mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
Merge branch 'chip/esp32c5_mp_support_wifi' into 'master'
esp32c5 mp support wifi Closes IDF-9139 and IDF-10529 See merge request espressif/esp-idf!31901
This commit is contained in:
Xu Xiao
commit
7b5014a02f
@ -1 +1 @@
|
||||
Subproject commit d99dfd1883a1468b8986362a1382a4f46e918b60
|
||||
Subproject commit 3880b604ad7529c91fb4173da479dd9713ce1f66
|
||||
@ -182,7 +182,6 @@ else() # Regular app build
|
||||
rom_linker_script("coexist")
|
||||
rom_linker_script("net80211")
|
||||
rom_linker_script("pp")
|
||||
|
||||
elseif(target STREQUAL "esp32c5")
|
||||
# esp32c5.rom.api.ld has been split to several lds by components.
|
||||
# esp32c5.rom.api.ld is still reserved to map the APIs
|
||||
|
||||
@ -65,7 +65,7 @@ wifi_get_macaddr = 0x40000bc4;
|
||||
wifi_rf_phy_disable = 0x40000bc8;
|
||||
wifi_rf_phy_enable = 0x40000bcc;
|
||||
wifi_is_started = 0x40000bd0;
|
||||
sta_input = 0x40000bd4;
|
||||
/*sta_input = 0x40000bd4;*/
|
||||
sta_rx_eapol = 0x40000bd8;
|
||||
sta_reset_beacon_timeout = 0x40000bdc;
|
||||
sta_get_beacon_timeout = 0x40000be0;
|
||||
|
||||
@ -32,7 +32,7 @@ hal_mac_tx_clr_mplen = 0x40000c10;
|
||||
hal_mac_get_txq_state = 0x40000c14;
|
||||
hal_mac_clr_txq_state = 0x40000c18;
|
||||
hal_mac_get_txq_complete = 0x40000c1c;
|
||||
hal_mac_deinit_twt_tx = 0x40000c20;
|
||||
/*hal_mac_deinit_twt_tx = 0x40000c20;*/
|
||||
hal_mac_is_dma_enable = 0x40000c24;
|
||||
hal_he_get_bss_color = 0x40000c28;
|
||||
hal_he_set_ersu = 0x40000c2c;
|
||||
@ -62,7 +62,7 @@ ic_get_he_rts_threshold_bytes = 0x40000c88;
|
||||
lmacAdjustTimestamp = 0x40000c8c;
|
||||
lmacDiscardAgedMSDU = 0x40000c90;
|
||||
lmacDiscardMSDU = 0x40000c94;
|
||||
lmacEndFrameExchangeSequence = 0x40000c98;
|
||||
/*lmacEndFrameExchangeSequence = 0x40000c98;*/
|
||||
lmacIsIdle = 0x40000c9c;
|
||||
lmacIsLongFrame = 0x40000ca0;
|
||||
lmacMSDUAged = 0x40000ca4;
|
||||
@ -81,12 +81,12 @@ lmacDisableTransmit = 0x40000cd4;
|
||||
lmacDiscardFrameExchangeSequence = 0x40000cd8;
|
||||
lmacProcessCollision = 0x40000cdc;
|
||||
lmacProcessAckTimeout = 0x40000ce0;
|
||||
lmacProcessShortRetryFail = 0x40000ce4;
|
||||
/*lmacProcessShortRetryFail = 0x40000ce4;*/
|
||||
lmacProcessCollisions_task = 0x40000ce8;
|
||||
lmacProcessTxRtsError = 0x40000cec;
|
||||
lmacProcessTxError = 0x40000cf0;
|
||||
lmacProcessCtsTimeout = 0x40000cf4;
|
||||
lmacProcessLongRetryFail = 0x40000cf8;
|
||||
/*lmacProcessLongRetryFail = 0x40000cf8;*/
|
||||
lmacRetryTxFrame = 0x40000cfc;
|
||||
lmacEndRetryAMPDUFail = 0x40000d00;
|
||||
lmacProcessTxSuccess = 0x40000d04;
|
||||
@ -129,7 +129,7 @@ pm_on_isr_set_twt_target = 0x40000d94;
|
||||
pm_on_isr_twt_wake = 0x40000d98;
|
||||
pm_on_tsf_timer = 0x40000d9c;
|
||||
pm_on_twt_force_tx = 0x40000da0;
|
||||
pm_parse_beacon = 0x40000da4;
|
||||
/*pm_parse_beacon = 0x40000da4;*/
|
||||
pm_process_tim = 0x40000da8;
|
||||
pm_rx_beacon_process = 0x40000dac;
|
||||
pm_rx_data_process = 0x40000db0;
|
||||
@ -145,13 +145,13 @@ pm_disconnected_wake = 0x40000dd4;
|
||||
/*pm_tx_data_process = 0x40000dd8;*/
|
||||
pm_is_twt_awake = 0x40000ddc;
|
||||
pm_enable_twt_keep_alive = 0x40000de0;
|
||||
pm_twt_on_tsf_timer = 0x40000de4;
|
||||
/*pm_twt_on_tsf_timer = 0x40000de4;*/
|
||||
pm_twt_process = 0x40000de8;
|
||||
pm_is_twt_start = 0x40000dec;
|
||||
pm_twt_set_target_wdev_time = 0x40000df0;
|
||||
pm_twt_set_target_tsf = 0x40000df4;
|
||||
pm_enable_twt_keep_alive_timer = 0x40000df8;
|
||||
pm_mac_try_enable_modem_state = 0x40000dfc;
|
||||
/*pm_mac_try_enable_modem_state = 0x40000dfc;*/
|
||||
pm_beacon_monitor_tbtt_timeout_process = 0x40000e00;
|
||||
/*pm_update_next_tbtt = 0x40000e04;*/
|
||||
pm_twt_disallow_tx = 0x40000e08;
|
||||
@ -209,11 +209,11 @@ ppDisableQueue = 0x40000ed4;
|
||||
ppCalVHTDeliNum = 0x40000ed8;
|
||||
ppCalTxVHTSMPDULength = 0x40000edc;
|
||||
ppCheckTxRTS = 0x40000ee0;
|
||||
ppProcessLifeTime = 0x40000ee4;
|
||||
/*ppProcessLifeTime = 0x40000ee4;*/
|
||||
ppProcTxCallback = 0x40000ee8;
|
||||
ppCalPreFecPaddingFactor = 0x40000eec;
|
||||
ppCalDeliNum = 0x40000ef0;
|
||||
ppRemoveHTC = 0x40000ef4;
|
||||
/*ppRemoveHTC = 0x40000ef4;*/
|
||||
ppCheckTxHEAMPDUlength = 0x40000ef8;
|
||||
ppCertSetRate = 0x40000efc;
|
||||
ppSelectTxFormat = 0x40000f00;
|
||||
@ -236,10 +236,10 @@ rcGetSched = 0x40000f40;
|
||||
rcLowerSched = 0x40000f44;
|
||||
rcSetTxAmpduLimit = 0x40000f48;
|
||||
rcTxUpdatePer = 0x40000f4c;
|
||||
rcUpdateAckSnr = 0x40000f50;
|
||||
/*rcUpdateAckSnr = 0x40000f50;*/
|
||||
rcUpdateRate = 0x40000f54;
|
||||
rcUpdateTxDone = 0x40000f58;
|
||||
rcUpdateTxDoneAmpdu2 = 0x40000f5c;
|
||||
/*rcUpdateTxDone = 0x40000f58;*/
|
||||
/*rcUpdateTxDoneAmpdu2 = 0x40000f5c;*/
|
||||
rcUpSched = 0x40000f60;
|
||||
rcReachRetryLimit = 0x40000f64;
|
||||
rcGetDCMMaxRate = 0x40000f68;
|
||||
@ -264,7 +264,7 @@ wDevCheckBlockError = 0x40000fac;
|
||||
wDev_DiscardFrame = 0x40000fb4;
|
||||
wDev_GetNoiseFloor = 0x40000fb8;
|
||||
wDev_IndicateAmpdu = 0x40000fbc;
|
||||
wDev_IndicateFrame = 0x40000fc0;
|
||||
/*wDev_IndicateFrame = 0x40000fc0;*/
|
||||
wdev_mac_reg_load = 0x40000fc4;
|
||||
wdev_mac_reg_store = 0x40000fc8;
|
||||
wdev_mac_special_reg_load = 0x40000fcc;
|
||||
|
||||
@ -430,6 +430,7 @@ typedef struct {
|
||||
int mubar;
|
||||
int bfrp;
|
||||
int nfrp;
|
||||
int bar;
|
||||
} esp_test_rx_ctrl_t;
|
||||
|
||||
typedef enum {
|
||||
|
||||
@ -397,7 +397,7 @@ esp_err_t esp_wifi_get_mode(wifi_mode_t *mode);
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the wifi related config is correct
|
||||
* - ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the WiFi related config is correct
|
||||
* - ESP_ERR_NO_MEM: out of memory
|
||||
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
|
||||
* - ESP_FAIL: other WiFi internal errors
|
||||
@ -511,7 +511,7 @@ esp_err_t esp_wifi_deauth_sta(uint16_t aid);
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start
|
||||
* - ESP_ERR_WIFI_TIMEOUT: blocking scan is timeout
|
||||
* - ESP_ERR_WIFI_STATE: wifi still connecting when invoke esp_wifi_scan_start
|
||||
* - ESP_ERR_WIFI_STATE: WiFi still connecting when invoke esp_wifi_scan_start
|
||||
* - others: refer to error code in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_scan_start(const wifi_scan_config_t *config, bool block);
|
||||
@ -630,7 +630,7 @@ esp_err_t esp_wifi_scan_get_ap_record(wifi_ap_record_t *ap_record);
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
|
||||
* - ESP_ERR_WIFI_MODE: WiFi mode is wrong
|
||||
* - ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the wifi related config is correct
|
||||
* - ESP_ERR_INVALID_ARG: It doesn't normally happen, the function called inside the API was passed invalid argument, user should check if the WiFi related config is correct
|
||||
*/
|
||||
esp_err_t esp_wifi_clear_ap_list(void);
|
||||
|
||||
@ -676,19 +676,23 @@ esp_err_t esp_wifi_get_ps(wifi_ps_type_t *type);
|
||||
/**
|
||||
* @brief Set protocol type of specified interface
|
||||
* The default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N).
