alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

esptool: Update to latest v2.0 beta version

Browse Source 
* New "espefuse.py set_flash_voltage" command to easily set a fix
  VDD_SDIO regulator voltage (1.8V, 3.3V or disabled).
* Fixes bugs when flashing files with non-4-byte aligned lengths
  (doesn't effect esp-idf image files)
* README improvements
This commit is contained in:
Angus Gratton 2017-02-03 16:08:17 +11:00
parent ccbc6183c3
commit 5ea9097dbd
2 changed files with 13 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
components/esptool_py/esptool

@ -1 +1 @@
Subproject commit e9e9179f6fc3f2ecfc568987d3224b5e53a05f06 Subproject commit c1d00094d564451636b01308625119901e2257ac

25
examples/storage/sd_card/README.md
View File

@ -37,25 +37,24 @@ GPIO2 pin is used as a bootstrapping pin, and should be low to enter UART downlo
### Note about GPIO12 ### Note about GPIO12
GPIO12 is used as a bootstrapping pin to select output voltage of an internal regulator which powers the flash chip. GPIO12 is used as a bootstrapping pin to select output voltage of an internal regulator which powers the flash chip (VDD_SDIO). This pin has an internal pulldown so if left unconnected it will read low at reset (selecting default 3.3V operation). When adding a pullup to this pin for SD card operation, consider the following:
- For boards which don't use the internal regulator, GPIO12 can be pulled high. - For boards which don't use the internal regulator (VDD_SDIO) to power the flash, GPIO12 can be pulled high.
- On boards which use the internal regulator and a 3.3V flash chip, GPIO12 should be pulled up high, which is compatible with SD card operation. - For boards which use 1.8V flash chip, GPIO12 needs to be pulled high at reset. This is fully compatible with SD card operation.
- For boards which use 3.3V flash chip, GPIO12 needs to be low at reset. - On boards which use the internal regulator and a 3.3V flash chip, GPIO12 must be low at reset. This is incompatible with SD card operation.
* In this case, internal pullup can be enabled using a `gpio_pullup_en(GPIO_NUM_12);` call. Most SD cards work fine when an internal pullup on GPIO12 line is enabled. Note that if ESP32 experiences a power-on reset while the SD card is sending data, high level on GPIO12 can be latched into the bootstrapping register, and ESP32 will enter a boot loop until external reset with correct GPIO12 level is applied. * In most cases, external pullup can be omitted and an internal pullup can be enabled using a `gpio_pullup_en(GPIO_NUM_12);` call. Most SD cards work fine when an internal pullup on GPIO12 line is enabled. Note that if ESP32 experiences a power-on reset while the SD card is sending data, high level on GPIO12 can be latched into the bootstrapping register, and ESP32 will enter a boot loop until external reset with correct GPIO12 level is applied.
* Another option is to program flash voltage selection efuses: set `XPD_SDIO_TIEH=1`, `XPD_SDIO_FORCE=1`, and `XPD_SDIO_REG = 1`. This will permanently select 3.3V output voltage for the internal regulator, and GPIO12 will not be used as a bootstrapping pin anymore. Then it is safe to connect a pullup resistor to GPIO12. This option is suggested for production use. * Another option is to burn the flash voltage selection efuses. This will permanently select 3.3V output voltage for the internal regulator, and GPIO12 will not be used as a bootstrapping pin. Then it is safe to connect a pullup resistor to GPIO12. This option is suggested for production use.
The following commands can be used to program flash voltage selection efuses **to 3.3V**: The following command can be used to program flash voltage selection efuses **to 3.3V**:
```sh ```sh
# Override flash regulator configuration using efuses components/esptool_py/esptool/espefuse.py set_flash_voltage 3.3V
components/esptool_py/esptool/espefuse.py burn_efuse XPD_SDIO_FORCE
# Select 3.3V output voltage
components/esptool_py/esptool/espefuse.py burn_efuse XPD_SDIO_TIEH
# Enable internal voltage regulator
components/esptool_py/esptool/espefuse.py burn_efuse XPD_SDIO_REG
``` ```
This command will burn the `XPD_SDIO_TIEH`, `XPD_SDIO_FORCE`, and `XPD_SDIO_REG` efuses. With all three burned to value 1, the internal VDD_SDIO flash voltage regulator is permanently enabled at 3.3V. See the technical reference manual for more details.
`espefuse.py` has a `--do-not-confirm` option if running from an automated flashing script.
## 4-line and 1-line modes ## 4-line and 1-line modes
By default, example code uses the following initializer for SDMMC host peripheral configuration: By default, example code uses the following initializer for SDMMC host peripheral configuration: