alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-09-20 00:36:01 -04:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

docs: fix uart number naming error

Browse Source
This commit is contained in:
Marius Vikhammer 2021-01-20 10:34:35 +08:00
parent 654d4b8d72
commit 7a8a026b1d
1 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
docs/en/api-reference/peripherals/uart.rst
View File

@ -1,7 +1,7 @@
UART
====
{IDF_TARGET_UART_NUM:default = "UART1", esp32 = "UART2", esp32s2 = "UART1"}
{IDF_TARGET_UART_NUM:default = "UART_NUM_1", esp32 = "UART_NUM_2", esp32s2 = "UART_NUM_1"}
Overview
--------
@ -10,11 +10,11 @@ A Universal Asynchronous Receiver/Transmitter (UART) is a hardware feature that
.. only:: esp32
The ESP32 chip has three UART controllers (UART0, UART1, and UART2) that feature an identical set of registers for ease of programming and flexibility.
The ESP32 chip has three UART controllers (UART0, UART1, and UART2) that feature an identical set of registers for ease of programming and flexibility.
.. only:: esp32s2
The ESP32-S2 chip has two UART controllers (UART0 and UART1) that feature an identical set of registers for ease of programming and flexibility.
The ESP32-S2 chip has two UART controllers (UART0 and UART1) that feature an identical set of registers for ease of programming and flexibility.
Each UART controller is independently configurable with parameters such as baud rate, data bit length, bit ordering, number of stop bits, parity bit etc. All the controllers are compatible with UART-enabled devices from various manufacturers and can also support Infrared Data Association protocols (IrDA).
@ -99,21 +99,21 @@ After setting communication parameters, configure the physical GPIO pins to whic
The same macro should be specified for pins that will not be used.
.. code-block:: c
.. only:: esp32
::
.. code-block:: c
// Set UART pins(TX: IO16 (UART2 default), RX: IO17 (UART2 default), RTS: IO18, CTS: IO19)
ESP_ERROR_CHECK(uart_set_pin(UART_NUM_2, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, 18, 19));
// Set UART pins(TX: IO16 (UART2 default), RX: IO17 (UART2 default), RTS: IO18, CTS: IO19)
ESP_ERROR_CHECK(uart_set_pin(UART_NUM_2, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, 18, 19));
.. only:: esp32s2
::
.. code-block:: c
// Set UART pins(TX: IO17 (UART1 default), RX: IO18 (UART1 default), RTS: IO19, CTS: IO20)
ESP_ERROR_CHECK(uart_set_pin(UART_NUM_1, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, 19, 20));
// Set UART pins(TX: IO17 (UART1 default), RX: IO18 (UART1 default), RTS: IO19, CTS: IO20)
ESP_ERROR_CHECK(uart_set_pin(UART_NUM_1, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, 19, 20));
.. _uart-api-driver-installation:
@ -189,7 +189,7 @@ There is a 'companion' function :cpp:func:`uart_wait_tx_done` that monitors the
.. code-block:: c
// Wait for packet to be sent
const int uart_num = UART_NUM_2;
const int uart_num = {IDF_TARGET_UART_NUM};
ESP_ERROR_CHECK(uart_wait_tx_done(uart_num, 100)); // wait timeout is 100 RTOS ticks (TickType_t)
@ -354,7 +354,7 @@ Circuit C: Auto Switching Transmitter/Receiver
10K ____ | | | |
+---|____|--+ +---x-----------x---+ 10K ____ |
| | | +---|____|--+
RX <----------+-------------------| RXD | |
RX <----------+-------------------| RXD | |
10K ____ | A|---+---------------<> A (+)
+-------|____|------| PV ADM2483 | | ____ 120
| ____ | | +---|____|---+ RS485 bus side