|
||||
* if CONFIG_SOC_WIFI_HE_SUPPORT and band is 2.4G, the default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AX).
|
||||
* if CONFIG_SOC_WIFI_HE_SUPPORT and band is 5G, the default protocol is (WIFI_PROTOCOL_11A|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AC|WIFI_PROTOCOL_11AX).
|
||||
* if CONFIG_SOC_WIFI_HE_SUPPORT and band mode is 2.4G, the default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AX).
|
||||
* if CONFIG_SOC_WIFI_HE_SUPPORT_5G and band mode is 5G, the default protocol is (WIFI_PROTOCOL_11A|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AC|WIFI_PROTOCOL_11AX).
|
||||
*
|
||||
* @attention 2.4G: Support 802.11b or 802.11bg or 802.11bgn or 802.11bgnax or LR mode
|
||||
* 5G: Support 802.11a or 802.11an or 802.11anac or 802.11anacax
|
||||
* @attention 1. When WiFi band mode is 2.4G only, support 802.11b or 802.11bg or 802.11bgn or 802.11bgnax or LR mode
|
||||
* @attention 2. When WiFi band mode is 5G only, support 802.11a or 802.11an or 802.11anac or 802.11anacax
|
||||
* @attention 3. Can not set WiFi protocol under band mode 2.4G + 5G (WIFI_BAND_MODE_AUTO), you can use esp_wifi_set_protocols instead
|
||||
* @attention 4. API return ESP_ERR_NOT_SUPPORTED if the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
*
|
||||
* @param ifx interfaces
|
||||
* @param ifx interface
|
||||
* @param protocol_bitmap WiFi protocol bitmap
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - ESP_ERR_NOT_SUPPORTED: This API is not supported when the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap);
|
||||
@ -696,6 +700,11 @@ esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap);
|
||||
/**
|
||||
* @brief Get the current protocol bitmap of the specified interface
|
||||
*
|
||||
* @attention 1. When WiFi band mode is 2.4G only, it will return the protocol supported in the 2.4G band
|
||||
* @attention 2. When WiFi band mode is 5G only, it will return the protocol supported in the 5G band
|
||||
* @attention 3. Can not get WiFi protocol under band mode 2.4G + 5G (WIFI_BAND_MODE_AUTO), you can use esp_wifi_get_protocols instead
|
||||
* @attention 4. API return ESP_ERR_NOT_SUPPORTED if the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
*
|
||||
* @param ifx interface
|
||||
* @param[out] protocol_bitmap store current WiFi protocol bitmap of interface ifx
|
||||
*
|
||||
@ -704,6 +713,7 @@ esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap);
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - ESP_ERR_NOT_SUPPORTED: This API is not supported when the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap);
|
||||
@ -711,8 +721,10 @@ esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap);
|
||||
/**
|
||||
* @brief Set the bandwidth of specified interface
|
||||
*
|
||||
* @attention 1. API return false if try to configure an interface that is not enabled
|
||||
* @attention 2. WIFI_BW_HT40 is supported only when the interface support 11N
|
||||
* @attention 1. WIFI_BW_HT40 is supported only when the interface support 11N
|
||||
* @attention 2. When the interface supports 11AX/11AC, it only supports setting WIFI_BW_HT20.
|
||||
* @attention 3. Can not set WiFi bandwidth under band mode 2.4G + 5G (WIFI_BAND_MODE_AUTO), you can use esp_wifi_set_bandwidths instead
|
||||
* @attention 4. API return ESP_ERR_NOT_SUPPORTED if the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
*
|
||||
* @param ifx interface to be configured
|
||||
* @param bw bandwidth
|
||||
@ -722,6 +734,7 @@ esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap);
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - ESP_ERR_NOT_SUPPORTED: This API is not supported when the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw);
|
||||
@ -729,7 +742,8 @@ esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw);
|
||||
/**
|
||||
* @brief Get the bandwidth of specified interface
|
||||
*
|
||||
* @attention 1. API return false if try to get a interface that is not enable
|
||||
* @attention 1. Can not get WiFi bandwidth under band mode 2.4G + 5G (WIFI_BAND_MODE_AUTO), you can use esp_wifi_get_bandwidths instead
|
||||
* @attention 2. API return ESP_ERR_NOT_SUPPORTED if the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
*
|
||||
* @param ifx interface to be configured
|
||||
* @param[out] bw store bandwidth of interface ifx
|
||||
@ -739,6 +753,7 @@ esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw);
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - ESP_ERR_NOT_SUPPORTED: This API is not supported when the band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
*/
|
||||
esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw);
|
||||
|
||||
@ -749,8 +764,8 @@ esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw);
|
||||
* @attention 2. When device is in STA mode, this API should not be called when STA is scanning or connecting to an external AP
|
||||
* @attention 3. When device is in softAP mode, this API should not be called when softAP has connected to external STAs
|
||||
* @attention 4. When device is in STA+softAP mode, this API should not be called when in the scenarios described above
|
||||
* @attention 5. The channel info set by this API will not be stored in NVS. So If you want to remember the channel used before wifi stop,
|
||||
* you need to call this API again after wifi start, or you can call `esp_wifi_set_config()` to store the channel info in NVS.
|
||||
* @attention 5. The channel info set by this API will not be stored in NVS. So If you want to remember the channel used before WiFi stop,
|
||||
* you need to call this API again after WiFi start, or you can call `esp_wifi_set_config()` to store the channel info in NVS.
|
||||
*
|
||||
* @param primary for HT20, primary is the channel number, for HT40, primary is the primary channel
|
||||
* @param second for HT20, second is ignored, for HT40, second is the second channel
|
||||
@ -1089,7 +1104,7 @@ esp_err_t esp_wifi_set_vendor_ie_cb(esp_vendor_ie_cb_t cb, void *ctx);
|
||||
/**
|
||||
* @brief Set maximum transmitting power after WiFi start.
|
||||
*
|
||||
* @attention 1. Maximum power before wifi startup is limited by PHY init data bin.
|
||||
* @attention 1. Maximum power before WiFi startup is limited by PHY init data bin.
|
||||
* @attention 2. The value set by this API will be mapped to the max_tx_power of the structure wifi_country_t variable.
|
||||
* @attention 3. Mapping Table {Power, max_tx_power} = {{8, 2}, {20, 5}, {28, 7}, {34, 8}, {44, 11},
|
||||
* {52, 13}, {56, 14}, {60, 15}, {66, 16}, {72, 18}, {80, 20}}.
|
||||
@ -1602,11 +1617,16 @@ esp_err_t esp_wifi_set_dynamic_cs(bool enabled);
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_get_rssi(int *rssi);
|
||||
|
||||
#if SOC_WIFI_HE_SUPPORT_5G
|
||||
/**
|
||||
* @brief Set wifi band.
|
||||
* @brief Set WiFi current band.
|
||||
*
|
||||
* @param[in] band wifi band 2.4G / 5G / 2.4G + 5G
|
||||
* @attention 1. This API is only operational when the WiFi band mode is configured to 2.4G + 5G (WIFI_BAND_MODE_AUTO)
|
||||
* @attention 2. When device is in STA mode, this API should not be called when STA is scanning or connecting to an external AP
|
||||
* @attention 3. When device is in softAP mode, this API should not be called when softAP has connected to external STAs
|
||||
* @attention 4. When device is in STA+softAP mode, this API should not be called when in the scenarios described above
|
||||
* @attention 5. It is recommended not to use this API. If you want to change the current band, you can use esp_wifi_set_channel instead.
|
||||
*
|
||||
* @param[in] band WiFi band 2.4G / 5G
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
@ -1616,9 +1636,9 @@ esp_err_t esp_wifi_sta_get_rssi(int *rssi);
|
||||
esp_err_t esp_wifi_set_band(wifi_band_t band);
|
||||
|
||||
/**
|
||||
* @brief Get wifi band.
|
||||
* @brief Get WiFi current band.
|
||||
*
|
||||
* @param[in] band store band of wifi
|
||||
* @param[in] band store current band of WiFi
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
@ -1626,7 +1646,39 @@ esp_err_t esp_wifi_set_band(wifi_band_t band);
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_get_band(wifi_band_t* band);
|
||||
#endif /* SOC_WIFI_HE_SUPPORT_5G */
|
||||
|
||||
/**
|
||||
* @brief Set WiFi band mode.
|
||||
*
|
||||
* @attention 1. When the WiFi band mode is set to 2.4G only, it operates exclusively on the 2.4GHz channels.
|
||||
* @attention 2. When the WiFi band mode is set to 5G only, it operates exclusively on the 5GHz channels.
