ci(esp32c61): enable c61 generic target test

.gitlab/ci/default-build-test-rules.yml

@@ -11,7 +11,7 @@ extra_default_build_targets:
   - esp32c61
 
 bypass_check_test_targets:
-  - esp32c61
+
 #
 # These lines would
 # - enable the README.md check for esp32c6. Don't forget to add the build jobs in .gitlab/ci/build.yml

components/app_update/test_apps/pytest_app_update_ut.py

@@ -19,6 +19,8 @@ def run_multiple_stages(dut: Dut, test_case_num: int, stages: int) -> None:
 
 
 @pytest.mark.supported_targets
+# TODO: [ESP32C61] IDF-9245, IDF-9247, IDF-10983
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='C61 has not supported deep sleep')
 @pytest.mark.generic
 def test_app_update(dut: Dut) -> None:
     dut.run_all_single_board_cases(timeout=90)

components/esp_driver_gpio/test_apps/gpio_extensions/pytest_gpio_extensions.py

@@ -13,6 +13,7 @@ CONFIGS = [
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
@@ -27,6 +28,7 @@ def test_gpio_filter(dut: IdfDut) -> None:
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3

components/esp_driver_spi/test_apps/.build-test-rules.yml

@@ -9,6 +9,10 @@
 components/esp_driver_spi/test_apps/master:
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET in ["esp32c61"]
+      temporary: true
+      reason: no multi-dev runner  # TODO: [ESP32C61] IDF-10949
   <<: *spi_depends_default
 
 components/esp_driver_spi/test_apps/param:

components/esp_driver_spi/test_apps/master/pytest_spi_master.py

@@ -5,6 +5,7 @@ import pytest
 
 # If `test_env` is define, should not run on generic runner
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='test case fail')    # TODO: [ESP32C61] IDF-10949
 @pytest.mark.generic
 @pytest.mark.parametrize('config', ['defaults', 'release', 'freertos_compliance', 'freertos_flash',], indirect=True)
 def test_master_single_dev(case_tester) -> None:       # type: ignore
@@ -26,8 +27,8 @@ def test_master_esp_flash(case_tester) -> None:        # type: ignore
 
 
 # if `test_env` not defined, will run on `generic_multi_device` by default
-# TODO: [ESP32P4] IDF-9517 [ESP32C5] IDF-10322
+# TODO: [ESP32P4] IDF-9517 [ESP32C5] IDF-10322 [ESP32C61] IDF-10949
-@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5'], reason='no multi-dev runner')
+@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'], reason='no multi-dev runner')
 @pytest.mark.supported_targets
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize(

components/esp_driver_spi/test_apps/param/pytest_spi_param.py

@@ -16,8 +16,8 @@ def test_param_single_dev(case_tester) -> None:       # type: ignore
 
 
 # if `test_env` not defined, will run on `generic_multi_device` by default
-# TODO: [ESP32P4] IDF-8942 [ESP32C5] IDF-10322
+# TODO: [ESP32P4] IDF-8942 [ESP32C5] IDF-10322 [ESP32C61] IDF-10949
-@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5'], reason='no multi-dev runner')
+@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'], reason='no multi-dev runner')
 @pytest.mark.supported_targets
 @pytest.mark.esp32h2
 @pytest.mark.generic_multi_device

components/esp_driver_spi/test_apps/slave/pytest_spi_slave.py

@@ -15,8 +15,8 @@ def test_slave_single_dev(case_tester) -> None:       # type: ignore
 
 
 # if `test_env` not defined, will run on `generic_multi_device` by default
-# TODO: [ESP32P4] IDF-9517 [ESP32C5] IDF-10322
+# TODO: [ESP32P4] IDF-9517 [ESP32C5] IDF-10322 [ESP32C61] IDF-10949
-@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5'], reason='no multi-dev runner')
+@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'], reason='no multi-dev runner')
 @pytest.mark.supported_targets
 @pytest.mark.generic_multi_device
 @pytest.mark.parametrize('count, config', [(2, 'defaults'), (2, 'iram_safe')], indirect=True)

components/esp_driver_spi/test_apps/slave_hd/pytest_spi_slave_hd.py

@@ -10,6 +10,7 @@ import pytest
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32p4
 @pytest.mark.generic

components/esp_hw_support/test_apps/dma/pytest_dma.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32p4
 @pytest.mark.generic

