refactor(spi_flash): Refactor the flash frequency config file

components/esptool_py/Kconfig.projbuild

@@ -89,71 +89,7 @@ menu "Serial flasher config"
         # information get from efuse, so don't care this dout choice.
         default "dout" if ESPTOOLPY_FLASHMODE_OPI
 
-    choice ESPTOOLPY_FLASHFREQ
-        prompt "Flash SPI speed"
-        default ESPTOOLPY_FLASHFREQ_40M if IDF_TARGET_ESP32
-        default ESPTOOLPY_FLASHFREQ_80M if ESPTOOLPY_FLASHFREQ_80M_DEFAULT
-        default ESPTOOLPY_FLASHFREQ_60M if IDF_TARGET_ESP32C2
-        config ESPTOOLPY_FLASHFREQ_120M
-            bool "120 MHz (READ DOCS FIRST)"
-            depends on SOC_MEMSPI_SRC_FREQ_120M && \
-                (SPI_FLASH_HPM_ON || ESPTOOLPY_OCT_FLASH) && \
-                (ESPTOOLPY_FLASH_SAMPLE_MODE_STR || IDF_EXPERIMENTAL_FEATURES)
-            help
-                - Optional feature for QSPI Flash. Read docs and enable `CONFIG_SPI_FLASH_HPM_ENA` first!
-                - Flash 120 MHz SDR mode is stable.
-                - Flash 120 MHz DDR mode is an experimental feature, it works when
-                  the temperature is stable.
-
-                    Risks:
-                        If your chip powers on at a certain temperature, then after the temperature
-                        increases or decreases by approximately 20 Celsius degrees (depending on the
-                        chip), the program will crash randomly.
-
-        config ESPTOOLPY_FLASHFREQ_80M
-            bool "80 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED && !ESP32P4_REV_MIN_0 # TODO IDF-10488
-        config ESPTOOLPY_FLASHFREQ_64M
-            bool "64 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_64M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_60M
-            bool "60 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_60M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_48M
-            bool "48 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_48M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_40M
-            bool "40 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_32M
-            bool "32 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_32M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_30M
-            bool "30 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_30M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_26M
-            bool "26 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_24M
-            bool "24 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_24M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_20M
-            bool "20 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_16M
-            bool "16 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_16M_SUPPORTED
-        config ESPTOOLPY_FLASHFREQ_15M
-            bool "15 MHz"
-            depends on SOC_MEMSPI_SRC_FREQ_15M_SUPPORTED
-    endchoice
-
-    config ESPTOOLPY_FLASHFREQ_80M_DEFAULT
-        bool
-        default y if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C6
-        default y if IDF_TARGET_ESP32C5 || IDF_TARGET_ESP32C61
-        help
-            This is an invisible item, used to define the targets that defaults to use 80MHz Flash SPI speed.
+    orsource "../spi_flash/$IDF_TARGET/Kconfig.flash_freq"
 
     config ESPTOOLPY_FLASHFREQ
         string

components/spi_flash/esp32/Kconfig.flash_freq

@@ -0,0 +1,12 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_40M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_26M
+        bool "26 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32c2/Kconfig.flash_freq

@@ -0,0 +1,12 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_60M
+    config ESPTOOLPY_FLASHFREQ_60M
+        bool "60 MHz"
+    config ESPTOOLPY_FLASHFREQ_30M
+        bool "30 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+    config ESPTOOLPY_FLASHFREQ_15M
+        bool "15 MHz"
+endchoice

components/spi_flash/esp32c3/Kconfig.flash_freq

@@ -0,0 +1,12 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_26M
+        bool "26 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32c5/Kconfig.flash_freq

@@ -0,0 +1,10 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32c5/Kconfig.soc_caps.in

@@ -0,0 +1,8 @@
+#####################################################
+# This file is auto-generated from SoC caps
+# using gen_soc_caps_kconfig.py, do not edit manually
+#####################################################
+
+config SPI_FLASH_VENDOR_XMC_SUPPORTED
+    bool
+    default y

components/spi_flash/esp32c5/flash_vendor_caps.h

@@ -0,0 +1,8 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#define SPI_FLASH_VENDOR_XMC_SUPPORTED       (1)

components/spi_flash/esp32c6/Kconfig.flash_freq

@@ -0,0 +1,10 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32c61/Kconfig.flash_freq