|
||||
* @attention 3. When the WiFi band mode is set to 2.4G + 5G (WIFI_BAND_MODE_AUTO), it can operate on both the 2.4GHz and 5GHz channels.
|
||||
* @attention 4. WiFi band mode can be set to 5G only or 2.4G + 5G (WIFI_BAND_MODE_AUTO) if CONFIG_SOC_WIFI_HE_SUPPORT_5G is supported.
|
||||
* @attention 5. If CONFIG_SOC_WIFI_HE_SUPPORT_5G is not supported, the API will return ESP_ERR_INVALID_ARG when the band mode is set to either 5G only or 2.4G + 5G (WIFI_BAND_MODE_AUTO).
|
||||
* @attention 6. When a WiFi band mode change triggers a band change, if no channel is set for the current band, a default channel will be assigned: channel 1 for 2.4G band and channel 36 for 5G band.
|
||||
*
|
||||
* @param[in] band_mode store the band mode of WiFi
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*
|
||||
*/
|
||||
esp_err_t esp_wifi_set_band_mode(wifi_band_mode_t band_mode);
|
||||
|
||||
/**
|
||||
* @brief get WiFi band mode.
|
||||
*
|
||||
* @param[in] band_mode store the band mode of WiFi
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
|
||||
esp_err_t esp_wifi_get_band_mode(wifi_band_mode_t* band_mode);
|
||||
|
||||
#if CONFIG_ESP_COEX_POWER_MANAGEMENT
|
||||
/**
|
||||
@ -1643,6 +1695,81 @@ esp_err_t esp_wifi_get_band(wifi_band_t* band);
|
||||
esp_err_t esp_wifi_coex_pwr_configure(bool enabled);
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Set the supported WiFi protocols for the specified interface.
|
||||
*
|
||||
* @attention 1. When the WiFi band mode is set to 2.4G only, it will not set 5G protocol
|
||||
* @attention 2. When the WiFi band mode is set to 5G only, it will not set 2.4G protocol
|
||||
* @attention 3. This API supports setting the maximum protocol. For example, if the 2.4G protocol is set to 802.11n, it will automatically configure to 802.11b/g/n.
|
||||
*
|
||||
* @param ifx interface
|
||||
* @param protocols WiFi protocols include 2.4G protocol and 5G protocol
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_set_protocols(wifi_interface_t ifx, wifi_protocols_t *protocols);
|
||||
|
||||
/**
|
||||
* @brief Get the current protocol of the specified interface and specified band
|
||||
*
|
||||
* @attention 1. The 5G protocol can only be read when CONFIG_SOC_WIFI_HE_SUPPORT_5G is enabled.
|
||||
* @attention 2. When the WiFi band mode is set to 2.4G only, it will not get 5G protocol
|
||||
* @attention 3. When the WiFi band mode is set to 5G only, it will not get 2.4G protocol
|
||||
*
|
||||
* @param ifx interface
|
||||
* @param[out] protocols store current WiFi protocols of interface ifx
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_get_protocols(wifi_interface_t ifx, wifi_protocols_t *protocols);
|
||||
|
||||
/**
|
||||
* @brief Set the bandwidth of specified interface and specified band
|
||||
*
|
||||
* @attention 1. WIFI_BW_HT40 is supported only when the interface support 11N
|
||||
* @attention 2. When the interface supports 11AX/11AC, it only supports setting WIFI_BW_HT20.
|
||||
* @attention 3. When the WiFi band mode is set to 2.4G only, it will not set 5G bandwidth
|
||||
* @attention 4. When the WiFi band mode is set to 5G only, it will not set 2.4G bandwidth
|
||||
*
|
||||
* @param ifx interface to be configured
|
||||
* @param bw WiFi bandwidths include 2.4G bandwidth and 5G bandwidth
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
* - others: refer to error codes in esp_err.h
|
||||
*/
|
||||
esp_err_t esp_wifi_set_bandwidths(wifi_interface_t ifx, wifi_bandwidths_t* bw);
|
||||
|
||||
/**
|
||||
* @brief Get the bandwidth of specified interface and specified band
|
||||
*
|
||||
* @attention 1. The 5G bandwidth can only be read when CONFIG_SOC_WIFI_HE_SUPPORT_5G is enabled.
|
||||
* @attention 2. When the WiFi band mode is set to 2.4G only, it will not get 5G bandwidth
|
||||
* @attention 3. When the WiFi band mode is set to 5G only, it will not get 2.4G bandwidth
|
||||
*
|
||||
* @param ifx interface to be configured
|
||||
* @param[out] bw store bandwidths of interface ifx
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_IF: invalid interface
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_get_bandwidths(wifi_interface_t ifx, wifi_bandwidths_t *bw);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
@ -35,7 +35,7 @@ extern "C" {
|
||||
* - ESP_ERR_WIFI_TWT_FULL: no available flow id
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_itwt_setup(wifi_twt_setup_config_t *setup_config);
|
||||
esp_err_t esp_wifi_sta_itwt_setup(wifi_itwt_setup_config_t *setup_config);
|
||||
|
||||
/**
|
||||
* @brief Tear down individual TWT agreements
|
||||
@ -142,6 +142,80 @@ esp_err_t esp_wifi_enable_rx_statistics(bool rx_stats, bool rx_mu_stats);
|
||||
*/
|
||||
esp_err_t esp_wifi_enable_tx_statistics(esp_wifi_aci_t aci, bool tx_stats);
|
||||
|
||||
/**
|
||||
* @brief Set up an broadcast TWT agreement (NegotiationType=3) or change TWT parameters of the existing TWT agreement
|
||||
* - TWT Wake Interval = TWT Wake Interval Mantissa * (2 ^ TWT Wake Interval Exponent), unit: us
|
||||
* - e.g. TWT Wake Interval Mantissa = 512, TWT Wake Interval Exponent = 12, then TWT Wake Interval is 2097.152 ms
|
||||
* Nominal Minimum Wake Duration = 255, then TWT Wake Duration is 65.28 ms
|
||||
*
|
||||
* @attention Support at most 32 TWT agreements, otherwise ESP_ERR_WIFI_TWT_FULL will be returned.
|
||||
* Support sleep time up to (1 << 35) us.
|
||||
*
|
||||
* @param[in,out] config pointer to btwt setup config structure.
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
|
||||
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
|
||||
* - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status
|
||||
* - ESP_ERR_WIFI_TWT_FULL: no available flow id
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_btwt_setup(wifi_btwt_setup_config_t *config);
|
||||
|
||||
/**
|
||||
* @brief Tear down broadcast TWT agreements
|
||||
*
|
||||
* @param[in] btwt_id The value range is [0, 31].
|
||||
* BTWT_ID_ALL indicates tear down all broadcast TWT agreements.
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
|
||||
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
|
||||
* - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_btwt_teardown(uint8_t btwt_id);
|
||||
|
||||
/**
|
||||
* @brief Get number of broadcast TWTs supported by the connected AP
|
||||
*
|
||||
* @param[out] btwt_number store number of btwts supported by the connected AP
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
|
||||
* - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start
|
||||
* - ESP_ERR_INVALID_ARG: invalid argument
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_get_btwt_num(uint8_t *btwt_number);
|
||||
|
||||
/**
|
||||
* @brief Get broadcast TWT information
|
||||
*
|
||||
* @param[in] btwt_number As input param, it stores max btwt number AP supported.
|
||||
* @param[in] btwt_info array to hold the btwt information supported by AP, and the array size must be at least as large as the BTWT number.
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
* - ESP_FAIL: fail
|
||||
* - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_btwt_get_info(uint8_t btwt_number, esp_wifi_btwt_info_t *btwt_info);
|
||||
|
||||
/**
|
||||
* @brief Set WiFi TWT config
|
||||
*
|
||||
* @param[in] config pointer to the WiFi TWT configure structure.
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK: succeed
|
||||
*/
|
||||
esp_err_t esp_wifi_sta_twt_config(wifi_twt_config_t *config);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -15,6 +15,7 @@ extern "C" {
|
||||
#endif
|
||||
|
||||
#define FLOW_ID_ALL (8)
|
||||
#define BTWT_ID_ALL (32)
|
||||
#define BSS_MAX_COLOR (63)
|
||||
|
||||
/**
|
||||
@ -112,24 +113,37 @@ typedef enum {
|
||||
} wifi_twt_setup_cmds_t;
|
||||
|
||||
/**
|
||||
* @brief TWT setup config
|
||||
* @brief broadcast TWT setup config
|
||||
*/
|
||||
typedef struct {
|
||||
wifi_twt_setup_cmds_t setup_cmd; /**< Indicates the type of TWT command*/
|
||||
uint16_t trigger : 1; /**< 1: a trigger-enabled TWT, 0: a non-trigger-enabled TWT */
|
||||
uint16_t flow_type : 1; /**< 0: an announced TWT, 1: an unannounced TWT */
|
||||
uint8_t btwt_id; /**< When set up an broadcast TWT agreement, the broadcast twt id will be assigned by AP after a successful agreement setup.
|
||||
broadcast twt id could be specified to a value in the range of [1, 31], but it might be change by AP in the response.
|
||||
When change TWT parameters of the existing TWT agreement, broadcast twt id should be an existing one. The value range is [1, 31].*/
|
||||
uint16_t timeout_time_ms; /**< Timeout times of receiving setup action frame response, default 5s*/
|
||||
} wifi_btwt_setup_config_t;
|
||||
|
||||
/**
|
||||
* @brief Individual TWT setup config
|
||||
*/
|
||||
typedef struct {
|
||||
wifi_twt_setup_cmds_t setup_cmd; /**< Indicates the type of TWT command */
|
||||
uint16_t trigger : 1; /**< 1: a trigger-enabled individual TWT, 0: a non-trigger-enabled individual TWT */
|
||||
uint16_t flow_type : 1; /**< 0: an announced individual TWT, 1: an unannounced individual TWT */
|
||||
uint16_t flow_id : 3; /**< When set up an individual TWT agreement, the flow id will be assigned by AP after a successful agreement setup.