components/esp_hw_support/test_apps/rtc_clk/pytest_rtc_clk.py

@@ -26,7 +26,7 @@ def test_rtc_no_xtal32k(dut: Dut) -> None:
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
-# TODO: [ESP32P4] IDF-8973 [ESP32C5] IDF-10309
+# TODO: [ESP32P4] IDF-8973 [ESP32C5] IDF-10309 [ESP32C61] IDF-9274 IDF-10984
-@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4', 'esp32c5'], reason='c6/h2/p4/c5 support TBD')
+@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4', 'esp32c5', 'esp32c61'], reason='support TBD')
 def test_rtc_calib(case_tester: Any) -> None:
     case_tester.run_all_multi_stage_cases()

components/esp_lcd/test_apps/.build-test-rules.yml

@@ -52,3 +52,7 @@ components/esp_lcd/test_apps/spi_lcd:
     - esp_driver_spi
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET in ["esp32c61"]
+      temporary: true
+      reason: test failed # TODO: ESP32C61 IDF-10953

components/esp_lcd/test_apps/spi_lcd/pytest_spi_lcd.py

@@ -5,6 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='test case fail')    # TODO: [ESP32C61] IDF-10953
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_pm/test_apps/esp_pm/pytest_esp_pm.py

@@ -6,6 +6,7 @@ from pytest_embedded import Dut
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='not supported yet')  # TODO: [ESP32C61] IDF-9250 IDF-10985
 @pytest.mark.parametrize('config', [
     'default',
     'slp_iram_opt',

components/esp_psram/test_apps/psram/pytest_psram.py

@@ -99,3 +99,16 @@ def test_psram_esp32p4(dut: Dut) -> None:
 )
 def test_psram_esp32c5(dut: Dut) -> None:
     dut.run_all_single_board_cases()
+
+
+@pytest.mark.esp32c61
+@pytest.mark.generic
+@pytest.mark.parametrize(
+    'config',
+    [
+        'esp32c61_release',
+    ],
+    indirect=True,
+)
+def test_psram_esp32c61(dut: Dut) -> None:
+    dut.run_all_single_board_cases()

components/esp_psram/test_apps/psram/sdkconfig.ci.esp32c61_release

@@ -0,0 +1,7 @@
+CONFIG_IDF_TARGET="esp32c61"
+
+CONFIG_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
+CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y
+
+CONFIG_SPIRAM=y

components/esp_rom/test_apps/rom_impl_components/pytest_esp_rom_impl_components.py

@@ -5,6 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9257 IDF10986
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_rom/test_apps/rom_tests/pytest_esp_rom.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32p4
 @pytest.mark.generic

components/esp_security/test_apps/.build-test-rules.yml

@@ -4,4 +4,4 @@ components/esp_security/test_apps/crypto_drivers:
   disable:
     - if: IDF_TARGET in ["esp32c61"]
       temporary: true
-      reason: Support for ESP32C6 is yet to be added.
+      reason: Support for ESP32C61 is yet to be added.

components/esp_security/test_apps/crypto_drivers/pytest_crypto_drivers.py

@@ -5,6 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.generic
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='Support for ESP32C61 is yet to be added.')  # TODO: [ESP32C61] IDF-10987
 @pytest.mark.parametrize(
     'config',
     [

components/esp_system/test_apps/esp_system_unity_tests/pytest_esp_system_unity_tests.py

@@ -5,6 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.generic
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='test case fail')    # TODO: IDF-10954
 @pytest.mark.parametrize(
     'config',
     [

components/esp_timer/test_apps/main/test_esp_timer.c

@@ -388,6 +388,7 @@ TEST_CASE("esp_timer for very short intervals", "[esp_timer]")
     vTaskDelay(3); // wait for the esp_timer task to delete all timers
 }
 
+#if !CONFIG_IDF_TARGET_ESP32C61 // TODO: IDF-10955, test fail
 TEST_CASE("esp_timer_get_time call takes less than 1us", "[esp_timer]")
 {
     int64_t begin = esp_timer_get_time();
@@ -399,6 +400,7 @@ TEST_CASE("esp_timer_get_time call takes less than 1us", "[esp_timer]")
     int ns_per_call = (int)((end - begin) * 1000 / iter_count);
     TEST_PERFORMANCE_LESS_THAN(ESP_TIMER_GET_TIME_PER_CALL, "%dns", ns_per_call);
 }
+#endif
 
 static int64_t IRAM_ATTR __attribute__((noinline)) get_clock_diff(void)
 {

components/freertos/test_apps/freertos/pytest_freertos.py

@@ -15,6 +15,7 @@ CONFIGS = [
 ]
 
