Merge branch 'backport/backport_ci_for_zigbee' into 'release/v5.1'

feat(zigbee): Update Zigbee examples based on latest library (Backport v5.1)

See merge request espressif/esp-idf!24792

examples/zigbee/esp_zigbee_gateway/main/esp_zigbee_gateway.c

@@ -35,6 +35,7 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <fcntl.h>
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
@@ -46,12 +47,41 @@
 #include "esp_coexist_internal.h"
 #include "esp_zigbee_gateway.h"
 
+#include "esp_vfs_dev.h"
+#include "esp_vfs_usb_serial_jtag.h"
+#include "driver/usb_serial_jtag.h"
+
 #if (!defined ZB_MACSPLIT_HOST && defined ZB_MACSPLIT_DEVICE)
 #error Only Zigbee gateway host device should be defined
 #endif
 
 static const char *TAG = "ESP_ZB_GATEWAY";
 
+/* Note: Please select the correct console output port based on the development board in menuconfig */
+#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+esp_err_t esp_zb_gateway_console_init(void)
+{
+    esp_err_t ret = ESP_OK;
+    /* Disable buffering on stdin */
+    setvbuf(stdin, NULL, _IONBF, 0);
+
+    /* Minicom, screen, idf_monitor send CR when ENTER key is pressed */
+    esp_vfs_dev_usb_serial_jtag_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
+    /* Move the caret to the beginning of the next line on '\n' */
+    esp_vfs_dev_usb_serial_jtag_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
+
+    /* Enable non-blocking mode on stdin and stdout */
+    fcntl(fileno(stdout), F_SETFL, O_NONBLOCK);
+    fcntl(fileno(stdin), F_SETFL, O_NONBLOCK);
+
+    usb_serial_jtag_driver_config_t usb_serial_jtag_config = USB_SERIAL_JTAG_DRIVER_CONFIG_DEFAULT();
+    ret = usb_serial_jtag_driver_install(&usb_serial_jtag_config);
+    esp_vfs_usb_serial_jtag_use_driver();
+    esp_vfs_dev_uart_register();
+    return ret;
+}
+#endif
+
 /********************* Define functions **************************/
 static void bdb_start_top_level_commissioning_cb(uint8_t mode_mask)
 {
@@ -136,6 +166,9 @@ void app_main(void)
     ESP_ERROR_CHECK(nvs_flash_init());
     ESP_ERROR_CHECK(esp_netif_init());
     ESP_ERROR_CHECK(esp_event_loop_create_default());
+#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+    ESP_ERROR_CHECK(esp_zb_gateway_console_init());
+#endif
 #if CONFIG_EXAMPLE_CONNECT_WIFI
     ESP_ERROR_CHECK(example_connect());
 #if CONFIG_ESP_COEX_SW_COEXIST_ENABLE

examples/zigbee/esp_zigbee_gateway/main/idf_component.yml

@@ -1,7 +1,7 @@
 ## IDF Component Manager Manifest File
 dependencies:
-  espressif/esp-zboss-lib: "~0.4.0"
-  espressif/esp-zigbee-lib: "~0.5.0"
+  espressif/esp-zboss-lib: "~0.5.0"
+  espressif/esp-zigbee-lib: "~0.7.0"
   ## Required IDF version
   idf:
     version: ">=5.0.0"

examples/zigbee/esp_zigbee_rcp/main/idf_component.yml

@@ -1,7 +1,7 @@
 ## IDF Component Manager Manifest File
 dependencies:
-  espressif/esp-zboss-lib: "~0.4.0"
-  espressif/esp-zigbee-lib: "~0.5.0"
+  espressif/esp-zboss-lib: "~0.5.0"
+  espressif/esp-zigbee-lib: "~0.7.0"
   ## Required IDF version
   idf:
     version: ">=5.0.0"

examples/zigbee/light_sample/HA_on_off_light/main/esp_zb_light.h

@@ -43,8 +43,7 @@
 #define ED_AGING_TIMEOUT                ESP_ZB_ED_AGING_TIMEOUT_64MIN
 #define ED_KEEP_ALIVE                   3000    /* 3000 millisecond */
 #define HA_ESP_LIGHT_ENDPOINT           10    /* esp light bulb device endpoint, used to process light controlling commands */
-#define ESP_ZB_PRIMARY_CHANNEL_MASK     (1l << 13)  /* Zigbee primary channel mask use in the example */
-
+#define ESP_ZB_PRIMARY_CHANNEL_MASK     ESP_ZB_TRANSCEIVER_ALL_CHANNELS_MASK  /* Zigbee primary channel mask use in the example */
 #define ESP_ZB_ZED_CONFIG()                                         \
     {                                                               \
         .esp_zb_role = ESP_ZB_DEVICE_TYPE_ED,                       \

examples/zigbee/light_sample/HA_on_off_light/main/idf_component.yml

@@ -1,7 +1,7 @@
 ## IDF Component Manager Manifest File
 dependencies:
-  espressif/esp-zigbee-lib: "~0.5.0"
-  espressif/esp-zboss-lib: "~0.4.0"
+  espressif/esp-zigbee-lib: "~0.7.0"
+  espressif/esp-zboss-lib: "~0.5.0"
   espressif/led_strip: "~2.0.0"
   ## Required IDF version
   idf:

examples/zigbee/light_sample/HA_on_off_switch/main/esp_zb_switch.h

@@ -41,7 +41,7 @@
 #define MAX_CHILDREN                    10          /* the max amount of connected devices */
 #define INSTALLCODE_POLICY_ENABLE       false    /* enable the install code policy for security */
 #define HA_ONOFF_SWITCH_ENDPOINT        1          /* esp light switch device endpoint */
-#define ESP_ZB_PRIMARY_CHANNEL_MASK     (1l << 13)  /* Zigbee primary channel mask use in the example */
+#define ESP_ZB_PRIMARY_CHANNEL_MASK     ESP_ZB_TRANSCEIVER_ALL_CHANNELS_MASK  /* Zigbee primary channel mask use in the example */
 
 #define ESP_ZB_ZC_CONFIG()                                                              \
     {                                                                                   \

examples/zigbee/light_sample/HA_on_off_switch/main/idf_component.yml

@@ -1,7 +1,7 @@
 ## IDF Component Manager Manifest File
 dependencies:
-  espressif/esp-zigbee-lib: "~0.5.0"
-  espressif/esp-zboss-lib: "~0.4.0"
+  espressif/esp-zigbee-lib: "~0.7.0"
+  espressif/esp-zboss-lib: "~0.5.0"
   ## Required IDF version
   idf:
     version: ">=5.0.0"