|
||||
flow_id could be specified to a value in the range of [0, 7], but it might be changed by AP in the response.
|
||||
When change TWT parameters of the existing TWT agreement, flow_id should be an existing one. The value range is [0, 7]. */
|
||||
uint16_t wake_invl_expn : 5; /**< TWT Wake Interval Exponent. The value range is [0, 31]. */
|
||||
uint16_t wake_duration_unit : 1; /**< TWT Wake duration unit, 0: 256us 1: TU (TU = 1024us)*/
|
||||
uint16_t wake_invl_expn : 5; /**< Individual TWT Wake Interval Exponent. The value range is [0, 31]. */
|
||||
uint16_t wake_duration_unit : 1; /**< Individual TWT Wake duration unit, 0: 256us 1: TU (TU = 1024us)*/
|
||||
uint16_t reserved : 5; /**< bit: 11.15 reserved */
|
||||
uint8_t min_wake_dura; /**< Nominal Minimum Wake Duration, indicates the minimum amount of time, in unit of 256 us, that the TWT requesting STA expects that it needs to be awake. The value range is [1, 255]. */
|
||||
uint16_t wake_invl_mant; /**< TWT Wake Interval Mantissa. The value range is [1, 65535]. */
|
||||
uint16_t twt_id; /**< TWT connection id, the value range is [0, 32767]. */
|
||||
uint8_t min_wake_dura; /**< Nominal Minimum Wake Duration, indicates the minimum amount of time, in unit of 256 us, that the individual TWT requesting STA expects that it needs to be awake. The value range is [1, 255]. */
|
||||
uint16_t wake_invl_mant; /**< Individual TWT Wake Interval Mantissa. The value range is [1, 65535]. */
|
||||
uint16_t twt_id; /**< Individual TWT connection id, the value range is [0, 32767]. */
|
||||
uint16_t timeout_time_ms; /**< Timeout times of receiving setup action frame response, default 5s*/
|
||||
} wifi_twt_setup_config_t;
|
||||
|
||||
typedef wifi_twt_setup_config_t wifi_itwt_setup_config_t;
|
||||
|
||||
/**
|
||||
* @brief HE SU GI and LTF types
|
||||
*/
|
||||
@ -294,9 +308,21 @@ typedef struct {
|
||||
} __attribute__((packed)) esp_wifi_rxctrl_t;
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief bTWT setup status
|
||||
*/
|
||||
typedef enum {
|
||||
BTWT_SETUP_TXFAIL, /**< station sends btwt setup request frame fail */
|
||||
BTWT_SETUP_SUCCESS, /**< station receives btwt setup response frame and setup btwt sucessfully */
|
||||
BTWT_SETUP_TIMEOUT, /**< timeout of receiving btwt setup response frame */
|
||||
BTWT_SETUP_FULL, /**< indicate there is no available btwt id */
|
||||
BTWT_SETUP_INVALID_ARG, /**< indicate invalid argument to setup btwt */
|
||||
BTWT_SETUP_INTERNAL_ERR, /**< indicate internal error to setup btwt */
|
||||
} wifi_btwt_setup_status_t;
|
||||
|
||||
/** Argument structure for WIFI_EVENT_TWT_SET_UP event */
|
||||
typedef struct {
|
||||
wifi_twt_setup_config_t config; /**< itwt setup config, this value is determined by the AP */
|
||||
wifi_itwt_setup_config_t config; /**< itwt setup config, this value is determined by the AP */
|
||||
esp_err_t status; /**< itwt setup status, 1: indicate setup success, others : indicate setup fail */
|
||||
uint8_t reason; /**< itwt setup frame tx fail reason */
|
||||
uint64_t target_wake_time; /**< TWT SP start time */
|
||||
@ -316,6 +342,34 @@ typedef struct {
|
||||
wifi_itwt_teardown_status_t status; /**< itwt teardown status */
|
||||
} wifi_event_sta_itwt_teardown_t;
|
||||
|
||||
/** Argument structure for WIFI_EVENT_BTWT_SET_UP event */
|
||||
typedef struct {
|
||||
wifi_btwt_setup_status_t status; /**< indicate btwt setup status */
|
||||
wifi_twt_setup_cmds_t setup_cmd; /**< indicate the type of TWT command */
|
||||
uint8_t btwt_id; /**< indicate btwt id */
|
||||
uint8_t min_wake_dura; /**< Nominal Minimum Wake Duration, indicates the minimum amount of time, in unit of 256 us, that the TWT requesting STA expects that it needs to be awake. The value range is [1, 255]. */
|
||||
uint8_t wake_invl_expn; /**< TWT Wake Interval Exponent. The value range is [0, 31]. */
|
||||
uint16_t wake_invl_mant; /**< TWT Wake Interval Mantissa. The value range is [1, 65535]. */
|
||||
bool trigger; /**< 1: a trigger-enabled TWT, 0: a non-trigger-enabled TWT */
|
||||
uint8_t flow_type; /**< 0: an announced TWT, 1: an unannounced TWT */
|
||||
uint8_t reason; /**< btwt setup frame tx fail reason */
|
||||
uint64_t target_wake_time; /**< TWT SP start time */
|
||||
} wifi_event_sta_btwt_setup_t;
|
||||
|
||||
/**
|
||||
* @brief BTWT teardown status
|
||||
*/
|
||||
typedef enum {
|
||||
BTWT_TEARDOWN_FAIL, /**< station sends teardown frame fail */
|
||||
BTWT_TEARDOWN_SUCCESS, /**< 1) station successfully sends teardown frame to AP; 2) station receives teardown frame from AP */
|
||||
} wifi_btwt_teardown_status_t;
|
||||
|
||||
/** Argument structure for WIFI_EVENT_TWT_TEARDOWN event */
|
||||
typedef struct {
|
||||
uint8_t btwt_id; /**< btwt id */
|
||||
wifi_btwt_teardown_status_t status; /**< btwt teardown status */
|
||||
} wifi_event_sta_btwt_teardown_t;
|
||||
|
||||
/**
|
||||
* @brief iTWT probe status
|
||||
*/
|
||||
@ -360,6 +414,21 @@ typedef struct {
|
||||
uint8_t flow_id; /**< flow id */
|
||||
} wifi_event_sta_twt_wakeup_t;
|
||||
|
||||
/** Argument structure for twt information */
|
||||
typedef struct {
|
||||
bool btwt_id_in_use; /**< indicate whether the btwt id is in use or not */
|
||||
uint16_t btwt_trigger : 1; /**< 1: a trigger-enabled TWT, 0: a non-trigger-enabled TWT */
|
||||
uint16_t btwt_flow_type : 1; /**< 0: an announced TWT, 1: an unannounced TWT */
|
||||
uint16_t btwt_recommendation : 3; /**< indicate recommendations on the types of frames. 0: no constraints, [1, 3], [4, 7] reserved */
|
||||
uint16_t btwt_wake_interval_exponent : 5; /**< TWT Wake Interval Exponent. The value range is [0, 31]. */
|
||||
uint16_t btwt_rsvd : 6; /**< reserved */
|
||||
uint8_t btwt_wake_duration; /**< TWT Wake duration unit, 0: 256us 1: TU (TU = 1024us) */
|
||||
uint16_t btwt_wake_interval_mantissa; /**< TWT Wake Interval Mantissa. The value range is [1, 65535]. */
|
||||
uint16_t btwt_info_id : 5; /**< btwt id */
|
||||
uint16_t btwt_info_persistence : 8; /**< indicate the number of TBTTs during which the Broadcast TWT SPs corresponding to this broadcast TWT parameters set are present */
|
||||
uint16_t btwt_info_rsvd : 3; /**< reserved */
|
||||
} esp_wifi_btwt_info_t;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -291,6 +291,19 @@ typedef enum {
|
||||
WIFI_PS_MAX_MODEM, /**< Maximum modem power saving. In this mode, interval to receive beacons is determined by the listen_interval parameter in wifi_sta_config_t */
|
||||
} wifi_ps_type_t;
|
||||
|
||||
/** Argument structure for WiFi band */
|
||||
typedef enum {
|
||||
WIFI_BAND_2G = 1, /* Band is 2.4G */
|
||||
WIFI_BAND_5G = 2, /* Band is 5G */
|
||||
} wifi_band_t;
|
||||
|
||||
/** Argument structure for WiFi band mode */
|
||||
typedef enum {
|
||||
WIFI_BAND_MODE_2G_ONLY = 1, /* WiFi band mode is 2.4G only */
|
||||
WIFI_BAND_MODE_5G_ONLY = 2, /* WiFi band mode is 5G only */
|
||||
WIFI_BAND_MODE_AUTO = 3, /* WiFi band mode is 2.4G + 5G */
|
||||
} wifi_band_mode_t;
|
||||
|
||||
#define WIFI_PROTOCOL_11B 0x1
|
||||
#define WIFI_PROTOCOL_11G 0x2
|
||||
#define WIFI_PROTOCOL_11N 0x4
|
||||
@ -299,6 +312,12 @@ typedef enum {
|
||||
#define WIFI_PROTOCOL_11AC 0x20
|
||||
#define WIFI_PROTOCOL_11AX 0x40
|
||||
|
||||
/** @brief Description of a WiFi protocols */
|
||||
typedef struct {
|
||||
uint16_t ghz_2g; /**< Represents 2.4 GHz protocol, support 802.11b or 802.11g or 802.11n or 802.11ax or LR mode */
|
||||
uint16_t ghz_5g; /**< Represents 5 GHz protocol, support 802.11a or 802.11n or 802.11ac or 802.11ax */
|
||||
} wifi_protocols_t;
|
||||
|
||||
typedef enum {
|
||||
WIFI_BW_HT20 = 1, /* Bandwidth is HT20 */
|
||||