 
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-10988
 @pytest.mark.generic
 @pytest.mark.parametrize('config', CONFIGS, indirect=True)
 def test_freertos(dut: Dut) -> None:
@@ -22,6 +23,7 @@ def test_freertos(dut: Dut) -> None:
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-10988
 @pytest.mark.generic
 @pytest.mark.parametrize('config', ['freertos_options'], indirect=True)
 def test_task_notify_too_high_index_fails(dut: Dut) -> None:
@@ -33,6 +35,7 @@ def test_task_notify_too_high_index_fails(dut: Dut) -> None:
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-10988
 @pytest.mark.generic
 @pytest.mark.parametrize('config', ['freertos_options'], indirect=True)
 def test_task_notify_wait_too_high_index_fails(dut: Dut) -> None:
@@ -44,6 +47,7 @@ def test_task_notify_wait_too_high_index_fails(dut: Dut) -> None:
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-10988
 @pytest.mark.generic
 @pytest.mark.parametrize('config', ['default'], indirect=True)
 def test_port_must_assert_in_isr(dut: Dut) -> None:

components/heap/test_apps/heap_tests/pytest_heap.py

@@ -6,6 +6,7 @@ from pytest_embedded import Dut
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9858 IDF-10989
 @pytest.mark.nightly_run
 @pytest.mark.parametrize(
     'config',
@@ -39,6 +40,7 @@ def test_heap_poisoning_qemu(dut: Dut) -> None:
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9858 IDF-10989
 @pytest.mark.parametrize(
     'config',
     [
@@ -101,6 +103,7 @@ def test_heap_trace_dump(dut: Dut) -> None:
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9858 IDF-10989
 @pytest.mark.parametrize(
     'config',
     [

components/newlib/test_apps/newlib/pytest_newlib.py

@@ -31,6 +31,7 @@ def validate_sbom(dut: Dut) -> None:
 
 
 @pytest.mark.generic
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [esp32c61] IDF-9284 IDF-10990
 @pytest.mark.parametrize(
     'config',
     [

components/spi_flash/test_apps/.build-test-rules.yml

@@ -23,7 +23,7 @@ components/spi_flash/test_apps/esp_flash_stress:
 
 components/spi_flash/test_apps/flash_encryption:
   disable_test:
-    - if: IDF_TARGET in ["esp32c2", "esp32s2", "esp32c6", "esp32h2", "esp32p4", "esp32c5"]
+    - if: IDF_TARGET in ["esp32c2", "esp32s2", "esp32c6", "esp32h2", "esp32p4", "esp32c5", "esp32c61"]
       temporary: true
       reason: No runners # IDF-5634
 

components/spi_flash/test_apps/esp_flash/pytest_esp_flash.py

@@ -5,7 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c5'], reason='not support yet')  # TODO: [ESP32C5] IDF-8715, IDF-10313
+@pytest.mark.temp_skip_ci(targets=['esp32c5', 'esp32c61'], reason='not support yet')  # TODO: [ESP32C5] IDF-8715, IDF-10313, [ESP32C61] IDF-9314 IDF-10991
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/spi_flash/test_apps/mspi_test/pytest_mspi_test.py

@@ -4,7 +4,8 @@ import pytest
 from pytest_embedded import Dut
 
 
-@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5'], reason='esp32p4, esp32c5 support TBD')  # TODO: [ESP32P4] IDF-8985 [ESP32C5] IDF-8715, IDF-10313
+# TODO: [ESP32P4] IDF-8985 [ESP32C5] IDF-8715, IDF-10313, [ESP32C61] IDF-9314 IDF-10991
+@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'], reason='esp32p4, esp32c5 support TBD')
 @pytest.mark.supported_targets
 @pytest.mark.generic
 @pytest.mark.parametrize(

components/wpa_supplicant/test_apps/pytest_wpa_supplicant_ut.py

@@ -12,6 +12,7 @@ from pytest_embedded_idf.unity_tester import CaseTester
 @pytest.mark.esp32c3
 @pytest.mark.esp32c2
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32c5
 def test_wpa_supplicant_ut(dut: Dut) -> None:
     dut.run_all_single_board_cases()

examples/peripherals/timer_group/wiegand_interface/pytest_wiegand.py

@@ -8,6 +8,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3

examples/security/.build-test-rules.yml

@@ -2,7 +2,7 @@
 
 examples/security/flash_encryption:
   disable_test:
-    - if: IDF_TARGET in ["esp32s2", "esp32s3", "esp32c6", "esp32h2", "esp32c2", "esp32p4", "esp32c5"]
+    - if: IDF_TARGET in ["esp32s2", "esp32s3", "esp32c6", "esp32h2", "esp32c2", "esp32p4", "esp32c5", "esp32c61"]
       temporary: true
       reason: lack of runners
 

