器人技术、智能照明、HVAC 控制设备等
|
||||
- **零售和餐饮业**：POS 机和服务机器人
|
||||
|
||||
.. Image of v1.2 is used as there are no visual changes
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-kit-v1.0-3d.png
|
||||
:align: center
|
||||
:width: 3452px
|
||||
:height: 1590px
|
||||
:scale: 20%
|
||||
:alt: ESP32-S2-Kaluga-1-Kit-Assembly
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1-Kit 概述（点击放大）
|
||||
|
||||
|
||||
ESP32-S2-Kaluga-1 套件包括以下几个开发板：
|
||||
|
||||
- 主板：*ESP32-S2-Kaluga-1*
|
||||
- 扩展板：
|
||||
|
||||
- :doc:`user-guide-esp-lyrat-8311a_v1.3` - 音频播放器
|
||||
- :doc:`user-guide-esp-lyrap-toucha-v1.1` - 触摸板
|
||||
- :doc:`user-guide-esp-lyrap-lcd32-v1.2` - 3.2" LCD 屏
|
||||
- :doc:`user-guide-esp-lyrap-cam-v1.1` - 摄像头
|
||||
|
||||
由于 ESP32-S2 的管脚复用，部分扩展板的兼容性有所限制，具体请见 :ref:`user-guide-esp32-s2-kaluga-1-kit-ext-board-compatibility`。
|
||||
|
||||
本文档主要介绍 **ESP32-S2-Kaluga-1 主板** 及其与扩展板的交互。更多有关具体扩展板的信息，请点击相应的链接。
|
||||
|
||||
本指南包括：
|
||||
|
||||
- `快速入门`_：提供 ESP32-S2-Kaluga-1 的简要概述及必须了解的硬件和软件信息。
|
||||
- `硬件参考`_：提供 ESP32-S2-Kaluga-1 的详细硬件信息。
|
||||
- `硬件修订历史`_：提供该开发版的“修订历史”、“已知问题”以及此前版本开发板的用户指南链接。
|
||||
- `相关文档`_：提供相关文档的链接。
|
||||
|
||||
|
||||
快速入门
|
||||
========
|
||||
|
||||
本节介绍如何开始使用 ESP32-S2-Kaluga-1，主要包括三大部分：首先，介绍一些关于 ESP32-S2-Kaluga-1 的基本信息；然后，在 `应用程序开发`_ 章节介绍如何进行硬件初始化；最后，介绍如何为 ESP32-S2-Kaluga-1 烧录固件。
|
||||
|
||||
|
||||
概述
|
||||
----
|
||||
|
||||
ESP32-S2-Kaluga-1 主板是整个套件的核心。该主板集成了 ESP32-S2-WROVER 模组，并配备连接至各个扩展板的连接器。ESP32-S2-Kaluga-1 是人机交互接口原型设计的关键工具。
|
||||
|
||||
ESP32-S2-Kaluga-1 主板配备了多个连接器，可用于连接相应扩展板：
|
||||
|
||||
- 扩展板连接器，用于连接 ESP-LyraT-8311A、ESP-LyraP-LCD32
|
||||
- 摄像头连接器，用于连接 ESP-LyraP-CAM
|
||||
- 触摸 FPC 连接器，用于连接 ESP-LyraP-TouchA
|
||||
- LCD FPC 连接器（尚无可用官方配套扩展板）
|
||||
- I2C FPC 连接器（尚无可用官方配套扩展板）
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32s2-kaluga-1-v1.3-3d.png
|
||||
:align: center
|
||||
:width: 3089px
|
||||
:height: 2335px
|
||||
:scale: 25%
|
||||
:alt: ESP32-S2-Kaluga-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1（点击放大）
|
||||
|
||||
所有四个扩展板都经过特别设计，以支持以下功能：
|
||||
|
||||
* 触摸板控制
|
||||
* 带有 6 个触摸按钮
|
||||
* 支持最大 5 mm 亚克力板
|
||||
* 支持湿手操作
|
||||
