refactor(ci): removed unnecessary hal and soc mock header files

components/esp_rom/CMakeLists.txt

@@ -11,7 +11,6 @@ if(target STREQUAL "linux")
                         "${target}/esp_rom_crc.c"
                         "${target}/esp_rom_md5.c"
                         "${target}/esp_rom_efuse.c")
-    list(APPEND include_dirs "${IDF_PATH}/tools/mocks/soc/include")
 else()
     list(APPEND include_dirs "${target}")
     list(APPEND sources "patches/esp_rom_crc.c"

components/soc/linux/include/soc/Kconfig.soc_caps.in

@@ -10,3 +10,11 @@ config SOC_GPIO_IN_RANGE_MAX
 config SOC_GPIO_OUT_RANGE_MAX
     int
     default 65535
+
+config SOC_I2C_SUPPORT_SLAVE
+    bool
+    default y
+
+config SOC_I2C_SUPPORT_10BIT_ADDR
+    bool
+    default y

components/soc/linux/include/soc/clk_tree_defs.h

@@ -0,0 +1,27 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+/**
+ * Mock definitions for running on the host.
+ */
+
+/**
+ * @brief Supported clock sources for modules (CPU, peripherals, RTC, etc.)
+ *
+ * @note enum starts from 1, to save 0 for special purpose
+ */
+typedef enum {
+    SOC_MOD_CLK_APB = 1,
+} soc_module_clk_t;
+
+/**
+ * @brief Type of SPI clock source.
+ */
+typedef enum {
+    SPI_CLK_SRC_DEFAULT = SOC_MOD_CLK_APB,
+    SPI_CLK_SRC_APB = SOC_MOD_CLK_APB,
+} soc_periph_spi_clk_src_t;

components/soc/linux/include/soc/gpio_pins.h

@@ -0,0 +1,9 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/**
+ * NOTE: this is a stripped-down copy to support building on host when using mocking (CMock).
+ */

components/soc/linux/include/soc/soc_caps.h

@@ -22,8 +22,17 @@
  *
 */
 
+/*
+ * NOTE: These definitions are only meant to allow host-based unit testing of some features using CMock.
+ * They DO NOT imply any functionality on the host.
+ */
+
 #pragma once
 
-// No meaning to define GPIO number for Linux target, only to avoid build warning on Kconfig ESP_CONSOLE_UART_TX_GPIO, ESP_CONSOLE_UART_RX_GPIO
+/*-------------------------- GPIO CAPS ---------------------------------------*/
 #define SOC_GPIO_IN_RANGE_MAX           (65535)
 #define SOC_GPIO_OUT_RANGE_MAX          (65535)
+
+/*-------------------------- I2C CAPS ----------------------------------------*/
+#define SOC_I2C_SUPPORT_SLAVE   (1)
+#define SOC_I2C_SUPPORT_10BIT_ADDR   (1)

tools/mocks/driver/CMakeLists.txt

@@ -14,11 +14,12 @@ set(include_dirs
     "${original_driver_dir}/usb_serial_jtag/include/driver"
     "${original_driver_dir}/i2c/include"
     "${original_driver_dir}/rmt/include"
-    "${original_driver_dir}/usb_serial_jtag/include"
+    "${original_driver_dir}/usb_serial_jtag/include")
-    "${CMAKE_CURRENT_SOURCE_DIR}/../hal/include")
 