WIFI_BW20 = WIFI_BW_HT20, /* Bandwidth is 20 MHz */
|
||||
@ -309,6 +328,12 @@ typedef enum {
|
||||
WIFI_BW80_BW80 = 5, /* Bandwidth is 80+80 MHz */
|
||||
} wifi_bandwidth_t;
|
||||
|
||||
/** @brief Description of a WiFi band bandwidths */
|
||||
typedef struct {
|
||||
wifi_bandwidth_t ghz_2g; /* Represents 2.4 GHz bandwidth */
|
||||
wifi_bandwidth_t ghz_5g; /* Represents 5 GHz bandwidth */
|
||||
} wifi_bandwidths_t;
|
||||
|
||||
/** Configuration structure for Protected Management Frame */
|
||||
typedef struct {
|
||||
bool capable; /**< Deprecated variable. Device will always connect in PMF mode if other device also advertises PMF capability. */
|
||||
@ -356,7 +381,7 @@ typedef struct {
|
||||
wifi_scan_method_t scan_method; /**< do all channel scan or fast scan */
|
||||
bool bssid_set; /**< whether set MAC address of target AP or not. Generally, station_config.bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.*/
|
||||
uint8_t bssid[6]; /**< MAC address of target AP*/
|
||||
uint8_t channel; /**< channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/
|
||||
uint8_t channel; /**< channel of target AP. For 2.4G AP, set to 1~13 to scan starting from the specified channel before connecting to AP. For 5G AP, set to 36~177 (36, 40, 44 ... 177) to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/
|
||||
uint16_t listen_interval; /**< Listen interval for ESP32 station to receive beacon when WIFI_PS_MAX_MODEM is set. Units: AP beacon intervals. Defaults to 3 if set to 0. */
|
||||
wifi_sort_method_t sort_method; /**< sort the connect AP in the list by rssi or security mode */
|
||||
wifi_scan_threshold_t threshold; /**< When scan_threshold is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used. */
|
||||
@ -715,19 +740,19 @@ typedef enum {
|
||||
WIFI_PHY_RATE_9M = 0x0F, /**< 9 Mbps */
|
||||
/**< rate table and guard interval information for each MCS rate*/
|
||||
/*
|
||||
-----------------------------------------------------------------------------------------------------------
|
||||
MCS RATE | HT20 | HT40 | HE20 |
|
||||
WIFI_PHY_RATE_MCS0_LGI | 6.5 Mbps (800ns) | 13.5 Mbps (800ns) | 8.1 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS1_LGI | 13 Mbps (800ns) | 27 Mbps (800ns) | 16.3 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS2_LGI | 19.5 Mbps (800ns) | 40.5 Mbps (800ns) | 24.4 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS3_LGI | 26 Mbps (800ns) | 54 Mbps (800ns) | 32.5 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS4_LGI | 39 Mbps (800ns) | 81 Mbps (800ns) | 48.8 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS5_LGI | 52 Mbps (800ns) | 108 Mbps (800ns) | 65 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS6_LGI | 58.5 Mbps (800ns) | 121.5 Mbps (800ns) | 73.1 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS7_LGI | 65 Mbps (800ns) | 135 Mbps (800ns) | 81.3 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS8_LGI | ----- | ----- | 97.5 Mbps (1600ns) |
|
||||
WIFI_PHY_RATE_MCS9_LGI | ----- | ----- | 108.3 Mbps (1600ns) |
|
||||
-----------------------------------------------------------------------------------------------------------
|
||||
-------------------------------------------------------------------------------------------------------------------------------------
|
||||
MCS RATE | HT20 | HT40 | HE20 | VHT20 |
|
||||
WIFI_PHY_RATE_MCS0_LGI | 6.5 Mbps (800ns) | 13.5 Mbps (800ns) | 8.1 Mbps (1600ns) | 6.5 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS1_LGI | 13 Mbps (800ns) | 27 Mbps (800ns) | 16.3 Mbps (1600ns) | 13 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS2_LGI | 19.5 Mbps (800ns) | 40.5 Mbps (800ns) | 24.4 Mbps (1600ns) | 19.5 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS3_LGI | 26 Mbps (800ns) | 54 Mbps (800ns) | 32.5 Mbps (1600ns) | 26 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS4_LGI | 39 Mbps (800ns) | 81 Mbps (800ns) | 48.8 Mbps (1600ns) | 39 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS5_LGI | 52 Mbps (800ns) | 108 Mbps (800ns) | 65 Mbps (1600ns) | 52 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS6_LGI | 58.5 Mbps (800ns) | 121.5 Mbps (800ns) | 73.1 Mbps (1600ns) | 58.5 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS7_LGI | 65 Mbps (800ns) | 135 Mbps (800ns) | 81.3 Mbps (1600ns) | 65 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS8_LGI | ----- | ----- | 97.5 Mbps (1600ns) | ----- |
|
||||
WIFI_PHY_RATE_MCS9_LGI | ----- | ----- | 108.3 Mbps (1600ns) | ----- |
|
||||
-------------------------------------------------------------------------------------------------------------------------------------
|
||||
*/
|
||||
WIFI_PHY_RATE_MCS0_LGI = 0x10, /**< MCS0 with long GI */
|
||||
WIFI_PHY_RATE_MCS1_LGI = 0x11, /**< MCS1 with long GI */
|
||||
@ -742,19 +767,19 @@ typedef enum {
|
||||
WIFI_PHY_RATE_MCS9_LGI, /**< MCS9 with long GI */
|
||||
#endif
|
||||
/*
|
||||
-----------------------------------------------------------------------------------------------------------
|
||||
MCS RATE | HT20 | HT40 | HE20 |
|
||||
WIFI_PHY_RATE_MCS0_SGI | 7.2 Mbps (400ns) | 15 Mbps (400ns) | 8.6 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS1_SGI | 14.4 Mbps (400ns) | 30 Mbps (400ns) | 17.2 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS2_SGI | 21.7 Mbps (400ns) | 45 Mbps (400ns) | 25.8 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS3_SGI | 28.9 Mbps (400ns) | 60 Mbps (400ns) | 34.4 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS4_SGI | 43.3 Mbps (400ns) | 90 Mbps (400ns) | 51.6 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS5_SGI | 57.8 Mbps (400ns) | 120 Mbps (400ns) | 68.8 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS6_SGI | 65 Mbps (400ns) | 135 Mbps (400ns) | 77.4 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS7_SGI | 72.2 Mbps (400ns) | 150 Mbps (400ns) | 86 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS8_SGI | ----- | ----- | 103.2 Mbps (800ns) |
|
||||
WIFI_PHY_RATE_MCS9_SGI | ----- | ----- | 114.7 Mbps (800ns) |
|
||||
-----------------------------------------------------------------------------------------------------------
|
||||
-------------------------------------------------------------------------------------------------------------------------------------
|
||||
MCS RATE | HT20 | HT40 | HE20 | VHT20 |
|
||||
WIFI_PHY_RATE_MCS0_SGI | 7.2 Mbps (400ns) | 15 Mbps (400ns) | 8.6 Mbps (800ns) | 7.2 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS1_SGI | 14.4 Mbps (400ns) | 30 Mbps (400ns) | 17.2 Mbps (800ns) | 14.4 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS2_SGI | 21.7 Mbps (400ns) | 45 Mbps (400ns) | 25.8 Mbps (800ns) | 21.7 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS3_SGI | 28.9 Mbps (400ns) | 60 Mbps (400ns) | 34.4 Mbps (800ns) | 28.9 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS4_SGI | 43.3 Mbps (400ns) | 90 Mbps (400ns) | 51.6 Mbps (800ns) | 43.3 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS5_SGI | 57.8 Mbps (400ns) | 120 Mbps (400ns) | 68.8 Mbps (800ns) | 57.8 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS6_SGI | 65 Mbps (400ns) | 135 Mbps (400ns) | 77.4 Mbps (800ns) | 65 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS7_SGI | 72.2 Mbps (400ns) | 150 Mbps (400ns) | 86 Mbps (800ns) | 72.2 Mbps (400ns) |
|
||||
WIFI_PHY_RATE_MCS8_SGI | ----- | ----- | 103.2 Mbps (800ns) | ----- |
|
||||
WIFI_PHY_RATE_MCS9_SGI | ----- | ----- | 114.7 Mbps (800ns) | ----- |
|
||||
-------------------------------------------------------------------------------------------------------------------------------------
|
||||
*/
|
||||
WIFI_PHY_RATE_MCS0_SGI, /**< MCS0 with short GI */
|
||||