examples/storage/perf_benchmark/pytest_perf_benchmark_example.py

@@ -5,7 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c5'], reason='not support yet')  # TODO: [ESP32C5] IDF-8704, IDF-10314
+@pytest.mark.temp_skip_ci(targets=['esp32c5', 'esp32c61'], reason='not support yet')  # TODO: [ESP32C5] IDF-10314 [ESP32C61] IDF-10977
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

examples/system/.build-test-rules.yml

@@ -2,11 +2,15 @@
 
 examples/system/app_trace_basic:
   disable:
-    - if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4", "esp32c5"]
+    - if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4", "esp32c5", "esp32c61"]
       temporary: true
-      reason: target esp32c6, esp32h2, esp32p4, esp32c5 is not supported yet
+      reason: targets not supported yet, TODO[C61] IDF-9264 IDF-10992
 
 examples/system/base_mac_address:
+  disable_test:
+    - if: IDF_TARGET in ["esp32c61"]
+      temporary: true
+      reason: test failed # TODO: IDF-10956
   depends_components:
     - esp_hw_support
 

examples/system/app_trace_basic/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C61 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | --------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- |
 
 # Application Level Tracing Example (Basic)
 

examples/system/base_mac_address/pytest_base_mac_address.py

@@ -5,6 +5,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='test case fail')    # TODO: IDF-10956
 @pytest.mark.generic
 def test_base_mac_address(dut: Dut) -> None:
     def get_hex_r(num_bytes: int) -> str:

examples/system/efuse/pytest_system_efuse_example.py

@@ -50,6 +50,7 @@ def test_examples_efuse_linux(dut: Dut) -> None:
 @pytest.mark.esp32c2
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
+@pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
@@ -150,6 +151,7 @@ def test_examples_efuse_with_virt_flash_enc_aes_256(dut: Dut) -> None:
 @pytest.mark.esp32c2
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
+@pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
@@ -226,6 +228,7 @@ def test_examples_efuse_with_virt_flash_enc_pre_loaded(dut: Dut) -> None:
 @pytest.mark.esp32c2
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
+@pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
@@ -565,7 +568,7 @@ def test_examples_efuse_with_virt_secure_boot_v2_pre_loaded(dut: Dut) -> None:
 @pytest.mark.esp32c2
 # TODO: [ESP32C5] IDF-10043
 # @pytest.mark.esp32c5
-# TODO: [ESP32C5] IDF-10102
+# TODO: [ESP32C61] IDF-10102
 # @pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
@@ -642,7 +645,7 @@ def test_examples_efuse_with_virt_secure_boot_v2_esp32xx(dut: Dut) -> None:
 @pytest.mark.esp32c2
 # TODO: [ESP32C5] IDF-10043
 # @pytest.mark.esp32c5
-# TODO: [ESP32C5] IDF-10102
+# TODO: [ESP32C61] IDF-10102
 # @pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
@@ -953,6 +956,7 @@ def test_examples_efuse_with_virt_sb_v2_and_fe_qemu(dut: QemuDut) -> None:
 @pytest.mark.esp32c3
 @pytest.mark.esp32c2
 @pytest.mark.esp32c5
+@pytest.mark.esp32c61
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2

examples/system/esp_timer/pytest_esp_timer.py

@@ -28,6 +28,8 @@ ONE_SHOT_TIMER_PERIOD = 5000000
 
 
 @pytest.mark.supported_targets
+# TODO: [ESP32C61] IDF-10993
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='C61 has not supported light sleep')
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

examples/system/light_sleep/pytest_light_sleep.py

@@ -8,6 +8,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='not supported light sleep')  # TODO: [ESP32C61] IDF-9247 IDF-10993
 @pytest.mark.generic
 def test_light_sleep(dut: Dut) -> None:
 

tools/ci/dynamic_pipelines/templates/known_generate_test_child_pipeline_warnings.yml

@@ -14,6 +14,7 @@ no_runner_tags:
   - esp32c3,sdcard_sdmode
   - esp32c5,jtag
   - esp32c6,jtag
+  - esp32c61,jtag
   - esp32h2,jtag
   - esp32p4,jtag
   - esp32s2,usb_host_flash_disk

tools/ci/idf_pytest/constants.py

@@ -16,7 +16,7 @@ from idf_ci_utils import IDF_PATH
 from idf_ci_utils import idf_relpath
 from pytest_embedded.utils import to_list
 
