alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

esp32h2/kconfig: remove repeated kconfig

Browse Source
This commit is contained in:
jingli 2022-08-11 15:02:46 +08:00
parent 4bf8f462a2
commit 6368633102
2 changed files with 2 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
components/esp32h2/Kconfig
View File

@ -179,23 +179,4 @@ menu "ESP32H2-Specific"
If enabled, this disables the linking of binary libraries in the application build. Note
that after enabling this Wi-Fi/Bluetooth will not work.
config ESP32H2_LIGHTSLEEP_GPIO_RESET_WORKAROUND
bool "light sleep GPIO reset workaround"
default y
select PM_SLP_DISABLE_GPIO if FREERTOS_USE_TICKLESS_IDLE
help
ESP32H2 will reset at wake-up if GPIO is received a small electrostatic pulse during
light sleep, with specific condition
- GPIO needs to be configured as input-mode only
- The pin receives a small electrostatic pulse, and reset occurs when the pulse
voltage is higher than 6 V
For GPIO set to input mode only, it is not a good practice to leave it open/floating,
The hardware design needs to controlled it with determined supply or ground voltage
is necessary.
This option provides a software workaround for this issue. Configure to isolate all
GPIO pins in sleep state.
endmenu # ESP32H2-Specific

4
components/esp_hw_support/Kconfig
View File

@ -38,10 +38,10 @@ menu "Hardware Settings"
config ESP_SLEEP_GPIO_RESET_WORKAROUND
bool "light sleep GPIO reset workaround"
default y if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
default y if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32H2
select PM_SLP_DISABLE_GPIO if FREERTOS_USE_TICKLESS_IDLE
help
esp32c3 and esp32s3 will reset at wake-up if GPIO is received a small electrostatic
esp32c3, esp32s3 and esp32h2 will reset at wake-up if GPIO is received a small electrostatic
pulse during light sleep, with specific condition
- GPIO needs to be configured as input-mode only