WIFI_PHY_RATE_MCS1_SGI, /**< MCS1 with short GI */
|
||||
@ -817,6 +842,8 @@ typedef enum {
|
||||
WIFI_EVENT_ITWT_PROBE, /**< iTWT probe */
|
||||
WIFI_EVENT_ITWT_SUSPEND, /**< iTWT suspend */
|
||||
WIFI_EVENT_TWT_WAKEUP, /**< TWT wakeup */
|
||||
WIFI_EVENT_BTWT_SETUP, /**< bTWT setup */
|
||||
WIFI_EVENT_BTWT_TEARDOWN, /**< bTWT teardown*/
|
||||
|
||||
WIFI_EVENT_NAN_STARTED, /**< NAN Discovery has started */
|
||||
WIFI_EVENT_NAN_STOPPED, /**< NAN Discovery has stopped */
|
||||
@ -1065,13 +1092,6 @@ typedef struct {
|
||||
uint16_t report_len; /**< Length of the report*/
|
||||
} wifi_event_neighbor_report_t;
|
||||
|
||||
/** Argument structure for wifi band */
|
||||
typedef enum {
|
||||
WIFI_BAND_2G = 1, /* Band is 2.4G */
|
||||
WIFI_BAND_5G = 2, /* Band is 5G */
|
||||
WIFI_BAND_2G_5G = 3, /* Band is 2,4G + 5G */
|
||||
} wifi_band_t;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -1 +1 @@
|
||||
Subproject commit ce181b3e947d3d8495c17b9881930816bb94ed58
|
||||
Subproject commit 600bbfac047047bb975a9bf8a8e1c78dfc3a72af
|
||||
@ -196,7 +196,7 @@ static esp_err_t wifi_deinit_internal(void)
|
||||
esp_wifi_beacon_monitor_configure(&monitor_config);
|
||||
#endif
|
||||
|
||||
#if CONFIG_ESP_WIFI_SLP_IRAM_OPT
|
||||
#if CONFIG_PM_ENABLE && CONFIG_ESP_WIFI_SLP_IRAM_OPT
|
||||
esp_pm_unregister_light_sleep_default_params_config_callback();
|
||||
#endif
|
||||
#if CONFIG_FREERTOS_USE_TICKLESS_IDLE
|
||||
@ -321,7 +321,7 @@ esp_err_t esp_wifi_init(const wifi_init_config_t *config)
|
||||
}
|
||||
#endif
|
||||
|
||||
#if CONFIG_ESP_WIFI_SLP_IRAM_OPT
|
||||
#if CONFIG_PM_ENABLE && CONFIG_ESP_WIFI_SLP_IRAM_OPT
|
||||
int min_freq_mhz = esp_pm_impl_get_cpu_freq(PM_MODE_LIGHT_SLEEP);
|
||||
int max_freq_mhz = esp_pm_impl_get_cpu_freq(PM_MODE_CPU_MAX);
|
||||
esp_wifi_internal_update_light_sleep_default_params(min_freq_mhz, max_freq_mhz);
|
||||
|
||||
@ -5,7 +5,7 @@ components/esp_wifi/test_apps/wifi_connect:
|
||||
- if: SOC_WIFI_SUPPORTED != 1
|
||||
disable_test:
|
||||
- if: IDF_TARGET not in ["esp32", "esp32c3", "esp32s3", "esp32c2"]
|
||||
reason: leak of runner
|
||||
reason: lack of runner
|
||||
|
||||
components/esp_wifi/test_apps/wifi_function:
|
||||
disable:
|
||||
|
||||
@ -1,2 +1,2 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-License-Identifier: Unlicense OR CC0-1.0
|
||||
|
||||
import pytest
|
||||
from pytest_embedded_idf.unity_tester import CaseTester
|
||||
|
||||
|
||||
@ -1,3 +1,3 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
|
||||
@ -9,6 +9,7 @@ from pytest_embedded import Dut
|
||||
@pytest.mark.esp32s2
|
||||
@pytest.mark.esp32s3
|
||||
@pytest.mark.esp32c6
|
||||
@pytest.mark.esp32c5
|
||||
# @pytest.mark.esp32c2 # esp32c2 are using xtal_26mhz
|
||||
@pytest.mark.generic
|
||||
def test_wifi_unit_test(dut: Dut) -> None:
|
||||
|
||||
@ -51,6 +51,10 @@ config SOC_USB_SERIAL_JTAG_SUPPORTED
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_SUPPORTED
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_SUPPORTS_SECURE_DL_MODE
|
||||
bool
|
||||
default y
|
||||
@ -1103,6 +1107,14 @@ config SOC_UART_SUPPORT_FSM_TX_WAIT_SEND
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_COEX_HW_PTI
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH
|
||||
int
|
||||
default 12
|
||||
|
||||
config SOC_PM_SUPPORT_MODEM_PD
|
||||
bool
|
||||
default y
|
||||
@ -1163,6 +1175,38 @@ config SOC_RCC_IS_INDEPENDENT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_HW_TSF
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_FTM_SUPPORT
|
||||
bool
|
||||
default n
|
||||
|
||||
config SOC_WIFI_GCMP_SUPPORT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_WAPI_SUPPORT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_CSI_SUPPORT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_MESH_SUPPORT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_HE_SUPPORT
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_WIFI_HE_SUPPORT_5G
|
||||
bool
|
||||
default y
|
||||
|
||||
config SOC_BLE_SUPPORTED
|
||||
bool
|
||||
default y
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
#define SOC_ASYNC_MEMCPY_SUPPORTED 1
|
||||
#define SOC_USB_SERIAL_JTAG_SUPPORTED 1
|
||||
// #define SOC_TEMP_SENSOR_SUPPORTED 1 // TODO: [ESP32C5] IDF-8727
|
||||
// #define SOC_WIFI_SUPPORTED 1 // TODO: [ESP32C5] IDF-8851
|
||||
#define SOC_WIFI_SUPPORTED 1
|
||||
#define SOC_SUPPORTS_SECURE_DL_MODE 1
|
||||
#define SOC_LP_CORE_SUPPORTED 1
|
||||
#define SOC_ULP_SUPPORTED 1
|
||||
@ -513,7 +513,7 @@
|
||||
#define SOC_UART_SUPPORT_FSM_TX_WAIT_SEND (1)
|
||||
|
||||
/*-------------------------- COEXISTENCE HARDWARE PTI CAPS -------------------------------*/
|
||||
// #define SOC_COEX_HW_PTI (1)
|
||||
#define SOC_COEX_HW_PTI (1)
|
||||
|
||||
/*-------------------------- EXTERNAL COEXISTENCE CAPS -------------------------------------*/
|
||||
// #define SOC_EXTERNAL_COEX_ADVANCE (1) /*!< HARDWARE ADVANCED EXTERNAL COEXISTENCE CAPS */
|
||||
@ -523,7 +523,7 @@
|
||||
// #define SOC_PHY_DIG_REGS_MEM_SIZE (21*4)
|
||||
|
||||
/*--------------- WIFI LIGHT SLEEP CLOCK WIDTH CAPS --------------------------*/
|
||||
// #define SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH (12)
|
||||
#define SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH (12)
|
||||
|
||||
/*-------------------------- Power Management CAPS ----------------------------*/
|
||||
// #define SOC_PM_SUPPORT_WIFI_WAKEUP (1)
|
||||
@ -571,13 +571,14 @@
|
||||
// #define SOC_TEMPERATURE_SENSOR_INTR_SUPPORT (1)
|
||||
|
||||
/*------------------------------------ WI-FI CAPS ------------------------------------*/
|
||||
// #define SOC_WIFI_HW_TSF (1) /*!< Support hardware TSF */
|
||||
// #define SOC_WIFI_FTM_SUPPORT (0) /*!< Support FTM */
|
||||
// #define SOC_WIFI_GCMP_SUPPORT (1) /*!< Support GCMP(GCMP128 and GCMP256) */
|
||||
// #define SOC_WIFI_WAPI_SUPPORT (1) /*!< Support WAPI */
|
||||
// #define SOC_WIFI_CSI_SUPPORT (1) /*!< Support CSI */
|
||||
// #define SOC_WIFI_MESH_SUPPORT (1) /*!< Support WIFI MESH */
|
||||
// #define SOC_WIFI_HE_SUPPORT (1) /*!< Support Wi-Fi 6 */
|
||||
#define SOC_WIFI_HW_TSF (1) /*!< Support hardware TSF */
|
||||
#define SOC_WIFI_FTM_SUPPORT (0) /*!< Support FTM */ // TODO: [ESP32C5] WIFI-6426
|
||||
#define SOC_WIFI_GCMP_SUPPORT (1) /*!< Support GCMP(GCMP128 and GCMP256) */
|
||||
#define SOC_WIFI_WAPI_SUPPORT (1) /*!< Support WAPI */
|
||||
#define SOC_WIFI_CSI_SUPPORT (1) /*!< Support CSI */
|
||||
#define SOC_WIFI_MESH_SUPPORT (1) /*!< Support WIFI MESH */
|
||||
#define SOC_WIFI_HE_SUPPORT (1) /*!< Support Wi-Fi 6 */
|
||||
#define SOC_WIFI_HE_SUPPORT_5G (1) /*!< Support Wi-Fi 6 in 5G */
|
||||
|
||||
/*---------------------------------- Bluetooth CAPS ----------------------------------*/
|
||||
#define SOC_BLE_SUPPORTED (1) /*!< Support Bluetooth Low Energy hardware */
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# wpa_supplicant unit test
|
||||
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
# SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-License-Identifier: CC0-1.0
|
||||
|
||||
import pytest
|
||||
from pytest_embedded import Dut
|
||||
from pytest_embedded_idf.unity_tester import CaseTester
|
||||
@ -13,6 +12,7 @@ from pytest_embedded_idf.unity_tester import CaseTester
|
||||
@pytest.mark.esp32c3
|
||||
@pytest.mark.esp32c2
|
||||
@pytest.mark.esp32c6
|
||||
@pytest.mark.esp32c5
|
||||
def test_wpa_supplicant_ut(dut: Dut) -> None:
|
||||
dut.run_all_single_board_cases()
|
||||
|
||||
|
||||
@ -1,9 +1,9 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# ESP-IDF Blufi Example
|
||||
|
||||
This demo shows how to use the *Blufi* to configurate the Wi-Fi connection to AP.
