docs: Note that the idf target formatting filters don't work on "included" documents

This commit is contained in:
Angus Gratton 2020-01-30 13:59:12 +11:00 committed by Angus Gratton
parent 740d422134
commit 50324b505d
2 changed files with 20 additions and 3 deletions

View File

@ -19,7 +19,16 @@ The settings for the system time source are as follows:
- High-resolution timer
- None
It is recommended to stick to the default setting which provides maximum accuracy. If you want to choose a different timer, configure :ref:`CONFIG_{IDF_TARGET_CFG_PREFIX}_TIME_SYSCALL` in project configuration.
..
(Implementation note: Using only blocks in this file not IDF_CONFIG_CFG_PREFIX, until the zh_CN translation for this document is done.)
.. only:: esp32
It is recommended to stick to the default setting which provides maximum accuracy. If you want to choose a different timer, configure :ref:`CONFIG_ESP32_TIME_SYSCALL` in project configuration.
.. only:: esp32s2
It is recommended to stick to the default setting which provides maximum accuracy. If you want to choose a different timer, configure :ref:`CONFIG_ESP32S2_TIME_SYSCALL` in project configuration.
RTC Clock Source
@ -35,7 +44,13 @@ The RTC timer has the following clock sources:
- ``Internal 8.5MHz oscillator, divided by 256 (~33kHz)``. Provides better frequency stability than the ``internal 150kHz RC oscillator`` at the expense of higher (by 5 uA) deep sleep current consumption. It also does not require external components.
The choice depends on your requirements for system time accuracy and power consumption in sleep modes. To modify the RTC clock source, set :ref:`CONFIG_{IDF_TARGET_CFG_PREFIX}_RTC_CLK_SRC` in project configuration.
.. only:: esp32
The choice depends on your requirements for system time accuracy and power consumption in sleep modes. To modify the RTC clock source, set :ref:`CONFIG_ESP32_RTC_CLK_SRC` in project configuration.
.. only:: esp32s2
The choice depends on your requirements for system time accuracy and power consumption in sleep modes. To modify the RTC clock source, set :ref:`CONFIG_ESP32S2_RTC_CLK_SRC` in project configuration.
More details on wiring requirements for the ``External 32kHz crystal`` and ``External 32kHz oscillator at 32K_XP pin`` sources can be found in Section 2.1.4 *Crystal Oscillator* of `Hardware Design Guidelines <https://www.espressif.com/sites/default/files/documentation/esp32_hardware_design_guidelines_en.pdf#page=10>`_.

View File

@ -154,7 +154,9 @@ Other Extensions
This will define a replacement of the tag {\IDF_TARGET_TX_PIN} in the current rst-file.
These replacements cannot be used inside markup that rely on allignment of characters, e.g. tables.
These replacements cannot be used inside markup that rely on alignment of characters, e.g. tables.
These replacement can't be used in a file which is `::include`-ed from another file. *This includes any English document where the ``zh_CN`` translation includes then ``en`` translation*.
Related Documents
-----------------