+# Note: "hal" and "soc" are only required for corresponding header files and their definitions
+# here, they don't provide functionality when built for running on the host.
 idf_component_mock(INCLUDE_DIRS ${include_dirs}
-    REQUIRES freertos
+    REQUIRES freertos hal soc
     MOCK_HEADER_FILES
     ${IDF_PATH}/components/esp_driver_gpio/include/driver/gpio.h
     ${IDF_PATH}/components/esp_driver_spi/include/driver/spi_master.h
@@ -29,5 +30,3 @@ idf_component_mock(INCLUDE_DIRS ${include_dirs}
     ${original_driver_dir}/rmt/include/driver/rmt_common.h
     ${original_driver_dir}/rmt/include/driver/rmt_encoder.h
     ${original_driver_dir}/usb_serial_jtag/include/driver/usb_serial_jtag.h)
-
-target_compile_definitions(${COMPONENT_LIB} PUBLIC SOC_I2C_NUM=2)

tools/mocks/hal/include/hal/i2c_types.h

@@ -1,63 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/**
- * NOTE: this is not the original header file from the hal component. It is a stripped-down copy to support mocking.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief I2C port number, can be I2C_NUM_0 ~ (I2C_NUM_MAX-1).
- */
-typedef enum {
-    I2C_NUM_0 = 0, /*!< I2C port 0 */
-#if SOC_I2C_NUM >= 2
-    I2C_NUM_1, /*!< I2C port 1 */
-#endif
-    I2C_NUM_MAX, /*!< I2C port max */
-} i2c_port_t;
-
-typedef enum{
-    I2C_MODE_SLAVE = 0,   /*!< I2C slave mode */
-    I2C_MODE_MASTER,      /*!< I2C master mode */
-    I2C_MODE_MAX,
-} i2c_mode_t;
-
-typedef enum {
-    I2C_MASTER_WRITE = 0,   /*!< I2C write data */
-    I2C_MASTER_READ,        /*!< I2C read data */
-} i2c_rw_t;
-
-typedef enum {
-    I2C_DATA_MODE_MSB_FIRST = 0,  /*!< I2C data msb first */
-    I2C_DATA_MODE_LSB_FIRST = 1,  /*!< I2C data lsb first */
-    I2C_DATA_MODE_MAX
-} i2c_trans_mode_t;
-
-typedef enum {
-    I2C_ADDR_BIT_7 = 0,    /*!< I2C 7bit address for slave mode */
-    I2C_ADDR_BIT_10,       /*!< I2C 10bit address for slave mode */
-    I2C_ADDR_BIT_MAX,
-} i2c_addr_mode_t;
-
-typedef enum {
-    I2C_MASTER_ACK = 0x0,        /*!< I2C ack for each byte read */
-    I2C_MASTER_NACK = 0x1,       /*!< I2C nack for each byte read */
-    I2C_MASTER_LAST_NACK = 0x2,   /*!< I2C nack for the last byte*/
-    I2C_MASTER_ACK_MAX,
-} i2c_ack_type_t;
-
-#ifdef __cplusplus
-}
-#endif

tools/mocks/hal/include/hal/rmt_types.h

@@ -1,31 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/**
- * NOTE: this is not the original header file from the hal component. It is a stripped-down copy to support mocking.
- */
-
-#pragma once
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef int rmt_clock_source_t;
-
-typedef union {
-    struct {
-        unsigned int duration0 : 15; /*!< Duration of level0 */
-        unsigned int level0 : 1;     /*!< Level of the first part */
-        unsigned int duration1 : 15; /*!< Duration of level1 */
-        unsigned int level1 : 1;     /*!< Level of the second part */
-    };
-    unsigned int val; /*!< Equivalent unsigned value for the RMT symbol */
-} rmt_symbol_word_t;
-
-#ifdef __cplusplus
-}
-#endif