|
||||
This demo shows how to use the *Blufi* to configure the Wi-Fi connection to AP.
|
||||
|
||||
The BluFi for ESP32 is a Wi-Fi network configuration function via Bluetooth channel. It provides a secure protocol to pass Wi-Fi configuration and credentials to the ESP32.
|
||||
|
||||
@ -50,7 +50,7 @@ I (708) system_api: read default base MAC address from EFUSE
|
||||
I (718) wifi:wifi firmware version: 44799ff
|
||||
I (718) wifi:wifi certification version: v7.0
|
||||
I (718) wifi:config NVS flash: enabled
|
||||
I (718) wifi:config nano formating: disabled
|
||||
I (718) wifi:config nano formatting: disabled
|
||||
I (728) wifi:Init data frame dynamic rx buffer num: 32
|
||||
I (728) wifi:Init management frame dynamic rx buffer num: 32
|
||||
I (738) wifi:Init management short buffer num: 32
|
||||
|
||||
18
examples/bluetooth/blufi/sdkconfig.defaults.esp32c5
Normal file
18
examples/bluetooth/blufi/sdkconfig.defaults.esp32c5
Normal file
@ -0,0 +1,18 @@
|
||||
# This file was generated using idf.py save-defconfig. It can be edited manually.
|
||||
# Espressif IoT Development Framework (ESP-IDF) Project Minimal Configuration
|
||||
#
|
||||
CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y
|
||||
CONFIG_BT_ENABLED=y
|
||||
CONFIG_BT_NIMBLE_BLUFI_ENABLE=y
|
||||
# CONFIG_BT_GATTC_ENABLE is not set
|
||||
# CONFIG_BT_BLE_SMP_ENABLE is not set
|
||||
# CONFIG_BT_BLE_50_FEATURES_SUPPORTED is not set
|
||||
CONFIG_BT_BLE_42_FEATURES_SUPPORTED=y
|
||||
CONFIG_MBEDTLS_DHM_C=y
|
||||
# The config items for NIMBLE HOST
|
||||
CONFIG_BT_NIMBLE_ENABLED=y
|
||||
CONFIG_BT_NIMBLE_ROLE_CENTRAL=n
|
||||
CONFIG_BT_NIMBLE_ROLE_OBSERVER=n
|
||||
CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT=n
|
||||
CONFIG_BT_NIMBLE_SECURITY_ENABLE=n
|
||||
CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=n
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# BLE Peripheral with ICMP Echo-Reply
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Mesh Internal Communication Example
|
||||
|
||||
@ -22,5 +22,5 @@ Features Demonstrated
|
||||
Open project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings.
|
||||
|
||||
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are.
|
||||
The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.
|
||||
The pink represents root; the yellow represents layer 2; the red represents layer 3; the blue represents layer 4; the green represents layer 5; the white represents layer greater than 5.
|
||||
Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Mesh IP Internal Networking example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Mesh Manual Networking Example
|
||||
|
||||
@ -9,6 +9,6 @@ This example demonstrates how to scan a list of parent candidates, choose an app
|
||||
|
||||
Open project configuration menu (`idf.py menuconfig`) to configure the mesh network channel, router SSID, router password and mesh softAP settings.
|
||||
|
||||
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are. The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5.
|
||||
When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are. The pink represents root; the yellow represents layer 2; the red represents layer 3; the blue represents layer 4; the green represents layer 5; the white represents layer greater than 5.
|
||||
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# eth2ap Example
|
||||
(See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/release/v1.0/examples/eth2wifi).)
|
||||
@ -66,7 +66,7 @@ I (538) system_api: Base MAC address is not set, read default base MAC address f
|
||||
I (538) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
||||
I (568) wifi: wifi firmware version: ec61a20
|
||||
I (568) wifi: config NVS flash: enabled
|
||||
I (568) wifi: config nano formating: disabled
|
||||
I (568) wifi: config nano formatting: disabled
|
||||
I (568) wifi: Init dynamic tx buffer num: 32
|
||||
I (568) wifi: Init data frame dynamic rx buffer num: 32
|
||||
I (578) wifi: Init management frame dynamic rx buffer num: 32
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Simple Sniffer Example
|
||||
|
||||
@ -314,8 +314,8 @@ I (130566) cmd_pcap: .pcap file close done
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
- Make sure you have pluged in your SD card and mount it into filesystem before doing sniffer work or you will get error message like “Create file /sdcard/sniffer0.pcap failed”.
|
||||
- To protect the SD card, we recommand you to execute command `unmount sd` before you plug out your SD card.
|
||||
- Make sure you have plugged in your SD card and mount it into filesystem before doing sniffer work or you will get error message like “Create file /sdcard/sniffer0.pcap failed”.
|
||||
- To protect the SD card, we recommend you to execute command `unmount sd` before you plug out your SD card.
|
||||
- Make sure to run `esp32 apptrace` command before or immediately after a new sniffer task started when you try this example with JTAG. Otherwise the console will issue warning message `waiting for apptrace established` every 1 second. If the apptrace communication doesn't be established within 10 seconds (can be altered by macro `SNIFFER_APPTRACE_RETRY`), this sniffer command will failed with an error message `waiting for apptrace established timeout`.
|
||||
|
||||
(For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you as soon as possible.)
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# WiFi station to "Wired" interface L2 forwarder
|
||||
|
||||
|
||||
@ -20,9 +20,9 @@
|
||||
|
||||
examples/openthread/ot_br:
|
||||
enable:
|
||||
- if: SOC_WIFI_SUPPORTED == 1
|
||||
- if: SOC_WIFI_SUPPORTED == 1 and IDF_TARGET != "esp32c5"
|
||||
disable_test:
|
||||
- if: IDF_TARGET in ["esp32", "esp32c3", "esp32c2", "esp32c6", "esp32s2"]
|
||||
- if: IDF_TARGET in ["esp32", "esp32c3", "esp32c2", "esp32c6", "esp32s2", "esp32c5"]
|
||||
temporary: true
|
||||
reason: only test on esp32s3
|
||||
<<: *openthread_dependencies
|
||||
|
||||
@ -1,2 +1,3 @@
|
||||
CONFIG_MQTT_CUSTOM_OUTBOX=y
|
||||
CONFIG_COMPILER_CXX_EXCEPTIONS=y
|
||||
CONFIG_COMPILER_OPTIMIZATION_SIZE=y
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi Provisioning Manager Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# ESPNOW Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi Fast Scan Example
|
||||
|
||||
@ -57,7 +57,7 @@ As you run the example, you will see the following log:
|
||||
I (616) wifi:wifi firmware version: 6bff005
|
||||
I (616) wifi:wifi certification version: v7.0
|
||||
I (616) wifi:config NVS flash: enabled
|
||||
I (616) wifi:config nano formating: disabled
|
||||
I (616) wifi:config nano formatting: disabled
|
||||
I (626) wifi:Init data frame dynamic rx buffer num: 32
|
||||
I (626) wifi:Init management frame dynamic rx buffer num: 32
|
||||
I (636) wifi:Init management short buffer num: 32
|
||||
|
||||
@ -69,7 +69,7 @@ Issue `ftm -I` to initiate a session with default configuration of 32 FTM frames
|
||||
Where -
|
||||
* `-I` OR `--ftm_initiator`: FTM Initiator mode
|
||||
* `-c` OR `--frm_count`: FTM frames to be exchanged (Valid values: 0=No preference, 8, 16, 24, 32, 64, default: 32)
|
||||
* `-p` OR `--burst_period`: Periodicity of FTM bursts in 100's of miliseconds (0: No preference, default: 2)
|
||||
* `-p` OR `--burst_period`: Periodicity of FTM bursts in 100's of milliseconds (0: No preference, default: 2)
|
||||
* `-s` OR `--ssid=SSID`: SSID of AP that supports FTM Responder mode
|
||||
|
||||
Currently FTM is only supported in below configuration -
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi SoftAP Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi Station Example
|
||||
|
||||
@ -46,7 +46,7 @@ I (599) system_api: Base MAC address is not set, read default base MAC address f
|
||||
I (599) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
||||
I (629) wifi: wifi firmware version: 2d94f02
|
||||
I (629) wifi: config NVS flash: enabled
|
||||
I (629) wifi: config nano formating: disabled
|
||||
I (629) wifi: config nano formatting: disabled
|
||||
I (629) wifi: Init dynamic tx buffer num: 32
|
||||
I (629) wifi: Init data frame dynamic rx buffer num: 32
|
||||
I (639) wifi: Init management frame dynamic rx buffer num: 32
|
||||
@ -79,7 +79,7 @@ I (599) system_api: Base MAC address is not set, read default base MAC address f
|
||||
I (599) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
||||
I (629) wifi: wifi firmware version: 2d94f02
|
||||
I (629) wifi: config NVS flash: enabled
|
||||
I (629) wifi: config nano formating: disabled
|
||||