-SUPPORTED_TARGETS = ['esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6', 'esp32h2', 'esp32p4', 'esp32c5']
+SUPPORTED_TARGETS = ['esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6', 'esp32h2', 'esp32p4', 'esp32c5', 'esp32c61']
 PREVIEW_TARGETS: t.List[str] = []  # this PREVIEW_TARGETS excludes 'linux' target
 DEFAULT_SDKCONFIG = 'default'
 DEFAULT_LOGDIR = 'pytest-embedded'
@@ -31,12 +31,12 @@ TARGET_MARKERS = {
     'esp32c6': 'support esp32c6 target',
     'esp32h2': 'support esp32h2 target',
     'esp32p4': 'support esp32p4 target',
+    'esp32c61': 'support esp32c61 target',
     'linux': 'support linux target',
 }
 
 SPECIAL_MARKERS = {
-    'supported_targets': 'support all officially announced supported targets '
+    'supported_targets': 'support all officially announced supported targets, refer to `SUPPORTED_TARGETS`',
-                         "('esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6', 'esp32p4', 'esp32c5')",
     'preview_targets': "support all preview targets ('none')",
     'all_targets': 'support all targets, including supported ones and preview ones',
     'temp_skip_ci': 'temp skip tests for specified targets only in ci',

tools/test_apps/system/.build-test-rules.yml

@@ -29,6 +29,10 @@ tools/test_apps/system/eh_frame:
       reason: Only relevant for riscv targets
 
 tools/test_apps/system/esp_intr_dump:
+  disable_test:
+    - if: IDF_TARGET in ["esp32c61"]
+      temporary: true
+      reason: test failed # TODO: IDF-10957
 
 tools/test_apps/system/g0_components:
   enable:

tools/test_apps/system/eh_frame/pytest_eh_frame.py

@@ -8,6 +8,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32p4
 @pytest.mark.generic
@@ -23,6 +24,7 @@ def test_eh_frame_wdt(dut: Dut) -> None:
 @pytest.mark.esp32c3
 @pytest.mark.esp32c5
 @pytest.mark.esp32c6
+@pytest.mark.esp32c61
 @pytest.mark.esp32h2
 @pytest.mark.esp32p4
 @pytest.mark.generic

tools/test_apps/system/esp_intr_dump/pytest_esp_intr_dump.py

@@ -48,6 +48,7 @@ def test_esp_intr_dump_shared(dut: Dut) -> None:
 
 # TODO: IDF-9512, Update the expected output of dual core RISC-V chips when the issue is resolved
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='test case fail')    # TODO: IDF-10957
 @pytest.mark.generic
 def test_esp_intr_dump_expected_output(dut: Dut) -> None:
     dut.expect_exact(PROMPT, timeout=30)

tools/test_apps/system/panic/pytest_panic.py

@@ -584,6 +584,7 @@ def cache_error_log_check(dut: PanicTestDut) -> None:
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9268 IDF-10994
 @pytest.mark.parametrize('config', ['panic'], indirect=True)
 def test_assert_cache_write_back_error_can_print_backtrace(
     dut: PanicTestDut, config: str, test_func_name: str
@@ -594,6 +595,7 @@ def test_assert_cache_write_back_error_can_print_backtrace(
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32c61'], reason='support TBD')  # TODO [ESP32C61] IDF-9268 IDF-10994
 @pytest.mark.parametrize('config', ['panic'], indirect=True)
 def test_assert_cache_write_back_error_can_print_backtrace2(
     dut: PanicTestDut, config: str, test_func_name: str

tools/test_apps/system/ram_loadable_app/pytest_ram_loadable_app.py

@@ -13,7 +13,8 @@ def test_pure_ram_loadable_app(dut: IdfDut) -> None:
     dut.expect('Time since boot: 3 seconds...', timeout=10)
 
 
-@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5'], reason='esp32p4, esp32c5 support TBD')  # TODO: [ESP32P4] IDF-8994 [ESP32C5] IDF-8644, IDF-10315
+# TODO: [ESP32P4] IDF-8994 [ESP32C5] IDF-8644, IDF-10315, [ESP32C61] IDF-10951
+@pytest.mark.temp_skip_ci(targets=['esp32p4', 'esp32c5', 'esp32c61'], reason='support TBD')
 @pytest.mark.supported_targets
 @pytest.mark.generic
 @pytest.mark.parametrize('config', ['defaults',], indirect=True,)