From 5d4a78635447490e9545eccc39d7756be8af659b Mon Sep 17 00:00:00 2001 From: Lou Tianhao Date: Mon, 27 Nov 2023 14:31:37 +0800 Subject: [PATCH] docs(pm):change_deepsleep_example_readme --- examples/system/deep_sleep/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/examples/system/deep_sleep/README.md b/examples/system/deep_sleep/README.md index 45cc87ad92..d88548380d 100644 --- a/examples/system/deep_sleep/README.md +++ b/examples/system/deep_sleep/README.md @@ -11,8 +11,8 @@ The following wake up sources are demonstrated in this example (refer to the [Wa - **Timer:** An RTC timer that can be programmed to trigger a wake up after a preset time. This example will trigger a wake up every 20 seconds. - **EXT0:** External wake up 0 can trigger wakeup when one predefined RTC GPIO is at a predefined logic level. This example uses GPIO25 in ESP32 or GPIO3 in ESP32-S2/S3 to trigger a wake up when the pin is HIGH. (This wake up source is only available on ESP32, ESP32-S2, and ESP32-S3.) -- **EXT1:** External wake up 1 which is tied to multiple RTC GPIOs. This example uses GPIO2 and GPIO4 to trigger a wake up with any one of the two pins are HIGH. (This wake up source is available on ESP32, ESP32-S2, ESP32-S3 and ESP32-C6.) -- **GPIO:** Pads powered by VDD3P3_RTC can be used to trigger a wake up from deep sleep. You may choose the pin and trigger level in menuconfig. (This wake up source is unavailable on ESP32, ESP32-S2, and ESP32-S3.) +- **EXT1:** External wake up 1 which is tied to multiple RTC GPIOs. This example uses GPIO2 and GPIO4 to trigger a wake up with any one of the two pins are HIGH. (This wake up source is available on ESP32, ESP32-S2, ESP32-S3, ESP32-C6 and ESP32-H2.) +- **GPIO:** Pads powered by VDD3P3_RTC can be used to trigger a wake up from deep sleep. You may choose the pin and trigger level in menuconfig. (This wake up source is unavailable on ESP32, ESP32-S2, ESP32-S3 and ESP32-H2.) - **Touch:** Touch pad sensor interrupt. This example uses touch pads connected to GPIO32, GPIO33 in ESP32 or GPIO9 in ESP32-S2/S3 to trigger a wake up when any of the pads are pressed. - **ULP:** Ultra Low Power Coprocessor which can continue to run during deep sleep. This example utilizes the ULP and constantly sample the chip's temperature and trigger a wake up if the chips temperature exceeds ~5 degrees Celsius.