I (629) wifi: config nano formatting: disabled
|
||||
I (629) wifi: Init dynamic tx buffer num: 32
|
||||
I (629) wifi: Init data frame dynamic rx buffer num: 32
|
||||
I (639) wifi: Init management frame dynamic rx buffer num: 32
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Iperf Example
|
||||
|
||||
|
||||
@ -3,40 +3,40 @@
|
||||
#
|
||||
CONFIG_IDF_ENV_FPGA=n
|
||||
|
||||
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=40
|
||||
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=60
|
||||
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=40
|
||||
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=22
|
||||
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=48
|
||||
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=48
|
||||
CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
|
||||
CONFIG_ESP_WIFI_TX_BA_WIN=32
|
||||
CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
|
||||
CONFIG_ESP_WIFI_RX_BA_WIN=32
|
||||
CONFIG_ESP_WIFI_RX_BA_WIN=22
|
||||
CONFIG_ESP_WIFI_NVS_ENABLED=n
|
||||
|
||||
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=51200
|
||||
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=57600
|
||||
CONFIG_LWIP_TCP_WND_DEFAULT=65535
|
||||
CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
|
||||
CONFIG_LWIP_TCP_RECVMBOX_SIZE=48
|
||||
CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
|
||||
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
|
||||
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=48
|
||||
CONFIG_LWIP_IP_REASS_MAX_PBUFS=15
|
||||
|
||||
#
|
||||
# Serial flasher config
|
||||
#
|
||||
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
|
||||
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
|
||||
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
|
||||
|
||||
#
|
||||
# Wi-Fi
|
||||
#
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_TX_STATS=n
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_RX_STATS=n
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_RX_MU_STATS=n
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_TX_STATS=y
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_RX_STATS=y
|
||||
CONFIG_ESP_WIFI_ENABLE_WIFI_RX_MU_STATS=y
|
||||
CONFIG_ESP_WIFI_ENABLE_DUMP_HESIGB=n
|
||||
CONFIG_ESP_WIFI_ENABLE_DUMP_MU_CFO=n
|
||||
CONFIG_ESP_WIFI_ENABLE_DUMP_CTRL_NDPA=n
|
||||
CONFIG_ESP_WIFI_ENABLE_DUMP_CTRL_BFRP=n
|
||||
CONFIG_ESP_WIFI_SLP_IRAM_OPT=n
|
||||
CONFIG_LWIP_EXTRA_IRAM_OPTIMIZATION=y
|
||||
CONFIG_LWIP_EXTRA_IRAM_OPTIMIZATION=n
|
||||
|
||||
CONFIG_LWIP_TCPIP_CORE_LOCKING=y
|
||||
CONFIG_LWIP_TCPIP_CORE_LOCKING_INPUT=y
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32-C6 |
|
||||
| ----------------- | -------- |
|
||||
| Supported Targets | ESP32-C5 | ESP32-C6 |
|
||||
| ----------------- | -------- | -------- |
|
||||
|
||||
# Wifi itwt Example
|
||||
|
||||
|
||||
@ -119,7 +119,7 @@ static void got_ip_handler(void *arg, esp_event_base_t event_base,
|
||||
esp_wifi_sta_get_negotiated_phymode(&phymode);
|
||||
if (phymode == WIFI_PHY_MODE_HE20) {
|
||||
esp_err_t err = ESP_OK;
|
||||
wifi_twt_setup_config_t setup_config = {
|
||||
wifi_itwt_setup_config_t setup_config = {
|
||||
.setup_cmd = TWT_REQUEST,
|
||||
.flow_id = 0,
|
||||
.twt_id = CONFIG_EXAMPLE_ITWT_ID,
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wifi Power Save Example
|
||||
|
||||
|
||||
@ -1,6 +1,5 @@
|
||||
# SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
import logging
|
||||
|
||||
import pexpect
|
||||
@ -47,6 +46,7 @@ def _run_test(dut: Dut) -> None:
|
||||
@pytest.mark.esp32c3
|
||||
@pytest.mark.esp32s3
|
||||
@pytest.mark.esp32c6
|
||||
@pytest.mark.esp32c5
|
||||
@pytest.mark.wifi_ap
|
||||
def test_wifi_power_save(dut: Dut) -> None:
|
||||
_run_test(dut)
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Roaming Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi Station Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi Scan Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# smartconfig Example
|
||||
|
||||
|
||||
@ -1,12 +1,12 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi SoftAP & Station Example
|
||||
|
||||
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
||||
|
||||
This example demonstrates how to use the ESP Wi-Fi driver to act as both an Access Point and a Station simultaneously using the SoftAP and Station features.
|
||||
With NAPT enabled on the softAP interface and the station interface set as the defaut interface this example can be used as Wifi nat router.
|
||||
With NAPT enabled on the softAP interface and the station interface set as the default interface this example can be used as Wifi nat router.
|
||||
|
||||
## How to use example
|
||||
### Configure the project
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# WPA2 Enterprise Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Device Provisioning Protocol (Enrollee) Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
|
||||
# Understanding different WiFi enterprise modes:
|
||||
@ -55,7 +55,7 @@ idf.py -p PORT flash monitor
|
||||
|
||||
## Steps to create enterprise openssl certs
|
||||
|
||||
1. make directry tree
|
||||
1. make directory tree
|
||||
```
|
||||
mkdir demoCA
|
||||
mkdir demoCA/newcerts
|
||||
@ -86,7 +86,7 @@ idf.py -p PORT flash monitor
|
||||
openssl req -new -key client.key -out client.csr
|
||||
openssl req -new -key server.key -out server.csr
|
||||
```
|
||||
5. create certs (.crt) for client nd server
|
||||
5. create certs (.crt) for client and server
|
||||
```
|
||||
openssl ca -batch -keyfile ca.key -cert ca.pem -in client.csr -key (password) -out client.crt -extensions xpclient_ext -extfile xpextensions
|
||||
openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key (password) -out server.crt -extensions xpserver_ext -extfile xpextensions
|
||||
@ -158,7 +158,7 @@ I (635) wifi:wifi driver task: 3ffbf930, prio:23, stack:6656, core=0
|
||||
I (635) wifi:wifi firmware version: e03c1ca
|
||||
I (635) wifi:wifi certification version: v7.0
|
||||
I (635) wifi:config NVS flash: enabled
|
||||
I (635) wifi:config nano formating: disabled
|
||||
I (635) wifi:config nano formatting: disabled
|
||||
I (645) wifi:Init data frame dynamic rx buffer num: 32
|
||||
I (645) wifi:Init management frame dynamic rx buffer num: 32
|
||||
I (655) wifi:Init management short buffer num: 32
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi WPS Example
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# Wi-Fi WPS Registrar Example
|
||||
|
||||
|
||||
@ -8,8 +8,8 @@
|
||||
|
||||
examples/zigbee/esp_zigbee_gateway:
|
||||
enable:
|
||||
- if: SOC_WIFI_SUPPORTED == 1 and IDF_TARGET != "esp32c2"
|
||||
reason: not supported esp32c2
|
||||
- if: SOC_WIFI_SUPPORTED == 1 and IDF_TARGET not in ["esp32c2", "esp32c5"]
|
||||
reason: not supported esp32c2 and esp32c5
|
||||
<<: *zigbee_dependencies
|
||||
|
||||
examples/zigbee/esp_zigbee_rcp:
|
||||
|
||||
@ -116,7 +116,7 @@ void app_main(void)
|
||||
esp_wifi_ap_get_sta_list_with_ip(NULL, NULL);
|
||||
|
||||
esp_wifi_sta_itwt_setup_IgnoreAndReturn(ESP_OK);
|
||||
esp_wifi_sta_itwt_setup((wifi_twt_setup_config_t*) NULL);
|
||||
esp_wifi_sta_itwt_setup((wifi_itwt_setup_config_t*) NULL);
|
||||
|
||||
sc_send_ack_stop_Ignore();
|
||||
sc_send_ack_stop();
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
# I2C-WIFI Test
|
||||
|
||||
@ -73,7 +73,7 @@ I (379) system_api: read default base MAC address from EFUSE
|
||||
I (379) wifi:wifi firmware version: d062fdb
|
||||
I (389) wifi:wifi certification version: v7.0
|
||||
I (389) wifi:config NVS flash: enabled
|
||||
I (389) wifi:config nano formating: disabled
|
||||
I (389) wifi:config nano formatting: disabled
|
||||
I (399) wifi:Init data frame dynamic rx buffer num: 32
|
||||
I (399) wifi:Init management frame dynamic rx buffer num: 32
|
||||
I (409) wifi:Init management short buffer num: 32
|
||||
|
||||
@ -10,6 +10,7 @@ from pytest_embedded_idf.dut import IdfDut
|
||||
@pytest.mark.esp32c6
|
||||
@pytest.mark.esp32s2
|
||||
@pytest.mark.esp32s3
|
||||
@pytest.mark.esp32c5
|
||||
@pytest.mark.generic
|
||||
def test_i2c_wifi_startup(dut: IdfDut) -> None:
|
||||
dut.expect_exact('I2C-WIFI test success')
|
||||
|
||||
@ -3,6 +3,9 @@
|
||||
tools/test_apps/phy/phy_multi_init_data_test:
|
||||
disable:
|
||||
- if: SOC_WIFI_SUPPORTED != 1
|
||||
disable_test:
|
||||
- if: IDF_TARGET in ["esp32c5"]
|
||||
reason: lack of runner
|
||||
|
||||
tools/test_apps/phy/phy_tsens:
|
||||
disable:
|
||||
|
||||
@ -1,2 +1,2 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
|
||||
|
||||
Loading…
Reference in New Issue
Block a user