* 支持防水功能。ESP32-S2 可以配置为在多个触摸板同时被水复盖时自动禁用所有触摸板功能，并在去除水滴后重新启用触摸板
|
||||
|
||||
* 音频播放
|
||||
* 连接扬声器，以播放音频
|
||||
* 配合触控板使用，可控制音频播放和调节音量
|
||||
|
||||
* LCD 显示屏
|
||||
* LCD 接口（8 位并行 RGB、8080 和 6800 接口）
|
||||
|
||||
* 摄像头图像采集
|
||||
* 支持 OV2640 和 OV3660 摄像头模块
|
||||
* 8-bit DVP 图像传感器接口（ESP32-S2 还支持 16 位 DVP 图像传感器，但需要你自行进行二次开发）
|
||||
* 支持高达 40 MHz 时钟频率
|
||||
* 优化 DMA 传输带宽，便于传输高分辨率图像
|
||||
|
||||
|
||||
组件描述
|
||||
--------
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.3-layout-front.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 645px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - 正面
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - 正面（点击放大）
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.3-layout-back.png
|
||||
:align: center
|
||||
:width: 934px
|
||||
:height: 600px
|
||||
:scale: 70%
|
||||
:alt: ESP32-S2-Kaluga-1 - 反面
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - 反面（点击放大）
|
||||
|
||||
|
||||
下表将从左边的 ESP32-S2 模组开始，以顺时针顺序介绍上图中的主要组件。
|
||||
|
||||
**保留** 表示该功能可用，但当前版本的套件并未启用该功能。
|
||||
|
||||
|
||||
.. list-table::
|
||||
:widths: 30 70
|
||||
:header-rows: 1
|
||||
|
||||
* - 主要组件
|
||||
- 描述
|
||||
* - ESP32-S2-WROVER 模组
|
||||
- 集成 ESP32-S2 芯片，可提供 Wi-Fi 连接、数据处理和灵活的数据存储功能。
|
||||
* - 4.3" LCD FPC 连接器
|
||||
- （保留）可使用 FPC 线连接 4.3" LCD 扩展板。
|
||||
* - ESP Prog 连接器
|
||||
- （保留）用于连接乐鑫固件烧录设备 (ESP-Prog)。
|
||||
* - JTAG 开关
|
||||
- 切换到 ON 方向，启用 ESP32-S2 和 FT2232 之间的连接。此时，可通过 USB-UART/JTAG 端口进行 JTAG 调试，详见 :doc:`../../api-guides/jtag-debugging/index`。
|
||||
* - 引出管脚排针 2
|
||||
- ESP32-S2-WROVER 模组的部分 GPIO 直接引出至该开发板（详见开发板上的标记）。
|
||||
* - USB-to-UART/JTAG 桥接器
|
||||
- FT2232 适配器开发板，允许在 USB 端口使用 UART/JTAG 协议通信。
|
||||
* - 摄像头连接器
|
||||
- 用于连接摄像头扩展板，比如 ESP-LyraP-CAM。
|
||||
* - 扩展板连接器
|
||||
- 用于连接带有配套连接器的扩展板。
|
||||
* - Reset 复位按钮
|
||||
- 用于重启系统。
|
||||
* - Boot 按钮
|
||||
- 按下 **Boot** 键并保持，同时按一下 **Reset** 键，进入“固件下载”模式，通过串口下载固件。
|
||||
* - USB-UART/JTAG 端口
|
||||
- PC 和 ESP32-S2 模组之间的通信接口（UART 或 JTAG）。
|
||||
* - USB 电源端口
|
||||
- 为开发板供电。
|
||||
* - 电池端口
|
||||
- 2 针连接器，用于连接外部电池。
|
||||
* - 电源 LED 指示灯
|
||||
- 当 USB 电源或外部电源供电电压正常，则 LED 亮起。
|
||||
* - 电源开关
|
||||
- 打开可为系统供电。
|
||||
* - RGB 跳线
|
||||
- 如需使用 RGB LED，需在该位置增加一个跳线。
|
||||
* - RGB LED 指示灯
|
||||
- 可编程 RGB LED 指示灯，受控于 GPIO45。在使用前需要安装 RGB 跳线。
|
||||
* - 调压器
|
||||
- 5 V 转 3.3 V 调压器。
|
||||
* - I2C FPC 连接器
|
||||
- （保留）可通过 FPC 线连接其他 I2C 扩展板。
|
||||
* - 引出管脚排针 1
|
||||
- ESP32-S2-WROVER 模组的部分 GPIO 直接引出至该开发板（详见开发板上的标记）。
|
||||
* - 触摸 FPC 连接器
|
||||
- 可通过 FPC 线连接 ESP-LyraP-TouchA 扩展板。
|
||||
* - 触摸开关
|
||||
- 切换到 OFF 方向，配置 GPIO1 到 GPIO14 连接触摸传感器；切换到 ON 方向，配置 GPIO1 到 GPIO14 用于其他目的。
|
||||
* - 3.2" LCD FPC 连接器
|
||||
- 可通过 FPC 线连接 3.2" LCD 扩展板，比如 ESP-LyraP-LCD32。
|
||||
|
||||
|
||||
应用程序开发
|
||||
------------
|
||||
|
||||
ESP32-S2-Kaluga-1 上电前，请首先确认开发板完好无损。
|
||||
|
||||
|
||||
硬件准备
|
||||
^^^^^^^^
|
||||
|
||||
- ESP32-S2-Kaluga-1
|
||||
- 两根 USB 2.0 电缆（标准 A 转 Micro-B)
|
||||
|
||||
- 电源选项
|
||||
- 用于 UART/JTAG 通信
|
||||
|
||||
- PC（Windows、Linux 或 macOS）
|
||||
- 你选择的任何扩展板
|
||||
|
||||
|
||||
硬件设置
|
||||
^^^^^^^^
|
||||
|
||||
1. 连接你选择的扩展板（更多信息，请见对应拓展板的用户指南）
|
||||
2. 插入两根 USB 电缆
|
||||
3. 打开 **电源开关** 时，**电源 LED 指示灯** 应点亮。
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-software-setup:
|
||||
|
||||
软件设置
|
||||
^^^^^^^^
|
||||
|
||||
请前往 :doc:`../../get-started/index`，在 :ref:`get-started-step-by-step` 一节查看如何快速设置开发环境。
|
||||
|
||||
你还可以点击 `这里 <https://github.com/espressif/esp-dev-kits/tree/master/esp32-s2-kaluga-1>`_，获取有关 ESP32-S2-Kaluga-1 套件编程指南与应用示例的更多内容。
|
||||
|
||||
你可以在 `IDF 组件注册器 <https://components.espressif.com>`_ 中下载板级支持包 (BSP)。
|
||||
|
||||
|
||||
内容和包装
|
||||
----------
|
||||
|
||||
零售订单
|
||||
^^^^^^^^
|
||||
|
||||
每一个零售 ESP32-S2-Kaluga-1 开发套件均有独立包装。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32s2-kaluga-1-kit-v1.3-package-3d.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 - 包装
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 - 包装
|
||||
|
||||
|
||||
内含以下部分：
|
||||
|
||||
- 主板
|
||||
- ESP32-S2-Kaluga-1
|
||||
- 扩展板：
|
||||
- ESP-LyraT-8311A
|
||||
- ESP-LyraP-CAM
|
||||
- ESP-LyraP-TouchA
|
||||
- ESP-LyraP-LCD32
|
||||
- 连接器
|
||||
- 20 针 FPC 线（用于连接 ESP32-S2-Kaluga-1 主板至 ESP-LyraP-TouchA 扩展板）
|
||||
- 紧固件
|
||||
- 安装螺栓 (x 8)
|
||||
- 螺丝 (x 4)
|
||||
- 螺母 (x 4)
|
||||
|
||||