@@ -0,0 +1,10 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32c61/Kconfig.soc_caps.in

@@ -0,0 +1,8 @@
+#####################################################
+# This file is auto-generated from SoC caps
+# using gen_soc_caps_kconfig.py, do not edit manually
+#####################################################
+
+config SPI_FLASH_VENDOR_XMC_SUPPORTED
+    bool
+    default y

components/spi_flash/esp32c61/flash_vendor_caps.h

@@ -0,0 +1,8 @@
+/*
+ * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#define SPI_FLASH_VENDOR_XMC_SUPPORTED       (1)

components/spi_flash/esp32h2/Kconfig.flash_freq

@@ -0,0 +1,10 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_64M
+    config ESPTOOLPY_FLASHFREQ_64M
+        bool "64 MHz"
+    config ESPTOOLPY_FLASHFREQ_32M
+        bool "32 MHz"
+    config ESPTOOLPY_FLASHFREQ_16M
+        bool "16 MHz"
+endchoice

components/spi_flash/esp32p4/Kconfig.flash_freq

@@ -0,0 +1,12 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_40M if ESP32P4_REV_MIN_0
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+        depends on !ESP32P4_REV_MIN_0
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32s2/Kconfig.flash_freq

@@ -0,0 +1,12 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_26M
+        bool "26 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

components/spi_flash/esp32s3/Kconfig.flash_freq

@@ -0,0 +1,23 @@
+choice ESPTOOLPY_FLASHFREQ
+    prompt "Flash SPI speed"
+    default ESPTOOLPY_FLASHFREQ_80M
+    config ESPTOOLPY_FLASHFREQ_120M
+        bool "120 MHz (READ DOCS FIRST)"
+        depends on (SPI_FLASH_HPM_ON || ESPTOOLPY_OCT_FLASH) && \
+            (ESPTOOLPY_FLASH_SAMPLE_MODE_STR || IDF_EXPERIMENTAL_FEATURES)
+        help
+            - Optional feature for QSPI Flash. Read docs and enable `CONFIG_SPI_FLASH_HPM_ENA` first!
+            - Flash 120 MHz SDR mode is stable.
+            - Flash 120 MHz DDR mode is an experimental feature, it works when
+              the temperature is stable.
+                Risks:
+                    If your chip powers on at a certain temperature, then after the temperature
+                    increases or decreases by approximately 20 Celsius degrees (depending on the
+                    chip), the program will crash randomly.
+    config ESPTOOLPY_FLASHFREQ_80M
+        bool "80 MHz"
+    config ESPTOOLPY_FLASHFREQ_40M
+        bool "40 MHz"
+    config ESPTOOLPY_FLASHFREQ_20M
+        bool "20 MHz"
+endchoice

examples/storage/perf_benchmark/sdkconfig.ci.spiflash

@@ -9,9 +9,6 @@ CONFIG_FATFS_VFS_FSTAT_BLKSIZE=4096
 # SPI flash
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHMODE="qio"
-CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y
-CONFIG_ESPTOOLPY_FLASHFREQ="80m"
 CONFIG_EXAMPLE_TEST_SPIFLASH=y
 
 # SD card

examples/storage/perf_benchmark/sdkconfig.defaults

@@ -13,7 +13,4 @@ CONFIG_LITTLEFS_SDMMC_SUPPORT=y
 # SPI flash
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHMODE="qio"
-CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y
-CONFIG_ESPTOOLPY_FLASHFREQ="80m"
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y

examples/system/startup_time/sdkconfig.defaults

@@ -2,7 +2,6 @@
 #
 # (Not all hardware may support this configuration.)
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
-CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 
 # These two settings mean that no logs are printed
 # during startup, but it's possible to use esp_log_level_set("*", ESP_LOG_INFO)

tools/test_apps/system/startup/sdkconfig.ci.flash_80m_qio

@@ -1,2 +1 @@
-CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y