ci(esp_eth): increased L2 test wait for connection timeout

This commit is contained in:
Ondrej Kosta 2024-03-12 09:09:40 +01:00
parent 9da552c409
commit 2ffeffddc6

View File

@ -12,20 +12,21 @@
#include "arpa/inet.h" // for ntohs, etc.
#include "esp_log.h"
#define TEST_ETH_TYPE 0x3300
#define TEST_CTRL_ETH_TYPE (TEST_ETH_TYPE + 1)
#define TEST_ETH_TYPE 0x3300
#define TEST_CTRL_ETH_TYPE (TEST_ETH_TYPE + 1)
#define WAIT_AFTER_CONN_MS 2500
#define WAIT_AFTER_CONN_TMO_MS 20000
#define WAIT_FOR_CONN_TMO_MS (5000)
#define WAIT_AFTER_CONN_MS (2500)
#define WAIT_AFTER_CONN_TMO_MS (20000)
#define ETH_BROADCAST_RECV_BIT BIT(0)
#define ETH_MULTICAST_RECV_BIT BIT(1)
#define ETH_UNICAST_RECV_BIT BIT(2)
#define ETH_POKE_RESP_RECV_BIT BIT(3)
#define ETH_BROADCAST_RECV_BIT BIT(0)
#define ETH_MULTICAST_RECV_BIT BIT(1)
#define ETH_UNICAST_RECV_BIT BIT(2)
#define ETH_POKE_RESP_RECV_BIT BIT(3)
#define POKE_REQ 0xFA
#define POKE_RESP 0xFB
#define DUMMY_TRAFFIC 0xFF
#define POKE_REQ (0xFA)
#define POKE_RESP (0xFB)
#define DUMMY_TRAFFIC (0xFF)
#define W5500_RX_MEM_SIZE (0x4000)
#define DM9051_RX_MEM_SIZE (0x4000)
@ -160,7 +161,7 @@ TEST_CASE("ethernet broadcast transmit", "[ethernet_l2]")
TEST_ESP_OK(esp_eth_start(eth_handle)); // start Ethernet driver state machine
EventBits_t bits = 0;
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(3000));
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(WAIT_FOR_CONN_TMO_MS));
TEST_ASSERT((bits & ETH_CONNECT_BIT) == ETH_CONNECT_BIT);
// if DUT is connected in network with switch: even if link is indicated up, it may take some time the switch
// starts switching the associated port (e.g. it runs RSTP at first)
@ -224,7 +225,7 @@ TEST_CASE("ethernet recv_pkt", "[ethernet_l2]")
TEST_ESP_OK(esp_eth_start(eth_handle)); // start Ethernet driver state machine
EventBits_t bits = 0;
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(3000));
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(WAIT_FOR_CONN_TMO_MS));
TEST_ASSERT((bits & ETH_CONNECT_BIT) == ETH_CONNECT_BIT);
// if DUT is connected in network with switch: even if link is indicated up, it may take some time the switch
// starts switching the associated port (e.g. it runs RSTP at first)
@ -303,7 +304,7 @@ TEST_CASE("ethernet start/stop stress test under heavy traffic", "[ethernet_l2]"
for (int tx_i = 0; tx_i < 10; tx_i++) {
printf("Tx Test iteration %d\n", tx_i);
TEST_ESP_OK(esp_eth_start(eth_handle)); // start Ethernet driver state machine
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(3000));
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(WAIT_FOR_CONN_TMO_MS));
TEST_ASSERT((bits & ETH_CONNECT_BIT) == ETH_CONNECT_BIT);
// at first, check that Tx/Rx path works as expected by poking the test script
// this also serves as main PASS/FAIL criteria
@ -332,7 +333,7 @@ TEST_CASE("ethernet start/stop stress test under heavy traffic", "[ethernet_l2]"
for (int rx_i = 0; rx_i < 10; rx_i++) {
printf("Rx Test iteration %d\n", rx_i);
TEST_ESP_OK(esp_eth_start(eth_handle)); // start Ethernet driver state machine
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(3000));
bits = xEventGroupWaitBits(eth_event_state_group, ETH_CONNECT_BIT, true, true, pdMS_TO_TICKS(WAIT_FOR_CONN_TMO_MS));
TEST_ASSERT((bits & ETH_CONNECT_BIT) == ETH_CONNECT_BIT);
poke_and_wait(eth_handle, &rx_i, sizeof(rx_i), NULL, eth_event_rx_group);