零售购买，请前往 https://www.espressif.com/zh-hans/contact-us/get-samples。
|
||||
|
||||
|
||||
批发订单
|
||||
^^^^^^^^
|
||||
|
||||
ESP32-S2-Kaluga-1 开发套件的批发包装为纸板箱。
|
||||
|
||||
批量订单请前往 https://www.espressif.com/zh-hans/contact-us/sales-questions。
|
||||
|
||||
|
||||
硬件参考
|
||||
========
|
||||
|
||||
功能框图
|
||||
--------
|
||||
|
||||
.. Image of v1.2 is used as there are no visual changes
|
||||
|
||||
ESP32-S2-Kaluga-1 的主要组件和连接方式如下图所示。
|
||||
|
||||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-block-diagram.png
|
||||
:align: center
|
||||
:alt: ESP32-S2-Kaluga-1 功能框图
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-S2-Kaluga-1 功能框图
|
||||
|
||||
|
||||
电源选项
|
||||
--------
|
||||
|
||||
开发板可任一选用以下四种供电方式：
|
||||
|
||||
- Micro USB 端口供电（默认）
|
||||
- 通过 2 针电池连接器使用外部电池供电
|
||||
- 5V / GND 管脚供电
|
||||
- 3V3 / GND 管脚供电
|
||||
|
||||
|
||||
.. _user-guide-esp32-s2-kaluga-1-kit-ext-board-compatibility:
|
||||
|
||||
扩展板的兼容性
|
||||
--------------
|
||||
|
||||
如需同时使用多块扩展板，请首先查看以下兼容性信息：
|
||||
|
||||
.. list-table::
|
||||
:widths: 20 15 33 32
|
||||
:header-rows: 1
|
||||
|
||||
* - 扩展板组合
|
||||
- 复用接口或管脚
|
||||
- 无法运行原因
|
||||
- 解决方案
|
||||
* - 8311A v1.3 + CAM v1.1
|
||||
- I2S 控制器
|
||||
- ESP32-S2 仅有 1 个 I2S 接口，但这两个开发板均需使用 ESP32-S2 的 I2S 接口进行通信（ESP-LyraT-8311A 使用标准模式；ESP-LyraP-CAM 使用 Camera 协议）。
|
||||
- 采用分时复用；或另外选择一款可以通过其他 GPIOs 或 DAC 连接的音频扩展板。
|
||||
* - TouchA v1.1 + LCD32 v1.2
|
||||
- IO11、IO6
|
||||
- 由于管脚 IO11 复用，导致无法触发触摸动作；ESP-LyraP-LCD32 则由于其 BLCT 管脚已与 IO6 断开，因此不受影响。
|
||||
- 不要初始化 ESP-LyraP-TouchA 扩展板的 IO11 (NETWORK) 管脚；或者配置 ESP-LyraP-LCD32 扩展板的 BLCT 管脚为 `-1` （相当于不使用 BLCT）。
|
||||
* - 8311A v1.3 + LCD32 v1.2
|
||||
- IO6
|
||||
- 配置 ESP-LyraP-LCD32 扩展板的 BK 管脚为 `-1` （相当于不使用 BK）。
|
||||
- ESP32-S2-Kaluga-1 的 BLCT 管脚将从 IO6 断开。
|
||||
* - TouchA v1.1 + 8311A v1.3
|
||||
- ESP-LyraT-8311A 的 BT_ADC 管脚
|
||||
- ESP-LyraT-8311A 在初始化 6 个按钮时需要使用 BT_ADC 管脚，而 ESP-LyraP-TouchA 在完成触摸动作时也需要使用 BT_ADC 管脚。
|
||||
- 如需使用 ESP-LyraT-8311A 的 6 个按钮，则不要初始化 ESP-LyraP-TouchA 的 IO6 (PHOTO) 管脚。
|
||||
* - TouchA v1.1 + CAM v1.1
|
||||
- IO1、IO2、IO3
|
||||
- 由于管脚复用无法同时使用。
|
||||
- 不要初始化 ESP-LyraP-TouchA 的 IO1 (VOL_UP)、IO2 (PLAY) 和 IO3 (VOL_DOWN)。
