uart: fix uart_tx_wait_idle to wait for fifo empty

In some cases, when data was just written into UART FIFO, transmitter
state could be still zero while the FIFO did contain some data.
This resulted in uart_tx_wait_idle occasionally returning before all
the data was sent out.
Fix by checking both UART transmitter state and TX FIFO count.
This commit is contained in:
Ivan Grokhotkov 2018-10-15 20:08:16 +08:00
parent 88625a2501
commit 508fb79a26
2 changed files with 8 additions and 4 deletions

View File

@ -267,9 +267,11 @@ void uart_tx_flush(uint8_t uart_no);
* here for compatibility.
*/
static inline void IRAM_ATTR uart_tx_wait_idle(uint8_t uart_no) {
while(REG_GET_FIELD(UART_STATUS_REG(uart_no), UART_ST_UTX_OUT)) {
;
}
uint32_t status;
do {
status = READ_PERI_REG(UART_STATUS_REG(uart_no));
/* either tx count or state is non-zero */
} while ((status & (UART_ST_UTX_OUT_M | UART_TXFIFO_CNT_M)) != 0);
}
/**

View File

@ -159,7 +159,9 @@ static void IRAM_ATTR suspend_uarts()
{
for (int i = 0; i < 3; ++i) {
REG_SET_BIT(UART_FLOW_CONF_REG(i), UART_FORCE_XOFF);
uart_tx_wait_idle(i);
while (REG_GET_FIELD(UART_STATUS_REG(i), UART_ST_UTX_OUT) != 0) {
;
}
}
}