tools/mocks/hal/include/hal/spi_types.h

@@ -1,34 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/**
- * NOTE: this is not the original header file from the hal component. It is a stripped-down copy to support mocking.
- */
-
-#pragma once
-
-/**
- * @brief Enum with the three SPI peripherals that are software-accessible in it
- */
-typedef enum {
-// SPI_HOST (SPI1_HOST) is not supported by the SPI Master and SPI Slave driver on ESP32-S2
-    SPI1_HOST=0,    ///< SPI1
-    SPI2_HOST=1,    ///< SPI2
-    SPI3_HOST=2,    ///< SPI3
-    SPI_HOST_MAX=3,   ///< invalid host value
-} spi_host_device_t;
-
-/**
- * @brief Type of SPI clock source.
- */
-typedef enum {
-    SPI_CLK_SRC_DEFAULT,     /*!< Select PLL as SPI source clock */
-    SPI_CLK_SRC_PLL_F40M,     /*!< Select PLL as SPI source clock */
-    SPI_CLK_SRC_PLL_F80M,     /*!< Select PLL as SPI source clock */
-    SPI_CLK_SRC_APB,         /*!< Select APB as SPI source clock */
-    SPI_CLK_SRC_XTAL,        /*!< Select XTAL as SPI source clock */
-    SPI_CLK_SRC_RC_FAST,     /*!< Select RC_FAST as SPI source clock */
-} spi_clock_source_t;

tools/mocks/soc/include/soc/clk_tree_defs.h

@@ -1,19 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-#pragma once
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @brief Type of SPI clock source.
- */
-typedef int soc_periph_spi_clk_src_t;
-
-#ifdef __cplusplus
-}
-#endif

tools/mocks/soc/include/soc/gpio_pins.h

@@ -1,9 +0,0 @@
-/*
- * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/**
- * NOTE: this is not the original header file from the soc component. It is a stripped-down copy to support mocking.
- */

tools/test_apps/linux_compatible/driver_mock/main/driver_mock_main.c

@@ -17,7 +17,7 @@
 #include "Mockrmt_tx.h"
 #include "Mockrmt_rx.h"
 
-/*Test that mock functions exist*/
+/* Test that mock functions exist and that required definitions are available */
 void app_main(void)
 {
     i2c_driver_delete(0);
@@ -26,6 +26,42 @@ void app_main(void)
     int gpio_num = GPIO_NUM_39;
     (void)gpio_num;
 
+    spi_host_device_t spi_dev = SPI1_HOST;
+    spi_dev = SPI2_HOST;
+    (void)spi_dev;
+    spi_clock_source_t spi_default_clock = SPI_CLK_SRC_DEFAULT;
+    (void)spi_default_clock;
+    soc_periph_spi_clk_src_t soc_periph_spi_clk_src = 0;
+    (void)soc_periph_spi_clk_src;
+
+    rmt_clock_source_t rmt_clk_source = 0;
+    (void)rmt_clk_source;
+    rmt_symbol_word_t rm_symbol_word = { .duration0 = 47, .level0 = 0, .duration1 = 47, .level1 = 1 };
+    (void)rm_symbol_word;
+
+    i2c_port_t i2c_port = I2C_NUM_0;
+    (void)i2c_port;
+    i2c_mode_t i2c_mode = I2C_MODE_MASTER;
+    i2c_mode = I2C_MODE_SLAVE;
+    (void)i2c_mode;
+    i2c_rw_t i2c_rw = I2C_MASTER_WRITE;
+    i2c_rw = I2C_MASTER_READ;
+    (void)i2c_rw;
+    i2c_trans_mode_t i2c = I2C_DATA_MODE_MSB_FIRST;
+    i2c = I2C_DATA_MODE_LSB_FIRST;
+    (void)i2c;
+    i2c_addr_bit_len_t i2c_addr_bit_len = I2C_ADDR_BIT_LEN_7;
+
+    #if SOC_I2C_SUPPORT_10BIT_ADDR
+    i2c_addr_bit_len = I2C_ADDR_BIT_LEN_10;
+    #endif
+
+    (void)i2c_addr_bit_len;
+    i2c_ack_type_t i2c_ack = I2C_MASTER_ACK;
+    i2c_ack = I2C_MASTER_NACK;
+    i2c_ack = I2C_MASTER_LAST_NACK;
+    (void)i2c_ack;
+
     rmt_channel_handle_t channel = 0;
     rmt_new_bytes_encoder(NULL, NULL);
     rmt_new_rx_channel(NULL, NULL);