|
||||
* - TouchA v1.1 + LCD32 v1.2 + CAM v1.1
|
||||
- IO1、IO2、IO3、IO11
|
||||
- 由于管脚复用无法同时使用。
|
||||
- 不要初始化 ESP-LyraP-TouchA 的 IO1 (VOL_UP)、IO2 (PLAY)、IO3 (VOL_DOWN) 和 IO11 (NETWORK)。
|
||||
* - TouchA v1.1 + LCD32 v1.2 + 8311A v1.3
|
||||
- IO6、IO11
|
||||
- 如果使用 ESP-LyraT-8311A 的 BT_ADC 管脚初始化开发板的 6 个按钮，其他扩展板则无法使用 IO6 和 IO11。
|
||||
- 不要初始化 ESP-LyraP-TouchA 的 IO11 (NETWORK)。此外，如果需要使用 BT_ADC，则不要初始化 IO6 (PHOTO)。
|
||||
|
||||
另外，所有扩展板和 :ref:`JTAG 接口 <jtag-debugging-tip-jtag-pins-reconfigured>` 共用管脚 IO39、IO40、IO41 和 IO42。因此，以下情况可能会干扰 JTAG 操作：
|
||||
|
||||
* 插上扩展板
|
||||
* 调试正在使用扩展板的应用程序
|
||||
|
||||
|
||||
硬件修订历史
|
||||
============
|
||||
|
||||
ESP32-S2-Kaluga-1 Kit v1.3
|
||||
--------------------------
|
||||
|
||||
* 以下管脚已重新分配，以解决固件烧录问题：
|
||||
|
||||
* Camera D2：GPIO36
|
||||
* Camera D3：GPIO37
|
||||
* AU_I2S1_SDI：GPIO34
|
||||
* AU_WAKE_INT：GPIO46
|
||||
|
||||
* RGB 已移动至开发板边缘
|
||||
* 所有 dip 开关均移动至开发板的反面，从而便利用户操作
|
||||
|
||||
|
||||
ESP32-S2-Kaluga-1 Kit v1.2
|
||||
--------------------------
|
||||
|
||||
:doc:`首次发布 <user-guide-esp32-s2-kaluga-1-kit-v1.2>`
|
||||
|
||||
|
||||
相关文档
|
||||
========
|
||||
|
||||
.. toctree::
|
||||
:hidden:
|
||||
|
||||
user-guide-esp32-s2-kaluga-1-kit-v1.2.rst
|
||||
user-guide-esp-lyrap-cam-v1.1
|
||||
user-guide-esp-lyrap-lcd32-v1.2
|
||||
user-guide-esp-lyrat-8311a_v1.3
|
||||
|
||||
- `ESP32-S2-WROVER 技术规格书 <https://www.espressif.com/sites/default/files/documentation/esp32-s2-wrover_esp32-s2-wrover-i_datasheet_cn.pdf>`_ (PDF)
|
||||
- `乐鑫产品选型工具 <https://products.espressif.com/#/product-selector?names=>`__
|
||||
- :doc:`../../api-guides/jtag-debugging/index`
|
||||
|
||||
- `ESP32-S2-Kaluga-1 原理图 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_3_SCH_20200526A.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 PCB 布局图 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1_3_PCB_20200526AE.pdf>`_ (PDF)
|
||||
- `ESP32-S2-Kaluga-1 管脚映射 <https://dl.espressif.com/dl/schematics/ESP32-S2-Kaluga-1_V1.3-Pin-Mapping-v0.1.xlsx>`_ (Excel)
|
||||
|
||||
有关本开发板的更多设计文档，请联系我们的商务部门 sales@espressif.com。
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user